2020

ACCESSORY CATALOGUE
2

Safety Precautions
When using electric tools, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury, including the following.

/// KEEP WORK AREA CLEAN. /// DISCONNECT TOOLS.

Cluttered areas and benches invite injuries. When not in use, before servicing and when changing accessories such as
blades, bits and cutters.
/// CONSIDER WORK AREA ENVIRONMENT.
Don't use power tools in damp or wet locations. Keep work area well lit. /// REMOVE ADJUSTING KEYS AND WRENCHES.
Don't expose power tools to rain. Don't use power tool in presence of Form the habit of checking to see that keys and adjusting wrenches are
flammable liquids or gases. removed from the tool before turning it on.

/// KEEP CHILDREN AWAY. /// AVOID UNINTENTIONAL STARTING.

All visitors should be kept away from work area. Don't carry a plugged-in tool with a finger on the switch.
Don't let visitors touch the tool or extension cord. Ensure switch is OFF when plugging in.

/// STORE IDLE TOOLS. /// USE OUTDOOR EXTENSION CORDS.

When not in use, tools should be stored in a dry, high of locked up place, When tool is used outdoors, use only extension cords intended for outdoor
out of reach of children. use.

/// DON'T FORCE THE TOOL. /// STAY ALERT.

It will do the job better and safer at the rate for which it was intended. Watch what you are doing. Use common sense. Don't operate tool when you are
tired.
/// USE THE RIGHT TOOL.
Don't force small tools or attachments to do the job of a heavy-duty tool. /// CHECK DAMAGED PARTS.
Don't use tools for purposes not intended. Before further use of the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform its
/// DRESS PROPERLY. intended function. Check for alignment of moving parts, free running of
Don't wear loose clothing or jewelry. They can be caught in moving parts. moving parts, breakage of parts, mounting and any other conditions that may
Rubber gloves and non-skid footwear are recommended when working affect its operation. A guard or other part that is damaged should be properly
outdoors. Wear protective hair covering to contain long hair. repaired or replaced by an authorized service center unless otherwise indicated
in this instruction manual. Have defective switches replaced by an authorized
/// USE SAFETY GLASSES. service facility. Don't use the tool if the switch does not turn it on and off.
Also use face or dust mask if the cutting operation is dusty.
/// GUARD AGAINST ELECTRIC SHOCK.
/// DON'T ABUSE THE CORD. Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators,
Never carry the tool by the cord or yank it to disconnect it from the socket. ranges, refrigerators).
Keep the cord away from heat, oil, and sharp edges.
/// REPLACEMENT PARTS.
/// SECURE WORK. When servicing a tool, use only identical replacement parts.
Use clamps or a vise to hold the work. It's safer than using your hand and it
frees both hands to operate the tool. /// VOLTAGE WARNING:
Before connecting the tool to a power source (receptacle, outlet, etc.) Be sure the
/// DON'T OVERREACH. voltage supplied is the same as that specified on the nameplate of the tool. A
Keep proper footing and balance at all times. power source with voltage greater than that specified for the tool can result in
SERIOUS INJURY to the user V as well as damage to the tool. If in doubt, DO NOT
/// MAINTAIN TOOLS WITH CARE. PLUG IN THE TOOL. Using a power source with voltage less than the nameplate
Keep cutting tools sharp and clean for better and safer performance. Follow rating is harmful to the motor.
instructions for lubrication and changing accessories. Inspect tool cord
periodically and if damaged, have it repaired by an authorized service facility.
Inspect extension cords periodically and replace, if damaged. Keep handles dry,
clean and free from oil and grease.

Note Guarantee
• Makita reserves the right to change specifications of parts and Every Makita tool is thoroughly inspected and tested before leaving the
accessories without notice. factory. It is guaranteed against defective workmanship and materials. Should
any trouble develop, return the COMPLETE tool prepaid to Makita or point of
• Items of standard equipment and specifications may vary by purchase. If inspection shows trouble is caused by defective workmanship of
country or area. material, all repairs will be made without charge. The guarantee does not
apply where repairs have been made or attempted by others; repairs are due
• Net weight and dimensions may differ by the type of battery. to normal wear; the tool has been abused or in an accident; misuse is evident
– caused by overloading the tool beyond its capacity, use of the tool after
• Standard export color for motor housing is Makita industrial green (blue). partial failure or use with improper accessories.

• Please state required voltage when ordering. These offers are subject to
availability in each country. Actual product color may differ slightly from
color reproduced here.

• The weight may differ depending on the attachment(s), including the battery
cartridge. The lightest and heaviest combination, according to EPTA-Procedure
01/2014
 Safety Drilling
3

(Wood/Metal) 10

Wear eye protection Wear ear protection Wear a mask

Drilling
(Masonry) 38
Wear protective gloves Wear protective shoes Read the instruction manuals

Remove plug from socket

Fastening 64

Materials Drill and

Screw Bit Sets 85

Stone

Reinforced concrete Concrete Red brick

Cutting 92

Brick Porous concrete

Jigsaw /
Reciprosawing 106

Wood

Wood Wood with nails Pallet

Brushing 118

Laminate Sandwich panel Plywood

Bonded Abrasive 122

Veneered wood Sandwich material Chipboard

Metal Coated Abrasive 133

Metal Metal plates Aluminum

Sheet metal Non-ferrous metals Metal & Stainless

Multi Tool 147

Stainless steel Cast iron

Diamond 157

Other Materials

Glass fibre reinforced plastic, epoxy Glass Wood and plastic combined Planing /
Routering 175

Ceramic tiles Plastic Fiber cement board

OPE 188
Perspex Aerated concrete block Wood and metal

Plaster board Miscellaneous 206

4

Drilling / Fastening Impact Drilling / Demolition

Fastening P.64 Drilling (Wood/Metal) P.10

Screw bit Drill bit
Socket bit
Drill
Angle Drill
Step drill bit & Countersink bit
Driver Drill Drilling (Wood/Metal) P.10 Combination
Hammer
Drill bit (3 Mode)
Hole saw

Step drill bit & Countersink bit

Diamond P.157
Hole saw Rotary Hammer Diamond core bit (Dry type)
(2 Mode
SDS PLUS Model)
Coated Abrasive P.133
Hammer Flap wheel Drilling (Masonry) P.38
Driver Drill
Tungsten carbide-tipped bit
Hammer Drill Rotary
Hammer
Brushing (SDS Max
Model) Bull point
Nylon brush & Wire brush

Cold chisel

Drilling (Masonry) P.38 Demolition

Hammer Grooving chisel
Masonry bit with straight shank
(Tungsten carbide-tipped bit)
Scaling chisel

Scraper assembly 100

Diamond P.157 (SDS-PLUS only)
Power
Diamond Core Diamond core bit Scraper
(Dry type) (For Model 8406, 8406C) Clay spade
Hammer Drill

Bushing tool

Fastening P.64 Rammer

Screw bit
Socket bit Electric Breaker Ground rod adapter
Drywall
Screwdriver
Screwdriver
Drilling (Wood/Metal) P.10 Cutting (New Material, Masonry, Metal)
Drill bit with 1/4"Hex shank Diamond P.157
Impact Driver Cutter Diamond wheel

Drilling (Masonry) P.38

Masonry Bit with 1/4"Hex shank
4 Mode
Impact Driver Angle Bonded Abrasive P.122
Cutter Abrasive cut-off wheel
Fastening P.64
Socket Extension bar
Portable
Cut-off
Universal joint
Impact Cutting P.92
Wrench
Bit adapter
Screw bit Carbide-tipped saw blade for Metal
assembly
Socket bit

Metal Cutter
Metal Cutting Saw
Fastening P.64
Grooving TCT Saw Blade
Screw bit

Auto Feed
Screwdriver Aluminum
Miscellaneous P.206 Groove Cutter

Drywall screw strip

Jigsaw / Reciprosawing P.106
Power Mixer Band saw blade

Mixing blade
Portable Band Saw
 5

Grinding Sanding Grinding Sanding

Bonded Abrasive P.122 Coated Abrasive P.133

Angle Grinder Flap wheel
Depressed center wheel Flexible grinding wheel
Die Grinder

Bonded Abrasive P.122

Cut-off wheel Thin Cut-off wheel
Wheel point Tungsten carbide burrs

Coated Abrasive P.133 Multi Tool P.147

Multi Tool Multi Tool
Flap Disc Multi-disc
Accessories

Fiber sanding disc

Sawing
Brushing P.118 Slide Compound Miter Saw Cutting P.92
Wire brush Circular Saw
Table Saw Saw blade

Diamond P.157
Concrete Planer Jigsaw / Reciprosawing P.106
Diamond wheels
Jig saw Jig saw blade

Reciprosaw blade
Offset diamond wheel
Reciprosaw

Band saw blade

Coated Abrasive P.133
Disc Band saw
Sander Fiber sanding disc

Planing / Routering
Polisher Wool bonnet
Planing / Routering P.175
Sponge pad Wool pad
Planer Planer blade Mini planer blade

Stone Polisher
100mm Diamond polishing pad
(Hook & loop type) Router Router bit

Belt Sander Abrasive belt

Outdoor Power Equipment

P.188
Finishing Sander Abrasive paper Brushcutter blades Chain blade

Shear blade

Random Orbit Sander Abrasive disc Nozzle

Nylon cutting head

Miscellaneous
Brushing P.118 Hand Tool P.206
Wheel Sander
Wheel

Bonded Abrasive

Bench Grinder
Straight Grinder
Bonded Abrasive P.122 Pneumatic Tool P.206
Grinding wheel Nails Staple
 6 Ideal for Cordless Tool Accessories
Bonded Abrasive
Coated Abrasive
Multi Tool
Diamond

What is Ideal for DC tool Accessories ?

Provides the greatest performance on DC tools!
OPE

Higher speed, more work amount on a single full battery charge and a nice sense
of use.* Here are the parties which give you the greatest performance on your
MAKITA DC tools. You can find recommended accessaries for DC tools with DC
Miscellaneous

tool icons with an emphasized battery symbol. Try and see MAKITA's leading-edge
technology.
*Features may vary by item.
 7

This movie was filmed in Japan.

Models and specs may vary by country.

Efficient Sharp Tip's Top Angle

Ideal For
Cordless
The amount of cutting per 1 charge
Efficient Curved Tip's Body

Current
100 140%
165mm x 48T UP
Efficient Slimmed Tip's Bottom

240
New
165mm x 56T

This movie was filmed in Japan.

Models and specs may vary by country.

Strong and least chipping

The amount of cutting per 1 charge

Plate: 1.2mm

Release swarf smoothly

Current
100
150mm x 32T
60%
Plate: 0.95mm UP
Superior in straight cutting
160
New
150mm x 33T
8

Thin cutting wheel 20%

100
0.8mm 0.8mm thickness for fast cutting Current
UP

Thinner thickness
0.8mm thinner thickness brings ... 120
fast cutting / reduction of cutting resistance / less New
burr of materials / less dust of materials The amount of cutting per 1 charge

2in1 grinding wheel 15%

2.2mm Cutting and deburring are possible in
100 UP
Current
one disc
Specialized cutting work 115
New
Thanks to "SA"grid and 2.2mm thinner thickness, it
enables you to cut fast and deburring safety. The amount of cutting per 1 charge

Flexible grinding wheel 70%

Low vibration and no need back-up pad
100 UP
Current
Shock absorbed structure
Added shock absorbing material. You can feel 170
overwhelmingly low vibration. New
Grinding speed is also faster because of its flexibility. The amount of grinding per 1 charge
It can touch materials more efficiency.

for Tile Thin diamond wheel 60%

1.4mm Smooth & light cutting
100 UP
Current
Thinner thickness & enough strength
1.4mm thickness able to get smooth and light cutting. 160
New
Corrugated Rim increases wheel tension and
reduces vibration during the cut. The amount of cutting per 1 charge

for Concrete/
Stone Specialized cutting work
This blade is designed as 1.6mm.
100 50%
1.6mm So smooth and light cutting is available.
Current
UP

It was lightened by punching the body.

It is also reduce the load on the battery and increased 150
the cutting distance per 1 battery charge. New
The amount of cutting per 1 charge

Abrasive Cut-off wheel

Specialized for Metal stud

Thinner blade & the optimum

bonding 30%
100
2.5mm 2.5mm thickness blade for smooth Current
UP
and fast cutting.
The optimum bonding for fast cutting 130
and longer life. New
The amount of cutting per 1 charge
 9

Extreme torsion technology

Longer life time
Torsion section
flexes under load and
takes pressure off bit tip

Japanese teeth Reciprosaw Blade

0.6mm thickness Japanese teeth
for fine cutting surface

Japanese teeth
New Normal

Back
Front
Upward
3 sharpened edges cut smoothly the fiber of the
bamboos and trees. Perfect Finish! Bad Finish...
For model: DR185, DJR183, DJR145, JR100D, JR103D, JR105D

Four-leaf Nylon cord Diameter Color

1.65 mm Blue
Four-Leaf Line 2.0 mm Green
2.4 mm Orange
2.7 mm Red
Low noise and energy saving
Round Four-leaf
6.5dB
DOWN

97
dB 90.5
dB
This shape makes small vortex and realizes
low noise and energy saving feature thanks
Round Four-leaf
to less air resistance.
ACCESSORIES
Drilling (Wood/Metal)

118°chisel edge 135°split point HSS-R HSS-G

HSS-Co 5% M-force HSS-TiN For SDS-PLUS Hammers

Tungsten carbide tipped Use coolant. Do not drill with impact

Accessories 11

HSS metal drill bit series

(Wood/Metal)
Drilling
Range

Speed
7
200 M-force
5
HSS-TiN
2 HSS-TiN
economy 6
HSS-TiN
impact drill 8
1 3 HSS-G 4 HSS-Co
100 HSS-R Double ended

Life
100 150 200 250 300

Description 1 2 3 4 5 6 7 8

Range Specialized

HSS-R HSS-TiN economy HSS-G Double ended HSS-TiN HSS-TiN impact M-force HSS-Co5%
drill
Description

Made of

* Roll forged Ground

Process of
manufacturing
Chisel edge 118° Split point 135° Chisel edge 118° Split point 135° M-shape Split point 135°
**
Tip geometry

Black oxide finish TiN coating Bright finish TiN coating Amber finish

Surface
Rust resistant Long life Long life Rust resistant
Straight (Cylindrical) Straight (Cylindrical) 1/4”Hex Straight (Three flat) Straight (Cylindrical)

Shank
1/4”Hex
Better grip than
Cylindrical shank

Recommended Acceptable

Material chart 1 2 3 4 5 6 7 8

Wood

Plastic

Non-ferrous
metal***
Material

Sheet steel

Cast iron

Alloy steel

Stainless steel

* Roll forged: Made by die-casted rolling machine. It is economical price. ** 135°split point: Ensure no walking and start fast, on contact. *** Non-ferrous metal (Such as Copper,
Ground: Drill bits ground from the block with excellent surface quality. M-shape: Designed to focus on drilling smoothly and speedily. Nickel and Zinc)
 12

HSS metal drill bit assortment

(Wood/Metal)
Drilling

Single pkg. Set

Series Shank Assortment set
1 and 2pcs. 5 and 10pcs.

(Masonry)
Drilling
HSS-R Straight Size: Metric Size: Metric Size: Metric

Fastening
1 and 2pcs. 5 and 10pcs. set 13pcs. set 19pcs. set 25pcs. set
HSS-TiN Straight Size: Metric and inch Size: Metric and inch Size: Inch/Metric
Economy

Screw Bit Sets

Drill and
1 and 2pcs. 5 and 10pcs. set 18pcs. set / 19pcs. set

HSS-G Straight Size: Metric and inch Size: Metric and inch Size: Metric

Cutting
19pcs. set 25pcs. set

Reciprosawing
6pcs. set 10pcs. set 13pcs. set

Jigsaw /
Mertic : 1 pcs.
inch : 1 and 2 pcs. 5 and 10pcs. set
19pcs. set 25pcs. set

HSS-TiN Straight Size: Metric and inch Size: Metric Size: Metric

Brushing
1 and 2pcs. 5pcs. set 10pcs. set 6pcs. set 10pcs. set 13pcs. set 19pcs. set

Bonded Abrasive
1/4'' Hex Size: Metric and inch Size: Inch
(MZ)

1pcs.

Coated Abrasive
5pcs. set

M-force Straight Size: Metric Size: Metric

Multi Tool
1pcs. 5pcs. set 19pcs. set 25pcs. set
HSS-Co Straight Size: Metric and inch Size: Metric and inch Size: Metric
Diamond

Mertic : 1 pcs.
inch : 1 and 2 pcs. 5pcs. set 6pcs. set 10pcs. set 13pcs. set 19pcs. set 25pcs. sett
Routering
Planing /
OPE
Miscellaneous
 Overall Working
HSS-R metal drill bit Bit diameter
length length Per pkg. Part No.
Roll forged HSS drill bit (mm)
(mm) (mm)
5.3 86 52 10 D-46888
5.5 93 57 10 D-38657
Overall Working 6 93 57 10 D-38663
Bit diameter
length length Per pkg. Part No.
(mm) 6.5 101 63 10 D-38679
(mm) (mm)
6.8 109 69 10 D-46894
1 34 12 2 D-38283
7 109 69 10 D-38685
1.5 40 18 2 D-38299
7.5 109 69 10 D-38691
2 49 24 2 D-38308
8 117 75 10 D-38700
2.5 57 30 2 D-38314
8.5 117 75 10 D-38716
2.6 57 30 2 D-38320
8.8 125 81 10 D-46903
2.9 61 33 2 D-46931
9 125 81 10 D-38722
3 61 33 2 D-38336
9.5 125 81 10 D-38738
3.2 65 36 2 D-38342
10 133 87 10 D-38744
3.3 65 36 2 D-46713
10.3 133 87 5 D-46919
3.5 70 39 2 D-38358
10.5 133 87 5 D-38750
4 75 43 2 D-38364
10.8 142 94 5 D-46925
4.2 75 43 1 D-38370
11 142 94 5 D-38766
4.5 80 47 1 D-38386
11.5 142 94 5 D-38772
4.8 86 52 1 D-38392
12 151 101 5 D-38788
5 86 52 1 D-38401
12.5 151 101 5 D-38794
5.2 86 52 1 D-46729
13 151 101 5 D-38803
5.3 86 52 1 D-46947
5.5 93 57 1 D-38417
6 93 57 1 D-38423 HSS-TiN metal drill bit economy
6.5 101 63 1 D-38439 Half ground HSS drill bit
6.8 109 69 1 D-46953 *13mm three flat shank

7 109 69 1 D-38445
7.5 109 69 1 D-38451
8 117 75 1 D-38467
8.5 117 75 1 D-38473
8.8 125 81 1 D-46969
9 125 81 1 D-38489
10 133 87 1 D-38495
Overall Working
10.3 133 87 1 D-46975 Bit diameter
length length Per pkg. Part No.
(mm)
10.8 142 94 1 D-46981 (mm) (mm)
11 142 94 1 D-38504 1 34 12 2 D-64004
12 151 101 1 D-38510 1.5 40 18 2 D-64010
13 151 101 1 D-38526 2 49 24 2 D-64026
2.5 57 30 2 D-64032

HSS-R 5pcs.,10pcs. metal drill bit set 3 61 33 2 D-64048

3.5 70 39 2 D-64054
4 75 43 2 D-64060
4.5 80 47 1 D-64076
5 86 52 1 D-64082
5.5 93 57 1 D-64098

Overall Working 6 93 57 1 D-64107

Bit diameter
length length Per pkg. Part No. 6.5 101 63 1 D-64113
(mm)
(mm) (mm)
7 109 69 1 D-64129
1 34 12 10 D-38532
7.5 109 69 1 D-64135
1.5 40 18 10 D-38548
2 49 24 10 D-38554 8 117 75 1 D-64141

2.5 57 30 10 D-38560 8.5 117 75 1 D-64157

2.9 61 33 10 D-46872 9 125 81 1 D-64163
3 61 33 10 D-38576 9.5 125 81 1 D-64179
3.2 65 36 10 D-38582 10 133 87 1 D-64185
3.3 65 36 10 D-46698 10.5 133 87 1 D-64191
3.5 70 39 10 D-38598 11 142 94 1 D-64200
4 75 43 10 D-38607
11.5 142 94 1 D-64216
4.2 75 43 10 D-38613
12 151 101 1 D-64222
4.5 80 47 10 D-38629
12.5 151 101 1 D-64238
4.8 86 52 10 D-38635
5 86 52 10 D-38641 13 151 101 1 D-64244

5.2 86 52 10 D-46707
 Overall Working
Bit diameter
length length Per pkg. Part No.
HSS-TiN metal drill bit economy
(mm) Half ground HSS drill bit
(mm) (mm)
14 160 108 1 *D-65741
15 169 114 1 *D-65757
16 178 120 1 *D-65763
17 184 125 1 *D-65779
18 191 130 1 *D-65785 Size: inch
19 198 135 1 *D-65791 Overall Working
Bit diameter
length length Per pkg. Part No.
20 205 140 1 *D-65800 (mm)
(mm) (mm)
1/16" 1-7/8" 7/8" 2 D-64509
HSS-TiN 5pcs., 10pcs. metal drill bit economy 5/64" 2" 1" 2 D-64515
Half ground HSS drill bit 3/32" 2-1/4" 1-1/4" 2 D-64521
7/64" 2-5/8" 1-1/2" 2 D-64537
1/8" 2-3/4" 1-5/8" 2 D-64543
9/64" 2-7/8" 1-3/4" 2 D-64559
5/32" 3-1/8" 2" 1 D-64565
11/64" 3-1/4" 2-1/8" 1 D-64571
3/16" 3-1/2" 2-5/16" 1 D-64587
13/64" 3-5/8" 2-7/16" 1 D-64593
Overall Working
Bit diameter 7/32" 3-3/4" 2-1/2" 1 D-64602
length length Per pkg. Part No.
(mm) 15/64" 3-7/8" 2-5/8" 1 D-64618
(mm) (mm)
1 34 12 10 D-64250 1/4" 4" 2-3/4" 1 D-64624
1.5 40 18 10 D-64266 17/64" 4-1/8" 2-7/8" 1 D-64630
2 49 24 10 D-64272 9/32" 4-1/4" 2-15/16" 1 D-64646
2.5 57 30 10 D-64288 19/64" 4-3/8" 3-1/16" 1 D-64652
3 61 33 10 D-64294 5/16" 4-1/2" 3-3/16" 1 D-64668
3.5 70 39 10 D-64303 21/64" 4-5/8" 3-5/16" 1 D-64674
4 75 43 10 D-64319 11/32" 4-3/4" 3-7/16" 1 D-64680
4.5 80 47 10 D-64325 23/64" 4-7/8" 3-1/2" 1 D-64696
5 86 52 10 D-64331 3/8" 5" 3-5/8" 1 D-64705
5.5 93 57 10 D-64347 25/64" 5-1/8" 3-3/4" 1 D-64711
6 93 57 10 D-64353 13/32" 5-1/4" 3-7/8" 1 D-64727
6.5 101 63 10 D-64369 27/64" 5-3/8" 3-15/16" 1 D-64733
7 109 69 10 D-64375 7/16" 5-1/2" 4-1/16" 1 D-64749
7.5 109 69 10 D-64381 29/64" 5-5/8" 4-3/16" 1 D-64755
8 117 75 10 D-64397 15/32" 5-3/4" 4-5/16" 1 D-64761
8.5 117 75 5 D-64406 31/64" 5-7/8" 4-3/8" 1 D-64777
9 125 81 5 D-64412 1/2" 6" 4-1/2" 1 D-64783
9.5 125 81 5 D-64428
10 133 87 5 D-64434
HSS-TiN 5pcs., 10pcs. metal drill bit economy
10.5 133 87 5 D-64440 Half ground HSS drill bit
11 142 94 5 D-64456
11.5 142 94 5 D-64462
12 151 101 5 D-64478
12.5 151 101 5 D-64484
13 151 101 5 D-64490
Size: inch
Overall Working
Bit diameter
length length Per pkg. Part No.
(mm)
(mm) (mm)
1/16" 1-7/8" 7/8" 10 D-64799
5/64" 2" 1" 10 D-64808
3/32" 2-1/4" 1-1/4" 10 D-64814
7/64" 2-5/8" 1-1/2" 10 D-64820
1/8" 2-3/4" 1-5/8" 10 D-64836
9/64" 2-7/8" 1-3/4" 10 D-64842
5/32" 3-1/8" 2" 10 D-64858
11/64" 3-1/4" 2-1/8" 10 D-64864
3/16" 3-1/2" 2-5/16" 10 D-64870
13/64" 3-5/8" 2-7/16" 10 D-64886
7/32" 3-3/4" 2-1/2" 10 D-64892
1/4" 4" 2-3/4" 10 D-64901
5/16" 4-1/2" 3-3/16" 10 D-64917
3/8" 5" 3-5/8" 5 D-64923
7/16" 5-1/2" 4-1/16" 5 D-64939
1/2" 6" 4-1/2" 5 D-64945
 Overall Working
HSS-G metal drill bit Bit diameter
length length Per pkg. Part No.
Fully ground HSS drill bit (mm)
(mm) (mm)
2.5 57 30 10 D-06270
2.75 61 33 10 D-06286
2.9 61 33 10 D-46648
3 61 33 10 D-06292
3.2 65 36 10 D-34942
Overall Working 3.25 65 36 10 D-06301
Bit diameter
length length Per pkg. Part No.
(mm) 3.3 65 36 10 D-46567
(mm) (mm)
1.5 40 18 1 D-09656 3.5 70 39 10 D-06317
2 49 24 1 D-09662 3.75 70 39 10 D-06323
2.5 57 30 1 D-09678 4 75 43 10 D-06339
2.9 61 33 1 D-46816 4.2 75 43 10 D-17762
3 61 33 1 D-09684 4.25 75 43 10 D-06345
3.2 65 36 1 D-46589 4.5 80 47 10 D-06351
3.3 65 36 1 D-46595 4.75 80 47 10 D-06367
3.5 70 39 1 D-09690 5 86 52 10 D-06373
4 75 43 1 D-09709 5.2 86 52 10 D-34986
4.2 75 43 1 D-46604 5.25 86 52 10 D-06389
4.5 80 47 1 D-09715 5.3 86 52 10 D-46654
5 86 52 1 D-09721 5.5 93 57 10 D-06395
5.2 86 52 1 D-46610 5.75 93 57 10 D-06404
5.3 86 52 1 D-46822 6 93 57 10 D-06410
5.5 93 57 1 D-09737 6.25 101 63 10 D-06426
6 93 57 1 D-09743 6.5 101 63 10 D-06432
6.5 101 63 1 D-09759 6.75 109 69 10 D-06448
6.8 109 69 1 D-46838 6.8 109 69 10 D-46779
7 109 69 1 D-09765 7 109 69 10 D-06454
7.5 109 69 1 D-09771 7.25 109 69 10 D-06460
8 117 75 1 D-09787 7.5 109 69 10 D-06476
8.5 117 75 1 D-09793 7.75 117 75 10 D-06482
8.8 125 81 1 D-46844 8 117 75 10 D-06498
9 125 81 1 D-09802 8.25 117 75 5 D-06507
9.5 125 81 1 D-09818 8.5 117 75 5 D-06513
10 133 87 1 D-09824 8.75 125 81 5 D-06529
10.3 133 87 1 D-46850 8.8 125 81 5 D-46785
10.5 133 87 1 D-09830 9 125 81 5 D-06535
10.8 142 94 1 D-46866 9.25 125 81 5 D-06541
11 142 94 1 D-09846 9.5 125 81 5 D-06557
11.5 142 94 1 D-09852 9.75 133 87 5 D-06563
12 151 101 1 D-09868 10 133 87 5 D-06579
12.5 151 101 1 D-09874 10.25 133 87 5 D-06585
13 151 101 1 D-09880 10.3 133 87 5 D-46791
10.5 133 87 5 D-06591
10.8 142 94 5 D-46800
HSS-G 5pcs.,10pcs. metal drill bit set
11 142 94 5 D-06600
11.5 142 94 5 D-06616
12 151 101 5 D-06622
12.5 151 101 5 D-06638
13 151 101 5 D-06644

Overall Working
Bit diameter
length length Per pkg. Part No.
(mm)
(mm) (mm)
1.5 40 18 10 D-06236
1.75 46 22 10 D-06242
2 49 24 10 D-06258
2.25 53 27 10 D-06264
HSS-G metal drill bit Bit diameter
Overall Working
Per pkg. Part No.
Fully ground HSS drill bit length length
9/32'' 4-1/4'' 2-15/16'' 10 D-22084
19/64'' 4-3/8'' 3-1/16'' 10 D-22096
5/16'' 4-1/2'' 3-3/16'' 10 D-22109
21/64'' 4-5/8'' 3-5/16'' 10 D-37116

Size: inch 11/32'' 4-3/4'' 3-7/16'' 10 D-37122

23/64'' 4-7/8'' 3-1/2'' 10 D-37138
Overall Working
Bit diameter Per pkg. Part No. 3/8'' 5'' 3-5/8'' 10 D-37219
length length
25/64'' 5-1/8'' 3-3/4'' 10 D-37225
1/16'' 1-7/8'' 7/8'' 2 D-22230
13/32'' 5-1/4'' 3-7/8'' 10 D-37231
5/64'' 2'' 1'' 2 D-22246
21/64'' 4-5/8'' 3-5/16'' 5 D-22115
3/32'' 2-1/4'' 1-1/4'' 2 D-22252
11/32'' 4-3/4'' 3-7/16'' 5 D-22121
7/64'' 2-5/8'' 1-1/2'' 2 D-22268
23/64'' 4-7/8'' 3-1/2'' 5 D-22137
1/8'' 2-3/4'' 1-5/8'' 2 D-22274
3/8'' 5'' 3-5/8'' 5 D-22143
9/64'' 2-7/8'' 1-3/4'' 2 D-22280
25/64'' 5-1/8'' 3-3/4'' 5 D-22159
5/32'' 3-1/8'' 2'' 1 D-22296
13/32'' 5-1/4'' 3-7/8'' 5 D-22165
11/64'' 3-1/4'' 2-1/8'' 1 D-22305
27/64'' 5-3/8'' 3-15/16'' 5 D-22171
3/16'' 3-1/2'' 2-5/16'' 1 D-22311
7/16'' 5-1/2'' 4-1/16'' 5 D-22187
13/64'' 3-5/8'' 2-7/16'' 1 D-22327
29/64'' 5-5/8'' 4-3/16'' 5 D-22193
7/32'' 3-3/4'' 2-1/2'' 1 D-22333
15/32'' 5-3/4'' 4-5/16'' 5 D-22202
15/64'' 3-7/8'' 2-5/8'' 1 D-22349
31/64'' 5-7/8'' 4-3/8'' 5 D-22218
1/4'' 4'' 2-3/4'' 1 D-22355
1/2'' 6'' 4-1/2'' 5 D-22224
17/64'' 4-1/8'' 2-7/8'' 1 D-22361
9/32'' 4-1/4'' 2-15/16'' 1 D-22377
19/64'' 4-3/8'' 3-1/16'' 1 D-22383 HSS-G metal drill bit (Black oxide)
5/16'' 4-1/2'' 3-3/16'' 1 D-22399 Fully ground HSS drill bit
21/64'' 4-5/8'' 3-5/16'' 1 D-22408
11/32'' 4-3/4'' 3-7/16'' 1 D-22414
23/64'' 4-7/8'' 3-1/2'' 1 D-22420
3/8'' 5'' 3-5/8'' 1 D-22436
25/64'' 5-1/8'' 3-3/4'' 1 D-22442
Size: inch
13/32'' 5-1/4'' 3-7/8'' 1 D-22458
Overall Working
27/64'' 5-3/8'' 3-15/16'' 1 D-22464 Bit diameter Per pkg. Part No.
length length
7/16'' 5-1/2'' 4-1/16'' 1 D-22470
1/16'' 1-7/8'' 7/8'' 2 D-59916
29/64'' 5-5/8'' 4-3/16'' 1 D-22486
5/64'' 2'' 1'' 2 D-59922
15/32'' 5-3/4'' 4-5/16'' 1 D-22492
31/64'' 5-7/8'' 4-3/8'' 1 D-22501 3/32'' 2-1/4'' 1-1/4'' 2 D-59938

1/2'' 6'' 4-1/2'' 1 D-22517 7/64'' 2-5/8'' 1-1/2'' 2 D-59944

1/8'' 2-3/4'' 1-5/8'' 2 D-59950
9/64'' 2-7/8'' 1-3/4'' 2 D-59966
HSS-G 5pcs,10pcs. metal drill bit set
5/32'' 3-1/8'' 2'' 1 D-59972
11/64'' 3-1/4'' 2-1/8'' 1 D-59988
3/16'' 3-1/2'' 2-5/16'' 1 D-59994
13/64'' 3-5/8'' 2-7/16'' 1 D-60006
7/32'' 3-3/4'' 2-1/2'' 1 D-60012
15/64'' 3-7/8'' 2-5/8'' 1 D-60028
1/4'' 4'' 2-3/4'' 1 D-60034
17/64'' 4-1/8'' 2-7/8'' 1 D-60040
Size: inch
9/32'' 4-1/4'' 2-15/16'' 1 D-60056
Overall Working
Bit diameter Per pkg. Part No. 19/64'' 4-3/8'' 3-1/16'' 1 D-60062
length length
5/16'' 4-1/2'' 3-3/16'' 1 D-60078
1/16'' 1-7/8'' 7/8'' 10 D-21945
5/64'' 2'' 1'' 10 D-21951 21/64'' 4-5/8'' 3-5/16'' 1 D-60084
3/32'' 2-1/4'' 1-1/4'' 10 D-21967 11/32'' 4-3/4'' 3-7/16'' 1 D-60090
7/64'' 2-5/8'' 1-1/2'' 10 D-21973 23/64'' 4-7/8'' 3-1/2'' 1 D-60109
1/8'' 2-3/4'' 1-5/8'' 10 D-21989 3/8'' 5'' 3-5/8'' 1 D-60115
9/64'' 2-7/8'' 1-3/4'' 10 D-21995 25/64'' 5-1/8'' 3-3/4'' 1 D-60121
5/32'' 3-1/8'' 2'' 10 D-22006 13/32'' 5-1/4'' 3-7/8'' 1 D-60137
11/64'' 3-1/4'' 2-1/8'' 10 D-22012
27/64'' 5-3/8'' 3-15/16'' 1 D-60143
3/16'' 3-1/2'' 2-5/16'' 10 D-22028
7/16'' 5-1/2'' 4-1/16'' 1 D-60159
13/64'' 3-5/8'' 2-7/16'' 10 D-22034
29/64'' 5-5/8'' 4-3/16'' 1 D-60165
7/32'' 3-3/4'' 2-1/2'' 10 D-22040
15/32'' 5-3/4'' 4-5/16'' 1 D-60171
15/64'' 3-7/8'' 2-5/8'' 10 D-22056
1/4'' 4'' 2-3/4'' 10 D-22062 31/64'' 5-7/8'' 4-3/8'' 1 D-60187
17/64'' 4-1/8'' 2-7/8'' 10 D-22078 1/2'' 6'' 4-1/2'' 1 D-60193
 Bit Overall Working
Double ended drill bit diameter length length Per pkg. Part No.
Fully ground HSS drill bit (mm) (mm) (mm)
2.6 57 30 2 D-42999
3 61 33 2 D-43000
3.2 65 36 2 D-43016
3.3 65 36 2 D-43022
Overall Working 3.5 70 39 2 D-43038
Bit diameter
length length Per pkg. Part No. 4 75 43 2 D-43044
(mm)
(mm) (mm) 4.1 75 43 1 D-43050
2 38 7.5 10 B-26652
4.2 75 43 1 D-43066
2.5 43 10 10 B-33772
4.5 80 47 1 D-43072
3 46 10.6 10 B-26668 4.8 86 52 1 D-43088
3.1 49 11 10 B-26674 5 86 52 1 D-43094
3.2 49 11 10 B-26680 5.2 86 52 1 D-43103
3.3 49 11 10 B-26696 5.5 93 57 1 D-43119
3.5 52 13 10 B-26705 6 93 57 1 D-43125
3.8 55 14 10 B-26711 6.5 101 63 1 D-43131
4 55 14 10 B-26727 7 109 69 1 D-43147
4.1 55 14 10 B-26733 7.5 109 69 1 D-43153
4.2 55 14 10 B-26749 8 117 75 1 D-43169
4.3 55 14 10 B-26755 8.5 117 75 1 D-43175
4.5 58 16 10 B-26761 9 125 81 1 D-43181

4.8 62 17 10 B-26777 9.5 125 81 1 D-43197

10 133 87 1 D-43206
4.9 62 17 10 B-26783
10.5 133 87 1 D-45375
5 62 17 10 B-26799
11 142 94 1 D-43212
5.1 62 17 10 B-26808
11.5 142 94 1 D-45381
5.2 62 17 10 B-26814
12 151 101 1 D-43228
5.5 66 19 10 B-26820
12.5 151 101 1 D-45397
6 66 19 10 B-26836
13 151 101 1 D-43234
6.5 70 21 10 B-33788
8 79 25 10 B-26842
10 89 25 10 B-26858 HSS-TiN 10pcs. metal drill bit set

Size: inch
Bit Overall Working Bit Overall Working
Per pkg. Part No. diameter length length Per pkg. Part No.
diameter length length
(mm) (mm) (mm)
7/64'' 1-7/8'' 5/8'' 10 B-29907
1 34 12 10 D-43240
1/8'' 2'' 5/8'' 10 B-29913
1.5 40 18 10 D-43256
9/64'' 2'' 5/8'' 10 B-29929
2 49 24 10 D-43262
5/32'' 2-1/16'' 5/8'' 10 B-29935
2.5 57 30 10 D-43278
3/16'' 2-3/16'' 5/8'' 10 B-29941
3 61 33 10 D-43284
7/32'' 2-3/8'' 11/16'' 10 B-29957
3.2 65 36 10 D-43290
1/4'' 2-1/2'' 7/8'' 10 B-29963
3.3 65 36 10 D-43309
#30 2'' 5/8'' 10 B-29979
3.5 70 39 10 D-43315
#20 2-1/8'' 5/8'' 10 B-29985
4 75 43 10 D-43321
#11 2-1/4'' 11/16'' 10 B-29991
4.1 75 43 10 D-43337
4.2 75 43 10 D-43343
HSS-TiN metal drill bit 4.5 80 47 10 D-43359
Fully ground HSS drill bit 4.8 86 52 10 D-43365
5 86 52 10 D-43371
5.2 86 52 10 D-43387
5.5 93 57 10 D-43393
6 93 57 10 D-43402
6.5 101 63 10 D-43418
7 109 69 10 D-43424
Bit Overall Working
diameter length length Per pkg. Part No. 7.5 109 69 10 D-43430
(mm) (mm) (mm) 8 117 75 10 D-43446
1 34 12 2 D-42955 8.5 117 75 10 D-43452
1.5 40 18 2 D-42961 9 125 81 10 D-43468
2 49 24 2 D-42977 9.5 125 81 10 D-43474
2.5 57 30 2 D-42983 10 133 87 10 D-43480
HSS-TiN 5pcs. metal drill bit set HSS-TiN metal drill bit
Fully ground HSS drill bit

Type MZ
Bit Overall Working
Bit Working
diameter length length Per pkg. Part No. Length Shank
diameter length Per pkg. Part No.
(mm) (mm) (mm) (mm) Type
(mm) (mm)
10.5 133 87 5 D-43496
2.5 78 30 MZ 1 D-46517
11 142 94 5 D-43505
3 81 33 MZ 1 D-14928
11.5 142 94 5 D-43511
3.2 85 36 MZ 1 D-14934
12 151 101 5 D-43527
3.3 85 36 MZ 1 D-16081
12.5 151 101 5 D-43533
4 95 43 MZ 1 D-14940
13 151 101 5 D-43549
4.1 95 43 MZ 1 D-16483
4.2 95 43 MZ 1 D-14956
HSS-TiN metal drill bit 5 106 52 MZ 1 D-14962
Fully ground HSS drill bit 5.2 106 52 MZ 1 D-46523
6 113 57 MZ 1 D-14978
6.5 121 63 MZ 1 D-17778
8 117 75 MZ 1 D-15827
10 133 87 MZ 1 D-15833
12 151 101 MZ 1 D-15849
13 151 101 MZ 1 D-15855
Type NZ
Size: inch Bit Working
Length Shank
Overall Working diameter length Per pkg. Part No.
Bit diameter Per pkg. Part No. (mm) Type
length length (mm) (mm)
2.5 78 30 NZ 1 D-46539
1/16'' 1-7/8'' 7/8'' 2 D-60202
3 81 33 NZ 1 D-31114
5/64'' 2'' 1'' 2 D-60218 3.2 85 36 NZ 1 D-31120
3/32'' 2-1/4'' 1-1/4'' 2 D-60224 3.3 85 36 NZ 1 D-31136
7/64'' 2-5/8'' 1-1/2'' 2 D-60230 4 95 43 NZ 1 D-31142
1/8'' 2-3/4'' 1-5/8'' 2 D-60246 4.1 95 43 NZ 1 D-31158
9/64'' 2-7/8'' 1-3/4'' 2 D-60252 4.2 95 43 NZ 1 D-31164

5/32'' 3-1/8'' 2'' 1 D-60268 5 106 52 NZ 1 D-31170

5.2 106 52 NZ 1 D-46545
11/64'' 3-1/4'' 2-1/8'' 1 D-60274
6 113 57 NZ 1 D-31186
3/16'' 3-1/2'' 2-5/16'' 1 D-60280
6.5 121 63 NZ 1 D-31192
13/64'' 3-5/8'' 2-7/16'' 1 D-60296
8 117 75 NZ 1 D-31201
7/32'' 3-3/4'' 2-1/2'' 1 D-60305
10 133 87 NZ 1 D-31217
15/64'' 3-7/8'' 2-5/8'' 1 D-60311 12 151 101 NZ 1 D-31223
1/4'' 4'' 2-3/4'' 1 D-60327 13 151 101 NZ 1 D-31239
17/64'' 4-1/8'' 2-7/8'' 1 D-60333 Size: inch
Type MZ
9/32'' 4-1/4'' 2-15/16'' 1 D-60349
Bit Working Shank
19/64'' 4-3/8'' 3-1/16'' 1 D-60355 Length Per pkg. Part No.
diameter length Type
5/16'' 4-1/2'' 3-3/16'' 1 D-60361
7/64'' 3-15/32'' 1-1/2'' MZ 1 D-23874
21/64'' 4-5/8'' 3-5/16'' 1 D-60377 1/8'' 3-15/32'' 1-5/8'' MZ 1 D-23880
11/32'' 4-3/4'' 3-7/16'' 1 D-60383 9/64'' 3-1/2'' 1-3/4'' MZ 1 D-23896
23/64'' 4-7/8'' 3-1/2'' 1 D-60399 5/32'' 3-13/16'' 2'' MZ 1 D-23905
3/8'' 5'' 3-5/8'' 1 D-60408 3/16'' 4-7/32'' 2-5/16'' MZ 1 D-23911
25/64'' 5-1/8'' 3-3/4'' 1 D-60414 1/4'' 4-3/4'' 2-3/4'' MZ 1 D-23927

13/32'' 5-1/4'' 3-7/8'' 1 D-60420 5/16'' 4-1/2'' 3-3/16'' MZ 1 D-23933

3/8'' 5'' 3-5/8'' MZ 1 D-23949
27/64'' 5-3/8'' 3-15/16'' 1 D-60436
7/16'' 5-1/2'' 4-1/16'' 1 D-60442
29/64'' 5-5/8'' 4-3/16'' 1 D-60458 Rivet drill bit 1/4'' Hex. shank
15/32'' 5-3/4'' 4-5/16'' 1 D-60464 Fully ground HSS drill bit

31/64'' 5-7/8'' 4-3/8'' 1 D-60470

1/2'' 6'' 4-1/2'' 1 D-60486
Type MZ
Bit Working Shank
Length Per pkg. Part No.
diameter length Type

3.3 50 25 MZ 10 B-56437
HSS-TiN Impact drill bit with 1/4'' Hex. shank HSS-G impact drill bit (Black oxide) with 1/4'' Hex.
1/4’’ hex shank HSS-TIN drill bit designed for impact driver.
Bit and shank is intergal and life time is longer than current riveting type 1/4 hex
shank
shank. 1/4’’ hex shank Black oxide drill bit designed for impact driver.
Bit and shank is intergal and life time is longer than current
riveting type 1/4 hex shank.

