Wireless Gamepad

OPERATION
MANUAL

combaT www.sven.ѵ
 ENG

Operation Manual combaT

Congratulations on your purchase of the Sven gamepad!

Please read this Operation Manual before using the unit and retain this Operation Manual in a safe
place for future reference.

COPYRIGHT
© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS
All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted eԚorts to make this Manual more exact, some discrepancies may occur. The
information of this Manual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damage which has arisen from the information
contained in this Manual.

UNPACKING
Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device
for damage; if the product was damaged during transportation, address the ԛrm which carried out
the delivery; if the product functions incorrectly, address the dealer at once.

CONTENTS
1. DESCRIPTION .................................................................................. 2
2. SAFETY PRECAUTIONS ...................................................................... 2
3. PACKAGE CONTENTS ....................................................................... 2
4. SPECIAL FEATURES ........................................................................... 2
5. SYSTEM REQUIREMENTS .................................................................... 2
6. DESCRIPTION OF THE DžONSTRUCTION .................................................... 3
7. CONNECTION AND INSTALLATION ........................................................ 5
8. TROUBLESHOOTING ............................................................... . . . . . . . . 8

Technical support is on www.sven.Н

1
ENG

Wireless Gamepad

1. DESCRIPTION
COMBAT Wireless Gamepad can be used in diԚerent games such as simulators, arcades, shooter
games, etc. Vibration feedback imparts a feeling of realistic experience during games. Ergonomic
construction of COMBAT enhances accuracy of its operation during games.

2. SAFETY PRECAUTIONS
• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out
by qualiԛed service center staԚ only.
• Protect the device from direct impact of high humidity, dust, strong magnetic ԛelds, vibrations, high
temperatures, toxic liquids and gases.
• Instructions for device maintenance: please clean the case of the device with clean soft cloth. Do
not use such solvents as gasoline or spirit for cleaning, since they can damage the surface of the
device.
• Do not drop the device to avoid damaging it.

3. PACKAGE CONTENTS
• Gamepad — 1 pc
• 2.4 GHz receiver — 1 pc
• ƴƴƴ type battery — 4 pcs
• Setup CD disk —1 pc
• Operation manual — 1 pc
• Warranty card — 1 pc

4. SPECIAL FEATURES
• Ergonomic design
• Supports DirectX 7.0 and up, Windows XP/Vista/7/8
• USB Interface
• 2.4 GHz receiver with coverage range up to 7 m
• Vibration feedback function for higher realistic eԚect
• Turbo function for continuous ԛring
• 4 axes, D-Pad, 2 joysticks and 12 buttons
• FC button for connecting the gamepad to the receiver
• 4 ƴƴƴ type batteries included
• 2 modes: digital mode and analog mode

5. SYSTEM REQUIREMENTS
• USB port available
• Windows XP/Vista/7/8 OS
• DirectX 7.0 Version and up

2
 ENG

Operation Manual combaT

6. DESCRIPTION OF THE CONCTRUCTION

a D-pad a b c d e f g
b TURBO: turbo mode
on/oԚ switch
c Button 9
d MACRO: reprogramming
of buttons
e Button10
f FC: button for connecting
the gamepad to the receiver
g Buttons 1–4
h Left joystick (button 11)
i Mode LED
j MODE: mode switch button
k Right joystick (button 12)
l Button 6
m Button 8
n Button 5 h ij k
o Button 7
p POWER: power on/oԚ switch
q Batteries
r Battery compartment
s VIBRATION: vibration Fig. 1. Top view
on/oԚ switch
t Battery compartment cover
u USB cable
v FC: button for connecting
the gamepad to the receiver
w Connection LED

l n

m o

Fig. 2. Rear view

3
ENG

Wireless Gamepad

p q r s

Fig. 3. Bottom view

Installing batteries
• Open the cover t of the battery compart-
ment r.
• Install AAA type batteries q into the battery
compartment following their polarity.
v
• Close the cover of the battery compartment.
Note! Always install a set of the same new
batteries. Incorrect installation of batteries
may damage the gamepad!

Fig. 4. Receiver

4
 ENG

Operation Manual combaT

7. CONNECTION AND INSTALLATION

Ϝ After installation of batteries 2 connect the 2.4GHz receiver via the USB cable 6 to an available
USB port of your PC. After connecting to your PC, the device is automatically detected as a game
controller and is fully ready for use. However, for Vibration Feedback function it is necessary to
install drivers. Calibration of the second joystick is also impossible without the installation of drivers.
Ϝ Shift the POWER ON/OFF switch 1 into the ON position. To connect the gamepad to the receiver
for the ԛrst time, press the FC button on the receiver 7, its LED 8 will light up, then press the FC
button ' on the gamepad. There is also another way to connect the gamepad to the receiver: press
the FC button on the receiver, then press the combination of buttons 9+11 simultaneously on the
gamepad and hold these buttons for 15 seconds. Pay attention: the receiver and the gamepad will
be disconnected if the gamer presses one of 9+11 buttons after the connection has been made.
Ϝ Insert Software CD disk into your PC CD Rom and start setup.exe to install the drivers. To test the
gamepad and make adjustments, choose a Control Panel -> Devices and Printers (Control Panel ->
Devices and Printers), click the right mouse button on the icon of Gamepad and clickl at Parameters.
Properties (Fig. 5) window will open up on your desktop.
Ϝ Click Function Test (Fig. 5) to test axes and buttons.

