Standard Equipment

ENGINE CAB & CONTROL

 Engine, HINO J05E-TI, Diesel engine with turbocharger and  Two control levers, pilot-operated
intercooler  Horn, electric
 Automatic engine deceleration  Integrated left-right slide-type control box
 Batteries (2 x 12V - 96Ah)  Cab, all-weather sound suppressed type Hydraulic Excavators
 Starting motor (24V - 5 kW), 50 amp alternator  Ashtray
 Removable clean-out screen for radiator  Cigarette lighter Bucket Capacity :
 Automatic engine shut-down for low engine oil pressure  Cab light (interior)
 Engine oil pan drain cock  Coat hook 1.05 - 1.83 cu.yd. SAE
 Double element air cleaner  Luggage tray
 Large cup holder
 Detachable two-piece floor mat Engine Power :
CONTROL
 7-way adjustable suspension seat
 Working mode selector (H-mode, S-mode and ECO-mode)  Retractable seatbelt 176 hp {131 kW} / 2,100 rpm {min-1}
 Heavy Lift and Power Boost “without time limit”  Headrest (ISO9249)
 Handrails
SWING SYSTEM & TRAVEL SYSTEM  Heater and defroster Operating Weight :
 Swing rebound prevention system  Intermittent windshield wiper with double-spray washer
 Straight propel system  Skylight 56,890 lbs {25,800 kg}
 Two-speed travel with automatic shift down  Top guard
 Sealed & lubricated track links  Tinted safety glass
 Grease-type track adjusters  Pull-type front window and removable lower front window
 Automatic swing brake  Easy-to-read multi-display monitor
 Automatic air conditioner
 Emergency escape hammer
HYDRAULIC  Radio, AM/FM Stereo with speakers
 Arm regeneration system  Travel alarm
 Auto warm up system  Drain pressure switch
 Aluminum hydraulic oil cooler  DPF regeneration switch

MIRRORS & LIGHTS

 Three rearview mirrors and rearview camera
 Two front working lights
 Swing flashers

Optional Equipment
 Wide range of shoes  Front-guard protective structures
 Boom safety valve  Additional hydraulic circuit
 Arm safety valve  Control pattern changer (2-way)

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with
specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN
Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135
www.kobelco-kenki.co.jp/english_index.html
Complies with the latest exhaust emission regulations

US EU (NRMM) Japanese
EPA Tier IV Stage IIIB Regulations
Bulletin No. SK260LC-9-NA-101
2013030000E Printed in USA
 The Power Wave E nhancement
Greater Performance Capacity
- Reduced fuel consumption with highly efficient productivity
- New environmental engine with superior fuel efficiency and

of Change
low fuel consumption hydraulic circuitry
- Powerful arm bucket digging strength and wide digging range

E conomy
Improved Cost Efficiency
- Adoption of new "ECO-Mode" greatly reduces

E
fuel consumption
- Easy maintenance that reduces upkeep costs
Introducing a new generation of hydraulic excavators that provide the three E's:
Enhancement, Economy and Environment!
nvironment - High structural durability and reliability that
retain machine value longer

Features That Go Easy on the Earth

The refining of each of these "E's", together with the introduction of leading-edge technology - Compliance with US EPA Tier IV regulations
- Low-noise and low vibration including improvements
that complies with US EPA Tier 4 emission standards provides excavators with even more to sound quality

enhanced environmental performance and fuel efficiency, as well as unparalleled work

performance.
The incredible work rate of these excavators is provided by powerful digging strength and
a wide digging range. These excavators feature a new engine model with reduced
environmental impact and Kobelco's unique technology that reduces pressure-loss
resistance.
Kobelco's reliable and well-tested technology has been developed over many
years, making it more than capable of satisfying the various demands of
today's construction industry.
Continuously creating original value, Kobelco has been able to bring
technical marvels into existence through a spirit of perpetual pursuit.

Fuel Consumption Digging Volume

PM Reduction per
Rate Liter of Fuel
(Comparison with Previous Model
Rate (Comparison with Previous Model

- 15 % - 88% + 14 %
in S-Mode/Eco-Mode) in S-Mode/Eco-Mode)

about about about

1 2
 More Work
Energy Saving System
Digging Volume
per Fuel Consumption
Hydraulic Circuit
Liter of Fuel
with Less Fuel !!
with Reduced Energy Loss
Rate
(Comparison with Previous Model (Comparison with Previous Model The KOBELCO original hydraulic circuit analysis is used to
in S-Mode/Eco-Mode) in S-Mode/Eco-Mode)

+ 14 % - 15 %
construct the hydraulic system with extremely reduced energy
loss that contains a piping design for small abrasion resistance
about and the minimum valve resistance.
about

H-Mode : + about 7%
ECO-Mode
Each Mode Reduces Fuel Consumption
S-Mode : + about 11%
(Comparison with Previous Model)

6
Top-Class Powerful Digging (SAE J 1179:1990)

Max. arm crowding force: 26,100 lbs {116kN} The ECO-mode is newly provided in this machine. The synergistic H H- Mode about %
effect with the engine, etc. makes this mode possible to Suitable for a heavy workload

28,600 lbs {127kN}

6%
Max. arm crowding force
significantly reduce fuel consumption. The each mode for each
S S - Mode
with power boost:
work and circumstance can be selected easily from the switch. about
Max. bucket digging force: 34,200 lbs {152kN} Suitable for a good balance
between workload and fuel consumption

37,500 lbs {167kN}

15
Max. arm crowding force NEW
with power boost:
E ECO - Mode about %
Suitable for a severe priority on low fuel consumption
at a light workload
New Eco-Friendly Engine

Newly Developed Engine

PM Reduction
Rate HINO engine establishes reputation on low fuel consumption and

- 88%
its environmental performance. This machine adopts HINO
engine and KOBELCO tunes it with the original method. The
about common knowledge of ecology will be changed by this new type
eco-friendly engine.