Size: inch
Type MZ Type MZ
Bit Working Bit Working
Length Shank Length Shank
diameter length Per pkg. Part No. diameter length Per pkg. Part No.
(mm) Type (mm) Type
(mm) (mm) (mm) (mm)
3 64 26 MZ 1 B-50887 1/8'' 2-5/8'' 1-1/8'' MZ 1 A-97748
3.2 67 29 MZ 1 B-50893 9/64'' 2-3/4'' 1-1/8'' MZ 1 A-97754
3.3 70 29 MZ 1 B-50902 5/32'' 2-13/16'' 1-3/16'' MZ 1 A-97760
3.5 70 29 MZ 1 B-50918 11/64'' 2-15/16'' 1-3/16'' MZ 1 A-97776
4 71 30 MZ 1 B-50924 3/16'' 3'' 1-1/4'' MZ 1 A-97782
4.2 71 31 MZ 1 B-50930 13/64'' 3-1/16'' 1-3/8'' MZ 1 A-97798
4.5 75 31 MZ 1 B-50946 7/32'' 3-1/16'' 1-3/8'' MZ 1 A-97807
5 78 33 MZ 1 B-50952 1/4'' 3-3/16'' 1-1/2'' MZ 1 A-97813
5.5 78 35 MZ 1 B-50968 5/16'' 4'' 1-31/32'' MZ 1 A-97829
6 80 37 MZ 1 B-50974 3/8'' 4'' 1-31/32'' MZ 1 A-97835
6.5 81 38 MZ 1 B-50980 1/2'' 4'' 1-31/32'' MZ 1 A-97841
7 89 45 MZ 1 B-50996
7.5 95 50 MZ 1 B-51007
M-Force HSS metal drill bit
8 102 50 MZ 1 B-51013 Fully ground HSS drill bit
8.5 102 50 MZ 1 B-51029
9 102 50 MZ 1 B-51035
10 102 50 MZ 1 B-51041
11 102 50 MZ 1 B-51057
12 102 50 MZ 1 B-51063
13 102 50 MZ 1 B-51079 Bit Overall Working
Type NZ diameter length length Per pkg. Part No.
Bit Working (mm) (mm) (mm)
Length Shank
diameter length Per pkg. Part No. 2 49 24 1 D-29614
(mm) Type
(mm) (mm) 2.5 57 30 1 D-29620
3 64 26 NZ 1 B-51085
3 61 33 1 D-29636
3.2 67 29 NZ 1 B-51091 3.2 65 36 1 D-37633
3.3 70 29 NZ 1 B-51100 3.3 65 36 1 D-46626
3.5 70 29 NZ 1 B-51116 3.5 70 39 1 D-29642
4 71 30 NZ 1 B-51122 4 75 43 1 D-29658
4.2 71 31 NZ 1 B-51138 4.2 75 43 1 D-37649

4.5 75 31 NZ 1 B-51144 4.5 80 47 1 D-29664

5 86 52 1 D-29670
5 78 33 NZ 1 B-51150
5.2 86 52 1 D-37655
5.5 78 35 NZ 1 B-51166
5.5 93 57 1 D-29686
6 80 37 NZ 1 B-51172
6 93 57 1 D-29692
6.5 81 38 NZ 1 B-51188
6.5 101 63 1 D-29701
7 89 45 NZ 1 B-51194 7 109 69 1 D-29717
7.5 95 50 NZ 1 B-51203 7.5 109 69 1 D-29723
8 102 50 NZ 1 B-51219 8 117 75 1 D-29739
8.5 102 50 NZ 1 B-51225 8.5 117 75 1 D-29745
9 102 50 NZ 1 B-51231 9 125 81 1 D-29751

10 102 50 NZ 1 B-51247 9.5 125 81 1 D-29767

10 133 87 1 D-29773
11 102 50 NZ 1 B-51253
10.5 133 87 1 D-29789
12 102 50 NZ 1 B-51269
11 142 94 1 D-29795
13 102 50 NZ 1 B-51275
11.5 142 94 1 D-29804
12 151 101 1 D-29810
12.5 151 101 1 D-29826
13 151 101 1 D-29832
 Bit Overall Working
HSS-Co metal drill bit (Cobalt 5%) diameter length length Per pkg. Part No.
Fully ground HSS drill bit (mm) (mm) (mm)
5.2 86 52 5 D-34992
5.5 93 57 5 D-16704
6 93 57 5 D-16710
6.5 101 63 5 D-16726
7 109 69 5 D-16732
Bit Overall Working 7.5 109 69 5 D-16748
diameter length length Per pkg. Part No.
(mm) (mm) (mm) 8 117 75 5 D-16754
1.5 40 18 1 D-17289 8.5 117 75 5 D-16760
2 49 24 1 D-17295 9 125 81 5 D-16776
2.5 57 30 1 D-17304 9.5 125 81 5 D-16782
3 61 33 1 D-17310 10 133 87 5 D-16798
3.2 65 36 1 D-17326 10.5 133 87 5 D-16807
3.3 65 36 1 D-46660 11 142 94 5 D-16813
3.5 70 39 1 D-17332 11.5 142 94 5 D-16829
4 75 43 1 D-17348 12 151 101 5 D-16835
4.2 75 43 1 D-46676 12.5 151 101 5 D-16841
4.5 80 47 1 D-17354 13 151 101 5 D-16857
5 86 52 1 D-17360
5.2 86 52 1 D-46682 HSS-Co metal drill bits (Cobalt 5%)
5.5 93 57 1 D-17376 Fully ground HSS drill bit
6 93 57 1 D-17382
6.5 101 63 1 D-17398
7 109 69 1 D-17407
7.5 109 69 1 D-17413
8 117 75 1 D-17429
8.5 117 75 1 D-17435 Size: inch

9 125 81 1 D-17441 Bit Overall Working

Per pkg. Part No.
diameter length length
9.5 125 81 1 D-17457
1/16'' 1-7/8'' 7/8'' 2 D-22523
10 133 87 1 D-17463
10.5 133 87 1 D-17479 5/64'' 2'' 1'' 2 D-22539
3/32'' 2-1/4'' 1-1/4'' 2 D-22545
11 142 94 1 D-17485
7/64'' 2-5/8'' 1-1/2'' 2 D-22551
11.5 142 94 1 D-17491
1/8'' 2-3/4'' 1-5/8'' 2 D-22567
12 151 101 1 D-17500
9/64'' 2-7/8'' 1-3/4'' 2 D-22573
12.5 151 101 1 D-17516
5/32'' 3-1/8'' 2'' 1 D-22589
13 151 101 1 D-17522
11/64'' 3-1/4'' 2-1/8'' 1 D-22595
3/16'' 3-1/2'' 2-5/16'' 1 D-22604
HSS-Co 5pcs. metal drill bit (Cobalt 5%)
13/64'' 3-5/8'' 2-7/16'' 1 D-22610
7/32'' 3-3/4'' 2-1/2'' 1 D-22626
15/64'' 3-7/8'' 2-5/8'' 1 D-22632
1/4'' 4'' 2-3/4'' 1 D-22648
17/64'' 4-1/8'' 2-7/8'' 1 D-22654
9/32'' 4-1/4'' 2-15/16'' 1 D-22660
19/64'' 4-3/8'' 3-1/16'' 1 D-22676
Bit Overall Working
5/16'' 4-1/2'' 3-3/16'' 1 D-22682
diameter length length Per pkg. Part No.
(mm) (mm) (mm) 21/64'' 4-5/8'' 3-5/16'' 1 D-22698
1.5 40 18 5 D-16617 11/32'' 4-3/4'' 3-7/16'' 1 D-22707
1.75 46 22 5 D-17625 23/64'' 4-7/8'' 3-1/2'' 1 D-22713
2 49 24 5 D-16623 3/8'' 5'' 3-5/8'' 1 D-22729
2.5 57 30 5 D-16639 25/64'' 5-1/8'' 3-3/4'' 1 D-22735
3 61 33 5 D-16645 13/32'' 5-1/4'' 3-7/8'' 1 D-22741
3.2 65 36 5 D-16651 27/64'' 5-3/8'' 3-15/16'' 1 D-22757
3.3 65 36 5 D-46632 7/16'' 5-1/2'' 4-1/16'' 1 D-22763
3.5 70 39 5 D-16667 29/64'' 5-5/8'' 4-3/16'' 1 D-22779
4 75 43 5 D-16673 15/32'' 5-3/4'' 4-5/16'' 1 D-22785
4.2 75 43 5 D-34958 31/64'' 5-7/8'' 4-3/8'' 1 D-22791
4.5 80 47 5 D-16689 1/2'' 6'' 4-1/2'' 1 D-22800
5 86 52 5 D-16695
HSS-Co 5pcs.metal drill bits (Cobalt 5%) HSS-TiN metal drill bit economy assortment

Size: inch
Bit Overall Working Size: inch
Per pkg. Part No.
diameter length length Per pkg. Set contents Part No.
1/16'' 1-7/8'' 7/8'' 5 D-22816 19pcs. Injection 1.5x2, 2x2, 2.5x2, 3x2, 3.2, 3.5, 4, 4.5, 5, 5.5, 6,
D-67527
5/64'' 2'' 1'' 5 D-22822 case set 6.5, 7, 8, 10mm
Size: inch
3/32'' 2-1/4'' 1-1/4'' 5 D-22838
Per pkg. Set contents Part No.
7/64'' 2-5/8'' 1-1/2'' 5 D-22844
2x1/16",5/64",2x3/32",7/64", 2x1/8", 9/64",
1/8'' 2-3/4'' 1-5/8'' 5 D-22850 18pcs. Injection
5/32", 11/64", 3/16", 13/64", 7/32", 1/4", 5/16", D-70471
case set
9/64'' 2-7/8'' 1-3/4'' 5 D-22866 3/8",1/2"
5/32'' 3-1/8'' 2'' 5 D-22872
11/64'' 3-1/4'' 2-1/8'' 5 D-22888 HSS-G metal drill bit assortment
3/16'' 3-1/2'' 2-5/16'' 5 D-22894
13/64'' 3-5/8'' 2-7/16'' 5 D-22903
7/32'' 3-3/4'' 2-1/2'' 5 D-22919
15/64'' 3-7/8'' 2-5/8'' 5 D-22925
1/4'' 4'' 2-3/4'' 5 D-22931
17/64'' 4-1/8'' 2-7/8'' 5 D-22947
9/32'' 4-1/4'' 2-15/16'' 5 D-22953
19/64'' 4-3/8'' 3-1/16'' 5 D-22969
Per pkg. Set contents Part No.
5/16'' 4-1/2'' 3-3/16'' 5 D-22975
6pcs. Assortment 2, 3, 4, 5, 6, 8mm (1pc.each) D-57196
21/64'' 4-5/8'' 3-5/16'' 5 D-22981
11/32'' 4-3/4'' 3-7/16'' 5 D-22997 10pcs. Assortment 1, 2, 3, 4, 5, 6, 7, 8, 9, 10mm (1pc.each) D-57205
23/64'' 4-7/8'' 3-1/2'' 5 D-23008 19pcs. Index set 1pc each 1.0 to 10.0mm by 19pcs. D-29941
3/8'' 5'' 3-5/8'' 5 D-23014
25pcs. Index set 1pc each 1.0 to 13.0mm by 25pcs. D-50457
25/64'' 5-1/8'' 3-3/4'' 5 D-23020
13/32'' 5-1/4'' 3-7/8'' 5 D-23036 13pcs. Metal box set 1pc each 1.0 to 6.5mm by 13pcs. D-54019

27/64'' 5-3/8'' 3-15/16'' 5 D-23042 19pcs. Metal box set 1pc each 1.0 to 10.0mm by 19pcs. D-54025
7/16'' 5-1/2'' 4-1/16'' 5 D-23058 25pcs. Metal box set 1pc each 1.0 to 13.0mm by 25pcs. D-54031
29/64'' 5-5/8'' 4-3/16'' 5 D-23064
15/32'' 5-3/4'' 4-5/16'' 5 D-23070
31/64'' 5-7/8'' 4-3/8'' 5 D-23086 HSS metal drill bit 5pcs. assortment
1/2'' 6'' 4-1/2'' 5 D-23092 Fully ground HSS drill bit with bright edge and titanium coated flute finish

HSS-R metal drill bit assortment

Set contents Part No.

4 x 75, 5 x 86, 6 x 93, 8 x 117,
D-30514
10 x 133mm (1pc.each)

170pcs. assortment with metal box

Per pkg. Set contents Part No. Fully ground HSS drill bit with bright edge and titanium coated flute finish

13pcs. Metal box set 1pc each 1.0 to 6.5mm by 13pcs. D-54075

19pcs. Metal box set 1pc each 1.0 to 10.0mm by 19pcs. D-54081

25pcs. Metal box set 1pc each 1.0 to 13.0mm by 25pcs. D-54097

Size Part No.

metric size D-30564

HSS-TiN metal drill bit assortment HSS-Co metal drill bit assortment

Per pkg. Set contents Part No. Per pkg. Set contents Part No.
6pcs.
2, 3, 4, 5, 6, 8mm (1pc.each) D-43555 6pcs. Assortment 2, 3, 4, 5, 6, 8mm (1pc.each) D-57168
Assortment
10pcs. 10pcs. Assortment 1, 2, 3, 4, 5, 6, 7, 8, 9, 10mm (1pc.each) D-57174
1, 2, 3, 4, 5, 6, 7, 8, 9, 10mm (1pc.each) D-43561
Assortment
13pcs. 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5mm 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6,
D-43577 13pcs. Assortment D-57180
Assortment (1pc.each) 6.5mm (1pc.each)
19pcs. 1.5x2, 2x2, 2.5x2, 3x2, 3.2, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
B-67795 19pcs. Assortment D-50762
Assortment 7, 8, 10mm 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm(1pc. each)
1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5,
25pcs. Assortment 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, D-50778
13mm(1pc. each)
HSS TiN metal drill bit assortment with 1/4'' Hex. shank

Type MZ
Per pkg. Set contents Part No.
1/8'', 5/32'', 3/16'', 1/4'', 5/16''
5pcs. Assortment D-35318
(1pc. each)

HSS-TiN Impact drill bit with 1/4'' Hex. shank

assortment
1/4’’ hex shank HSS-TIN drill bit designed for impact driver.
Bit and shank is intergal and life time is longer than current riveting type 1/4 hex
shank.

Type MZ
Per pkg. Set contents Part No.

5pcs. Assortment 3, 4, 5, 6, 8mm (1pc. each) B-57308

M-force HSS metal drill assortment

Per pkg. Set contents Part No.

5pcs. 4 x 75, 5 x 86, 6 x 93, 8 x 117, 10 x 133mm
D-30508
Assortment (1pc.each)
19pcs. 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
D-29876
Assortment 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm(1pc. each)
25pcs. 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5,
D-29882
Assortment 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm(1pc. each)
Accessories 23
Range
Step drill bit Speed

(Wood/Metal)
Drilling
3 4
Spiral flute Spiral flute
Bright finish TiN coating
200

1 2
Straight flute Straight flute
Bright finish TiN coating
100

Life
100 250
Material chart Recommended Acceptable
Material
Description Flute Surface Shank * Non-ferrous
Plastic Sheet steel Alloy steel Cast iron
metal
Straight Bright finish
1
Three flat or
Straight Titanium coating 1/4”Hex
2

Spiral Bright finish

3

Spiral Titanium coating

4

* Non-ferrous metal (Such as Copper, Nickel and Zinc)

Countersink bit

Material chart Recommended Acceptable

Material
Description Made of Type Shank *Non-ferrous Stainless
Wood Plastic Cast iron Alloy steel
metal steel
7cutting edge Alloy steel
1/4”Hex

Shallow sinking
5cutting edge
Straight
Suitable for flat shank
countersinking.
High speed steel

3cutting edge
1/4”Hex
(C-form)

Deep sinking
3cutting edge
Suitable for deep Straight
countersinking. shank

Slanting hole High speed steel Shallow

sinking Straight
shank
Suitable for
flat countersinking.
It's for higher heat and abrasion resistance. Especially in thin
Suitable for drilling tough metal. (Cobalt content 5%) metal sheets.
*Non-ferrous metal (Such as Copper, Nickel and Zinc)
Cone drill bit Step drill bit spiral flute

Type MZ
Bit Overall Working
Straight shank (Three flat) Per
diameter length length Shank type Part No.
Bit Overall Working pkg.
Per (mm) (mm) (mm)
diameter length length Shank type Part No.
pkg. 4-12 65 45 1/4''Hex(MZ) 1 D-40141
(mm) (mm) (mm)
Straight 4-20 75 53 1/4''Hex(MZ) 1 D-40157
3-14 58 38 1 D-40048
(Three flat)
Type NZ     
Straight
4-20 71 51 1 D-40054
(Three flat) 4-12 65 45 1/4''Hex(NZ) 1 D-46458
4-20 75 53 1/4''Hex(NZ) 1 D-46464

Cone drill bit Straight shank (Three flat)   

Straight
4-32 102 80 1 D-40163
(Three flat)

Step drill bit spiral flute titanium coating

Straight shank (Three flat)
Bit Overall Working
Per
diameter length length Shank type Part No.
pkg.
(mm) (mm) (mm)
Type MZ
Straight
16-30.5 76 51 1 D-40060 Bit Overall Working
(Three flat) Per
Straight diameter length length Shank type Part No.
24-40 89 64 1 D-40076 pkg.
(Three flat) (mm) (mm) (mm)
4-20 75 53 1/4''Hex(MZ) 1 D-40185
4-12 65 45 1/4''Hex(MZ) 1 D-40179
Step drill bit straight flute
Type NZ     
4-12 65 45 1/4''Hex(NZ) 1 D-46470
4-20 75 53 1/4''Hex(NZ) 1 D-46486
Straight shank (Three flat)   
Straight
4-32 102 80 1 D-40191
Type MZ (Three flat)
Bit Overall Working
Per
diameter length length Shank type Part No.
pkg.
(mm) (mm) (mm) Step drill bit straight flute titanium coating
4-12 65 45 1/4''Hex(MZ) 1 D-40082
4-20 75 53 1/4''Hex(MZ) 1 D-40098
Type NZ     
4-12 65 45 1/4''Hex(NZ) 1 D-46414 Size: inch
4-20 75 53 1/4''Hex(NZ) 1 D-46420 Type MZ

Straight shank (Three flat)      Bit Overall Working Per

Shank type Part No.
diameter length length pkg.
Straight
4-32 102 80 1 D-40107
(Three flat) 1/8''-1/2'' 3-9/32'' 2-1/2'' 1/4''Hex(MZ) 1 B-31011
3/16''-1/2'' 3-9/32'' 2-1/2'' 1/4''Hex(MZ) 1 B-31027
Step drill bit straight flute titanium coating Straight shank (Three flat)    
Straight
3/16''-7/8'' 3'' 2'' 1 B-31033
(Three flat)
Straight
1/4''-3/4'' 2-5/8'' 1-3/4'' 1 B-31049
(Three flat)
Straight
1/4''- 1-3/8'' 3'' 2-1/8'' 1 B-31055
(Three flat)
Type MZ
Bit Overall Working
Per
diameter length length Shank type
pkg.
Part No. Step drill bit straight flute titanium coating
(mm) (mm) (mm)
4-12 65 45 1/4''Hex(MZ) 1 D-40113
4-20 75 53 1/4''Hex(MZ) 1 D-40129
Type NZ     
Size: inch
4-12 65 45 1/4''Hex(NZ) 1 D-46436 Straight shank (Three flat)
4-20 75 53 1/4''Hex(NZ) 1 D-46442 Bit Overall Working Per
Shank type Part No.
Straight shank (Three flat)      diameter length length pkg.

Straight Straight
4-32 102 80 1 D-40135 7/8'' 2-3/16'' 1-3/16'' 1 B-31083
(Three flat) (Three flat)
Straight
9/16''-1'' 2-1/2'' 1-1/2'' 1 B-31061
(Three flat)
Straight
13/16''- 1-3/8'' 3'' 2'' 1 B-31077
(Three flat)
Step drill bit straight flute titanium coating Countersink bit with five 90° cutting edges

Size: inch Bit Overall

Type MZ diameter length Per pkg. Application Part No.
Bit Overall Working Per (mm) (mm)
Shank type Part No.
diameter length length pkg. 6 48 1 M3 D-37378

1/8''-1/2'' 3-9/32'' 2-1/2'' 1/4''Hex(MZ) 1 B-31099 8 48 1 M4 D-37384

3/16''-1/2'' 3-9/32'' 2-1/2'' 1/4''Hex(MZ) 1 B-31108 10 40 1 M5 D-37390

Straight shank (Three flat)      12 40 1 M6 D-37409

Straight 16 43 1 M8 D-37415
3/16''-7/8'' 3'' 2'' 1 B-31114
(Three flat)
20 45 1 M10 D-37421
Straight
1/4''-3/4'' 2-5/8'' 1-3/4'' 1 B-31120
(Three flat)
Straight
1/4''- 1-3/8'' 3'' 2-1/8'' 1 B-31136 Countersink bit with three 90° cutting edges
(Three flat)

Step drill bit spiral flute sitanium coating 3pcs. set

Bit Overall
diameter length Per pkg. Application Part No.
(mm) (mm)
6.3 45 1 M3 D-37437
8.3 50 1 M4 D-37443
Bit Overall Working Per
Shank type Part No. 10.4 50 1 M5 D-37459
diameter length length pkg.
12.4 56 1 M6 D-37465
4-12 65 45 1/4''Hex(MZ) 1
16.5 60 1 M8 D-37471
4-20 75 53 1/4''Hex(MZ) 1 D-41872
20.5 63 1 M10 D-37487
Straight
4-32 102 80 1
(Three flat) 25 67 1 M12 D-37493

Countersink bit with seven 90° cutting edges Slanting hole countersink bit

1/4'' Hex. shank

Bit Overall Bit Overall
diameter length Per pkg. Application Part No. diameter length Per pkg. Application Part No.
(mm) (mm) (mm) (mm)
13 50 1 - D-37306 2-5 45 1 - D-37502
5-10 48 1 - D-37518
10-15 65 1 - D-37524
Countersink bit with three 90° cutting edges
15-20 85 1 - D-37530

Countersink bit with five 82° cutting edges

1/4'' Hex. Shank C-form

Bit Overall
diameter length Per pkg. Application Part No.
(mm) (mm)
Size: inch
6.3 31 1 M3 D-37312
Bit Overall
8.3 31 1 M4 D-37328 Per pkg. Application Part No.
diameter length
10.4 34 1 M5 D-37334
1/2'' 1-5/8'' 1 - B-30003
12.4 35 1 M6 D-37340
5/8'' 1-3/4'' 1 - B-30019
16.5 40 1 M8 D-37356
3/4'' 1-3/4'' 1 - B-30025
20.5 41 1 M10 D-37362
Countersink bit titanium coating with five 82° cutting edges 3 pc. Countersink with drill bit set (with Hex wrench)

Size: inch
Size: inch
Type MZ
Bit Overall
Per pkg. Application Part No.
diameter length Per pkg. Set contents Part No.
1/2'' 1-5/8'' 1 - B-30031
9/64''(#6), 11/64''(#8), 3/16''(#10)
3 A-99661
5/8'' 1-3/4'' 1 - B-30047 (Comes with hex wrench)
3/4'' 1-3/4'' 1 - B-30053

Countersink with drill bit (with Hex wrench)

Countersink bit with five 82° cutting edges

Size: inch

Type MZ

Size: inch Bit Overall

Per pkg. Application Part No.
Type MZ diameter length

Bit Overall 9/64'' 3-5/8'' 1 #6 A-99677

Per pkg. Application Part No.
diameter length
11/64'' 4'' 1 #8 A-99683
1/2'' 2'' 1 - B-30069
3/16'' 4-1/4'' 1 #10 A-99699
5/8'' 2'' 1 - B-30075
7/32'' 4-1/2'' 1 #12 A-99708
3/4'' 2'' 1 - B-30081

Countersink bit titanium coating with five 82° cutting edges Countersink replacement drill bit

Size: inch

Type MZ

(1/4'' Hex. Shank E-form) Bit Overall

Size: inch Per pkg. Application Part No.
diameter length
Type MZ
Bit Overall 9/64'' 3-5/8'' 1 #6 A-99714
Per pkg. Application Part No.
diameter length
11/64'' 4'' 1 #8 A-99720
1/2'' 2'' 1 - B-30097
3/16'' 4-1/4'' 1 #10 A-99736
5/8'' 2'' 1 - B-30106
7/32'' 4-1/2'' 1 #12 A-99742
3/4'' 2'' 1 - B-30112

Countersink bit with three 90° cutting edges 6pcs.

metal box set

Bit
Overall
diameter Per pkg. Application Part No.
length (mm)
(mm)
6.3 45 1 M3
8.3 50 1 M4
10.4 50 1 M5
D-42204
12.4 56 1 M6
16.5 60 1 M8
20.5 63 1 M10
Accessories 27

Wood drill bit series

(Wood/Metal)
Drilling
Material
Wood Wood with nail Plywood
Description Point Shank Diameter
Thickness

Flat bit Suitable for drilling holes with Brad point Straight
medium to large diameters in soft 6 - 36mm
wood or soft plastic. 1/4" - 1-1/2"
It's simple made and reasonable
price. It's popular especially in AA
America. 1/4"Hex

1/4" - 1-1/4"

Wood drill bit This is the most popular drill in wood Straight
Brad point
drill and suitable for drilling holes 3 - 20mm
with small to medium diameter. Able 1/8" - 3/4"
to drill soft plastics other than
general wood. Highly effective for AA A
boring more clean and precise holes 1/4"Hex
than flat bit.
3 - 15mm

Single spur auger bit Suitable for drilling of deep holes Auger Hex
with medium to large diameters thread 6 - 30mm
holes in soft and hard wood. 1/4" - 1-1/4"
Threaded screw point pull the bit into
the work piece providing a fast, easy AA A
to use self feeding action. Highly 1/4"Hex
effective for boring more clean and 6 - 21mm
precise holes than flat bit or wood
drill.

Ship auger bit Suitable for knotty nail embedded Auger 5/16"&
wood which unable to drill with thread 7/16"Hex
single spur. Suitable for plumbing
and electrical installation, etc. 10 - 38mm
3/8" - 1-1/2" A AA A

Formwork drill Can be used on formboard or 2x4 Chisel edge Straight

timbers at once because of their long
overall length (400 & 600mm)

8 - 30mm A A AA

Suitable for drilling large diameter Auger 7/16"Hex

Self feeding bit
holes for pipe and conduit in wood. thread
Threaded screw point pull the bit into
the work piece providing a fast, easy
to use self feeding action. Suitable for 1” - 3” AA
plumbing and electrical installation,
etc.

Forstner drill bit Suitable for drilling of blind holes or Brad point Straight
penetrating holes of medium to large (Short)
diameter with high quality. Suitable
for precise working like a making 10 - 50mm
furniture. 1/4" - 2-1/8" AA

Adjustable circle cutter Adjustable drilling diameter and able Chisel edge Straight
to work on plaster board mainly.
Suitable for plumbing and
installation of the downlight.
30 - 200mm A A
Flat bit Wood drill bit

Bit Overall Bit Overall

Working length
diameter length Part No. diameter length Part No.
(mm)
(mm) (mm) (mm) (mm)
6 150 D-07674 3 60 33 D-07026
8 150 D-07680 4 75 43 D-07032
10 150 D-07696 5 85 52 D-07048
12 150 D-07705 6 95 57 D-07054
13 150 D-67614 7 110 69 D-07060
14 150 D-07711 8 115 75 D-07076
15 150 D-07727 9 125 81 D-07082
16 150 D-07733 10 135 87 D-07098
18 150 D-07749 12 155 101 D-07107
20 150 D-07755 13 151 96 D-53453
22 150 D-07761 14 170 108 D-07113
24 150 D-07777 15 160 100 D-53469
25 150 D-07783 16 180 105 D-07129
26 150 D-07799 18 200 120 D-07135
28 160 D-07808 20 200 130 D-07141
30 160 D-07814 6 315 160 D-07157
32 160 D-07820 8 315 160 D-07163
34 160 D-07836 10 315 160 D-07179
35 160 D-07842 12 315 160 D-07185
36 160 D-07858 14 315 160 D-07191
Size: inch 16 315 160 D-07200
Bit Overall 18 335 160 D-07216
Part No.
diameter length 20 335 160 D-07222
1/4'' 6'' D-24505 Size: inch
5/16'' 6'' D-24511 Bit Overall
Working length Part No.
3/8'' 6'' D-24527 diameter length
7/16'' 6'' D-24533 1/8'' 2-3/4'' 1-5/16'' D-23189
1/2'' 6'' D-26490 5/32'' 3-1/8'' 1-3/4'' D-23195
9/16'' 6'' D-24549 3/16'' 3-1/2'' 2'' D-23204
5/8'' 6'' D-24561 1/4'' 4'' 2-9/16'' D-23210
11/16'' 6'' D-24577 9/32'' 4-1/4'' 2-3/4'' D-23226
3/4'' 6'' D-24583 5/16'' 4-1/2'' 3'' D-23232
7/8'' 6'' D-24599 11/32'' 4-3/4'' 3'' D-23248
15/16'' 6'' D-24608 3/8'' 5-1/8'' 3-11/32'' D-23254
1'' 6'' D-24614 7/16'' 5-5/8'' 3-3/4'' D-23260
1-1/8'' 6-1/2'' D-24636 1/2'' 6-5/8'' 3-3/4'' D-23276
1-1/4'' 6-1/2'' D-24658 5/8'' 7'' 4-3/4'' D-23282
1-3/8'' 6-1/2'' D-24670 11/16'' 8'' 5-7/8'' D-23298
1-1/2'' 6-1/2'' D-26509 3/4'' 8'' 5-7/8'' D-23307
1/4'' 12'' 6'' D-23101
5/16'' 12'' 6'' D-23117
Flat bit with 1/4'' Hex. shank
3/8'' 12'' 6'' D-23123
7/16'' 12'' 6'' D-23139
1/2'' 12'' 6'' D-23145
5/8'' 12'' 6'' D-23151
Type MZ 11/16'' 13'' 6-5/16'' D-23167
Bit Overall 3/4'' 13'' 6-5/16'' D-23173
Shank Type Per pkg. Part No.
diameter length

1/4'' 6'' MZ 1 D-23955

Wood drill bit assortment
3/8'' 6'' MZ 1 D-23961
1/2'' 6'' MZ 1 D-23977
5/8'' 6'' MZ 1 D-23983
3/4'' 6'' MZ 1 D-23999
7/8'' 6'' MZ 1 D-24000
1'' 6'' MZ 1 D-24016
Per pkg. Set contents Part No.
1-1/4'' 6'' MZ 1 D-24022
5pc. Assortment 4, 5, 6, 8, 10 mm (1pc.each) D-57211

8pc. Assortment 3, 4, 5, 6, 7, 8, 9, 10 mm (1pc.each) D-57227

 Bit Overall
Brad point wood drill bit with 1/4'' Hex. shank diameter length
Working length
Part No.
(mm)
(mm) (mm)
20 250 180 D-07406
22 250 180 D-07412

Type MZ 24 250 180 D-07428

Bit Overall Working 8 400 330 D-07434
Shank
diameter length length Per pkg. Part No. 10 400 330 D-07440
Type
(mm) (mm) (mm)
12 400 330 D-07456
2 69 24 MZ 1 D-62371
14 400 330 D-07462
3 75 33 MZ 1 D-15861
16 400 330 D-07478
4 90 43 MZ 1 D-15877
18 400 330 D-07484
5 100 52 MZ 1 D-15883
20 400 330 D-07490
6 110 57 MZ 1 D-15899
22 400 330 D-07509
8 115 75 MZ 1 D-15908
24 400 330 D-07515
10 130 87 MZ 1 D-15914
26 400 330 D-07521
12 150 101 MZ 1 D-15920
28 400 330 D-07537
15 160 108 MZ 1 D-15936
30 400 330 D-07543
Type NZ
8 450 380 D-07559
3 78 33 NZ 1 D-31245
10 450 380 D-07565
4 92 43 NZ 1 D-31251
12 450 380 D-07571
5 103 52 NZ 1 D-31267
13 450 380 D-53497
6 110 57 NZ 1 D-31273
14 450 380 D-07587
8 117 75 NZ 1 D-31289
15 450 380 D-53506
10 133 87 NZ 1 D-31295
16 450 380 D-07593
12 151 101 NZ 1 D-31304
18 450 380 D-07602
15 162 108 NZ 1 D-31310
20 450 380 D-07618
22 450 380 D-07624
Brad point wood drill bit with 1/4'' Hex. shank 24 450 380 D-07630
assortment 26 450 380 D-07646
28 450 380 D-07652
30 450 380 D-07668
Size: inch
Bit Overall
Working length Part No.
diameter length
1/4'' 8'' 5-1/8'' D-23313
Type MZ 5/16'' 8'' 5-1/8'' D-23329
Per pkg. Set contents Part No. 3/8'' 8'' 5-1/8'' D-23335
7pc. Assortment 2, 3, 3, 4, 5, 6, 8, mm D-62371 1/2'' 8'' 5-1/8'' D-23341
9/16'' 8'' 5-1/8'' D-23357
5/8'' 8'' 5-1/8'' D-23363
Single spur auger bit with straight shank 11/16'' 8'' 5-1/8'' D-23379
3/4'' 8'' 5-1/8'' D-23385
7/8'' 8'' 5-1/8'' D-23391
15/16'' 8'' 5-1/8'' D-23400
Bit Overall 1/4'' 10'' 7'' D-23416
Working length
diameter length Part No. 5/16'' 10'' 7'' D-23422
(mm)
(mm) (mm)
3/8'' 10'' 7'' D-23438
6 200 130 D-07238
1/2'' 10'' 7'' D-23444
8 200 130 D-07244
9/16'' 10'' 7'' D-23450
10 200 130 D-07250
5/8'' 10'' 7'' D-23466
12 200 130 D-07266
11/16'' 10'' 7'' D-23472
14 200 130 D-07272
3/4'' 10'' 7'' D-23488
16 200 130 D-07288
7/8'' 10'' 7'' D-23494
18 200 130 D-07294
15/16'' 10'' 7'' D-23503
20 200 130 D-07303
5/16'' 16'' 13'' D-23519
22 200 130 D-07319
3/8'' 16'' 13'' D-23525
24 200 130 D-07325
1/2'' 16'' 13'' D-23531
6 250 180 D-07331
9/16'' 16'' 13'' D-23547
8 250 180 D-07347
5/8'' 16'' 13'' D-23553
10 250 180 D-07353
11/16'' 16'' 13'' D-23569
12 250 180 D-07369
3/4'' 16'' 13'' D-23575
13 250 180 D-53475
7/8'' 16'' 13'' D-23581
14 250 180 D-07375
15/16'' 16'' 13'' D-23597
15 250 180 D-53481
1'' 16'' 13'' D-23606
16 250 180 D-07381
1-1/8'' 16'' 13'' D-23612
18 250 180 D-07397
 Bit Overall Bit Overall
Working length Part No. Working length Part No.
diameter length diameter length
1-1/4'' 16'' 13'' D-23628 3/4'' 6'' 3-1/2'' D-35732
5/16'' 18'' 15'' D-23634 13/16'' 6'' 3-1/2'' D-35748
3/8'' 18'' 15'' D-23640 7/8'' 6'' 3-1/2'' D-35754
1/2'' 18'' 15'' D-23656
15/16'' 6'' 3-1/2'' D-35760
9/16'' 18'' 15'' D-23662
1'' 6'' 3-1/2'' D-35776
5/8'' 18'' 15'' D-23678
1-1/16'' 6'' 3-1/2'' D-35782
11/16'' 18'' 15'' D-23684
1-1/8'' 6'' 3-1/2'' D-35798
3/4'' 18'' 15'' D-23690
7/8'' 18'' 15'' D-23709 1-1/4'' 6'' 3-1/2'' D-35807

15/16'' 18'' 15'' D-23715 1-3/8'' 6'' 3-1/2'' D-35813

1'' 18'' 15'' D-23721 1-1/2'' 6'' 3-1/2'' D-35829
1-1/8'' 18'' 15'' D-23737 3/8'' 18'' 15'' D-35835
1-1/4'' 18'' 15'' D-23743 7/16'' 18'' 15'' D-35841
1/2'' 18'' 15'' D-35857
Ship auger bit with 7/16'' Hex. shank 9/16'' 18'' 15'' D-35863
*5/16''Hex. Shank 5/8'' 18'' 15'' D-35879
Nail cutting type
11/16'' 18'' 15'' D-35885
3/4'' 18'' 15'' D-35891
13/16'' 18'' 15'' D-35900
7/8'' 18'' 15'' D-35916
Bit Overall
Working length
diameter length Part No. 15/16'' 18'' 15'' D-35922
(mm)
(mm) (mm) 1'' 18'' 15'' D-35938
10 165 90 *D-36055
1-1/16'' 18'' 15'' D-35944
12 165 90 *D-36061
1-1/8'' 18'' 15'' D-35950
14 165 90 D-36077
1-1/4'' 18'' 15'' D-35966
16 165 90 D-36083
1-3/8'' 18'' 15'' D-35972
18 165 90 D-36099
1-1/2'' 18'' 15'' D-35988
20 165 90 D-36108
22 165 90 D-36114
24 165 90 D-36120
Auger bit with 1/4'' Hex. shank
26 165 90 D-36136
28 165 90 D-36142
30 165 90 D-36158
Type MZ
32 165 90 D-36164
Bit Overall Working
Shank
35 165 90 D-36170 diameter length length Per pkg. Part No.
Type
(mm) (mm) (mm)
38 165 90 D-36186
6 200 130 MZ 1 D-15992
10 470 380 D-36192
8 200 130 MZ 1 D-16003
12 470 380 D-36201
10 200 130 MZ 1 D-16019
14 470 380 D-36217
12 200 130 MZ 1 D-16025
16 470 380 D-36223
14 200 130 MZ 1 D-16031
18 470 380 D-36239
16 200 130 MZ 1 D-16047
20 470 380 D-36245
18 200 130 MZ 1 D-16053
22 470 380 D-36251
20 200 130 MZ 1 D-16069
24 470 380 D-36267
21 200 130 MZ 1 D-16075
26 470 380 D-36273
Type NZ
28 470 380 D-36289
6 200 130 NZ 1 D-31326
30 470 380 D-36295
8 200 130 NZ 1 D-31332
32 470 380 D-36304
10 200 130 NZ 1 D-31348
35 470 380 D-36310
12 200 130 NZ 1 D-31354
38 470 380 D-36326
14 200 130 NZ 1 D-31360
Size: inch
16 200 130 NZ 1 D-31376
Bit Overall
Working length Part No.
diameter length 18 200 130 NZ 1 D-31382

3/8'' 6'' 3-1/2'' *D-35673 20 200 130 NZ 1 D-31398

7/16'' 6'' 3-1/2'' *D-35689 21 200 130 NZ 1 D-31407

1/2'' 6'' 3-1/2'' *D-35695

9/16'' 6'' 3-1/2'' D-35704
5/8'' 6'' 3-1/2'' D-35710
11/16'' 6'' 3-1/2'' D-35726
Formwork drill bit Self feeding bit with 7/16'' Hex. shank

Bit diameter Part No.

Bit Overall Working
1''(25mm) D-29935
diameter length length Per pkg. Part No.
(mm) (mm) (mm) 1-1/8''(28mm) D-29957
8 400 75 1 D-70219
1-1/4''(32mm) D-29963
10 400 87 1 D-70225
1-3/8''(35mm) D-29979
12 400 101 1 D-70231
14 400 108 1 D-70247 1-1/2''(38mm) D-29985

16 400 100 1 D-70253 1-3/4''(45mm) D-29991

18 400 100 1 D-70269 2''(51mm) D-30003
20 400 100 1 D-70275 2-1/8''(54mm) D-30019
22 400 100 1 D-70281
2-1/4''(57mm) D-30025
24 400 100 1 D-70297
2-9/16''(65mm) D-30031
26 400 100 1 D-70306
28 400 100 1 D-70312 3''(76mm) D-30047

30 400 100 1 D-70328

8 600 75 1 D-70334 Screw point
10 600 87 1 D-70340
12 600 101 1 D-70356
14 600 108 1 D-70362
For self feeding bit size Per pkg. Part No.
16 600 100 1 D-70378
1''- 2-9/16'' 10 D-30156
18 600 100 1 D-70384
3'' 10 D-30162
20 600 100 1 D-70390
22 600 100 1 D-70409
24 600 100 1 D-70415 Extension bar
26 600 100 1 D-70421
28 600 100 1 D-70437
30 600 100 1 D-70443

Size Per pkg. Part No.

Shiitake drill spiral type 5-1/2''(140mm) 1 D-35645

12''(305mm) 1 D-35651

18''(457mm) 1 D-35639

7 pcs. Self Feeding bit set

Bit diameter (1pc.each)
1''(25mm), 1-1/4''(32mm), 1-1/2''(38mm)
2''(51mm), 2-9/16''(65mm), 3''(76mm)

Extension bar 5-1/2''(140mm)(1each)

Screw point 1-1/4'' x 2''(3 pcs.)
Screw point 3/8'' x 2''-3/4''(1pc.)
Bit Overall Hex wrench (2 pcs.)
Working length
diameter length Part No. Replacement screw (2 pcs.)
(mm)
(mm) (mm)
12 80 45 B-49747

Shiitake drill stopper type

Part No.

D-36005

Bit Overall
Working length
diameter length Part No.
(mm)
(mm) (mm)
12 76 36 B-49753
Forstner bit Spare blade

Bit diameter (mm) Part No. Bit diameter Part No.

10 D-41844 30 D-42260

15 D-41925 32 D-42276

20 D-42232 35 D-42282

25 D-42248 40 D-42298
Per pkg. Part No.
26 D-42254 50 D-42307
2 D-57118
Size: inch
Bit diameter Part No. Bit diameter Part No.

1/4'' D-50588 1-1/4'' D-50669

3/8'' D-50594 1-3/8'' D-50675

1/2'' D-50603 1-1/2'' D-50681

5/8'' D-50619 1-5/8'' D-50697

3/4'' D-50625 1-3/4'' D-50706

7/8'' D-50631 1-7/8'' D-50712

1'' D-50647 2'' D-50728

1-1/8'' D-50653 2-1/8'' D-50734

Forstner bit 5pc. set with wooden case

Bit diameter
15mm, 20mm, 25mm, 30mm, 35mm

Part No.

D-47363

Adjustable circle cutter

Size(mm) Part No.

30-120 D-57093

30-200 D-57102
Accessories 33

Holesaw

(Wood/Metal)
Drilling
Ezychange BiM holesaw BiM holesaw BiM holesaw for sheet metal

Variable pitch The stopper absorbs the Ejector spring

Variable pitch impact when hole saw goes
Ezychange adapter Standard adapter through materials

HSS Bi-Metal
HSS Bi-Metal with Co 8% HSS Bi-Metal with Co 8%
Variable pitch

Multi purpose TCT holesaw TCT holesaw TCT grit holesaw

Thanks to edged-less The many large grains
form, wood swarf is (#20∼30) enable a
TCT ejected rapidly. speedy and smooth
TCT Prevent overplus cutting
drilling.

Standard Adapter

Material chart Recommended Acceptable

Steel Inox Alumi- Non Wood MDF PLASTER PVC FRP SOFT Brick Lime Marble
Stainless num ferrous BOARD TILE stone
Metal
Application

Ezy BiM

BiM

BiM for sheet metal

Multi purpose TCT

TCT

TC grit

Vacuum brazed diamond

Diamond wet holesaw

holesa

Carbide Steel
Ezychange BiM holesaw Ezychange BiM holesaw assortment
Tool-less change of pilot drill and holesaw (dia.14-152mm) in the Ezychange
adaptor.

Working Working Description Part No.

Size(mm) length Part No. Size(mm) length Part No. 19,22,29,38,44,57mm, Ezychange adapter,
(mm) (mm) B-11966
HSS-G pilot drill bit
16 40 B-11265 56 40 B-31756 16,20,25,32,40,51mm, Ezychange adapter,
B-11972
17 40 B-31706 57 40 B-11411 HSS-G pilot drill bit
20,25,32,40,51,65mm, Ezychange adapter,
19 40 B-11271 60 40 B-11427 B-11988
HSS-G pilot drill bit
20 40 B-11287 64 40 B-11433 25,32,40,51,65,68,76mm, Ezychange adapter,
B-18188
HSS-G pilot drill bit x2pcs.
22 40 B-11293 65 40 B-16760
24 40 B-11302 68 40 B-11449
25 40 B-11318 70 40 B-11455
BiM hole saw
Hole saws have 4/6 variable pitch tooth design and are recommended for cutting,
27 40 B-31712 73 40 B-31762 steel plates, aluminium, copper, brass, wood and plastic.
29 40 B-11324 76 40 B-11461
30 40 B-11330 79 40 B-31778
32 40 B-11346 83 40 B-11477
35 40 B-11352 86 40 B-31784
37 40 B-31728 92 40 B-11483
38 40 B-11368 95 40 B-31790 Working Working
40 40 B-16754 102 40 B-11499 Size(mm) length Part No. Size(mm) length Part No.
(mm) (mm)
41 40 B-11374 105 40 B-11508 14 38 D-35368 57 38 D-17099
44 40 B-11380 111 40 B-31809
16 38 D-16994 59 38 D-35499
46 40 B-31734 114 40 B-31815
17 38 D-35374 60 38 D-25688
48 40 B-11396 121 40 B-31821
19 38 D-17005 64 38 D-30140
51 40 B-11405 127 40 B-11514
20 38 D-17251 65 38 D-24882
52 40 B-31740 140 40 B-31837
21 38 D-35380 67 38 D-35508
54 40 B-18194 152 40 B-11520 22 38 D-17011 68 38 D-17108
24 38 D-17027 70 38 D-25694
Accessories for Ezychange BiM holesaw 25 38 D-17033 73 38 D-35514
27 38 D-35396 76 38 D-17114
Pilot drill 29 38 D-17267 79 38 D-35520
30 38 D-35405 80 38 D-33869
32 38 D-17049 83 38 D-17120
33 38 D-35411 86 38 D-35536
Adapter
35 38 D-17055 89 38 D-35542
37 38 D-35427 92 38 D-17136
38 38 D-17061 95 38 D-35558
Description Part No.
40 38 D-17273 98 38 D-35564
Ezychange adapter + HSS-G pilot drill bit B-11536
41 38 D-35433 102 38 D-35570
HSS-G pilot drill bit B-11542
43 38 D-35449 105 38 D-17142
Ezychange transition adapter
B-16271
for 14-30mm x 3, for 32-152mm x 3 44 38 D-17077 108 38 D-35586
Ezychange SDS-PLUS adapter without pilot drill B-31902 46 38 D-35455 111 38 D-35592
48 38 D-35461 114 38 D-35601
51 38 D-17083 121 38 D-35617
52 38 D-35477 127 38 D-17158
54 38 D-24876 140 38 D-35623
56 38 D-35483 152 38 D-17164
Accessories for BiM hole saw BiM holesaw for sheet metal
Use with adapter with HSS pilot dril
Pilot drill

Adapter

Working Working
Size(mm) length Part No. Size(mm) length Part No.
Application Fits holesaws Part No. (mm) (mm)
Adapter with pilot drill   16 20 B-29670 51 20 B-29854
17 20 B-29686 54 20 B-29860
For 10mm drill 14 - 29mm D-17170
19 20 B-29692 57 20 B-29876
For 13mm drill 32 - 152mm D-17186
20 20 B-29701 60 20 B-29882
For SDS-PLUS Hammer 14 - 29mm D-17603 21 20 B-29717 64 20 B-29898
For SDS-PLUS Hammer 32 - 76mm D-17619 22 20 B-29723 65 20 B-35994
Pilot drill 25 20 B-29739 67 20 B-36005

Length 71mm All D-17192 27 20 B-29745 68 20 B-36011

29 20 B-29751 70 20 B-36027
30 20 B-29767 73 20 B-36033
BiM holesaw assortment 32 20 B-29773 76 20 B-36049
Most six common sizes for Plumber & Electrician.
33 20 B-29789 79 20 B-36055
35 20 B-29795 83 20 B-36061
A: 11mm (*7/16'') 38 20 B-29804 86 20 B-36077
Adapter with pilot drill 40 20 B-29810 89 20 B-36083
41 20 B-29826 102 20 B-36099
B: 9.5mm (*3/8'')
Adapter with pilot drill 44 20 B-29832 127 20 B-36108
48 20 B-29848 152 20 B-36114
C: Ejector spring
Suitable for Included holesaws (1 each) Part No.
19,22,29,38,44,57mm,adapter A, adapter B, Accessories for BiM holesaw for sheet metal
For Plumber D-47117
ejecter spring
16,20,25,32,40,51mm,adapter A, adapter B, Adapter with HSS pilot dril
For Electrician D-47123
ejecter spring
20,25,32,40,51,65mm,adapter A, adapter B,
For Electrician D-47139
ejecter spring

Pilot dril

Application Fits holesaws Part No.

Adapter with pilot drill

For 10mm drill 16 - 35mm B-36120

Suitable for Included holesaws (1 each) Part No.
For 13mm drill 38 - 152mm B-36136
19,22,25,29,35,38, 44,51,57,68,75mm,
For Plumber D-47298
adapter A, adapter B, ejecter spring Pilot drill
19,22,25,29,35,38, 44,51,57,65,75mm,
For Plumber D-50572 Length 60mm All B-36142
adapter A, adapter B, ejecter spring
19,22,29,35,38,51,54,57,68mm,
For Electrician D-47282
adapter A, adapter B, ejecter spring
For General Use
16,19,22,25,32,35,37,44,51,57,64,68,76mm,
D-47307 BiM holesaw for sheet metal assortment
adapter A, adapter B, ejecter spring

Suitable for Included holesaws (1 each) Part No.

