Page 1 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

Sample Photo

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 2 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

TEST REPORT
OVERALL RATING
DATA
CUSTOMER PROVIDED INFORMATION
APPLICANT : DEEP CLOTHING CO.
CONTACT PERSON : BANINDER PAL SINGH
ADDRESS : K-128/129, PHASE-8, FOCAL POINT, LUDHIANA, PUNJAB,
INDIA-141010
SAMPLE DESCRIPTION : WOVEN FABRIC (LINING)
(ORDER QUANTITY-100)
BUYER NAME : COCOBLU
BUYING HOUSE : -
BRAND : SYMBOL
FIBER CONTENT : -
STYLE NO. : AW21SYMBJKWC01
COLOR NAME : RED
PO NO. : -
FABRIC CATEGORY :  NEW FABRIC DEVELOPMENT
 STOCK FABRIC
 PROGRAMMED BASE FABRIC
 PROGRAMMED BULK FABRIC
COUNT : -
CONSTRUCTION : -
FABRIC CODE : -
PRODUCT CODE (BLUEKAKTUS) : -
CATEGORY CODE (BLUEKAKTUS) : -
SEASON : W23
END USE : GARMENT
COUNTRY OF ORIGIN : INDIA
COUNTRY OF DESTINATION : -
PACKAGE : MAIN PACKAGE TEST (WOVEN - FPT)
GSM : -
APPLICANT’S PROVIDED CARE : DRY CLEAN ONLY
INSTRUCTION / LABEL

LABORATORY PROVIDED INFORMATION

SAMPLE RECEIVING DATE : 10-OCT-2023
TESTING PERIOD : 10-OCT-2023 TO 16-OCT-2023
DELIVERY CONDITION : SAMPLE RECEIVED IN GOOD CONDITION
SAMPLE NOT DRAWN BY EUROFINS PRODUCT TESTING INDIA PVT. LTD.

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 3 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

FOR AND ON BEHALF OF

EUROFINS PRODUCT TESTING INDIA PVT. LTD.

RAHUL SHARMA
LAB-MANAGER
Results obtained refer only to samples, products or material received in Laboratory, as described in point related to sample description, and tested in conditions shown in present report. Eurofins Products
Testing Pvt. Ltd. Ensures that this job has been performed according to our Quality System and complying contract and legal conditions. If you happen to have any comments, please do it by sending
email to [email protected] and referring to this report number. Reproduction of this document is only valid if it is done completely and under the written permission Eurofins Products
Testing Pvt. Ltd.

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 4 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

Conclusion:

Test Property Pass Fail Remarks

DETERMINATION OF FIBER CONTENT REFER RESULT
TEAR STRENGTH X
FABRIC PROPENSITY TO SURFACE FUZZING AND
X
PILLING: PILLING BOX METHOD
COLOUR FASTNESS TO RUBBING X
THREAD COUNT (END & PICKS) REFER RESULT
RESISTANCE TO SLIPPAGE OF YARNS IN FABRICS X
COLOUR FASTNESS TO DRYCLEANING X
COUNT REFER RESULT
DIMENSIONAL STABILITY TO DRY CLEANING X
APPEARANCE AFTER DRY CLEANING X

Remark:
1. Testing has been performed as per applicant request.
2. Statement of conformity provided based on the client provided requirement and exclude Measurement Uncertainty Decision rule as
vendor has not demanded the same through test request form, we received.
3. € represents non-Accredited parameters.
4. $ represents subcontracted parameters.

Note:
If there is question or concern regarding the above results, please contact the appropriate lab person below:

Rahul Sharma
[email protected]

The testing lab overall rating is provided to client as an aid in reviewing report data. The rating is based on lab results. Final product acceptance or rejection is per client only. Testing of
vendor’s merchandise by client is not a substitute for vendor’s own testing and other quality assurance related obligations in connection with its sale of merchandise to client. Client testing shall
not limit client’s rights or diminish or remove any of vendor’s responsibilities.

