0% found this document useful (0 votes)
45 views2 pages

Temperature Sensors - PPT - 3

The document describes temperature sensors for monitoring critical electrical assets. The sensors use surface acoustic wave technology, require no power, and can monitor up to 12 measurement locations. They are designed for low and medium voltage environments and have a long operational life.

Uploaded by

Javier
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
45 views2 pages

Temperature Sensors - PPT - 3

The document describes temperature sensors for monitoring critical electrical assets. The sensors use surface acoustic wave technology, require no power, and can monitor up to 12 measurement locations. They are designed for low and medium voltage environments and have a long operational life.

Uploaded by

Javier
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data Sheet

Critical Asset
Monitoring Temperature
Sensors
The IntelliSAW temperature sensors are the
ideal method for real-time, continuous
monitoring of low and medium voltage critical
asset hot-spots such as bus bars, breaker
contacts, and cables.

Surface acoustic wave (SAW) technology


enables a 100% wireless, passive (no power
required) continuous temperature monitoring
sensor. The SAW sensors were specifically
designed for electrical power assets with basic
insulation levels (BIL) up to 185kV.

Benefits

• 100% passive. No power source required


• Designed for electrical power critical asset
environments
• 20+ year operational expectancy
• Small, simple to fit existing asset structures
• Type tested for low and medium voltage
applications

Integrated Antenna (IS)

The Integrated Antenna SAW Sensors are the most


reliable method of thermal monitoring in a wide
range of electrical power critical asset
applications including switchgear, bus ties, bus
ducts, transformers, and generator circuit
breakers. The sensors seamlessly interface to all
IntelliSAW Critical Asset Monitoring systems and
provide up to twelve measurement locations per
asset.
Specifications Mechanical

Temperature Measurement
Range -25°C to +125°C
Resolution ± 0.2°C
Accuracy
Standard Range (0 to 80°C) ± 2°C
Full Range ± 4°C
Number of Sensor Channels 12 (non-overlapping channels)
Sensor Frequencies Between 425 MHz to 442 MHz

Physical
Base Plate Material 260 Brass, Tin Planted
Cover Material Polycarbonate, UL94-HB
Ingress Protection (IEC 60529) IP 30
Cover Dielectric Strength 15 kV
Dimensions 30.5 W × 53.5 L × 35.5 mm H

Mounting
Bolt (Max) 13 mm or ANSI ½ in.
102 N-m (75 lb-ft)
Use asset manufacturer’s recommended bolt
Mounting Torque (Max) torque at all times.
A high strength flat washer between the nut
and sensor must be used.
Cable Tie: 5.5 W × 1.65 mm Thick (Max)
Non-conducting ETFE, 150°C operating
Alternative Solutions temperature (McMaster-Carr 70215K93)
Bonding Tape: 3M VHB 4646 Bonding Tape (150°C
Operating temperature)

Type Testing

The product and the information contained herein may be changed at any time without prior notification. All rights reserved.
MV Switchgear, Voltage withstand: 95
IEC 62271-100
kV/1m, 185 kV pulse
MV Switchgear, Short circuit with
IEC 62271-200
stand: (63 kA/3s, 171 kA peak)

Sensor Groupings Model numbers

Sensors are grouped with unique color codes to support easy Not all model combinations are stocked.
installation and visualization in electrical power assets. Please contact sales before ordering.

SF - F
When commissioning a system, care must be taken not to duplicate
same sensor frequency bands within a given asset. IntelliSAW
recommends selecting sensors based on their groupings for optimal
performance. Please contact sales for more details.
Sensor Family (SF)
IS: Integrated Antenna SAW Sensor

Frequency Band (F)


COLOR SENSOR BANDS 01: Band 01
TEMPERATURE SENSORS[ENG] – REV.20210719

Orange 01, 03, 05 02: Band 02


03: Band 03
White 02, 04, 06 04: Band 04
Grey 07, 09, 11 05: Band 05
06: Band 06
Tan 08, 10, 12 07: Band 07
08: Band 08
09: Band 09
10: Band 10
11: Band 11
12: Band 12

Suitable For BUSBARS


BREAKER
CABLES
CONTACTS

TECHIMP - ALTANOVA GROUP ISA - ALTANOVA GROUP IntelliSAW - ALTANOVA GROUP


Via Toscana 11, Via Prati Bassi 22, 100 Burtt Rd
www.altanova-group.com 40069 Zola Predosa (Bo) - Italy 21020 Taino (Va) - Italy Andover, MA 01810 (USA)
T +39 051 199 86 050 T +39 0331 95 60 81 Phone +1 978-409-1534
Email [email protected] Email [email protected] Email [email protected]

You might also like