Data Sheet

Shut-off valve
Type SVA-S and SVA-L

Assures favorable flow characteristics in industrial refrigeration applications

SVA shut-off valves are available in angleway

and straightway versions and with Standard
neck (SVA-S) and Long neck (SVA-L)

The shut-off valves are designed to meet all

industrial refrigeration application
requirements and are designed to give
favourable flow characteristics and are easy to
dismantle and repair when necessary.

The valve cone is designed to ensure perfect

closing and withstand a high system pulsation
and vibration, which can be present specifically
in the discharge line.

AI242886444057en-001201
Shut-off valve, type SVA-S and SVA-L

Features

• Applicable to HCFC, HFC, R717 (Ammonia), R744 (CO2) and all flammable refrigerants.
• Modular Concept:
◦ Each valve housing is available with several different connection types and sizes
◦ Possible to convert SVA-S or SVA-L to any other product in the Flexline™ SVL family (hand operated regulating
valve, check & stop valve, check valve or strainer) just by replacing the complete top part
• Fast and easy valve overhaul service. It is easy to replace the top part and no welding is needed
• Optional accessories:
◦ Heavy duty industrial hand wheel for frequent operation
◦ Cap for infrequent operation
• Available in angleway and straightway versions with Standard neck or Long neck (DN 15 to DN 40) for insulated
systems
• Each valve type is clearly marked with type, size and performance range
• The valves and caps are prepared for sealing, to prevent operation by unauthorized persons, using a seal wire
• Internal metal backseating: – DN 6 - 65 (¼ - 2½ in.)
• Internal PTFE backseating: – DN 80 - 200 (3 - 8 in.)
• Can accept flow in both directions
• Housing and bonnet material is low temperature steel according to requirements of the Pressure Equipment
Directive and other international classification authorities
• Equipped with stainless steel bolts
• Max. working pressure: 52 bar / 754 psig
• Temperature range: -60/+150 °C (-76/+302 °F)
• Classification: DNV, CRN, BV, EAC etc. To get an updated list of certification on the products please contact your
local Danfoss Sales Company.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 2

Shut-off valve, type SVA-S and SVA-L

Media

Refrigerants
Applicable to HCFC, HFC, R717 (Ammonia), R744 (CO2) and all flammable refrigerants.

New refrigerants
Danfoss products are continually evaluated for use with new refrigerants depending on market requirements.

When a refrigerant is approved for use by Danfoss, it is added to the relevant portfolio, and the R number of the
refrigerant (e.g. R513A) will be added to the technical data of the code number. Therefore, products for specific
refrigerants are best checked at store.danfoss.com/en/, or by contacting your local Danfoss representative.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 3

Shut-off valve, type SVA-S and SVA-L

Product specification

Design
Housing
Made of special, cold resistant steel.

Valve cone
The valve cone can be turned on the spindle, thus there will be no friction between the cone and the seat when the
valve is opened and closed and the special design will avoid cone spin due to pulsation and vibration when the
valve is in open position. A teflon tightening ring provides perfect sealing with minimum closing force.

Spindle
Made of polished stainless steel, ideal for leap seal sealing.

Packing gland
The low temperature packing gland ensures a perfect tightness in the range: -60/+150 °C (-76/+302 °F). The packing
glands are equipped with a scraper ring to prevent penetration of dirt and ice into the packing gland.

Installation
It is recommended that the valves be installed in the direction of flow indicated by the arrow on the valve body. The
valve can be installed in the opposite direction but this slightly reduces the kv-value (Cv-value).

The valve is designed to withstand high internal pressure. However, the piping system in general should be
designed to avoid liquid traps and reduce the risk of hydraulic pressure caused by thermal expansion.

For further information refer to installation instructions for SVA.

Figure 1: Example of Marking Ring

@ –6 0 °
\ –7 C s ig 4p
6°
F /7 5
52
PS
15

/ 3”
0°

D N8 0
C \30
2°F

SVA-S
VE
AL
PV

O
ST

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 4

Shut-off valve, type SVA-S and SVA-L

Pressure and temperature data

Table 1: Pressure and temperature
Description Values
Temperature range -60/+150 °C (-76/+302 °F)
Max. working pressure 52 bar / 754 psig

Maximum opening and closing pressure differential (for sizes 100 to 200)
Figure 2: Flow direction

P2
P1 P2
P1

The maximum opening pressure differential is equal to the maximum pressure difference between inlet and outlet
in the flow direction where the valve can be opened using normal hand force without damaging the valve.

The maximum closing pressure differential is equal to the maximum pressure difference between inlet and outlet in
the flow direction where the valve is sealing according to specifications.

The maximum opening and closing pressure differentials are as default equal to the maximum operating pressure
(PS or MWP) for valve sizes up to and including DN 80.

For valve sizes of DN 100 or larger than DN 100 the opening and closing pressure differential depends on the flow
direction as shown below. Note that the default flow direction indicated by the flow arrow is P1 -> P2.

Table 2: Flow direction

Flow direction
P1 → P2 P2 → P1 P2 → P1
Valve size [DN]
Maximum opening and closing pressure
Maximum closing pressure differential Maximum opening pressure differential
differential
100 44 bar / 638 psi 52 bar / 754 psi 44 bar / 638 psi
125 33 bar / 478 psi 52 bar / 754 psi 33 bar / 478 psi
150 21 bar / 304 psi 52 bar / 754 psi 21 bar / 304 psi
200 14 bar / 203 psi 52 bar / 754 psi 14 bar / 203 psi

Connections
Available with the following connections:
• Butt-weld DIN (EN 10220)
• Butt-weld ANSI (B 36.10 Schedule 80), DN 6 - 40 (¼ - 1½ in.)
• Butt-weld ANSI (B 36.10 Schedule 40), DN 50 - 200 (2 - 8 in.)
• Butt-weld GOST, (8734-75 and 8732-78) DN 10 - 150 (⅜ - 6 in.)
• Socket Weld (ANSI B 16.11), DN 15 - DN 50 (½ - 2 in.)
• Outside pipe thread G ½ in. - G 7/8 in. (ISO 228/1)
• FPT Female Pipe Thread, NPT (ANSI/ASME B 1.20.1), DN 15 - 32 (½ - 1¼ in.)
• Special combination (DN 20 only), Socket weld inlet, FPT ¾ in. outlet
• Special connections Butt-weld F, see (link to AI174086419766_SVL)

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 5

Shut-off valve, type SVA-S and SVA-L

Figure 3: DIN
T
OD

Table 3: Butt-weld DIN (EN 10220)

Size Size OD T OD T kv-angle kv-straight Cv-angle Cv-straight
mm in. mm mm in. in. m3/h m3/h USgal/min USgal/min
6 ¼ 13.5 2.3 0.531 0.091 2.9 2.0 3.4 2.4
10 ⅜ 17.2 2.3 0.677 0.091 4.5 3.2 5.2 3.6
15 ½ 21.3 2.3 0.839 0.091 7.0 4.9 8.1 5.7
20 ¾ 26.9 2.3 1.059 0.091 14.6 10.2 16.9 11.8
25 1 33.7 2.6 1.327 0.103 24.8 17.4 28.8 20.2
32 1¼ 42.4 2.6 1.669 0.102 42.6 29.8 49.4 34.6
40 1½ 48.3 2.6 1.902 0.103 45.2 31.6 52.4 36.7
50 2 60.3 2.9 2.37 0.11 80 65 93 76
65 2½ 76.1 2.9 3 0.11 120 97 140 113
80 3 88.9 3.2 3.50 0.13 182 152 211 176
100 4 114.3 3.6 4.50 0.14 313 278 363 323
125 5 139.7 4.0 5.50 0.16 514 470 596 545
150 6 168.3 4.5 6.63 0.18 785 597 911 693
200 8 219.1 6.3 8.63 0.25 1168 1024 1355 1188

