0% found this document useful (0 votes)
10 views

DSEG8600 Data Sheet

Uploaded by

Rahul Kothiyal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
10 views

DSEG8600 Data Sheet

Uploaded by

Rahul Kothiyal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

DSEG8600

Parallel Genset Controller with Integral Heater


Part Number: G8600-01

Description
The G8600 is a parallel genset controller with integral heater designed for complex paralleling applications. The G8600 can be configured to provide
paralleling for up to 4,032 generators on a single site and provides a wide range of high-end features for multiple application environments. The module
is configurable for use as a single-set controller, multi-set controller, mains (utility) controller or group controller.

Key Features Features Key Applications


• Multiple bus sectioning • Built-in governor & AVR control
• Group controller functionality • DSE digital AVR support
• Spinning reserve • Base load (kW export) control
• Load demand schemes • Positive & negative kVAr export control
• Advanced MSC link (AMSC) • Dead bus synchronising
• Advanced PLC functionality • Mains (utility) decoupling protection Hospitals Industrial
• Multi-purpose PIDs • Multiple language support
• Phase locking • 3-phase generator sensing & protection
• Virtual inputs • 3-phase mains (utility) sensing
• On-screen mimic (SLDs) • 3-phase bus sensing
• Multiple application support • Mains (utility) failure detection
• Multi-level pin protected front panel editor • Generator current, protection & power monitoring
• Integral LCD display heater • Configurable timers Data Centers Rental
• Enhanced high-resolution 240 x 128 pixel display • Integrated SNMP
• Single or multiple generator control • Data logging
• Latest ECU / ECM support • PC configuration
• Load sharing & VAr sharing • DSENet® (Expansion support)
• Virtual shared inputs, outputs and data via AMSC • Flexible I/O (inputs/outputs)
• Touch screen panel PC support (DSE SCADA) • Automatic and front panel breaker control Telecoms Hybrid
• Zero sequence voltage protection • Power-save mode
• Integral gasket (IP65 protection)

Product Documentation
Title Part No.
DSEG8600 Installation Instructions 053-256
DSEG8600 Operator Manual 057-323
DSEG8600 Configuration Suite PC Manual 057-322

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater

Specifications

DC Supply

Continuous Voltage Rating 8 V to 35 V DC continuous

Cranking Dropouts Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs
and backlight will not be maintained during cranking.

Maximum Operating Current 700 mA at 12 V, 350 mA at 24 V

Maximum Standby Current 350 mA at 12 V, 190 mA at 24 V

Charge Fail Excitation Range 0 V to 35 V

Real Time Clock Battery Not replaceable

Voltage Measurement

Measurement Inputs 3 ph + N

Measurement Range 15 V to 415 V (L-N) / 25 V - 719 V (Ph-Ph)

Accuracy 1% full scale

Frequency Range 3.5 Hz to 75 Hz

Input Impedance 450 K L-L

Current Measurement

Measurement Inputs 3-phase & neutral

Measurement Range 0-1 A, 0-5 A

Max Allowed Continuous Current 5A

Accuracy 1% full scale

Input Impedance 0.02 R

Inputs

Analogue 4 sender inputs configurable 1 x 0-3 K, 3 x 0-5 K

Digital (Flexible) 3 configurable, active low / active high, 0-3 K resistance, 0-10 V, 0-32 V, 0-20 mA

Digital 9 active low digital outputs

Type Standard senders with floating common, digital flex use system ground with separate
return terminal

Resolution 1 R, 0.1 V, 0.1 mA

Accuracy 1% full range

Outputs

Analogue Governor / AVR configurable ±10 V, ±20 mA

Digital Fuel / crank protected FET output 15 A

Auxiliary 8 protected FET @ 2 A

Switching To Plant supply

Volt-Free Contact 2 volt-free contacts (C & D) 8 A at 250 V AC

AVR Governor Control

Minimum Load Impedance Voltage mode minimum = 500 R, Current mode max = 500 R

Gain Voltage 0-10 V, 0-20 mA configurable

Offset Voltage 0-10 V, 0-20 mA configurable

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater

Specifications

Magnetic Pick-Up

Voltage Input Range 0.5 V to 70 V RMS

Frequency Input Range 1 Hz to 10 KHz

Frequency Measurement Tolerance Better than 0.1%

Communications

RS485 Fully isolated x 2

Ethernet 10/100 Ethernet Port

USB A 1 x storage device

USB B 1 x non isolated host / programming

CAN Fully isolated x 3

Temperature

Operating Temperature -30° C to +70 ° C / -22° F to +158 ° F

Storage Temperature -40° C to +85 ° C / -40° F to +185 ° F

Dimensions

Overall (W x H x D) 248 mm x 182.6 mm x 45.2 mm / 9.77” x 7.19” x 1.78”

