ENGLISH

DEUTSCH

FRANÇAIS

Network Audio Receiver ITALIANO

NR1200 ESPAÑOL

NEDERLANDS

SVENSKA
Quick Start Guide
Kurzanleitung / Guide de démarrage rapide / Guida di Avvio Rapido /
РУССКИЙ
Guía de inicio rápido / Snelhandleiding / Snabbstartsguide /
Краткое руководство пользователя / Skrócona instrukcja obsługi
POLSKI
Read Me First....
Bitte zuerst lesen... / Lisez-moi en premier.... / Nota preliminare.... /
Lea esto primero.... / Lees mij eerst... / Läs detta först... /
Прочитайте в первую очередь... / Przeczytaj to najpierw....

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 1 2019/06/21 9:35:54
 Welcome Before You Begin
Thank you for choosing a Marantz audio
receiver.
Required for Setup
This guide provides step-by-step
instructions for setting up your audio
receiver.

Speaker systems Speaker cables

Please do not return this unit to the
store – call for assistance.
If you need help… :
Optional
If you need additional help in solving
problems, contact Marantz customer
service in your area.
www.marantz.com
Subwoofer Subwoofer cable

or

TV HDMI cable LAN cable Wi-Fi router

• When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC
functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• These drawings are for illustrative purposes only and may not represent the actual product(s).

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 1 2019/06/21 9:35:55
 What’s In the Box Important: External Antennas
Quick Start Power cord The removable external antennas are required for both
Guide Bluetooth and Wireless network connectivity. Please make
Safety DAB/FM indoor sure to connect the antennas before attempting to use the
Instructions antenna Bluetooth or Wi-Fi features of the NR1200.
Cautions on Remote control unit nn Connecting the external antennas for
Using Batteries (RC041SR)
Bluetooth / Wireless connectivity
Notes on radio R03/AAA batteries For each of the two antennas:
q Place the antenna evenly over the antenna terminal located
Receiver External antennas at the upper left or right corner of the rear panel.
for Bluetooth / w Turn the antenna clockwise until it is fully connected. Do not
wireless connectivity
over tighten.
e Rotate the antenna upwards for the best possible reception.

q w e

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 2 2019/06/21 9:35:56
 Setup
1 Installing batteries in
the remote control unit
2-1 Setup by connecting to TV Page 4

2-2 Setup without connecting to TV Page 9

Batteries

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 3 2019/06/21 9:35:56
 2-1 Setup by connecting to TV

1) Place the receiver near your TV and

connect the power cord
4

9 TV

Receiver

Power cord (supplied)

Connect to household
power outlet
(AC 230 V, 50/60 Hz)

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 4 2019/06/21 9:35:56
 2-1 Setup by connecting to TV

2) Connect the receiver to your home network

Wired LAN Wireless LAN
Connect an Ethernet cable (not included) between your When connecting to wireless LAN (Wi-Fi), follow the
receiver and your network router. instructions in “Connecting the external antennas for
Bluetooth / Wireless connectivity” (vpage 2) and
connect the antennas.

To LAN port

Router

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 5 2019/06/21 9:35:56
 3) Connect the receiver to your TV with 4) Turn on the TV
an HDMI cable
HDMI IN
(ARC)

HDMI cable
TV remote control unit
HDMI OUT
MONITOR
(ARC) 5) Select the appropriate HDMI input on
your TV
HDMI

Receiver (Rear panel)

TV/
INPUT or
ARC (Audio Return Channel): VIDEO
If your TV supports ARC, your TV can send audio back to the receiver
when you are using your TV’s built-in video sources (TV tuner, Smart TV
streaming services, etc.) ARC requires that you enable HDMI CEC on your
TV. Please refer to your TV’s Owner’s Manual for instructions on how to
setup HDMI CEC. Note that some TV Manufacturers use other names for
the HDMI CEC function.
TV remote control unit

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 6 2019/06/21 9:35:56
 2-1 Setup by connecting to TV

6) Turn on the receiver 7) Verify the connection

• Press X to turn on the receiver. • Verify that you can see this screen on your TV.

Setup Assistant
Pl e a s e s e l e ct a l a n gua ge...
English
Deutsch
Français
Italiano
Español
Nederlands
Svenska
Pусский
Polski

If this screen is not displayed, please go back and retry

the steps again in the recommended sequence.