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 5 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

Component List

Component No. Component Material Color Remark

A WOVEN FABRIC TEXTILE RED -

DETERMINATION OF FIBER CONTENT

AATCC 20:2013/20A:2018
Result
Test Parameters Requirement:
(A)
LAB ANALYSIS 100% POLYESTER
-
RECOMMENDED FIBER CONTENT 100% POLYESTER
Note: - Final garment/product review is pending

TEAR STRENGTH
ASTM D1424:09 (2019)
Result
Test Parameters Unit Requirement:
(A)
ACROSS WARP: lbs 2.34 lbs Min. 1.5 lbs
ACROSS WEFT: lbs 3.69 lbs Min. 1.5 lbs

FABRIC PROPENSITY TO SURFACE FUZZING AND PILLING: PILLING BOX METHOD

ISO 12945-1:2020 (10800 Rev)
Result
Test Parameters Requirement:
(A)
PILLING 4-5
FUZZING 4-5 Min. Grade 3-4
MATTING 4-5

PILLING
GRADE DESCRIPTION
5 No Change
4 Slight Surface fuzzing and /or partially formed pills.
3 Moderate surface fuzzing and /or Moderate pilling. Pills of varying size and density partially covering
the specimen surface
2 Distinct Surface fuzzing and/or Distinct pilling. Pills of varying size and density covering a large
proportion of the specimen surface
1 Dense surface fuzzing and/or Severe pilling. Pills of varying size and density covering the whole of the
specimen surface

COLOUR FASTNESS TO RUBBING

ISO 105-X12:2016
Result
Test Parameters Requirement:
(A)
STAINING ON DRY 4-5 Min. Grade 3-4
STAINING ON WET 4-5 Min. Grade 2-3

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 6 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

THREAD COUNT (END & PICKS)

ISO 7211-2:1984
Result
Test Parameters Unit Requirement:
(A)
WARP yarns/in 104 -
WEFT yarns/in 73 -

RESISTANCE TO SLIPPAGE OF YARNS IN FABRICS

ASTM D 434:1995
Result
Test Parameters Unit Requirement:
(A)
WARP WAY SEAM lbs 20.1 Min. 17 lbs
WEFT WAY SEAM lbs 53.2# Min. 17 lbs
#The seam was less than 6 mm opening required though the ultimate seam strength was found and stated.

COLOUR FASTNESS TO DRYCLEANING

ISO 105-D01:2010
Solvent: Perchloethylene
Result
Test Parameters Requirement:
(A)
CHANGE IN COLOUR 4 Min. Grade 4
STAINING ON ACETATE 4 Min. Grade 3-4
STAINING ON COTTON 4 Min. Grade 3-4
STAINING ON NYLON 4 Min. Grade 3-4
STAINING ON POLYESTER 4 Min. Grade 3-4
STAINING ON ACRYLIC 4-5 Min. Grade 3-4
STAINING ON WOOL 4-5 Min. Grade 3-4
SELF STAINING -

COLOURFASTNESS RATING
Class 5 Negligible / No change or staining
Class 4 Slight change or staining
Class 3 Moderate change or staining
Class 2 Distinct change or staining
Class 1 Severe change or staining

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 7 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023

COUNT - €
INHOUSE TEST METHOD
Result
Test Parameters Requirement:
(A)
WARP 55.8 D -
WEFT 105.2 D -
D: Denier Count

DIMENSIONAL STABILITY TO DRY CLEANING - €

COMMERCIAL DRYCLEAN
Result
Test Parameters Requirement:
(A)
WARP -0.5%
+ 1% / - 2 %
WEFT -0.5%

