PC Sel Guide
PC Sel Guide
PANEL CONTROLS
INDUSTRIAL APPLICATIONS
Ca
rb
on
Fil
m
•
Wi
rew
ou
nd
•
Ce
rm
et
•
Lo
ng
Lif
eC
arb
on
Fil
m
•
At
ten
ua
tor
s
SELECTION GUIDE
www.tocos.com
TOCOS
®
Selection Guide PA N E L C O N T R O L S
Model Examples
Resistance Tolerance 20% Standard (10% Special Order ) 10% Standard 20% Standard (10% Special Order )
Power Rating 0.25W at 40C 0.25W at 40C 0.5W at 40C
0W at 85C 0W at 85C 0W at 85C
Adjustment Travel 27010 27010 27010
Temperature Range 10C to 85C 10C to 85C 10C to 85C
Rotational Life 10,000 Cycles 10,000 Cycles 15,000 Cycles
Construction Plastic Bushing, Metal Shaft Plastic Bushing, Metal Shaft Metal Bushing, Metal Shaft
Nominal Body Size 10mm Diameter 10mm Diameter 12.8mm Diameter
Bushing Type M6 (P0.75), 6.5mml M6 (P0.75), 3.5mml 1/4”-32UNEF-2A, 6.35mml
Shaft Dimensions Ø 3mm10 or 15mml (FMS)** Ø 3mm10 or 15mml (FMS)** Ø 3.2mm10 or 15mml (FMS)**
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Lug or PCB Pins Lug or PCB Pins Lug or PCB Pins
Configurations Single Unit, Single Shaft Single Unit, Single Shaft Single Unit, Single Shaft
Other Features Molded Plastic Housing and Bushing Optional Center Detent Models Metal Housing
Small Size, Lightweight Molded Plastic Housing and Bushing Anti-rotational Adapter Plate
Model Examples
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S) or Flat (F )
Terminal Styles Ear-Lug, Rear Switch Lug or PCB Pins Rear Exit Lug or PCB Pins Right Angle Ear-Lug
Configurations Single or Tandem Unit, Single Shaft Single Unit, Single Shaft Single Unit, Single Shaft
Dual Unit, Dual Concentric Shaft
Other Features Switch Functions, Shaft Lock and Shaft Lock Models Available Meets UL 94HB Flammability Test
Center Detent Available
* Length for Shaft Lock Models Only ** FMS = From Mounting Surface
Selection Guide PA N E L C O N T R O L S
Model Examples
Shaft End Styles Full Knurled Shaft with Blade Slot Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Right Angle Ear-Lug Right Angle Ear-Lug or PCB Pins Ear-Lug, Rear Exit Switch Lug
Configurations Single Unit, Single Shaft Single Unit, Single Shaft Single, Tandem or Triple Unit, 1 Shaft
Dual Unit, Dual Concentric Shaft
Other Features Fingertip or Blade Adjustment 2-Pin Rear Support Bracket for Switch Functions, Shaft Lock and
Meets UL 94HB Flammability Test PCB Pin Models Center Tap Available
Model Examples
ONTIN
W = 2W (B), 1.0W (A,C) at 70C Range and Taper ), 0W at 85C
Adjustment Travel
Temperature Range
DISC
3005
10C up to 85C ( Y ) or 120C ( W )
28010
10C to 85C
2905
10C ( Y ) or 30C ( X ) up to 100C
Rotational Life 15,000 Cycles, Shaft Lock 500 Cycles 15,000 Cycles, Shaft Lock 500 Cycles 15,000 Cycles, Shaft Lock 500 Cycles
Construction Metal Bushing, Metal Shaft Metal Bushing, Metal Shaft Metal Bushing, Metal Shaft
Nominal Body Size 28mm Diameter 30mm Diameter 16.5 W17.8H (mm)
Bushing Type 3/8”-32UNEF-2A, 9.5 or 12.7*mml M9 (P0.75), 10 or 12.7*mml M5 (P0.5), 5 or 7.8*mml
Shaft Dimensions Ø 6mm15 or 20mml (FMS)** Ø 6mm15 or 20mml (FMS)** Ø 3mm10 or 15mml (FMS)**
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Right Angle Ear-Lug Ear-Lug, Rear Exit Switch Lug Right Angle Ear-Lug or PCB Pins
Configurations Single or Tandem Unit, Single Shaft Single, Tandem or Triple Unit, 1 Shaft Single Unit, Single Shaft
Dual Unit, Dual Concentric Shaft
Other Features Shaft Lock Available Switch Functions and Shaft Lock Shaft Lock Available, 2-Pin Rear
High Power Rating Available Support Bracket for PCB Models
* Length for Shaft Lock Models Only ** FMS = From Mounting Surface
Selection Guide PA N E L C O N T R O L S
Model Examples
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Right Angle Ear-Lug or PCB Pins Right Angle Ear-Lug Right Angle Ear-Lug
Configurations Single or Tandem Unit, Single Shaft Single or Tandem Unit, Single Shaft Single Unit, Single Shaft
Dual Unit, Dual Concentric Shaft
Other Features Shaft Lock Available, 2-Pin Rear Shaft Lock Available, Special Model High Linearity, 0.5% max.