Figure 4: ANSI
T
OD

Table 4: Butt-weld ANSI (B 36.10 Schedule 80)

Size Size OD T OD T kv-angle kv-straight Cv-angle Cv-straight
mm in. mm mm in. in. m3/h m3/h USgal/min USgal/min
6 ¼ 13.5 3.0 0.531 0.118 2.9 2.03 3.4 2.4
10 ⅜ 17.2 3.2 0.677 0.126 4.5 3.15 5.2 3.6
15 ½ 21.3 3.7 0.839 0.146 7.0 4.9 8.1 5.7
20 ¾ 26.9 4.0 1.059 0.158 14.6 10.2 16.9 11.8
25 1 33.7 4.6 1.327 0.181 24.8 17.4 28.8 20.2
32 1¼ 42.4 4.9 1.669 0.193 42.6 29.8 49.4 34.6
40 1½ 48.3 5.1 1.902 0.201 45.2 31.6 52.4 36.7

Table 5: Butt-weld ANSI (B 36.10 Schedule 40)

Size Size OD T OD T kv-angle kv-straight Cv-angle Cv-straight
mm in. mm mm in. in. m3/h m3/h USgal/min USgal/min
50 2 60.3 3.9 2.37 0.15 80 65 93 76
65 2½ 73.0 5.2 2.87 0.20 120 97 140 113
80 3 88.9 5.5 3.50 0.22 182 152 211 176
100 4 114.3 6.0 4.50 0.24 313 278 363 323
125 5 141.3 6.6 5.56 0.26 514 470 596 545
150 6 168.3 7.1 6.63 0.28 785 597 911 693
200 8 219.1 8.2 8.63 0.32 1168 1024 1355 1188

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 6

Shut-off valve, type SVA-S and SVA-L

Figure 5: GOST
T
OD

Table 6: Butt-weld GOST (8734-75 and 8732-78)

Size Size OD T OD T kv-angle kv-straight Cv-angle Cv-straight
mm in. mm mm in. in. m3/h m3/h USgal/min USgal/min
10 ⅜ 14 2 0.551 0.079 4.5 3.2 5.2 3.6
15 ½ 18 2 0.709 0.079 7 4.9 8.1 5.7
20 ¾ 25 2.5 0.984 0.098 14.6 10.2 16.9 11.8
25 1 32 3 1.260 0.118 24.8 17.4 28.8 20.2
32 1¼ 38 3 1.496 0.118 42.6 29.8 49.4 34.6
40 1½ 45 3 1.772 0.118 45.2 31.6 52.4 36.7
50 2 57 3.5 2.244 0.138 80 65 93 76
65 2½ 76.1 2.9 3 0.11 120 97 140 113
80 3 88.9 3.2 3.50 0.13 182 152 211 176
100 4 108 4 4.252 0.157 313 278 363 323
125 5 133 4 5.236 0.157 514 470 596 545
150 6 159 4.5 6.260 0.177 785 597 911 693

Figure 6: SOC

Table 7: Socket welding ANSI (B 16.11)

Size Size OD T OD T L L kv-angle kv-straight Cv-angle Cv-straight
mm in. mm mm in. in. mm in. m3/h m3/h USgal/min USgal/min
15 ½ 21.8 6.0 0.858 0.235 10 0.39 7.0 4.9 8.1 5.7
20 ¾ 27.2 4.6 1.071 0.181 13 0.51 14.6 10.9 16.9 11.8
25 1 33.9 7.2 1.335 0.284 13 0.51 24.8 17.4 28.8 20.2
32 1¼ 42.7 6.1 1.743 0.240 13 0.51 42.6 29.8 49.4 34.6
40 1½ 48.8 6.6 1.921 0.260 13 0.51 45.2 31.6 52.4 36.7
50 2 61.2 6.2 2.41 0.24 16 0.63 80 65 93 76

Figure 7: FPT

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 7

Shut-off valve, type SVA-S and SVA-L

Table 8: FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1)

Size Size kv-angle kv-straight Cv-angle Cv-straight
Inside pipe thread
mm in. m3/h m3/h USgal/min USgal/min
15 ½ (½ × 14 NPT) 8.5 6.0 9.9 7.0
20 ¾ (¾ × 14 NPT) 10 7.0 11.6 8.1
25 1 (1 × 11.5 NPT) 32 22.4 37.1 26.0
32 1¼ (1¼ × 11.5 NPT) 36 25.2 41.8 29.3

Connections - SVA 6
Figure 8: T

Table 9: T outside pipe thread, (ISO 228/1)

Size Size Outside pipe L L kv-angle kv-straight Cv-angle Cv-straight
mm in. thread mm in. m3/h m3/h USgal/min USgal/min
6 ¼ G 1/2 16 0.63 2.5 2.0 2.9 2.0

Figure 9: ND

Table 10: Nipples for T outside pipe thread, (ISO 228/1)

Size Size OD T OD T L L Inside pipe
mm in. mm mm in. in. mm in. thread
6 ¼ 13.5 2.3 0.531 0.091 60 2.36 G½

Figure 10: NA
OD
T

Table 11: NA welding nipples, ANSI (B 36.10 Schedule 80)

Size Size OD T OD T L L Inside pipe
mm in. mm mm in. in. mm in. thread
6 ¼ 13.5 3.0 0.531 0.118 60 2.36 G½

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 8

Shut-off valve, type SVA-S and SVA-L

Material specification
Figure 11: SVA-S 6-10 and SVA-S 15-20
SVA-S 6-10 (¼ - 3/8 in.) SVA-S 15-20 (½ - ¾ in.)
M148B0004_1

M148B0005_1
Danfoss

Danfoss
Welding nipple

Table 12: Material and parts list

No. Part Material EN ISO ASTM
G20Mn5QT, 10213-3 LCC, A352
1 Housing Steel
P285QH+QT, 10222-4 LF2, A350
G20Mn5QT, 10213-3
LCC, A352
2 Bonnet, Flange Steel P285QH+QT, 10222-4
LF2, A350
P275NL, 10028-3
11SMn30 Type 2
3 Bonnet, Insert Steel AISI 1213
10087 R 683/9
X8CrNiS18-9 Type 17
4 Spindle Stainless steel AISI 303
10088 683/13
11SMn30 Type 2
5 Cone Steel AISI 1213
10087 R 683/9
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Handwheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon
19 Locking nut Steel
20 Screw Steel
S235JRG2
22 Welding nipple Steel Fe260B, 630 Grade C, A 283
10025

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 9

Shut-off valve, type SVA-S and SVA-L

No. Part Material EN ISO ASTM

11SMn30 Type 2
23 Nut Steel AISI 1213
10087 R 683/9
24 Packing washer Non-asbestos
25 Disk spring Steel

Figure 12: SVA-S 25-40 (1 - 1½ in.)

M148B0035_1
Danfoss
M148B0038_1
Danfoss

Table 13: Material and parts list

No. Part Material EN ISO ASTM
G20Mn5QT, 10213-3 LCC, A352
1 Housing Steel
P285QH+QT, 10222-4 LF2, A350
G20Mn5QT, 10213-3
LCC, A352
2 Bonnet, Flange Steel P285QH+QT, 10222-4
LF2, A350
P275NL, 10028-3
11SMn30 Type 2
3 Bonnet, Insert Steel AISI 1213
10087 R 683/9
X8CrNiS18-9 Type 17
4 Spindle Stainless steel AISI 303
10088 683/13
11SMn30 Type 2
5 Cone Steel AISI 1213
10087 R 683/9
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Handwheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon
20 Identification ring Stainless steel
21 Disk spring Steel

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 10

Shut-off valve, type SVA-S and SVA-L

Figure 13: SVA-L 15 - 40 (½ - 1½ in.)