APPEARANCE AFTER DRY CLEAN - €

COMMERCIAL DRYCLEAN
Sample Result Requirement
After 1st Cycle:
Color Change:
Min. Grade 4
Self-staining:
- Slight color change is observed in base. (Rating 4)
Min. Grade 4-5
- No noticeable pilling or fuzzing of surface fibers is observed. (Rating 4-5)
Pilling: Min.
- No fraying of thread is observed from surface of base.
Grade 3-4
(A) No Significant
change
Multifiber Staining
Acetate 4 Polyester 4
Min. Grade 3-4
Cotton 4 Acrylic 4-5
Nylon 4 Wool 4-5
The General Appearance of Dry-clean sample found to be satisfactory

*****End of Report*****

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300
 Page 8 of 8

Report Code AR-23-XW-020438-01

Sample No EFXW23100553-CG-01
Report Date 16-Oct-2023
General Terms & Conditions of Sale
1. Area of Application
1.1 All Orders accepted by “Eurofins Product Testing India Pvt. Ltd” or any of its subsidiaries or affiliates” (collectively, “ES”) will be governed by these General Terms and Conditions of Sales (the “Terms and Conditions”), including orders placed by telephone which have not
been confirmed in writing and orders made by delivery of samples. A contract with these Terms and Conditions comes into being when an order that has been placed with ES is accepted by ES. An order placed with ES is considered as accepted by ES when (a) ES proceeds to
fulfil that order, without need for any written confirmation from ES or (b) ES accepts the order in writing.
1.2 These Terms and Conditions supersede and replace all prior verbal or written price quotations and agreements between the parties and, unless specifically indicated otherwise therein, take precedence over all conflicting or inconsistent provisions of subsequent written
agreements between the parties. No officer (other than the Chief Executive Officer of ES), employee, agent or subcontractor of ES has the authority to alter or waive any of these Terms and Conditions or to make any representation which conflicts with or purports to override
any of these Terms and Conditions; and no such alteration, waiver or representation shall be binding upon ES, unless it is in writing and signed by the Chief Executive Officer of ES.
2. Placement of Order
2.1 A customer's order will be valid only if it is sent by mail or fax or other electronic message on letterhead of the customer or by using ES-approved sample Test request form or electronic order forms and the commercial aspects of the order which are not specifically set
out in these Terms and Conditions (including price, estimated turnaround times and delivery date) must be agreed at the time of the order. The customer must confirm in writing orders given by telephone immediately after they are made and will be deemed to have placed
an order if the customer sends samples to ES quoting the customer reference. ES is not obligated to start any work unless the order is clear and it has been provided all required information.
2.2 Unless specifically accepted in writing and signed by the Chief Executive Officer of ES, any terms proposed or submitted by a customer at any time (including, but not limited to, terms or provisions in the customer’s purchase order, instructions or other document) which
differ from these Terms and Conditions are rejected as a material alteration of these Terms and Conditions and shall be of no force or effect. Furthermore, special terms or conditions of prior orders, including special pricing, will not automatically apply to subsequent orders.
Each order accepted by ES will be treated as a separate contract between ES and the customer.
2.3 ES is entitled to charge management and administrative fees of up to Rupees Five Hundred (Rs 500) in connection with the request for additional services to an existing order. A request for additional services on samples that have entered the laboratory will be treated
as a new order and may postpone estimated delivery date accordingly.
2.4 Any logistic service off-site of the laboratory must be paid in full, unless it has been cancelled or modified by the customer at least forty-eight hours (48) in advance for collection services, ninety-six (96) hours in advance for sampling services and one (1) week in advance
for auditing services.
3. Price and Terms of Payment
3.1 If the acknowledgment of an order does not state otherwise, ES’ prices apply “ex works”, excluding packaging, which is charged separately. Any additional cost or disbursement (e.g., incurred by ES in connection with the order) must be paid by the customer.
3.2. Prices are exclusive of all applicable taxes (GST or Other taxes) and are based on tariffs in force at the day of the remittance of the offer to the customer. Applicable taxes are those in force at the date of invoicing.
3.3 Unless specifically agreed otherwise by ES in its acceptance of an order, payment of all invoices is due strictly within 30 days of the invoice date. Any dispute about invoices must be raised within 30 days of the invoice date. The challenge of a test result will not entitle a