PM emissions cut: Limits creation of particulate matter NOx emissions cut: Reduces nitrogen oxides (created by
(which results from incomplete combustion of fuel) reaction with oxygen at high temperature)
Common rail system EGR cooler
High-pressure injection atomizes the fuel, and injection timing While ensuring sufficient oxygen for Air intake Exhaust
is more precise, improving combustion efficiency. combustion, cooled emission gases Water-cooled

Electronic control
are mixed with the air intake and EGR

EGR valve
VG turbo re-circulated into the engine. Then
The opening of the exhaust side nozzles in the variable-geometry Turbine blade the oxygen concentration is lowered
turbocharger adjusts air intake to maximize combustion efficiency. Variable nozzle
and the combustion temperature is
At low engine speeds the nozzles are closed, then the turbo lowered.
speed is increased and air intake is boosted.
This helps lower fuel consumption.

Diesel Particulate Filter (DPF)

Carbon is built up as soot on the diesel particulate filter and is
burned off at high temperature. At low engine speeds the
PM
PM PM

exhaust temperature is too low, and the common rail multiple PM

PM

injection system is then operated to raise the temperature Filter

Great Swing Power, sufficiently to burn off the soot. Platinum catalyzer

Short Cycle Times

Swing speed: The instantly understandable
Color Multi-Display analogue gauge for fuel level
10.2 rpm {10.2min-1} and engine coolant temperature.

The easy-to-read liquid crystal color

multi-display, which has vivid colors and The green lamp lights on at
the low fuel consumption
graphical indications, is provided at the new operation.
Powerful Travel type console. Not only the each machine Maintenance Fuel Camera
Information Consumption Display The display can be switched
information such as fuel consumption and Display Gauge Display to the fuel consumption /
Drawbar pulling force:
maintenance, but also the picture of the picture of rearward visibility

54,900 lbs {244kN} rearward visibility monitoring camera is

monitoring camera display.

appeared on the display. Each switch such as the

Attachment Mode Select Switch work mode select switch is
for Nibbler (Crusher) and Breaker Piping gathered here.

Photos in this catalog are the machine with the option installed. 4
 Comfortability
Wide-Access Cab Helps
Big Cab
Smooth Entry and Exit
The “Big cab” provides a roomy operating space with plenty of legroom, and Easy entry and exit assured with wider
the door opens wide for entry and exit. As well as giving a wide, open view cab entry and safety lock lever integrated
to the front, the cab has increased window areas on both sides and to the with mounting for control levers.
rear, for improved visibility in all directions.

Designed from
the Operator’s Point of View
Comfortable Operating Environment
The inside of the cab is fully equipped for operator comfort. For example,
the seat is comfortable when operating the machine and also when relaxing
in the cab. The large storage space is provided. All of them are designed
with operator comfort as the first priority in mind.

Excellent Visibility
Taking out the right-side cab support to make a single window has improved
visibility to the right.
Reclining seat Double slide seat
 Taking out the right-side cab support to make a single window has improved
wide visibility.
 The view is not obstructed by the provided rise up wiper when the wiper is not used.
 Safety check is easy with the left and right rearview mirrors, right lower mirror,
and rearward visibility monitoring camera. Powerful automatic Two-speaker Large cup holder Spacious luggage
 The tempered green glass complied with European Standards is adopted. air conditioner FM/AM radio tray
with station select

Safety

ROPS Cab Rear View Camera

The newly developed, ROPS (Roll- By the picture of the rearward visibility
Over -Protective Structure)-compliant monitoring camera, safety checks for
cab clears ISO standards(ISO-12117 rearward visibility can be carried out easily.
-2: 2008) and ensures greater safety for The camera is provided as a standard
the operator should the machine tip specification and the operation visibility is
over. complied with ISO standards. The picture
 FOPS guard
of it is appeared on the color multi-display.

Safety Features That Take Various

Scenarios into Consideration

 Firewall separates the  Swing flashers /  Hammer for emergency exit

pump compartment from rear working lights
the engine
 Hand rails are complied with European Standards
 Thermal guard prevents contact with hot components during engine inspections
 Level 2 FOPS Guard (ISO 10262) is equipped as standard.  Travel alarm
 To fit vandalism guards, please contact your KOBELCO dealer. (Mounting brackets for  Retractable seatbelt requires no manual adjustment
vandalism guards)
6
 The Value and Quality of
Sturdy Construction !