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 7 2019/06/21 9:35:57
 8) Now TV is connected to the receiver,
please follow the on-screen setup Setup Assistant

assistant P l e as e s e l e c t a l an guage . . .
English
Deutsch
The Setup Assistant will walk you through connecting Français

and configuring your speakers and components to your Italiano

Español
Marantz receiver. Please use the remote control and Nederlands
Svenska
follow the on-screen instructions. Pусский
Polski

After completing the On-Screen

Page 21
Setup Assistant

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 8 2019/06/21 9:35:57
 2-2 Setup without connecting to TV

1) Connecting to speakers 2) Connecting to the playback

equipment in accordance with
q w e r
10 mm instruction on the rear panel
Ex.) Connecting to CD player

R L

Subwoofer R L
R L
CD player

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 9 2019/06/21 9:35:57
 3) Connecting to antenna of tuner 4) Connecting to an Ethernet cable
If you want to connect the receiver to your Home
Network via Wireless LAN, you can skip this step and
go to “5) Connect the power cord”.
DAB/FM indoor
antenna (supplied)

To LAN port

Router

10

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 10 2019/06/21 9:35:57
 2-2 Setup without connecting to TV

5) Connect the power cord 6) Turn on the receiver

Receiver

Power cord (supplied)

Connect to household
power outlet
(AC 230 V, 50/60 Hz)

11

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 11 2019/06/21 9:35:57
 7) On the display of “Setup on TV”, Connect the receiver to the
Page 13
use o p to select “No”, then press Home network via Wireless LAN.
ENTER
When the Ethernet Cable is connected
Page 21
and the Wireless LAN is not used.
Setup on TV: No

On-Screen Setup Assistant is cancelled and the receiver

is available to use. In addition, the receiver is able to be
set up from Setup Menu whenever you want.

12

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 12 2019/06/21 9:36:01
 2-2 Setup without connecting to TV

8) Connect Wireless LAN

8.1) Connect the two antennas. 8.2) Press SETUP on the remote
When connecting to wireless LAN (Wi-Fi), follow the control.
instructions in “Connecting the external antennas for
Bluetooth / Wireless connectivity” (vpage 2)
and connect the antennas.

You can see the following on the display.

Audio

13

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 13 2019/06/21 9:36:01
 8.3) Use ui to select “Network”, then 8.5) Select “Connect: Wi-Fi”.
press ENTER.
Connect:Wi-Fi

• If “Connect: Wired” is displayed, press ENTER, use o p to select

“Wi-Fi” and press ENTER.
8.4) Use ui to select “Connection”,
then press ENTER. 8.6) Use ui to select “Wi-Fi Setup”,
Connection then press ENTER.
Wi-Fi Setup
• “Connection” can’t be selected while network module is setting up.
Please wait for the completion of this setting up. This might take up to 1
minute.

14

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 14 2019/06/21 9:36:01
 2-2 Setup without connecting to TV
8.7) Choose from one of the following options.
Scan Network q Use ui to select “Scan Network”, then press ENTER.
Select the network from the network list.

Wi-Fi router

Use iOS Device (iOS version 7 or later) q Use ui to select “Use iOS Device”, then press ENTER.
By connecting the receiver with iOS Device (iPhone/
iPod/iPad), the receiver can be connected to the
network automatically.
Use iOS Device

WPS Router q Use ui to select “WPS Router”, then press ENTER.

Use a WPS-compatible router to connect using
the push button method.

Wi-Fi router

Manual q Use ui to select “Manual”, then press ENTER.

Enter the name (SSID) and password of the network you wish
to connect to.

Manual

15

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 15 2019/06/21 9:36:02
 w Use ui to select the network, then press ENTER.
(Use o to select “Rescan” if your network name is not listed.)

w Make sure your iOS device is connected to your Wi-Fi Network. Select the
network named “Marantz NR1200” from the Settings/Wi-Fi screen on your
device. NR1200
Marantz NR1200 CEOL

w Switch to the WPS mode by pressing the WPS button of the router you
wish to connect to.

w Use ui to select “SSID” and press ENTER, enter the name e Use ui to select “Sec” and press ENTER, then use o p to select
(SSID) of the network, then select “OK” which is at the end of the the encryption method according to the setting of access point.
character table. For how to input, check Page 18.