Suitable for Included Hole saws (1 each) Part No.
19,22,29,38,44,57mm,adapter A, adapter B,
For Plumber D-63965 19,22,29,38,44,57mm holesaws
ejecter spring
19,22,25,29,35,38, 44,51,57,65,75mm, For Plumber 9.5/11mm adapters with drill 1pc. of pilot B-38663
For Plumber D-63971 drill
adapter A, adapter B, ejecter spring
19,22,29,35,38,51,54,57,68mm, 20,25,32,38,51,64mm Holesaw
For Electrician D-63987 For Electrician 9.5/11mm adapters with drill 1pc. Of pilot B-38679
adapter A, adapter B, ejecter spring
16,19,22,25,32,35,37,44,51,57,64,68,76mm, drill
For General Use D-63993
adapter A, adapter B, ejecter spring
 Type of pilot
Multi purpose TCT Hole saw Application
drill
Fits holesaws Part No.
Use with adapter with pilot drill
Pilot drill   
HSS pilot drill
HSS 22-105mm D-50413
φ8mmx100mm
TCT pilot drill φ10x100mm TCT 22-105mm D-50429
mm HSS pilot drill φ6.35x90mm HSS 19mm D-50435
Working Working
Size Size TCT pilot drill φ8x90mm TCT 19mm D-50441
length Part No. length Part No.
(mm) (mm) inch
(mm) (mm)
Type of pilot
19 50 D-42678 60 60 D-42830 Application Fits holesaws Part No.
drill
22 60 D-42684 64 60 D-42846
Adapter with pilot drill
25 60 D-42690 65 60 D-42852
For 13mm drill TCT 22-105mm D-52087
29 60 D-42709 67 60 D-42868
For SDS-PLUS Hummer TCT 22-32mm D-52093
30 60 D-42715 68 60 D-42874
For 13mm drill TCT 19mm D-52102
32 60 D-42721 70 60 D-42880
For SDS-PLUS Hummer TCT 19mm D-52118
35 60 D-42737 73 60 D-45026
For 13mm drill HSS 22-105mm D-52124
38 60 D-42743 76 60 D-45032 For SDS-PLUS Hummer HSS 22-32mm D-52130
40 60 D-42759 79 60 D-45048 For 13mm drill HSS 19mm D-52146
45 60 D-42765 80 60 D-45331 For SDS-PLUS Hummer HSS 19mm D-52152
48 60 D-42771 83 60 D-45347 Pilot drill
50 60 D-42787 85 60 D-45353 HSS pilot drill
HSS 22-105mm D-52168
51 60 D-42793 89 60 D-45369 φ8mmx100mm
54 60 D-42802 95 60 D-50304 TCT pilot drill φ10x100mm TCT 22-105mm D-52174
55 60 D-42818 102 60 D-50310 HSS pilot drill φ6.35x90mm HSS 19mm D-52180

57 60 D-42824 105 60 D-50326 TCT pilot drill φ8x90mm TCT 19mm D-52196
inch
Working Working
Size
length Part No.
Size
length Part No. TCT Hole saw assortment
(inch) (inch)
(mm) (mm)
3/4'' 2'' D-51764 2-3/8'' 2-3/8'' D-51926
7/8'' 2-3/8'' D-51770 2-1/2'' 2-3/8'' D-51932
1'' 2-3/8'' D-51786 2-9/16'' 2-3/8'' D-51948
1-1/8'' 2-3/8'' D-51792 2-5/8'' 2-3/8'' D-51954
Suitable for Included TCT holesaw (1 each) Part No.
1-3/16'' 2-3/8'' D-51801 2-11/16'' 2-3/8'' D-51960
22,25,29,35,38,45,51mm, adapter㸸11mm
1-1/4'' 2-3/8'' D-51817 2-3/4'' 2-3/8'' D-51976 For Electrician (7/16'') hex, D-51281
1-3/8'' 2-3/8'' D-51823 2-7/8'' 2-3/8'' D-51982 T.C.T pilot drill, HSS pilot drill
1-1/2'' 2-3/8'' D-51839 3'' 2-3/8'' D-51998 22,35,51,57,64,76mm, Adapter㸸11mm
For General Use (7/16'') hex, D-51297
1-9/16'' 2-3/8'' D-51845 3-1/8'' 2-3/8'' D-52009 T.C.T pilot drill, HSS pilot drill
1-25/32'' 2-3/8'' D-51851 3-5/32'' 2-3/8'' D-52015
1-7/8'' 2-3/8'' D-51867 3-1/4'' 2-3/8'' D-52021
Tungsten carbide grit Hole saw
1-31/32'' 2-3/8'' D-51873 3-11/32'' 2-3/8'' D-52037
Use with Adapter with Pilot Drill
2'' 2-3/8'' D-51889 3-1/2'' 2-3/8'' D-52043
2-1/8'' 2-3/8'' D-51895 3-3/4'' 2-3/8'' D-52059
2-11/64'' 2-3/8'' D-51904 4'' 2-3/8'' D-52065
2-1/4'' 2-3/8'' D-51910 4-1/8'' 2-3/8'' D-52071
Size Working length (mm) Part No.
33mm (1-5/16'') 64 D-51188
Accessories for Multi purpose TCT Hole saw 43mm (1-11/16'') 64 D-51194
53mm (2-3/32'') 64 D-51203
For 13mm drill 63mm (2-1/2'') 64 D-51219
67mm (2-5/8'') 64 D-51225
73mm (2-7/8'') 64 D-51231
For SDS-PLUS Hummer 83mm (3-1/4'') 64 D-51247

mm
Application
Type of pilot
Fits holesaws Part No. Accessories for Tungsten carbide grit hole saw
drill
Adapter with pilot drill Adapter with TCT pilot dril
For 13mm drill TCT 22-105mm D-50332
For SDS-PLUS Hummer TCT 22-32mm D-50348 TCT pilot dril
For 13mm drill TCT 19mm D-50354
For SDS-PLUS Hummer TCT 19mm D-50360 Application Fits hole saws Part No.
For 13mm drill HSS 22-105mm D-50376 Adapter with Pilot Drill All D-51253
For SDS-PLUS Hummer HSS 22-32mm D-50382
Pilot drill All D-51269
For 13mm drill HSS 19mm D-50398
For SDS-PLUS Hummer HSS 19mm D-50407
TCT hole saw & Center drill Accessories for Diamond wet holesaw
High quality carbide tips brazed on to the cutting edge enable high speed drilling Adapter
of material up to 4mm in thickness with no coolant required.
Carbide tips are random-spaced to reduce chattering noise.
Not for percussion / hammering applications.
Retractable starter pilot bit

Shank Shank
Size Size
dia. Part No. dia. Part No.
(mm) (mm) Type of pilot
(mm) (mm) Application Fits holesaws Part No.
drill
16 6 B-00898 50 10 B-01046
Adapter
18 6 B-00907 55 10 B-01052
For 13mm drill - for 19-29mm D-61438
20 6 B-00913 60 13 B-01068
For 13mm drill - 32-83mm D-61444
21 6 B-00929 65 13 B-01074
Retractable starter pilot bit
22 6 B-00935 68 13 B-02652
For 13mm drill TCT All D-61450
25 10 B-00941 70 13 B-01080
27 10 B-00957 75 13 B-01096
28 10 B-00963 80 13 B-01105 Vacuum brazed diamond holesaw
30 10 B-00979 85 13 B-01111 Use with shank with Pilot Drill

32 10 B-00985 90 13 B-01127
35 10 B-00991 95 13 B-01133
38 10 B-01002 100 13 B-01149
40 10 B-01018 110 13 B-01155
45 10 B-01024 120 13 B-01161
Working Working
48 10 B-01030 Size Size
length Part No. length Part No.
(mm) (mm)
(mm) (mm)
16 40 B-45995 38 40 B-46056

Center drill 19 40 B-46006 45 40 B-46062

Application Fits holesaws Part No. 25 40 B-46012 50 40 B-46078

30 40 B-46028 53 40 B-46084
Steel, etc. 16-55mm B-01177
32 40 B-46034 57 40 B-46090
Steel etc. 60-120mm B-01183
35 40 B-46040 64 40 B-46109
FRP, resin, etc 16-55mm B-01199
Holesaw with Shank and Pilot drill
FRP, resin, etc 60-120mm B-01208

Working Working
Size Size
length Part No. length Part No.
(mm) (mm)
(mm) (mm)
16 40 B-45870 38 40 B-45939
Suitable for Included Hole saws (1 each) Part No. 19 40 B-45886 45 40 B-45945
32,38,48,54,64mm, Adapter 25 40 B-45892 50 40 B-45951
For Soft Materials D-70203
with pilot drill(10mm)
30 40 B-45901 53 40 B-45967
32 40 B-45917 57 40 B-45973
Diamond wet holesaw 35 40 B-45923 64 40 B-45989

Accessories for Vacuum brazed diamond holesaw

Shank with pilot drill

Shank
Working Working
Size Size
length Part No. length Part No.
(mm) (mm)
(mm) (mm) Pilot drill
19 38 D-61210 54 38 D-61329
20 38 D-61226 57 38 D-61335
Type of pilot
Application Fits holesaws Part No.
22 38 D-61232 60 38 D-61341 drill
25 38 D-61248 64 38 D-61357
Shank with pilot drill   
29 38 D-61254 65 38 D-61363
For 13mm drill TCT All B-46115
32 38 D-61260 67 38 D-61379
Shank
35 38 D-61276 68 38 D-61385
For 13mm drill - All B-46137
38 38 D-61282 70 38 D-61391
41 38 D-61298 76 38 D-61400 Pilot drill   

44 38 D-61307 79 38 D-61416 For 13mm drill TCT All B-46121

51 38 D-61313 83 38 D-61422
ACCESSORIES
Drilling (Masonry)

For SDS-PLUS Hammers For SDS-MAX Hammers 17 mm Hex 19 mm Hex

21mm Hex 28.6mm Hex 30mm Hex Makita Small

For Straight shank T.C.T drill bit 5 pcs. set with Straight shank
*5 different sizes

T.C.T drill bit with Straight shank

Overall length Working length

Bit diameter (mm) Part No.
(mm) (mm)
3 60 30 D-05228
4 70 35 D-05234 Overall length Working length
Bit diameter (mm) Part No.
5.5 100 60 D-36728 (mm) (mm)
5.5 150 90 D-36734 4 70 35
5 85 45 D-05240 5 85 45 *D-05175
6 100 60 D-05256 6, 8, 10 100 60
6 150 90 D-05262 5 85 45
6.5 100 55 D-36740 5.5,6.5 100 60 *D-36762
6.5 150 90 D-36756
8,10 150 90
7 100 55 D-05278
7 100 55 D-16508
7 150 90 D-05284
8 110 60 D-16514
8 110 60 D-05290
5, 6, 7, 8, 10 110 60 *D-20719
8 150 90 D-05309
9 150 90 D-05315
10 150 90 D-05321 T.C.T drill bit 5 pcs. set with Straight shank
10 400 315 D-18960 *5 different sizes
11 150 90 D-05337 Size: inch

12 150 90 D-05343
12 400 315 D-17697
12 600 505 D-17728
13 150 85 D-05359
14 150 85 D-05365
14 400 315 D-18976
Bit diameter Overall length Working length Part No.
15 150 85 D-05371
3/16'' 3-1/2'' 2''
16 150 85 D-05387 *D-36033
1/4'',5/16'',3/8'',1/2'' 6'' 3-9/16''
16 400 315 D-17706
16 600 505 D-17734 5/32'' 6'' 3-9/16'' D-66597

18 400 315 D-18982 3/16'' 6'' 3-9/16'' D-66606

20 400 315 D-17712 1/4'' 6'' 3-9/16'' D-36027
20 600 505 D-17740 5/16'' 6'' 3-9/16'' D-71059
Size: inch 3/8'' 6'' 3-9/16'' D-71065
Bit diameter Overall length Working length Part No.
1/2'' 6'' 3-9/16'' D-71071
1/8'' 3'' 1-3/4'' D-24309
5/32'' 6'' 3-9/16'' D-24315
3/16'' 3-1/2'' 2'' D-24321 T.C.T drill bit 20 pcs. set with Straight shank
Size: inch
3/16'' 6'' 3-9/16'' D-24337
7/32'' 6'' 3-9/16'' D-24343
1/4'' 4'' 2-3/8'' D-24359
1/4'' 6'' 3-9/16'' D-24365
1/4'' 12'' 8-7/8'' D-24371 Bit diameter Overall length Working length Part No.
5/16'' 6'' 3-9/16'' D-24387
5/32'' 6'' 3-9/16'' D-66575
5/16'' 12'' 8-7/8'' D-24393
3/16'' 6'' 3-9/16'' D-66581
3/8'' 6'' 3-9/16'' D-24402
3/8'' 12'' 8-7/8'' D-24418 1/4'' 6'' 3-9/16'' D-24365-20
7/16'' 6'' 3-9/16'' D-24424 5/16'' 6'' 3-9/16'' D-71087
1/2'' 6'' 3-3/8'' D-24430
3/8'' 6'' 3-9/16'' D-24402-20
1/2'' 12'' 8-7/8'' D-24446
5/8'' 6'' 3-3/8'' D-24452 1/2'' 6'' 3-3/8'' D-24430-20
5/8'' 12'' 8-7/8'' D-24468
3/4'' 12'' 8-7/8'' D-24480
1'' 12'' 8-7/8'' D-24496
TCT drill bit with 1/4'' Hex shank T.C.T drill bit set with Straight shank
*3 different sizes

1/4''Hex (MZ)
Bit Overall Working
Shank
diameter length length Per pkg. Part No.
Type
(mm) (mm) (mm)
3 80 35 MZ 1 D-23771
Overall length Working length
4 80 35 MZ 1 D-23787 Bit diameter (mm) Part No.
(mm) (mm)
5 90 45 MZ 1 D-23793 5 85 50
6 100 55 MZ 1 D-23802 6 100 60 D-41034
8 100 55 MZ 1 D-23818 8 120 80
1/4''Hex (NZ)
3 80 35 NZ 1 D-31463
3.2 80 35 NZ 1 D-63694 T.C.T drill bit set with Straight shank
*5 different sizes
4 80 35 NZ 1 D-31479
5 90 45 NZ 1 D-31485
6 100 55 NZ 1 D-31491
6.5 100 55 NZ 1 D-55061
8 100 55 NZ 1 D-31500
Size: inch
1/4''Hex (MZ)
Bit Overall Working Shank Overall length Working length
Per pkg. Part No. Bit diameter (mm) Part No.
diameter length length Type (mm) (mm)
1/8'' 3'' 1-11/64'' MZ 1 D-24038 4 75 40
3/16'' 3-11/32'' 1-9/16'' MZ 1 D-24044 5 85 50
1/4'' 4'' 2-5/32” MZ 1 D-24050 6 100 60 D-41040
8 120 80

T.C.T drill bit with Straight shank 10 120 80

T.C.T drill bit set with Straight shank

*8 different sizes
Overall length Working length
Bit diameter (mm) Part No.
(mm) (mm)
3 60 30 D-40727
3.5 75 40 D-40733
4 75 40 D-40749
4.5 85 50 D-40755
5 85 50 D-40761 Overall length Working length
Bit diameter (mm) Part No.
5 150 90 D-40777 (mm) (mm)
5.5 85 50 D-40783 3 60 30
5.5 150 90 D-40799 4 75 40
6 100 60 D-40808
5 85 50
6 150 90 D-40814
6 200 130 D-40820 6 100 60
D-41791
6 400 300 D-40836 7 100 60
6.5 100 60 D-40842
8 120 80
6.5 150 90 D-40858
9 120 80
6.5 400 300 D-40864
7 100 60 D-40870 10 120 80
7 150 90 D-40886
7 400 300 D-40892
8 120 80 D-40901
8 150 90 D-40917
8 200 130 D-40923
8 400 300 D-40939
9 120 80 D-40945
10 120 80 D-40951
10 150 90 D-40967
10 200 130 D-40973
10 400 300 D-40989
11 150 90 D-40995
12 150 90 D-41006
12 200 130 D-41012
12 400 300 D-41028
 Overall length Working length
T.C.T drill bit with Straight shank/ Omnibohrer
er Bit diameter (mm)
(mm) (mm)
Part No.

5.5 85 55
6.5 100 60
8 110 60 D-36974
Percussion sharpened high resistance carbide tip with reinforced head.
ead. 10 150 100
Can drill multiplicity of materials without changing drill bit 12 150 100
(ideal for doors, shelves, window frames etc).
Use with rotary or percussion drills. Without percussion use on vitrified brick, wood, Size: inch
brick. With percussion use on , block, stone, plaster most grades of concrete.
Bit diameter Overall length Working length
Overall length Working length Part No.
Bit diameter (mm) Part No. (mm) (mm) (mm)
(mm) (mm)
3 60 30 D-30287 1/8'' 3'' 1-3/8''

4 70 40 D-30293 3/16'' 3-1/2'' 1-3/4''

1/4'' 4'' 2-3/16'' D-37100
5 85 55 D-30302
5.5 85 55 D-31027 5/16'' 6'' 4-3/16''

5.5 100 60 D-31033 3/8'' 6'' 4-3/16''

5.5 150 100 D-31049 3/16'' 3-1/2'' 1-3/4''

6 100 60 D-30318 1/4'' 6'' 4-3/8''

5/16'' 6'' 4-3/16'' D-37029
6 150 100 D-30324
6.5 85 55 D-31055 3/8'' 6'' 4-3/16''

6.5 100 60 D-31061 1/2'' 6'' 3-5/8''

6.5 150 100 D-31077

7 100 60 D-30330 Glass bit with Straight shank
7 150 100 D-30346
8 110 60 D-30352
8 150 100 D-30368
9 150 100 D-30374
Overall
10 150 100 D-30380 Bit diameter
length Shank Type Per pkg. Part No.
(mm)
10 400 350 D-30396 (mm)
11 150 100 D-30405 3 65 Straight 1 D-25111
12 150 100 D-30411 4 65 Straight 1 D-25127
12 400 350 D-30427 5 65 Straight 1 D-25133
12 600 550 D-30433 6 65 Straight 1 D-25149
13 150 100 D-30449
8 70 Straight 1 D-25155
14 150 100 D-30455
10 80 Straight 1 D-25161
14 400 350 D-30461
Size: inch 12 80 Straight 1 D-25177
Size: inch
Bit diameter Overall length Working length Part No.
Overall
Bit diameter Shank Type Per pkg. Part No.
1/8'' 3'' 1-3/8'' D-36859 length
5/32'' 3-1/8'' 1-5/8'' D-36865 1/8'' 2-1/2'' Straight 1 D-25183
5/32'' 6'' 4-3/16'' D-36871
3/16'' 2-1/2'' Straight 1 D-25199
3/16'' 3-1/2'' 1-3/4'' D-36887
1/4'' 3'' Straight 1 D-25208
3/16'' 6'' 4-3/8'' D-36893
1/4'' 4'' 2-3/16'' D-36902 5/16'' 3'' Straight 1 D-25214
1/4'' 6'' 4-3/8'' D-36918 3/8'' 3-1/8'' Straight 1 D-25220
5/16'' 4-3/4'' 2-7/16'' D-36924
1/2'' 3-1/8'' Straight 1 D-25236
5/16'' 6'' 4-3/16'' D-36930
3/8'' 6'' 4-3/16'' D-36946
1/2'' 6'' 3-5/8'' D-36952 Glass bit with 1/4'' Hex shank

T.C.T drill bit 5 pcs. set with Straight shank/ Omnibohrer

*5 different sizes 1/4''Hex (MZ)
Overall
Bit diameter
length Shank Type Per pkg. Part No.
(mm)
(mm)
4 65 MZ 1 D-15942
Overall length Working length 5 65 MZ 1 D-15958
Bit diameter (mm) Part No.
(mm) (mm)
6 65 MZ 1 D-15964
5 85 55
8 70 MZ 1 D-15970
6 100 60
10 80 MZ 1 D-15986
8 110 60 D-30477
10 150 100 1/4''Hex (NZ)
12 150 100 4 65 NZ 1 D-31413
4 70 40 5 65 NZ 1 D-31429
5 85 55 6 65 NZ 1 D-31435
6 100 60 D-36712 8 70 NZ 1 D-31441
8 150 100
10 80 NZ 1 D-31457
10 150 100
 42 Accessories
T.C.T drill bit for SDS-PLUS Hammers
(Wood/Metal)
Drilling

Product Standard type Centering Tip Centering Tip V-PLUS 4 cutter NEMESIS ll

Range

Carbide
(Masonry)
Drilling

Tip
Full carbide
2 Cutter Centering tip 2 Cutter Centering tip 2 Cutter Centering tip 4 Cutter
tip 4 Cutter

Flute
Standard 2 flute Standard 2 flute High Durability 2 flute Standard 2 flute High Durability 4 flute

Size 3.5 - 30mm 4 - 32mm 5 - 32mm

5/32” - 1” 5/32” - 1” 4 - 32mm 5 - 25mm
5/32” - 1-1/4”

Chart A A A A A
5 5 5 5 5
4 4 4 4 4
3 3 3 3 3
A - Speed
2 2 2 2 2
B - Life E B E B E B E B E B
1 1 1 1 1

C - Easy positioning
D - Accuracy
E - Anti Jamming in rebar

D C D C D C D C D C

Work material

T.C.T drill bit for SDS-MAX Hammers

Product Standard type NEMESIS Mining

Range Specialized

Carbide

Tip
Centering
2 Cutter 4 Cutter
tip 4 Cutter

Flute
Standard 2 flute High Durability 4 flute High Durability 2 flute

Size 12-40mm 12-40mm

1/2" - 1-1/2" 1/2" - 1-1/2" 28-32mm

Chart A A
5 5
4 4
3 3
A - Speed
2 2
B - Life E B E B
1 1

C - Easy positioning Specialized

D - Accuracy
E - Anti Jamming in rebar

D C D C

Work material
Tools for SDS-PLUS Hammers Bit diameter (mm) Overall length(mm) Working length (mm) Part No.
14 1000 950 B-58497
15 160 110 B-58506
15 210 160 B-58512
15 260 210 B-58528
15 450 400 B-58534
16 160 110 B-58540
16 210 160 B-58556
16 260 210 B-58562
16 310 260 B-58578
T.C.T drill bit for SDS-PLUS hammers/ nemesis II 16 450 400 B-58584
*One piece solid carbide tip (5-10mm)
*No seizing up on hitting reinforcing steel. 16 600 550 B-58590
*Ensure precision drill holes. 16 1000 950 B-58609
*Drills more precisely 18 250 200 B-58615
*Low vibration and high fracture resistance. 18 450 400 B-58621
20 250 200 B-58637
20 450 400 B-58659
22 250 200 B-58665
Bit diameter (mm) Overall length(mm) Working length (mm) Part No.
22 450 400 B-58687
5 115 50 B-57897
24 250 200 B-58693
5 165 100 B-57906
24 450 400 B-58702
5 215 150 B-57912
25 250 200 B-58718
5 265 200 B-57928
25 450 400 B-58724
5 315 250 B-57934
28 250 200 B-58746
5.5 115 50 B-57940
28 450 400 B-58752
5.5 165 100 B-57956
30 250 200 B-58768
6 115 50 B-57962
30 450 400 B-58774
6 165 100 B-57978
32 450 400 B-58780
6 215 150 B-57984
Size: inch
6 265 200 B-57990
Bit diameter Overall length Working length Part No.
6 315 250 B-58001
5/32'' 4-1/2'' 2'' B-59330
6.5 165 100 B-58023
6.5 215 150 B-58039 5/32'' 6-1/2'' 4'' B-59346
6.5 265 200 B-58045 3/16'' 4-1/2'' 2'' B-59352
6.5 315 250 B-58051 3/16'' 6-1/2'' 4'' B-59368
7 115 50 B-58067 3/16'' 8-1/2'' 6'' B-59374
7 165 100 B-58073 3/16'' 10-1/2'' 8'' B-59380
7 215 150 B-58089 3/16'' 12-1/2'' 10'' B-59396
8 115 50 B-58095 1/4'' 4-1/2'' 2'' B-59405
8 165 100 B-58104 1/4'' 6-1/2'' 4'' B-59411
8 215 150 B-58110 1/4'' 8-1/2'' 6'' B-59427
8 265 200 B-58126 1/4'' 10-1/2'' 8'' B-59433
8 315 250 B-58132 1/4'' 12-1/2'' 10'' B-59449
8 465 400 B-58154 5/16'' 6-1/2'' 4'' B-59455
9 165 100 B-58176 5/16'' 6-1/2'' 10'' B-59461
9 265 200 B-58182 5/16'' 18'' 16'' B-59477
10 115 50 B-58198 3/8'' 6-1/4'' 4'' B-59483
10 165 100 B-58207 3/8'' 12-1/4'' 10'' B-59499
10 215 150 B-58213 3/8'' 18'' 16'' B-59508
10 265 200 B-58229 7/16'' 6-1/4'' 4'' B-59514
10 315 250 B-58235 7/16'' 12-1/4'' 10'' B-59520
10 455 390 B-58257 7/16'' 18'' 16'' B-59536
10 600 540 B-58263 1/2'' 6-1/4'' 4'' B-59542
10 1000 940 B-58279 1/2'' 12-1/4'' 10'' B-59558
11 160 110 B-58285 1/2'' 18'' 16'' B-59564
11 210 160 B-58291 9/16'' 6-1/4'' 4'' B-59570
11 260 210 B-58300 9/16'' 12-1/4'' 10'' B-59586
11 310 260 B-58316 9/16'' 18'' 16'' B-59592
12 160 110 B-58322 5/8'' 8-1/4'' 6'' B-59601
12 210 160 B-58338 5/8'' 10-1/4'' 8'' B-59617
12 260 210 B-58344 5/8'' 12/1/4'' 10'' B-59623
12 310 260 B-58350 5/8'' 18'' 16'' B-59639
12 450 400 B-58366 3/4'' 8'' 6'' B-59645
12 600 550 B-58372 3/4'' 10'' 8'' B-59651
12 1000 950 B-58388 3/4'' 12'' 10'' B-59667
13 160 110 B-58394 3/4'' 18'' 16'' B-59673
13 210 160 B-58403 7/8'' 8'' 6'' B-59689
13 260 210 B-58419 7/8'' 10'' 8'' B-59695
13 310 260 B-58425 7/8'' 12'' 10'' B-59704
14 160 110 B-58431 7/8'' 18'' 16'' B-59710
14 210 160 B-58447 1'' 10'' 8'' B-59726
14 260 210 B-58453 1'' 12'' 10'' B-59732
14 310 260 B-58469 1'' 18'' 16'' B-59748
14 450 400 B-58475 1-1/8'' 10'' 8'' B-59754
14 600 550 B-58481 1-1/8'' 18'' 10'' B-59760
1-1/4'' 18'' 16'' B-59776
T.C.T drill bit for SDS-PLUS hammers/ nemesis II T.C.T drill bit for SDS-PLUS hammers/ nemesis II
*3 different sizes
**5 different sizes
***7 different sizes

5pcs. each
Overall length Working length Overall length Working length
Bit diameter (mm) Part No. Bit diameter (mm) Part No.
(mm) (mm) (mm) (mm)
5 115 50 B-58796 5, 6, 8 115 50 *B-58986
5.5 115 50 B-58805 5, 6 115 50
**B-58992
6 115 50 B-58811 6, 8, 10 165 100
6 165 100 B-58827 5, 7 115 50
**B-59003
6 215 150 B-58833 6, 7, 8 165 100
6.5 165 100 B-58849 5 165 100
8 115 50 B-58883 6, 6.5 215 150
***B-59019
8 165 100 B-58899 6.5, 8, 10 265 200
8 215 150 B-58908 12 260 210
10 165 100 B-58914 5, 6, 8, 10 165 100
**B-59025
10 215 150 B-58920 12 160 110
12 160 110 B-58936 5.5, 6 115 50
***B-59053
12 210 160 B-58942 5.5, 6.5, 7, 8, 10 165 100
6, 8, 10 165 100 *B-59075
6.5, 8, 10 165 100 *B-59097

T.C.T drill bit for SDS-PLUS hammers/ V-PLUS

10pcs. each
Overall length Working length Overall length Working length
Bit diameter (mm) Part No. Bit diameter (mm) Part No.
(mm) (mm) (mm) (mm)
5 115 50 B-63214 4 110 50 B-47232
5 165 100 B-63220 4 160 100 B-47248
5.5 115 50 B-63236 5 110 50 B-46492
5.5 165 100 B-63242 5 140 80 B-47254
6 115 50 B-63258 5 160 100 B-46501
6 165 100 B-63264 5 210 150 B-47260
6 215 150 B-63270 5 260 200 B-47276
6 265 200 B-63286 5 310 250 B-47282
6 315 250 B-63292 5 450 390 B-60408
6.5 165 100 B-63301 5.5 110 50 B-47298
6.5 215 150 B-63317 5.5 160 100 B-47307
6.5 265 200 B-63323 5.5 210 150 B-47313
6.5 315 250 B-63339 5.5 260 200 B-47329
7 115 50 B-63345 5.5 310 250 B-47335
7 165 100 B-63351 6 110 50 B-46517
8 115 50 B-63367 6 160 100 B-46523
8 165 100 B-63373 6 210 150 B-47341
8 215 150 B-63389 6 260 200 B-47357
8 265 200 B-63395 6 310 250 B-47363
10 115 50 B-63404 6 460 400 B-47379
10 165 100 B-63410 6.5 110 50 B-47385
10 215 150 B-63426 6.5 160 100 B-47391
10 265 200 B-63432 6.5 210 150 B-47400
10 315 250 B-63448 6.5 260 200 B-47416
12 160 110 B-63454 6.5 310 250 B-47422
12 210 160 B-63460 7 110 50 B-47438
12 260 210 B-63476 7 160 100 B-47444
12 310 260 B-63482 7 210 150 B-47450
14 160 110 B-63498 7 250 190 B-47466
14 210 160 B-63507 8 110 50 B-46539
14 260 210 B-63513 8 160 100 B-46545
14 310 260 B-63529 8 210 150 B-47472
8 260 200 B-47488
8 310 250 B-47494
 Overall length Working length Overall length Working length
Bit diameter (mm) Part No. Bit diameter (mm) Part No.
(mm) (mm) (mm) (mm)
8 400 340 B-47503 20 450 400 B-48094
8 460 400 B-47519 20 600 550 B-48103
8 600 540 B-47525 20 800 750 B-48119
9 160 100 B-47531 20 1000 950 B-48125
9 210 150 B-47547 22 250 200 B-48131
9.5 160 100 B-47553 22 450 400 B-48147
9.5 310 250 B-51409 22 600 550 B-48153
10 110 50 B-46551 22 1000 950 B-48169
10 160 100 B-46567 23 250 200 B-48175
10 210 150 B-47569 23 450 400 B-48181
10 260 200 B-47575 24 250 200 B-48197
10 310 250 B-47581 24 450 400 B-48206
10 350 290 B-47597 24 600 550 B-48212
10 450 390 B-47606 25 250 200 B-48228
10 600 540 B-47612 25 450 400 B-48234
10 800 740 B-47628 25 600 550 B-48240
10 1000 940 B-47634 25 1000 950 B-48256
11 160 110 B-47640 26 250 200 B-48262
11 210 160 B-47656 26 450 400 B-48278
11 260 210 B-47662
11 310 260 B-47678
T.C.T drill bit for SDS-PLUS hammers/ V-PLUS
12 160 110 B-46573
12 210 160 B-47684
12 260 210 B-47690
12 310 260 B-47709
12 360 310 B-47715
12 450 400 B-47721
12 600 550 B-47737
12 800 750 B-47743 5pcs. each
12 1000 950 B-47759 Bit diameter Overall length Working length
Part No.
(mm) (mm) (mm)
13 160 110 B-47765
5 110 50 B-46492-5
13 210 160 B-47771
5.5 110 50 B-47298-5
13 260 210 B-47787
6 110 50 B-46517-5
13 310 260 B-47793
6 160 100 B-46523-5
14 160 110 B-46589
6 210 150 B-47341-5
14 210 160 B-47802
6.5 110 50 B-47385-5
14 260 210 B-47818
6.5 160 100 B-47391-5
14 310 260 B-47824
8 110 50 B-46539-5
14 450 400 B-47830
8 160 100 B-46545-5
14 600 550 B-47846
8 210 150 B-47472-5
14 1000 950 B-47852
10 160 100 B-46567-5
15 160 110 B-47868
10 210 150 B-47569-5
15 210 160 B-47874
12 160 110 B-46573-5
15 260 210 B-47880
12 210 160 B-47684-5
15 450 400 B-47896
10pcs. each
16 160 110 B-47905
16 210 160 B-47911 5 110 50 B-46492-10
16 260 210 B-47927 5 160 100 B-46501-10
16 310 260 B-47933 6 110 50 B-46517-10
16 450 400 B-47949 6 160 100 B-46523-10
16 600 550 B-47955 6 210 150 B-47341-10
16 800 750 B-47961 8 110 50 B-46539-10
16 1000 950 B-47977 8 160 100 B-46545-10
17 210 160 B-47983 8 210 150 B-47472-10
17 450 400 B-47999 10 110 50 B-46551-10
18 200 150 B-48000 10 160 100 B-46567-10
18 300 250 B-48016 10 210 150 B-47569-10
18 450 400 B-48022 12 160 110 B-46573-10
18 600 550 B-48038 12 210 160 B-47684-10
18 1000 950 B-48044 25pcs. each
19 200 150 B-48050 5 110 50 B-46492-25
19 450 400 B-48066 5 160 50 B-46501-25
20 200 150 B-48072 6 160 100 B-46523-25
20 300 250 B-48088 6 210 150 B-47341-25
 Bit diameter Overall length Working length
(mm) (mm) (mm)
Part No. T.C.T drill bit for SDS-PLUS hammers/ 4 cutter
6.5 210 150 B-47400-25
6.5 260 200 B-47416-25
8 160 100 B-46545-25
8 210 150 B-47472-25 Overall length Working length
Bit diameter (mm) Part No.
8 260 200 B-47488-25 (mm) (mm)
8 310 250 B-47494-25 5 110 50 B-68127

10 160 100 B-46567-25 5 160 100 B-68133

10 210 150 B-47569-25 5 210 150 B-68149

10 260 200 B-47575-25 5 260 200 B-68155

12 160 100 B-46573-25 6 110 50 B-62496

12 210 160 B-47684-25 6 160 100 B-62505

50pcs. each 6 210 150 B-62511

6 260 200 B-62527
5 110 50 B-46492-50
6 310 250 B-68161
5 160 100 B-46501-50
6.5 110 50 B-62533
6 110 50 B-46517-50
6.5 160 100 B-62549
6 160 100 B-46523-50
6.5 210 150 B-62555
6 210 150 B-47341-50
6.5 260 200 B-62561
8 110 50 B-46539-50
7 110 50 B-62577
8 160 100 B-46545-50
7 160 100 B-62583
8 210 150 B-47472-50
7 210 150 B-62599
10 110 50 B-46551-50
8 110 50 B-62608
10 160 100 B-46567-50
8 160 100 B-62614
10 210 150 B-47569-50
8 210 150 B-62620
8 260 200 B-62636
T.C.T drill bit for SDS-PLUS hammers/ V-PLUS 8 310 250 B-62642
* 6 x 160 2pcs., 8 x 160 3pcs. 8 460 400 B-62658
** 5 x 110 3pcs., 6 x 160 4pcs., 8 x 160 2pcs., 10 x 160 2pcs.
*** 6 x 160 3pcs., 8 x 160 4pcs., 10 x 160 3pcs., 12 x 160 2pcs. 10 110 50 B-62664
**** 5 x 110 4pcs., 6 x 160 5pcs., 8 x 160 3pcs. 10 160 100 B-62670
***** 6 x 160 2pcs., 8 x 160 2pcs., 10 x 160 2pcs.
10 210 150 B-62686
10 260 200 B-62692
10 310 250 B-62701
10 350 290 B-62717
10 460 400 B-62723
12 160 100 B-62739
Overall length Working length 12 210 150 B-62745
Bit diameter (mm) Part No.
(mm) (mm) 12 260 200 B-62751
5, 6, 8 110 50 12 310 250 B-62767
B-49046
6, 8, 10, 12 160 100 12 350 290 B-62773
5, 6, 8 110 50 12 460 400 B-62789
B-49052
6, 8 160 100 14 160 100 B-62795
5 110 50 14 210 150 B-62804
B-49074
6, 8, 10, 12 160 100 14 260 200 B-62810
6 110 50 14 310 250 B-62826
*B-49080
6, 8, 10, 12, 14, 16 160 100 14 350 290 B-62832
**5 110 50 14 460 400 B-62848
**B-49096
6, 8, 10, 12 160 100 16 160 100 B-62854
6, 8, 10, 12 160 100 ***B-49105 16 210 150 B-62860
5 110 50 16 260 200 B-62876
****B-49111
6, 8 160 100 16 310 250 B-62882
5, 6 110 50 16 350 290 B-62898
6, 8, 10 160 100 *****B-49127 16 460 400 B-62907
10, 12 210 150 18 260 200 B-68177
5, 6 110 50 18 460 400 B-68236
B-49133
6, 8, 10 160 100 20 260 200 B-68183
20 460 400 B-68242
22 260 200 B-68199
22 460 400 B-68258
25 260 200 B-68208
25 460 400 B-68264
 Overall length Working length
T.C.T drill bit for SDS-PLUS hammers/ Centering tip Bit diameter (mm)
(mm) (mm)
Part No.

16 310 250 B-56138

16 350 290 B-56144
16 460 400 B-56150
17 210 150 B-56465
Overall length Working length
Bit diameter (mm) Part No. 17 350 290 B-56471
(mm) (mm)
4 110 50 B-55859 18 210 150 B-62125
4 160 100 B-67804 18 310 250 B-67985
5 110 50 B-54128 18 350 290 B-62131
5 160 100 B-54134 18 460 400 B-68068
5 210 150 B-67810 19 210 150 B-62147
5.5 110 50 B-55865 19 350 290 B-62153
5.5 160 100 B-55871 20 210 150 B-62169
5.5 210 150 B-67826 20 310 250 B-67991
6 110 50 B-54140 20 350 290 B-62175
6 160 100 B-54156 20 460 400 B-68074
6 210 150 B-54162 22 210 150 B-62181
6 260 200 B-67832 22 260 200 B-68002
6.5 110 50 B-55887 22 350 290 B-62197
6.5 160 100 B-55893 22 460 400 B-68080
6.5 210 150 B-55902 24 210 150 B-62206
6.5 260 200 B-55918 24 260 200 B-68018
7 110 50 B-55924 24 350 290 B-62212
7 160 100 B-55930 24 460 400 B-68096
7 210 150 B-55946 25 210 150 B-62228
8 110 50 B-54178 25 260 200 B-68024
8 160 100 B-54184 25 350 290 B-62234
8 210 150 B-55952 25 460 400 B-68105
8 260 200 B-55968 26 260 200 B-68030
8 310 250 B-67848 26 460 400 B-68111
8 400 340 B-67854 28 210 150 B-62240
8 460 400 B-68046 28 350 290 B-62256
9 160 100 B-55974 30 210 150 B-62262
9 210 150 B-67860 30 350 290 B-62278
10 110 50 B-55980 32 350 290 B-62284
10 160 100 B-54190 Size: inch
10 210 150 B-54209 Bit diameter Overall length Working length Part No.
10 260 200 B-55996 5/32'' 6-1/4'' 4'' B-61662
10 310 250 B-56007 3/16'' 4-1/2'' 2'' B-61678
10 350 290 B-67876 3/16'' 6-1/4'' 4'' B-61684
10 460 400 B-56013 3/16'' 8-1/4'' 6'' B-61690
11 160 100 B-67882 3/16'' 12'' 10'' B-61709
11 210 150 B-67898 7/32'' 6-1/4'' 4'' B-61715
11 260 200 B-67907 1/4'' 4-1/2'' 2'' B-61721
12 160 100 B-54215 1/4'' 6-1/4'' 4'' B-61737
12 210 150 B-54221 1/4'' 8-1/4'' 6'' B-61743
12 260 200 B-56029 1/4'' 11'' 8-1/2'' B-61759
12 310 250 B-67913 5/16'' 6-1/4'' 4'' B-61765
12 350 290 B-56035 5/16'' 12'' 10'' B-61771
12 460 400 B-56041 3/8'' 6-1/4'' 4'' B-61787
13 160 100 B-56057 3/8'' 12-1/4'' 10'' B-61793
13 210 150 B-67929 3/8'' 18'' 15-1/2'' B-61802
13 260 200 B-67935 7/16'' 12-1/4'' 10'' B-61818
14 160 100 B-56063 1/2“ 6-1/4'' 4'' B-61824
14 210 150 B-56079 1/2'' 12-1/4'' 10'' B-61830
14 260 200 B-56085 9/16'' 6-1/4'' 4'' B-61846
14 310 250 B-67941 9/16'' 12-1/4'' 10'' B-61852
14 350 290 B-56091 5/8'' 8'' 6'' B-61868
14 460 400 B-56100 5/8'' 12'' 10'' B-61874
15 160 100 B-67957 3/4'' 8'' 6'' B-61880
15 260 200 B-67963 3/4'' 12'' 10'' B-61896
15 460 400 B-68052 7/8'' 12'' 10'' B-61905
16 160 100 B-56116 7/8'' 18'' 15-1/2'' B-61911
16 210 150 B-56122 1'' 10'' 8'' B-61927
16 260 200 B-67979 1'' 1''x18'' 15-1/2'' B-61933
T.C.T drill bit set for SDS-PLUS hammers/ Centering tip T.C.T drill bit set for SDS-PLUS hammers/ Centering tip
(B-56421 contains 5sets of B-54710 and 5sets of B-55784 in counter display)

5pcs. each
Overall length Working length Part No.
Bit diameter (mm) Part No.
(mm) (mm)
4 110 50 B-60224 B-56421
5 110 50 B-60230
5 160 100 B-60246
T.C.T drill bit for SDS-PLUS hammers
5.5 110 50 B-60252
5.5 160 100 B-60268
6 110 50 B-60274
6 160 100 B-60280
6 210 150 B-61597 Overall length Working length
Bit diameter (mm) Part No.
(mm) (mm)
6.5 110 50 B-60296
3.5 90 30 D-16950
6.5 160 100 B-60305
3.5 110 50 D-15665
6.5 210 150 B-61606
4 110 50 D-00016
7 110 50 B-60311
4 160 100 D-66612
7 160 100 B-60327
4.3 110 50 D-01096
8 110 50 B-60333
5 110 50 D-00022
8 160 100 B-60349
5 160 100 D-00038
9 160 100 B-60355
5 210 150 D-66628
10 110 50 B-60361
5.5 110 50 D-00044
10 160 100 B-60377
5.5 160 100 D-16106
12 160 100 B-60383
5.8 110 50 D-03268
13 160 100 B-61612
6 110 50 D-00050
14 160 100 B-61628
6 160 100 D-00066
14 210 150 B-61634
6 210 150 D-00072
17 210 150 B-61640
6 260 200 D-25666
6.4 160 100 D-01105
10pcs. each 6.5 110 50 D-00088
Overall length Working length
Bit diameter (mm) Part No. 6.5 160 100 D-00094
(mm) (mm)
6 160 100 B-59271 6.5 210 150 D-45082
6.5 260 200 D-66634
6 210 150 B-59287
7 110 100 D-00119
6.5 160 100 B-59293
7 160 50 D-00103
6.5 210 150 B-59302
7 210 150 D-25600
25pcs. each
Overall length Working length 8 110 50 D-00125
Bit diameter (mm) Part No.
(mm) (mm) 8 160 100 D-00131
6.5 160 100 B-59318 8 210 150 D-00147
6.5 210 150 B-59324 8 260 200 D-00153
8 310 250 D-66640
8 460 400 D-29206
T.C.T drill bit 5 pcs. set for SDS-PLUS hammers/ 8.5 160 100 D-01111
Centering tip 9 110 50 D-08040
(5 different sizes)
9 160 100 D-08056
9 210 150 D-00169
9.5 160 100 D-34344
9.5 210 150 D-03274
* 8 x 160 2pcs., 10 x 160 2pcs. 10 110 50 D-09117
** 6 x 110 2pcs., 8 x 160 2pcs.
Overall length Working length 10 160 100 D-00175
Bit diameter (mm) Part No.
(mm) (mm) 10 210 150 D-00181
5, 6, 8 110 50 10 260 200 D-00197
B-54710
6, 8 160 100 10 310 250 D-00206
6 110 50 10 350 290 D-66656
*B-54704
8, 10 160 100 10 460 400 D-17538
6 110 50 10.5 160 100 D-01127
**B-55784
8, 10 160 100 11 160 100 D-00212
5, 5.5, 6, 6.5, 8 160 100 B-57021 11 210 150 D-66662
5.5, 6, 6.5, 8, 10 160 100 B-57037 11 260 200 D-66678
12 160 100 D-00228
 Overall length Working length Size: inch
Bit diameter (mm) Part No.
(mm) (mm) Bit diameter Overall length Working length Part No.
12 210 150 D-00234
5/32'' 4-1/2'' 1-5/8'' D-00804
12 260 200 D-00240
5/32'' 6-1/4'' 3-5/8'' D-00810
12 310 250 D-66684
3/16'' 4-1/2'' 1-5/8'' D-00826
12 350 290 D-16112
3/16'' 6-1/4'' 3-5/8'' D-00832
12 460 400 D-16271
3/16'' 8-1/4'' 5-1/2'' D-00848
12.5 160 100 D-14102
7/32'' 6-1/4'' 3-5/8'' D-00854
12.7 160 100 D-03280
1/4'' 4-1/2'' 1-5/8'' D-00860
12.7 350 290 D-03296
1/4'' 6-1/4'' 3-5/8'' D-00876
13 160 100 D-00256
1/4'' 8-1/4'' 5-1/2'' D-00882
13 210 150 D-66690
1/4'' 11'' 8-1/16'' D-00898
13 260 200 D-25622
5/16'' 6-1/4'' 3-5/8'' D-00907
13 350 290 D-16128
5/16'' 12'' 9-1/16'' D-00913
14 160 100 D-00262
3/8'' 6-1/4'' 3-5/8'' D-00929
14 210 150 D-21331
3/8'' 12-1/4'' 9-1/4'' D-00935
14 260 200 D-00278
7/16'' 6-1/4'' 3-5/8'' D-00941
14 310 250 D-66709
7/16'' 12-1/2'' 9-1/4'' D-00957
14 350 290 D-16134
1/2'' 6-1/4'' 3-3/8'' D-00963
14 460 400 D-17544
1/2'' 12-1/4'' 8-7/8'' D-00979
14.3 160 100 D-03997
9/16'' 6-1/2'' 3-3/8'' D-00985
14.5 160 100 D-01149
9/16'' 12-1/2'' 8-7/8'' D-00991
15 160 100 D-00284
5/8'' 8'' 4-1/2'' D-01002
15 260 200 D-25638
5/8'' 12'' 8-5/8'' D-01018
15 350 290 D-16140
11/16'' 8'' 4-5/16'' D-01024
15 460 400 D-17550
3/4'' 8'' 4-5/16'' D-01030
16 160 100 D-03981
3/4'' 12'' 8-7/16'' D-01046
16 210 150 D-00290
7/8'' 8'' 4-5/16'' D-01052
16 260 200 D-16156
7/8'' 12'' 8-7/16'' D-01068
16 310 250 D-00309
1'' 10'' 6-1/2'' D-01074
16 350 290 D-16162
16 460 400 D-16287
17 160 100 D-16178 T.C.T drill bit set for SDS-PLUS hammers/ Paper box
17 210 150 D-00315
17 260 200 D-16184
17 350 290 D-16190
17.5 160 100 D-03305
18 160 100 D-16209
18 210 150 D-00321
18 260 200 D-16215
15pcs. Bulk (1 size) package
18 300 240 D-00337
Overall length Working length
18 350 290 D-16221 Bit diameter (mm) Part No.
(mm) (mm)
18 460 400 D-17566 12 210 150 D-65143
19 210 150 D-00343 12 260 200 D-65159
19 350 290 D-16243 12 350 290 D-65165
19 460 400 D-16293 13 160 100 D-65171
20 210 150 D-00359 14 160 100 D-65187
20 260 200 D-16259 14 210 150 D-65193
20 310 250 D-00365 16 160 100 D-65202
20 350 290 D-16265 16 210 150 D-65218
20 460 400 D-15235 25pcs. Bulk (1 size) package
22 260 200 D-00371 Overall length Working length
Bit diameter (mm) Part No.
(mm) (mm)
22 310 250 D-08062
5 110 50 D-65115
22 460 400 D-15241
5 160 100 D-61949
24 260 200 D-25644
6 110 50 D-61612
24 460 400 D-16302
6 160 100 D-61961
25 260 200 D-00387
6.5 110 50 D-61983
25 310 250 D-08517
6.5 160 100 D-62000
25 350 290 D-03311
8 110 50 D-61634
25 460 400 D-15257
8 160 100 D-62022
26 260 200 D-00393
8 210 150 D-65121
26 310 250 D-08078
10 110 50 D-61656
26 460 400 D-15263
10 160 100 D-62044
28 460 400 D-16318
10 210 150 D-65137
30 460 400 D-17572
12 160 100 D-62066
50pcs. Bulk (1 size) package Bit diameter Overall length Working length Part No.
Overall length Working length
Bit diameter (mm) Part No. 7/32'' 6-1/4'' 3-5/8'' D-00854-25
(mm) (mm)
5 160 100 D-61955 1/4'' 4-1/2'' 1-5/8'' D-00860-25
6 110 50 D-61628 1/4'' 6-1/4'' 3-5/8'' D-00876-25
6 160 100 D-61977 1/4'' 8-1/4'' 5-1/2'' D-00882-25
6.5 110 50 D-61999 1/4'' 11'' 8-1/16'' D-00898-25
6.5 160 100 D-62016 5/16'' 6-1/4'' 3-5/8'' D-00907-25
8 110 50 D-61640 5/16'' 12'' 9-1/16'' D-00913-25
8 160 100 D-62038 3/8'' 6-1/4'' 3-5/8'' D-00929-25
10 110 50 D-61662 3/8'' 12-1/4'' 9-1/4'' D-00935-25
10 160 100 D-62050 7/16'' 6-1/4'' 3-5/8'' D-00941-25
12 160 100 D-62072 7/16'' 12-1/4'' 9-1/4'' D-00957-25
1/2'' 6-1/4'' 3-3/8'' D-00963-25
1/2'' 12-1/4'' 8-7/8'' D-00979-25
T.C.T drill bit set for SDS-PLUS hammers 9/16'' 6-1/4'' 3-3/8'' D-00985-25
9/16'' 12-1/4'' 8-7/8'' D-00991-25
5/8'' 8'' 4-1/2'' D-01002-25
10pcs. each 5/8'' 12'' 8-5/8'' D-01018-25
Overall length Working length
Bit diameter (mm) Part No. 11/16'' 8'' 4-5/16'' D-01024-25
(mm) (mm)
6.5 210 150 D-45098 3/4'' 8'' 4-5/16'' D-01030-25
25pcs. each 3/4'' 12'' 8-7/16'' D-01046-25
Overall length Working length 7/8'' 8'' 4-5/16'' D-01052-25
Bit diameter (mm) Part No.
(mm) (mm)
7/8'' 12'' 8-7/16'' D-01068-25
6.5 210 150 D-45107
1'' 10'' 6-1/2'' D-01074-25

T.C.T drill bit set for SDS-PLUS hammers/ Paper box T.C.T drill bit 5 pcs. set for SDS-PLUS hammers
(5 different sizes)

* 6 x 160 2pcs., 8 x 160 2pcs.