M148B0040_1
Danfoss

M148B0041_1
Danfoss
Table 14: Material and parts list
No. Part Material EN ISO ASTM
G20Mn5QT, 10213-3 LCC, A352
1 Housing Steel
P285QH+QT, 10222-4 LF2, A350
G20Mn5QT, 10213-3 LCC, A352
3 Valve bonnet Steel
P285QH+QT, 10222-4 LF2, A350
X8CrNiS18-9 Type 17
4 Spindle Stainless steel AISI 303
10088 683/13
11SMn30 Type 2
5 Cone Steel AISI 1213
10087 R 683/9
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Hand wheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon (PA6)
20 Identification ring Stainless steel
21 Disk spring Steel

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 11

Shut-off valve, type SVA-S and SVA-L

Figure 14: SVA-S 50-65 (2 - 2½ in.)

M148B0036_1
Danfoss
M148B0039_1
Danfoss

Table 15: Material and parts list

No. Part Material EN ISO ASTM
G20Mn5QT, 10213-3 LCC, A352
1 Housing Steel
P285QH+QT, 10222-4 LF2, A350
G20Mn5QT, 10213-3 LCC, A352
3 Valve bonnet Steel
P285QH+QT, 10222-4 LF2, A350
X8CrNiS18-9
Type 17
4 Spindle Stainless steel 10088 AISI 303
683/13
DIN 17440 (SVA-SS only)
11SMn30 Type 2
5 Cone Steel AISI 1213
10087 R 683/9
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Handwheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon
19 Locking nut Steel
20 Identification ring Stainless steel
21 Disk spring Steel

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 12

Shut-off valve, type SVA-S and SVA-L

Figure 15: SVA-S 80 - 150 (3 - 6 in.)

M148B0006_1
Danfoss

M148B0037_1
Danfoss
Table 16: Material and parts list
No. Part Material EN ISO ASTM
G20Mn5QT LCC
1 Housing Steel
10213-3 A352
SVA 80: G20Mn5QT SVA 80: LCC, A352
SVA 100: P285QH+QT SVA 100: LF2, A350
3 Valve bonnet Steel
SVA 125: P285QH+QT SVA 125: LF2, A350
SVA 150: P285QH+QT SVA 150: LF2, A350
X5CrNi18-10 Type 11, AISI 304,
4 Spindle Stainless steel
10088 R 683/13 A276
Cone Steel 11SMn30
5 Type 2, R 683/9 AISI 1213
Cone seal Teflon (PTFE) 10087
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 R 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Hand wheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon (PA 6)
19 Soft backseat Teflon (PTFE)
20 Identification ring Stainless steel
22 Disk spring Steel

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 13

Shut-off valve, type SVA-S and SVA-L

Figure 16: SVA-S 200 (8 in.)

M148B0006_1
Danfoss

M148B0007_1
Danfoss
Table 17: Material and parts list
No. Part Material EN ISO ASTM
G20Mn5QT LCC
1 Housing Steel
10213-3 A352
G20Mn5QT, 10213-3 LCC, A352
3 Valve bonnet Steel
P285QH+QT, 10222-4 LF2, A350
X5CrNi18-10 Type 11, AISI 304,
4 Spindle Stainless steel
10088 R 683/13 A276
Cone Steel 11SMn30
5 Type 2, R 683/9 AISI 1213
Cone seal Teflon (PTFE) 10087
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 R 683/13
9 O-ring Cloroprene (Neoprene)
10 Spring loaded Teflon ring PTFE
11 O-ring Cloroprene (Neoprene)
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Hand wheel Steel
15 Washer Stainless steel
16 Nut Stainless steel
17 Cap Aluminium
18 Gasket for cap Nylon (PA 6)
19 Soft backseat Teflon (PTFE)
20 Identification ring Stainless steel
21 Wear ring Teflon (PTFE)
22 Disk spring Steel
23 O-ring PTFE/Cloroprene (Neoprene)

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 14

Shut-off valve, type SVA-S and SVA-L

Dimensions and weights

SVA 6 -10 in angle execution with handwheel
Figure 17: SVA 6 -10 in angle execution with handwheel
SVA 6-10

ØD
C max.
G

Table 18: SVA 6 -10

Valve size Cmax. G ∅D Weight
mm 128 30 50 0.7 kg
SVA 6
in. 5.04 1.18 1.97 1.54 lb
mm 173 45 60 1.4 kg
SVA 10
in. 6.81 1.77 2.36 3.08 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 15

Shut-off valve, type SVA-S and SVA-L

SVA 6 - 10 in angle execution with cap

Figure 18: SVA 6 - 10 in angle execution with cap
SVA 6-10
ØD
C
G

G
H

Table 19: SVA 6 -10

Valve size C G ∅D H Weight
mm 139 30 30 48 0.8 kg
SVA 6
in. 5.47 1.18 1.18 1.89 1.76 lb
mm 182 45 38 60 1.4 kg
SVA 10
in. 7.17 1.77 1.50 2.36 3.08 lb

 NOTE:
Specified weights are approximate values only.

SVA 6 - 10 in straight-way execution with handwheel / cap

Figure 19: SVA 6 - 10 with handwheel Figure 20: SVA 6 - 10 with cap

øD
øD
Cmax.

C
E
E

G
G B H
Bmax. H

Table 20: SVA 6 - 10 in straight-way execution with handwheel

Valve size Cmax. Bmax. E G ∅D H Weight
mm 110 120 13 70 50 48 0.7 kg
SVA 6
in. 4.33 4.72 0.49 2.76 1.97 1.89 1.54 lb
mm 145 160 20 120 60 60 2.0 kg
SVA 10
in. 5.71 6.30 0.79 4.72 2.36 2.36 4.4 lb

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 16

Shut-off valve, type SVA-S and SVA-L

Table 21: SVA 6 - 10 in straight-way execution with cap

Valve size C B E G ∅D H Weight
mm 110 120 13 70 30 48 0.8 kg
SVA 6
in. 4.33 4.72 0.49 2.76 1.16 1.89 1.76 lb
mm 145 155 20 120 38 60 2.0 kg
SVA 10
in. 5.71 6.10 0.79 4.72 1.50 2.36 4.4 lb

 NOTE:
Specified weights are approximate values only.

SVA 15 - 40 (½ - 1½ in. ) in angleway version with cap / hand wheel

Figure 21: SVA 15 - 40 (½ - 1½ in. ) in angleway version with cap / hand wheel
SVA-xx x x ANG CAP SVA-xx x x ANG CAP
øD2
øD1
K

Cmax.1
Cmax.2
K

G
G

G
G
H
H

Table 22: SVA-S

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 H Weight
SVA 15 - 20 mm 4 178 189 45 60 38 60 1.4 kg
SVA (½ - ¾) in. 0.16 7.00 7.44 1.77 2.36 1.5 2.36 3.1 lb
SVA 25 - 40 mm 12 234 268 55 80 50 70 2.4 kg
SVA (1 - 1½) in. 0.47 9.21 10.55 2.17 3.15 1.97 2.76 5.3 lb

Table 23: SVA-S, Socket weld

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 H Weight
SVA 32 - 40 mm 12 241 275 62 80 50 70 2.9 kg
SVA (1¼ - 1½) in. 0.47 9.49 10.83 2.44 3.15 1.97 2.76 6.4 lb

Table 24: SVA-L

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 H Weight
SVA 15 - 20 mm 63 237 248 45 60 38 60 1.4 kg
SVA (½ - ¾) in. 2.48 9.33 9.76 1.77 2.36 1.5 2.36 3.1 lb
SVA 25 - 40 mm 74 296 330 55 80 50 70 2.4 kg
SVA (1 - 1½) in. 2.91 11.65 12.99 2.17 3.15 1.97 2.76 5.3 lb

Table 25: SVA-L, Socket weld

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 H Weight
SVA 32 - 40 mm 74 303 337 62 80 50 70 2.9 kg
SVA (1¼ - 1½) in. 2.91 11.93 13.27 2.44 3.15 1.97 2.76 6.4 lb

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 17

Shut-off valve, type SVA-S and SVA-L

 NOTE:
Specified weights are approximate values only.