Fig. 5

5
ENG

Wireless Gamepad

Fig. 6

• Enter Calibration Function (Fig. 6) to calibrate all four axes.

• Enter Vibration Test (see Fig. 7) to test and set Vibration Feedback function:
• increase or reduce vibration strength by moving the cursor. For example: vibration strength is
85% in Fig. 7;
• test Vibration Feedback function on the left or/and right motors by pressing Left force, Both force
and Right force;
• after setting and testing, press ǂƾ (conԛrm) at the bottom of the window.
Notice! Vibration Feedback function is switched ON or OFF with the VIBRATION ON/OFF
switch s.

6
 ENG

Operation Manual combaT

Fig. 7

• Switching between modes

The device can work in the analog and digital modes. The modes are switched with the MODE
buttonj. In the analog mode (red LED) all 4 axes and 12 buttons are accessible, in the digital mode
(LED is oԚ) 2 axes and 10 buttons are accessible.
Switch on the Macro mode with the button d to reprogram buttons or analog joysticks to other
functions. LED will be green or orange (if the analog mode is on). Then press a button, the function
of which should be changed, then press a button or buttons, to which functions the programmed
button should be changed, and press Macro again to quit the program mode. Press Macro and the
button, which has been programmed, to switch oԚ. Everything being reprogrammed will store in the
Gamepad memory, and when the device is oԚ the settings are not reset.

7
ENG

Wireless Gamepad

• TURBO function (continuous shooting)

The Turbo function is designed to imitate multiple pressing with one-time pressing and holding of
any button. Press any button from 1 to 12 to activate the function, then, hold it and press the TURBO
button b . Now the button will function in the TURBO mode. Fulԛll the similar actions as for
activation to cancel the TURBO function: press the button which works in the TURBO mode, hold it
and press the TURBO button b.

7. TROUBLESHOOTING
Problem Solution

The gamepad does not work ƴ. Check whether the gamepad is connected properly to
normally after installation of your PC.
drivers on the PC. B. Make sure that all the settings in Game Controller are
installed and conԛrmed.
C. Check whether the settings of the gamepad are in conԜict
with other peripherals.
D. Restart your PC if the device still does not work normally.
Drivers can’t be installed on the Install DirectX 7.0 or higher.
PC.
Some analog axis goes into The gamepad hasn’t been calibrated or the calibration
eԚect automatically. hasn’t been conԛrmed.
After the gamepad is con- Enter My computer о Properties о Hardware о Device
nected, its driving program manager and delete the corresponding equipment with «!»
can’t be found. mark and reconnect the gamepad to the PC. Then your PC
will ԛnd the driving system.
After entering the game, Enter Force Feedback and calibrate it.
vibration feedback function
operates automatically.
During the game vibration Enter Force Feedback and set the force of feedback.
feedback is insuԝcient.

If none of the above mentioned solutions removes the problem, please consult your nearest
authorized service center. Never try to repair the device on your own.

8
Wireless Gamepad

ǀǢǘǙǟǰ: COMBAT
ƼǠǣǢǤǦǙǤ ǖ DŽǢǥǥǜǜ: ǂǂǂ «DžƾƴǁƸƼdžDŽƹƿ», 111024,
DŽLj, Ǘ. ǀǢǥǞǖǔ, ǧǟ. ƴǖǜǔǠǢǦǢǤǡǔdz, ǘ. 65, ǥǦǤ. 1.
LJǣǢǟǡǢǠǢǫǙǡǡǔdz ǢǤǗǔǡǜǛǔǪǜdz ǖ DŽǢǥǥǜǜ:
ǂǂǂ «DŽdž-Lj», 105082, Ǘ. ǀǢǥǞǖǔ, ǧǟ. LjǤǜǘǤǜǩǔ
ǑǡǗǙǟǰǥǔ, ǘ. 75, ǥǦǤ. 5.
LJǥǟǢǖǜdz ǗǔǤǔǡǦǜǝǡǢǗǢ ǢǕǥǟǧǚǜǖǔǡǜdz ǥǠǢǦǤǜǦǙ
ǖ ǗǔǤǔǡǦǜǝǡǢǠ ǦǔǟǢǡǙ ǜǟǜ ǡǔ ǥǔǝǦǙ www.sven.ѵ.
ƷǔǤǔǡǦǜǝǡǯǝ ǥǤǢǞ: 12 ǠǙǥ. DžǤǢǞ ǥǟǧǚǕǯ: 2 ǗǢǘǔ.
ǃǤǢǜǛǖǢǘǜǦǙǟǰ: «Džƶƹǁ ǃdžƹ. ƿǜǠǜǦǙǘ»,
176 Ƹǚǧ NjǜǔǦ DŽǢǧǘ, д 02-02, DžǜǡǗǔǣǧǤ, 427447.
ǃǤǢǜǛǖǙǘǙǡǢ ǣǢǘ ǞǢǡǦǤǢǟǙǠ «DžǖǙǡ DžǞǔǡǘǜǡǔǖǜdz
ƿǜǠǜǦǙǘ», 48310, Ljǜǡǟdzǡǘǜdz, ƾǢǦǞǔ,
ƾǢǦǢǟǔǩǘǙǡǦǜǙ, 15. DžǘǙǟǔǡǢ ǖ ƾǜǦǔǙ.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,

д 02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland. combaT