** 6 x 160 2pcs.
Overall length Working length
Bit diameter (mm) Part No.
25pcs. Bulk (1 size) package (mm) (mm)
Overall length Working length 5, 6, 8 160 100 *D-58914
Bit diameter (mm) Part No.
(mm) (mm) 5, 6, 8 110 50
5 110 50 D-01155-25 D-00795
6, 8 160 100
5.5 110 50 D-03763-25
5.5, 7 110 50
5.5 160 100 D-03779-25 D-03888
6, 7, 8 160 100
6 110 50 D-01161-25
6, 8 110 50
6 160 100 D-01177-25 D-61678
6, 8, 10 160 100
6.5 110 50 D-03785-25
6, 6.5 110 50
6.5 160 100 D-03791-25 D-17784
8, 10, 12 160 100
7 110 50 D-03800-25
5, 6, 7, 8, 10 160 100 D-20703
7 160 100 D-03816-25
6, 8, 10, 12 160 100 **D-36049
8 160 100 D-01183-25
5.8, 6.5 110 50
8 210 150 D-01199-25
6.5, 9.5 160 100 D-44987
8 260 200 D-06161-25
12.7 160 100
10 160 100 D-01208-25
10 210 150 D-03707-25
12 160 100 D-03713-25 T.C.T drill bit 10 pcs. set for SDS-PLUS hammers
12 210 150 D-03729-25

2pcs. each
T.C.T drill bit set for SDS-PLUS hammers/ Paper box Overall length Working length
Bit diameter (mm) Part No.
(mm) (mm)
5, 6, 8 110 50
D-40593
6, 8 160 100

Size: inch T.C.T drill bit 12 pcs. set for SDS-PLUS hammers
25pcs. each
Bit diameter Overall length Working length Part No.
5/32'' 4-1/2'' 1-5/8'' D-00804-25
3pcs. each
5/32'' 6-1/4'' 3-5/8'' D-00810-25 Overall length Working length
Bit diameter (mm) Part No.
3/16'' 4-1/2'' 1-5/8'' D-00826-25 (mm) (mm)
3/16'' 6-1/4'' 3-5/8'' D-00832-25 6, 8, 10, 12 160 100 D-62723
3/16'' 8-1/4'' 5-1/2'' D-00848-25
T.C.T drill bit 25 pcs. set for SDS-PLUS hammers T.C.T drill bit & chisel set for SDS-PLUS hammers

Size: inch
5pcs. each 10pcs. assortment
Overall length Working length Overall Working
Bit diameter (mm) Part No. Bit diameter Part No.
(mm) (mm) length length
5, 6, 7 110 50 3/16'', 7/32'', 1/4'', 5/16'', 3/8'',
D-33853 6-1/4'' 3-5/8''
7/16'', 1/2'', 9/16''
6, 7 160 100
Bull point 6-1/4'' D-45820
5.5, 6.5 110 50
D-46268 Cold chisel 3/4'' x 5-1/2''
5.5, 6.5, 8 160 100
5, 6, 8 110 50
D-40602
6, 8 160 100 T.C.T drill bit for SDS-PLUS hammers/ Dustless

T.C.T drill bit & chisel set for SDS-PLUS hammers

Bit diameter Overall length Working length

Part No.
(mm) (mm) (mm)
6pcs. assortment 12 325 200 B-64381
Overall length Working length 14 360 240 B-64397
Bit diameter (mm) Part No.
(mm) (mm)
16 360 240 B-64406
5, 6, 8 160 100
18 360 240 B-64412
Bull point 250
D-58920
Cold chisel 20x250
Scaling chisel 40x250 T.C.T drill bit & chisel set for SDS-PLUS hammers/
MAKPAC
T.C.T drill bit & chisel set for SDS-PLUS hammers

10pcs. assortment 17pcs. assortment

Overall Working length Overall length Working length
Bit diameter (mm) Part No. Bit diameter (mm) Part No.
length (mm) (mm) (mm) (mm)
5.5, 6, 6.5, 7, 8, 10, 12, 15 160 100 5, 5.5, 6, 7 110 50
Bull point 160 D-44971
5.5, 6, 7, 8, 10 160 100
Cold chisel 20x140
5, 5.5, 6, 6.5, 8, 10, 12, 16 160 100 8, 10 210 150

Bull point 160 D-46361 14 260 200 B-52059

Cold chisel 20x140
Bull point 140, 250
6, 7, 8, 10, 12 160 100
Cold chisel 20x140, 20x250
14 260 200
16, 18 210 150 D-41470 Scaling chisel 40x250
Bull point 160
Cold chisel 20x140
T.C.T drill bit & chisel set for SDS-PLUS hammers/
5, 6.5, 8, 9.5, 10, 12.7, 14.3, 16 160 100
Aluminum case
Bull point 160 D-57059

Cold chisel 20x140

T.C.T drill bit 5 pcs. set for SDS-PLUS hammers

(5 different sizes)

10pcs. assortment
Description Part No.
6 x 110, 8 x 160, 10, 12 x 210, 10, 12, 16, 20 x 460
Bull point 250 D-19174
Size: inch
Cold chisel 20 x 250
Bit diameter Overall length Working length Part No.
5.5, 6 x 110, 7, 8 x 160, 10 x 210, 10, 16, 20 x 460
3/16'' 4-1/2'' 1-5/8''
D-07973 Bull point 250 D-21191
1/4'', 5/16'', 3/8'', 1/2'' 6-1/4'' 3-5/8''
Cold chisel 20x250
 Description Part No. T.C.T drill bit & chisel set for SDS-PLUS hammers/ Roll
13pcs. assortment
up pouch
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12, 14 x 160, 16 x 210
Bull point 250 D-20111
Cold chisel 20 x 250
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12 x 160, 14, 16 x 460
Bull point 250 D-21185 13pcs. assortment
Cold chisel 20 x 250 Description Part No.
14pcs. assortment 5, 6, 7, 8 x 110, 5, 6, 7, 8, 10, 12, 14 x 160, 16 x 210
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12, 14 x 160, 10, 12, 14, 16 x 210 D-21325 Bull point 250 D-53659
17pcs. assortment Cold chisel 20x250
5, 6, 8, 10 x 110, 6, 8, 10,12 x 160, 8, 10 x 210, 12, 14 x 260 5.5, 6.5, 8x110, 6, 6.5, 8, 10 x 160, 10, 12, 14, 16 x 210
Bull point 140, 250 Bull point 250 D-70895
D-19180
Cold chisel 20 x 140, 20x250
Cold chisel 20x250
Scaling chisel 40 x 250
14pcs. Assortment
5, 5.5, 6, 8, 10 x 110, 6, 7, 8, 10 x 160, 8, 10 x 210, 14 x 260
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12, 14 x 160, 10, 12, 14, 16 x 210 D-53671
Bull point 140, 250
D-21200 17pcs. Assortment
Cold chisel 20 x 140, 20 x 250
Scaling chisel 40 x 250 5, 6, 8, 10x110, 6, 8, 10, 12x160, 8, 10x210, 12, 14x260

Size: inch Bull point 140, 250

D-54863
13pcs. assortment Cold chisel 20x140, 20x250
5/32'', 3/16'', 1/4'' x 4-1/2'', 3/16'', 7/32'', 1/4'', 5/16'', 3/8'', Scaling chisel 40x250
1/2'', 9/16'' x 6-1/4'', 5/8''x8''
5, 5.5, 6, 8, 10 x 110, 6, 7, 8, 10 x 160, 8, 10 x 210, 14 x 260
Bull point 10'' D-31734
Bull point 140, 250
Cold chisel 3/4'' x 10'' D-53073
Cold chisel 20x140, 20x250
Scaling chisel 40x250
T.C.T drill bit & chisel set for SDS-PLUS hammers/ 4, 5, 6.5x110, 6.5, 8, 10, 14.3, 16x160, 9.5, 12.8x160x2
Aluminum case in Makita blue Bull point 140, 250
D-53300
Cold chisel 20x140, 20x250
Scaling chisel 40x250
4, 5, 6, 8, 10x110, 6, 8, 10, 12, 14, 16x160, 12x210
Bull point 140, 250
D-53609
Cold chisel 20x140, 20x250
Scaling chisel 40x250
10pcs. assortment 5, 6, 8, 10x110, 5, 6, 7, 8, 10x 160, 8, 10x210, 14x260
Description Part No. Bull point 140, 250
6 x 110, 8 x 160, 10, 12 x 210, 10, 12, 16, 20 x 460 D-53621
Cold chisel 20x140, 20x250
Bull point 250 D-42385
Scaling chisel 40x250
Cold chisel 20 x 250
Size: inch
5.5, 6 x 110, 7, 8 x 160, 10 x 210, 10, 16, 20 x 460
17pcs. Assortment
Bull point 250 D-42391
3/16'', 1/4'' x 4-1/2'', 7/32'', 1/4'', 5/16'', 3/8'', 1/2'' x 6-1/4'', 9/16'' x
Cold chisel 20 x 250 6-1/2'', 1/4'' x 8-1/4'', 5/16'', 3/8'', 1/2'' x 10''
5.5, 6, 6.5, 8, 10 x 160, 10, 12, 16 x 210 Bull point 5-1/2'', 10''
D-53637
Bull point 250 D-70904 Cold chisel 3/4'' x 5-1/2'', 3/4'' x 10''
Cold chisel 20 x 250
Scaling chisel 1-1/2'' x 10''
13pcs. assortment
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12, 14 x 160, 16 x 210
Bull point 250 D-42400
Cold chisel 20 x 250
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12 x 160, 14, 16 x 460
Bull point 250 D-42416
Cold chisel 20 x 250
14pcs. assortment
5, 6, 7, 8 x 110, 6, 7, 8, 10, 12, 14 x 160, 10, 12, 14, 16 x 210 D-42422
17pcs. assortment
5, 5.5, 6, 8, 10 x 110, 6, 7, 8, 10 x 160, 8, 10 x 210, 14 x 260
Bull point 140, 250
D-42438
Cold chisel 20 x 140, 20 x 250
Scaling chisel 40 x 250
5, 6, 8, 10 x 110, 6, 8, 10, 12 x 160, 8, 10 x 210, 12, 14 x 260
Bull point 140, 250
D-42444
Cold chisel 20 x 140, 20 x 250
Scaling chisel 40 x 250
Tools for SDS-MAX Hammers T.C.T drill bit for SDS-MAX hammers

Bit diameter Overall Working

Type Part No.
(mm) length (mm) length (mm)
12 340 200 2 cutter D-33875
12 540 400 2 cutter D-33881
T.C.T drill bit for SDS-MAX hammers/ Nemesis MAX
*Massive carbide tip provicles optimal drilling performance 12.7 340 200 2 cutter D-54994
*No seizing up on hitting reinforcing steel. 14 340 200 2 cutter D-33897
*Ensure precision drill holes.
*Drills more precisely 14 540 400 2 cutter D-33906
*Low vibration and high fracture resistance. 14.3 340 200 2 cutter D-55011
15 340 200 2 cutter D-33912
15 540 400 2 cutter D-33928
16 340 200 2 cutter D-33934
16 540 400 2 cutter D-33940
18 340 200 2 cutter D-33956
18 540 400 2 cutter D-33962
19 340 200 2 cutter D-55033
Bit diameter Overall Working
Type Part No. 19 540 400 2 cutter D-55055
(mm) length (mm) length (mm)
12 340 200 4 cutter head B-19897 20 340 200 2 cutter D-33978
20 540 400 2 cutter D-33984
12 540 400 4 cutter head B-19906
12 740 600 4 cutter head B-19912 22 340 200 2 cutter D-33990
22 540 400 2 cutter D-34001
14 340 200 4 cutter head B-19928
24 340 200 2 cutter D-34017
14 540 400 4 cutter head B-19934
24 540 400 2 cutter D-34023
15 340 200 4 cutter head B-19940
25 340 200 2 cutter D-34039
15 540 400 4 cutter head B-19956
16 340 200 4 cutter head B-19962 25 540 400 2 cutter D-34045

16 540 400 4 cutter head B-19978 28 370 250 2 cutter D-34051

28 570 450 2 cutter D-34067
16 940 800 4 cutter head B-19984
30 370 250 2 cutter D-34073
18 340 200 4 cutter head B-19990
30 570 450 2 cutter D-34089
18 540 400 4 cutter head B-20002
32 370 250 2 cutter D-34095
18 940 800 4 cutter head B-20018
32 570 450 2 cutter D-34104
20 320 200 4 cutter head B-20024
20 520 400 4 cutter head B-20030 35 370 250 2 cutter D-34110
35 570 450 2 cutter D-34126
20 920 800 4 cutter head B-20046
38 370 250 2 cutter D-34132
22 320 200 4 cutter head B-20052
38 570 450 2 cutter D-34148
22 520 400 4 cutter head B-20068
40 370 250 2 cutter D-34154
22 920 800 4 cutter head B-20074
40 570 450 2 cutter D-34160
24 320 200 4 cutter head B-20080
24 520 400 4 cutter head B-20096 Size: inch
25 320 200 4 cutter head B-20105 Overall Working
Bit diameter Type Part No.
length length
25 520 400 4 cutter head B-20111
1/2'' 13'' 8'' 2 cutter D-36538
25 920 800 4 cutter head B-20127
1/2'' 21'' 16'' 2 cutter D-36544
26 520 400 4 cutter head B-20133
9/16'' 21'' 16'' 2 cutter D-36550
28 370 250 4 cutter head B-20149
5/8'' 13'' 8'' 2 cutter D-36566
28 570 450 4 cutter head B-20155
5/8'' 21'' 16'' 2 cutter D-36572
28 670 550 4 cutter head B-20161
3/4'' 13'' 8'' 2 cutter D-36588
28 920 800 4 cutter head B-20177
3/4'' 21'' 16'' 2 cutter D-36594
30 370 250 4 cutter head B-20183
27/32'' 21'' 16'' 2 cutter D-36603
30 570 450 4 cutter head B-20199
7/8'' 13'' 8'' 2 cutter D-36619
32 370 250 4 cutter head B-20208
7/8'' 21'' 16'' 2 cutter D-36625
32 570 450 4 cutter head B-20214
1'' 13'' 8'' 2 cutter D-36631
32 920 800 4 cutter head B-20220
1'' 21'' 16'' 2 cutter D-36647
35 370 250 4 cutter head B-20236
1-1/8'' 15'' 10'' 2 cutter D-36653
35 570 450 4 cutter head B-20242
1-1/8'' 22'' 18'' 2 cutter D-36669
35 670 550 4 cutter head B-20258
1-1/4'' 15'' 10'' 2 cutter D-36675
35 920 800 4 cutter head B-20264
1-1/4'' 22'' 18'' 2 cutter D-36681
38 370 250 4 cutter head B-20270
1-3/8'' 22'' 18'' 2 cutter D-36697
38 570 450 4 cutter head B-20286
1-1/2'' 22'' 18'' 2 cutter D-36706
40 370 250 4 cutter head B-20292
40 570 450 4 cutter head B-20301
40 920 800 4 cutter head B-20317
T.C.T drill bit for SDS-MAX hammers/ Mining T.C.T drill bit for SDS-MAX hammers
*Suitable for drillling into hard rock. (3 different sizes)
*Resharpenable.

Bit diameter Overall length Working length

Type Part No.
(mm) (mm) (mm)
16, 18, 20 340 200 2 cutter D-40587

Bit diameter Overall Working

Type Part No.
(mm) length (mm) length (mm)
32 570 450 Mining B-14613
T.C.T drill bit & chisel set for SDS-MAX hammers/
32 920 800 Mining B-15045 Aluminum case
*New generation of mining bits
*Suitable for drillling into hard rock.
*Resharpenable and bigger TCT
*Wider flutes exhaust the dust efficiently. 7pcs. assortment
*Longer life. Description Part No.
18, 20, 22, 25 x 540
Bull point 400
D-40571
Cold chisel 25 x 400
Scaling chisel 50 x 400
Bit diameter Overall Working
Type Part No.
(mm) length (mm) length (mm)
28 670 550 Mining B-39431 T.C.T drill bit & chisel set for SDS-MAX hammers/
30 720 600 Mining B-39447 Aluminum case in Makita blue
32 570 450 Mining B-39453
32 920 800 Mining B-39469

7pcs. assortment
Concrete core cutter for SDS-MAX hammers
Description Part No.
18, 20, 22, 25 x 540
Bit diameter Overall length
Part No.
(mm) (mm) Bull point 400
D-42494
40 550 B-57629 Cold chisel 25 x 400
45 550 B-57635 Scaling chisel 50 x 400
45 990 B-57641
55 550 B-57657
55 990 B-57663 Tools for Hex Shank Hammers
65 550 B-57679
65 990 B-57685
80 550 B-57691
80 990 B-57700 T.C.T drill bit for 17mm Hex shank hammers

T.C.T drill bit for SDS-MAX hammers/ Dustless

Overall length Working length

Bit diameter (mm) Part No.
(mm) (mm)
16 280 155 D-20127
16 505 365 D-20133
18 280 155 D-20149
18 505 365 D-20155
Bit diameter Overall length Working length
Part No.
(mm) (mm) (mm) 19 280 155 D-20161
16 600 400 B-64428 19 505 365 D-20177
18 600 400 B-64434
20 280 155 D-20183
20 600 400 B-64440
20 505 365 D-20199
22 600 400 B-64456
22 280 155 D-20208
24 600 400 B-64462
22 505 365 D-20214
25 600 400 B-64478
28 600 400 B-64484 26 280 155 D-20220

28 900 700 B-64490 26 505 365 D-20236

30 600 400 B-64509 28 280 155 D-20242
30 900 700 B-64515 28 505 365 D-20258
32 600 400 B-64521 32 280 140 D-20264
32 900 700 B-64537 32 505 360 D-20270
35 600 400 B-64543
35 280 140 D-20286
35 900 700 B-64559
35 505 360 D-20292
HSS-TiN metal drill bit for SDS-PLUS Hammers Drill bit set for SDS-PLUS Hammers
Fully ground HSS drill bit

Bit diameter Overall Working

Per pkg. Part No.
(mm) length (mm) length (mm)
3 90 33 1 B-57401
3.5 100 39 1 B-57417
4 105 43 1 B-57423 5pcs. assortment

4.5 110 47 1 B-57439 Description Part No.

5 116 52 1 B-57445 For metal 3, 4mm

B-57532
5.5 123 57 1 B-57451 For wood 4, 5, 6mm
6 123 57 1 B-57467
Size: inch
6.5 131 63 1 B-57473
For metal 1/8'', 3/16'', 1/4''
B-59243
For wood 3/16'', 1/4''
HSS-G metal drill bit for SDS-PLUS Hammers
Fully ground HSS drill bit
SDS-PLUS Sleeve chuck bit holder

Size: inch
Overall Working
Bit diameter Per pkg. Part No.
length length
1/8" 3-7/8" 1-9/16" 1 B-59106 With magnet
9/64" 4" 1-3/4" 1 B-59112
5/32" 4-1/4" 2" 1 B-59128 Length (mm) Shank Type Part No.
11/64" 4-3/8" 2-1/8" 1 B-59134 80 SDS-PLUS B-57548
3/16" 4-5/8" 2-3/8" 1 B-59140
13/64" 4-3/4" 2-7/16" 1 B-59156
7/32" 4-7/8" 2-1/2" 1 B-59162
15/64" 5" 2-5/8" 1 B-59178
1/4" 5-3/16" 2-3/4" 1 B-59184

Wood drill bit for SDS-PLUS Hammers

Bit diameter Overall Working

Per pkg. Part No.
(mm) length (mm) length (mm)
4 105 43 1 B-57489
5 116 52 1 B-57495
6 123 57 1 B-57504
8 147 75 1 B-57510
10 163 87 1 B-57526
Size: inch
Overall Working
Bit diameter Per pkg. Part No.
length length
5/32" 4-1/8" 1-1/16" 1 B-59190

3/16" 4-5/8" 2-3/64" 1 B-59209

1/4" 5-1/8" 2-1/2" 1 B-59215

5/16" 5-3/4" 2-15/16" 1 B-59221

3/8" 6-3/8" 3-7/16" 1 B-59237

Chisels

For For
SDS- SDS- 17mm 19mm 21mm 28.6mm 30mm Makita
Shape Application
PLUS MAX Hex Hex Hex Hex Hex Small
hammers hammers
Self sharpening bull point
Demolition and adjustment work in
masonry and concrete.
Chipping and breaking in masonry
and concrete.
Starts holes in concrete
 ·    · · 
No time consuming resharpening is
needed.

Bull point

Demolition and adjustment work in

masonry and concrete.
Chipping and breaking in masonry
and concrete.
· · · · · · · ·
Starts holes in concrete

Cold chisel

Adjustment work in masonry and

concrete.
Chipping, breaking, edging and
channeling in masonry and
· · · · · · · 
concrete.

Grooving chisel

Cutting channels in concrete.

·  ·  ·   ·
Scaling chisel

Removing concrete residues.

· · · · · · · ·
Clay spade

Digging in clay, hard gravel, hard

packed gravel, soil and dirt.  · · · · · · 
Rammer

Tamping asphalt and compacting

gravel, soil and dirt.  · · · · · · 
Bushing tool

Roughing concrete and asphalt up.

 · ·  ·   
Scraper

Scraping floor tiles,linoleum floord

and clean-up. ·       ·
Tools for SDS-PLUS Hammers Grooving chisel for SDS-PLUS hammers
(For grooving, channeling or removal of heavy scale, especially in narrow or
recessed areas.)

Bull point for SDS-PLUS hammers/ Self-sharpening Size(mm) Part No. Size(mm) Part No.
(For demolishing concrete)
8 x 170 A-30075 20 x 170 A-86686

12 x 170 A-86371

Length (mm) Part No.

250 B-64761 Scaling chisel for SDS-PLUS hammers/ Self-sharpening

(A wide chisel for chipping away scale of dried concrete spatter)

Premium Bull point for SDS-PLUS hammers/ Self-

sharpening
(For demolishing concrete)
Size(mm) Part No. Size(mm) Part No.

40 x 250 B-14059 60 x 250 B-14065

Length (mm) Part No.

250 B-64238 Premium Scaling chisel for SDS-PLUS hammers/ Self-

sharpening
(A wide chisel for chipping away scale
ca of dried concrete spatter)
spa
p )
Bull point for SDS-PLUS hammers
(For demolishing concrete)

Size(mm) Part No.

40 x 250 B-64250

Length (mm) Part No. Length (mm) Part No.

140 D-19152 250 B-14037 Scaling chisel for SDS-PLUS hammers

(A wide chisel for chipping away scale of dried concrete spatter)
160 D-08034 250 B-64294

250 D-08713 400 D-19015

Cold chisel for SDS-PLUS hammers/ Self-sharpening Size(mm) Part No. Size(mm) Part No.
(For chipping, edging, channeling and breaking away larger chunks of concrete) 38 x 200 A-30483 50 x 215 D-25616
40 x 250 D-08735 80x150 D-61042
40 x 250 B-64319 80x250 D-61020

Size(mm) Part No.

20 x 250 B-64777
Scraper assembly for SDS-PLUS hammers
(For removing linoleum tile and other flooring)

Premium Cold chisel for SDS-PLUS hammers/ Self-

sharpening
(For chipping, edging, channeling and breaking away larger chunks of concrete)
Length (mm) Type Part No.

100 - A-68161

100 Cutter 343411-9

Size(mm) Part No.

20 x 250 B-64244 Bull point, Cold chisel, Scaling chisel for SDS-PLUS
hammers
Cold chisel for SDS-PLUS hammers *Shrink package
(For chipping, edging, channeling and breaking away larger chunks of concrete)

㻌 㻌 㻌 㻌
Size(mm) Part No. Size(mm) Part No.
Type Size(mm) Part No.
20 x 140 D-19168 20 x 250 B-64303
Bull point 250 *D-62424
20 x 250 D-08729 20 x 400 D-19021
Cold Chisel 20 x 250 *D-62430
20 x 250 B-14043
Scaling chisel 50 x 215 *D-62446
Chisel set for SDS-PLUS hammers Tools for SDS-MAX Hammers

Bull point for SDS-MAX hammers/ Self-sharpening

Description Size (mm) Each Sum Part No. Length (mm) Part No.
Bull point 250 1 400 B-10621
Cold chisel 20 x 250 1 3 D-30134

Scaling chisel 40 x 250 1 Spin action Bull Point for SDS-MAX hammers/ Self-
Sharpening
Chisel set for SDS-PLUS hammers/ Aluminum case

Length (mm) Part No.

400 B-23064

Premium Bull point for SDS-MAX hammers

(For demolishing concrete)
Description Size (mm) Each Sum Part No.

Bull point 250 1

Cold chisel 20 x 250 1 3 D-05181

Length (mm) Part No.
Scaling chisel 40 x 250 1
400 B-64266
Bull point 250 2
4 D-08757
Cold chisel 20 x 250 2

Bull point 250 2

Bull point for SDS-MAX hammers
(For demolishing concrete)
Cold chisel 20 x 250 2 5 D-16368 *10pcs. set

Scaling chisel 40 x 250 1

Chisel set for SDS-PLUS hammers/ Aluminum case in

Length (mm) Part No. Length (mm) Part No.
Makita blue
280 A-80787 400 A-80793

300 D-34176 400 *D-34182-10

400 D-34182 600 A-87476

Cold chisel for SDS-MAX hammers/ Self-sharpening

(For chipping, edging, channeling and breaking away larger chunks of concrete)

Description Size (mm) Each Sum Part No.

Bull point 250 1

Cold chisel 20 x 250 1 3 D-42357

Scaling chisel 40 x 250 1

Size (mm) Part No.
Bull point 250 2
25x400 B-64783
4 D-42363
Cold chisel 20 x 250 2

Bull point 250 2

Premium Cold chisel for SDS-MAX hammers/ Self-
Cold chisel 20 x 250 2 5 D-42379 sharpening
Scaling chisel 40 x 250 1 (For chipping, edging, channeling and breaking away larger chunks of concrete)

Size (mm) Part No.

25x400 B-64272
Cold chisel for SDS-MAX hammers Bushing tool for SDS-MAX hammers
(For chipping, edging, channeling and breaking away larger chunks of concrete) (For concrete surface removal)
*10pcs. set • Use with shank (A-19897)

Size (mm) Part No. Size (mm) Part No. Size (mm) Part No.

25 x 280 A-80802 25 x 400 B-14009 67 x 67 A-19881

25 x 300 D-34207 25 x 400 *D-34213-10

25 x 400 D-34213 24 x 600 A-87482 Rammer for SDS-MAX hammers

25 x 400 A-80818
(For tamping)
• Use with shank (A-19897)
Scaling chisel for SDS-MAX hammers/ Self-sharpening
(A wide chisel for chipping away scale of dried concrete spatter)

Diameter (mm) Part No.

140 A-19875
Size (mm) Part No.

50x350 B-14015
Chisel set for SDS-MAX hammers

Premium Scaling chisel for SDS-MAX Hammers/ Self-

sharpening
(A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Type Part No.

Size (mm) Part No.
400 Bull point
50x380 B-64288 D-35324-10
25 x 400 Cold chisel

Scaling chisel for SDS-MAX hammers

(A wide chisel for chipping away scale of dried concrete spatter) Chisel set for SDS-MAX hammers/ Aluminum case

Size (mm) Part No. Size (mm) Part No.

50 x 400 A-80824 80 x 300 D-34241

50 x 400 D-34235   Description Size (mm) Each Sum Part No.

Bull point 400 1

Scaling chisel for Tile for SDS-MAX hammers Cold chisel 25 x 400 1 3 D-40543

Scaling chisel 50 x 400 1

Bull point 300 1

Bull point 400 1

4 D-40559
Cold chisel 25 x 300 1
Size (mm) Part No. Size (mm) Part No.
Cold chisel 25 x 400 1
50 x 300 A-80830 50 x 300 B-14021
Bull point 400 3
5 D-40618
Cold chisel 25 x 400 2
Clay spade for SDS-MAX hammers Bull point 400 2

Cold chisel 25 x 400 2

6 D-40565
Scaling chisel 50 x 400 1

Scaling chisel 80 x 300 1

Size (mm) Part No.

105 x 400 A-17653

Chisel set for SDS-MAX hammers/ Aluminum case in Grooving chisel for 17mm Hex shank hammers
(For grooving, channeling or removal of heavy scale,
Makita blue especially in narrow or recessed areas.)

Size (mm) Part No. Size (mm) Part No.

22 x 280 A-48555 26 x 280 A-48561

Description Size (mm) Each Sum Part No.

Scaling chisel for 17mm Hex shank hammers
Bull point 400 1 (A wide chisel for chipping away scale of dried concrete spatter)
Cold chisel 25 x 400 1 3 D-42450

Scaling chisel 50 x 400 1

Bull point 300 1

Size (mm) Part No. Size (mm) Part No.
Bull point 400 1
4 D-42466 50 x 280 A-80606 50 x 450 D-52548
Cold chisel 25 x 300 1
50 x 280 D-20694
Cold chisel 25 x 400 1

Bull point 400 3

5 D-42472
Cold chisel 25 x 400 2 Clay spade for 17mm Hex shank hammers
Bull point 400 2

Cold chisel 25 x 400 2

6 D-42488
Scaling chisel 50 x 400 1

Scaling chisel 80 x 300 1

Size (mm) Part No.

105 x 400 A-25214

Tools for 17mm Hex Shank Hammers

Bushing tool for 17mm Hex shank hammers

(For concrete surface removal)

Bull point for 17mm Hex shank hammers

(For demolishing concrete)

Size (mm) Part No.

60 x 60 A-21484

Length (mm) Part No. Length (mm) Part No.

210 D-16374 450 A-80547

Rammer for 17mm Hex shank hammers
(For tamping)
280 A-80450 450 D-16863

280 D-08682

Bull point for 17mm Hex shank hammers/ Sharper

edge
Diameter (mm) Part No.

140 A-21428

Length (mm) Part No. Length (mm) Part No.

280 D-26303 350 D-29860

Cold chisel for 17mm Hex shank hammers

(For chipping, edging, channeling and breaking away larger chunks of concrete)

Size (mm) Part No. Size (mm) Part No.

17 x 280 A-80569 17 x 450 A-80575
19 x 210 D-26587 19 x 450 D-16879
19 x 280 D-08707
Tools for 19mm Hex shank hammers Tools for 21mm Hex shank hammers

Bull point for 19mm Hex shank hammers Bull point for 21mm Hex shank hammers
(For demolishing concrete) (For demolishing concrete)

Length (mm) Part No. Length (mm) Part No.

Length (mm) Part No. Length (mm) Part No. 320 D-16499 450 D-23824
300 D-20074 450 D-19196 450 A-80553 600 D-30994

Cold chisel for 19mm Hex shank hammers Cold chisel for 21mm Hex shank hammers
(For chipping, edging, channeling and breaking away larger chunks of concrete) (For chipping, edging, channeling and breaking away larger chunks of concrete)

Length (mm) Part No. Length (mm) Part No.

Size (mm) Part No. Size (mm) Part No. 26 x 320 D-17588 26 x 450 D-17594
26 x 300 D-20080 26 x 450 D-19205 26 x 450 A-80581

Scaling chisel for 19mm Hex shank hammers Scaling chisel for 21mm Hex shank hammers
(A wide chisel for chipping away scale of dried concrete spatter) (A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Part No.

70 x 320 D-20672
Size (mm) Part No.

50 x 300 D-20096
Grooving chisel for 21mm Hex shank hammers
(For grooving, channeling or removal of heavy scale, especially in narrow or
recessed areas.)

Clay spade for 19mm Hex shank hammers

Size (mm) Part No.

26 x 370 798274-2

Clay spade for 21mm Hex shank hammers

Size (mm) Part No.

105 x 400 798148-7 Size (mm) Part No.

130 x 460 A-47391

Rammer for 19mm Hex shank hammers Bushing tool for 21mm Hex shank hammers
(For tamping) (For concrete surface removal)

Size (mm) Part No.

60 x 60 A-21490

Diameter (mm) Part No.

Rammer for 21mm Hex shank hammers
140 A-21478 (For tamping)

Diameter (mm) Part No.

140 A-21434
Tools for 28.6mm Hex Shank Hammers Clay spade for 28.6mm Hex shank hammers

With Brim

Without Brim
Size (mm) Brim Part No.

140 x 546 Without A-44644

Self sharpening bull point for 28.6mm Hex shank

hammers Rammer for 28.6mm Hex shank hammers
(For demolishing concrete) (For tamping)

Length (mm) Brim Part No.

400 Without B-10372

Diameter (mm) Brim Part No.

Bull point for 28.6mm Hex shank hammers
(For demolishing concrete) 200 Without 798385-3

Tools for 30mm Hex shank hammers

Length (mm) Brim Part No.

350 with D-65034

410 with 798381-1

410 with D-17631

410 without D-61531 Self sharpening bull point for 30mm Hex shank
520 with D-17675 hammers
(For demolishing concrete)
520 without D-61569

Cold chisel for 28.6mm Hex shank hammers Length (mm) Part No.
(For chipping, edging, channeling and breaking away larger chunks of concrete)
400 B-10388

Bull point for 30mm Hex shank hammers

Size (mm) Brim Part No. (For demolishing concrete)

28 x 410 with 798383-7

28 x 410 with D-17647

28 x 410 without D-61547

Length (mm) Part No.
28 x 520 with D-17681
400 D-15285
28 x 520 without D-61575
410 A-80466

Scaling chisel for 28.6mm Hex shank hammers

(A wide chisel for chipping away scale of dried concrete spatter) Cold chisel for 30mm Hex shank hammers
(For chipping, edging, channeling and breaking away larger chunks of concrete)

Size (mm) Brim Part No.

75 x 410 with D-29228 Size (mm) Part No.

75 x 410 without D-61553 30 x 400 D-15300

75 x 520 with D-20725

75 x 520 without D-61581

Scaling chisel for 30mm Hex shank hammers Tools for Makita small shank
(A wide chisel for chipping away scale of dried concrete spatter)

Bull point for Makita small shank

Size (mm) Part No.

75 x 310 D-23868 Length (mm) Part No.

220 B-06921
Clay spade for 30mm Hex shank hammers
Scaling chisel for Makita small shank
(A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Part No. Size (mm) Part No. Size (mm) Part No.

30 x 150 B-07331 20 x 220 B-07004

120 x 500 B-10300
50 x 150 B-07347 50 x 220 B-07010

Rammer for 30mm Hex shank hammers

(For tamping) Grooving chisel for Makita small shank
(For grooving, channeling or removal of heavy scale,
especially in narrow or recessed areas.)

Size (mm) Part No. Size (mm) Part No.

8 x 170 A-21543 20 x 170 798297-0

Diameter (mm) Part No.
12 x 170 A-21559
200 A-31485

Scraper assembly for Makita small shank

(For removing linoleum tile and other flooring)

Size (mm) Type Part No.

100 - A-68155

100 Cutter 343411-9

ACCESSORIES
Fastening

Hex (H) PZ Square (SQ) Slotted (SL)

T Phillips (PH) TH With magnet

Made of chrome-molybdenum Made of chrome-molybdenum

alloy steel alloy steel For 3/8" square drive For 1/2" square drive
Accessories 65

Fastener drive and screwdriving series

(Wood/Metal)
Drilling
1. C-form

(Masonry)
Drilling
Fastening
2. E-form

Screw Bit Sets

Drill and
3. Double-end

Cutting
4. Bit holder

Reciprosawing
Jigsaw /
Brushing
5. Nutsetter

6. Bit Set

7. Socket adapter
/ Socket bit

8. Impact socket

9. Other
 66 Accessories
(Wood/Metal)
Drilling

v
(Masonry)
Drilling
Fastening

Torsion Screw Bit Torsion Bit Holder

Screw Bit Sets
Drill and

25mm Non-Mag & 50mm Mag

ShorTon Screw Bit

Cutting

The total length is 30mm. Extremely Short Torsion Bit.

Suitable for working in the small spaces.
Reciprosawing
Jigsaw /

Standard

Standard Standard Standard

The extra strong magnet holds even long

g screws securely for accurate
driving.
Brushing

Torsion Grip Bit Wood Mag boostt

< Multi purpose use > < Stronger magnetism >

Bonded Abrasive

Specifically suited to provide a stronger connection

i b between screw
and tip. (Available in Ph2 only - 25mm Non-Mag & 50mm Mag)

Torsion Enduro Bit Metal

Coated Abrasive

Ring Nut Setter

Specifically suited to provide a longer lasting connection between screw

+ tip in metal fastening applications.
Multi Tool

(Available in Ph2 only - 25mm Non-Mag & 50mm Mag)

Double Ended Torsion Screw

rew Bit
The spring-loaded clip retains the fastener, eliminating all build up of
Diamond

swarf on the magnet which prevents correct fastener connection.

Detachable Nutsetter
Able to use both sides of the bit.
It works as much as 2 regular bits.
Routering

Socket and Shank is detachable.

Planing /

1. Easy to clean the debris.

2. Able to select Socket and Shank material and hardness separately and
realize high durability (20 times).

Tilt Socket Adapter

OPE
Miscellaneous

The socket can tilt up to 15°angle to assist fastening in confined applications.

 Length Shank
Bit piece for screwdriver & impact driver Size
(mm) Type
Per pkg. Part No.
You can change from MZ type bit to NZ type bit.
H 1.5 25 C-form 3 B-23662
MZ type H 2.0 25 C-form 3 B-23678
NZ type
H 2.5 25 C-form 3 B-23684
H 3.0 25 C-form 3 B-23690
H 4.0 25 C-form 3 B-23709
H 5.0 25 C-form 3 B-23715
H 6.0 25 C-form 3 B-23721
H 8.0 25 C-form 3 B-23737
Part No.
H 1/16’’ 25 C-form 3 B-24256
322279-6
H 5/64’’ 25 C-form 3 B-24262
H 3/32’’ 25 C-form 3 B-24278

Drive type H 7/64’’ 25 C-form 3 B-24284

H 1/8’’ 25 C-form 3 B-24290
Phillips Square Slotted
PZ Hex (H) T TH H 9/64’’ 25 C-form 3 B-24309
(PH) (SQ) (SL)
H 5/32’’ 25 C-form 3 B-24315
H 3/16’’ 25 C-form 3 B-24321
H 7/32’’ 25 C-form 3 B-24337
H 1/4’’ 25 C-form 3 B-24343
H 5/16’’ 25 C-form 3 B-24359
H 3/8’’ 25 C-form 3 B-24365
1. Screw bit (C-form) SQ 0 25 C-form 3 B-24147

Screw bit (C-form) 3pcs. set / Blister pack SQ 1 25 C-form 3 B-23743

SQ 2 25 C-form 3 B-23759
SQ 3 25 C-form 3 B-23765

Screw bit (C-form) 25pcs. set / Flip top case

Length Shank
Size Per pkg. Part No.
(mm) Type
PH 0 25 C-form 3 B-23444
PH 1 25 C-form 3 B-23450
PH 2 25 C-form 3 B-23466
Length
PH 3 25 C-form 3 B-23472 Size Shank Type Per pkg. Part No.
(mm)
PH1,PH2,PH3 25 C-form 3 B-24511
PH 1 25 C-form 25 B-24577
PZ 1 25 C-form 3 B-23488
PH 2 25 C-form 25 B-24583
PZ 2 25 C-form 3 B-23494
PZ 3 25 C-form 3 B-23503 PH 3 25 C-form 25 B-24599
PZ1,PZ2,PZ3 25 C-form 3 B-24527 PZ 1 25 C-form 25 B-24608
SL 0.5x4.0 25 C-form 3 B-23519
PZ 2 25 C-form 25 B-24614
SL 0.6x4.5 25 C-form 3 B-23525
SL 0.8x5.5 25 C-form 3 B-23531 PZ 3 25 C-form 25 B-24620
SL 1.0x5.5 25 C-form 3 B-23547 SL 6-8 25 C-form 25 B-24810
SL 1.2x6.5 25 C-form 3 B-23553
SL 8-10 25 C-form 25 B-24826
SL 1.2x8.0 25 C-form 3 B-23569
T 15 25 C-form 25 B-24636
SL 1.6x8.0 25 C-form 3 B-23575
SL 3-4 25 C-form 3 B-24181 T 20 25 C-form 25 B-24642
SL 4-5 25 C-form 3 B-24197 T 25 25 C-form 25 B-24658
SL 5-6 25 C-form 3 B-24206
T 30 25 C-form 25 B-24664
SL 6-8 25 C-form 3 B-24212
SL 8-10 25 C-form 3 B-24228 SQ 2 25 C-form 25 B-24670
SL 10-12 25 C-form 3 B-24234
SL 12-14 25 C-form 3 B-24240
Screw bit (C-form) 100pcs. set / Mini candy jar
T6 25 C-form 3 B-24402
T7 25 C-form 3 B-24418
T8 25 C-form 3 B-23581
T9 25 C-form 3 B-24430
T 10 25 C-form 3 B-23597
T 15 25 C-form 3 B-23606 Size Length (mm) Shank Type Per pkg. Part No.
T 20 25 C-form 3 B-23612
PH 2 25 C-form 100 B-24876
T 25 25 C-form 3 B-23628
T 27 25 C-form 3 B-23634 PZ 2 25 C-form 100 B-24882
T 30 25 C-form 3 B-23640 SQ 2 25 C-form 100 B-24898
T 40 25 C-form 3 B-23656
T20,T25,T30 25 C-form 3 B-24533
Screw bit (C-form) 250pcs. set / Candy jar Torsion screw bit (C-form) / Blister pack

Size Length (mm) Shank Type Per pkg. Part No. Length
Size Shank Type Per pkg. Part No.
(mm)
PH 2 25 C-form 250 B-62452 PH 1 25 C-form 2 B-28329
PH 2 25 C-form 2 B-28335
PH 2 25 C-form 2 B-62337
Screw bit (C-form) 100pcs. set / Plastic bag PH 2 25 C-form 5 B-28357
PH 3 25 C-form 2 B-28341
PZ 1 25 C-form 2 B-28444
PZ 2 25 C-form 2 B-28450
PZ 2(slim) 25 C-form 2 B-62343
PZ 2 25 C-form 5 B-28472
Size Length (mm) Shank Type Per pkg. Part No.
PZ 3 25 C-form 2 B-28466
PH 2 25 C-form 100 B-24957 T 10 25 C-form 2 B-28391
T 15 25 C-form 2 B-28400
PZ 2 25 C-form 100 B-24963
T 20 25 C-form 2 B-28416
SQ 2 25 C-form 100 B-24979 T 25 25 C-form 2 B-28422
T 30 25 C-form 2 B-28438
SQ 1 25 C-form 2 B-28363
Screw bit (C-form) for screwdriver SQ 2 25 C-form 2 B-28379
SQ 3 25 C-form 2 B-28385

Length Shank
Size
(mm) Type
Per pkg. Model No. Part No. Torsion grip bit (C-form) for wood / Blister pack
PH 2 25 C-form 3 DFS440 798398-4

PH 3 25 C-form 3 DFS450 798314-6

Length
Size Shank Type Per pkg. Part No.
Dry wall bit (C-form) / Bister pack (mm)
PH 2
25 C-form 2 B-28488
(Grip)
PH 2
25 C-form 5 B-28494
(Grip)

Torsion enduro bit (C-form) for metal / Blister pack

Length
Size Shank Type Per pkg. Part No.
(mm)
PH 2 30 C-form 1 D-61690

Length
Size Shank Type Per pkg. Part No.
(mm)
Screw bit (C-form) 2pcs. set / Blister pack PH 2
25 C-form 2 B-28503
(Enduro)
PH 2
25 C-form 5 B-28519
(Enduro)

Torsion screw bit (C-form) 10pcs. set / Flip top case with
hanger display

Length Shank
Size Per pkg. Part No.
(mm) Type
PH1 25 C-form 2 B-63600
PH2 25 C-form 2 B-63616
PH3 25 C-form 2 B-63622
PZ1 25 C-form 2 B-63638 B-XXXXX-10 contains 10 sets of B-XXXXX with hanger display
Length
PZ2 25 C-form 2 B-63644 Size Shank Type Per pkg. Part No.
(mm)
PZ3 25 C-form 2 B-63650 PH 2 25 C-form 10 B-39512-10
T15 25 C-form 2 B-63666
PZ 2 25 C-form 10 B-39534-10
T20 25 C-form 2 B-63672
T25 25 C-form 2 B-63688 SQ 2 25 C-form 10 B-39556-10
T30 25 C-form 2 B-63694
T40 25 C-form 2 B-63703
 Length Shank
Size Per pkg. Part No.
2. Screw bit (E-form) 1/4''Hex (NZ)
(mm) Type

Screw bit (E-form) 3pcs. set / Blister pack PH1 50 NZ 3 B-25068

PH2 50 NZ 3 B-25074
PH3 50 NZ 3 B-25080
PH1,PH2,PH3 50 NZ 3 B-25105
With magnet

Screw bit (E-form) / Blister pack

1/4''Hex (MZ) 50mm
Length Shank
Size Per pkg. Part No.
(mm) Type
PH 1 50 MZ 3 B-25214 With magnet
1/4''Hex (MZ)
PH 2 50 MZ 3 B-25220
Length
PH 3 50 MZ 3 B-25236 Size Shank Type Per pkg. Part No.
(mm)
PH1,PH2,PH3 50 MZ 3 B-26179 PH 1 90 MZ 1 B-57772
PZ 1 50 MZ 3 B-25242 PH 2 90 MZ 1 B-57788
PZ 2 50 MZ 3 B-25258 PH 3 90 MZ 1 B-57794
PZ 3 50 MZ 3 B-25264 PZ 1 90 MZ 1 B-59879
PZ1,PZ2,PZ3 50 MZ 3 B-26185 PZ 2 90 MZ 1 B-59885
SL 0.5x3.0 50 MZ 3 B-25270 PZ 3 90 MZ 1 B-59891
SL 0.5x4.0 50 MZ 3 B-25286 T 15 90 MZ 1 B-59900
SL 0.6x4.5 50 MZ 3 B-25292 T 20 90 MZ 1 B-59916
SL 0.8x5.5 50 MZ 3 B-25301 T 25 90 MZ 1 B-59922
SL 1.0x5.5 50 MZ 3 B-25317 T 30 90 MZ 1 B-59938
SL 1.2x6.5 50 MZ 3 B-25323 SQ 1 90 MZ 1 B-57803
SL 1.2x8.0 50 MZ 3 B-25339 SQ 2 90 MZ 1 B-57819
SL 1.6x8.0 50 MZ 3 B-25345 SQ 3 90 MZ 1 B-57825
SL 3-4 50 MZ 3 B-25878 1/4''Hex (MZ) 
SL 4-5 50 MZ 3 B-25884 PH 1 150 MZ 1 B-57831
SL 5-6 50 MZ 3 B-25890 PH 2 150 MZ 1 B-57847
SL 6-8 50 MZ 3 B-25909 PH 3 150 MZ 1 B-57853
SL 8-10 50 MZ 3 B-25915 PZ 1 150 MZ 1 B-59944
SL 10-12 50 MZ 3 B-25921 PZ 2 150 MZ 1 B-59950
SL 12-14 50 MZ 3 B-25937 PZ 3 150 MZ 1 B-59966
T6 50 MZ 3 B-26060 T 15 150 MZ 1 B-59972
T7 50 MZ 3 B-26076 T 20 150 MZ 1 B-59988
T8 50 MZ 3 B-25351 T 25 150 MZ 1 B-59994
T9 50 MZ 3 B-25367 T 30 150 MZ 1 B-60006
T 10 50 MZ 3 B-25373 SQ 1 150 MZ 1 B-57869
T 15 50 MZ 3 B-25389 SQ 2 150 MZ 1 B-57875
T 20 50 MZ 3 B-25395 SQ 3 150 MZ 1 B-57881
T 25 50 MZ 3 B-25404
T 27 50 MZ 3 B-25410
T 30 50 MZ 3 B-25426
Screw bit (E-form) 10pcs. set / Flip top case
T 40 50 MZ 3 B-25432
T20,T25,T30 50 MZ 3 B-26191
H 3.0 50 MZ 3 B-25448 With magnet
1/4''Hex (MZ)
H 4.0 50 MZ 3 B-25454 Length
Size Shank Type Per pkg. Part No.
H 5.0 50 MZ 3 B-25460 (mm)
H 6.0 50 MZ 3 B-25476 PH 1 50 MZ 10 B-26238
H 1/16’’ 50 MZ 3 B-25943 PH 2 50 MZ 10 B-26244
H 5/64’’ 50 MZ 3 B-25959 PH 3 50 MZ 10 B-26250
H 3/32’’ 50 MZ 3 B-25965 PZ 1 50 MZ 10 B-26266
H 7/64’’ 50 MZ 3 B-25971 PZ 2 50 MZ 10 B-26272
H 1/8’’ 50 MZ 3 B-25987 PZ 3 50 MZ 10 B-26288
H 9/64’’ 50 MZ 3 B-25993 SL 6-8 50 MZ 10 B-26478
H 5/32’’ 50 MZ 3 B-26004 SL 8-10 50 MZ 10 B-26484
H 3/16’’ 50 MZ 3 B-26010 T 15 50 MZ 10 B-26294
H 1/4’’ 50 MZ 3 B-26026
T 20 50 MZ 10 B-26303
SQ 1 50 MZ 3 B-25482
T 25 50 MZ 10 B-26319
SQ 2 50 MZ 3 B-25498
T 30 50 MZ 10 B-26325
SQ 3 50 MZ 3 B-25507
SQ 2 50 MZ 10 B-26331
 Length
Size
(mm)
Shank Type Per pkg. Part No. Screw bit (E-form) for screwdriver / 5pcs. set
1/4''Hex (NZ)
PH1 50 NZ 10 B-25149
1/4''Hex (NZ)
PH2 50 NZ 10 B-25155
Length Shank Per
PH3 50 NZ 10 B-25161 Size Model No. Part No.
(mm) Type pkg.
PH 2 122 NZ 5 DFR440, 6845, 6841R A-45858

Screw bit (E-form) 50pcs. set / Mini candy jar PH 2 132 NZ 5 6833 series, 6835D A-16536
6842, 6843, DFR540,
PH 2 162 NZ 5 B-10481
DFR550
PH 2 182 NZ 5 6844, DFR750 B-10475
With magnet

1/4''Hex (MZ) Dry wall bit (E-form) / Blister pack

Length 1/4''Hex (MZ)
Size Shank Type Per pkg. Part No.
(mm) Length Shank
Size Per pkg. Part No.
PH 2 50 MZ 50 B-26490 (mm) Type

PZ 2 50 MZ 50 B-26509 PH 2 50 MZ 1 B-60399

SQ 2 50 MZ 50 B-26515

1/4''Hex (NZ) Screw bit (E-form) 2pcs. set / Blister pack

PH 2 50 NZ 50 B-25183

Screw bit (E-form) 100pcs. set / Candy jar

1/4''Hex (MZ)
With magnet Length Shank
Size Per pkg. Part No.
1/4''Hex (MZ) (mm) Type
Length PH1 50 MZ 2 B-63719
Size Shank Type Per pkg. Part No.
(mm)
PH2 50 MZ 2 B-63725
PH 2 50 MZ 100 B-62468 PH3 50 MZ 2 B-63731
PZ1 50 MZ 2 B-63747

Screw bit (E-form) 50pcs. set / Plastic bag PZ2 50 MZ 2 B-63753

PZ3 50 MZ 2 B-63769
T15 50 MZ 2 B-63775

With magnet T20 50 MZ 2 B-63781

1/4''Hex (MZ) T25 50 MZ 2 B-63797
Length
Size Shank Type Per pkg. Part No. T30 50 MZ 2 B-63806
(mm)
T40 50 MZ 2 B-63812
PH 2 50 MZ 50 B-26571

PZ 2 50 MZ 50 B-26587
Silver torsion screw bit (E-form) / Blister pack
SQ 2 50 MZ 50 B-26593

1/4''Hex (NZ)
With magnet
PH 2 50 NZ 50 B-25208

Screw bit (E-form) / Blister pack 1/4''Hex (MZ)

1/4''Hex (MZ) Size Length (mm) Shank Type Per pkg. Part No.
Length PH2 (Slim) 100 MZ 1 B-56948
Size Shank Type Per pkg. Part No.
(mm)
PZ2 (Slim) 100 MZ 1 B-56954
PH 0 (Slim) 85 MZ 1 B-42575
* Japanese Package
PH 2 110 MZ 3 784234-0
1/4''Hex (NZ)
1/4''Hex (NZ)
PH1 (Slim) 65 NZ 3 A-57451 *
PH 2 117 NZ 5 A-12697
PH1 (Slim) 100 NZ 3 A-57467 *
SL 0.6x5.0 45 NZ 3 798301-5 PH2 (Slim) 65 NZ 3 A-57473 *
SL0.8x6.0 70 NZ 3 798298-8 PH2 (Slim) 65 NZ 6 A-57510 *
SL1.0x6.35 45 NZ 3 798299-6 PH2 (Slim) 85 NZ 3 A-57489 *
SL1.2x8.0 45 NZ 3 798300-7 PH2 (Slim) 85 NZ 6 A-57526 *
SL1.2x8.0 70 NZ 3 798302-3 PH2 (Slim) 100 NZ 3 A-57495 *
SL1.2x10.0 52 NZ 3 798303-1 PH2 (Slim) 100 NZ 6 A-57532 *
SL1.4x10.0 52 NZ 1 784018-6 PH2 (Slim) 120 NZ 3 A-57504 *
PH2 (Slim) 120 NZ 6 A-57445 *
Torsion screw bit (E-form) / Blister pack ShorTon Screw bit (E-form) 2pcs. set / Blister pack
The total length is 30mm. Extremely Short Torsion Bit. Suitable for working in the
small spaces.

