Scribd
Upload
30 views1 page

MPL Lab Assignment

Uploaded by

Satyam Gawali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
30 views1 page

MPL Lab Assignment

Uploaded by

Satyam Gawali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
You are on page 1/ 1

Microprocessor Lab Assignment

1.Write X86/64 ALP to count number of positive and negative numbers from the array

2.Write X86/64 ALP to perform non-overlapped and overlapped block transfer (with and without
string specific instructions). Block containing data can be defined in the data segment.

3.Write X86/64 ALP to convert 4-digit Hex number into its equivalent BCD number and 5-digit
BCD number into its equivalent HEX number. Make your program user friendly to accept the
choice from user for:(a) HEX to BCD b) BCD to HEX (c) EXIT.Display proper strings to prompt
the user while accepting the input and displaying the result. (wherever necessary, use 64-bit
registers)

4.Write X86/64 ALP to perform multiplication of two 8-bit hexadecimal numbers. Use successive
addition and add and shift method. (use of 64-bit registers is expected)

5.Write X86 ALP to find, a) Number of Blank spaces b) Numberof lines c) Occurrence of a
particular character. Accept the data from the text file. The text file has to be accessed during
Program_1 execution and write FAR PROCEDURES in Program_2 for the rest of the processing.
Use of PUBLIC and EXTERN directives is mandatory.

6.Write X86/64 ALP to switch from real mode to protected mode and display the values of GDTR,
LDTR, IDTR, TR and MSW Registers.

7.Write X86 program to sort the list of integers in ascending/descending order. Read the input from
the text file and write the sorted data back to the same text file using bubble sort

8.Write X86 menu driven Assembly Language Program (ALP) to implement OS (DOS) commands
TYPE, COPY and DELETE using file operations. User is supposed to provide command line
argumentsin all cases.

9.Write x86 ALP to find the factorial of a given integer number on a command line by using
recursion. Explicit stack manipulation is expected in the code.

10.Write 80387 ALP to find the roots of the quadratic equation. All the possible cases must be
considered in calculating the roots.

11.Write 80387 ALP to obtain: i) Mean ii) Variance iii) Standard Deviation Also plot the histogram
for the data set. The data elements are available in a text file.

You might also like