SVA 15 - 40 (½ - 1½ in. ) straightway version with cap / hand wheel

Figure 22: SVA-xx x x STR CAP Figure 23: SVA-xx x x STR H-WHEEL
øD øD1
2

K
K

C max.1
C max.2

E
E

G H
G H
B max.1
B max.2

Table 26: SVA-S

Valve size K Cmax.1 Cmax.2 Bmax.1 Bmax.2 E G ∅D1 ∅D2 H Weight
SVA 15 - 20 mm 4 146 141 160 156 20 120 60 38 60 2.0 kg
SVA (½ - ¾) in. 0.16 5.74 5.55 6.30 6.14 0.79 4.72 2.36 1.5 2.36 4.4 lb
SVA 25 - 40 mm 12 199 208 212 222 26 155 80 50 70 3.0 kg
SVA (1 - 1½) in. 0.47 7.83 8.19 8.35 8.74 1.02 6.10 3.15 1.97 2.76 6.6 lb

Table 27: SVA-S, Socket weld

Valve size K Cmax.1 Cmax.2 Bmax.1 Bmax.2 E G ∅D1 ∅D2 H Weight
SVA 32 mm 12 200 209 212 222 27.4 155 80 50 70 3.0 kg
SVA (1¼) in. 0.47 7.87 8.23 8.35 8.74 1.08 6.10 3.15 1.97 2.76 6.6 lb
SVA 40 mm 12 204 213 212 222 31.0 155 80 50 70 3.0 kg
SVA (1½) in. 0.47 8.03 8.39 8.35 8.74 1.22 6.10 3.15 1.97 2.76 6.6 lb

Table 28: SVA-L

Valve size K Cmax.1 Cmax.2 Bmax.1 Bmax.2 E G ∅D1 ∅D2 H Weight
SVA 15 - 20 mm 63 188 184 202 198 20 120 60 38 60 2.0 kg
SVA (½ - ¾) in. 2.48 7.40 7.24 7.95 7.80 0.79 4.72 2.36 1.5 2.36 4.4 lb
SVA 25 - 40 mm 74 243 252 256 265 26 155 80 50 70 3.0 kg
SVA (1 - 1½) in. 2.91 9.57 9.92 10.08 10.43 1.02 6.10 3.15 1.97 2.76 6.6 lb

Table 29: SVA-L, Socket weld

Valve size K Cmax.1 Cmax.2 Bmax.1 Bmax.2 E G ∅D1 ∅D2 H Weight
SVA 32 mm 74 244 253 256 265 27.4 155 80 50 70 3.0 kg
SVA (1¼) in. 2.91 9.61 9.96 10.08 10.43 1.08 6.10 3.15 1.97 2.76 6.6 lb
SVA 40 mm 74 248 257 256 265 31.0 155 80 50 70 3.0 kg
SVA (1½) in. 2.91 9.76 10.12 10.08 10.43 1.22 6.10 3.15 1.97 2.76 6.6 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 18

Shut-off valve, type SVA-S and SVA-L

SVA 50 - 65 (2 - 2½ in.) in angleway version with cap / hand wheel

Figure 24: SVA-xx x x ANG CAP Figure 25: SVA-xx x x ANG H-WHEEL
øD2 øD1

C max.1
C max.2

K
K

G
G

G G
H

Table 30: SVA-S

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 H Weight
SVA 50 mm 70 284 315 60 100 50 77 3.2 kg
SVA (2) in. 2.76 11.18 12.40 2.36 3.94 1.97 3.03 7.1 lb
SVA 65 mm 70 310 335 70 100 50 90 4.8 kg
SVA (2½) in. 2.76 12.20 13.19 2.76 3.94 1.97 3.54 10.6 lb

Table 31: SVA-S, Socket weld

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 H Weight
SVA 50 mm 70 289 320 65 100 50 77 4.1 kg
SVA (2) in. 2.76 11.38 12.60 2.56 3.94 1.97 3.03 9.0 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 19

Shut-off valve, type SVA-S and SVA-L

SVA 50 - 65 (2 - 2½ in.) in straightway version with cap / hand wheel

Figure 26: SVA-xx x x STR CAP Figure 27: SVA-xx x x STR H-WHEEL

øD
2

øD
1
K
K

C max.1
C max.2
E

G E G
B max.2 B max.1
H

Table 32: SVA-S

Valve size K Bmax.1 Bmax.2 Cmax.1 Cmax.2 E G ∅D1 ∅D2 H Weight
SVA 50 mm 70 259 259 257 257 32 148 100 50 77 4.2 kg
SVA (2) in. 2.76 10.20 10.20 10.12 10.12 1.26 5.83 3.94 1.97 3.03 9.3 lb
SVA 65 mm 70 284 280 284 280 40 176 100 50 90 6.3 kg
SVA (2½) in. 2.76 11.18 11.02 11.18 11.02 1.57 6.93 3.94 1.97 3.54 13.9 lb

Table 33: SVA-S, Socket weld

Valve size K Bmax.1 Bmax.2 Cmax.1 Cmax.2 E G ∅D1 ∅D2 H Weight
SVA 50 mm 70 266 266 261 261 37 162 100 50 77 5.1 kg
SVA (2) in. 2.76 10.47 10.47 10.28 10.28 1.26 6.38 3.94 1.97 3.03 11.2 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 20

Shut-off valve, type SVA-S and SVA-L

SVA 80 - 200 (3 - 8 in.) angleway version with cap / hand wheel

Figure 28: SVA-xx x x ANG CAP Figure 29: SVA-xx x x ANG H-WHEEL
øD2 øD1

K
C max.1
C max.2
K

G
G

G
G
øH

Table 34: SVA-S

Valve size K Cmax.1 Cmax.2 G ∅D1 ∅D2 ∅H Weight
SVA 80 mm 76 373 388 90 200 58 129 9.7 kg
SVA (3) in. 3.00 14.69 15.28 3.54 7.87 2.28 5.08 21.4 lb
SVA 100 mm 90 432 437 106 250 58 156 15.3 kg
SVA (4) in. 3.54 17.00 17.20 4.17 9.84 2.28 6.14 33.7 lb
SVA 125 mm 90 517 533 128 315 74 193 28.1 kg
SVA (5) in. 3.54 20.35 20.98 5.04 12.40 2.91 7.60 61.9 lb
SVA 150 mm 90 564 568 145 315 74 219 39.7 kg
SVA (6) in. 3.54 22.20 22.36 5.71 12.40 2.91 8.62 87.5 lb
SVA 200 mm 90 677 678 180 400 86 276 79.5 kg
SVA (8) in. 3.54 26.63 26.69 7.09 15.75 3.39 10.87 175.3 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 21

Shut-off valve, type SVA-S and SVA-L

SVA 80 - 200 (3 - 8 in.) straightway version with cap / hand wheel

Figure 30: SVA-xx x x STR CAP Figure 31: SVA-xx x x STR H-WHEEL

Table 35: SVA-S

Valve size K Bmax.1 Bmax.2 Cmax.1 Cmax.2 E G ∅D1 ∅D2 ∅H Weight
SVA 80 mm 76 365 321 367 322 48 216 200 58 129 10.9 kg
SVA (3) in. 3.00 14.37 12.64 14.45 12.72 1.89 8.50 7.87 2.28 5.08 24.0 lb
SVA 100 mm 90 435 367 443 375 60 264 250 58 156 18.2 kg
SVA (4) in. 3.54 17.13 14.45 17.44 14.76 2.36 10.39 9.84 2.28 6.14 40.1 lb
SVA 125 mm 90 526 444 538 456 74 322 315 74 193 32.8 kg
SVA (5) in. 3.54 20.71 17.48 21.18 17.95 2.91 12.68 12.40 2.91 7.60 72.3 lb
SVA 150 mm 90 572 483 594 505 91 370 315 74 219 60.0 kg
SVA (6) in. 3.54 22.52 19.02 23.39 19.88 3.58 14.57 12.40 2.91 8.62 132.3 lb
SVA 200 mm 90 692 579 726 613 117 464 400 86 276 111.5 kg
SVA (8) in. 3.54 27.24 22.80 28.58 24.13 4.61 18.27 15.75 3.39 10.87 245.8 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 22

Shut-off valve, type SVA-S and SVA-L

Ordering

Available connection sizes

SVA-S:
The S means Standard bonnet length (sizes from DN50 to DN200 are insulation friendly)

SVA-L:
The L means Long bonnet length (insulation friendly)

Table 36: Connection sizes

Size SVA-S SVA-L
6 x
10 x
15 x x
20 x x
25 x x
32 x x
40 x x
50 x
65 x
80 x
100 x
125 x
150 x
200 x

Please note that the type codes only serve to identify the valves, some of which may not form part of the standard
product range. For further information please contact your local Danfoss Sales Company.