With magnet

With magnet

1/4''Hex (MZ)
Length Shank
Size Per pkg. Part No.
(mm) Type
PH 1 50 MZ 2 B-28167
PH 2 (Dbl-torsion) 50 MZ 2 B-39160
PH 2 (Slim) 50 MZ 2 B-62359 1/4''Hex (MZ)
PH 3 50 MZ 2 B-28189 Length
Size Shank Type Per pkg. Part No.
PZ 1 50 MZ 2 B-28276 (mm)
PH1 30 MZ 2 B-42189
PZ 2 (Dbl-torsion) 50 MZ 2 B-39182
PH2 (Dbl-
PH 2 (Slim) 50 MZ 2 B-62365 30 MZ 2 B-42195
torsion)
PZ 3 50 MZ 2 B-28298 PH3 30 MZ 2 B-42204
T 10 50 MZ 2 B-28226 PZ1 30 MZ 2 B-42210
T 15 50 MZ 2 B-28232 PZ2 (Dbl-
30 MZ 2 B-42226
torsion)
T 20 50 MZ 2 B-28248
PZ3 30 MZ 2 B-42232
T 25 50 MZ 2 B-28254
T10 30 MZ 2 B-42248
T 30 50 MZ 2 B-28260
T15 30 MZ 2 B-42254
SQ 1 50 MZ 2 B-28195
T20 30 MZ 2 B-42260
SQ 2 50 MZ 2 B-28204
T25 30 MZ 2 B-42276
SQ 3 50 MZ 2 B-28210
T30 30 MZ 2 B-42282
SQ1 30 MZ 2 B-42298
Torsion grip bit (E-form) for wood / Blister pack SQ2 30 MZ 2 B-42307
SQ3 30 MZ 2 B-42313
H2.5 30 MZ 2 B-42329
With magnet H3.0 30 MZ 2 B-42335
H4.0 30 MZ 2 B-42341

1/4''Hex (MZ)
Length Shank
Size
(mm) Type
Per pkg. Part No. 3. Double-end
PH 2 (Grip) 50 MZ 2 B-28307
Screw bit (Double-end) 10pcs. set / Blister pack

Torsion enduro bit (E-form) for metal / Blister pack

With magnet

With magnet

1/4''Hex (MZ)
1/4''Hex (MZ) Length
Size Shank Type Per pkg. Part No.
Length Shank (mm)
Size Per pkg. Part No.
(mm) Type PH 2 65 MZ 10 D-34366
PH 2 (Enduro) 50 MZ 2 B-28313 PH 2 110 MZ 10 D-34849
1/4''Hex (NZ)
PH 2 45 NZ 10 D-34827
Torsion screw bit (E-form) 10pcs. set / Flip top case with
PH 2 65 NZ 10 D-33679
hanger display
PH 2 110 NZ 10 D-34833
Straight

With magnet
PH 2-SL 5 110 Straight 10 D-65551

B-XXXXX-10 contains 10 sets of B-XXXXX with hanger display

1/4''Hex (MZ)
Size Length (mm) Shank Type Per pkg. Part No.
PH 2 (Dbl-
50 MZ 10 B-42874-10
torsion)
PZ 2 50 MZ 10 B-39540-10

SQ 2 50 MZ 10 B-39562-10
Screw bit (Double-end) 100pcs. set / Candy jar Silver torsion screw bit (Double-end) / Blister pack

With magnet With magnet

1/4''Hex (MZ)
Length
Size Shank Type Per pkg. Part No. 1/4''Hex (MZ)
(mm)
Shank
Size Length (mm) Per pkg. Part No.
PH 1 65 MZ 100 D-65517 Type
PH 1 65 MZ 3 B-21836
PH 2 65 MZ 100 D-31669
PH 1 85 MZ 3 B-21842
PZ 2 65 MZ 100 D-34914 PH 1 110 MZ 3 B-21858
PH 2 65 MZ 3 B-20703
SQ 2 50 MZ 100 D-34920
PH 2 85 MZ 3 B-12326
1/4''Hex (NZ) PH 2 110 MZ 3 B-21864
PH 2 65 NZ 100 D-31653 PH 3 65 MZ 3 B-21870
PH 3 85 MZ 3 B-21886
PH 2(Slim) 65 NZ 100 D-63959
PH 3 110 MZ 3 B-21892
Straight PZ 1 65 MZ 3 B-21901
PZ 1 85 MZ 3 B-21917
PH 2-SL 5 65 Straight 100 D-65539 PZ 1 110 MZ 3 B-21923
PZ 2 65 MZ 3 B-20719
PZ 2 85 MZ 3 B-12790

Screw bit (Double-end) 10pcs. set / Plastic bag PZ 2 85 MZ 18 B-16259

PZ 2 110 MZ 3 B-21939
PZ 3 65 MZ 3 B-20725
PZ 3 85 MZ 3 B-20731
With magnet
1/4''Hex (MZ) PZ 3 110 MZ 3 B-21945
Length SQ 1 2-1/2’’ (65mm) MZ 3 B-20884
Size Shank Type Per pkg. Part No.
(mm)
SQ 1 3-3/8’’ (85mm) MZ 3 B-20890
PH 1 65 MZ 10 D-65523
SQ 1 4-3/8’’ (110mm) MZ 3 B-20909
PH 2 65 MZ 10 D-65078 SQ 2 2-1/2’’ (65mm) MZ 3 B-20915
SQ 2 3-3/8’’ (85mm) MZ 3 B-20921
Straight
SQ 2 4-3/8’’ (110mm) MZ 3 B-20937
SQ 3 2-1/2’’ (65mm) MZ 3 B-20943
PH 2-SL 5 65 Straight 10 D-65545
SQ 3 3-3/8’’ (85mm) MZ 3 B-20959
SQ 3 4-3/8’’ (110mm) MZ 3 B-20965
* Japanese Package
Screw bit (Double-end)
1/4''Hex (NZ)
1/4''Hex (NZ)
Length PH 1 (Slim) 65 NZ 3 A-52881 *
Size Shank Type Per pkg. Part No.
(mm)
PH 1 (Slim) 110 NZ 3 A-52897 *
PH 2 45 NZ 3 798308-1
PH 2 65 NZ 3 A-49563 *
PH 2 45 NZ 1 784229-3
PH 2 65 NZ 6 A-49579 *
PH 2 65 NZ 3 798309-9 PH 2 85 NZ 3 A-49585 *
PH 2 65 NZ 1 784203-1 PH 2 110 NZ 3 A-49600 *
PH 2 65 NZ 1 784230-8 PH 2 150 NZ 3 A-50120 *
PH 2 110 NZ 3 798337-4 PH2 (Slim) 65 NZ 3 A-50924 *
PH 2 110 NZ 1 784206-5 PH2 (Slim) 85 NZ 3 A-50952 *
PH 2 150 NZ 3 798338-2 PH2 (Slim) 110 NZ 3 A-50980 *
PH 2 250 NZ 1 784221-9 PH 3 65 NZ 3 A-52906 *
PH 3 45 NZ 3 798310-4 PH 3 110 NZ 3 A-52912 *
PH 3 65 NZ 3 798311-2
PH 3 110 NZ 3 798339-0

PH2 - SL0.8 45 NZ 1 784614-0

Torsion screw bit (Double-end) / Blister pack Ultra mag attacher & Neck torsion bit (Double-end) /
Able to use both sides of the bit.
It works as much as 2 regular bits.
Blister pack
With Ultra mag attacher on the bits, extra strong magnet holds even long screws
securely for accurate driving.

With magnet
With magnet

1/4''Hex (MZ)
Length
Size Shank Type Per pkg. Part No. Absorbs the small vibration which occurred from the start of screwing
(mm)
PH1 65 MZ 3 B-45129
PH1 90 MZ 1 B-45157
PH1 150 MZ 1 B-45185
PH2 65 MZ 3 B-45135
1/4''Hex (NZ)
PH2 90 MZ 1 B-45163
Size Length (mm) Shank Type Per pkg. Part No.
PH2 150 MZ 1 B-45191
PH3 65 MZ 3 B-45141 PH 2 65 NZ 1 B-30483

PH3 90 MZ 1 B-45179
PH3 150 MZ 1 B-45200
Twist torsion screw bit (Double-end) / Blister pack
PZ1 65 MZ 3 B-45216
PZ1 90 MZ 1 B-45244
PZ1 150 MZ 1 B-45272
With magnet
PZ2 65 MZ 3 B-45222
PZ2 90 MZ 1 B-45250 * Japanese Packege
1/4''Hex (NZ)
PZ2 150 MZ 1 B-45288
Length
Size Shank Type Per pkg. Part No.
PZ3 65 MZ 3 B-45238 (mm)
PZ3 90 MZ 1 B-45266 PH2 65 NZ 3 A-67505*

PZ3 150 MZ 1 B-45294 PH2(Slim) 65 NZ 3 A-67511*

T20 65 MZ 3 B-52489 PH2 90 NZ 3 A-59570*

T25 65 MZ 3 B-52495 PH2 (Slim) 90 NZ 3 A-59601*
T30 65 MZ 3 B-52504 PH2 120 NZ 3 A-59586*

SQ1 65 MZ 3 B-55201 PH2 (Slim) 120 NZ 3 A-59617*

SQ2 65 MZ 3 B-55217 PH2 150 NZ 3 A-59592*

SQ3 65 MZ 3 B-55223 PH2 (Slim) 150 NZ 3 A-59623*

PH2-PZ2
Assort T20-T25 65 MZ 3 B-52510
T30-PH2 Twist torsion screw bit (Double-end) 10pcs. set /
Magnet bottle
Torsion screw bit (Double-end) 10pcs. set / Magnet
bottle with counter display
With magnet

With magnet
B-XXXXX-6 contains 6 sets of B-XXXXX with Counter display
1/4''Hex (NZ)
Length
Size Shank Type Per pkg. Part No.
(mm)

B-XXXXX-6 contains 6 sets of B-XXXXX with Counter display PH2(Slim) 65 NZ 10 B-63127

1/4''Hex (MZ)
Length
Size Shank Type Per pkg. Part No.
(mm)
PH2 65 MZ 10 B-52912-6

PZ2 65 MZ 10 B-52928-6

T20,T25,T30 65 MZ 10 B-54112-6
 Screw guide bit holder / Blister pack
4. Bit holder It can prevent the screw from tilting and the screw be driven in vertical direction.

Magnetic bit holder for screwdriver

With magnet
1/4''Hex (MZ) With magnet

Length (mm) Shank Type Per pkg. Part No.

60 MZ 1 784811-8
1/4''Hex (MZ)
76 MZ 1 784801-1
Length (mm) Shank Type Per pkg. Part No.
80 MZ 1 B-66818
Magnetic bit holder / Blister pack
C-ring spring is installed only for North America specification (B-52451).
Screw guide bit holder (Clear type) / Blister pack
It can prevent the screw from tilting and the screw be driven in vertical direction.
You can see the screw while driving in it.
With magnet
1/4''Hex (MZ)
Length (mm) Shank Type Part No. Note
With magnet
60 MZ B-52445 -
60 MZ B-52451 with C-ring
150 MZ B-57750 with C-ring
300 MZ B-57766 with C-ring
1/4''Hex (MZ)
Length (mm) Shank Type Per pkg. Part No.
Magnetic bit holder / Blister pack 120 MZ 1 B-52934

26pcs.Screw guide bit holder set / Clamshell

It can prevent the screw from tilting and the screw be driven in an vertical direction.
With magnet Flip top case screw bit set
1/4''Hex (MZ)
Length (mm) Shank Type Part No. Note
60 MZ B-66793 -

Sleeve chuck bit holder / Blister pack

1/4''Hex (MZ)
With magnet Bit Bit holder Length (mm) Part No.
1/4''Hex (MZ)
5xPH2 x 25mm
Length Shank Type Part No.
60mm MZ B-52467 5xPZ2 x 25mm 80 B-48773
5xT20, 5xT25, 5xT30 x
25mm
Sleeve chuck bit holder / Blister pack
5xPH2 x 25mm

5xPZ2 x 25mm 120 B-48789

5xT20, 5xT25, 5xT30 x
25mm
With magnet 5xPH1, 5xPh2, 5xPh3 x
1/4''Hex (MZ)
25mm
80 B-49890
Length (mm) Shank Type Part No.
5xSL5, 5xSL6 x 25mm
60 MZ B-66802
5xPH1, 5xPh2, 5xPh3 x
25mm
120 B-49909
Screw guide bit holder / Blister pack 5xSL5, 5xSL6 x 25mm
It can prevent the screw from tilting and the screw be driven in vertical direction.

Torsion bit holder / Blister pack

1/4''Hex (MZ)
With magnet

With magnet

1/4''Hex (MZ)
1/4''Hex (MZ)
Length (mm) Shank Type Per pkg. Part No.
Length (mm) Shank Type Per pkg. Part No.
80 MZ 1 B-48751
66 MZ 1 B-28525
120 MZ 1 B-48767
Ultra mag torsion bit holder / Blister pack Magnet nutsetter (E-form) / Candy jar
1/4''Hex (MZ)

With magnet
With strong magnet 1/4''Hex (MZ)
A (mm) Length (mm) Shank Type Per pkg. Part No.
1/4''Hex (MZ)
8 50 MZ 50 B-67773
Length (mm) Shank Type Per pkg. Part No.
10 50 MZ 30 B-67789
79 MZ 1 B-28531 1/4''Hex (NZ)
A (mm) Length (mm) Shank Type Per pkg. Part No.

Flexible bit holder / Blister pack 8 50 NZ 50 B-68345

Flexible extension for driving into hard to access corners.

Magnet nutsetter (E-form),imperial / Blister pack

Total length: 1-7/8'' (50mm)
With magnet
Overall length Part No.
200mm B-29088 Size: inch
1/4''Hex (MZ)
300 mm B-29103
A (Inch) Length (Inch) Shank Type Per pkg. Part No.
1/4'' 1-7/8'' MZ 1 B-38794
Flexible tough bit holder / Blister pack 5/16'' 1-7/8'' MZ 1 B-38803
It is able to use with Impact Driver.
Flexible extension for driving into hard to access corners. 3/8'' 1-7/8'' MZ 1 B-38819
7/16'' 1-7/8'' MZ 1 B-38825
1/4''Hex 1/2'' 1-7/8'' MZ 1 B-38831
Overall length Shank Type Part No.
300mm NZ B-51851
Magnet nutsetter (E-form) 3pcs.assortment,imperial /
300mm MZ B-51867
Blister pack

5.Nutsetter
Magnet nutsetter(E-from) / Blister pack
Size: inch
1/4''Hex (MZ)
A (Inch) Length (Inch) Shank Type Per pkg. Part No.
With magnet
1/4'' , 5/16'' ,
1-7/8'' MZ 1pc each B-38847
3/8''
1/4''Hex (MZ or NZ)
Size A Length (mm) Shank Type Per pkg. Part No.
Magnet nutsetter (E-form) 4pcs.assortment,imperial /
M3 5.5mm 50 MZ 1 B-38906
M3.5 6mm 50 MZ or NZ 1 B-38912 Blister pack
M4 7mm 50 MZ or NZ 1 B-38928
M5 8mm 50 MZ or NZ 1 B-38934
M6 10mm 50 MZ or NZ 1 B-38940
M7 11mm 50 MZ 1 B-61999 Size: inch
1/4''Hex (MZ)
M8 12mm 50 MZ or NZ 1 B-38956 Length
A (Inch) Shank Type Per pkg. Part No.
M8 13mm 50 MZ or NZ 1 B-38962 (Inch)
M10 17mm 50 MZ 1 B-38978 1/4'' ,5/16'' ,3/8'' ,7/16'' 1-7/8'' MZ 1pc each B-38853
1/8'' 1/4'' 50 MZ 1 B-38984
3/16'' 5/16'' 50 MZ 1 B-38990
Magnet nutsetter (E-form), imperial / Blister pack
1/4'' 3/8'' 50 MZ 1 B-39001
Total length: 2-9/16'' (65mm)

Magnet nutsetter (E-form) 5pcs.assortment / Blister

With magnet
pack

Size: inch
With magnet 1/4''Hex (MZ)
A (Inch) Length (Inch) Shank Type Per pkg. Part No.

1/4'' 2-9/16'' MZ 1 B-45076

1/4''Hex (MZ or NZ)
A (mm) Length (mm) Shank Type Per pkg. Part No. 5/16'' 2-9/16'' MZ 1 B-45082

6,8,10,12,13 50 MZ or NZ 1pc each B-39176 3/8'' 2-9/16'' MZ 1 B-45098

7/16'' 2-9/16'' MZ 1 B-45107

Magnet nutsetter (E-form) / Candy jar Detachable nutsetter / Blister pack
Socket and Shank is detachable.
1. Easy to clean the debris.
2. Able to select Socket and Shank material
With magnet  and hardness separately and realize
1/4''Hex (MZ) high durability (20 times).

A (Inch) Length (Inch) Shank Type Per pkg. Part No.

1/4" 2-9/16'' MZ 50 E-01856
With magnet
5/16'' 2-9/16'' MZ 50 E-01862
3/8'' 2-9/16'' MZ 30 E-01878

Magnet nutsetter(C-form) 4pcs.assortment / Blister

pack

With magnet
* Shank 1pc. + Socket 1pc.
A (mm) Length (mm) Shank Type Per pkg. Part No. * *Shank 1pc. + Socket 3pcs.
8,10,12,13 48 C-form 1pc each B-57554 1/4''Hex (MZ)
Size Length Shank Type Per pkg. Part No.
8mm(5/16’’) 61mm MZ 1* B-40266
Magnet nutsetter(C-form) 4pcs.assortment,imperial /
8mm(5/16’’) 61mm MZ 3** B-40353
Blister pack 3/8’’(9.6mm) 61mm MZ 1* B-40272
3/8’’(9.6mm) 61mm MZ 3** B-40369
10mm 61mm MZ 1* B-40288
With magnet 10mm 61mm MZ 3** B-40375
Length 8, 9.6, 10mm 61mm MZ 3** B-40381
A (Inch) Shank Type Per pkg. Part No.
(Inch)
5/16",3/8" ,7/16",1/2" 1-7/8'' C-form 1pc each B-59265

6.Bit set
Magnet nutsetter(E-from) / Blister pack
1/4''Hex
10pcs. Screw bit set / Clamshell
PH1,PH2 x 50mm, PZ1,PZ2 x 50mm

SL4.0,SL5.5 x 50mm T20, T25, T30 x 50mm

With magnet Magnetic bit holder

1/4''Hex (MZ)
A Shank Type Part No.
Size Length (mm) Shank Type Per pkg. Part No.
(mm)
MZ D-65028
M3.5 6 50 MZ 1 B-66824
NZ D-67620
M5 8 50 MZ 1 B-66830
M6 10 50 MZ 1 B-66846
M8 13 50 MZ 1 B-66852 11pcs. Screw bit set / Counter display
(D-XXXXX-12 contains 12 sets of D-XXXXX in counter display)
PH1,PH2,PH3 x 25mm, PZ1,PZ2,PZ3 x 25mm
Ring nutsetter / Blister pack
The spring-loaded clip retains the fastener, eliminating all build up of swarf on the T15, T20, T25, T30 x 25mm
magnet which prevents correct fastener connection. Magnetic bit holder MZ
Shank Type Part No.
MZ D-30651-12

PH1,PH2,PH3 x 25mm , SL 3/16'', SL 1/4'' x 25mm

T15, T20 x 25mm, SQ1,SQ2,SQ3 x 25mm

Magnetic bit holder MZ
Shank Type Part No.
MZ D-31625-12

11pcs. Screw bit set / Clamshell

1/4''Hex (MZ) PH2 x 25mm, PZ1,PZ2,PZ3 x 25mm
Size Length (mm) Shank Type Per pkg. Part No. T10, T15, T20, T25, T30, T40 x 25mm
8mm(5/16’’) 50 MZ 1 B-28569
Magnetic bit holder MZ
3/8’’(9.6mm) 50 MZ 1 B-28575
Shank Type Part No.
10mm 50 MZ 1 B-28581
1/4''Hex (NZ) MZ D-31756

8mm(5/16’’) 50 NZ 1 B-30455
11pcs. screw bit set / Clamshell PH1, 2xPH2, PH3 x 25mm, PH1, PH2, PH3 x 50mm, SL4, SL5, SL6 x 50mm

PH1,PH2,PH3 x 25mm, PZ1,PZ2,PZ3 x 25mm T10, T15, T20, T25 x 25mm, H4, H5, H6 x 50mm

T15, T20, T25, T30 x 25mm Sleevechuck bit holder NZ

Magnetic bit holder
Shank Type Part No.
Shank Type Part No.
NZ B-45397-6
MZ D-64995
NZ D-67636

PH2 x 25mm, PZ1,PZ2,PZ3 x 25mm 28pcs. Screw bit / Counter display

T20,T25,T30,T40 x 25mm, H4.5 x 25mm (B-XXXXX-6 contains 6 sets of B-XXXXX with hanger display)
Magnetic bit holder MZ (B-XXXXX-12 contains 12 sets of B-XXXXX in counter display)
Shank Type Part No.
PH0, PH1, 3xPH2, PH3 x 25mm, PZ0, PZ1, 2xPZ2, PZ3 x 25mm,
MZ D-65006
SL4, SL5, SL6 x 25mm, T10, T15, T20, T25, T27, T30, T40 x 25mm,

H2, H2.5, H3, H4, H5, H6 x 25mm, Magnetic bit holder MZ

12pcs. Screw bit set / Counter display
Shank Type Part No.
(B/D-XXXXX-12 contains 12 sets of B/D-XXXXX in
MZ B-28911-6
counter display)
PH1,PH2,PH3 x 25mm, PZ1,PZ2,PZ3 x 25mm 15xPH2, 3xPH3 x 25mm, SL4, SL5, SL6 x 25mm

T10, T15, T20, T25, T30 x 25mm T10, T15, T20, T25, T30, T40 x 25mm, Magnetic bit holder MZ

Magnetic bit holder MZ Shank Type Part No.

Shank Type Part No. MZ B-40347-12
MZ D-31083-12 PH0, PH1, 3xPH2, PH3 x 25mm, PZ0, PZ1, 2xPZ2, PZ3 x 25mm
PH1,PH2,PH3 x 25mm, SL 3/16'', SL 1/4'' x 25mm
SL4, SL5, SL6 x 25mm, T10, T15, T20, T25, T27, T30, T40 x 25mm
T15, T20, T25 x 25mm, SQ1,SQ2,SQ3 x 25mm, Magnetic bit holder MZ
T10, T15, T20, T25, T27, T30, T40 x 25mm, H2, H2.5, H3, H4, H5, H6 x 25mm
Shank Type Part No.
Magnetic bit holder NZ
MZ D-31619-12
Shank Type Part No.
PH1,PH2,PH3 x 25mm, PZ1,PZ2,PZ3 x 25mm
NZ B-45412-6
T10, T15, T20, T25, T30 x 25mm, Magnetic bit holder NZ

Shank Type Part No.

31pcs. Screw bit set / Counter display
NZ D-31011-12
(D-XXXXX-12 contains 12 sets of D-XXXXX in counter display)
PH1,PH2,PH3 x 25mm, T10, T15, T20, T25, T30 x 25mm
2xPH1, 4xPH2, PH3 x 25mm, 2xPZ1, 5xPZ2, PZ3 x 25mm
H4, H5, H6 x 25mm, Magnetic bit holder NZ
SL4.0, SL5.5, SL6.5 x 25mm, 2xT10, 2xT15, 2xT20, 3xT25, 2xT30, T40 x 25mm
Shank Type Part No.
Sleeve chuck bit holder MZ
NZ B-45381-12

18pcs. Screw bit set / Counter display

Shank Type Part No.
(B-XXXXX-6 contains 6 sets of B-XXXXX with hanger display)
MZ D-30667-12
(B-XXXXX-12 contains 12 sets of B-XXXXX in counter display)

PH1, 2xPH2, PH3 x 25mm, PH1, PH2, PH3 x 50mm

PZ1, 2xPZ2, PZ3 x 25mm, PZ1, PZ2, PZ3 x 50mm

31pcs. Screw bit set / Counter display
(B/D-XXXXX-12 contains 12 sets of B/D-XXXXX in counter display)
SL4, SL5, SL6 x 50mm
PH1, 2xPH2, PH3 x 25mm, PZ1, 2xPZ2, PZ3 x 25mm
Sleeve chuck bit holder MZ
3xT10, 3xT15, 4xT20, 4xT25, 3xT30, 2xT40 x 25mm, H4, H5, H6 x 25mm
Shank Type Part No.
MZ B-28896-6 Magnetic bit holder MZ

PH1, 2xPH2, PH3 x 25mm, PH1, 2xPH2, PH3 x 50mm Shank Type Part No.
MZ D-34936-12
SQ1, 2xSQ2, SQ3 x 25mm, SQ1, 3xSQ2, SQ3 x 50mm
Sleeve chuck bit holder MZ
Shank Type Part No. PH1, 2xPH2, PH3 x 25mm, SL4, 2xSL5, SL6 x 25mm
MZ B-40571-6
3xT10, 3xT15, 4xT20, 4xT25, 3xT30, 2xT40 x 25mm, H4, H5, H6 x 25mm
8xPH2 x 25mm, 3xPH2 x 50mm, PZ1, PZ2, PZ3 x 50mm
Magnetic bit holder NZ
SL4, SL5, SL6 x 50mm
Shank Type Part No.
Sleevechuck bit holder MZ
NZ B-45406-12
Shank Type Part No.
MZ B-43000-12
32pcs. Screw bit set / Shrink rap
PH0, 2xPH1,4xPH2, 2xPH3 x 25mm, 2xPZ1, 3xPZ2, PZ3 x 25mm 43pcs. Color screw bit set / Clamshell
SL4.0,SL6.0 x 25mm, T10,T15, 2xT20, 2xT25, T27, T30, T40 x 25mm PH1, 2xPH2, PH3 x 25mm, PZ1, 2xPZ2, PZ3 x 25mm
H3,H4,H5,H6 x 25mm, Sleeve chuck bit holder MZ, SQ1/2''
SL3.0,SL4.0,SL4.5,SL5.5 x 25mm, T10,2xT15,2xT20,T25,T27,T30,T40 x 25mm
Shank Type Part No.
T10H,T15H,T20H,T25H,T27H,T30H,T40H x 25mm, H3,H4,H5,H6
MZ D-65084
PH2 x 75mm, PZ2 x 75mm,
NZ D-67642
SL4.5 x 75mm

Magnetic Nutsetter 6,8,10mm,

21pcs. Screw bit set / Clamshell
Sleeve chuck bit holder 60mm
PH1,2xPH2,,PH3 x 50mm, PZ1, 2xPZ2, PZ3 x 50mm, SL5.5,SL6.5 x50mm ,

T10,T15, T20, 2xT25,2x T30, x 50mm, H3,H4,H5,H6 x 50mm Screw guide bit holder 80mm

Shank Type Part No.

Shank Type Part No. MZ/NZ B-55697

MZ B-68323

Tough case / Shrink rap

31pcs. Screw bit set / Clamshell
Size Part No.
PH0, PH1,4xPH2,,PH3 x 25mm, PZ0, PZ1, 4xPZ2, PZ3 x 25mm
Small B-62066
SL4.5,SL5.5, SL6.5 x 25mm , T10,T15, 2xT20, 2xT25, T27 ,T30, T40 x 25mm,
Middle B-62072
H3,H4,H5,H6 x 25mm, Skeeve chuck bit holder Large B-62088
Shank Type Part No.
MZ B-68317
Battery type case / Shrink rap
NZ B-69901 *with 21pcs. inner module

31pcs. Screw bit set / Shrink rap with counter display

Part No.
(E-00022 contains 12 sets of E-00016 in counter display)
B-69917
PH0, PH1,4xPH2,,PH3 x 25mm, PZ0, PZ1, 4xPZ2, PZ3 x 25mm
*E-00315
SL4.5,SL5.5, SL6.5 x 25mm , T10,T15, 2xT20, 2xT25, T27 ,T30, T40 x 25mm,

H3,H4,H5,H6 x 25mm, Skeeve chuck bit holder

Shank Type Part No. 33pcs. Screw bit & Drill bit set / Clamshell
MZ E-00022 PH1, 3xPH2,PH3 x 25mm, PH2 x 50mm

PZ1,3xPZ2,PZ3 x 25mm, PZ2 x 50mm

T15, 2xT20, 2xT25, T30 x 25mm, T15,T20,T25,T30 x 50mm

37pcs. Screw bit set / Clamshell with counter display
(B-XXXXX-10 contains 10 sets of B-XXXXX in counter display) 1/4''Hex Shank drill

PH0, PH1, 2xPH2, PH3 x 25mm, PZ0, PZ1, 2xPZ2, PZ3 x 25mm Magnet nutsetter:6,8,10mm

SL0.5x4.0, SL0.6x4.5, SL1.0x5.5, SL1.2x6.5 x 25mm Magnetic bit holder 60mm

T10, 2xT15, 2xT20, 2xT25, T27, 2xT30, T40 x 25mm Screw guide bit holder 80mm
T10H, T15H, T20H, T25H, T27H, T30H, T40H x 25mm
H3, H4, H5, H6 x 25mm, Magnetic bit holder MZ
Shank Type Part No.

MZ B-66896

Shank Type Part No.

MZ B-28606-10
35pcs. Screw bit set / Clamshell
PH1, 3xPH2,PH3 x 25mm, PH1, 2xPH2 ,PH3 x 50mm

PZ1,3xPZ2,PZ3 x 25mm , PZ1, 2xPZ2 ,PZ3 x 50mm

21pcs. Screw bit & Socket set with Rachet handle /
T15, 2xT20, 2xT25, T30 x 25mm, T15,T20,2xT25,T30 x 50mm
Clamshell
SL5.5 x 50mm
PH1, PH2, PH3 x 25mm, PZ1, PZ2 x 25mm, SL0.8x5.5,SL1.2x6.5 x 25mm,
Magnet nutsetter:6,8,10,13mm
T20,T25,T30 x 25mm, H4, H6 x 25mm, Socket,H5,H6,H8,H10,H12,H13 Magnetic bit holder 60mm

Magnetic bit holder MZ, Rachet handle 1/4"

Shank Type Part No. Shank Type Part No.

MZ/NZ B-54081 MZ B-66880
11pcs. Torsion screw bit set / Blister pack
7. Socket adapter / Socket bit
Socket adapter / Blister pack
PH1,PH2,PH3 x 25mm It allows impact driver to fasten or loosen bolt and nut.

PZ1,PZ2,PZ3 x 25mm

T15, T20, T25, T30 x 25mm

Torsion bit holder 1/4''Hex (MZ)

Size Length (mm) Shank Type Per pkg. Part No.
Shank Type Part No.
SQ 3/8'' 50 MZ 1 B-54667
MZ B-28597
SQ 1/2'' 50 MZ 1 B-54673
PH1,PH2,PH3 x 25mm, PZ1,PZ2,PZ3 x 25mm, T15, T20, T25, T30 x 25mm
1/4''Hex (NZ)
Ultra mag torsion bit holder
SQ 3/8'' 50 NZ 1 B-54689
Shank Type Part No.
SQ 1/2'' 50 NZ 1 B-54695
MZ B-30754 1/4''Hex (MZ) 150mm
PH1,3xPH2,PH3 x 25mm, SQ1,3xSQ2,SQ3 x 25mm Size Length (mm) Shank Type Per pkg. Part No.

Ultra mag torsion bit holder SQ 3/8'' 150 MZ 1 B-57738

SQ 1/2'' 150 MZ 1 B-57744
Shank Type Part No.
MZ B-30760
Socket adapter with 7/16" hex shank / Blister pack
26pcs. Torsion screw bit set / Clamshell
PH1,2xPH2,PH3 x 25mm, PH2 x 50mm

PZ1,2xPZ2,PZ3 x 25mm, PZ2 x 50mm

SQ1,2xSQ2,SQ3 x 25mm, SQ2 x 50mm Size Length (mm) Shank Type Per pkg. Part No.

T10, T15, 2xT20, 2xT25, 2xT30 x 25mm, T25 x 50mm SQ 3/8'' 75 7/16" Hex 1 B-59835
Ultra mag torsion bit holder SQ 1/2'' 75 7/16" Hex 1 B-59841
Mag boost

Socket adapter / Blister pack

It allows impact driver to fasten or loosen bolt and nut.
Shank Type Part No.
MZ B-49915

26pcs. Torsion screw bit set / Clamshell

1/4''Hex (MZ)
Size Length (mm) Shank Type Per pkg. Part No.

PH1,2xPH2,PH3 x 25mm, PH2-PH2 x 65mm SQ 3/8'' 50 MZ 1 B-66868

PZ1,2xPZ2,PZ3 x 25mm, PZ2-PZ2 x 65mm SQ 1/2'' 50 MZ 1 B-66874

SQ1,2xSQ2,SQ3 x 25mm, SQ2 x 50mm

T10, T15, 2xT20, 2xT25, 2xT30 x 25mm 9pcs.Socket adapter assortment / Blister pack
Detachable Nutsetter, Torsion bit holder, Mag boost

Shank Type Part No. It allows impact driver to fasten or loosen bolt and nut.
MZ B-49921 8,10,12,13,14,15,17,18mm
Socket adapter 50mm

38pcs. Torsion screw bit set / Clamshell

PH1,3xPH2,PH3 x 25mm, PH2-PH2 x 65mm 1/4''Hex (MZ)

PZ1,3xPZ2,PZ3 x 25mm Size Shank Type Per pkg. Part No.

SQ 3/8'' MZ 9 B-54651
SQ1,3xSQ2,SQ3 x 25mm
SQ 1/2'' MZ 9 B-54645
T10, T15, 3xT20, 3xT25, 3xT30 x 25mm
1/4''Hex (NZ)
Assort, PZ2-T20,PZ-T25,PZ2-T30,PH2-SQ2 x 65mm
SQ 3/8'' NZ 9 B-55778
Detachable nutsetter, Torsion bit holder, 1/4" Socket adapter, Mag boost SQ 1/2'' NZ 9 B-55762
Shank Type Part No.
MZ B-54536
7pcs.Socket adapter assortment / Clamshell
8. Impact socket
Impact socket / Hanger hook
It allows impact driver to fasten or loosen bolt and nut.
13,17,19,21,22,24mm
Socket adapter 50mm

For impact wrenches with 3/8'' square drive.

A(mm) L(mm) Part No. A(mm) L(mm) Part No.
6 28 B-39883 15 28 B-39970
7 28 B-39899 16 28 B-39986
8 28 B-39908 17 30 B-39992
1/4''Hex (MZ) 9 28 B-39914 18 30 B-40004
Size Shank Type Per pkg. Part No. 10 28 B-39920 19 30 B-40010

SQ 1/2'' MZ 1 B-69733 11 28 B-39936 20 30 B-40026

12 28 B-39942 21 30 B-40032
13 28 B-39958 22 30 B-40048
Tilt socket adapter / Blister pack 14 28 B-39964   
The socket can tilt up to 15°angle
to assist fastening in confined applications.

*3pcs / set
For impact wrenches with 1/2'' square drive.
Impact
1/4''Hex (MZ) Pin O-ring
A(mm) L(mm) socket
Size Length (mm) Shank Type Per pkg. Part No. Part No. Part No. Part No. Part No. Part No.
SQ 3/8'' 56 MZ 1 B-28547 8 38 B-40054 *B-54586 268056-1 *B-54542 213396-2
SQ 1/2'' 56 MZ 1 B-28553 9 38 B-40060 *B-54586 268056-1 *B-54542 213396-2
10 38 B-40076 *B-54586 268056-1 *B-54542 213396-2
11 38 B-40082 *B-54586 268056-1 *B-54542 213396-2
Semi long socket bit / Hanger hook 12 38 B-40098 *B-54586 268056-1 *B-54542 213396-2
Able to screw the nut on the long protruded bolt as the sockets inside is hollow and
able to reach the nut without interference 13 38 B-40107 *B-54586 268056-1 *B-54542 213396-2
of the bolt. 14 38 B-40113 *B-54586 268056-1 *B-54542 213396-2
15 38 B-40129 *B-54586 268056-1 *B-54542 213396-2
16 38 B-40135 *B-54586 268056-1 *B-54542 213396-2
17 38 B-40141 *B-54586 268056-1 *B-54558 213370-0
18 38 B-40157 *B-54601 268057-9 *B-54564 213398-8
1/4''Hex (NZ) 19 38 B-40163 *B-54601 268057-9 *B-54564 213398-8
A (mm) D (mm) L (mm) Shank Type Per pkg. Part No. 20 38 B-40179 *B-54617 268057-9 *B-54570 213399-6
8 50 90 NZ 1 A-58914 21 38 B-40185 *B-54617 268057-9 *B-54570 213399-6
22 38 B-40191 *B-54617 268057-9 *B-54570 213399-6
10 50 90 NZ 1 A-58920
23 38 B-40200 *B-54617 268057-9 *B-54570 213399-6
12 50 90 NZ 1 A-58936
24 38 B-40216 *B-54617 268057-9 *B-54570 213399-6
13 50 90 NZ 1 A-58942 27 42 B-40222 *B-54617 268057-9 *B-54570 213399-6
14 50 90 NZ 1 A-58958 30 44 B-40238 *B-54617 268057-9 *B-54570 213399-6

17 50 90 NZ 1 A-58964 32 44 B-40244 *B-54617 268057-9 *B-54570 213399-6

19 50 90 NZ 1 A-58970

21 50 90 NZ 1 A-58986
Impact socket /Bulk
24 50 90 NZ 1 A-58992

*3pcs / set
For impact wrenches with 1/2'' square drive.
Impact
Pin O-ring
A(mm) L(mm) socket
Part No. Part No. Part No. Part No. Part No.
10 38 B-10497 *B-54586 268056-1 *B-54542 213396-2
12 38 A-89931 *B-54586 268056-1 *B-54542 213396-2
13 38 134825-1 *B-54586 268056-1 *B-54542 213396-2
14 38 134826-9 *B-54586 268056-1 *B-54542 213396-2
 Impact
Pin O-ring
A(mm) L(mm) socket
Part No. Part No. Part No. Part No. Part No.
For impact wrenches with 25mm (1'') square drive.
16 38 B-10506 *B-54586 268056-1 *B-54542 213396-2 Impact socket Pin O-ring
17 38 134829-3 *B-54592 268056-1 *B-54558 213397-0 A(mm) L(mm)
Part No. Part No. Part No.
19 38 134831-6 *B-54601 268057-9 *B-54564 213398-8
35 80 134864-1 256284-0 213570-2
21 38 134838-2 *B-54617 268057-9 *B-54570 213399-6
36 80 134865-9 256284-0 213570-2
22 38 134851-0 *B-54617 268057-9 *B-54570 213399-6
41 80 134872-2 256284-0 213570-2
23 38 134840-5 *B-54617 268057-9 *B-54570 213399-6
24 45 134841-3 *B-54617 268057-9 *B-54570 213399-6
26 50 134842-1 *B-54617 268057-9 *B-54570 213399-6 Impact socket (Deep type) / Hanger hook
27 50 134844-7 *B-54617 268057-9 *B-54570 213399-6
30 50 134846-3 *B-54617 268057-9 *B-54570 213399-6
32 50 134848-9 *B-54617 268057-9 *B-54570 213399-6 *3pcs / set
For impact wrenches with 3/8' square drive.
13 52 134827-7 *B-54586 268056-1 *B-54542 213397-0
A(mm) L(mm) Part No. A(mm) L(mm) Part No.
14 52 134828-5 *B-54586 268056-1 *B-54542 213397-0
17 52 134830-8 *B-54592 268056-1 *B-54558 213397-0 7 63 B-55398 15 63 B-52227

19 52 134832-4 *B-54601 268057-9 *B-54564 213398-8 8 63 B-55407 16 63 B-52233

21 52 134833-2 *B-54617 268057-9 *B-54570 213398-8 9 63 B-55413 17 63 B-52249

22 52 134834-0 *B-54617 268057-9 *B-54570 213398-8 10 63 B-55429 18 63 B-52255

23 52 134835-8 *B-54617 268057-9 *B-54570 213398-8 11 63 B-55435 19 63 B-52261

24 52 134836-6 B-546017 268057-9 *B-54570 213398-8 12 63 B-55441 20 63 B-52277

Deep type 13 63 B-55457 21 63 B-52283

12 75 134867-5 *B-54586 256095-3 *B-54542 213370-0 14 63 B-55463 22 63 B-52299

19 78 134837-4 *B-54601 268057-9 *B-54564 213399-6

21 78 134839-0 *B-54617 268057-9 *B-54570 213399-6
26 78 134843-9 *B-54617 268057-9 *B-54570 213399-6
27 78 134845-5 *B-54617 268057-9 *B-54570 213399-6
30 78 134847-1 *B-54617 268057-9 *B-54570 213399-6 For impact wrenches with 3/8' square drive.
32 78 134849-7 *B-54617 268057-9 *B-54570 213399-6 A(Inch) L(inch) Part No. A(Inch) L(inch) Part No.
1/4'' 2-1/2'' A-99518 5/8'' 2-1/2'' A-99580
5/16'' 2-1/2'' A-99524 11/16'' 2-1/2'' A-99596
11/32'' 2-1/2'' A-99530 3/4'' 2-1/2'' A-99605
For impact wrenches with 19mm (3/4'') square drive. 3/8'' 2-1/2'' A-99546 13/16' 2-1/2'' A-99611
Impact Socket Pin O-ring 7/16'' 2-1/2'' A-99552 7/8'' 2-1/2'' A-99627
A(mm) L(mm)
Part No. Part No. Part No. 1/2'' 2-1/2'' A-99568 15/16'' 2-1/2'' A-99633
9/16'' 2-1/2'' A-99574 1'’ 2-1/2'' A-99649
17 50 A-85494 - -
19 50 A-85519 256283-2 213461-7
21 52 A-85531 256283-2 213461-7 Deep type / Hanger hook
22 52 A-85553 256283-2 213461-7
24 52 A-85575 256283-2 213461-7
26 52 134853-6 213461-7 256283-2 *3pcs / set
27 52 134855-2 213461-7 256283-2 For impact wrenches with 1/2'' square drive.
Impact
30 52 134857-8 213514-2 256282-4 Pin O-ring
A(mm) L(mm) socket
32 52 134871-4 213514-2 256282-4 Part No. Part No. Part No. Part No. Part No.
35 56 134860-9 213514-2 256282-4
8 81.5 B-52146 *B-54586 268056-1 *B-54542 213396-2
36 56 134862-5 213514-2 256282-4
10 81.5 B-52152 *B-54586 268056-1 *B-54542 213396-2
Deep type     11 81.5 B-52168 *B-54586 268056-1 *B-54542 213396-2
17 95 A-85503 - - 12 81.5 B-52174 *B-54586 268056-1 *B-54542 213396-2
19 95 A-85525 256282-4 213514-2 13 81.5 B-52180 *B-54586 268056-1 *B-54542 213396-2
21 95 A-85547 256282-4 213514-2 14 81.5 B-52196 *B-54586 268056-1 *B-54542 213396-2
22 95 A-85569 256282-4 213514-2 16 81.5 B-52205 *B-54586 268056-1 *B-54542 213396-2
24 95 A-85581 256282-4 213514-2 17 81.5 B-52211 *B-54586 268056-1 *B-54558 213370-0
26 95 134854-4 213514-2 256282-4 18 81.5 B-52227 *B-54601 268057-9 *B-54564 213398-8
27 95 134856-0 213514-2 256282-4 19 81.5 B-52233 *B-54601 268057-9 *B-54564 213398-8
30 95 134858-6 213514-2 256282-4 21 81.5 B-52249 *B-54617 268057-9 *B-54570 213399-6
32 95 134859-4 213514-2 256282-4 22 81.5 B-52255 *B-54617 268057-9 *B-54570 213399-6
35 95 134861-7 213514-2 256282-4 24 81.5 B-52261 *B-54617 268057-9 *B-54570 213399-6
36 95 134863-3 213514-2 256282-4 27 81.5 B-52277 *B-54617 268057-9 *B-54570 213399-6
30 81.5 B-52283 *B-54617 268057-9 *B-54570 213399-6
32 81.5 B-52299 *B-54617 268057-9 *B-54570 213399-6
 Socket extension / Hanger hook

For impact wrenches with 1/2'' square drive. 1/2''anvil

A(Inch) L Part No. A(Inch) L(inch) Part No. Impact
Length Pin O-ring
Size Anvil socket
3/8'' 3-3/16'' A-96235 7/8'' 3-3/16'' A-96316 (mm)
Part No. Part No. Part No.
7/16'' 3-3/16'' A-96241 15/16'' 3-3/16'' A-96322
1/2'' 3-3/16'' A-96257 1'' 3-3/16'' A-96338 SQ1/2'' 75 SQ1/2'' B-55706 B-54586 B-54542

9/16'' 3-3/16'' A-96263 1-1/16'' 3-3/16'' A-96344 SQ 1/2'' 150 SQ 1/2'' B-55712 B-54586 B-54542
5/8'' 3-3/16'' A-96279 1-1/8'' 3-3/16'' A-96350 SQ1/2'' 300 SQ1/2'' B-55728 B-54586 B-54542
11/16'' 3-3/16'' A-96285 1-3/16'' 3-3/16'' A-96394
3/4'' 3-3/16'' A-96291 1-1/4'' 3-3/16'' A-96366
13/16'' 3-3/16'' A-96300 Bit adapter / Clamshell

Impact socket (Deep type) / Bulk

1/4''Hex (MZ)
Impact
Pin O-ring Pin O-ring
A(mm) L(mm) Socket
Drive size 
Bit size Part No.
Part No. Part No. Part No. Part No. Part No. Part No. Part No.
12 75 134867-5 *B-54586 256095-3 *B-54542 213370-0 SQ3/8"' 1/4''Hex(MZ) B-68454 - -
19 78 134837-4 *B-54601 268057-9 *B-54564 213399-6 SQ1/2'' 1/4''Hex(MZ) B-68448 B-54586 B-54558
21 78 134839-0 *B-54617 268057-9 *B-54570 213399-6 1/4''Hex (NZ)
26 78 134843-9 *B-54617 268057-9 *B-54570 213399-6 SQ3/8"' 1/4''Hex(NZ) B-68482 - -
27 78 134845-5 *B-54617 268057-9 *B-54570 213399-6 SQ1/2'' 1/4''Hex(NZ) B-68476  B-54586 B-54558
30 78 134847-1 *B-54617 268057-9 *B-54570 213399-6
32 78 134849-7 *B-54617 268057-9 *B-54570 213399-6
Extension bar / Bulk
(With pin and O ring)

9pcs. Impact socket set / Shrink rap

Model No. Drive Size L (mm) Part No.