customer to defer payment. Any invoice which remains outstanding after due date, may be additionally charged with an administrative penalty of Rupees Two Hundred (Rs.200) and may carry interest at the rate of one percent (1%) per month or the maximum interest rate
permitted by applicable law, whichever is lower.
3.4 Invoices are subject to a minimum invoice charge of Rupees Five Hundred (Rs.500) ES has the right to charge an administrative fee of up to Rupees One Hundred (Rs 100) to re-issue an invoice.
3.5 The invoice settlement method is Cheque, bank transfer or direct debit. Any other method of payment must receive prior agreement from ES. The customer undertakes to provide bank account details.
3.6 ES is entitled to require payment of up to 100% of the quoted order price as a condition of acceptance.
4. Duties of Customer in Delivering Samples or Materials
4.1 The samples or materials must be in a condition that makes the preparation of reports/analyses or the production of ordered products possible without difficulty. ES is entitled to conduct an initial examination of the samples or materials to check their condition before
processing the samples, drawing up a report or using them in production. The customer shall bear the costs of this initial examination, if the samples or materials do not comply with the requirements described in this clause 4.1. If the result of the initial examination is that
an analysis or production is impossible or is possible only under more difficult conditions than originally anticipated - for example, because the samples or materials have been interspersed with foreign materials or substances that were not reported by the customer or are
degraded - ES shall be entitled to terminate or interrupt the order and the customer shall bear costs incurred by ES to that point.
4.2 The customer must ensure, and hereby warrants, that no sample poses any danger, including on its site, during transportation, in the laboratory or otherwise to ES premises, instruments, personnel or representatives. It is the customer’s responsibility to ensure
compliance with hazardous waste regulations, including regarding information, transportation and disposal and to inform ES personnel or representatives about sample health and safety concerns, including any known or suspected toxic or other contaminant that may be
present in the sample and its likely level of contamination as well as the risks to ES premises, instruments, personnel and representatives related to the contamination. The customer shall be responsible for, and indemnifies ES against, all costs, damages, liabilities and injuries
that may be caused to or incurred by ES or its personnel or representatives including on the sampling site, during the transportation or in the laboratory by the customer’s sample or by sampling site conditions. The customer shall bear all extraordinary costs for adequate
disposal of hazardous waste resulting from the sample, whether or not described as hazardous waste. At ES’ request, the customer must provide ES with the exact composition of the samples.
5. Property Rights on Sample Material and Sample Storage
5.1 All samples become the property of ES to the extent necessary for the performance of the order. Unless the customer pays for storage, ES shall have no obligation or liability for samples sent to ES for storage, including samples requiring refrigeration however ES retains
the sample for three months. If the customer pays for further storage, ES will take commercially reasonable steps to store the samples, according to professional practice.
5.2 ES can dispose of or destroy samples immediately after the analysis has been performed, unless ES and the customer have agreed in writing on the terms of ES’ retention of the sample. ES also can dispose of or destroy the samples after the agreed upon retention period,
without further notice and at customer’s cost, should an extra cost for ES arise to comply with any regulation (for example, with respect to disposal of hazardous waste). If the customer requests the return of unneeded sample material, ES will return them to the customer,
at the customer’s cost and risk.
6. Delivery Dates, Turnaround Time
6.1 Delivery dates and turnaround times are estimates and do not constitute a commitment by ES. Nevertheless, ES shall make commercially reasonable efforts to meet its estimated deadlines.
6.2 Results are generally sent by email and/or by mail, or via other electronic means, to the attention of the persons indicated by the customer in the order, promptly after the analysis is completed.
7. Transfer of Property
7.1 Title in any analysis results, products, equipment, software or similar supplied by ES to the customer will remain with ES until all invoices in respect thereof have been paid by the customer in full, and until such full payment, the customer shall have no property rights or