Attachment and Body Structure 500 Hours Cycle of Long-Life Hydraulic Oil Emergency Acceleration (Dial) Permits Continued
Designed for High Strength Attachment Lubrication Reduces Replacement Costs
Operation in the Unlikely Event of Malfunction
The forged and cast steel materials are applied to the attachment stress The self lubrication bushings are used at the The long-life hydraulic oil features a base oil with Long-life If unexpected trouble is experienced with the
concentration part on the arm and boom. This is one of the securing high attachment pins and the bushings with high excellent demulsification, with optimized wear hydraulic oil
ITCS mechatronic control system, the
stress measures applied to this machine in various ways. Also the body abrasion resistant property are used at the -resistant additives and antioxidants that help to boost 5,000 machine can still be operated using the
structure such as the bottom of the upper frame and the side deck are pins around the bucket. The lubrication cycle the service life to 5,000 hours and greatly reduce the hours emergency acceleration system. Digging
designed for high strength to secure reliable high durability. of the lubrication points around the bucket is number of changes necessary. modes are also automatically relayed to an
250 hours and that of other lubrication points emergency system so that digging can
is 500 hours. continue temporarily until a service person
Quality of Durability Highly Durable Super-fine Filter arrives to repair the primary system.

Engine throttle
The high quality urethane paint is applied New-Design Fuel Filter Catches The high-capacity hydraulic oil filter incorporates
Mechatronic
to the machine body to keep the machine 95% of Dust and Impurities glass fiber with superior cleaning power and controller Engine
body beautiful for a long time. The bolt up durability. With a replacement cycle of 1,000 hours Pump
The large-capacity fuel filter is designed
handrail is attached to the cab for an easy and a construction that allows replacement of the filter
specifically for common rail engines. With an Engine ECU
repair and the high durability surface element only, it is both highly effective and highly Emergency acceleration
increased filtering performance to 2-micron
material is used on the operator’ s seat economical.
precision, this high-grade filter catches 95% Super-fine filter Newly designed MCU
inside the cab.
of all dust particles and other impurities in the
 Vertical alignment and sealed cover
fuel. gives better protection from water and
Double-Element dust
Air Cleaner as Standard  Integration in base plate boosts
The large-capacity element features a assembly quality

double-filter structure that keeps the engine  Reliable fixture to base plate
New MCU Conventional
MCU
running clean even in dusty environments.
Countermeasures Against Electrical System Failure
All elements of the electrical system, including controller, have been
designed for enhanced reliability.

7 8
 Machine Information Display Function
Is Essential for Accurate Maintenance
 When necessary, only the maintenance required item is displayed by the

Fast, Accurate and

maintenance information display function.
 Malfunction at the electrical system is detected and displayed in the early stage Engine Oil Exchange
by the self-diagnostic function. Fuel Filter Exchange

Low-Cost Maintenance
 The machine condition can be easily checked by the service diagnosis function. Hydraulic Oil Filter Exchange
 Malfunction including irregular and transient one can be checked by the trouble Hydraulic Oil Exchange
history record function.

Maintenance from the Ground

with Comfortable Working Posture Safety Maintenance from the Machine
The components and parts those are subjected to be checked in daily inspection The steps to the machine upper surface become three steps and the
and periodic maintenance are provided at the accessible positions from the handrail complied with ISO standards is adopted. These are provided for
ground. This machine is designed with easy inspection and maintenance in mind. safety maintenance from the machine.

Air Cleaner Fuel Filter Engine Oil Filter Handrails Three Steps
(double element) (with built-in water
separator)

Easy-to-Access Inside Cab Easy-to-Clean Parts

Helps Easy Inspection Shorten the Cleaning Time

Fuse Box DPF Manual Regeneration Switch Crawler Frame Floor Mat

Hour Meter Air Conditioner Filter Fuel Drain Valve

Total Support for Machines with Network Speed and Accuracy

Our "Machine Operation Management System" allows you to use the Internet to manage information from your office for machines operating in all areas.
Be prepared for any problems with strategic information and cost management. This provides a wide range of support for your business operations.

Direct Access to Operational Status GPS

Maintenance Data and Warning Alerts

Location Data Machine Maintenance Data

Accurate location data can be obtained even from sites Provides maintenance status of separate
where communications are difficult. machines operating at multiple sites.
Maintenance data is also relayed to KOBELCO
Operating Hours
service personnel, for more efficient planning
A comparison of operating times of machines at multiple of periodic servicing.
locations shows which locations are busier and more profitable. Base station
Operating hours on site can be accurately recorded, for running
time calculations needed for rental machines, etc. Hydraulic excavator
Security System
Fuel Consumption Data
Data on fuel consumption and idling times can be used to Engine Start Alarm
indicate improvements in fuel consumption. The system can be set an alarm if the machine
Web server
is operated outside the designated time.
Graph of Work Content
The graph shows how working hours are divided among Area Alarm
different operating categories, including digging, idling, KOBELCO service personnel/dealer/customer It can be set an alarm if the machine is moved
traveling, and optional operations (N&B). out of its designated area to another location.