(With pin and O ring) DTW1002, DTW450, DTW285,
DC
8,10,13,16,17,18,19,21,24mm DTW284, DTW250, DTW190,
SQ1/2'' 100 134874-8
Part No. 6953, 6904VH, 6905B,
AC
6905H, TW0200, TW0350
D-41517
8,10,12,13,14,16,17,19,21mm DC DTW1001
SQ3/4'' 150 134869-1
Part No. AC 6906
B-66232
AC TW1000 SQ1'' 200 134870-6

9pcs. Impact socket set / Clamshell

Universal joint / Bulk
(With pin and O ring)
For use in tight areas where the tool cannot be held in line with bolt or nut
(With pin and O ring)
10,11,13,17,19,21,22, 24, 27 mm

Part No.
Model No. Drive size L (mm) Part No.
B-69749 DTW1002, DTW450, DTW285,
DC
DTW284, DTW250, DTW190,
SQ1/2'' 84 134877-2
6953, 6904VH, 6905B,
AC
14pcs. Impact socket (Deep type) set / Paper sleeve 6905H, TW0200, TW0350
DC DTW1001
SQ3/4'' 105.5 134876-4
AC 6906

*With pin and O ring

Bit adapter assembly / Bulk
(With pin and O ring)
Drive Size Part No.
7/16'',1/2'',9/16'',5/8'',11/16'',3/4'',13/16''
1/2'' Drive A-96372
7/8'',15/16'',1'',1-1/16'',1-1/8'',1- 3/16'',1-1/4''
10,11,12,13,14,16,
1/2'' Drive *B-52308 Model No. Drive size Bit size Part No.
17,19,21,22,24,27,30,32mm
1/4'',5/16'',11/32'',3/8'',7/16'',1/2'',9/16'' DC DTW190,
3/8'' Drive A-99655
5/8'',11/16'',3/4'',13/16'',7/8'',15/16'',1'' SQ1/2'' Hex. 6.35(1/4") 134873-0
8,9,10,11,12,13,14,15,16, AC 6904VH, 6953, TW0200
3/8'' Drive B-55550
17,18,19,21,22mm,
Pin & O-ring for 1/2'' Impact socket / Plastic bag Hollow socket bit / Hanger hook
Able to screw nut to the middle of the threaded rod. Hollow inside makes the bit
lighter.

3pcs set
Pin O-ring
For socket size
Part No. Part No.
8-16mm B-54586 B-54542
17mm B-54592 B-54558
18,19mm B-54601 B-54564
20-32mm B-54617 B-54570
1/4''Hex (MZ)
A (mm) Length (mm) Shank Type Per pkg. Part No.
8.Other 10 75 MZ 1 B-52526
Threaded rod socket bit / Hanger hook 10 150 MZ 1 B-52532
By rotating the threaded rod inserted into the socket bit, the pins inside of the 10 300 MZ 1 B-52548
socket move towards the center of the socket along to the inner surface of the
socket and grip the threaded rod tightly. With that state, able to screw the threaded 10 500 MZ 1 B-52554
rod by rotating the socket bit. 10 700 MZ 1 B-52560
13 75 MZ 1 B-52576
13 150 MZ 1 B-52582
13 300 MZ 1 B-52598
13 500 MZ 1 B-52607
13 700 MZ 1 B-52613
17 75 MZ 1 B-52629
1/4''Hex (MZ) 17 150 MZ 1 B-52635
Size Length (mm) Shank Type Per pkg. Part No. 17 300 MZ 1 B-52641
M6 66 MZ 1 B-42961 17 500 MZ 1 B-52657
M8 66 MZ 1 B-42977 17 700 MZ 1 B-52663
Size:inch
M10 66 MZ 1 B-42983
1/4''Hex (MZ)
3/8'' 66 MZ 1 B-51611 A (Inch) Length (Inch) Shank Type Per pkg. Part No.
1/2'' 66 MZ 1 B-51627
7/16'' 3'' MZ 1 B-50784
7/16'' 6'' MZ 1 B-50790
9pcs.Threaded rod socket bit set / Display 7/16'' 12'' MZ 1 B-50809
Pop with threaded rod (8mm) 7/16'' 18'' MZ 1 B-50815
7/16'' 24'' MZ 1 B-50821
9/16'' 3'' MZ 1 B-43290
9/16'' 6'' MZ 1 B-43309
9/16'' 12'' MZ 1 B-43315
9/16'' 18'' MZ 1 B-43321
9/16'' 24'' MZ 1 B-43337
1/4''Hex (MZ)
3/4'' 3'' MZ 1 B-43343
Length
Size Shank Type Per pkg. Part No.
(mm) 3/4'' 6'' MZ 1 B-43359
3 x M6 (B-42961) 3/4'' 12'' MZ 1 B-43365
3 x M8 (B-42977)
66 MZ 9 B-43022 3/4'' 18'' MZ 1 B-43371
2 x M10 (B-42983)
1 x M6,M8,M10 (B-42999) 3/4'' 24'' MZ 1 B-43387
15/16'' 3'' MZ 1 B-50837
Mag boost / Blister pack 15/16'' 6'' MZ 1 B-50843
15/16'' 12'' MZ 1 B-50859
15/16'' 18'' MZ 1 B-50865
1/4''Hex (MZ) 15/16'' 24'' MZ 1 B-50871
Size Length Shank Type Part No.

Mag boost ̺ ̺ B-42422

Bit catcher for MZ shank / Paper hook
1 (Mag boost) + 5 (Screw bit 50mm) set

PH2 50mm MZ B-42488

PZ2 50mm MZ B-42472

T25 50mm MZ B-42494

SQ2 50mm MZ B-42519

Assortment
Color Shank Type Part No.
(2 x PH2, 2 x PH2,
50mm MZ B-42503 Makita Blue MZ B-54411
T25)
Bit catcher for NZ shank / Paper hook Earth auger drill bit set (Comes with socket, pin and O-
rings) / Pouch
Color Shank Type Part No.
Makita Blue NZ B-63096
Black NZ B-63105
Bit Dia. (mm) Length (mm) Working length (mm) Part No.

Key adapter for NZ shank / Paper hook 20 600 530 B-54302

25 600 530 B-54318
30 600 530 B-54324
Shank Type Part No.
35 600 530 B-54330
NZ B-63111
40 600 530 B-57576

Earth auger drill bit / Pouch

It can drill into ground.
Socket for earth auger drill bit / Clamshell
It is suitable for building greenhouse

Part No.

B-54380

Pin for Socket (For earth auger drill bit) / plastic bag

Part No.

B-54396

Bit Di(mm) Length (mm) Working length (mm) Part No. O-ring for socket (For earth auger drill bit) / plastic bag
20 600 530 B-54346
25 600 530 B-54352
30 600 530 B-54368
35 600 530 B-54374
Part No.
40 600 530 B-57582

B-54405
ACCESSORIES
Drill and Screw Bit Sets
 86 Accessories
Accessory set Lineup
Contents Size
Metric (Shank type MZ) Metric Inch Metric
Range Series (Shank type (Shank type SDS-PLUS
Screw
Metal Wood Masonry
SDS- Hand Screw bit mainly Screw bit
Pcs. bit PLUS tool NZ) MZ)
PZ & PH mainly SQ & PH
W W W W W
17 B-52059
B-53877
MAKPAC series 56 B-53768

62 B-53908 B-53148

MAKPAC accessory set comes 65 B-69478

with Makpac type 1. It consists 66 B-43050 B-43072 B-51661
of drill bit, screw bit and hand
tools. 69 B-49638
96 B-49725
98 B-53154
Screw Bit Sets
Drill and

116 B-49884
MACCESS series MACCESS series contains high 34 D-36996
quality items of screw bits, drill 71
bits, hand tools, and so on. We
D-37144
are sure that the professional 104 D-37150
users will be satisfied with these
bit sets of MACCESS. 200 D-37203
Circle series Circle series comes with bit and 50 D-42313-6 D-53687
hand tool set. These series are 65
more reasonable than D-42329-6
MACCESS series. 71 D-47189-6 D-53001
100 D-42335-5
103 D-42341-5 D-53017
Square series Square series does not contain 17 D-40216 D-46551 D-53693 D-45836
neither high quality expensive
items nor hand tools, to keep it
30 D-47210-10 D-53702
less expensive. 42 D-58877
77 D-47232-5
100 D-47254-5
201 D-47276-2
Tablet case series This is a slim case set and easy
to carry and it is stylish design.
You can put in and take out the 33 B-49389
bits smoothly and it will
increase your work effort.

Accessory set series Accessory set series is the set 75 B-49373

item with the reasonable price.
This is the item eliminating the B-54520
window on the plastic case of 100
Square series. B-54879
102 B-68432

Range
series
MAKPAC
96 98 116
66 69 200
17 56 62 65 S
MACCES
104
71
34 es
Circle seri
103
100
71
65 201
50 ries
Square se

100
77
30 42 series
17 Tablet case

t series
33 102 Accessory se
75 100

0 50 100 150 200 Pcs.

MAKPAC series MAKPAC 66pcs. Drill & Screw bit set
MAKPAC accessory set comes with Makpac type 1. It consists of drill bit, screw bit HSS-G drill bit x11pcs. Wood drill bit x5pcs,
and hand tools. Flat bit x3pcs. Sleeve chuck bit holder,
Screw bit 25mm x36pcs. Magnetic bit holder,
Screw bit 50mmx10pcs. Socket x5pcs.

metric size Type MZ metric size Type NZ inch size Type MZ

Part No. Part No. Part No.
B-43050 B-43072 B-51661

MAKPAC 69pcs. Drill & Screw bit set

MAKPAC 17pcs. Drill bit & Chisel assortment HSS-G drill bit x5pcs. Wood drill bit x5pcs. Flat bit x3pcs. Masonry drill bit x4pcs.
Sleeve chuck bit holder, Screw bit 25mm x36pcs. Magnetic bit holder,
(SDS-PLUS) Screw bit 50mmx10pcs. Socket x5pcs.
metric size
Drill bit x12pcs. Bull point x2pcs.
Cold chisel x2pcs. Scaling chisel x1pcs
metric size Type MZ
Part No.
B-49638
Working
Bit Dia. (mm) Length (mm) Part No.
length (mm)
MAKPAC 96pcs. Bit & Hand tool set
5, 5.5, 6, 7, 110 42 18pcs. Metal drill box set, 37pcs. Screw bit set x2, Tape measure 3m,
6, 7, 8, 10 160 92 Ratchet screwdriver, Mini screwdriver, Snap-off knife

8, 10 210 140
14 260 175 B-52059
Bull Point 140, 250 metric size Type MZ

Cold Chisel 20x140, 20x250 Part No.

Scaling Chisel 50x400 B-49725

5, 6, 7, 8 110 42
5, 6, 7, 10 160 92 MAKPAC 98pcs. Bit & Hand tool set
8, 10, 12 210 140 18pcs. Metal drill box set, 37pcs. Screw bit set, Socket x5pcs. Drywall bit,
Sleeve chuck bit holder, Ratchet screwdriver, Stubby screwdriver, Snap-off knife
14 260 175 B-53877 Tape measure 3m
Bull Point 140, 250
Cold Chisel 20 x 140, 20 x 250
Scaling Chisel 40x250 metric size Type MZ
Part No.
MAKPAC 56pcs. Set for impact driver B-53154
HSS-TiN impact drill bit x6pcs. Wood drill bit x5pcs, Screw bit 100mm x6pcs.
Screw bit 50mmx34pcs. Socket x5pcs.
MAKPAC 116pcs. Bit & Hand tool set
18pcs. Metal drill bit box set, 47pcs. Ratchet & Bit set,
48pcs. HSS-G, screw & Screw bit set, Tape measure 3m
Snap-off knife, LED pen light

metric size Type MZ

metric size Type MZ
Part No.
Part No.
B-53768
B-49884

MAKPAC 62pcs. Drill & Screw bit set

18pcs. Metal drill box set, 37pcs. Screw bit set, Socket x5pcs. Drywall bit, MAKPAC 65pcs. Set for SDS-PLUS
Sleeve chuck bit holder HSS-TiN drill bit for SDS-PLUS x8pcs. Wood drill bit for SDS-PLUS x5pcs, Masonry drill
bit for SDS-PLUS x5pcs , Screw bit 25mm x40pcs. ,Nutsetter x4pcs.
Countersink,Sleevechuck bitholder for SDS-PLUS,Measure

metric size Type MZ

Part No.
B-53908
metric size
Part No.
B-69478
MACCESS series Circle series come with bit
MACCESS series contains high quality items of screw bits, drill bits, hand tools, and
so on. We are sure that the professional users will be satisfied with these bit sets of
and hand tool set
MACCESS. These series are more reasonable
than MACCESS series.

50pcs. Bit & Hand tool display set (6pcs. set)

Masonry drill bit x6pcs. Wood drill bit x5pcs, Flat bit x2pcs. HSS-R drill bit x11pcs.
Diameter gauge 1-10mm, Countersink bit, Knife,
Screw bit 25mm x18pcs. Magnetic bit holder, Socket x3pcs. Socket adapter

34pcs. Combination set

HSS-R metal drill bit x7pcs. Masonry drill bit x5pcs., Brad point drill bit x5pcs. metric size Type
metric size
Countersink bit, Screw bit 25mm x12pcs. Nutsetter x3pcs. Magnetic bit holder NZ (Bulk, without
Type MZ
counter display)
Part No. Part No.

metric size Type MZ D-42313-6 D-53687

Part No.

D-36996 65pcs. Ratchet & Bit display set (6pcs. set)

Rachet driver, Screw bit 50mm x10pcs. Screw bit 25mm x31pcs, Magnetic bit holder,
Flex shaft, Socket mm x6pcs, Socket inch x6pcs. Socket adapter for 25mm screw
driverr
71pcs. Combination set
HSS-TiN drill bit x12pcs., Masonry drill bit x5pcs. Brad point drill bit x 5pcs. Flat bit
x3pcs., Countersink bit, Screw bit 25mm x24pcs. Magnetic bit holder, Sleeve chuck metric size Type MZ
bit holder, Screw bit 50mm x10pcs. Nutsetter x4pcs. Measure 3m, Center ponch,
Diameter gauge, Cutter knife with 7 spare blades (1set), Screw driver for C form Part No.
(hand tool)
D-42329-6

metric size Type MZ

Part No. 71pcs. Bit & Hand tool set (6pcs. set)
Masonry drill bit x6pcs. Wood drill bit x5pcs, Flat Bit x3pcs. HSS-R drill bit x11pcs.
D-37144 Measure 3m, Diameter gauge 1-10mm, countersink,
Screw bit 50mm x10pcs. Socket x7pcs. Screw bit 25mm x24pcs. Magnetic bit holder,
Socket adapter for 25mm screw driver
104pcs. Combination set
HSS-TiN drill bit x14pcs. Masonry drill bit x5pcs. Brad point drill bit x7pcs. Flat bits metric size Type
metric size
x3pcs. Countersink, Depth guage x4pcs. Hex. wrench 2.5 for depth gauge, Screw bit NZ (Bulk, without
Type MZ
25mm x40pcs. Magnetic bit holder, Sleeve chuck bit holder, Screw bit 50mm x18pcs, counter display)
Nutsetter x4pcs., Leveler, Measure 3m, Diameter gauge, Cutter knife with 7 spare
Part No. Part No.
blades (1set), Screw driver for C form (hand tool)
D-47189-6 D-53001
metric size Type MZ

Part No. 100pcs. Bit & Hand tool display set (5pcs. set)
D-37150 Masonry drill x7pcs. Wood drill x5pcs, Flat dit x3pcs. HSS-R drill bit x11pcs.
Hole saw, Hole saw arbor, Depth stop, Level , Diameter gauge 1-10mm, Hex key
wrench , Countersink, Rachet driver ,Screw bit 25mm x24pcs. Magnetic bit holder,
Socket x8pcs. Socket adapter for 25mm screw driver, LED light
200pcs. Combination set
HSS-TiN drill bit x16pcs. Masonry drill bit x7pcs. Brad point drill bit x7pcs. Flat bit
x3pcs. Screw bit 100mm x16pcs. Screw bit 50mm x42pcs. Screw bits 25mm x66pcs.
Sleeve chuck bit holder, Nutsetter x10pcs. Depth gauges x4pcs. Hex. wrench 2.5 for metric size Type MZ
depth gauge, Countersink, Hole saw x5pcs. Arbor for hole saw, Leveler, Measure 5m,
Diameter gauge, Cutter knife with 7 spare blades (1set), Pen light, 300mm flexible Part No.
bit holder, Nutsetter x8pcs. Socket adapter, Ratchet for screwdriver, Nose plier,
Combination plier, Center ponch, Adjustable wrench D-42335-5

metric size Type MZ

103pcs. Bit & Hand tool display set (5pcs. set)
Part No. Masonry drill x7pcs. Wood drill x7pcs. Flat bit x3pcs. HSS-R drill bit x11pcs, Hole saw,
Hole saw arbor, Depth stop, Measure 3m, Diameter gauge 1-10mm, Hex key wrench,
D-37203 Level, Countersink, Screw bit 25mm x24pcs, Magnetic bit holder, Socket x7pcs.
Socket adapter for 25mm screw driver,
Long nose plier, Comnination plire,
Adjustable wrench, Nail hammer

metric size Type

metric size
NZ (Bulk, without
Type MZ
counter display)
Part No. Part No.

D-42341-5 D-53017
Square series 77pcs. Combination set
Square series does not contain neither HSS-R drill bit x12pcs. Masonry drill bit x6pcs. Wood drill bit x5pcs. Flat bit x3pcs,
high quality expensive items nor hand Screw bit 25mm x 32pcs. Nutsetter x 6pcs. Screw bit 50mm x 10pcs, Magnetic bit
tools, to keep it less expensive. holder, Countersink, Diameter gauge

metric size Type MZ

Part No.

D-47232-5
17pcs. Combination set
HSS-R drill bit x4pcs. Masonry drill bit x4pcs.
Screw bit 25mm x12pcs. Magnetic bit holder 100pcs. Combination set
HSS-R metal drill bit x14pcs. Masonry drill bit x6pcs. Wood drill bit x7pcs.
Flat bit x3pcs. Screw bit 25mm x40pcs. Nutsetterx6pcs. Screw bit 50mm x16pcs.
Depth gauge x4pcs. Hex. wrench 2.5 for depth gauge, Countersink, Magnetic bit
holder, Diameter gauge

metric size Type MZ metric size Type NZ inch size Type MZ

Part No. Part No. Part No.

metric size Type MZ
D-40216 D-53693 D-45836
Part No.

D-47254-5
30pcs. Combination set
HSS-R drill bit x4pcs. Masonry drill bit x4pcs. Wood drill bit x4pcs. Screw bit 25mm
x16pcs. Magnetic bit holder, Countersink
201pcs. Combination set
HSS-R drill bit x25pcs. Masonry drill bit x11pcs. Wood drill bit x12pcs. Flat bit x5pcs.
Countersink bit, Depth gauge x4pcs. Hex. wrench 2.5 for depth gauge, Hole saws
x5pcs. Hole saw arbor, Screw bit 25mm x60pcs. Screw bit 50mm x50pcs. Nutsetter
x10pcs. Sockets for hand tool x9pcs. Socket adopter 25mm, Socket adopter 50mm,
SLeeve chuck Bit holder, Magnetic bit holder, Bit stopper, Diameter gauge, Screw
guide

metric size Type MZ metric size Type NZ (Bulk, without counter display)

Part No. Part No.

D-47210-10 D-53702 metric size Type MZ

Part No.

34pcs. Combination set D-47276-2

HSS-TiN drill bit x7pcs, Masonry drill x 5pcs. , Wood dril x 5pcs. Nutsetter x3pcs.
Screw bit 25mm x12pcs, Magnetic bit holder, Countersink,
Tablet case series
This is a slim case set and easy to carry and it is stylish design.
You can put in and take out the bits smoothly and it will increase your work effort.

metric size Type MZ (Bulk,

without counter display)
Part No.
B-68498

42pcs. Combination set (1/4" Hex shank)

HSS-G drill bit x5pcs, Nutsetter x7pcs. Screw bit 50mm x25pcs, Screw bit 100mm 33pcs. Tablet case set
x2pcs. Magnetic bit holder, Socket adapter 1/4", Screw bit holder HSS-R drill bit x7pcs. Masonry drill bit x5pcs. Wood drill bit x6pcs. Screw bit 25mm
x10pcs.
Nutsetter x3pcs, Countersink bit, Magnetic bit holder

metric size Type MZ (Bulk,

without counter display)
Part No. metric size Type MZ
D-58877 Part No.

B-49389
Accessory set 17pcs. Drill bits & Screw bit set
Accessory set is the set item with the reasonable price. This is the item eliminating with Textile Case metric size packed in double blister pack 1/4'' Hex. Shank, HSS-TiN
the window on the plastic case of Square series. metal drill bit x4pcs., wood drill bit x2pcs. Screw bit x11pcs. magnetic bit holder

metric size, Type MZ metric size, Type NZ

Part No. Part No.

75pcs. Drill & Screw bit set D-31762 D-31893
metric size Type MZ
HSS-TiN drill Bit x19pcs. Masonry drill bit x5pcs. Wood drill bit x4pcs. Screw bit
25mm x20pcs.
Screw bit 50mm x16pcs. Nutsetter x8pcs, Countersink bit, Center punch, Magnetic Drill bit assortment
bit holder

9pcs. Assortment
metric size Type MZ HSS-TiN drill bit , Carbide tipped drill bit, Wood drill bit
Part No.

B-49373

metric size inch size

100pcs. Drill & Screw bit set
HSS-R drill Bit x6pcs. Masonry drill bit x4pcs. Wood drill bit x7pcs. Flat bit x2pcs. Part No. Part No. Part No.
Screw bit 25mm x61pcs. Screw bit 50mm x12pcs. Nutsetter x3pcs, Countersink bit,
Hole saw x2pcs, Hole saw adapter, Magnetic bit holder D-16405 D-30069 D-16449

HSS Metal drill 5pcs. drill bit assortment

for metal 5/ 6/ 8mm, for wood 6/ 8mm

metric size, Type MZ metric size, Type MZ

Size of screw bit : mainly PZ Size of screw bit : mainly PH

metric size , Type MZ inch size, Type MZ
Part No. Part No.
Part No. Part No.
B-54520 B-54879
D-30106 D-30112

102pcs. Drill & Screw bit set

HSS-TiN drill Bit x13pcs. Masonry drill bit x10pcs. Wood drill bit x6pcs. Screw bit 18pcs. Metal drill box set
25mm x30pcs. Screw bit 50mm x20pcs. Drywall bit 25mm x 3pcs. Nutsetter x14pcs., HSS-G metal drill bit (for metal)
Countersink bit, Magnetic bit holder,Diameter guage,Depth stop,Hex wrench Masonry drill bit (for brick)
Wood drill bit (for wood)

metric size Type MZ metric size inch size

Part No. Part No. Part No.

B-68432 D-46399 D-59178

Drill bit assortment with 1/4'' Hex. shank 21pcs. Drill bit assortment set
M-force HSS metal drill bit (for metal)
Masonry drill bit (for masonry)
Wood drill bit (for wood)

for metal 5, 6, 8mm, for wood 5, 6mm

metric size, Type MZ metric size, Type NZ
Part No. Part No.
metric size
D-20769 D-31516
Part No.
for masonry 6mm, for wood 5, 6mm, for metal 5, 6mm
D-23759 D-31522 B-44884
for masonry 3/16'', 1/4'',for metal & wood 1/8'', 3/16'', 1/4''
inch size, Type MZ Part No.
D-23765
38pcs. Drill & Screw bit set
HSS-R Drill Bit x4pcs. Screw bit 25mm x21pcs. Screw bit 50mm x6pcs.
Screw bit 100mm x3pcs. Nutsetter 2pcs. Socket adapter, Magnetic Bit Holder

metric size, Type MZ

Size of screw bit : mainly PZ

Part No.

B-54106

71pcs. Drill & Screw bit set

HSS-R Drill Bit x10pcs. Flat Bit x5pcs. Screw bit 25mm x45pcs.
Screw bit 50mm x10pcs. Magnetic Bit Holder

Inch size Type MZ

metric size Type MZ (Package & counter display: MC
design)
Part No. Part No.
B-50295 B-50273

47pcs. Ratchet & Bit set

Screw bit 25mm, Nutsetter, SLeeve chuck bit holder, Ratchet screwdriver

Inch size Type MZ

metric size Type MZ (Package & counter display: MC
design)
Part No. Part No.
B-36186-10 B-50289

48pcs. HSS-G/ Screw & Socket set

Screw bit 25mm, Nutsetter, SLeeve chuck bit holder, HSS-G drill bit

metric size, Type MZ

Part No.

B-36201-10
ACCESSORIES
Cutting

Dia / Bore No. Teeth Kerf Thickness

Rake Ring Rip cut Cross cut

Tip embedded Silent M-Force Fast cut

Clean cut Extra clean cut Coated Heavy duty

Long life PCD tip Sharp

Accessories 93

Carbide-tipped saw blade

(Wood/Metal)
Drilling
Tooth shape

ATB ATAF ATAFR M-FORCE FTG TCG

(Masonry)
Drilling
Fastening
Alternate top bevel Alternate top alternate Added flat teeth to ATAF Tooth front and top Flat teeth, allows easy Trapezoidal and flat teeth
for easy straight cutting. straight cutting and tips are arranged alternatively

Screw Bit Sets

For wood and aluminum. face shapes symmetric V

Drill and
are rarely chipped. For and they divide debris by
ATBR: Added flat teeth to Enables to cut wood MATAFR: Modified ATAFR groove having features cutting wood along the three. Allows easy straight
ATB for easy straight fiber sharply. for less cutting resistance. of ATB and FTG. grain and cutting thin cutting and tips are rarely
cutting metal. chipped.

Cutting
MTCG SMTCG Hi-ATB

Reciprosawing
Jigsaw /
Brushing
Flat teeth with alternating Contrast to MTCG, Alternate top bevel (ATB) Special tooth design increased work amount per 1 battery

Bonded Abrasive
bevel Less cutting asymmetric two bevels on a with a larger top bevel charge
resistance than flat teeth. tooth top producing sharp angle
Tips are rarely chipped edges Allows easy bite to
materials.

Coated Abrasive
Technical term Multi Tool

Laser Slit Coated Tip Embedded P.C.D Tip

Diamond
Routering
Planing /

Vibration dampening system PTFE (polytetrafluoroethylene) Inserted tooth design will greatly PCD (Poly-Crystalline Diamond)
OPE

Resinbond filled laser cut body coating plate to reduce pitch increases the body-to-tip braze tips has extreme hardness and
slots for smoother and quieter build-up and to lower resistance. area for greater support and tip wear resistance. PCD tipped saw
cuts. strength. blade is the best choice for long
lasting performance when
cutting fiber cement board.
Miscellaneous
 94

This movie was filmed in Japan.

Models and specs may vary by country.

Feature of EFFICUTs
EFFICIENT
Sharp top angle
Cutting

Enable you to make a

fine cut surface with
only little effort. More cuts per charge
Reciprosawing

EFFICIENT
Jigsaw /

Curved body
Allows the excellent
chip chute perfomance.

Fast cutting
Brushing

EFFICIENT
Slimmed bottom
Realizes long life battery
Bonded Abrasive

by saving cutting
resistance.

Longer life
Coated Abrasive

Plate: 1.6mm The amount of cutting per 1 charge

× 2.4
100 more
165mm x 48T
Multi Tool

Plate: 1.0mm

240 1. The test results depend to a great extent on the hardness of

wood materials, etc.
EFFICUT 165mm x 50T 2. The cutting amount bar graphs are relative values when the
Diamond

capacity of current blade (Thickness : 1.6 mm) is indexed at 100.

0 100 200
Routering
Planing /

Outer Outer Outer Outer

Bore No. of Bore No. of Bore No. of Bore No. of
dia Part No. dia Part No. dia Part No. dia Part No.
(mm) teeth (mm) teeth (mm) teeth (mm) teeth
(mm) (mm) (mm) (mm)
OPE

165 20 25 B-63018 185 20 45 B-68616 260 25.4 45 B-64668 305 25.4 60 B-67452

165 20 56 B-57364 190 20 24 B-64200 260 25.4 60 B-67430 305 25.4 80 B-67468
Miscellaneous

165 20 60 B-69892 190 20 45 B-68644 260 25.4 80 B-67446 305 25.4 100 B-67474

185 20 24 B-62022 235 25 24 E-01959

 95

This movie was filmed in Japan.

Models and specs may vary by country.

Feature of EFFICUTs
EFFICIENT
Strong and least chipping

Cutting
More cuts per charge

Reciprosawing
EFFICIENT

Jigsaw /
Release swarf smoothly

Fast cutting

Brushing
EFFICIENT
Release swarf smoothly

Bonded Abrasive
Longer life

Coated Abrasive
Plate: 1.2mm The amount of cutting per 1 charge

100 x1.6
150mm x 32T more Multi Tool
Plate: 0.95mm

160
Diamond

Model: DCS553 ( BL1860B )

EFFICUT 150mm x 33T Material: Carbon steel pipe ( Dia: 31mm / Thickness: 3mm )
0 100 200
Routering
Planing /

Outer dia Bore

No. of teeth Part No.
(mm) (mm)

136 20 30 B-69428
OPE

136 20 45 B-69434

150 20 33 B-69440
Miscellaneous

150 20 48 B-69456
for Wood

Ideal for Cordless Circular Saw

(Circular Saw)
Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth

165 20 - 1.4 1.0 25 23 ATAFR Wood 1 B-63018

Specialized for cordless saws

165 20 - 1.45 1.0 56 23 ATAFR Wood/MDF 1 B-57364

Specialized for cordless saws

185 20 - 1.45 1.0 24 23 ATAFR Wood  1 B-62022

185 20 - 1.45 1.0 45 23 ATAFR Wood  1 B-68616

190 20 - 1.45 1.0 24 23 ATAFR Wood 1 B-64200

Specialized for cordless saws

190 20 - 1.45 1.0 45 23 ATAFR Wood 1 B-68644

Specialized for cordless saws

235 25 - 2.2 1.5 24 20° ATBR Wood  1 E-01959

Ideal for Cordless Plunge Saw

(Plunge Cut Circular Saw)

Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth

165 20 - 1.45 1 56 23 ATAFR Wood/MDF 1 B-57364

Specialized for
cordless saws

Ideal for Cordless Slide Compound Saw

(Slide Compound Saw / Miter Saw)

Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
165 20 - 1.85 1.35 60 10 ATBR Wood 1 B-69892

260 25.4 - 2.15 1.65 45 10 ATAFR Wood 1 B-64668


260 25.4 - 2.15 1.65 60 10 ATAFR Wood 1 B-67430

260 25.4 - 2.15 1.65 80 10 ATAFR Wood 1 B-67446

305 25.4 - 2.15 1.65 60 10 ATAFR Wood 1 B-67452

305 25.4 - 2.15 1.65 80 10 ATAFR Wood 1 B-67468

305 25.4 - 2.15 1.65 100 10 ATAFR Wood 1 B-67474

for Metal
Ideal for Cordless Metal Cutting Saw

Outer dia Bore Ring Kerf Plate No. of

Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
136 20 - 1.1 0.95 30 0 EFFICUT METAL Metal 1 B-69428

136 20 - 1.1 0.95 45 0 EFFICUT METAL Metal & SUS 1 B-69434

150 20 - 1.1 0.95 33 0 EFFICUT METAL Metal 1 B-69440

150 20 - 1.1 0.95 48 0 EFFICUT METAL Metal & SUS 1 B-69456

for Wood
Ideal for Cordless Circular Saw
Double cut tooth

(Circular Saw)
Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
165 20 - 1.45 1.0 44 23 MATAFR MDF / Wood Coated / Laser Slit 1 B-53279
190 20 - 1.45 1.0 44 23 MATAFR MDF / Wood Coated / Laser Slit 1 B-54508

Ideal for Cordless Plunge Saw

(Plunge Cut Circular Saw)

Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
Specialized for
165 20 - 1.6 1.1 55 20 ATAFR Wood/MDF 1 B-57059
cordless saws

Ideal for Cordless Slide Compound Saw Double cut tooth

(Slide Compound Saw / Miter Saw)

Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
ATBR (4+1) Coated / Laser Slit
190 20 - 1.7 1.3 60 20 MDF / Wood 1 B-53291
Extra sharp tooth Europe design

for Wood
Ideal for Cordless Circular Saw Double cut tooth

(Circular Saw)
Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
165 20 - 1.45 1.0 44 23 MATAFR Wood - 1 B-53285
190 20 - 1.45 1.0 44 23 MATAFR Wood - 1 B-54514
Ideal for Cordless Slide Compound Saw

(Slide Compound Saw / Miter Saw)

Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
165 20 - 1.9 1.4 64 10 ATAF Wood Laser Slit 1 B-56487

Standard wood cutting

Outer dia Bore Ring Kerf Plate No. of

Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth

(Cordless Saw)   
85 15 - 1 0.7 20 10 ATB Wood - 1 B-14607
136 20 - 1.5 1.0 16 20 ATB Wood - 1 B-09949
165 20 - 1.5 1.0 24 20 ATAF Wood - 1 A-85101
165 20 - 1.6 1.0 40 18 ATAF Wood - 1 A-85226
165 20 - 1.6 1.0 52 20 ATAF Wood - 1 A-85189

(Cordless Slide Compound Saw)   

190 20 - 1.9 1.4 40 10 ATB Wood - 1 A-86147

(Circular Saw)   
110 20 - 1.85 1.3 12 20 ATB Wood - 1 A-81723
110 20 - 1.6 1 24 10 ATAF Wood - 1 B-16944
110 20 - 1.8 1.2 24 10 ATAF Wood - 1 A-88864
110 20 - 1.8 1.2 30 10 ATAF Wood - 1 A-81365
110 20 - 1.6 1 30 10 ATAF Wood - 1 B-16950
160 20 - 2.2 1.4 24 25 ATB Wood - 1 A-81371
160 20 - 1.8 1.2 24 25 ATB Wood - 1 B-16966
160 20 - 2.2 1.4 30 20 ATAF Wood - 1 A-81876
160 20 - 1.8 1.2 30 20 ATAF Wood - 1 B-16972
160 20 - 2.2 1.4 32 20 ATAF Wood - 1 A-81387
160 20 - 2.2 1.4 36 20 ATAF Wood - 1 A-81882
160 20 - 1.8 1.2 36 20 ATAF Wood - 1 B-16988
160 20 - 1.6 1 40 18 ATAF Wood - 1 A-80612
160 20 - 1.8 1.2 40 20 ATAF Wood - 1 B-16994
160 20 - 2.2 1.4 40 20 ATAF Wood - 1 A-81898
160 20 - 2.2 1.4 48 20 ATAF Wood - 1 A-81907
160 20 - 1.8 1.2 48 20 ATAF Wood - 1 B-17005
160 20 - 2.2 1.4 60 15 ATAF Wood - 1 A-81393
160 20 - 2 1.4 60 15 ATAF Wood - 1 A-82688
160 20 - 1.8 1.2 60 15 ATAF Wood - 1 B-17011
165 20 - 2 1.4 10 20 FTG Wood - 1 B-02917
165 20 - 2 1.2 16 15 M-FORCE Wood - 1 A-89698
165 20 - 2 1.3 16 23 ATB Wood - 1 A-86022
165 20 - 2 1.2 24 15 M-FORCE Wood - 1 A-89707
165 20 - 2 1.3 24 23 ATB Wood - 1 A-86038
165 20 - 1.6 1 40 18 ATAF Wood - 1 A-82454
165 20 - 2 1.3 40 18 ATB Wood - 1 A-86044
165 20 - 1.6 1 60 18 ATAF Wood - 1 A-82460
180 20 - 2.2 1.4 24 25 ATB Wood - 1 A-81402
180 20 - 2.2 1.4 30 20 ATAF Wood - 1 A-81913
180 20 - 2.2 1.4 36 20 ATAF Wood - 1 A-81929
180 20 - 2.2 1.4 40 20 ATAF Wood - 1 A-81418
Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
180 20 - 2.2 1.4 48 20 ATAF Wood - 1 A-81935
180 20 - 2 1.4 60 15 ATAF Wood - 1 A-82694
180 20 - 2.2 1.4 60 15 ATAF Wood - 1 A-81424
185 20 - 2 1.2 16 15 M-FORCE Wood - 1 A-89713
185 20 - 1.85 1.3 20 25 ATB Wood - 1 A-83814
185 20 - 2 1.2 24 15 M-FORCE Wood - 1 B-03816
185 20 - 1.6 1 40 18 ATAF Wood - 1 A-82476
185 20 - 2 1.4 40 18 ATAF Wood - 1 A-85999
185 19 - 1.6 1 40 18 ATAF Wood - 1 B-05181
185 20 - 1.6 1 60 18 ATAF Wood - 1 A-82482
190 20 - 2 1.4 24 20 ATAF Wood - 1 A-87507
235 25 - 2.3 1.6 20 20 ATB Wood - 1 A-89947
235 20 - 2.3 1.6 20 15 M-FORCE Wood - 1 B-04092
235 30 25 2.3 1.6 20 25 ATB Wood - 1 A-80678
235 25.4 25 2.6 1.8 24 25 ATB Wood - 1 A-81985
235 25.4 25 2.6 1.8 30 25 ATB Wood - 1 A-81991
235 25.4 25 2.6 1.8 36 25 ATB Wood - 1 A-82002
235 25.4 25 2.6 1.8 40 25 ATB Wood - 1 A-81468
235 20 - 2.3 1.6 40 15 M-FORCE Wood - 1 B-04101
235 25.4 25 2.6 1.8 48 20 ATAF Wood -- 1 A-82018
235 25.4 25 2.6 1.8 60 20 ATAF Wood - 1 A-81474
235 25.4 25 2.4 1.6 60 20 ATAF Wood - 1 A-82719
235 25.4 25 2.6 1.6 80 15 ATAF Wood - 1 A-81480
260 25.4 - 2.3 1.6 24 20 ATB Wood - 1 B-10584
270 25.4 - 2.6 1.8 18 20 ATB Wood - 1 B-12843
335 25 - 3 2.2 60 20 ATB Wood - 1 B-12603
415 25 - 2.6 1.8 60 20 ATB Wood - 1 792118-8
Economy (Circular Saw)   
165 20 - 1.6 1 40 18 ATAF Wood - 1 B-17027
180 20 - 1.8 1.2 24 25 ATB Wood - 1 B-17033
180 20 - 1.8 1.2 30 20 ATAF Wood - 1 B-17049
180 20 - 1.8 1.2 36 20 ATAF Wood - 1 B-17055
180 20 - 1.8 1.2 40 20 ATAF Wood - 1 B-17061
180 20 - 1.8 1.2 48 20 ATAF Wood - 1 B-17077
185 20 - 1.6 1 40 18 ATAF Wood - 1 B-17083
235 25.4 25 2.4 1.6 24 25 ATB Wood - 1 B-17164
235 25.4 25 2.4 1.6 30 25 ATB Wood - 1 B-17170
235 25.4 25 2.4 1.6 36 25 ATB Wood - 1 B-17186
235 25.4 25 2.4 1.6 40 25 ATB Wood - 1 B-17192
235 25.4 25 2.4 1.6 48 20 ATAF Wood - 1 B-17201
235 25.4 25 2.4 1.6 60 20 ATAF Wood - 1 B-17217
235 25.4 25 2.4 1.6 80 15 ATAF Wood - 1 B-17223

(Slide Compound Saw / Miter Saw)   

190 20 - 2.2 1.6 24 5 ATB Wood - 1 B-03850
190 20 - 2 1.4 24 -5 ATB Wood - 1 B-03866
190 20 - 2 1.4 40 10 ATAF Wood - 1 A-86751
190 20 - 2 1.4 60 -5 ATB Wood - 1 B-03981
190 20 - 2 1.4 60 5 ATB Wood - 1 B-04008
190 20 - 2 1.4 72 10 ATAF Wood - 1 A-86359
210 25 - 2 1.4 80 8 ATB Wood - 1 792438-0
216 25.4 - 2.4 1.6 48 5 ATB Wood - 1 B-39497
255 25.4 - 2.3 1.8 32 5 ATAF Wood - 1 A-83696
255 25.4 - 2.2 1.7 40 10 ATAF Wood - 1 B-10322
255 25.4 - 2.3 1.8 40 5 ATB Wood - 1 B-03626
255 25.4 - 2.3 1.8 60 5 ATB Wood - 1 B-03632
255 25.4 - 2.3 1.8 80 5 ATB Wood - 1 B-03648
255 25.4 25 2.8 2 80 15 ATAF Wood - 1 A-82286
255 25.4 - 2.3 1.8 100 5 ATB Wood - 1 B-03654
255 25.4 25 2.6 2 100 15 ATAF Wood - 1 A-82292
255 25.4 25 2.6 2 120 15 ATAF Wood - 1 A-82301
260 25.4 - 2.3 1.8 50 15 ATB Wood - 1 A-88973
260 25 - 2.3 1.8 64 5 ATAF Wood - 1 792695-0
305 25.4 - 2.5 1.9 70 0 ATAF Wood - 1 B-57560
305 25.4 - 2.3 1.8 40 5 ATB Wood - 1 B-03660
305 25.4 - 2.6 2 60 10 ATAF Wood - 1 A-85472
305 25.4 - 2.3 1.8 60 5 ATB Wood - 1 B-03676
305 25.4 - 2.3 1.8 60 5 ATAF Wood - 1 B-02808
305 25.4 - 2.3 1.8 80 5 ATB Wood - 1 B-03682
305 25.4 25 3.2 2.2 80 15 ATAF Wood - 1 A-82317
Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
305 25.4 - 2.3 1.8 96 5 ATAF Wood - 1 B-02814
305 25.4 -- 2.3 1.8 100 5 ATB Wood - 1 B-03698
305 25.4 25 3 2.2 100 15 ATAF Wood - 1 A-82323
305 25.4 25 3 2.2 120 15 ATAF Wood - 1 A-82339
355 25 - 3 2.2 60 20 ATB Wood - 1 A-02618
355 25.4 - 2.6 2 60 10 ATB Wood - 1 A-85488
355 25.4 25 3.4 2.4 80 15 ATAF Wood - 1 A-82345
355 25.4 25 3.4 2.4 100 15 ATAF Wood - 1 A-82351
355 25.4 25 3.4 2.4 120 15 ATAF Wood - 1 A-82367
Economy (Slide Compound Saw / Miter Saw)   

(Table Saw)   
203 25.4 - 2.4 1.6 24 25 ATB Wood - 1 A-81941
203 25.4 25 2.4 1.6 30 25 ATB Wood - 1 A-81957
203 25.4 - 2.4 1.6 36 20 ATAF Wood - 1 A-81963
203 25.4 25 2 1.4 40 20 ATAF Wood - 1 A-82498
203 25.4 25 2.4 1.6 40 20 ATAF Wood - 1 A-81430
203 25.4 25 2.4 1.6 48 20 ATAF Wood - 1 A-81979
203 25.4 25 2 1.4 60 15 ATAF Wood - 1 A-82507
203 25.4 25 2.4 1.6 60 15 ATAF Wood - 1 A-81446
203 25.4 25 2.2 1.6 60 15 ATAF Wood - 1 A-82703
203 25.4 25 2.4 1.6 80 15 ATAF Wood - 1 A-81452
255 25.4 - 2.3 1.6 24 20 ATB Wood - 1 B-05000
255 25.4 25 2.4 1.8 24 25 ATAF Wood - 1 A-82513
255 25.4 - 2.4 1.8 24 25 ATAF Wood - 1 A-87890
255 25.4 25 3.2 2.2 24 25 ATB Wood - 1 A-82024
255 25.4 25 3.2 2.2 30 25 ATB Wood - 1 A-82030
255 25.4 - 3.2 2.2 36 25 ATB Wood - 1 A-82046
255 25.4 - 2.3 1.6 40 20 ATB Wood - 1 B-05088
255 25.4 25 2.4 1.8 40 20 ATAF Wood - 1 A-82529
255 25.4 25 2.8 2.2 40 25 ATB Wood - 1 A-81496
255 25.4 25 3.2 2.2 40 25 ATB Wood - 1 A-82725
255 25.4 25 3.2 2.2 48 20 ATAF Wood - 1 A-82052
255 25.4 25 2.8 2 60 20 ATAF Wood - 1 A-81505
255 25.4 25 2.8 2 80 15 ATAF Wood - 1 A-81511
305 25.4 25 3.4 2.4 30 25 ATB Wood - 1 A-82068
305 25.4 25 3.4 2.4 36 25 ATB Wood - 1 A-82074
305 25.4 25 3.4 2.4 40 25 ATB Wood - 1 A-82080
305 25.4 25 3.4 2.4 48 20 ATAF Wood - 1 A-82096
305 25.4 25 3 2 60 20 ATAF Wood - 1 A-82105
355 25.4 25 3.6 2.6 30 25 ATB Wood - 1 A-82111
355 25.4 25 3.6 2.6 36 25 ATB Wood - 1 A-82127
355 25.4 25 3.6 2.6 40 25 ATB Wood - 1 A-82133
355 25.4 25 3.4 2.4 48 25 ATB Wood - 1 A-81527
355 25.4 25 3.6 2.6 48 25 ATB Wood - 1 A-82731
355 25.4 25 3.4 2.4 60 20 ATAF Wood - 1 A-82149
355 25.4 25 3.4 2.4 80 20 ATAF Wood - 1 A-81533
355 25.4  3.4 2.4 100 15 ATAF Wood - 1 A-81549
405 25.4 25 3.8 2.6 30 25 ATB Wood - 1 A-82155
405 25.4  3.6 2.6 36 25 ATB Wood - 1 A-82161
405 25.4 25 3.6 2.6 40 25 ATB Wood - 1 A-82177
405 25.4  3.6 2.6 48 25 ATB Wood - 1 A-81555
405 25.4 25 3.4 2.4 60 20 ATAF Wood - 1 A-82183
405 25.4 25 3.6 2.6 80 20 ATAF Wood - 1 A-81561
405 25.4 25 3.6 2.6 100 15 ATAF Wood - 1 A-82395
405 25.4 25 3.6 2.6 120 15 ATAF Wood - 1 A-81577
Economy (Table Saw)   
203 25.4 25 2 1.4 24 25 ATB Wood - 1 B-17099
203 25.4 25 2 1.4 30 25 ATB Wood - 1 B-17108
203 25.4 25 2 1.4 36 20 ATAF Wood - 1 B-17114
203 25.4 25 2 1.4 40 20 ATAF Wood - 1 B-17120
203 25.4 25 2 1.4 48 20 ATAF Wood - 1 B-17136
203 25.4 25 2 1.4 60 15 ATAF Wood - 1 B-17142
203 25.4 25 2 1.4 80 15 ATAF Wood - 1 B-17158
255 25.4 25 2.8 2 24 25 ATB Wood - 1 B-17239
255 25.4 25 2.8 2 30 25 ATB Wood - 1 B-17245
255 25.4 25 2.8 2 36 25 ATB Wood - 1 B-17251
255 25.4 25 2.8 2 40 25 ATB Wood - 1 B-17267
255 25.4 25 2.8 2 48 20 ATAF Wood - 1 B-17273
255 25.4 25 2.4 1.8 60 20 ATAF Wood - 1 B-17289
255 25.4 25 2.4 1.8 80 15 ATAF Wood - 1 B-17295
Outer dia Bore Ring Kerf Plate No. of
Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth
305 25.4 25 3 2.2 30 25 ATB Wood - 1 B-17332
305 25.4 25 3 2.2 36 25 ATB Wood - 1 B-17348
305 25.4 25 3 2.2 40 25 ATB Wood - 1 B-17354
305 25.4 25 3 2.2 48 20 ATAF Wood - 1 B-17360
305 25.4 25 2.8 2 60 20 ATAF Wood - 1 B-17376
305 25.4 25 2.6 2 80 15 ATAF Wood - 1 B-17382
355 25.4 25 3.2 2.4 30 25 ATB Wood - 1 B-17413
355 25.4 25 3.2 2.4 36 25 ATB Wood - 1 B-17429
355 25.4 25 3.2 2.4 40 25 ATB Wood - 1 B-17435
355 25.4 25 3 2.2 48 25 ATB Wood - 1 B-17441
355 25.4 25 3 2.2 60 20 ATAF Wood - 1 B-17457
355 25.4 25 3 2.2 80 20 ATAF Wood - 1 B-17463
405 25.4 25 3.2 2.4 30 25 ATB Wood - 1 B-17479
405 25.4 25 3.2 2.4 36 25 ATB Wood - 1 B-17485
405 25.4 25 3.2 2.4 40 25 ATB Wood - 1 B-17491
405 25.4 25 3.2 2.4 48 25 ATB Wood - 1 B-17500
405 25.4 25 3 2.2 60 20 ATAF Wood - 1 B-17516
405 25.4 25 3 2.2 80 20 ATAF Wood - 1 B-17522

for quiet cutting

Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Slide Compound Saw / Miter Saw)   