other rights to use them. In addition, even if ES has accepted and begun to fulfil an order, ES has the right at any time stop processing that order and to stop doing any work for a customer if that customer is late in paying any amount due to ES, whether for that or any other
order.
7.2 Even after payment in full by the customer, ES shall retain the right to store, use and publish all analysis results in an anonymous form which does not identify the customer.
8. Limited Warranties and Responsibilities
8.1 Orders are handled in the conditions available to ES in accordance with the current state of technology and methods developed and generally applied by ES and the results may not always be 100% exact and/ or relevant. Analyses, interpretations, assessments, consulting
work and conclusions are prepared with a commercially reasonable degree of care but ES cannot guarantee that these will always be correct or absolute. This limited warranty expires three months after the delivery date of the samples, if the acknowledgement of the order
does not specifically state otherwise. In all cases, the customer must independently verify the validity of any results, interpretations, assessments and conclusions supplied by ES, if it wishes to rely on the same in respect of matters of importance and shall do so at its own
risk.
8.2 Each testing report relates exclusively to the sample analysed by ES. If ES has not expressly been mandated and paid for the definition of the sampling plan (including which samples of which raw materials and finished products and at which frequency should be analysed)
and the definition of the precise range of analysis to be performed or if the customer has not followed ES recommendations, ES shall not bear any responsibility if the sampling plan and/or the range of analysis to be performed prove to be insufficient or inappropriate.
8.3 The customer is responsible for the proper delivery of samples sent to ES for examination/analyses or materials sent for production. Unless otherwise specifically agreed in writing by ES, ES accepts no responsibility for any loss or damage, which may occur to any sample
in transit or to any facility or site where logistics services are being delivered. The customer will at all times be liable for the security, packaging and insurance of the sample from its dispatch until it is delivered to the offices or the laboratories of ES. ES will use commercially
reasonable care in handling and storing samples, but ES shall not be held responsible for any loss or destruction of samples even after their receipt at its laboratories.
8.4 The customer warrants and represents to ES that all samples sent to ES for analysis are safe and in a stable condition and undertakes to indemnify ES for any losses, injuries, claims and costs which ES, or its personnel, may suffer as a result of any sample not being in a
safe or stable condition, notwithstanding that the customer may have given an indication on the sample or any order form of any perceived problem with the sample. The customer must always inform ES in writing prior to shipment and label the packaging, samples and/ or
containers appropriately, if the samples are dangerous or otherwise of a hazardous nature.
8.5 Unless explicitly agreed in writing by all parties, the contractual relationship shall be exclusively between the customer and ES. There shall be no third-party beneficiary or collateral warranty relating to any order and the customer shall indemnify and hold ES harmless
from and against any and all third-party claims in any way relating to the customer or to the order by the customer.
9. Limitation of Liability
9.1 Except to the extent that such limitations are not permitted or void under applicable law: (a) ES (together with its workers, office clerks, employees, representatives, managers, officers, directors, agents and consultants and all ES partners and affiliates, the “ES
Indemnifying Parties”) shall be liable only for the proven direct and immediate damage caused by the ES Indemnifying Party’s wilful misconduct in connection with the performance of an order and then, only if ES has received written notice thereof not later than six (6)
months after the date of the customer’s knowledge of the relevant claim (unless any longer period is prescribed under applicable law and cannot be contractually limited), and (b) in all cases (whether arising under contract, tort, negligence, strict liability, through
indemnification or otherwise), the ES Indemnifying Parties’ liability per claim or series of related claims, and the customer’s exclusive remedy, with respect to ES’ services which fall under these Terms and Conditions, shall be limited to the lesser of: (i) the direct and immediate
loss or damage caused by the ES Indemnifying Party’s wilful misconduct in connection with the performance of the order and (ii) Invoice amount ES actually received from the customer in relation to the order subject to maximum of Rs.1 lac (Rupees One Lac)