Panel Cut-Out (W x H) 220 mm x 160 mm / 8.66” x 6.3”

Maximum Panel Thickness 8 mm / 0.31”

Related Products

Controllers

G8660 ATS / Mains (Utility) Controller G8660-01

G8680 Bus Tie Controller G8680-01

G8900 7” Colour Parallel Genset Controller G8900-01

Remote Displays

G8015 15” Panel PC with DSE SCADA G8015-01

G8021 21” Panel PC with DSE SCADA G8021-01

Expansion Devices

G0123 Analogue Load Share Lines Interface G0123-01

DSE2130 DSENet® Input Expansion Module 2130-01

DSE2131 DSENet® Ratiometric Input Expansion Module 2131-01

DSE2133 DSENet® RTD/Thermocouple Input Expansion Module 2133-01

DSE2152 DSENet® Analogue Output Expansion Module 2152-01

DSE2157 DSENet® Output Expansion Module 2157-01

DSE2160 Bi-Directional DSENet® Expansion Module 2160-01

DSE2170 Thermocouple DSENet® Expansion Module 2170-01

DSE2548 DSENet® LED Output Expansion Module 2548-01

Remote Communications

DSE890 MKII DSEWebNet® Gateway 0890-04

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater

Environmental Testing Standards

Electro-Magnetic Compatibility

BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment

BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment

Electrical Safety

BS EN 61010 Safety of Information Technology Equipment, including Electrical Business Equipment

Temperature

BS EN 60068-2-1 Ab/Ae Cold Test -30 ºC

BS EN 60068-2-2 Bb/Be Dry Heat +70 ºC

Vibration

BS EN 60068-2-6 Ten sweeps in each of three major axes


5 Hz to 8 Hz at +/-7.5 mm,
8 Hz to 500 Hz at 2 gn

Humidity

BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 ºC at 95% RH 48 Hours

BS EN 60068-2-78 Cab Damp Heat Static 40 ºC at 93% RH 48 Hours

Shock

BS EN 60068-2-27 Three shocks in each of three major axes


15 gn in 11 mS

Degrees of Protection Provided by Enclosures

BS EN 60529 IP65 - Front of module when installed into the control panel (Integrated Gasket)

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater
Typical Applications

Single-Set (to mains/utility) Multi-Set

Multi-Set

Multi-Set

Single-Set

Mains (Utility) Controller

Multi-Set

Multi-Set

Mains Controller
Multi-Set

Group Controller

Mains
Controller

Group Multi-Set Multi-Set Group


Controller Controller

Multi-Set Multi-Set

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater
Technical Drawing

220 mm
( 8.66 " )

45.2 mm
( 1.78 " )
248 mm 32.3 mm
( 9.77 " ) ( 1.27 " )
182.6 mm
( 7.19 " )

( 6.30 " )
160 mm

Connection Diagram

DC Supply : 8 V to 35 V, 1 A max
DC Outputs : 24 V, 15 A (T4 to T5); 2 A (T7 to T14)
DC Inputs : 30 V max
Volt-free Outputs : 250 V AC, 8 A
AC Voltage inputs : 600 V AC, 50 Hz / 60 Hz, 1 phase to 3 phase
AC Current inputs : 5 A, 50 Hz / 60 Hz, 1 phase to 3 phase
Charge Alternator : 30 V DC, 2.5 W max
Magnetic Pickup : 70 V peak, 10 kHz max
76 75 74 73 72 71

Analog Inputs : 11 V DC max (T16 to T19); 32 V DC max (T68 to T70)


Comms Port : 5 V DC max
Governor / AVR : ±10 V DC

Made in UK
020-1083-01,4

Refer to PIN out description charts for connection information on the operating mode controller is configured for.