190 20 - 2.2 1.6 24 5 ATB Wood Laser Slit 1 B-04298
260 25.4 - 2.3 1.8 70 5 ATAF Wood Laser Slit 1 B-04793
305 25.4 - 2.5 1.9 70 0 ATAF Wood Laser Slit 1 B-04802

for plunge cutting

Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Plunge Cut Circular Saw)   

165 20 - 2.0 1.4 28 15 ATB Wood - 1 B-56649
165 20 - 2.2 1.6 28 15 ATB Wood - 1 B-07434
165 20 - 1.85 1.25 48 8 ATB Wood - 1 B-56166
165 20 - 2.2 1.6 48 8 ATB Wood - 1 B-07353
165 20 - 2.0 1.4 60 5 Hi-ATB MDF - 1 B-56661
165 20 - 2.0 1.4 60 5 TCG MDF - 1 B-56677
165 20 - 2.0 1.4 48 5 TCG CORIAN® - 1 B-56683
165 20 - 2.4 1.7 48 5 TCG CORIAN® - 1 B-10344
165 20 - 2.0 1.4 56 -3 TCG Aluminum - 1 B-56655
165 20 - 2.4 1.7 56 -3 TCG Aluminum - 1 B-07440

for Fiber-cement board cutting

Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Circular Saw)   
185 20 - 2 1.5 28 10 ATAF Fiber Cement Board for 5057KB 1 A-86088

for sandwich panel cutting

Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth
165 20 - 1.75 1.4 42 0 SMTCG sandwich panel - 1 B-63161
for aluminum
Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Cordless Saw)
136 20 - 1.6 1 50 0 ATB Aluminum - 1 B-40331
150 20 - 1.6 1 52 0 ATB Aluminum - 1 B-47020

(Cordless Slide Compound Saw / Miter Saw)

Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth
165 20 - 1.8 1.2 60 5 TCG Aluminum Laser Slit 1 B-56530

(Slide Compound Saw / Miter Saw)   

190 20 - 2 1.4 60 -5 TCG Aluminum - 1 B-03997
255 15.88 25 2.3 1.8 80 -5 TCG Aluminum - 1 B-04195
255 25.4 25 2.3 1.8 100 -5 TCG Aluminum - 1 B-04204
255 25.4 25 2.6 2 100 0 ATB Aluminum - 1 A-81614
255 25.4 25 2.6 2 120 0 ATB Aluminum - 1 A-81620
305 25.4 25 2.3 1.8 80 -5 TCG Aluminum - 1 B-04210
305 25.4 - 2.4 1.8 100 5 FTG Aluminum - 1 B-02820
305 25.4 25 2.3 1.8 100 -5 TCG Aluminum - 1 B-04226
355 25 - 3 2.2 80 5 TCG Aluminum - 1 A-02602

for metal
Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Cordless Metal Cutter)

136 20 - 1.5 1.2 30 0 MTCG Mild steel - 1 B-07319
136 20 - 1.4 1.1 50 -15 ATB Thin sheet metal - 1 B-07325
136 20 - 1.1 0.95 56 0 SMTCG Stainless/Mild steel Laser Slit 1 B-23117
150 20 - 1.5 1.2 32 0 MTCG Mild steel - 1 B-46296
150 20 - 1.4 1.1 52 -15 ATB Thin sheet metal - 1 B-47008
150 20 - 1.1 0.95 32 10 TCG Thick metal Laser Slit 1 B-68292
150 20 - 1.1 0.95 60 0 SMTCG Stainless/Mild steel Laser Slit 1 B-47014

(Metal Cutter)   
185 20 - 1.9 1.5 36 0 ATB Mild steel - 1 B-04628
185 20 - 2 1.6 38 0 MTCG Mild steel - 1 A-85438
185 20 - 2 1.6 48 0 MTCG Thin mild steel - 1 A-83967
185 20 - 1.7 1.3 70 -10 FTG Corrugated steel plate - 1 A-86446
185 20 - 1.85 1.5 48 0 SMTCG Mild steel Long Life 1 B-23357
185 20 - 1.8 1.5 56 0 SMTCG Thin mild steel Long Life 1 B-23391
185 20 - 1.6 1.3 64 0 SMTCG Stainless/Mild steel Laser Slit 1 B-31697

(Metal Cutting Saw)   

305 25.4 - 2.1 1.7 60 0 TCG Mild steel - 1 A-87242
305 25.4 - 2.4 2 60 0 TCG Mild steel Laser Slit 1 A-86723
305 25.4 - 2.5 2.2 60 0 TCG Mild steel - 1 A-81860
305 25.4 - 2.3 2 78 0 MTCG Thin mild steel - 1 A-87127
305 25.4 - 1.95 1.65 100 -3 SMTCG Stainless/Mild steel Laser Slit 1 B-23151
for Wood

Outer dia Bore Ring Kerf Plate No. of

Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth

Economy (Circular Saw)   

110 20 - 1.7 1.1 12 15 ATB Wood - 1 *D-15562
110 20 - 1.7 1.1 24 10 ATB Wood - 1 *D-15578
160 20 15.88 2 1.3 16 20 ATB Wood - 1 *D-16433
160 20 15.88 2 1.3 24 20 ATB Wood - 1 *D-34257
160 20 15.88 2 1.3 40 20 ATB Wood - 1 *D-34263
165 20 - 2 1.3 10 20 ATB Wood - 1 *D-03327
165 20 - 2 1.3 16 20 ATB Wood - 1 *D-09628
165 20 - 2 1.3 24 20 ATB Wood - 1 *D-03333
165 20 - 2 1.3 40 18 ATB Wood - 1 *D-03349
185 30 20/15.88 2 1.3 16 20 ATB Wood - 1 *D-03903
185 30 20/15.88 2 1.3 20 20 ATB Wood - 1 *D-09634
185 20 - 2 1.3 24 20 ATB Wood - 1 *D-03355
185 20 - 1.8 1.2 24 20 ATB Wood - 1 *D-19037
185 20 - 2 1.3 40 18 ATB Wood - 1 *D-03361
185 30 20/15.88 2 1.3 40 18 ATB Wood - 1 *D-03919
195 25.4 16/20 2 1.3 80 10 ATB Wood - 1 *D-16396
210 25 - 2 1.3 24 20 ATB Wood - 1 *D-29066
210 30 - 2 1.3 24 20 ATB Wood - 1 *D-29050
210 25 - 2 1.3 40 18 ATB Wood - 1 *D-34300
235 25 - 2.4 1.6 20 20 ATB Wood - 1 *D-15811
235 30 25.4/25 2.4 1.6 20 20 ATB Wood - 1 *D-03925
235 25 - 2.4 1.6 40 18 ATB Wood - 1 *D-16570
235 25.4 25 2.4 1.6 40 18 ATB Wood - 1 *D-03377
235 30 25 2.4 1.6 48 18 ATB Wood - 1 *D-03931
235 25 - 2.4 1.6 60 15 ATB Wood - 1 *D-34322
235 30 25 2.4 1.6 60 15 ATB Wood - 1 *D-09640

Economy (Slide Compound Saw / Miter Saw)   

255 30 25.4 2.6 1.8 80 12 ATB Wood  - 1 *D-34388
260 25.4 15.88 2.6 1.8 100 12 ATB Wood  - 1 *D-34394
305 25.4 - 3.2 2 100 15 ATB Wood  - 1 *D-34403

(Circular Saw)   
185 20 15.88 2.4 1.6 60 12 TCG Wood/MDF - 1 D-21381
185 30 20/15.88 2.4 1.5 60 12 TCG Wood/MDF - 1 *D-17902
185 30 20/15.88 2.4 1.5 60 12 ATB Wood/MDF - 1 *D-38934
235 30 25 2.8 1.8 80 12 TCG Wood/MDF - 1 *D-17918

(Slide Compound Saw / Miter Saw)   

255 30 15.88 3.2 2.4 100 10 TCG Wood/MDF - 1 *D-19071
255 30 15.88 3 2 100 12 ATB Wood/MDF - 1 *D-38940
255 25.4 - 2.6 1.8 84 -5 TCG MDF - 1 D-62452
305 30 15.88 3.2 2.4 120 10 TCG Wood/MDF - 1 *D-19087
305 30 15.88 3.2 2.2 120 12 ATB Wood/MDF - 1 *D-38956
305 25.4 - 3.2 2.2 96 -5 TCG MDF - 1 D-62468
for Alminium
Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

Economy (Slide Compound Saw / Miter Saw)

260 25.4 - 3 2 70 5 TCG Aluminum - 1 *D-03408
260 30 15.88 3 2 70 5 TCG Aluminum - 1 *D-03969
260 25.4 - 3 2 100 5 TCG Aluminum - 1 *D-03414
260 30 15.88 3 2 100 5 TCG Aluminum - 1 *D-03975
305 30 15.88 3 2.2 80 5 TCG Aluminum - 1 *D-16520
305 25.4 15.88 3 2.2 100 5 TCG Aluminum - 1 *D-34419
355 30 25 3.3 2.35 120 8 TCG Aluminum - 1 *D-16592

for Wood

Outer dia Bore Ring Kerf Plate No. of

Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) (mm) teeth

Economy (Circular Saw)   

165 20 - 2 1.2 16 12 ATB Wood - 1 D-50485
165 20 - 2 1.2 24 12 ATB Wood - 1 D-50491
165 20 - 2 1.2 40 12 ATB Wood - 1 D-50500
185 25.4 20 2.2 1.4 16 18 ATB Wood - 1 D-50516
185 25.4 20 2.2 1.4 24 15 ATB Wood - 1 D-50522
185 25.4 20 2.2 1.4 24 15 ATB Wood - 1 D-50522-10
185 25.4 20 2.2 1.4 40 14 ATB Wood - 1 D-50538
235 25.4 25 2.5 1.6 20 14 ATB Wood - 1 D-50544
235 25.4 25 2.5 1.6 40 12 ATB Wood - 1 D-50550
235 25.4 25 2.5 1.6 40 12 ATB Wood - 1 D-50566

Economy (Slide Compound Saw / Miter Saw)   

260 25.4 - 2.6 1.8 40 12 ATB Wood - 1 D-65414
260 25.4 - 2.6 1.8 60 12 ATB Wood - 1 D-65420
260 25.4 - 2.6 1.8 80 12 ATB Wood - 1 D-65436
260 25.4 - 2.6 1.8 100 12 ATB Wood - 1 D-65442

for MDF
Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Circular Saw)   
165 20 15.88 2.2 1.4 52 -5 TCG MDF  - 1 D-62474
185 20 20/15.88 2.2 1.4 60 -5 TCG MDF  - 1 D-61466
Outer dia Bore Ring Plate No. of
Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth

(Slide Compound Saw / Miter Saw)   

255 30 25.4 3 2 100 12 ATB Wood/MDF - 1 D-57130
255 25.4 - 2.8 1.8 84 10 TCG MDF - 1 D-62480
305 25.4 - 3 2 96 10 TCG MDF - 1 D-62496

for Multi-purpose (wood,MDF,aluminum,PVC)

(Circular Saw)
Outer dia Bore Kerf Plate No. of
Ring (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth
160 30 15.88/16/19/20 2.2 1.4 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63600
165 30 15.88/16/19/20 2.2 1.4 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63616
185 30 15.88/16/20 2.2 1.4 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63622
190 30 15.88/16/20 2.2 1.4 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63638
210 30 16/20/25/25.4 2.4 1.6 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63644
216 30 16/20/25/25.4 2.4 1.6 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63650
216 30 16/20/25/25.4 2.4 1.6 80 5 TCG wood,MDF,aluminum,PVC - 1 D-63878
235 30 16/20/25/25.4 2.4 1.6 60 5 TCG wood,MDF,aluminum,PVC - 1 D-63557

(Slide Compound Saw / Miter Saw)   

260 30 16/20/25/25.4 2.6 1.8 80 5 TCG wood,MDF,aluminum,PVC - 1 D-63563
260 30 16/20/25/25.4 2.6 1.8 100 5 TCG wood,MDF,aluminum,PVC - 1 D-62234
260 30 16/20/25/25.4 2.6 1.8 120 5 TCG wood,MDF,aluminum,PVC - 1 D-62240
305 30 16/20/25/25.4 2.8 2.0 80 5 TCG wood,MDF,aluminum,PVC - 1 D-63579
305 30 16/20/25/25.4 2.8 2.0 100 5 TCG wood,MDF,aluminum,PVC - 1 D-63585
305 30 16/20/25/25.4 2.8 2.0 120 5 TCG wood,MDF,aluminum,PVC - 1 D-63591
355 30 16/20/25/25.4 3.0 2.2 100 5 TCG wood,MDF,aluminum,PVC - 1 D-63884

Specialized for CA5000

Outer dia Bore Ring Plate No. of

Kerf (mm) Rake Tooth shape Material Note Per pkg Part No.
(mm) (mm) (mm) (mm) teeth
118 20 - 14 6 6 5 90° Aluminium composite - 1 B-48832
118 20 - 18 6 6 5 135° Aluminium composite - 1 B-48860
ACCESSORIES
Jigsaw / Reciprosawing

Tungsten carbide tipped Diamond grit Grit size Straight cutting

Curved cutting Fine cut Coarse cut Thick material

Thin material Ground teeth Number of teeth per inch Do not use orbital mode

Use coolant, cool

106 Accessories 107

Jig Saw blade

(Wood/Metal)
(Wood/Metal)

Drilling
Drilling

Teeth Type
Milled and side set teeth Ground and side set teeth

(Masonry)
(Masonry)

Drilling
Drilling

Fastening
Fastening

Screw Bit Sets

Screw Bit Sets

Drill and
Drill and

Milled and wavy set teeth Ground and taper ground teeth

Cutting
Cutting

Reciprosawing
Reciprosawing

Jigsaw /
Jigsaw /

Teeth manufacture

Brushing
Brushing

Milled teeth Ground teeth

• Low cost type of • Costly type of manu-
manufacturing facturing

Bonded Abrasive
Bonded Abrasive

• For general cutting • Very sharp!

• Soft to hard materials • Accurate, clean cut
• Long blade life • Soft to medium hard

Coated Abrasive
Coated Abrasive

materials

Production method
• Side set: each individual tooth is alternately Side set Wavy set Ground
bent to the left and to the right. Raker setting
Multi Tool
Multi Tool

Example: right, left, straight, etc.

• Wavy set: row of teeth receives a wave shape

• Ground: blade body tapers to the rear (conical)
Diamond
Diamond

Jig Saw Blade material

• HCS (High Carbon Steel) for cutting softer materials such as wood or plastics.
Routering
Planing /

• HSS (High Speed Steel) for cutting harder materials such as metals.

• BiM (Bi-metal, HCS base and HSS teeth)

for cutting soft materials to hard materials such as wood, metal, plastics.
OPE

• TC (Tungsten Carbide) for cutting glass fiber reinforced plastic, cement-bonded fiberboards or plasterboard.
Miscellaneous
Makita type Jig Saw blade
For Model:
4300BA/BV, 4326M, 4327M

Plywood (mm)

Stainless Steel

Tooth Per Inch

Plastics (mm)

Length (mm)
Aluminum

Mild Steel

Mate rial
Working

Type of
cutting
Wood

(mm)

(mm)

(mm)
Per
Shape No. Features / Application Part No.
pkg.

Wood/ Basic            
2 A-86533
3 3-50 3-50 - - - For general cutting 60 9 HCS
5 A-85868
2 792212-6
16 3-50 3-50 - - - For scroll cutting 60 9 HCS
5 A-85830
Wood/ Fast            
2 792267-1
8 4-50 4-50 - - - For fast cutting 60 8 HCS
5 A-85911
Wood/ Finish
2 792325-3
9 4-50 4-50 - - - For fast finish work 60 8 HCS
5 A-85927
For fast finish work, 2 792326-1
10 4-50 4-50 - - - especially suitable for 60 9 HCS
plywood 5 A-85818

Splinter-free cuts in wood, 2 A-86555

10S 3-50 - - - - 62 13 HCS
requiring no sanding 5 A-85824
Splinter-free cuts in wood
BR-3 4-50 - - - - 60 9 HCS 5 A-85933
requiring no sanding
Hardwood / Decorative veneers            
2 A-86527
2 3-50 3-50 2-6 - 2-6 For decorative veneers. 60 14 HSS
5 A-85852
For hardwood, thick mild 2 A-86549
4 3-50 3-50 3-6 - 3-6 steel plate and tough 60 9 HSS
plastics 5 A-85874

Ideal for scroll cutting of 2 792215-0

17 2-50 2-50 2-6 - 2-6 63 14 HSS
decorative veneer 5 A-85846
Finish for decorative veneers
Reverse tooth for splinter-
41 3-50 3-50 - - - free cuts. for tough plastic 60 12 HCS 5 A-85880
and decorative veneers

42 2-50 2-50 - - - For decorative veneer 60 16 HSS 5 A-85896

Metal/ Basic
For mild steel. Also 2 A-86511
1 - 1-6 1-3 0.5-3 1-3 suitable for corrugated 60 24 HSS
plastics and tough plastics 5 A-85802
2 792131-6
5 - 1.5-6 1-6 - 1-3 For mild steel 42 24 HSS
5 A-85905
Bayonet type Jig Saw blade
For Model:
DJV181, DJV182, DJV180, JV183D, JV143D, JV0600, JV100D, J V101D, JV102D, J V103D, JV141D, J V142D
DJR185, JR102D, JR105D, 4326, 4327, 4328, 4329, 4350T/CT/FCT, 4351T/CT/FCT

Aluminum (mm)

Working Length
Mild Steel (mm)
Wood Plywood

Type of cutting
Stainless Steel

Tooth Per Inch

Plastics (mm)

Mate rial
(mm)

(mm)

(mm)
Per
Shape No. Features / Application Part No.
pkg.

Super Express Jig saw Blade             

For fast finish work in wood 8.5-
B-50 5-50 5-50 - - - 77 HCS 5 B-06460
and plastic 10.6
Fast cut for mild steel, stainless 9.8-
B-51 - - - 1-3 1-8 77 HSS 5 B-06476
steel 18.1
5.5-
B-52 5-50 5-50 3-35 3-5 3-8 Fast cut for universal materials 77 HSS 5 B-06482
9.8
Wood/ Basic
2 B-01286
B-13 4-65 4-65 - - - For general cutting 70 8 HCS
5 A-85656

B-15 3-35 3-35 - - - Ideal for cutting thin materials 50 12 HCS 5 A-85678

B-14 2-35 2-35 - - - Ideal for cutting thin materials 50 18 HCS 5 A-85662

B-18 2-35 2-35 - - - For scroll cutting 45 14 HCS 5 A-85709

Wood/ Fast

58 4-65 4-65 - - - For fast cutting 75 8 HCS 5 A-86577

2 B-01292
B-16 5-65 5-65 - - - For fast and rough cutting 75 6 HCS
5 A-85684

L-2 5-90 5-90 - - - For fast and rough cutting 100 6 HCS 5 A-86309

5- 5-
B-16L - - - For fast and rough cutting 150 6 HCS 5 792726-5
135 135
2 B-01301
B-17 5-60 5-60 - - - For fast and scroll cutting 70 6 HCS
5 A-85690

B-8 4-65 4-65 - - - Hook angle: 2 degrees 75 8 HCS 5 A-85232

Wood/ Finish

59 4-65 4-65 - - - For fast finish work 75 8 HCS 5 A-86583

For fast finish work, especially

B-10 3-65 3-65 - - - 75 9 HCS 5 A-85628
suitable for plywood

For fast finish work in wood 2 B-01270

B-11 3-60 3-60 - - - 75 9 HCS
and plastics 5 A-85634
Splinter-free cuts in wood
B-10S 3-50 - - - - 65 13 HCS 5 792691-8
requiring no sanding
For fast finish work in wood
B-12 5-65 5-65 - - - 75 6 HCS 5 A-85640
and plastics
Ideal for cutting thick
L-1 5-90 5-90 - - - 100 6 HCS 5 A-86290
materials

B-29 2-35 2-35 - - - For scroll cutting 42 16 HCS 5 A-80400

Splinter-free cuts in wood,

BR-13 5-65 - - - - 64 9 HCS 5 A-85793
requiring no sanding

Hardwood / Decorative veneers             

For hardwood, thick mild steel 2 B-01345

B-25 3-60 3-60 3-6 - 3-6 75 9 HSS
plate and hard plastics. 5 A-85765
For scroll cutting in 2 B-01351
B-26 3-60 3-60 3-10 - 3-10 hardwoods and for hard 70 9 HSS
plastics. 5 A-85771

            
 Aluminum (mm)

Working Length
Mild Steel (mm)
Wood Plywood

Type of cutting
Stainless Steel

Tooth Per Inch

Plastics (mm)

Mate rial
(mm)

(mm)

(mm)
Per
Shape No. Features / Application Part No.
pkg.

Finish for decorative veneers

Reverse tooth for splinter-free
B-19 3-50 3-50 - - - cuts. For tough plastics and 65 12 HCS 5 A-85715
decorative veneers

B-28 2-50 2-50 - - - For decorative veneers 63 16 HSS 5 A-80391

Laminates, Hard wood and Bi-

B-53 1.5-15 1.5-15 - - - 60 15 5 B-10970
Laminated panels Metal
Laminates, Hard wood and Bi-
B-54 1.5-15 1.5-15 - - - 60 18 5 B-10986
Laminated panels Metal

Laminates, Hard wood and Bi-

B-55 1.5-30 1.5-30 - - - 75 15 5 B-31887
Laminated panels Metal
Metal/ Basic

51 - 1.5-6 1.5-6 1-3 1-3 For mild steel 65 24 HSS 5 A-86561

For mild steel, tough plastics. 2 B-01323

B-22 - 1-6 1-3 1-3 1-3 50 24 HSS
Espessialy for thin metal plate 5 A-85737

B-24 - 1-3 1-2 0.5-2 0.5-2 For very thin metal plate 50 32 HSS 5 A-85759

For decorative veneers, 2 B-01339

B-23 3-35 3-35 2-6 - 2-6 50 14 HSS
medium-thick metal plate 5 A-85743
2 B-01367
B-27 - 1-6 1-3 1-3 1-3 For scroll cutting in mild steel 50 24 HSS
5 A-85787
For thin metal plate, pipes and
B-32 - - Ø65 - Ø65 - 1.5-3 profiles. Also Aluminum and 107 18 HSS 5 B-10431
plastics.
For midium-thick metal plate,
B-33 - - Ø65 - Ø65 - 2-3 pipes and profiles. Also 107 14 HSS 5 B-10447
Aluminum
For mild steel, tough plastics.
B-34 - 1.5-6 1.5-3 1.5-3 1.5-3 50 18 HSS 5 B-10453
Especially for thin metal plate
For sandwich materials Bi-
B-35 * - Ø114 2-6 - - 154 14 5 B-10469
* Wood with nails -ø120 Metal
For Plastics
2 B-01317
B-21 - 3-60 1-10 - - For plastics finish work 75 12 HSS
5 A-85721
For Rubber
Ideal for cutting of paper, cork,
B-K - - - - - 75 - HCS - 5 A-80416
rubber, leather
For Fiber Cement
Fiber Cement/Plaster Board 5-
B-60 - - - - - 75 6 TC/HM - 3 B-06890
50, FRP/Plastic 5-20
Fiber Cement/Plaster Board 5-
B-61 - - - - - 105 6 TC/HM - 3 B-06909
80, FRP/Plastic 5-50

Economy type Jig Saw blade

For Model:
DJV181, DJV182, DJV180, JV183D, JV0600, JV100D, J V101D,JV102D, JV103D, JV141D, J V142D
DJR185, JR102D, JR105D, 4326, 4327, 4328, 4329, 4350T/CT/FCT, 4351T/CT/FCT
Plywood (mm)

Stainless Steel
Plastics (mm)

Aluminum

Mild Steel

Working
Wood

(mm)

(mm)

(mm)

Tooth Per Type of Per

Shape Features / Application Length Mate rial Part No.
Inch cutting pkg.
(mm)

4-50 - - - - Wood / Basic 74 8 HCS 5 D-34877

4-50 - - - - Wood / Fast 74 6 HCS 5 D-34883

4-50 - - - - Wood / Fast, Curved 74 6 HCS 5 D-34899

- - - - 1-3 Metal / Basic 51 21 HSS 5 D-34908

4-50 - - - - Wood / Finish 74 9 HCS 5 D-44214

Jig Saw Blade 100pc/ pack
Type No. Application Part No.
B-22 Metal B-07733
B-23 Metal B-07749
No.51 Metal B-07836
B-25 Wood B-07755
BR-13 Wood B-07777
B-10 Wood B-07674
B-11 Wood B-07680
Bayonet type B-12 Wood B-07696
B-13 Wood B-07705 Type No. Application Part No.
B-16 Wood B-07711 No.1 Metal B-07783
B-18 Wood B-07727 No.2 Wood B-07799
B-29 Wood B-07761 No.3 Wood B-07808
Makita type
No.58 Wood B-07842 No.8 Wood B-07814
No.59 Wood B-07858 No.10 Wood B-07820

Jig Saw blade plastic case assortment

There are total 6 ditches for Jigsaw Blade on the center plate.
You can put approx. 6 to 7 Jigsaw Blades in a ditch.
<Case Size>
Length Wide Height
47mm x 170mm x 27.5mm
Aluminum (mm)

Working Length
Mild Steel (mm)
Wood Plywood

Type of cutting
Stainless Steel

Tooth Per Inch

Plastics (mm)

Mate rial
(mm)

(mm)

(mm)
Per
Shape No. Features / Application Part No.
pkg.

Jig Saw blade set A 5 items (total 10pcs / set)

B-13 4-65 4-65 - - - For general cutting 70 8 HCS 2

B-16 5-65 5-65 - - - For fast and rough cutting 75 6 HCS 2

B- Splinter-free cuts in wood

3-50 - - - - 65 13 HCS 2 B-44410
10S requiring no sanding
For mild steel, tough plastics.
B-22 - 1-6 1-3 1-3 1-3 50 24 HSS 2
Espessialy for thin metal plate

For decorative veneers, medium-

B-23 3-35 3-35 2-6 - 2-6 50 14 HSS 2
thick metal plate
Jig Saw blade set B 4 items (total 10pcs / set)
For fast finish work in wood and 8.5
B-50 5-50 5-50 - - - 77 HCS 4
plastic -10.6

Fast cut for mild steel, stainless 9.8

B-51 - - - 1-3 1-8 77 HSS 2
steel -18.1
B-44426
5.5
B-52 5-50 5-50 3-35 3-5 3-8 Fast cut for universal materials 77 HSS 2
-9.8
1.5- 1.5- Laminates, Hard wood and Bi-
B-53 - - - 60 15 2
15 15 laminated panels Metal

Jig Saw blade set B 4 items (total 5pcs / set)

For fast finish work in wood and 8.5
B-50 5-50 5-50 - - - 77 HCS 2
plastic -0.6

Fast cut for mild steel, stainless 9.8

B-51 - - - 1-3 1-8 77 HSS 1
steel -8.1
B-48527
5.5
B-52 5-50 5-50 3-35 3-5 3-8 Fast cut for universal materials 77 HSS 1
-9.8

1.5- 1.5- Laminates, Hard wood and Bi-

B-53 - - - 60 15 1
15 15 laminated panels Metal
Jig Saw blade assortment
*Super Express Jig saw blade

Five different jig saw

Type Part No.
blades in one packet
Makita type No.1 No.2 No.3 No.8 No.10S A-86882

B type B-10S B-13 B-16 B-22 B-23 A-86898

B type B-50 B-51 B-52 - - *B-06292

Recipro saw blades for Model JR1000FT, JR102D

For Grinding
Overall Working
Shape Description Application Per pkg. Part No.
Length (mm) Length (mm)
Sanding adapter
Wood 153 90 1 A-40967
(Use with Abrasive paper)

Abrasive paper #60

Wood - 95x22 10 B-04977
(Use with Sanding adapter)

Abrasive paper #120

Wood - 95x22 10 B-04983
(Use with Sanding adapter)

File (Round Type) Metal 153 60 3 A-40945

File (Flat Type) Metal 153 60 3 A-40951

Recipro saw blades for Model JR1000FT, JR102D

HCS / High carbon steel for cutting softer materials such as wood or plastics HSS / High speed steel for cutting harder materials such as metals,Aluminum,and non-metals
For Cutting
Steel (mm)
Aluminum

Mild Steel

Tooth Per
Stainless

Mate rial
Plywood

Working

Per pkg.
Plastics

Type of
cutting
Length
Wood

(mm)

(mm)

(mm)

(mm)

(mm)

Inch
Shape No. Features / Application Part No.

Wood/ Fast
Ideal for fast cutting of wood
B-8 4-65 4-65 - - - and plastics.Hook 75 8 HCS 5 A-85232
angle:2degrees
Wood/ Finish
For fast finish work,
B-10 3-65 3-65 - - - 75 9 HCS 5 A-85628
especially in plywood.
Finish for decorative veneers
Reverse tooth for splinter-free
cuts.
B-19 3-50 3-50 - - - 65 12 HCS 5 A-85715
For tough plastics and
decorative veneers

B-19S 3-25 3-25 - - - Short type of B-19 43 12 HCS 5 B-04933

Metal/ Basic
For mild steel, tough plastics.
B-22 - 1-6 1-3 1-3 1-3 50 24 HSS 2 B-01323
Espessialy for thin metal plate

B-22S - 1-6 1-3 1-3 1-3 Short type of B-22 32 24 HSS 5 B-04949

Metal/ Thin cutting

B-24 - 1-3 1-2 0.5-2 0.5-2 For very thin metal plate 50 32 HSS 5 A-85759

B-24S - 1-3 1-2 0.5-2 0.5-2 Short type of B-24 32 32 HSS 5 B-04955

B-30 - 1-6 1-3 1-3 1-3 For mild steel. angle: 2degrees 50 24 HSS 5 B-04961

For Paper, Cork, Rubber, Leather

Length (mm)
polystyrene

Card board

Tooth Per

Mate rial
Working

Per pkg.
Leather
Rubber

Type of
cutting
Foam

Inch

Shape No. - Features / Application Part No.

Ideal for cutting of paper,

B-K 50 30 10 5 - 75 - HCS  5 A-80416
cork, rubber and leather.
Recipro saw blade
Teeth Overall Blade
Per
Type per length thickness Application Tooth Material Part No.
pkg.
inch (mm) (mm)
Super Express Recipro saw Blade
2 B-05038-2
Fast cut for metal
7-18 152 0.9 Bi-Metal 5 B-05038
(Iron/steel 1.5-8.0mm, Plastic 5-77mm)
25 B-05038-25
Fast cut for non-ferrous metal, aluminum, 2 B-05044-2
6-11 152 0.9 plastics, wood with nail, steel (Iron/steel 5- Bi-Metal 5 B-05044
8mm, Plastic 5-77mm, Wood 5-77mm) 25 B-05044-25
2 B-05153-2
6-10 203 1.0 Fast cut for wood HCS 5 B-05153
25 B-05153-25
For Metal / Basic
For steel plate 1.5mm-3.0 mm.
No.21 24 125 1.0 HSS 5 792146-3
For iron pipe 50 mm dia. or less.

For steel plate, aluminum 3.0mm-5.0mm.

No.22 18 165 1.0 HSS 5 792147-1
For iron pipe 90 mm dia. or less.

For steel plate 1.5mm-3.0 mm.

No.24 24 165 1.0 HSS 5 792149-7
For iron pipe 90 mm dia. or less.

14 100 0.9 For thick metal 3-8mm Bi-Metal 5 B-20410

2 B-16841-2
metal plate 3-8mm
 14 152 0.9 Bi-Metal 5 B-16841
pipe 10-100mm
25 B-16841-25
2 B-16776-2
metal plate 3-8mm
 14 225 0.9 Bi-Metal 5 B-16776
pipe 10-175mm
25 B-16776-25

18 100 0.9 For thin metal 1.5-4.0mm. Bi-Metal 5 B-20404

2 B-05169-2
For thin metal 1.5-4.0mm.
18 152 0.9 Bi-Metal 5 B-05169
For iron pipe 100mm dia or less.
25 B-05169-25
2 B-16782-2
metal plate 1.5-4mm
 18 225 0.9 Bi-Metal 5 B-16782
pipe 5-175mm
25 B-16782-25

 24 100 0.9 For thin metal 0.7-3.0mm. Bi-Metal 5 B-20395

metal plate 0.7-3mm 2 B-16835-2

 24 152 0.9 Bi-Metal
pipe 5-100mm 5 B-16835

metal plate 0.7-3mm 2 B-43169-2

 24 225 0.9 Bi-Metal
pipe 5-175mm 5 B-43169

metal tubing 5-200mm, Aluminum & plastic 2 B-16857-2

 10-14 305 0.9 Bi-Metal
5-20mm 5 B-16857
For Metal / Heavy     


14+18 152 1.1 metal plate 3-8mm, pipe <100mm Bi-Metal 5 B-43131

14+18 225 1.1 metal plate 3-8mm, pipe <175mm Bi-Metal 5 B-43175

14+18 305 1.1 metal plate 3-8mm, pipe <250mm Bi-Metal 5 B-43206

thick sheet metal 4-12mm, pipe <100mm

8+10 152 1.1 Bi-Metal 5 B-43147
(fast cut)

thick sheet metal 4-12mm, pipe <175mm 2 B-43181-2

 8+10 225 1.1 Bi-Metal
(fast cut) 5 B-43181
thick sheet metal 4-12mm, pipe <250mm 2 B-43212-2
 8+10 305 1.1 Bi-Metal
(fast cut) 5 B-43212

thick sheet metal 2-10mm, pipe <100mm

10-14 152 1.25 Bi-Metal 5 B-43153
(fine cut)

thick sheet metal 2-10mm, pipe <175mm 2 B-43197-2

10-14 225 1.25 Bi-Metal
(fine cut) 5 B-43197

thick sheet metal 2-10mm, pipe <250mm

10-14 305 1.25 Bi-Metal 5 B-43228
(fine cut)
 Teeth Overall Blade
Per
Type per length thickness Application Tooth Material Part No.
pkg.
inch (mm) (mm)
For Metal / Heavy / Curve shape       

14+18 152 1.1 metal plate 3-8mm, pipe <100mm Bi-Metal 5 B-55815

14+18 225 1.1 metal plate 3-8mm, pipe <175mm Bi-Metal 5 B-55821

14+18 305 1.1 metal plate 3-8mm, pipe <225mm Bi-Metal 5 B-55837

For Metal / Heavy / TC

8 100 1.25 thick sheet metal 4-12mm, pipe <50mm TC/HM 1 B-55566

1 B-55572
8 152 1.25 thick sheet metal 4-12mm, pipe <100mm TC/HM
10 B-55572-10
1 B-55588
8 228 1.25 thick sheet metal 4-12mm, pipe <175mm TC/HM
10 B-55588-10
1 B-55594
8 305 1.25 thick sheet metal 4-12mm, pipe <250mm TC/HM
10 B-55594-10
For Wood / Basic
soft wood, chipboard, wood core plywood
3 152 1.25 HCS 5 B-16813
<100mm

5 305 1.5 pruning green wood <250mm HCS 5 B-16863

soft wood, chipboard, wood core plywood

6 152 1.25 HCS 5 B-16798
<100mm
soft wood, chipboard, wood core plywood 2 B-16829-2
6 305 1.25 HCS
<250mm 5 B-16829

9 165 1.0 For wood 5mm-90 mm. HCS 5 792148-9

10 150 1.0 For wood, plywood 5mm-90mm HCS 5 A-02319

soft wood, chipboard, wood core plywood

10 152 0.8 HCS 5 B-16807
<100mm

No.3023 10 250 1.25 For thick wood 5mm-190mm HCS 5 B-00767

For Wood / Fast     

6 150 1.0 For fast finish work in wood 10mm-90mm HCS 5 792707-9

For fast and rough cutting in thick wood.

4 150 1.0 HCS 5 A-02303
20mm-90mm
For roughing work on thick wood. 10mm-
6 300 1.25 HCS 5 B-03030
250mm
for Wood / Clean cut   
For planting green wood < φ140mm,
8.5 225 0.9 Bi-Metal 1 B-57386
wood < 140mm
For bamboo < φ140mm, wood < 140mm,
15 225 0.9 Bi-Metal 1 B-57392
PVC <φ140mm
For planting green wood < φ160mm,
8.5 250 1.0 HCS 1 B-62016
wood < 160mm
for Wood and Metal
*White Lacquered, **Unlacquered     

6 100 0.9 For wood with nails 10.0mm-50.0mm, Bi-Metal 5 B-20432

For wood with nails 10mm-100mm,

6 152 1.25 Bi-Metal 5 B-05175
Glass Fiber 8-50mm
For sheet metal 3.0-12.0mm,
10 100 0.9 Bi-Metal 5 B-20426
wood 10.0-50.0mm
5 B-31843
For pallets, wood with nails 5-100mm
10 152 0.9 Bi-Metal 200 *B-54259
sheet metal, pipes, aluminum profiles 3-12mm
200 **B-54265
5 B-31859
For pallets, wood with nails 5-175mm
10 228 0.9 Bi-Metal 200 B-54271
sheet metal, pipes, aluminum profiles 3-12mm
200 **B-54287
Wood with nails/metal, chipboards (10-250mm),
5-8 305 1.25 aerated concrete (10-250mm), plastics/Glass fibre Bi-Metal 3 B-10637
reinforced plastics, profiles (5-60mm)
wood with metal 5-100mm, aluminum 3-
10-14 152 0.9 Bi-Metal 5 B-43240
10mm, plastic 3-100mm
wood with metal 5-175mm, aluminum 3-
10-14 225 0.9 Bi-Metal 5 B-43262
10mm, plastic 3-175mm
 Teeth Overall Blade
Per
Type per length thickness Application Tooth Material Part No.
pkg.
inch (mm) (mm)
For thick metal 3.0-8.0mm,
14-18 100 0.9 Bi-Metal 5 B-20454
wood 10.0-50.0mm
For Wood and Metal / Heavy       

5-8 152 1.6 wood with metal, chipboard 10-100mm Bi-Metal 5 B-43234

2 B-43256-2
5-8 225 1.6 wood with metal, chipboard 10-175mm Bi-Metal
5 B-43256
2 B-43278-2
5-8 305 1.6 wood with metal, chipboard 10-235mm Bi-Metal
5 B-43278
Wood with nails/metal, chipboards (5-100mm), 1 B-49834
6-8 152 1.25 TC/HM
plastics/Glass fibre reinforced plastics (<100mm) 10 B-49834-10
Wood with nails/metal, chipboards (5-175mm), 1 B-49840
6-8 228 1.25 TC/HM
plastics/Glass fibre reinforced plastics (<175mm) 10 B-49840-10
Wood with nails/metal, chipboards (5-250mm), 1 B-49840
6-8 305 1.25 TC/HM
plastics/Glass fibre reinforced plastics (<250mm) 10 B-49856-10
For Special Purpose     
Insulation Material,
- 225 1.5 HCS 2 B-52118
Glass Wool, Stone Wool (10-175mm)
Insulation Material,
- 300 1.5 HCS 2 B-52124
Glass Wool, Stone Wool (10-250mm)
Insulation Material,
- 400 1.5 HCS 1 B-52130
Glass Wool, Stone Wool (10-300mm)

For stainless steel plate 2mm-4mm,

18 152 1.0 TC/HM 2 B-07250
stainless steel pipe 80mm dia or less, fiber glass
For stainless steel plate 2mm-4mm,
18 203 1.0 TC/HM 2 B-51312
stainless steel pipe 150mm dia or less, fiber glass
Aerated Concrete / Soft Brick
2 240 1.5 TC/HM 1 B-12809
< 150mm
Aerated Concrete / Soft Brick
2 305 1.5 TC/HM 1 B-10394
< 215mm
Aerated Concrete / Soft Brick
2 455 1.5 TC/HM 1 B-10403
< 365mm

Aerated Concrete / Soft Brick 10-250mm

3 305 1.5 TC/HM 2 B-63585
epoxy 6-150mm
Aerated Concrete / Soft Brick 20-350mm
2 400 1.5 TC/HM 2 B-63591
epoxy 6-150mm
Cast-steel pipe 150mm dia or less, for red
- 228 1.0 Diamond Grit 2 B-31871
brick 10-175mm, FRP/Epoxy 3-175mm
For Ice/Frozen Material     

3 305 1.25 For Ice 10-250 mm Stainless Steel 1 B-10609

6 152 1.2 For Ice 10-80 mm Stainless Steel 1 B-52043

6 228 1.2 For Ice 10-175 mm Stainless Steel 1 B-30564

6 305 1.2 For Ice 10-250 mm Stainless Steel 1 B-23248

10 228 1.2 For Ice 10-175 mm Stainless Steel 1 B-30570

10 305 1.2 For Ice 10-250 mm Stainless Steel 1 B-23254

For Plasterboards

6 100 0.9 For plasterboard 5.0-50.0mm Bi-Metal 5 B-20448

For Rescue
Wood with nails/metal, chipboards (5-100mm),
6-8 152 1.25 TC/HM 1 B-67206
plastics/Glass fibre reinforced plastics (<100mm)
Wood with nails/metal, chipboards (5-175mm),
6-8 228 1.25 TC/HM 1 B-67212
plastics/Glass fibre reinforced plastics (<175mm)

For Model: DJR185, DJR183, DJR145, JR100D, JR103D, JR105D

for Wood / Clean cut
For planting green wood < φ100mm,
8.5 190 0.6 HCS 1 B-56580
wood < 100mm
 For bamboo < φ100mm, wood < 100mm,
15 190 0.6 HCS 1 B-56596
PVC <φ100mm

Economy type Recipro saw blade

Teeth Overall Blade

Type per length thickness Application Tooth Material Per pkg. Part No.
inch (mm) (mm)
For Metal
metal plate 3-8mm 2 D-51627
14 152 0.9 Bi-Metal
pipe 10-100mm 25 D-51627-25
metal plate 3-8mm 2 D-51655
14 225 0.9 Bi-Metal
pipe 10-175mm 25 D-51655-25
metal plate 1.5-4mm 2 D-51633
18 152 0.9 Bi-Metal
pipe 5-100mm 25 D-51633-25
metal plate 1.5-4mm 2 D-51661
18 225 0.9 Bi-Metal
pipe 5-175mm 25 D-51661-25
metal plate 0.7-3mm 2 D-51649
24 152 0.9 Bi-Metal
pipe 5-100mm 25 D-51649-25
metal plate 0.7-3mm 2 D-51677
24 225 0.9 Bi-Metal
pipe 5-175mm 25 D-51677-25
For Wood

6 152 1.2 For wood 㸺100mm. HCS 2 D-53089

Recipro saw blade assortment

Teeth Overall Blade

Tooth Per
Type No. per length thickness Application Part No.
Material pkg.
inch (mm) (mm)
Fast cut for metal
B-05038 7-18 152 0.9 Bi-Metal 1
(Iron/steel 1.5-8.0mm, Plastic 5-77mm)
Fast cut for non-ferrous metal,
aluminum, plastics, wood with nail,
B-05044 6-11 152 0.9 Bi-Metal 1 B-13677
steel (Iron/steel 5-8mm, Plastic 5-
77mm, Wood 5-77mm)

B-05153 6-10 203 1.0 Fast cut for wood HCS 1

Recipro saw blade plastic case assortment

Teeth Overall Blade

Tooth
Type No. per length thickness Application Per pkg. Part No.
Material
inch (mm) (mm)
Recipro saw blade set A 3 items (total 6pcs / set)

B-05153 6-10 203 1.0 Fast cut for wood HCS 2

For Softwood, chipboard, wood core

B-16798 6 152 1.25 HCS 2 B-44432
plywood

B-05175 6 152 1.25 For wood with nails 10mm-100mm Bi-Metal 2

Recipro saw blade set B 3 items (total 6pcs / set)

Fast cut for non-ferrous metal, aluminum,
B-05044 6-11 152 0.9 plastics, wood with nail, steel (Iron/steel 5- Bi-Metal 2
8mm, Plastic 5-77mm, Wood 5-77mm)
B-16776 metal plate 3-8mm B-44448
14 228 0.9 Bi-Metal 2
pipe 10-175mm

B-16782 metal plate 1.5-4mm

18 228 0.9 Bi-Metal 2
pipe 5-175mm
Recipro saw blade set C 3 items (total 6pcs / set)
metal plate 3-8mm
D-51627 14 152 0.9 Bi-Metal 2 D-53051
pipe 10-100mm
 Teeth Overall Blade
Tooth
Type No. per length thickness Application Per pkg. Part No.
Material
inch (mm) (mm)
metal plate 1.5-4mm
D-51633 18 152 0.9 Bi-Metal 2
pipe 5-100mm

D-53089 6 152 1.2 For wood 㸺100mm. HCS 2

Board Cutter Blade

For Model:
DSD140, DSD180, SD100D
Blade length Blade width Blade thickness
Application Tooth Material Per pkg. Part No.
(mm) (mm) (mm)
2 B-49703
Plasterboard
55 18 0.55 HCS 10 B-49703-10
(<30mm )
25 B-49703-25
2 B-49719
55 18 0.55 Wood (<30mm ) HCS 10 B-49719-10
25 B-49719-25

Band saw blade

Teeth shape (Image)

Wave teeth
Raker teeth

Thickness : 0.5 mm, Length : 2,240 mm

Model No. Type Width (mm) No. of teeth per inch Teeth shape Application Part No.
16 4 Wood/ for cross-cut B-16667

Carbon steel 13 4 Wood/ for universal B-16673

LB1200F
(3pcs. /set) 6 6 Wood/ for curve-cut B-16689
16 14 Nonferrous metal B-16695
Width : 13 mm, Thickness : 0.5 mm, Length : 1,140 mm
 6 Wood 792567-9

Carbon steel More than 5 mm 14 792560-3

Plastics and non-ferrous
(3pcs. /set) 4 mm- 5 mm 18 metal.Mild steel, 792559-8
DPB180, cast steel and cast iron.
Less than 4 mm 24 792558-0
2107F,
2107FW 792557-2
More than 5 mm 14 Plastics and non-ferrous metal.
Bi-Metal Mild steel, cast steel 194691-8
(1pc.) 4 mm- 5 mm 18 and cast iron. Hard steel and 792556-4
stainless steel.
Less than 4 mm 24 194692-6
Width : 13 mm, Thickness : 0.5 mm, Length : 835 mm
3mm-6 mm 14 Plastics and non-ferrous metal. B-40543
DPB181 Bi-Metal Mild steel, cast steel
2 mm- 3 mm 18 B-40559
DPB182 (5pc.) and cast iron. Hard steel and
less than 2mm 24 stainless steel. B-40565
ACCESSORIES
Brushing
Accessories 119

Brushes for Grainder

(Wood/Metal)
Drilling
(Masonry)
Drilling
Wire Type

Fastening
Crimped Knotted Knotted2
Ideal for light rust removal Ideal for heavy work Ideal for especially heavy work

Screw Bit Sets

Drill and
Fine Coarse

Shape Type

Cutting
Reciprosawing
Cup type Wheel type Bevel type

Jigsaw /
Effective for flat or rugged surface Effective for working at spot Effective for working at corner

Brushes for drill

Brushing
Bonded Abrasive
Brush Type

Coated Abrasive
Recommended Crimped steel wire Nylon Coarse (#80) Nylon fine (#240)
Acceptable Ideal for light rust and paint removal Ideal for light rust and paint removal Ideal for surface finishing for metal,
for metal. for metal, wood and PVC. wood and PVC.