10
 Engine Travel System Working Ranges Unit: ft-in{m} a
Model HINO J05E-TI Travel motors: 2 x axial-piston, two-step motors Boom 19'9" {6.02 m} b
Direct injection, water-cooled, 4-cycle diesel Travel brakes: Hydraulic disc brake Arm Short Standard Long h
engine with turbocharger, intercooler Range 8'2" {2.5 m} 9'9" {2.98 m} 12'0" {3.66 m}
Parking brakes: Oil disc brake per motor
Type: (Complies with EU (NRMM) Stage IIIB, EPA a- Max. digging reach 32'5" {9.89} 33'10" {10.31} 36'0" {10.98}
Travel shoes: 51 each side 11 m
Tier IV, and act on regulation, etc. of emission
b- Max. digging reach 10
from non- road special motor vehicles (Japan)) Travel speed: 3.6 / 2.2 mph {5.8 / 3.6 km/h} 31'11" {9.72} 33'3" {10.14} 35'6" {10.82}
at groun level 9
No. of cylinders: 4 Drawbar pulling force: 54,900 lbs {244 kN} (SAE J 1309) 21'5" {6.52} 23'0" {7.00} 25'2" {7.68}
c- Max. digging depth 8
Bore and stroke: 4.41" (112 mm) x 5.12" (130 mm) Gradeability: 70 % {35°} d- Max. digging height 31'8" {9.65} 32'2" {9.80} 33'6" {10.22} 7
Displacement: 312.6 cu. in (5.123L) Ground clearance: 18.1" (460 mm) e- Max. dumping clearance 22'1" {6.72} 22'7" {6.88} 23'11" {7.28} 6
184 hp {137 kW} / 2,100 rpm {min } (ISO 14396)
-1
f - Min. dumping clearance 9'11" {3.03} 8'4" {2.55} 6'2" {1.87} d 5
Rated power output: 4
176 hp {131 kW} / 2,100 rpm {min } (ISO 9249)
-1 g- Max. vertical wall e
Cab & Control digging depth 19'1" {5.82} 20'2" {6.15} 22'10" {6.97} 3
482 lb-ft {654 N.m} / 1,600 rpm {min-1} (ISO 14396) 2
Max. torque: Cab h- Min. swing radius 12'10" {3.91} 12'10" {3.91} 12'10" {3.92} f
468 lb-ft {635 N.m} / 1,600 rpm {min-1} (ISO 9249) 1
All-weather, sound-suppressed steel cab mounted on the silicon-sealed i - Horizontal digging stroke
at ground level 13'9" {4.20} 17'3" {5.26} 21'3" {6.48} 0
viscous mounts and equipped with a heavy, insulated floor mat.
j - Digging depth for 8 feet i 1
Hydraulic System Control flat bottom
20'9" {6.32} 22'5" {6.82} 24'9" {7.54} 2
Pump Two hand levers and two foot pedals for travel 1.57 {1.20} 1.31 {1.00} 1.05 {0.80} g 3
Bucket capacity SAE heaped cu.yd.{m3} c j
Two variable displacement pumps + Two hand levers for excavating and swing 4
Type:
1 gear pump 5
Electric rotary-type engine throttle Digging Force Unit: lbs {kN}
2 x 65.0 U.S.gph {2 x 246 L/min}, 6
Max. discharge flow: Short Standard Long
1 x 5.3 U.S.gph {1 x 20 L/min} Arm length 7
8'2" {2.5 m} 9'9" {2.98 m} 12'0" {3.66 m}
Relief valve setting Boom, Arm & Bucket 8m
34,200 {152} 34,200 {152} 34,200 {152} 12m 11 10 9 8 7 6 5 4 3 2 1
Boom, arm and bucket: 4,970 psi {34.3 Mpa} SAE
37,500 {167}* 37,500 {167}* 37,500 {167}*
Boom cylinder: 5.3" {135 mm} x 4'1" {1,235 mm} Bucket digging force
Power Boost: 5,480 psi {37.8 Mpa} 38,200 {170} 38,200 {170} 38,200 {170}
Arm cylinder: 5.7" {145 mm} x 5'4" {1,635 mm} ISO
Travel circuit: 4,970 psi {34.3 Mpa} 42,000 {187}* 42,000 {187}* 42,000 {187}* 8'2" {2.5 m} Short Arm
Bucket cylinder: 4.9" {125 mm} x 3'11" {1,200 mm} 30,800 {137} 26,100 {116} 22,700 {101}
Swing circuit: 3,920 psi {27.0 Mpa} SAE 9'9" {2.98 m} Standard Arm
33,900 {151}* 28,600 {127}* -
Control circuit: 725 psi {5.0 Mpa} Arm crowding force 12'0" {3.66 m} Long Arm
31,900 {142} 27,400 {122} 23,400 {104}
ISO
Pilot control pump: Gear type 35,100 {156}* 30,100 {134}* -
Refilling Capacities & Lubrications * Power Boost engaged.
Main control valves: 8-spool
Fuel tank: 121.5 U.S.gal {460L}
Oil cooler: Air cooled type
Cooling system: 5.3 U.S.gal {20L} Dimensions Unit: ft-in {mm}
Engine oil: 5.5 U.S.gal {21L} Short Standard Long G Tail swing radius 10'2" {3,100}
Arm length
Swing System Travel reduction gear: 2 x 1.3 U.S.gal {2 x 5.0 L} 8'2" {2.5 m} 9'9" {2.98 m} 12'0" {3.66 m}
G’ Distance from center of swing to rear end 10'1" {3,070}
Swing reduction gear: A Overall length 33'8" {10,270} 33'6" {10,220} 33'7" {10230}
Swing motor: Axial piston motor 1.8 U.S.gal {7.0 L} H Tumbler distance 12'8" {3,850}
B Overall heigth (to top of boom) 10'12" {3,350} 10'5" {3,180} 10'10" {3300}
Hydraulic; locking automatically when the 44.9 U.S.gal {170 L} tank oil level I Overall length of crawler 15'3" {4,640}
Brake: Hydraulic oil tank: C Overall width 11'1" {3,390}
swing Control lever is in neutral position 74.0 U.S.gal {280 L} hydraulic system J Track gauge 8'6" {2,590}
D Overall height (to top of cab) 10'2" {3,100}
Parking brake: Hydraulic disc brake K Shoe width 23.6" {600} / 27.6" {700} / 31.5" {800}
E Ground clearance of rear end* 3'7" {1,090}
Swing speed: 10.2 rpm {min-1} L Overall width of upperstructure 9'9" {2,980}
F Ground clearance* 18.1" {460}
Tail swing radius: 10'3" {3,120 mm} * Without including height of shoe lug

