Power Factor Correction Cylindrical

Power Factor Correction

Capacitor

Most Reliable
Components For
Power Factor Correction
And Energy Effeciency
Application
Suitable for a wide range of applications of Power
Factor Correction for compact APFC Control Panels,
Industries, Commercial Complexes, Hotels,
Hospitals, Shopping Malls, Agricultural Pumps,
Motors and Machineries.

TIBCON ADVANTAGE
Unique Features

• Compact Cylindrical Construction

• 3 Phase - Delta Connection

• Easy Banking

• Non-PCB Oil Encapsulation

• ECO-Friendly

• High Temperature Withstanding Capacity

• Self Healing Properties

• Explosion Proof Design

NCED
• Safe-Touch, Shock-Proof Terminals ENHA RGY
ENE NCY
IE
• Longer Life Expectancy EFFIC

Tibrewala Electronics Limited

Tibrewala Electronics Limited, Hyderabad, is one of India’s leading Capacitor manufacturer with ISO
9001-2008 certification. We are equipped with the latest and world class state-of-the-art
manufacturing plant.

IS:13340 & 13341

CM/L6098780 IEC 60831-1&2

© Reproduction, publication and dessimination of this technical literature and the contents therein 01
without TIBREWALA ELECTRONICS LTD. prior written permission is strictly prohibited
Power Factor Correction Cylindrical
Power Factor Correction
Capacitor

Energy Efficient Cylindrical

Power Factor Correction Capacitors
Design & Construction
Cylindrical shaped aluminum case with Metallized Poly propylene film
dielectric, having capacity of handling high power density in a compact
housing. Maximum reactive power can be housed in a compact
housing by a low loss factor and high utilization of the
dielectric. There are built-in self healing properties to increase the
longevity and reliability of the capacitor.
S S S

Explosion Proof Safety Device

Sometimes Capacitors may explode due to very high voltages in
repetitive peaks, which cannot be ‘self healed’ by the regenerative
property. Tibcon Capacitors are provided with an internal
Over-Pressure Diconnector, which disconnects the capacitor from the
power source and prevents it from exploding.
Aluminium Cylindrical Case Technical Specifications
• Standard IEC 60831-1 & 2, IS :13340
Ht

• Type MKP Cylindrical

• Rated Reactive Power 0.25 - 50 Kvar Single Unit
• Rated Voltage 230-525 Volts
• Rated Frequency 50/ 60 Hz
• Maximum Over Voltage U Max UN +10% 8 h in every 24 h
UN +15% 30min in every 24 h
UN + 20% 5 min in every 24 h
UN + 30% 1 min in every 24 h
• Dielectric System: Metallized Polypropylene Flim,Self-Healing
• Over Current 2xIn
• Losses 0.5 Watt/ Kvar
• Protection Class IP20
• Cooling Natural Air Cooled
• Max Above Sea Level 2,000 Mtrs.
Dia • Case: Aluminium Double Gripped Top Lid
• Discharge Resistor Special Design Internal Discharge
Resistance 50 V In Less Than 60 Sec
• Terminals Max 16 mm2 Cable With Arc Protection
Double Three Day Terminal
• Execution Indoor And Outdoor,
• Life Expectancy 100,000h Temp On 65°C
• Inrush Current 300xIn
• Tolerance On Capacitance ±5%
• Test Voltage Terminal To Terminal 2,15 UN, 10 Sec
• Test Voltage Terminal To Casing Un ≤ 660 V: 3000V AC 10 Sec.;
Un= 660 V :6000V AC 10 Sec
• Temperature Category -25°C / + 55°C
• Mounting Position Horizontally And Vertically
• Max Humidity 95%
• Grounding And Mounting With M12 Stud At The Bottom Of Case
• Protection Type Dry Type, Self-Healing,Over Pressure
Sensitive 3 Phase Disconnector
INTERNAL OVERPRESSURE • Impregnant Non PCB,Biodegradable Natural Oil Semi
DISCONNECTOR Soft Jelly

IS:13340 & 13341

CM/L6098780 IEC 60831-1&2

© Reproduction, publication and dessimination of this technical literature and the contents therein 02
without TIBREWALA ELECTRONICS LTD. prior written permission is strictly prohibited