DC Multifunction Meter Technical parameter

Technical parameters Indicators

Voltage
Current input
input range

Nominal value DC 0-1000V Shunt：0-75mV；

See the physical Hall sensor：0-20mA、4-20mA、
Input wiring diagram 0-5V，0-10V and so on.
Overload 1.2 times rated (continuous); 2 times rated/1 second;
Power
Voltage: ≤0.2VA, current ≤0.1VA
consumption
Accuracy class Class 1

General Display 8-bit segment LCD screen (LCD)

Communication
RS485, infrared
Interface
SAITEC have rail-mounted DC power meter with double DC input
Communication
Modbus-RTU，DL/T 645-2007
channels, designed for telecommunications base stations, DC charging protocol

piles, solar photovoltaic and other applications, this series of meters can Switch output 2 Relay outputs, 2A/30VDC or 2A/250VAC
Function Switch
measure the voltage, current, power and forward and reverse energy and Switch input 2 dry contact inputs

so on in the DC system.The actual use of the site, you can measure the EC A second pulse output, a energy pulse output
total power, but also measure the energy within a specified period of time. See the SYS->PLUS display in the meter menu settings.
Pulse output
The test results can be used for local display, but also with industrial For example: The meter displays 100, which is
control equipment, computers to form a measurement and control 100imp/kWH
system. Voltage range AC/DC 85-265V or DC24V(±10%) or DC48V(±10%)
IT
Power
The meter can have infrared communication interface and RS-485 Supply Power
≤ 3W
communication interface, and supports Modbus-RTU protocol and consumption
Power supply // Voltage input // Current input // Relay
DLT645-97 (07) protocol at the same time.The meter can have relay
SA

output and switch input // Communication interface / /

alarm output and digital input function;You can set the ratio, alarm, and
Power frequency
Pulse output 3kV/1minPower supply // Relay output //
communication through the meter panel keys according to different withstand voltage
Voltage input // Current input 3kV/1minPulse output //
requirements.The meter can have event recording of switch (Modbus
Communication interface // Switch input 2kV/1min
protocol), programming and event setting records (645 protocol),
Insulation resistance ≥ 40M Ω
instantaneous and timing freeze function of data (645 protocol),
Average barrier-free
maximum and minimum value recording function of voltage and current ≥50000h
working hours
power.
Normal operating temperature: -25 °C ~ +65 °C;
Environment

Temperature Limit working temperature: -40 °C ~ +70 °C;

Model Description Storage temperature: -40℃～+80℃

Humidity ≤93%RH, no condensation, no corrosive gas

DJSF 1352 - RN / □-□ Altitude ≤2500m

Power Supply: None-AC/DC 85-265V

◆ Pulse constant:
P1-DC 24V,48V
Auxiliary function：
999.9W 10000 imp/kWh
K-Digital input and outputing
/2C-Two way communication(either-or） 9.999kW 1000 imp/kWh

D-Double DC input channels Maximum power 99.99kW 100 imp/kWh

DIN 35mm rail mounted
999.9kW 10 imp/kWh
Registration number
DC meter 9999kW 1 imp/kWh

Maximum power = rated voltage * voltage ratio * current ratio * 1.2

Installation and operation instruction

-01-
Dimension ◆ Three-wire connection
Current shunt connected to the positive

I1+ I1- U1- I2+ I2- U2-

4 5 12 6 7 14
+ +
xxxA/75mV

87.8
93.8
Load xxxA/75mV Load

45
-
-

First DC input channel

Current shunt connected to the negative

48.9
71
I1+ I1- U1- I2+ I2- U2-
4 5 12 6 7 14
72
+ +
- Load - Load

xxxA/75mV xxxA/75mV

Second DC input channel

87.8

EC ◆ Four-wire connection

Current shunt connected to the positive

I1+ I1- U1+U1- I2+ I2- U2+U2-

4 5 11 12 6 7 13 14
71
IT
+ - + -
+ +
xxxA/75mV Load xxxA/75mV Load
-
Wiring -
SA

The meter is designed by standard DIN35mm rail mounted. Current shunt connected to the negative

1 2 17 18 19 24 25 28 34 35 36 37 I1+ I1- U1+U1- I2+ I2- U2+U2-

Fuse 4 5 11 12 6 7 13 14
L(+) L(-) EP+COM TP+ DI1 DI2 COM2 D01 D02 + +
Power Pulse output Switching input Relay output Load Load
- -

xxxA/75mV xxxA/75mV

4 5 11 12 21 22 23

I1+ I1- +12V G -12V U1+ U1-

I1+ I1- U1+ U1- A B COM1
First current input First voltage input RS485 Communication 4 5 51 52 53 11 12
+ - + -

M G +12V -12V +
6 7 13 14 60 61
Hall sensor 1 -

I2+ I2- U2+ U2+ A2 B2

Second current input Second voltage input Second communication
External power
I2+ I2- module U2+ U2-
Note: The second DC input channel and DI and DO functions are
6 7 +12V G -12V 13 14
optional.
+ - + -

When the current input mode is current shunt input: M G +12V -12V +

Hall sensor 2 -

Installation and operation instruction

-02-
 Note: 1. When current shunt is connected to the negative, set the
opption to on in the meter menu, see section 6 menu programming
interface for details.
2. When the two current inputs are input by the Hall current sensor,
the power supply of the second Hall current sensor cannot be used with
the built-in power supply of the meter, and the power module needs to be
externally connected.
3. When the current is input by the shunt, the voltage value
measured by the four-wire method has an error of about one thousandth.
4. It is recommended to use a 0.75mm2 or 1mm2 shielded twisted
pair for the current signal line, and the shield layer needs to be connected
to the ground.

Operation

In the measurement mode, press this key to enter the

programming mode. The meter prompts you to enter the

SET button password PASS. After you enter the correct password, you

can program the instrument; in the programming mode, it

EC
returns to the previous menu

In the measurement mode, it is used to switch the display

item and view the electrical parameters, see the display

IT
键 menu for details;

In the programming mode, it is used to switch the menu of

SA

the same level or reduce the number of ones place.

In the measurement mode, it is used to switch the display

item and view the electrical parameters, see the display

menu for details;

In the programming mode, it is used to switch the menu of

the same level or add the number of ones place.

In the programming mode, it is used to confirm the selection

键 of menu items and modify the parameters.

In the programming mode, this key combination is used to

+ reduce the number of hundreds place.

In the programming mode, this key combination is used to

+ add the number of hundreds place.

-03- Installation and operation instruction