Min. front swing radius: 12'10" {3,910 mm} A L

G, G’

Attachments
Backhoe bucket and arm combination

Backhoe bucket B D

Use
E
F
K J
H
SAE heaped cu.yd.{m3} 1.05 {0.80} 1.31 {1.00} 1.57 {1.20} 1.83 {1.40} I C
Bucket capacity
SAE Struck cu.yd.{m3} 0.77 {0.59} 0.99 {0.76} 1.10 {0.84} 1.31 {1.00}
With side cutter inches {mm} 42 {1,060} 50 {1,270} 57 {1,440} -
Opening width Operating Weight & Ground Pressure
Without side cutter inches {mm} 38 {960} 46 {1,180} 53 {1,340} 59 {1,510} In standard trim, with standard boom, 9'9" {2.89m} arm, and 1.31 cu.yd. {1.00 m3} SAE heaped bucket
No. of bucket teeth 4 5 5 6
Shaped Triple grouser shoes (even height)
Bucket weight lbs {kg} 1,540 {700} 1,790 {810} 1,870 {850} 1,960 {890}
Shoe width ft-in{mm} 23.6" {600} 27.6" {700} 31.5" {800}
8'2" {2.5 m} short arm Overall width of crawler ft-in{mm} 10'6" {3,190} 10'10" {3,290} 11'1" {3,390}
Combinations 9'9" {2.98 m} standard arm Ground pressure psi {kPa} 7.3 {50} 6.4 {44} 5.5 {38}
12'0" {3.66 m} long arm Operating weight lbs {kg} 56,230 {25,500} 56,450 {25,600} 56,890 {25,800}
Standard Recommended Loading only Not recommended

11 12
 Lifting Capacities

A – Reach from swing centerline for bucket hook

Rating over front
B – Bucket hook height above/below ground
Rating over side or 360 degrees C – Lifting capacities in kilograms

SK260LC Standard Arm: 9'9" {2.98 m} Bucket: 1.31cu yd {1.00 m3} SAE heaped 1,790 lbs {810 kg} Shoe: 31'5" {800 mm} SK260LC Long Arm: 12'0" {3.66 m} Bucket: 1.05cu yd {0.80m3} SAE heaped 1,540 lbs {700 kg} Shoe: 31'5" {800mm}
A 5' {1.5m} 10' {3.0m} 15' {4.6m} 20' {6.1m} 25' {7.6m} At Max. Reach A 5' {1.5m} 10' {3.0m} 15' {4.6m} 20' {6.1m} 25' {7.6m} 30' {9.1m} At Max. Reach
Radius Radius
B B
25' {7.6m} lb{kg} *6,780 {3,070} *6,780 {3,070} 22'8" {6.91m} 25' {7.6m} lb{kg} *5,890 {2,670} *5,890 {2,670} *4,930 {2,230} *4,930 {2,230} 25'7" {7.81m}
20' {6.1m} lb{kg} *8,690 {3,940} *8,690 {3,940} *6,490 {2,940} *6,490 {2,940} 26'1" {7.95m} 20' {6.1m} lb{kg} *7,990 {3,620} *7,990 {3,620} *4,690 {2,120} *4,690 {2,120} 28'8" {8.74m}
15' {4.6m} lb{kg} *10,530 {4,770} *10,530 {4,770} *9,890 {4,480} *9,890 {4,480} *6,560 {2,970} *6,560 {2,970} 28'2" {8.60m} 15' {4.6m} lb{kg} *8,740 {3,960} *8,740 {3,960} *5,970 {2,700} *5,970 {2,700} *4,680 {2,120} *4,680 {2,120} 30'7" {9.33m}
10' {3.0m} lb{kg} *26,980 {12,230} *26,980 {12,230} *16,490 {7,470} *16,490 {7,470} *12,780 {5,790} *12,780 {5,790} *11,020 {4,990} 9,510 {4,310} *6,920 {3,130} *6,920 {3,130} 29'4" {8.94m} 10' {3.0m} lb{kg} *13,990 {6,340} *13,990 {6,340} *11,320 {5,130} *11,320 {5,130} *9,990 {4,530} *9,740 {4,410} *8,230 {3,730} 7,020 {3,180} *4,870 {2,200} *4,870 {2,200} 31'8" {9.65m}
5' {1.5m} lb{kg} *13,480 {6,110} *13,480 {6,110} *21,090 {9,560} 19,960 {9,050} *15,160 {6,870} 12,890 {5,840} *12,320 {5,580} 9,070 {4,110} *7,610 {3,450} 6,840 {3,100} 29'7" {9.02m} 5' {1.5m} lb{kg} *21,780 {9,870} *21,780 {9,870} *18,970 {8,600} *18,970 {8,600} *13,900 {6,300} 13,170 {5,970} *11,430 {5,180} 9,220 {4,180} *9,700 {4,390} 6,760 {3,060} *5,270 {2,390} *5,270 {2,390} 31'10" {9.72m}
G.L. lb{kg} *16,830 {7,630} *16,830 {7,630} *24,030 {10,890} 18,900 {8,570} *17,050 {7,730} 12,250 {5,550} *13,420 {6,080} 8,720 {3,950} *8,790 {3,980} 6,920 {3,130} 28'11" {8.83m} G.L. lb{kg} *7,000 {3,170} *7,000 {3,170} *18,000 {8,160} *18,000 {8,160} *22,680 {10,280} *19,160 {8,690} *16,120 {7,310} 12,390 {5,620} *12,760 {5,780} 8,790 {3,980} *9,910 {4,490} 6,530 {2,960} *5,950 {2,690} *5,950 {2,690} 31'3" {9.54m}
-5' {-1.5m} lb{kg} *15,870 {7,190} *15,870 {7,190} *24,630 {11,170} *24,630 {11,170} *25,080 {11,370} 18,510 {8,390} *18,030 {8,170} 11,930 {5,410} 13,660 {6,190} 8,540 {3,870} *10,850 {4,920} 7,450 {3,370} 27'5" {8.36m} -5' {-1.5m} lb{kg} *13,380 {6,060} *13,380 {6,060} *22,530 {10,210} *22,530 {10,210} *24,570 {11,140} *18,500 {8,390} *17,540 {7,950} 11,930 {5,410} *13,650 {6,190} 8,510 {3,860} *7,090 {3,210} *7,090 {3,210} 29'10" {9.11m}
-10' {-3.0m} lb{kg} *24,380 {11,050} *24,380 {11,050} *35,310 {16,010} *35,310 {16,010} *24,450 {11,090} 18,590 {8,430} *17,830 {8,080} 11,930 {5,410} *13,640 {6,180} 8,740 {3,960} 24'9" {7.55m} -10' {-3.0m} lb{kg} *20,110 {9,120} *20,110 {9,120} *30,230 {13,710} *30,230 {13,710} *24,760 {11,230} 18,370 {8,330} *17,920 {8,120} 11,780 {5,340} 13,580 {6,150} 8,440 {3,820} *9,140 {4,140} *9,140 {4,140} 27'6" {8.38m}
-15' {-4.6m} lb{kg} *31,500 {14,280} *31,500 {14,280} *21,770 {9,870} 19,080 {8,650} *15,630 {7,080} 12,300 {5,570} *14,970 {6,790} 11,800 {5,350} 20'7" {6.28m} -15' {-4.6m} lb{kg} *28,170 {12,770} *28,170 {12,770} *34,320 {15,560} *34,320 {15,560} *23,130 {10,490} 18,670 {8,460} *16,810 {7,620} 11,970 {5,420} *13,250 {6,010} *13,250 {6,010} 23'9" {7.26m}
-20' {-6.1m} lb{kg} *27,190 {12,330} *27,190 {12,330} *18,540 {8,400} *18,540 {8,400} *14,640 {6,640} *14,640 {6,640} 18'1" {5.51m}