Table 37: Type codes

Valve type SVA Shut-off valve
Available connections
A/D G SOC FPT T
6 DN 6 (¼) x x
10 DN 10 (⅜) x x
15 DN 15 (½) x x x x
20 DN 20 (¾) x x x x(1) x
25 DN 25 (1) x x x x
Nominal size in mm
(valve size measured 32 DN 32 (1¼) x x x x
on the connection 40 DN 40 (1½) x x x
diameter)
50 DN 50 (2) x x x
65 DN 65 (2½) x
80 DN 80 (3) x
100 DN 100 (4) x x
125 DN 125 (5) x x
150 DN 150 (6) x x
200 DN 200 (8) x
Butt-weld connection: ANSI B 36.10 schedule 80, DN 15 - 40 (½ - 1½ in.)
A
Butt-weld connection: ANSI B 36.10 schedule 40, DN 50 - 200 (2 - 8 in.)
D Butt-weld connection: DIN EN 10220
Connections G Butt-weld connection: GOST (8734-75 and 8732-78)
SOC Socket weld: ANSI B 16.11
FPT Female Pipe Thread NPT: ANSI/ASME B 1.20.1
T Outside threaded connections ISO 228/1 Pipe thread
ANG Angle flow
Valve housing
STR Straight flow
H-WHEEL Hand wheel
Other equipment
CAP Cap

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 23

Shut-off valve, type SVA-S and SVA-L

(1)
Special combination SOC-inlet, FPT outlet

 IMPORTANT:
Where products need to be certified according to specific certification societies or where higher pressures are
required, the relevant information should be included at the time of order.

Ordering SVA-S complete valves

Example:
SVA-S 20 DIN angleway with hand wheel = 148B5300

 IMPORTANT:
Where products need to be certified according to specific certification societies or where higher pressures are
required, the relevant information should be included at the time of order.

Table 38: SVA-S Angleway - Butt-weld DIN (EN 10220)

Size MWP
Type Code number
mm in. bar psi
6 ¼ SVA-S 6 D ANG H-WHEEL 52 754 148B5000
6 ¼ SVA-S 6 D ANG CAP 52 754 148B5001
10 ⅜ SVA-S 10 D ANG H-WHEEL 52 754 148B5100
10 ⅜ SVA-S 10 D ANG CAP 52 754 148B5101
15 ½ SVA-S 15 D ANG H-WHEEL 52 754 148B5200
15 ½ SVA-S 15 D ANG CAP 52 754 148B5201
20 ¾ SVA-S 20 D ANG H-WHEEL 52 754 148B5300
20 ¾ SVA-S 20 D ANG CAP 52 754 148B5301
25 1 SVA-S 25 D ANG H-WHEEL 52 754 148B5400
25 1 SVA-S 25 D ANG CAP 52 754 148B5401
32 1¼ SVA-S 32 D ANG H-WHEEL 52 754 148B5500
32 1¼ SVA-S 32 D ANG CAP 52 754 148B5501
40 1½ SVA-S 40 D ANG H-WHEEL 52 754 148B5600
40 1½ SVA-S 40 D ANG CAP 52 754 148B5601
50 2 SVA-S 50 D ANG H-WHEEL 52 754 148B5700
50 2 SVA-S 50 D ANG CAP 52 754 148B5701
65 2½ SVA-S 65 D ANG H-WHEEL 52 754 148B5800
65 2½ SVA-S 65 D ANG CAP 52 754 148B5801
80 3 SVA-S 80 D ANG H-WHEEL 52 754 148B5900
80 3 SVA-S 80 D ANG CAP 52 754 148B5901
100 4 SVA-S 100 D ANG H-WHEEL 52 754 148B6000
100 4 SVA-S 100 D ANG CAP 52 754 148B6001
125 5 SVA-S 125 D ANG H-WHEEL 52 754 148B6100
125 5 SVA-S 125 D ANG CAP 52 754 148B6101
150 6 SVA-S 150 D ANG H-WHEEL 52 754 148B6200
150 6 SVA-S 150 D ANG CAP 52 754 148B6201
200 8 SVA-S 200 D ANG H-WHEEL 52 754 148B6300
200 8 SVA-S 200 D ANG CAP 52 754 148B6301

Table 39: SVA-S Straightway - Butt-weld DIN (EN 10220)

Size MWP
Type Code number
mm in. bar psi
6 ¼ SVA-S 6 D STR H-WHEEL 52 754 148B5010
6 ¼ SVA-S 6 D STR CAP 52 754 148B5011
10 ⅜ SVA-S 10 D STR H-WHEEL 52 754 148B5110
10 ⅜ SVA-S 10 D STR CAP 52 754 148B5111
15 ½ SVA-S 15 D STR H-WHEEL 52 754 148B5210
15 ½ SVA-S 15 D STR CAP 52 754 148B5211
20 ¾ SVA-S 20 D STR H-WHEEL 52 754 148B5310
20 ¾ SVA-S 20 D STR CAP 52 754 148B5311
25 1 SVA-S 25 D STR H-WHEEL 52 754 148B5410
25 1 SVA-S 25 D STR CAP 52 754 148B5411

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 24

Shut-off valve, type SVA-S and SVA-L

Size MWP
Type Code number
mm in. bar psi
32 1¼ SVA-S 32 D STR H-WHEEL 52 754 148B5510
32 1¼ SVA-S 32 D STR CAP 52 754 148B5511
40 1½ SVA-S 40 D STR H-WHEEL 52 754 148B5610
40 1½ SVA-S 40 D STR CAP 52 754 148B5611
50 2 SVA-S 50 D STR H-WHEEL 52 754 148B5710
50 2 SVA-S 50 D STR CAP 52 754 148B5711
65 2½ SVA-S 65 D STR H-WHEEL 52 754 148B5810
65 2½ SVA-S 65 D STR CAP 52 754 148B5811
80 3 SVA-S 80 D STR H-WHEEL 52 754 148B5910
80 3 SVA-S 80 D STR CAP 52 754 148B5911
100 4 SVA-S 100 D STR H-WHEEL 52 754 148B6010
100 4 SVA-S 100 D STR CAP 52 754 148B6011
125 5 SVA-S 125 D STR H-WHEEL 52 754 148B6110
125 5 SVA-S 125 D STR CAP 52 754 148B6111
150 6 SVA-S 150 D STR H-WHEEL 52 754 148B6210
150 6 SVA-S 150 D STR CAP 52 754 148B6211
200 8 SVA-S 200 D STR H-WHEEL 52 754 148B6310
200 8 SVA-S 200 D STR CAP 52 754 148B6311

Table 40: SVA-S Angleway - Butt-weld ANSI (B 36.10 Schedule 80)