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater
PIN Out Description

Single-Set Controller Multi-Set Controller


PIN DESCRIPTION PIN DESCRIPTION
1 to 2 DC Supply 1 to 2 DC Supply
3 Emergency Stop 3 Emergency Stop
4 Fuel 4 Fuel
5 Start 5 Start
6 Charge Alternator 6 Charge Alternator
7 to 14 Digital Outputs 7 to 14 Digital Outputs
15 to 19 Analogue Inputs 15 to 19 Analogue Inputs
20 to 22 Not Applicable 20 to 22 Redundant AMSC Link
23 to 25 Magnetic Pick-Up 23 to 25 Magnetic Pick-Up
26 to 28 Engine ECU/ECM 26 to 28 Engine ECU/ECM
29 to 31 DSENet® 29 to 31 DSENet®
32 to 34 Not Applicable 32 to 34 AMSC Link
35 to 36 Governor Control 35 to 36 Governor Control
37 Not Applicable 37 Not Applicable
38 to 39 AVR Control 38 to 39 AVR Control
40 to 41 Normally Closed Volt Free Output 40 to 41 Normally Closed Volt Free Output
42 to 43 Normally Open Volt Free Output 42 to 43 Normally Open Volt Free Output
44 to 47 Generator Voltage Sensing 44 to 47 Generator Voltage Sensing
48 to 51 Mains (Utility) Voltage Sensing 48 to 51 Bus Voltage Sensing
52 to 56 Generator Current Sensing 52 to 56 Generator Current Sensing
57 to 58 Mains (Utility) Current Sensing 57 to 58 Not Applicable
59 to 67 Digital Inputs 59 to 67 Digital Inputs
68 to 70 & 77 Analogue Inputs 68 to 70 & 77 Analogue Inputs
71 to 76 2 x RS485 71 to 76 2 x RS485

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)
DSEG8600
Parallel Genset Controller with Integral Heater
PIN Out Description

Mains (Utility) Controller Group Controller


PIN DESCRIPTION PIN DESCRIPTION
1 to 2 DC Supply 1 to 2 DC Supply
3 Not Applicable 3 Not Applicable
4 to 5 Not Applicable 4 to 5 Not Applicable
6 Not Applicable 6 Not Applicable
7 to 12 Digital Outputs 7 to 12 Digital Outputs
13 to 14 Not Applicable 13 to 14 Not Applicable
15 to 19 Not Applicable 15 to 19 Not Applicable
20 to 22 Redundant AMSC Link 20 to 22 Redundant AMSC Link
23 to 25 Not Applicable 23 to 25 Not Applicable
26 to 28 Not Applicable 26 to 28 Primary AMSC
29 to 31 DSENet® 29 to 31 DSENet®
32 to 34 AMSC Link 32 to 34 Secondary AMSC Link
35 to 36 Not Applicable 35 to 36 Not Applicable
37 Not Applicable 37 Not Applicable
38 to 39 Not Applicable 38 to 39 Not Applicable
40 to 41 Normally Closed Volt Free Output 40 to 41 Normally Closed Volt Free Output
42 to 43 Normally Open Volt Free Output 42 to 43 Normally Open Volt Free Output
44 to 47 Mains (Utility) Voltage Sensing 44 to 47 Primary Voltage Sensing
48 to 51 Bus Voltage Sensing 48 to 51 Secondary Voltage Sensing
52 to 56 Mains (Utility) Current Sensing 52 to 56 Current Sensing
57 to 58 Bus Current Sensing 57 to 58 Not Applicable
59 to 67 Digital Inputs 59 to 67 Digital Inputs
68 to 70 & 77 Not Applicable 68 to 70 & 77 Not Applicable
71 to 76 2 x RS485 71 to 76 2 x RS485

DEEP SEA ELECTRONICS UK DEEP SEA ELECTRONICS USA DEEP SEA ELECTRONICS UAE DEEP SEA ELECTRONICS INDIA
T: +44 (0) 1723 890099 T: +1 (815) 316 8706 T: +971 (0) 45910819 T: +91 20 68195900
E: [email protected] E: [email protected] E: [email protected] E: [email protected]
W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com W: www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-282/04/23 (2)

You might also like