SK260LC Standard Arm: 9'9" {2.98 m} Bucket: 1.31cu yd {1.00 m } SAE heaped 1,790 lbs {810 kg} Shoe: 31'5" {800 mm}
3
HEAVY LIFT SK260LC Long Arm: 12'0" {3.66 m} Bucket: 1.05cu yd {0.80m } SAE heaped 1,540 lbs {700 kg} Shoe: 31'5" {800mm}
3
HEAVY LIFT
A 5' {1.5m} 10' {3.0m} 15' {4.6m} 20' {6.1m} 25' {7.6m} At Max. Reach A 5' {1.5m} 10' {3.0m} 15' {4.6m} 20' {6.1m} 25' {7.6m} 30' {9.1m} At Max. Reach
Radius Radius
B B
25' {7.6m} lb{kg} *7,670 {3,470} *7,670 {3,470} 22'8" {6.91m} 25' {7.6m} lb{kg} *6,710 {3,040} *6,710 {3,040} *5,650 {2,560} *5,650 {2,560} 25'7" {7.81m}
20' {6.1m} lb{kg} *9,780 {4,430} *9,780 {4,430} *7,360 {3,330} *7,360 {3,330} 26'1" {7.95m} 20' {6.1m} lb{kg} *9,190 {4,160} *9,190 {4,160} *5,390 {2,440} *5,390 {2,440} 28'8" {8.74m}
15' {4.6m} lb{kg} *12,010 {5,440} *12,010 {5,440} *11,330 {5,130} 9,920 {4,490} *7,440 {3,370} *7,440 {3,370} 28'2" {8.60m} 15' {4.6m} lb{kg} *10,050 {4,550} *10,050 {4,550} *6,810 {3,080} *6,810 {3,080} *5,380 {2,440} *5,380 {2,440} 30'7" {9.33m}
10' {3.0m} lb{kg} *30,450 {13,810} *30,450 {13,810} *18,710 {8,480} *18,710 {8,480} *14,570 {6,600} 13,740 {6,230} *12,620 {5,720} 9,510 {4,310} *7,840 {3,550} 7,160 {3,240} 29'4" {8.94m} 10' {3.0m} lb{kg} *15,900 {7,210} *15,900 {7,210} *12,930 {5,860} *12,930 {5,860} *11,460 {5,190} 9,740 {4,410} *9,290 {4,210} 7,020 {3,180} *5,600 {2,540} *5,600 {2,540} 31'8" {9.65m}
5' {1.5m} lb{kg} *15,040 {6,820} *15,040 {6,820} *23,910 {10,840} 19,960 {9,050} *17,270 {7,830} 12,890 {5,840} *14,090 {6,390} 9,070 {4,110} *8,610 {3,900} 6,840 {3,100} 29'7" {9.02m} 5' {1.5m} lb{kg} *24,150 {10,950} *24,150 {10,950} *21,540 {9,770} 20,570 {9,330} *15,860 {7,190} 13,170 {5,970} *13,100 {5,940} 9,220 {4,180} 10,680 {4,840} 6,760 {3,060} *6,040 {2,730} *6,040 {2,730} 31'10" {9.72m}
G.L. lb{kg} *18,730 {8,490} *18,730 {8,490} *27,230 {12,350} 18,900 {8,570} *19,400 {8,790} 12,250 {5,550} 13,860 {6,280} 8,720 {3,950} *9,910 {4,490} 6,920 {3,130} 28'11" {8.83m} G.L. lb{kg} *7,930 {3,590} *7,930 {3,590} *20,010 {9,070} *20,010 {9,070} *25,740 {11,670} 19,160 {8,690} *18,370 {8,330} 12,390 {5,620} 13,960 {6,330} 8,790 {3,980} 10,440 {4,730} 6,530 {2,960} *6,790 {3,070} *6,790 {3,070} 31'3" {9.54m}
-5' {-1.5m} lb{kg} *17,680 {8,010} *17,680 {8,010} *27,300 {12,380} *27,300 {12,380} *28,420 {12,890} 18,510 {8,390} 19,370 {8,780} 11,930 {5,410} 13,660 {6,190} 8,540 {3,870} 11,890 {5,390} 7,450 {3,370} 27'5" {8.36m} -5' {-1.5m} lb{kg} *14,950 {6,780} *14,950 {6,780} *24,990 {11,330} *24,990 {11,330} *27,870 {12,640} 18,500 {8,390} 19,400 {8,790} 11,930 {5,410} 13,650 {6,190} 8,510 {3,860} *8,050 {3,650} *8,050 {3,650} 29'10" {9.11m}
-10' {-3.0m} lb{kg} *27,040 {12,260} *27,040 {12,260} *39,040 {17,700} 37,860 {17,170} *27,720 {12,570} 18,590 {8,430} 19,360 {8,780} 11,930 {5,410} 13,930 {6,310} 8,740 {3,960} 24'9" {7.55m} -10' {-3.0m} lb{kg} *22,340 {10,130} *22,340 {10,130} *33,450 {15,170} *33,450 {15,170} *28,090 {12,740} 18,370 {8,330} 19,230 {8,720} 11,780 {5,340} 13,580 {6,150} 8,440 {3,820} *10,320 {4,680} *10,320 {4,680} 27'6" {8.38m}
-15' {-4.6m} lb{kg} *35,680 {16,180} *35,680 {16,180} *24,730 {11,210} 19,080 {8,650} *17,830 {8,080} 12,300 {5,570} *17,090 {7,750} 11,800 {5,350} 20'7" {6.28m} -15' {-4.6m} lb{kg} *31,200 {14,150} *31,200 {14,150} *38,860 {17,620} 38,060 {17,260} *26,270 {11,910} 18,670 {8,460} *19,170 {8,690} 11,970 {5,420} 14,890 {6,750} 14,890 {6,750} 23'9" {7.26m}
-20' {-6.1m} lb{kg} *30,910 {14,020} *30,910 {14,020} *21,160 {9,590} 19,480 {8,830} *16,770 {7,600} *16,770 {7,600} 18'1" {5.51m}