Size MWP
Type Code number
mm in. bar psi
6 ¼ SVA-S 6 A ANG H-WHEEL 52 754 148B5020
6 ¼ SVA-S 6 A ANG CAP 52 754 148B5021
10 ⅜ SVA-S 10 A ANG H-WHEEL 52 754 148B5120
10 ⅜ SVA-S 10 A ANG CAP 52 754 148B5121
15 ½ SVA-S 15 A ANG H-WHEEL 52 754 148B5220
15 ½ SVA-S 15 A ANG CAP 52 754 148B5221
20 ¾ SVA-S 20 A ANG H-WHEEL 52 754 148B5320
20 ¾ SVA-S 20 A ANG CAP 52 754 148B5321
25 1 SVA-S 25 A ANG H-WHEEL 52 754 148B5420
25 1 SVA-S 25 A ANG CAP 52 754 148B5421
32 1¼ SVA-S 32 A ANG H-WHEEL 52 754 148B5520
32 1¼ SVA-S 32 A ANG CAP 52 754 148B5521
40 1½ SVA-S 40 A ANG H-WHEEL 52 754 148B5620
40 1½ SVA-S 40 A ANG CAP 52 754 148B5621

Table 41: SVA-S Straightway - Butt-weld ANSI (B 36.10 Schedule 80)

Size MWP
Type Code number
mm in. bar psi
6 ¼ SVA-S 6 A STR H-WHEEL 52 754 148B5030
6 ¼ SVA-S 6 A STR CAP 52 754 148B5031
10 ⅜ SVA-S 10 A STR H-WHEEL 52 754 148B5130
10 ⅜ SVA-S 10 A STR CAP 52 754 148B5131
15 ½ SVA-S 15 A STR H-WHEEL 52 754 148B5230
15 ½ SVA-S 15 A STR CAP 52 754 148B5231
20 ¾ SVA-S 20 A STR H-WHEEL 52 754 148B5330
20 ¾ SVA-S 20 A STR CAP 52 754 148B5331
25 1 SVA-S 25 A STR H-WHEEL 52 754 148B5430
25 1 SVA-S 25 A STR CAP 52 754 148B5431
32 1¼ SVA-S 32 A STR H-WHEEL 52 754 148B5530
32 1¼ SVA-S 32 A STR CAP 52 754 148B5531
40 1½ SVA-S 40 A STR H-WHEEL 52 754 148B5630
40 1½ SVA-S 40 A STR CAP 52 754 148B5631

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 25

Shut-off valve, type SVA-S and SVA-L

Table 42: SVA-S Angleway - Butt-weld ANSI (B 36.10 Schedule 40)

Size MWP
Type Code number
mm in. bar psi
50 2 SVA-S 50 A ANG H-WHEEL 52 754 148B5720
50 2 SVA-S 50 A ANG CAP 52 754 148B5721
65 2½ SVA-S 65 A ANG H-WHEEL 52 754 148B5820
65 2½ SVA-S 65 A ANG CAP 52 754 148B5821
80 3 SVA-S 80 A ANG H-WHEEL 52 754 148B5920
80 3 SVA-S 80 A ANG CAP 52 754 148B5921
100 4 SVA-S 100 A ANG H-WHEEL 52 754 148B6020
100 4 SVA-S 100 A ANG CAP 52 754 148B6021
125 5 SVA-S 125 A ANG H-WHEEL 52 754 148B6120
125 5 SVA-S 125 A ANG CAP 52 754 148B6121
150 6 SVA-S 150 A ANG H-WHEEL 52 754 148B6220
150 6 SVA-S 150 A ANG CAP 52 754 148B6221
200 8 SVA-S 200 A ANG H-WHEEL 52 754 148B6320
200 8 SVA-S 200 A ANG CAP 52 754 148B6321

Table 43: SVA-S Straightway - Butt-weld ANSI (B 36.10 Schedule 40)

Size MWP
Type Code number
mm in. bar psi
50 2 SVA-S 50 A STR H-WHEEL 52 754 148B5730
50 2 SVA-S 50 A STR CAP 52 754 148B5731
65 2½ SVA-S 65 A STR H-WHEEL 52 754 148B5830
65 2½ SVA-S 65 A STR CAP 52 754 148B5831
80 3 SVA-S 80 A STR H-WHEEL 52 754 148B5930
80 3 SVA-S 80 A STR CAP 52 754 148B5931
100 4 SVA-S 100 A STR H-WHEEL 52 754 148B6030
100 4 SVA-S 100 A STR CAP 52 754 148B6031
125 5 SVA-S 125 A STR H-WHEEL 52 754 148B6130
125 5 SVA-S 125 A STR CAP 52 754 148B6131
150 6 SVA-S 150 A STR H-WHEEL 52 754 148B6230
150 6 SVA-S 150 A STR CAP 52 754 148B6231
200 8 SVA-S 200 A STR H-WHEEL 52 754 148B6330
200 8 SVA-S 200 A STR CAP 52 754 148B6331

Table 44: SVA-S Angleway - Butt-weld, GOST

Size MWP
Type Code number
mm in. bar psi
150 6 SVA-S 150 G ANG H-WHEEL 52 754 148B6240
150 6 SVA-S 150 G ANG CAP 52 754 148B6241

Table 45: SVA-S Straightway - Butt-weld, GOST

Size MWP
Type Code number
mm in. bar psi
150 6 SVA-S 150 G STR H-WHEEL 52 754 148B6250
150 6 SVA-S 150 G STR CAP 52 754 148B6251

Table 46: SVA-S Angleway - Socket welding ANSI (B 16.11)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S 15 SOC ANG H-WHEEL 52 754 148B5222
15 ½ SVA-S 15 SOC ANG CAP 52 754 148B5223
20 ¾ SVA-S 20 SOC ANG H-WHEEL 52 754 148B5322
20 ¾ SVA-S 20 SOC ANG CAP 52 754 148B5323
25 1 SVA-S 25 SOC ANG H-WHEEL 52 754 148B5422
25 1 SVA-S 25 SOC ANG CAP 52 754 148B5423
32 1¼ SVA-S 32 SOC ANG H-WHEEL 52 754 148B5522
32 1¼ SVA-S 32 SOC ANG CAP 52 754 148B5523
40 1½ SVA-S 40 SOC ANG H-WHEEL 52 754 148B5622

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 26

Shut-off valve, type SVA-S and SVA-L

Size MWP
Type Code number
mm in. bar psi
40 1½ SVA-S 40 SOC ANG CAP 52 754 148B5623
50 2 SVA-S 50 SOC ANG H-WHEEL 52 754 148B5722
50 2 SVA-S 50 SOC ANG CAP 52 754 148B5723

Table 47: SVA-S Straightway - Socket welding ANSI (B 16.11)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S 15 SOC STR H-WHEEL 52 754 148B5232
15 ½ SVA-S 15 SOC STR CAP 52 754 148B5233
20 ¾ SVA-S 20 SOC STR H-WHEEL 52 754 148B5332
20 ¾ SVA-S 20 SOC STR CAP 52 754 148B5333
25 1 SVA-S 25 SOC STR H-WHEEL 52 754 148B5432
25 1 SVA-S 25 SOC STR CAP 52 754 148B5433
32 1¼ SVA-S 32 SOC STR H-WHEEL 52 754 148B5532
32 1¼ SVA-S 32 SOC STR CAP 52 754 148B5533
40 1½ SVA-S 40 SOC STR H-WHEEL 52 754 148B5632
40 1½ SVA-S 40 SOC STR CAP 52 754 148B5633
50 2 SVA-S 50 SOC STR H-WHEEL 52 754 148B5732
50 2 SVA-S 50 SOC STR CAP 52 754 148B5733