Support Bracket for PCB Models with Push-To-Turn Knurled Shaft High Torque
Model Examples
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Ear-Lug, Rear Exit Switch Lug Ear-Lug, Rear Exit Switch Lug Rear Exit Wirewrap Terminals
Configurations Single, Tandem or Triple Unit, 1 Shaft Single or Tandem Unit, Single Shaft Single Unit, Single Shaft
Dual Unit, Dual Concentric Shaft
Other Features Switch Functions, Shaft Lock and Switch Functions and Shaft Lock One Piece Aluminum Housing and
Center Tap Available Available, High Power Rating Bushing, High Power Rating
* Length for Shaft Lock Models Only ** FMS = From Mounting Surface
Selection Guide PA N E L C O N T R O L S
Model Examples
Resistance Tolerance 20% Standard (10% Special Order ) 10% Standard 10% Standard
Power Rating 0.5W at 70C 1.0W at 70C 2.0W at 70C
0W at 120C 0W at 120C 0W at 120C
Adjustment Travel 26010 26010 29510
Temperature Range 55C to 125C 10C to 125C 10C to 120C
Rotational Life 15,000 Cycles, Shaft Lock 500 Cycles 15,000 Cycles, Shaft Lock 500 Cycles 15,000 Cycles, Shaft Lock 500 Cycles
Construction Metal Bushing, Metal Shaft Metal Bushing, Metal Shaft Metal Bushing, Metal Shaft
Nominal Body Size 16.5 W17.5H (mm) 20mm Diameter 28mm Diameter
Bushing Type M6 (P0.75), 6 or 7.5*mml M9 (P0.75), 6 or 10*mml M9 (P0.75), 9.5 or 12.7*mml
Shaft Dimensions Ø 3.2mm10 or 15mml (FMS)** Ø 6mm15 or 20mml (FMS)** Ø 6mm15 or 20mml (FMS)**
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Right Angle Ear-Lug or PCB Pins Rear Exit Straight Lug or PCB Pins Right Angle Ear-Lug
Configurations Single Unit, Single Shaft Single Unit, Single Shaft Single or Tandem Unit, Single Shaft
GFV281 6-Turn (Special Order )
Other Features Shaft Lock Available Shaft Lock Available Shaft Lock Available, High Power
Excellent Environmental Characteristics Excellent Environmental Characteristics Excellent Environmental Characteristics
Model Examples
Shaft End Styles Slot (S), Flat (F ), Round (R) or Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Slotted and Knurled (SK )
Terminal Styles Right Angle PCB Pins Rear Exit Lug (PCB Pins Special Order ) Rear Exit Lug (PCB Pins Special Order )
Configurations Single Unit, Single Shaft Single Unit, Single Shaft Single Unit, Single Shaft
Other Features Contact TOCOS for Bushing and Shaft One Piece Molded Plastic Housing Lightweight Plastic Housing
Options and Vertical Mount Models. and Bushing, Lightweight PCB Pin Style Available (Special Order )
* Length for Shaft Lock Models Only ** FMS = From Mounting Surface
Selection Guide PA N E L C O N T R O L S
Model Examples
Shaft End Styles Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R) Slot (S) or Flat (F )
Terminal Styles Rear Exit Lug (PCB Pins Special Order ) Right Angle Ear-Lug Right Angle Ear-Lug
Configurations Single Unit, Single Shaft Single Unit, Single Shaft Single Unit, Single Shaft
Other Features Zinc Alloy Housing and Bushing Suitable for Automotive Applications Independent Linearity 5% max.
PCB Pin Style Available (Special Order ) High Torque Available (Special Order )
Model Examples
Shaft End Styles Slot (S) or Flat (F ) Slot (S), Flat (F ) or Round (R) Slot (S), Flat (F ) or Round (R)
Terminal Styles Right Angle Ear-Lug Right Angle Ear-Lug Right Angle Ear-Lug
Configurations Single Unit, Single Shaft Single Unit, Single Shaft Single Unit, Single Shaft
Other Features Independent Linearity 5% max. Independent Linearity 3% max. Independent Linearity 3% max.