SK260LC Short Arm: 8'2" {2.5 m} Bucket: 1.57cu yd {1.20 m3} SAE heaped 1,870lbs {850 kg} Shoe: 31'5" {800 mm} Notes:
A 5'{1.5m} 10'{3.0m} 15'{4.6m} 20'{6.1m} 25'{7.6m} At Max. Reach 1. Do not attempt to lift or hold any load that is greater than these lift capacities at their 4. The above lifting capacities are in compliance with SAE J/ISO 10567. They do
Radius specified lift point radius and heights. Weight of all accessories must be deducted not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load. Lifting
from the above lift capacities. capacities marked with an asterisk (*) are limited by hydraulic capacity rather
B
2. Lift capacities are based on machine standing on level, firm, and uniform ground. than tipping load.
25' {7.6m} lb{kg} *9,980 {4,520} *9,980 {4,520} *9,680 {4,390} *9,680 {4,390} 20'10" {6.35m}
User must make allowance for job conditions such as soft or uneven ground, out of 5. Operator should be fully acquainted with the Operator’s and Maintenance
20' {6.1m} lb{kg} *10,160 {4,600} *10,160 {4,600} *9,280 {4,200} *9,280 {4,200} 24'6" {7.47m} level conditions, side loads, sudden stopping of loads, hazardous conditions, Instructions before operating this machine. Rules for safe operation of
15' {4.6m} lb{kg} *11,610 {5,260} *11,610 {5,260} *10,750 {4,870} 9,860 {4,470} *9,400 {4,260} *9,400 {4,260} 26'9" {8.16m} experience of personnel, etc. equipment should be adhered to at all times.
10' {3.0m} lb{kg} *18,160 {8,230} *18,160 {8,230} *13,770 {6,240} 13,640 {6,180} *11,770 {5,330} 9,500 {4,300} *9,950 {4,510} *9,950 {4,510} 27'11" {8.52m} 3. Bucket lift hook is defined as lift point. 6. Lift capacities apply to only machines as originally manufactured and normally
equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
5' {1.5m} lb{kg} *22,400 {10,160} 19,740 {8,950} *15,980 {7,240} 12,860 {5,830} *12,930 {5,860} 9,110 {4,130} *10,990 {4,980} *10,990 {4,980} 28'2" {8.60m}
G.L. lb{kg} *14,580 {6,610} *14,580 {6,610} *24,730 {11,210} 18,910 {8,570} *17,610 {7,980} 12,310 {5,580} *13,850 {6,280} 8,820 {4,000} 12,030 {5,450} 12,030 {5,450} 27'6" {8.40m} Working Ranges (Long range attachment) Unit: ft-in{m} a
-5' {-1.5m} lb{kg} *17,150 {7,770} *17,150 {7,770} *25,960 {11,770} *25,960 {11,770} *25,190 {11,420} 18,700 {8,480} *18,260 {8,280} 12,090 {5,480} *13,860 {6,280} 8,710 {3,950} 13,140 {5,960} 13,140 {5,960} 25'11" {7.90m} b
Boom 33'11" {10.35 m}
-10' {-3.0m} lb{kg} *28,110 {12,750} *28,110 {12,750} *34,720 {15,740} *34,720 {15,740} *23,980 {10,870} 18,920 {8,580} *17,590 {7,970} 12,190 {5,520} *14,630 {6,630} *14,630 {6,630} 23'1" {7.05m} h
-15' {-4.6m}
Arm Long range attachment 15 m
lb{kg} *28,990 {13,140} *28,990 {13,140} *20,420 {9,260} 19,570 {8,870} *15,920 {7,220} *15,920 {7,220} 18'6" {5.66m} Range 27'1" {8.25 m} 14
13
12
a- Max. digging reach 60'10"{18.53} 11
10
9
SK260LC Short Arm: 8'2" {2.5 m} Bucket: 1.57 cu yd {1.20 m3} SAE heaped 1,870 lbs {850 kg} Shoe: 31'5" {800 mm} HEAVY LIFT b- Max. digging reachat groun level 60'6"{18.44} 8
d 7
A 5'{1.5m} 10'{3.0m} 15'{4.6m} 20'{6.1m} 25'{7.6m} At Max. Reach e 6
c- Max. digging depth 48'4"{14.73} 5
Radius 4

