Scribd
Upload
25 views

Air Conditioner Troubleshooting Guide

The document provides troubleshooting tips for common air conditioner problems including when it will not start, does not cool properly, runs too often or long, or displays error codes. It lists possible causes and solutions for each problem such as ensuring it is plugged in, the air filter is clean, and there are no obstructions to air flow.

Uploaded by

saddam hosssin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Air Conditioner Troubleshooting Guide

The document provides troubleshooting tips for common air conditioner problems including when it will not start, does not cool properly, runs too often or long, or displays error codes. It lists possible causes and solutions for each problem such as ensuring it is plugged in, the air filter is clean, and there are no obstructions to air flow.

Uploaded by

saddam hosssin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Air Conditioner

Troubleshooting Guide
Air Conditioner Troubleshooting Guide

BEFORE CALLING FOR SERVICE


Your air conditioner is equipped with an automatic error-monitoring system to detect
and diagnose problems at an early stage. If your Air conditioner does not function
properly, or does not function at all, check the following before you call service.

Problem Possible Causes Possible Solutions

OPERATIONS
Will not start • Unit is not plugged in • Make sure electrical plug is plugged into
a live, properly grounded outlet.

• House fuse is blown or • Replace the fuse or reset the breaker.


circuit breaker has
tripped

• Power failure • Wait 3 minutes after power resumes


before starting.

• The integrated circuit • Press the reset button on the unit’s plug .
breaker in the plug has
tripped

• Room temperature is • This is normal.


less than the set
temperature

Does not cool • Air filter is dirty • Clean air filter at least every 2 weeks.
properly
• Not enough time allowed • When first turned on allow for enough
for cooling time to cool the area.

• Cold air is escaping • Close furnace floor registers.

• Cooling coils have iced • Set the controls to high fan or high cool
up and set to a warmer temperature.

• Air flow is restricted • Provide sufficient clearance around the


unit and that the air inlet and outlet are
not blocked by furniture, curtains etc.
Runs too often • Too large of an area for • Consult dealer for the A/C capacity
or too long unit necessary to cool the desired area.

• Doors or windows are • Close doors and windows.


open

Page 1 of 3
Air Conditioner Troubleshooting Guide

BEFORE CALLING FOR SERVICE (Cont.)


Problem Possible Causes Possible Solutions

ERROR CODES
Refer to your Owner’s Manual

Page 2 of 3

You might also like