9.2 The ES Indemnifying Parties shall not be liable for any indirect, direct or consequential loss or damage (including, but not limited to, loss of business, profits, goodwill, business opportunities or similar) incurred by the customer or by any third party.
9.3 It is a condition of ES’ acceptance of an order that the customer indemnifies the ES Indemnifying Parties for any losses, injuries, claims and costs which the ES Indemnifying Parties may suffer as a result of arising from or in any way connected with its role under or
services or products or software provided pursuant to these Terms and Conditions, except to the extent that the ES Indemnifying Parties are required to bear them according to these Terms and Conditions, and by placing an order the customer agrees to provide that
indemnification.
10. Repeated Analysis
Objections to test results can be made within thirty (30) days after the customer receives the results. However, unless it would appear that the results of the repeated analysis do not match those of the first one, the customer shall bear the costs of the repeat testing or
review. Furthermore, a repeated analysis will be possible only if ES has a sufficient amount of the original sample on hand when it receives the customer’s objection. Otherwise, the customer will be required to pay all costs, including sampling, transportation, analytical and
disposal costs for the repeat analysis.
11. Force Majeure
ES cannot be held liable for delays, errors, damages or other problems caused by events or circumstances which are unforeseen or beyond ES’ reasonable control, or which result from compliance with governmental requests, laws and regulations.
12. Confidentiality & Processing of Customer Data
12.1 1 ES shall be entitled to save and process personal or commercial data received from the customer in any way, no matter whether such data stem from the customer directly or from a third party and shall use commercially reasonable efforts to keep such data
confidential, in compliance with applicable law.
12.2 2 ES shall use commercially reasonable efforts to keep all analysis results and service reports confidential, subject to ES’ rights set forth in clause 7.2 and the right to use them in order to demonstrate its entitlement to payment for services rendered.
12.3 Analysis results are prepared and supplied exclusively for the use of the customer and should not be divulged to a third party for any purposes without the prior written agreement of ES. In addition, the customer is required to maintain secrecy concerning all services
provided by ES and their results as well as the composition of products and software delivered by ES. Analysis results are not to be publicly disclosed or exploited without the prior written consent of ES. Even if such written consent is given by ES, the customer (a) remains
responsible for any consequences due to the divulgence of such results to a third party and any reliance of such third party on such results and (b) hereby agrees to indemnify the ES Indemnified Parties against any liability which the ES Indemnified Parties may incur as a
result of such divulgence or any such third-party reliance.
12.4 When the laboratory is required by law, or authorized by contractual agreements to disclose confidential information, is the client or individual in question, unless prohibited by law, notified of the information provided.
13. Disclaimer and Miscellaneous
13.1 ALL TERMS, CONDITIONS AND WARRANTIES (INCLUDING ANY IMPLIED WARRANTY AS TO MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE) AS TO THE MANNER, QUALITY AND TIMING OF THE TESTING SERVICE AND RESULTS, EQUIPMENT,
PRODUCTS OR SOFTWARE SUPPLIED BY ES ARE EXCLUDED TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF ES CONTAINED IN THESE TERMS AND CONDITIONS ARE EXCLUSIVE.
13.2 2 These Terms and Conditions may be modified in writing from time to time by ES and orders will be governed by the most recent version of these Terms and Conditions that is in effect at the time ES accepts the order.
13.3 3 Should a court waive, limit or hold to be invalid, illegal or unenforceable any part of these Terms and Conditions, all other parts shall still apply to the greatest extent possible.
13.4 4 Failure by either ES or the customer to exercise the rights under these Terms and Conditions shall not constitute a waiver or forfeiture of such rights.
14. Governing Law/ Jurisdiction
14.1 1 The construction, validity and performance of these Terms and Conditions shall be governed by the laws and the commercial courts of Bangalore Jurisdiction, Karnataka State, India in which the registered office of the ES company which accepted the order in question
is located (including in cases involving multiple counsels for the defence or third-party respondents), which shall have exclusive jurisdiction.

Eurofins Product Testing India Pvt. Ltd.

Reg Address: Plot No 157, Udyog Vihar, Phase – 1, Gurugram- Haryana -122016, India Tele: + 91 124 6250300