B d- Max. digging height 47'10"{14.59} 3

2

25' {7.6m} f 1
lb{kg} *11,360 {5,150} *11,360 {5,150} *10,850 {4,920} *10,850 {4,920} 20'10" {6.35m} e- Max. dumping clearance 40'5"{12.32} 0
1
20' {6.1m} lb{kg} *11,570 {5,240} *11,570 {5,240} *10,410 {4,720} *10,410 {4,720} 24'6" {7.47m} 2
f - Min. dumping clearance 5'2"{1.57} 3
15' {4.6m} lb{kg} *13,220 {5,990} *13,220 {5,990} *12,280 {5,570} 9,860 {4,470} *10,550 {4,780} *10,550 {4,780} 26'9" {8.16m} 4
5
10' {3.0m} lb{kg} *20,580 {9,330} *20,580 {9,330} *15,670 {7,100} 13,640 {6,180} *13,440 {6,090} 9,500 {4,300} *11,160 {5,060} *11,160 {5,060} 27'11" {8.52m} g- Max. vertical wall digging depth 40'5"{12.32} g 6
c j 7
8
5' {1.5m} lb{kg} *25,380 {11,510} 19,740 {8,950} *18,170 {8,240} 12,860 {5,830} 14,290 {6,480} 9,110 {4,130} 11,770 {5,330} 11,770 {5,330} 28'2" {8.60m} h- Min. swing radius 18'4"{5.60} 9
10
G.L. lb{kg} *16,240 {7,360} *16,240 {7,360} *28,010 {12,700} 18,910 {8,570} 19,810 {8,980} 12,310 {5,580} 13,970 {6,330} 8,820 {4,000} 12,030 {5,450} 12,030 {5,450} 27'6" {8.40m}
i - Horizontal digging stroke at ground level 48'5"{14.77} 11
12
-5' {-1.5m} lb{kg} *19,080 {8,650} *19,080 {8,650} *28,750 {13,040} *28,750 {13,040} *28,530 {12,940} 18,700 {8,480} 19,550 {8,860} 12,090 {5,480} 13,860 {6,280} 8,710 {3,950} 13,140 {5,960} 13,140 {5,960} 25'11" {7.90m} 13
j - Digging depth for 8 feet flat bottom 47'10"{14.58} 14
-10' {-3.0m} lb{kg} *31,130 {14,120} *31,130 {14,120} *39,250 {17,800} 38,530 {17,470} *27,190 {12,330} 18,920 {8,580} 19,660 {8,910} 12,190 {5,520} 15,770 {7,150} 15,770 {7,150} 23'1" {7.05m} 15 m
19181716151413121110 9 8 7 6 5 4 3 2 1
-15' {-4.6m} lb{kg} *32,880 {14,910} *32,880 {14,910} *23,220 {10,530} 19,570 {8,870} *18,150 {8,230} *18,150 {8,230} 18'6" {5.66m} Bucket capacity SAE heaped cu.yd. {m3} 0.52{0.40} m

13 14