Table 48: SVA-S Angleway - FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S 15 FPT ANG H-WHEEL 52 754 148B5224
15 ½ SVA-S 15 FPT ANG CAP 52 754 148B5225
20 ¾ SVA-S 20 FPT ANG H-WHEEL 52 754 148B5324
20 ¾ SVA-S 20 FPT ANG CAP 52 754 148B5325
25 1 SVA-S 25 FPT ANG H-WHEEL 52 754 148B5424
25 1 SVA-S 25 FPT ANG CAP 52 754 148B5425
32 1¼ SVA-S 32 FPT ANG H-WHEEL 52 754 148B5524
32 1¼ SVA-S 32 FPT ANG CAP 52 754 148B5525

Table 49: SVA-S Straightway - FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S 15 FPT STR H-WHEEL 52 754 148B5234
15 ½ SVA-S 15 FPT STR CAP 52 754 148B5235
20 ¾ SVA-S 20 FPT STR H-WHEEL 52 754 148B5334
20 ¾ SVA-S 20 FPT STR CAP 52 754 148B5335
25 1 SVA-S 25 FPT STR H-WHEEL 52 754 148B5434
25 1 SVA-S 25 FPT STR CAP 52 754 148B5435
32 1¼ SVA-S 32 FPT STR H-WHEEL 52 754 148B5534
32 1¼ SVA-S 32 FPT STR CAP 52 754 148B5535

Table 50: SVA-S Angleway - T outside pipe thread, (ISO 228/1)

Size MWP
Type Code number
mm in. bar psi
6 ¼ SVA-S 6 T ANG CAP 52 754 148B5032

Table 51: SVA-S Straightway - Socket welding ANSI (B 16.11) inlet, FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1) outlet
Size MWP
Type Code number
mm in. bar psi
20 ¾ SVA-S 20 SOC/FPT STR H-WHEEL 52 754 148B6790
20 ¾ SVA-S 20 SOC/FPT STR CAP 52 754 148B6792

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 27

Shut-off valve, type SVA-S and SVA-L

Table 52: SVA-S Angleway - Socket welding ANSI (B 16.11) inlet, FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1) outlet
Size MWP
Type Code number
mm in. bar psi
20 ¾ SVA-S 20 SOC/FPT ANG H-WHEEL 52 754 148B6789
20 ¾ SVA-S 20 SOC/FPT ANG CAP 52 754 148B6791

ANG = Angleway
STR = Straightway
CAP = Cap
H-WHEEL = Hand wheel

Ordering SVA-L complete valves

Example:
SVA-L 20 DIN angleway with hand wheel = 148B5340

 IMPORTANT:
Where products need to be certified according to specific certification societies or where higher pressures are
required, the relevant information should be included at the time of order.

Table 53: SVA-L Angleway - Butt-weld DIN (EN 10220)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 D ANG H-WHEEL 52 754 148B5240
15 ½ SVA-L 15 D ANG CAP 52 754 148B5241
20 ¾ SVA-L 20 D ANG H-WHEEL 52 754 148B5340
20 ¾ SVA-L 20 D ANG CAP 52 754 148B5341
25 1 SVA-L 25 D ANG H-WHEEL 52 754 148B5440
25 1 SVA-L 25 D ANG CAP 52 754 148B5441
32 1¼ SVA-L 32 D ANG H-WHEEL 52 754 148B5540
32 1¼ SVA-L 32 D ANG CAP 52 754 148B5541
40 1½ SVA-L 40 D ANG H-WHEEL 52 754 148B5640
40 1½ SVA-L 40 D ANG CAP 52 754 148B5641

Table 54: SVA-L Straightway - Butt-weld DIN (EN 10220)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 D STR H-WHEEL 52 754 148B5250
15 ½ SVA-L 15 D STR CAP 52 754 148B5251
20 ¾ SVA-L 20 D STR H-WHEEL 52 754 148B5350
20 ¾ SVA-L 20 D STR CAP 52 754 148B5351
25 1 SVA-L 25 D STR H-WHEEL 52 754 148B5450
25 1 SVA-L 25 D STR CAP 52 754 148B5451
32 1¼ SVA-L 32 D STR H-WHEEL 52 754 148B5550
32 1¼ SVA-L 32 D STR CAP 52 754 148B5551
40 1½ SVA-L 40 D STR H-WHEEL 52 754 148B5650
40 1½ SVA-L 40 D STR CAP 52 754 148B5651

Table 55: SVA-L Angleway - Butt-weld ANSI (B 36.10 Schedule 80)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 A ANG H-WHEEL 52 754 148B5260
15 ½ SVA-L 15 A ANG CAP 52 754 148B5261
20 ¾ SVA-L 20 A ANG H-WHEEL 52 754 148B5360
20 ¾ SVA-L 20 A ANG CAP 52 754 148B5361
25 1 SVA-L 25 A ANG H-WHEEL 52 754 148B5460
25 1 SVA-L 25 A ANG CAP 52 754 148B5461
32 1¼ SVA-L 32 A ANG H-WHEEL 52 754 148B5560

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 28

Shut-off valve, type SVA-S and SVA-L

Size MWP
Type Code number
mm in. bar psi
32 1¼ SVA-L 32 A ANG CAP 52 754 148B5561
40 1½ SVA-L 40 A ANG H-WHEEL 52 754 148B5660
40 1½ SVA-L 40 A ANG CAP 52 754 148B5661

Table 56: SVA-L Straightway - Butt-weld ANSI (B 36.10 Schedule 80)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 A STR H-WHEEL 52 754 148B5270
15 ½ SVA-L 15 A STR CAP 52 754 148B5271
20 ¾ SVA-L 20 A STR H-WHEEL 52 754 148B5370
20 ¾ SVA-L 20 A STR CAP 52 754 148B5371
25 1 SVA-L 25 A STR H-WHEEL 52 754 148B5470
25 1 SVA-L 25 A STR CAP 52 754 148B5471
32 1¼ SVA-L 32 A STR H-WHEEL 52 754 148B5570
32 1¼ SVA-L 32 A STR CAP 52 754 148B5571
40 1½ SVA-L 40 A STR H-WHEEL 52 754 148B5670
40 1½ SVA-L 40 A STR CAP 52 754 148B5671

Table 57: SVA-L Angleway - Socket welding ANSI (B 16.11)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 SOC ANG H-WHEEL 52 754 148B5262
15 ½ SVA-L 15 SOC ANG CAP 52 754 148B5263
20 ¾ SVA-L 20 SOC ANG H-WHEEL 52 754 148B5362
20 ¾ SVA-L 20 SOC ANG CAP 52 754 148B5363
25 1 SVA-L 25 SOC ANG H-WHEEL 52 754 148B5462
25 1 SVA-L 25 SOC ANG CAP 52 754 148B5463
32 1¼ SVA-L 32 SOC ANG H-WHEEL 52 754 148B5562
32 1¼ SVA-L 32 SOC ANG CAP 52 754 148B5563
40 1½ SVA-L 40 SOC ANG H-WHEEL 52 754 148B5662
40 1½ SVA-L 40 SOC ANG CAP 52 754 148B5663

Table 58: SVA-L Straightway - Socket welding ANSI (B 16.11)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 SOC STR H-WHEEL 52 754 148B5272
15 ½ SVA-L 15 SOC STR CAP 52 754 148B5273
20 ¾ SVA-L 20 SOC STR H-WHEEL 52 754 148B5372
20 ¾ SVA-L 20 SOC STR CAP 52 754 148B5373
25 1 SVA-L 25 SOC STR H-WHEEL 52 754 148B5472
25 1 SVA-L 25 SOC STR CAP 52 754 148B5473
32 1¼ SVA-L 32 SOC STR H-WHEEL 52 754 148B5572
32 1¼ SVA-L 32 SOC STR CAP 52 754 148B5573
40 1½ SVA-L 40 SOC STR H-WHEEL 52 754 148B5672
40 1½ SVA-L 40 SOC STR CAP 52 754 148B5673