Continuous Rotation (Special Order ) Continuous Rotation (Special Order )
* Length for Shaft Lock Models Only ** FMS = From Mounting Surface
Selection Guide A T T E N U A T O R S
Attenuator Series Through-Hole AT10 Series Through-Hole AT16 Series Panel Mount AT28 Series
Model Examples
NUED
Adjustment Travel 14010 14010 15010
TI
ISCON
Temperature Range 55C to 100C 55C to 125C 55C to 125C
Rotational Life 50 Cycles 1,500 Cycles 500D
Cycles
Construction Sealed Plastic Housing ( Washable) Sealed Plastic Housing ( Washable) Metal Bushing, Metal Shaft
Nominal Body Size 11mm Square 16.6mm Square 28mm Diameter
Bushing Type Not Applicable Not Applicable M9 (P0.75), 9.5mml
Shaft Dimensions Ø 4.6mm13 or 23mml (PK ) Not Applicable Ø 6mm20mml (FMS)**
Shaft End Styles 7mml Knurled, Slotted End Style (PK ) Not Applicable Slot (S), Flat (F ) or Round (R)
Terminal Styles 3-Pin Triangular PCB Patterns 3-Pin and 5-Pin PCB Patterns Right Angle Ear-Lug
Adjustment Type Top or Side Adjust Top or Side Adjust Panel Adjust
Configurations Through-Hole, Single-Slot, No Shaft, Through-Hole, Single-Slot, Rotor Flush Single Unit, Single Shaft
Rotor Flush with Housing with Housing
Through-Hole, Plastic Shaft with Through-Hole, Single-Slot, Rotor Flush
Knurled, Slotted End Style with Housing, 2-Pin Support Bracket
Other Features Fingertip or Blade Adjustment Blade Adjustment High Power Rating
Meets UL 94V-0 Flammability Test Meets UL 94V-0 Flammability Test Meets UL 94HB Flammability Test
* Length for Shaft Lock Models Only ** FMS = From Mounting Surface
Series Name Size Style Nominal Attenuation Shaft Length Nominal Impedance
Series Name Feature Size Temperature Range Style Switch Shaft Length Shaft End Style Taper Resistance Code Resistance Tolerance
RV = Carbon Film Unit: mm See List of S = Blade Slot Expressed in ohms. M = 20%
RA = Wirewound Part Numbers F = Flat A three digit code: K = 10%
GF = Cermet on back page R = Round the first two digits J = 5%
for Standard H = Deep Slot are significant G = 2%
T= Center Tap Style Codes. SK = Slotted figures, the third F = 1%
Q= Long Life and Knurled digit indicates the
B= Low Torque SE = SPST, 1A number of zeros.
V= 6-Turn SF = SPST, 3A Length is measured ( i.e.,103 = 10,000Ω)
Y = 10C to 85C ME = SPDT, 1A From Mounting Surface
X = 30C to 100C MF = SPDT, 3A (FMS) for Single Shaft B = Linear
W = 10C to 120C SH = SPST, 0.5A or Inner Shaft of Dual A = CW Audio (log)
MH = SPDT, 0.5A Concentric Shafts. C = CCW Audio (log)
Y 10C to 85C Operating G Ganged Tandem, 2 Units, 1 Shaft RVQLong Life, Carbon Series TP 9mm PCB Mount, Side Adjust,
Temperature Range GL Ganged Tandem, 2 Units, RVTCenter Tap, Carbon Series 300,000 Cycle Rotational Life
X 30C to 100C Operating 1 Locking Shaft RATCenter Tap, Wirewound Series RH 9mm PCB Mount, Top Adjust,
Temperature Range D Dual Unit, Dual Concentric GFV6-Turn Cermet Model 300,000 Cycle Rotational Life
W 10C to 120C Operating Shaft (2 Units, 2 Shafts) NC Continuous Rotation, TPQ 9mm PCB Mount, Side Adjust,
Temperature Range T Triple, 3 Units, 1 Shaft Long Life Carbon Series 100,000 Cycle Rotational Life
N Panel Mount, 1 Unit, 1 Shaft S Panel Seal Mount SE Switch, SPST, 1A RHQ 9mm PCB Mount, Top Adjust,
P PCB Mount (P1, P2, P3, P5 have HT High Torque SF Switch, SPST, 3A 100,000 Cycle Rotational Life
varied pin-out styles) RVB Low Torque, Carbon Series ME Switch, SPDT, 1A
-4C Center Detent PB PCB Mount, 4-Pin Mounting MF Switch, SPDT, 3A Attenuators
L Locking Shaft Bracket (P-4CB with Detent) SH Switch, SPST, 0.5A AT10P, AT10S, AT16 and AT162 have
PL PCB Mount, Locking Shaft PR Push-To-Turn Knurled Shaft MH Switch, SPDT, 0.5A rotor flush with housing, no shaft.
Visit our web site at www.tocos.com for drawings and additional product information.
Affiliated With
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173 ©2001 Tocos America, Inc.
Tel: 847-884-6664 Fax: 847-884-6665 All Rights Reserved
E-mail: [email protected] www.tocos.com Printed in USA March 2002