SSID Sec : WPA2(AES)

16

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 16 2019/06/21 9:36:03
 2-2 Setup without connecting to TV

Scan Network
e Use uio p to input password, then select “OK” which
is at the end of the character table. For how to input,
check next page.
[a]:

Confirm “Success” on
Use iOS Device
the display and press
e Follow the instructions and tap Next.
SETUP on the remote to
Marantz NR1200 CEOL NR1200
exit the menu.

Success
WPS Router
e Use o p to select Connect, then press ENTER
within 2 minutes. Wi-Fi
Connected !
Push WPS: Connect

Manual
r Use ui to select “Password” and press ENTER, input t Use ui to select “Connect”, then
password, then select “OK” which is at the end of the press ENTER.
character table.

Connect

17

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 17 2019/06/21 9:36:04
 The display of inputting characters and how to input
The display is showed as below when the input of SSID or password is required.

[a]:Abc q Shows a current selected character.

w Shows current input text.
q w
22How to input
The characters are arranged as shown in the below tables. The Upper case / Lower case is switched by selecting [a/A].
1) Use uio p to select the character to be input.
2) Press ENTER to input the selected character.

Lower case characters Upper case characters

Clear Insert Delete Clear Insert Delete
a b c d e f g h i j k l m A B C D E F G H I J K L M
n o p q r s t u v w x y z N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 . @ - 0 1 2 3 4 5 6 7 8 9 ! " #
_ / : ~ ? [ ] ^ ` { | } $ % & ' ( ) * + , ; < = >
a/A Space Cancel OK a/A Space Cancel OK

Example q Press i four times. w Press ENTER.  ress u four times.

eP r Press ENTER.
Input the “A”. [a] is changed to [a/A]. Character table is [a/A] is changed to “A” is input.
switched. [A].

[a]: [a/A]: [a/A]: [A]: [A]:A

18

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 18 2019/06/21 9:36:05
 2-2 Setup without connecting to TV
9) Network Control Setting 9.2) Use ui to select “Network”, then
Setting the Network Control to on enabled to control press ENTER.
your receiver using smartphone apps, home automation
system, Apple AirPlay or Amazon Alexa voice service.

9.1) Press SETUP on the remote 9.3) Use ui to select “Network

control. Control”, then press ENTER.

You can see the following on the display.

19

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 19 2019/06/21 9:36:05
 9.4) Press ENTER, then use o p to set
the Network Control setting, after
Select “NetCtrl” (Network Control) to “Always” to
that press ENTER again. control your receiver from your smartphone, use
Bluetooth/Apple AirPlay/HEOS App/Amazon Alexa
voice service and maintain constant network access.
Power consumption during standby power will be
Select “NetCtrl” (Network Control) to “Off” to slightly higher.
reduce the power consumption during standby. You
can not turn on your receiver from your smartphone
or use Bluetooth/Apple AirPlay/HEOS App/Amazon
9.5) Press SETUP to exit the setup
Alexa until your receiver is powered on manually and menu.
connects to your network.

20

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 20 2019/06/21 9:36:05
 3 Downloading the Mobile Apps
Download both the “HEOS” App and the “Marantz 2016 AVR Remote” App for the full home entertainment experience.
The HEOS App is required to access online music through your AVR.

HEOS
Marantz 2016 AVR Remote
The HEOS App allows you to explore, Control your new AVR with the latest
browse, and play music from many online Marantz 2016 AVR Remote App. Volume
streaming services or from your own music control, sound mode selection and
library. advanced settings are always only a tap
away.

21

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 21 2019/06/21 9:36:05
 Owner’s Manual
• For more information, visit www.marantz.com
• Refer to the Online Manual for other functions
information and operation procedure details.
manuals.marantz.com/NR1200/EU/EN/

Online Manual

22

Printing Color : Black

1. NR1200N_QSG_ENG_00A_190621.indd 22 2019/06/21 9:36:05
 Printed in Vietnam 5411 11721 00AM
Copyright © 2019 D&M Holdings Inc. All Rights Reserved.

Printing Color : Black

10. NR1200N_QSG_BackPage_00A.indd 1 2019/06/21 9:59:45