Table 59: SVA-L Angleway - FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 FPT ANG H-WHEEL 52 754 148B5264
15 ½ SVA-L 15 FPT ANG CAP 52 754 148B5265
20 ¾ SVA-L 20 FPT ANG H-WHEEL 52 754 148B5364
20 ¾ SVA-L 20 FPT ANG CAP 52 754 148B5365
25 1 SVA-L 25 FPT ANG H-WHEEL 52 754 148B5464
25 1 SVA-L 25 FPT ANG CAP 52 754 148B5465
32 1¼ SVA-L 32 FPT ANG H-WHEEL 52 754 148B5564
32 1¼ SVA-L 32 FPT ANG CAP 52 754 148B5565

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 29

Shut-off valve, type SVA-S and SVA-L

Table 60: SVA-L Straightway - FPT inside pipe thread, NPT (ANSI/ASME B 1.20.1)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L 15 FPT STR H-WHEEL 52 754 148B5274
15 ½ SVA-L 15 FPT STR CAP 52 754 148B5275
20 ¾ SVA-L 20 FPT STR H-WHEEL 52 754 148B5374
20 ¾ SVA-L 20 FPT STR CAP 52 754 148B5375
25 1 SVA-L 25 FPT STR H-WHEEL 52 754 148B5474
25 1 SVA-L 25 FPT STR CAP 52 754 148B5475
32 1¼ SVA-L 32 FPT STR H-WHEEL 52 754 148B5574
32 1¼ SVA-L 32 FPT STR CAP 52 754 148B5575

ANG = Angleway
STR = Straightway
CAP = Cap
H-WHEEL = Hand wheel

Accessories
Table 61: 6T Nipple Kit solution
Code no. Description
148B4245 ACCESSORY WELD.NIPPLE DN6 A + UNION NUT
148B4184 ACCESSORY WELD.NIPPLE DN6 D + UNION NUT

Ordering SVA-S from the parts programme

Example (select from below two tables)

Figure 32: SVA-S parts assembling

+ =

Valve housing, size 25 (1 in.), Top part, SVA-S

DIN butt weld, angleway, size 25 (1 in.) with cap
148B5452 148B5476

Figure 33: DN 6-10 mm (¼ - ⅜ in.) Figure 34: DN 15-65 mm (½ - 2½ in.) Figure 35: DN 80-125 mm (3 - 5 in.)

Table 62: SVL valve housings w/different connections

Valve Housing SVL
Sizes [DN]
DIN-Butt weld ANSI-Butt weld GOST-Butt-weld SOC FPT T
mm in. ANG STR ANG STR ANG STR ANG STR ANG STR ANG
6 ¼ 148B5002 148B5003 148B5004 148B5005 - - - - - - 148B5012
10 ⅜ 148B5122 148B5123 148B5124 148B5125 148B5134 148B5135 - - - - -
15 ½ 148B5252 148B5253 148B5254 148B5255 148B5391 148B5392 148B5256 148B5257 148B5258 148B5259 -
20 ¾ 148B5352 148B5353 148B5354 148B5355 148B5393 148B5394 148B5356 148B5357 148B5358 148B5359 -

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 30

Shut-off valve, type SVA-S and SVA-L

Valve Housing SVL

Sizes [DN]
DIN-Butt weld ANSI-Butt weld GOST-Butt-weld SOC FPT T
mm in. ANG STR ANG STR ANG STR ANG STR ANG STR ANG
25 1 148B5452 148B5453 148B5454 148B5455 148B5498 148B5499 148B5456 148B5457 148B5458 148B5459 -
32 1¼ 148B5576 148B5577 148B5578 148B5579 148B5593 148B5594 148B5580 148B5581 148B5582 148B5583 -
40 1½ 148B5652 148B5653 148B5654 148B5655 148B5681 148B5682 148B5656 148B5657 - - -
50 2 148B5741 148B5742 148B5743 148B5744 148B5759 148B5760 148B5745 148B5746 - - -
65 2½ 148B5816 148B5817 148B5818 148B5819 148B5816 148B5817 - - - - -
80 3 148B5912 148B5913 148B5914 148B5915 148B5912 148B5913 - - - - -
100 4 148B6014 148B6015 148B6016 148B6017 148B6033 148B6034 - - - - -
125 5 148B6112 148B6113 148B6114 148B6115 148B6133 148B6134 - - - - -

 NOTE:
Not all sizes available for SVA-L - see next following table

Figure 36: SVA complete top parts

SVA-S 6-10 SVA-S 6-10 SVA-S 15-65 SVA-S 15-65 SVA-S 80-125 SVA-S 80-125 SVA-L 15-40 SVA-L 15-40
with cap with h-wheel with cap with h-wheel with cap with h-wheel with cap with h-wheel

Table 63: SVA complete top part including gaskets and bolts
Sizes [DN] Complete top part
SVA-S SVA-S SVA-L SVA-L
mm in.
CAP H-WHEEL CAP H-WHEEL
6 ¼ - -
148B5013 148B5014
10 ⅜ - -
15 ½
148B5276 148B5277 148B5278 148B5279
20 ¾
25 1
32 1¼ 148B5476 148B5477 148B5478 148B5479
40 1½
50 2 148B5728 148B5729 - -
65 2½ 148B5822 148B5823 - -
80 3 148B5916 148B5917 - -
100 4 148B6012 148B6018 - -
125 5 148B6116 148B6117 - -

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 31

Shut-off valve, type SVA-S and SVA-L

Certificates, declarations, and approvals

The list contains all certificates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.

Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.

Valid approvals
Table 64: Pressure Equipment Directive (PED)
SVA valves are approved according to the European standard specified in the Pressure Equipment Directive and are CE
marked.

For further details / restrictions - see Installation Instruction.

Table 65: SVA

SVA
Nominal bore DN≤ 25 mm (1 in.) DN32-80 mm (1¼ - 3 in.) DN100 - 200 mm (4-8 in.)
Classified for Fluid group I
Category Article 3, paragraph 3 II III

Table 66: Certificates and declarations

File name Document type Document topic Approval authority
03709-F0 BV Marine - Safety Certificate - BV
TAP0000003 Rev. 1 Marine - Safety Certificate - DNV GL
033F0685.AK EU Declaration EMCD/PED Danfoss
033F0691.AE Manufacturers Declaration RoHS Danfoss
0045 202 1204 Z 00354 19 D 001(00) Pressure - Safety Certificate PED TÜV
0045 202 1204 Z 00355 19 D 001(00) Pressure - Safety Certificate - TÜV
033F0453.AD Manufacturers Declaration ATEX Danfoss
19.10048.266 Marine - Safety Certificate - RMRS

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 32

 Online support

Danfoss offers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.

The Danfoss Product Store

The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certifications, accessories,
and more.
Start browsing at store.danfoss.com.

Find technical documentation

Find the technical documentation you need to get your project up and running. Get direct access to
our official collection of data sheets, certificates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.

Start searching now at www.danfoss.com/en/service-and-support/documentation.

Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specifically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.

Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.

Get local information and support

Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.

Find your local Danfoss website here: www.danfoss.com/en/choose-region.

Spare Parts
Get access to the Danfoss spare parts and service kit catalog right from your smartphone. The app
contains a wide range of components for air conditioning and refrigeration applications, such as
valves, strainers, pressure switches, and sensors.

Download the Spare Parts app for free at www.danfoss.com/en/service-and-support/downloads.

Coolselector®2 - find the best components for you HVAC/R system

Coolselector®2 makes it easy for engineers, consultants, and designers to find and order the best
components for refrigeration and air conditioning systems. Run calculations based on your operating
conditions and then choose the best setup for your system design.

Download Coolselector®2 for free at coolselector.danfoss.com.

Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other
technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download,
shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any
responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to
products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material
are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.

© Danfoss | Climate Solutions | 2022.01 AI242886444057en-001201 | 33