Scribd
Upload
18 views2 pages

ENSOFT SO-141-30A Ensoft-S: Product Description

Uploaded by

arenkaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views2 pages

ENSOFT SO-141-30A Ensoft-S: Product Description

Uploaded by

arenkaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ENSOFT SO-141-30A

ENSOFT-S

Product Description : This polyolefin based thermoplastic elastomer (SEBS) compound is medium mineral
filled, completely recyclable and suitable for general purpose applications. ENSOFT®
series can be processed with conventional thermoplastics machinery
Additive Packages : T / Heat and UV stabilizer

Key Features : Excellent ozone, UV and weathering resistance


Rubberlike elasticity in a wide temperature range
Easy colorability with proper MB (PE, PP, etc. Based)
Process Method : Injection/multi injection molding

Uses : Industrial applications, automotive, personal care, toys, consumer goods, home&kitchen
appliances
Revision Date : 01.06.2013

Value Unit Standard

Physical

Hardness 30 SHORE A ISO 868 (3 second )


Density 1,1 gr / cm3 ISO 1183 1-A
Brittleness Point -55 °C *
Mechanical

100% Modulus 0,5 Mpa ISO 37, DIN 53504


300% Modulus 1 Mpa ISO 37, DIN 53504
Tensile Strength At Break 4 Mpa ISO 37, DIN 53504
Elongation at Break 800 % ISO 37, DIN 53504
Tear Strength (Perpendicular to flow) 18 kN/m ISO 34-1
Aging

Compression Set (72h/23°C) 10 % ASTM D 395-89-B


Compression Set (22h/70°C) 23 % ASTM D 395-89-B
Thermal

Max. Dynamic Service Temperature 90 °C *


Max. Static Service Temperature 110 °C *

ENPLAST Plastik Kimya San. Tic. A.S ENPLAST Americas, Inc.


Address : Akse Mh. Fevzi Çakmak Cad. No : 130 Address : 616 111th Street, Arlington
Cayirova - Kocaeli 41420 Turkey Texas 76011 - USA
Tel : +90 262 672 10 50 Tel : +1 817 635 47 70
Fax : +90 262 672 10 51
Mail : [email protected] www.enplast.com.tr
ENSOFT SO-141-30A
ENSOFT-S

Environmental Resistance
Ozone Excellent
Water Excellent
Alcohol Excellent
Olive Oil Fair
Sulphuric Acid Good
Detergent Good
Drying Condition
Drying Time(hr) Not required
Drying Temperature(°C) Not required
Molding Condition (°C)
1st Zone (hopper)(°C) 150-160
2nd Zone(°C) 160-170
3rd Zone(°C) 170-180
Nozzle(°C) 185-190
Melt Temperature(°C) 190-200
Mold Temperature(°C) 10-50
Max Allowable Melt Temperature(°C) 250 C

Important Notice;
The above results are obtained from the tests conducted in Enplast laboratories on injection molded ISO samples and cannot be used directly to
determine end-use or design specification. Datasheet values represent a statistical average of product properties and they may be subject to change as
new information becomes available. Customers and other users should make their own independent determination that the product is suitable for the
intended use. ENPLAST accepts no responsibility for results obtained by the application of this information and disclaims all warranties that might arise
in connection with this information.

ENPLAST Plastik Kimya San. Tic. A.S ENPLAST Americas, Inc.


Address : Akse Mh. Fevzi Çakmak Cad. No : 130 Address : 616 111th Street, Arlington
Cayirova - Kocaeli 41420 Turkey Texas 76011 - USA
Tel : +90 262 672 10 50 Tel : +1 817 635 47 70
Fax : +90 262 672 10 51
Mail : [email protected] www.enplast.com.tr

You might also like