Multi Tool
Wood

PVC
Diamond

Metal
Routering
Planing /

Finishing (Metal surface)

brushed by Nylon fine (#240)
after brushing by Nylon Coarse (#80)
OPE

Shape Type
Miscellaneous

Cup type Wheel type End type Flap type

Effective for flat or rugged surface Effective for working at spot Effective for tight or narrow place Effective for treatment for wood
 Wire wheel brush, Crimped wire
Nylon brush for Drill

Nylon cup brush

Size Shank dia. Part No.

Size Grit Shank dia. Part No. 38mm (1-1/2'') 6mm (1/4'') D-39958

50mm(2’’) coarse(#80) 6mm (1/4'') D-45509 50mm (2'') 6mm (1/4'') D-39964

63mm(2-1/2’’) coarse(#80) 6mm (1/4'') D-45515 63mm (2-1/2'') 6mm (1/4'') D-39970

75mm(3’’) coarse(#80) 6mm (1/4'') D-45521 75mm (3'') 6mm (1/4'') D-39986

50mm(2’’) Fine(#240) 6mm (1/4'') D-45537 100mm (4'') 6mm (1/4'') D-39992
Wire end brush, Crimped wire
63mm(2-1/2’’) Fine(#240) 6mm (1/4'') D-45543
75mm(3’’) Fine(#240) 6mm (1/4'') D-45559

Nylon wheel brush

Size Shank dia. Part No.

Size Grit Shank dia. Part No. 12mm (1/2'') 6mm (1/4'') D-40004
38mm (1-1/2'') coarse(#80) 6mm (1/4'') D-45565 19mm (3/4'') 6mm (1/4'') D-40010

50mm (2'') coarse(#80) 6mm (1/4'') D-45571 25mm (1'') 6mm (1/4'') D-40026

63mm (2-1/2'') coarse(#80) 6mm (1/4'') D-45587 30mm (1-1/4'') 6mm (1/4'') D-40032

75mm (3'') coarse(#80) 6mm (1/4'') D-45593

100mm (4'') coarse(#80) 6mm (1/4'') D-45602 Wire brush set for Drill
38mm (1-1/2'') Fine(#240) 6mm (1/4'') D-45618
50mm (2'') Fine(#240) 6mm (1/4'') D-45624
63mm (2-1/2'') Fine(#240) 6mm (1/4'') D-45630
75mm (3'') Fine(#240) 6mm (1/4'') D-45646
100mm (4'') Fine(#240) 6mm (1/4'') D-45652

Nylon end brush

Brush type Size Shank dia. Part No.
Wire cup-Crimped 63mm(2-1/2")
Wire cup-Crimped 75mm(3")
6mm (1/4'') D-65729
Wire wheel-Crimped 75mm(3")

Size Grit Shank dia. Part No. Wire wheel-Crimped 100mm(4")

Wire End-Crimped 25mm(1")
12mm (1/2'') coarse(#80) 6mm (1/4'') D-45668
Wire Wheel-Crimped 50mm(2") 6mm (1/4'') D-66070
17mm (3/4'') coarse(#80) 6mm (1/4'') D-45674
Wire Cup-Crimped 50mm(2")
24mm (1'') coarse(#80) 6mm (1/4'') D-45680
30mm (1-1/4'') coarse(#80) 6mm (1/4'') D-45696
12mm (1/2'') Fine(#240) 6mm (1/4'') D-45705 Wire brush
17mm (3/4'') Fine(#240) 6mm (1/4'') D-45711 For Model:
A: 100mm Disc / Angle Grinder
24mm (1'') Fine(#240) 6mm (1/4'') D-45727 B: 125, 150mm Angle Grinder
30mm (1-1/4'') Fine(#240) 6mm (1/4'') D-45733 C: 180, 230mm Angle Grinder
D: 230mm Angle Grinder

Nylon flap brush

Wire Cup brush, Crimped wire
0.3mm crimped steel wire
(Ideal for light rust removal
Size Grit Shank dia. Part No. from flat surfaces and edges.)

100mm(4’’) coarse(#80) 6mm (1/4'') D-45749

100mm(4’’) Fine(#240) 6mm (1/4'') D-45755

Wire brush for Drill

Wire cup brush, Crimped wire For Model Size Spindle thread Part No.
A 60mm M10 x 1.5 D-24066
B 60mm M14 x 2 D-24072

Size Shank dia. Part No. A 2-1/2'' 5/8''-11 D-26515

A 75mm M10 x 1.5 D-24088
38mm (1-1/2'') 6mm (1/4'') D-39908
50mm (2'') 6mm (1/4'') D-39914 B 75mm M14 x 2 D-24094

63mm (2-1/2'') 6mm (1/4'') D-39920 A 3'' 5/8''-11 D-26521

75mm (3'') 6mm (1/4'') D-39936 C 100mm M14 x 2 D-29284

80mm (3-1/8'') 6mm (1/4'') D-39942 C 4'' 5/8''-11 D-31697
Wire Cup brush, Crimped wire, brass-coated Wire bevel brush, Crimped wire
0.3mm Brass coated steel wire 0.3mm crimped steel wire
(Ideal for light rust removal. (Best for cleaning sides)
Prevented from wire corrosion.)

For Model Size Spindle thread Part No.

For Model Size Spindle thread Part No.
B, C 100mm M14 x 2 D-39827
B 60mm M14 x 2 D-39746
B, C 4'' 5/8''-11 D-39833
B 2-1/2'' 5/8''- 11 D-39752
B, C 115mm M14 x 2 D-39849
B 75mm M14 x 2 D-39768
B, C 4-1/2'' 5/8''-11 D-39855
B 3'' 5/8''- 11 D-39774
C 90mm M14 x 2 D-39780
C 3-1/2'' 5/8''- 11 D-39796
Wire bevel brush, Knotted wire
0.5mm knotted steel wire
C 100mm M14 x 2 D-39805 (Effective for edges and corners.)
C 4'' 5/8''- 11 D-39811

Wire Cup brush, Knotted wire

0.5mm knotted steel wire1 For Model Size Spindle thread Part No.
(Ideal for heavy work
B, C 100mm M14 x 2 D-39861
for fast cleaning of large surface.)
B, C 4'' 5/8''-11 D-39877
B, C 115mm M14 x 2 D-39883
B, C 4-1/2'' 5/8''-11 D-39899

For Model Size Spindle thread Part No.

A 60mm M10 x 1.5 D-24103 Slit paper wheel 120-40
B 60mm M14 x 2 D-24119 (For rust and paint removal)
For Model:
A 2-1/2'' 5/8''-11 D-26537 9741
A 75mm M10 x 1.5 D-24125
B 75mm M14 x 2 D-24131 Part No.
A 3'' 5/8''-11 D-26543 794380-1
C 4'' 5/8''-11 D-31706

Cotton buff wheel 120

Wire Cup brush, Knotted wire 2 (For polishing)
0.5mm knotted steel wire2 For Model:
(Ideal for especially heavy work.) 9741

Part No.

794381-9

For Model Size Spindle thread Part No.

A 60mm M10 x 1.5 D-24147 Wire brush wheel 120
(For rust removal)
B 60mm M14 x 2 D-24153 For Model:
A 2-1/2'' 5/8''-11 D-26559 9741

C 100mm M14 x 2 D-29290

C 4'' 5/8''-11 D-31712 Part No.

794382-7

Wire wheel brush, Knotted wire

0.5mm knotted steel wire
(Effective for heavy duty cleaning at spot.)
Nylon brush wheel
For Model:
9741

For Model Size Spindle thread Part No.

B, C 100mm M14 x 2 D-29555 Application Part No.
B, C 115mm M14 x 2 D-29561
120-80 Coarse 794384-3
B, C 125mm M14 x 2 D-29577
120-100 Medium 794379-6
C 150mm M14 x 2 D-45761
120-240 Fine 794383-5
C 6'' 5/8''-11 D-45783
D 175mm M14 x 2 D-45777
D 7'' 5/8''-11 D-45799
ACCESSORIES
Bonded Abrasive

Long life Flexible Always use back up pad

Accessories 123

Types of Wheels

Grinding
Grinding Cutting

Grinding wheel Thin cut-off wheel (Flat)

Diameter 100mm~230mm
Thickness: 0.8mm~2.0mm
Diameter 100mm~230mm
Thickness: 6.0mm~7.2mm

Flexible grinding wheel Thin cut-off wheel (Depressed)

Bonded Abrasive
Diameter 100mm~230mm Diameter 100mm~230mm
Thickness: 2.0mm~4.0mm Thickness: 0.8mm~2.0mm

*ALWAYS USE BACK-UP PAD

Cut-off wheel (Flat)

Cut-off wheel
for portable cut-off Diameter 100mm~230mm
Thickness: 2.0mm~3.0mm

Cut-off wheel (Depressed)

Diameter 100mm~230mm
Thickness: 3.0mm

Diameter 305mm~405mm
Thickness: 2.4mm~3.0mm
124 Accessories
Abrasive Disc

Validity

Pictograms for safety use

Part number
Spec
Size
Max operating speed Application
Standard Color code
Blue: Metal

Gold: INOX

Green: Masonry

Silver: Aluminum
How to read the spec.
Aluminum Oxide Group ( mainly for metal & INOX )
Brown Fused Aluminum : A Single Aluminum Oxide : SA
The most common abrasive material for metal. Single crystal abrasive material with high tenacity.
Higher durability and grinding/cutting performance
than A.
White Aluminum Oxide : WA Alumina Zirconium : Z
High purity abrasive material, eliminated Extremely sharp and hard abrasive material. Higher
extraneous elements from A. Higher grinding durability and grinding/cutting performance than SA.
and cutting performance than A.
Bonded Abrasive

Ceramic :
Extremely sharp and high resistant to shock/heat/wear.
High grade abrasive material with excellent grinding performance and durability.

Silicon Oxide Group (mainly for non-metallic)

Black Silicon Carbide： C Green Silicon Carbide : GC
The most common abrasive material for Higher purity than C, eliminated extraneous elements,
non-metal. thus having higher grinding and cutting performance
than C, but a little lower durability than C.

Grit Size 24 36 60 80 120

Coarse Fine

Hardness of grinding wheel

Very Soft Soft Middle Hard Very Hard
Closer to A, softer grinding wheel is
Closer to Z, harder grinding wheel is
Soft grinding wheel Hard work piece A-G H-K L-O P-S T-Z
Hard grinding wheel Soft work piece

Type of Bond
BF : Reinforced resinoid bond
V : Vitrified bond
Accessories 125

Abrasive cut-off wheel series for portable cut-off

For Metal For INOX

Life
2.5mm 2.8mm

3.0mm
3.0mm For Metal stutd
Fast cut 2.5mm
100

Speed
100

Abrasive Cut-off wheel Fast cut type

Bonded Abrasive
Feature
1. Fast cutting

Cutting speed

Current 100 20%

UP

NEW

120
* The test results depend to a great extent on the hardness of materials, etc.
* The number in the bar graphs are relative values when the capacity of current wheel is indexed at 100.

2. Smooth cutting 3. Less burr and burning

A little softer wheels

provides nice sense of
cutting. Lightens the
worker's load.

Current NEW
126 Accessories
Abrasive Cut-off wheel for Metal stud

Feature
1. Thinner blade & the optimum bonding 2. Ideal for cordless tools
The amount of cutting per 1charge

2.5mm thickness blade for The optimum bonding for Current 100 30%
smooth and fast cutting. fast cutting and longer life.
UP

NEW

2.5 mm 130
* The test results depend to a great extent on the hardness of materials, etc.
* The number in the bar graphs are relative values when the capacity of current wheel is indexed at 100.

Abrasive Cut-off wheel for INOX

Bonded Abrasive

Feature
1. Thinner blade & the optimum bonding 2. Long life
Life

Heat-resistance property Current 100 150%

provides long life. UP

NEW

250
* The test results depend to a great extent on the hardness of materials, etc.
* The number in the bar graphs are relative values when the capacity of current wheel is indexed at 100.
 Grinding wheel/ Stainless

Five-star range
Grinding wheel/ Metal
Size (mm) Grit Per pkg. Part No.
Size (mm) Grit Per pkg. Part No.
100 x 6 x 22.23 A36P 1 E-00480(EN)
115 x 7 x 22.23 A24P 1 B-66911(EN)
115 x 6 x 22.23 A36P 1 E-00365(EN) 125 x 7 x 22.23 A24P 1 B-66927(EN)
125 x 6 x 22.23 A36P 1 E-00393(EN)

Grinding wheel/ Stainless

100 x 6 x 22.23 WA36N 1 E-00496(EN)

115 x 6 x 22.23 WA36N 1 E-00371(EN) Three-star range

125 x 6 x 22.23 WA36N 1 E-00402(EN)

Thin Cut-off wheel (Flat) Size (mm) Grit Per pkg. Part No.

100 x 1.2 x 22.23 A60T 1 E-00505(EN) 100 x 6 x 16 WA36N 1 A-80852(EN)

115 x 1.2 x 22.23 A60T 1 E-00387(EN) 100 x 6 x 16 WA36N 1 B-46349 (EN)

125 x 1.2 x 22.23 A60T 1 E-00418(EN) 115 x 6 x 22.23 WA36N 1 A-80640(EN)

125 x 6 x 22.23 WA36N 1 A-80874(EN)

Grinding wheel/ Metal 125 x 6 x 22.23 WA36N 1 B-46361 (EN)

150 x 6 x 22.23 WA36N 1 A-80846(EN)

180 x 6 x 22.23 WA36O 1 A-80880(EN)

Three-star range
180 x 6 x 22.23 WA36O 1 B-46377 (EN)

230 x 6 x 22.23 WA36O 1 A-80896(EN)

Size (mm) Grit Per pkg. Part No.
100 x 4 x 16 A36P 1 A-80905(EN) 230 x 6 x 22.23 WA36O 1 B-46383 (EN)

100 x 6 x 16 A36P 1 A-80911(EN)

100 x 6 x 16 A36P 1 B-46246 (EN)
115 x 6 x 22.23 A36P 1 741458-1
115 x 6 x 22.23 A36P 1 A-80927(EN)
115 x 6 x 22.23 A36P 1 B-46252 (EN) Two-star range
125 x 6 x 22.23 A36P 1 A-80933(EN)
125 x 6 x 22.23 A36P 1 B-46268 (EN) Size (mm) Grit Per pkg. Part No.
150 x 6 x 22.23 A36P 1 A-84981(EN)
100 x 6 x 16 C24R 1 D-18493(EN)
180 x 6 x 22.23 A24P 1 741425-6
115 x 6 x 22.23 C24R 1 D-18502(EN)
180 x 6 x 22.23 A24R 1 A-88886(EN)
125 x 6 x 22.23 C24R 1 D-18518(EN)
180 x 6 x 22.23 A36P 1 741426-4
180 x 6 x 22.23 A36P 1 A-80949(EN) 150 x 6 x 22.23 C24R 1 D-18524(EN)

180 x 6 x 22.23 A36P 1 B-46274 (EN) 180 x 6 x 22.23 C24R 1 D-18530(EN)

230 x 6 x 22.23 A36P 1 A-80955(EN) 230 x 6 x 22.23 C24R 1 D-18546(EN)
230 x 6 x 22.23 A36P 1 B-46280 (EN)
Two-star range

100 x 6 x 16 A24R 1 D-18443(EN)

100 x 6 x 16 A24P 1 D-65090(EN) Three-star range
115 x 6 x 22.23 A24R 1 D-18459(EN)
125 x 6 x 22.23 A24R 1 D-18465(EN)
Size (mm) Grit Per pkg. Part No.
150 x 6 x 22.23 A24R 1 D-26163(EN)
100 x 6 x 16 A36N 1 B-17706(EN)
180 x 6 x 22.23 A24R 1 D-18471(EN)
115 x 6 x 22.23 A36N 1 B-14560(EN)
180 x 6 x 22.23 A24P 1 D-65931(EN)
230 x 6 x 22.23 A24R 1 D-18487(EN) 125 x 6 x 22.23 A36N 1 B-17653(EN)

150 x 6 x 22.23 A36N 1 B-17669(EN)

180 x 6 x 22.23 A36N 1 B-14576(EN)

230 x 6 x 22.23 A36N 1 B-14582(EN)

Grinding wheel for Heavy Industries

Needless to use Back up pad

Three-star range

Size (mm) Grit Per pkg. Part No.

Four-star range 100 x 3.8x 16 36 1 B-29147
100 x 3.8x 16 60 1 B-29153

Size (mm) Grit Per pkg. Part No.

115 x 7.2 x 22.23 A24S 1 B-56362 (EN)
115 x 7.2 x 22.23 AZ24N 1 B-56378 (EN)
125 x 7.2 x 22.23 A24S 1 B-56384 (EN) Always use back-up pad
Three-star range
125 x 7.2 x 22.23 AZ24N 1 B-56390 (EN)
180 x 7.2 x 22.23 A24S 1 B-56409 (EN)
180 x 7.2 x 22.23 AZ24N 1 B-56415 (EN) Size (mm) Grit Per pkg. Part No.
100 x 2 x 16 WA46 1 B-18421
100 x 2 x 16 WA60 1 B-18437
100 x 2 x 16 WA80 1 B-18443
100 x 2 x 16 WA120 1 B-18459
Three-star range
100 x 3 x 16 WA36 1 B-18465(EN)
100 x 3 x 16 WA46 1 B-18471
Size (mm) Grit Per pkg. Part No.
100 x 3 x 16 WA60 1 B-18487(EN)
100 x 6 x 16 A24R 1 B-21107(EN) 100 x 3 x 16 WA80 1 B-18493
115 x 6 x 22.23 A24R 1 B-21113(EN) 115 x 3 x 22.23 WA36 1 B-18502(EN)
125 x 6 x 22.23 A24R 1 B-21129(EN) 115 x 3 x 22.23 WA46 1 B-18518
180 x 6 x 22.23 A24R 1 B-21135(EN) 115 x 3 x 22.23 WA60 1 B-18524
230 x 6 x 22.23 A24R 1 B-21141(EN) 115 x 3 x 22.23 WA80 1 B-18530
125 x 3 x 22.23 WA36 1 B-18546
Flexible grinding wheel 125 x 3 x 22.23 WA46 1 B-18552
125 x 3 x 22.23 WA60 1 B-18568
125 x 3 x 22.23 WA80 1 B-18574
180 x 3 x 22.23 WA36 1 B-18580

Always use back-up pad 180 x 3 x 22.23 WA46 1 B-18596

Three-star range 180 x 3 x 22.23 WA60 1 B-18605
180 x 3 x 22.23 WA80 1 B-18611

Size (mm) Grit Per pkg. Part No. 230 x 3 x 22.23 WA36 1 B-18627
230 x 3 x 22.23 WA46 1 B-18633
100 x 2 x 16 AC46 1 B-18203
230 x 3 x 22.23 WA60 1 B-18649
100 x 2 x 16 AC60 1 A-85139
230 x 3 x 22.23 WA80 1 B-18655
100 x 2 x 16 AC80 1 B-18219
100 x 2 x 16 AC120 1 B-18225
100 x 3 x 16 AC36 1 B-18231(EN)
100 x 3 x 16 AC46 1 B-18247(EN)
100 x 3 x 16 AC60 1 B-18253(EN) Always use back-up pad
Three-star range
100 x 3 x 16 AC80 1 B-18269(EN)
115 x 3 x 22.23 AC36 1 B-18275(EN)
115 x 3 x 22.23 AC46 1 B-18281(EN) Size (mm) Grit Per pkg. Part No.

115 x 3 x 22.23 AC60 1 B-18297(EN) 100 x 3 x 16 GC60P 1 B-51356 (EN)

115 x 3 x 22.23 AC80 1 B-18306(EN) 100 x 3 x 16 GC80P 1 B-51362 (EN)
125 x 3 x 22.23 AC36 1 B-18312 100 x 3 x 16 GC120P 1 B-51378 (EN)
125 x 3 x 22.23 AC46 1 B-18328
125 x 3 x 22.23 AC60 1 B-18334
Flexible grinding wheel ideal for cordless angle grinder
125 x 3 x 22.23 AC80 1 B-18340
180 x 3 x 22.23 AC36 1 B-18356
180 x 3 x 22.23 AC46 1 B-18362
180 x 3 x 22.23 AC60 1 A-88490
180 x 3 x 22.23 AC80 1 B-18378
Needless to use Back up pad
230 x 3 x 22.23 AC36 1 B-18384 Four-star range
230 x 3 x 22.23 AC46 1 B-18390
230 x 3 x 22.23 AC60 1 B-18409
Size (mm) Grit Per pkg. Part No.
230 x 3 x 22.23 AC80 1 B-18415
100 × 4.0 × 16 WA36P 1 B-52392(EN)
115 × 4.0 × 22.23 WA36P 1 B-49775(EN)
125 × 4.0 × 22.23 WA36P 1 B-53110(EN)
Back up pad for Flexible grinding wheel Size (mm) GrGrit Type Per pkg. Part No.
115 x 1.2 x 22.23 WA46R A 12 (Can) D-65953-12(EN)
115 x 1.2 x 22.23 WA60T B 1 D-18817(EN)
125 x 1.2 x 22.23 WA60T A 1 D-18770(EN)
125 x 1.2 x 22.23 WA60T A 10 (Can) D-18770-10(EN)
125 x 1.2 x 22.23 WA46R A 1 D-65969(EN)
125 x 1.2 x 22.23 WA46R A 12 (Can) D-65969-12(EN)
Size (mm) Per pkg. Part No.
125 x 1.6 x 22.23 WA46S B 1 D-18823(EN)
for 100mm 1 B-20476
150 x 2 x 22.23 WA36R A 1 D-29424(EN)
for 115/125mm 1 B-20482
180 x 2 x 22.23 WA36R A 1 D-18786(EN)
for 180mm 1 B-20498
180 x 2 x 22.23 WA46R A 1 D-65975(EN)
for 230mm 1 B-20507
180 x 2 x 22.23 WA36R B 1 D-18839(EN)
230 x 2 x 22.23 WA36R A 1 D-18792(EN)
Thin Cut-off wheel 230 x 2 x 22.23 WA36R B 1 D-18845(EN)

Three-star range

Type A: Flat wheel

Three-star range
Type B: Depressed center wheel
Size (mm) Grit Type Per pkg. Part No.
115 x 1.6 x 22.23 A46U A 1 B-14102(EN) Size (mm) Grit Type Per pkg. Part No.
125 x 1.6 x 22.23 A46U A 1 B-35134(EN) 100 x 1.0 x 16 A60T A 1 B-45319(EN)
115 x 1.0 x 22.23 A60T A 1 B-45325(EN)
125 x 1.0 x 22.23 A60T A 1 B-45331(EN)
150 x 1.6 x 22.23 A60T A 1 B-45347(EN)
180 x 1.6 x 22.23 A60T A 1 B-45353(EN)
Three-star range 230 x 1.9 x 22.23 A60T A 1 B-45369(EN)

Size (mm) GrGrit Type Per pkg. Part No. Thin Cut-off wheell ideal for cordless angle grinder
100 x 1.0 x 16 A60T A 1 B-12201(EN)
100 x 1.0 x 16 A60T A 12 (Plastic case) B-12201-12(EN)
100 x 1.6 x 16 A36S A 1 B-45749(EN)
115 x 1.0 x 22.23 A60T A 1 B-12217(EN) Four-star range
115 x 1.0 x 22.23 A60T A 12 (Plastic case) B-12217-12(EN)
115 x 1.2 x 22.23 A60T B 1 B-64587(EN) Type A: Flat wheel
Type B: Depressed center wheel
115 x 1.6 x 22.23 A36S A 1 B-45755(EN)
Size (mm) Grit Type Per pkg. Part No.
125 x 1.0 x 22.23 A60T A 1 B-12239(EN)
100 x 0.8 x 16 Z60T A 1 B-45711(EN)
125 x 1.0 x 22.23 A60T A 12 (Plastic case) B-12239-12(EN)
12 (Plastic
125 x 1.2 x 22.23 A60T B 1 B-64593(EN) 100 x 0.8 x 16 Z60T A B-45711-12 (EN)
case)
125 x 1.6 x 22.23 A36S A 1 B-46931(EN) 115 x 0.8 x 22.23 Z60T A 1 B-45727(EN)
150 x 1.6 x 22.23 A60T A 1 B-12251(EN) 12 (Plastic
115x 0.8 x 22.23 Z60T A B-45727-12 (EN)
180 x 1.6 x 22.23 A60T A 1 B-12267(EN) case)

180 x 1.6 x 22.23 A60T B 1 B-64602(EN) 115 x 0.8 x 22.23 Z60T B 1 B-46947(EN)

180 x 1.8 x 22.23 A36S A 1 B-60458(EN) 125 x 0.8 x 22.23 Z60T A 1 B-45733(EN)
230 x 1.9 x 22.23 A60T A 1 B-12273(EN) 12 (Plastic
125 x 0.8 x 22.23 Z60T A B-45733-12 (EN)
case)
230 x 1.9 x 22.23 A60T B 1 B-64618(EN)
125 x 0.8 x 22.23 Z60T B 1 B-46953(EN)
230 x 2 x 22.23 A36S A 1 B-60464(EN)
    

Two-star range

100 x 1.0 x 16 WA60T A 1 D-18758(EN)

100 x 1.2 x 16 WA46R A 1 D-65947(EN)
100 x 1.2 x 16 WA46R A 12 (Can) D-65947-12(EN)
100 x 1.2 x 16 WA60T B 1 D-18801(EN)
115 x 1.2 x 22.23 WA60T A 1 D-18764(EN)
115 x 1.2 x 22.23 WA60T A 10 (Can) D-18764-10(EN)
115 x 1.2 x 22.23 WA46R A 1 D-65953(EN)
 Two-star range
Cut-off wheel

Size (mm) Grit Type Per pkg. Part No.

Three-star range 100 x 3 x 16 C30S A 1 D-18708(EN)
100 x 3 x 16 C30S B 1 D-18605(EN)
Type A: Flat wheel 115 x 3 x 22.23 C30S A 1 D-18714(EN)
Type B: Depressed center wheel 115 x 3 x 22.23 C30S B 1 D-18611(EN)
Size (mm) Grit Type Per pkg. Part No. 125 x 3 x 22.23 C30S A 1 D-18720(EN)
100 x 2.0 x 16 A46S A 1 A-85123(EN) 125 x 3 x 22.23 C30S B 1 D-18627(EN)
100 x 2.5 x 16 A30R A 1 A-85298(EN) 180 x 3 x 22.23 C30S A 1 D-18736(EN)
100 x 2.5 x 16 A30R A 1 B-46399 (EN) 180 x 3 x 22.23 C30S B 1 D-18633(EN)
100 x 3 x 16 A30T B 1 A-83587(EN) 230 x 3 x 22.23 C30S A 1 D-18742(EN)
115 x 2.5 x 22.23 A30R A 1 A-85307(EN) 230 x 3 x 22.23 C30S B 1 D-18649(EN)
115 x 2.5 x 22.23 A30R A 1 B-46408 (EN)
115 x 3 x 22.23 A30T B 1 A-83593(EN)
125 x 2.5 x 22.23 A30R A 1 A-85313(EN)
2in1 grinding wheel
125 x 2.5 x 22.23 A30R A 1 B-46414 (EN)
125 x 3 x 22.23 A30T B 1 A-83602(EN)
150 x 3 x 22.23 A30T B 1 B-05050(EN)
Appropriate wheel cover is required
180 x 2.5 x 22.23 A30R A 1 A-85329(EN)
Three-star range
180 x 2.5 x 22.23 A30R A 1 B-46420 (EN)
180 x 3 x 22.23 A30T B 1 A-83618(EN)
Size (mm) Grit Per pkg. Part No.
230 x 2.5 x 22.23 A30R A 1 A-85335(EN)
100 x 3.2 x 16 A36T 1 B-21222 (EN)
230 x 2.5 x 22.23 A30R A 1 B-46436 (EN)
115 x 3.2 x 22.23 A36T 1 B-21238 (EN)
230 x 3 x 22.23 A30T B 1 A-83624(EN)
Two-star range 125 x 3.2 x 22.23 A36T 1 B-21244 (EN)
180 x 4.0 x 22.23 A36T 1 B-21250 (EN)

Size (mm) Grit Type Per pkg. Part No.

100 x 2.5 x 16 A30S A 1 D-18655(EN) 2in1 grinding wheel ideal for Cordless Angle Grinder
100 x 3 x 16 A30S B 1 D-18552(EN)
115 x 2.5 x 22.23 A30S A 1 D-18661(EN)
115 x 3 x 22.23 A30S B 1 D-18568(EN)
125 x 2.5 x 22.23 A30S A 1 D-18677(EN) Appropriate wheel cover is required
Four-star range
125 x 3 x 22.23 A30S B 1 D-18574(EN)
150 x 3 x 22.23 A30S B 1 D-29418(EN)
150 x 2.5 x 22.23 A30S A 1 D-29402(EN) Size (mm) Grit Per pkg. Part No.
180 x 2.5 x 22.23 A30S A 1 D-18683(EN) 100 × 2.2 × 16 SA46P 1 B-51649 (EN)
180 x 3 x 22.23 A30S B 1 D-18580(EN)
115 × 2.0 × 22.23 SA46P 1 B-50360 (EN)
230 x 2.5 x 22.23 A30S A 1 D-18699(EN)
125 × 2.2 × 22.23 SA46P 1 B-51655 (EN)
230 x 3 x 22.23 A30S B 1 D-18596(EN)

Three-star range

Size (mm) Grit Type Per pkg. Part No.

100 x 3 x 16 C30T A 1 A-86739(EN)
100 x 3 x 16 C30T B 1 A-86745(EN)
115 x 3 x 22.23 C30T A 1 A-85357(EN)
115 x 3 x 22.23 C30T B 1 A-85254(EN)
125 x 3 x 22.23 C30T A 1 A-85363(EN)
125 x 3 x 22.23 C30T B 1 A-85260(EN)
180 x 3 x 22.23 C30T A 1 A-85379(EN)
180 x 3 x 22.23 C30T B 1 A-85276(EN)
230 x 3 x 22.23 C30T A 1 A-85385(EN)
230 x 3 x 22.23 C30T B 1 A-85282(EN)
Abrasive cut-off wheel for portable cut-off

Three-star range
Four-star range
Rogh or
Size (mm) Grit G.F.Q'ty Per pkg. Part No.
Smooth
Rogh or
Size (mm) Grit G.F.Q'ty Per pkg. Part No. 305 x 3.0 x 25.4 A30P - 2.0G 5 B-64571-5(EN)
Smooth
355 x 2.5 x 25.4 A36P - 2.0G 5 B-49448-5(EN) 305 x 3.0 x 25.4 A30P - 2.0G 25 B-64571-25(EN)
355 x 2.5 x 25.4 A36P - 2.0G 25 B-49448-25(EN) 355 x 2.8 x 25.4 A30P - 2.0G 5 B-64565-5(EN)
Three-star range 355 x 2.8 x 25.4 A30P - 2.0G 25 B-64565-25(EN)

305 x 2.8 x 25.4 A36P Rough 1.0G 5 A-01345 Abrasive cut-off wheel for cordless portable cut-off
305 x 2.8 x 25.4 A36P Rough 1.0G 25 A-05038
305 x 3 x 25.4 A36P Rough 1.0G 25 A-88456-25
305 x 3 x 25.4 A36P Smooth 1.0G 25 A-87650-25
355 x 2.4 x 25.4 A30Q Rough 1.0G 5 B-20769-5
355 x 2.4 x 25.4 A30Q Rough 1.0G 25 B-20769-25
355 x 3 x 25.4 A30P Smooth 1.0G 5 B-64353-5(EN)
355 x 3 x 25.4 A30P Smooth 1.0G 25 B-64353-25(EN)
Specialized
355 x 3 x 25.4 A30P - 2.0G 5 B-16891-5(EN) Rogh or
Size (mm) Grit G.F.Q'ty Per pkg. Part No.
Smooth
355 x 3 x 25.4 A30P - 2.0G 25 B-16891-25(EN)
355 x 2.5 x 25.4 A36P - 2.0G 5 B-64696-5(EN)
355 x 3 x 25.4 A30Q Rough 1.0G 5 B-20775-5
355 x 2.5 x 25.4 A36P - 2.0G 25 B-64696-25(EN)
355 x 3 x 25.4 A30Q Rough 1.0G 25 B-20775-25
355 x 3 x 25.4 A30R - 2.0G 5 B-20753-5(EN)
355 x 3 x 25.4 A30R - 2.0G 25 B-20753-25(EN) Grinding wheel for Bench grinder
355 x 3 x 25.4 A36P Rough 1.0G 5 A-01351
355 x 3 x 25.4 A36P Rough 1.0G 25 A-05044
355 x 3 x 25.4 A36P Rough 1.0G 25 A-87585-25
355 x 3 x 25.4 A36P Rough 1.0G 5 B-10665-5(EN)
355 x 3 x 25.4 A36P Rough 1.0G 25 B-10665-25(EN) Size (mm) Grit Part No.
355 x 3 x 25.4 A36P Rough 1.0G 5 B-10730-5 150 x 16 x 12.7 A36M B-51904 (EN)
355 x 3 x 25.4 A36P Rough 1.0G 25 B-10730-25
150 x 16 x 12.7 A60M B-51910 (EN)
355 x 3 x 25.4 A36P Smooth 1.0G 5 A-87672-5
150 x 16 x 12.7 WA60K B-51926(EN)
355 x 3 x 25.4 A36P Smooth 1.0G 25 A-87672-25
355 x 3 x 25.4 A36P Smooth 1.0G 5 A-89545-5 150 x 16 x 12.7 GC120H B-51932 (EN)

355 x 3 x 25.4 A36P Smooth 1.0G 25 A-89545-25 150 x 6.4 x 12.7 A60M A-47195
355 x 3 x 25.4 A36P Smooth 1.5G 5 B-19881-5(EN) 205 x 19 x 15.88 A36P B-51948 (EN)
355 x 3 x 25.4 A36P Smooth 1.5G 25 B-19881-25(EN) 205 x 19 x 15.88 A60P B-51954 (EN)
355 x 3 x 25.4 A36P - 2.0G 25 B-55360-25 (EN)
205 x 19 x 15.88 WA60K B-51960(EN)
405 x 3 x 25.4 A36P Rough 1.0G 5 A-01367
205 x 19 x 15.88 GC120H B-51976 (EN)
405 x 3 x 25.4 A36P Rough 1.0G 25 A-05050
405 x 3 x 25.4 A36P Rough 1.0G 25 A-88478-25
405 x 3 x 25.4 A36P Smooth 1.0G 25 A-87694-25 Grinding wheel for Straight grinder
Two-star range

305 x 3 x 25.4 A30R - 2.0G 5 D-41551-5(EN)

305 x 3 x 25.4 A30R - 2.0G 25 D-41551-25(EN)

Size (mm) Grit Part No.

125 x 19 x 12.7 24P 741015-5

125 x 19 x 12.7 36P 741016-3

125 x 20 x 20.0 24P B-28662 (EN)

125 x 20 x 20.0 36P B-28678 (EN)

150 x 20 x 20.0 24P B-28684 (EN)

150 x 20 x 20.0 36P B-28690 (EN)

Wheel point Tungsten carbide burrs
Application: Application㸸
A: Mild steel, carbon steel, etc. Steel, Cast iron, Stainless, Ni-Co etc
WA: Hardened and special steels. For Model:
GD0600, GD0601C, GD0602, GD0800, GD0800C, GD0801C

per Wheel dia. Shank

No. Type Part No.
pkg. (mm) size (mm)
For Model:
903, 906, GD0800C, GD0810C, GD0600, BGD800, BGD801
1 10 5 3 A 794050-2
Head shape Cut type per pkg. Size (mm) Part No.
1 10 8 3 A 794052-8
A Standard cut 10 10x20x6mm B-52716-10
1 10 10 3 A 794053-6
2 10 5 3 WA 794054-4 A Diamond cut 10 10x20x6mm B-52722-10

2 10 6 3 WA 794055-2 Non-ferrous
A 10 10x20x6mm B-52738-10
cut
2 10 10 3 WA 794057-8
C Standard cut 10 10x20x6mm B-52744-10
3 10 10 3 A 794059-4
C Diamond cut 10 10x20x6mm B-52750-10
For Model:
Non-ferrous
906, GD0800C, GD0810C, GD0600, BGD800, BGD801 C 10 10x20x6mm B-52766-10
cut
1 1 19 6 WA 741614-3 F Standard cut 10 10x20x6mm B-52772-10
1 1 19 1/4'' WA 741617-7
F Diamond cut 10 10x20x6mm B-52788-10
4 1 19 6 WA 741615-1 Non-ferrous
F 10 10x20x6mm B-52794-10
4 1 19 1/4'' WA 741616-9 cut
L Standard cut 10 10x25x6mm B-52803-10

L Diamond cut 10 10x25x6mm B-52819-10

Tungsten carbide burrs
Non-ferrous
L 10 10x25x6mm B-52825-10
cut
M Standard cut 10 10x20x6mm B-52831-10

M Diamond cut 10 10x20x6mm B-52847-10

Non-ferrous
M 10 10x20x6mm B-52853-10
cut
Size: inch
Cut and application Head shape Cut type per pkg. Size (inch) Part No.
For rough cut
<Feature> High efficiency A Standard cut 10 3/8"x3/4"x1/4" B-52962-10
<Surface> Rough
<Material> Metal, Stainless A Diamond cut 10 3/8"x3/4"x1/4" B-52978-10
For Smooth cut A
Non-ferrous
10 3/8"x3/4"x1/4" B-52984-10
<Feature> Less vibration cut
<Surface> Smooth C Standard cut 10 3/8"x3/4"x1/4" B-52990-10
<Material> Metal, Stainless
C Diamond cut 10 3/8"x3/4"x1/4" B-53001-10
For Non-farreous cut
Non-ferrous
<Feature> Less clogging up C 10 3/8"x3/4"x1/4" B-53017-10
<Surface> Rough cut
<Material> Non-ferrous, Plastic F Standard cut 10 3/8"x3/4"x1/4" B-53023-10
Shape and application Clean the burrs on inox F Diamond cut 10 3/8"x3/4"x1/4" B-53039-10
Non-ferrous
F 10 3/8"x3/4"x1/4" B-53045-10
Shape : A cut
L Standard cut 10 3/8"x1"x1/4" B-53051-10

L Diamond cut 10 3/8"x1"x1/4" B-53067-10

Shape : C
Non-ferrous
Deburr of aluminium L 10 3/8"x1"x1/4" B-53073-10
cut
M Standard cut 10 3/8"x3/4"x1/4" B-53089-10
Shape : F
M Diamond cut 10 3/8"x3/4"x1/4" B-53095-10
Non-ferrous
M 10 3/8"x3/4"x1/4" B-53104-10
cut
Shape : L
Wipe the welding line
between steel piate

Shape : M
ACCESSORIES
Coated Abrasive

Hook & Loop backing Grit size Sanding wood Sanding wood

Sanding wood Sanding wood, large Sanding paint Sanding paint

surfaces

Sanding plastic Removing paint Removing paint from Sanding metal

metal or polishing

Polishing Wood, hard and soft Ceramic

134 Accessories
Flap Disc
(Wood/Metal)
Drilling

Size
Application
(Masonry)
Drilling

Part number Large pictogram indicates

recommended application
Pictograms for
Fastening

safety use
Grain type/ Grit size
Standard
Screw Bit Sets

Max operating speed

Drill and
Cutting
Reciprosawing

Backing Type Shape Type

Jigsaw /
Brushing

Fiber glass backing Nylon backing Flat Angled

Standard backing type For heavy duty Effective for flat surface Effective for angles or corners
Bonded Abrasive

Material chart Recommended Acceptable

Coated Abrasive

Description of Grit material Aluminum oxide Zirconia alumina Silicon carbide Ceramic
aluminum oxide

Best for metal Best for INOX and metal Best for Masonry Best for INOX, metal
and non-ferrous
metal

Description of label color

Diamond

Wood
Routering
Planing /

Plastic

Metal
OPE

No ferrous

INOX
Miscellaneous

Masonry
 Accessories 135

Flap Disc

(Wood/Metal)
Drilling
Industrial Flap Disc for Heavy Duty

(Masonry)
Drilling
Fastening
Screw Bit Sets
Drill and
Efficiency

100

Cutting
140
Feature
Life

Reciprosawing
・High efficiency
100

Jigsaw /
・Long life
152
・Suitable for Industry use
High-speed Grinding with high-power grinder.

Brushing
0 50 100 150

Flexible Flap Disc

Bonded Abrasive
Coated Abrasive
Multi Tool
Multi Tool
Diamond

Feature
Routering
Planing /

High flexibility Suitable for grinding on CURVE/EDGE/CORNER surface.

OPE
Miscellaneous
 Backing Backing Dia. Hole dia
Industrial Flap Disc for Heavy Duty Type Shape (mm) (mm)
Grit Part No.
Material: Zirconia aluminum 22.23 Z40 B-22741
High efficiency & Long life. 22.23 Z60 B-22757
Suitable for Industry use. 115
22.23 Z80 B-22763
22.23 Z120 B-22779
Application 22.23 Z40 B-22785
Best
22.23 Z60 B-22791
Fiber Glass Flat 125
22.23 Z80 B-22800
Better
B tt
tt 22.23 Z120 B-22816
22.23 Z40 B-22822
Backing Backing Dia. Hole dia 22.23 Z60 B-22838
Grit Part No. 180
Type Shape (mm) (mm) 22.23 Z80 B-22844
22.23 Z40 B-55603
22.23 Z120 B-22850
22.23 Z60 B-55619
115
22.23 Z80 B-55625
22.23 Z120 B-55631 Flap Disc series
22.23 Z40 B-53920 Material: Zirconia aluminum
22.23 Z60 B-53936
Fiber Glass Angled 125
22.23 Z80 B-53942
22.23 Z120 B-53958 Application
Best
22.23 Z40 B-55647
22.23 Z60 B-55653
180 Better
22.23 Z80 B-55669
22.23 Z120 B-55675
Backing Backing Dia. Hole dia
Grit Part No.
Type Shape (mm) (mm)
Flexible Flap Disc 16 Z36 D-27377
16 Z40 D-27383
Material: Aluminum oxide
High flexibility. 100 16 Z60 D-27399
Suitable for grinding on CURVE/EDGE/CORNER surface. 16 Z80 D-27408
16 Z120 D-27414
22.23 Z36 D-27420
Application
Best 22.23 Z40 D-27436
115 22.23 Z60 D-27442
Better 22.23 Z80 D-27458
22.23 Z120 D-27464
Fiber Glass Angled
22.23 Z36 D-27470
Backing Dia. Hole dia
Shape Grit Part No. 22.23 Z40 D-27486
Type (mm) (mm)
16 A40 D-62686 125 22.23 Z60 D-27492
16 A60 D-62692 22.23 Z80 D-27501
Backing less Flat 100
16 A80 D-62701 22.23 Z120 D-27517
16 A120 D-62717 22.23 Z36 D-27523
22.23 Z40 D-27539
180 22.23 Z60 D-27545
Premium Zirconia Aluminum flap disc
22.23 Z80 D-27551
Material: Zirconia aluminum 22.23 Z120 D-27567
16 Z36 D-27573
16 Z40 D-27589
Application
Best 100 16 Z60 D-27595
16 Z80 D-27604
16 Z120 D-27610
Better
22.23 Z36 D-27626
22.23 Z40 D-27632
Backing Backing Dia. Hole dia 115 22.23 Z60 D-27648
Grit Part No.
Type Shape (mm) (mm)
22.23 Z80 D-27654
22.23 Z40 B-22626
22.23 Z120 D-27660
22.23 Z60 B-22632 Fiber Glass Flat
115 22.23 Z36 D-27676
22.23 Z80 B-22648
22.23 Z40 D-27682
22.23 Z120 B-22654
125 22.23 Z60 D-27698
22.23 Z40 B-22660
22.23 Z80 D-27707
22.23 Z60 B-22676
Fiber Glass Angled 125 22.23 Z120 D-27713
22.23 Z80 B-22682
22.23 Z36 D-27729
22.23 Z120 B-22698
22.23 Z40 D-27735
22.23 Z40 B-22707
180 22.23 Z60 D-27741
22.23 Z60 B-22713
180 22.23 Z80 D-27757
22.23 Z80 B-22729
22.23 Z120 D-27763
22.23 Z120 B-22735
 Backing Backing Dia. Hole dia
Type Shape (mm) (mm)
Grit Part No. Material: Ceramic aluminum oxide
16 Z36 D-27779
16 Z40 D-27785
100 16 Z60 D-27791 Application
Best
16 Z80 D-27800
16 Z120 D-27816
22.23 Z36 D-27822
Backing Backing Dia. Hole dia
22.23 Z40 D-27838 Grit Part No.
Type Shape (mm) (mm)
115 22.23 Z60 D-27844 16 Ce40 D-28254
Nylon 22.23 Z80 D-27850 16 Ce60 D-28260
Flat 100
22.23 Z120 D-27866 16 Ce80 D-28276
22.23 Z36 D-27872 16 Ce120 D-28282
22.23 Z40 D-27888 22.23 Ce40 D-28298
22.23 Ce60 D-28307
125 22.23 Z60 D-27894 115
22.23 Ce80 D-28313
22.23 Z80 D-27903
22.23 Ce120 D-28329
22.23 Z120 D-27919 Fiber Glass Angled
22.23 Ce40 D-28335
22.23 Z36 D-27925 22.23 Ce60 D-28341
125
22.23 Z40 D-27931 22.23 Ce80 D-28357
180 22.23 Z60 D-27947 22.23 Ce120 D-28363
22.23 Z80 D-27953 22.23 Ce40 D-28379
22.23 Ce60 D-28385
22.23 Z120 D-27969 180
22.23 Ce80 D-28391
22.23 Ce120 D-28400
Material: Aluminum oxide 16 Ce40 D-28416
Application 16 Ce60 D-28422
100
Best 16 Ce80 D-28438
16 Ce120 D-28444
22.23 Ce40 D-28450
Better
22.23 Ce60 D-28466
115
22.23 Ce80 D-28472
Backing Backing Dia. Hole dia 22.23 Ce120 D-28488
Grit Part No. Fiber Glass Flat
Type Shape (mm) (mm) 22.23 Ce40 D-28494
16 A36 D-26973 22.23 Ce60 D-28503
16 A40 D-26989 125
22.23 Ce80 D-28519
100 16 A60 D-26995 22.23 Ce120 D-28525
16 A80 D-27006 22.23 Ce40 D-28531
16 A120 D-27012 22.23 Ce60 D-28547
22.23 A36 D-27028 180
22.23 Ce80 D-28553
22.23 A40 D-27034 22.23 Ce120 D-28569
115 22.23 A60 D-27040
22.23 A80 D-27056

Fiber Glass
22.23 A120 D-27062 Material: Silicon carbide
Angled 22.23 A36 D-27078
22.23 A40 D-27084
125 22.23 A60 D-27090
22.23 A80 D-27109 Application
Best
22.23 A120 D-27115
22.23 A36 D-27121
22.23 A40 D-27137
180 22.23 A60 D-27143
22.23 A80 D-27159
Backing Backing Dia. Hole dia
22.23 A120 D-27165 Grit Part No.
Type Shape (mm) (mm)
16 A36 D-27171 16 C36 D-27975
16 A40 D-27187 16 C40 D-27981
100 16 A60 D-27193 100 16 C60 D-27997
16 A80 D-27202 16 C80 D-28008
16 A120 D-27218 16 C120 D-28014
22.23 A36 D-27224 22.23 C36 D-28020
22.23 A40 D-27230 22.23 C40 D-28036
115 22.23 A60 D-27246 115 22.23 C60 D-28042
22.23 A80 D-27252 22.23 C80 D-28058
22.23 A120 D-27268 22.23 C120 D-28064
Fiber Glass Flat Fiber Glass Flat
22.23 A36 D-27274 22.23 C36 D-28070
22.23 A40 D-27280 22.23 C40 D-28086
125 22.23 A60 D-27296 125 22.23 C60 D-28092
22.23 A80 D-27305 22.23 C80 D-28101
22.23 A120 D-27311 22.23 C120 D-28117
22.23 A36 D-27327 22.23 C36 D-28123
22.23 A40 D-27333 22.23 C40 D-28139
180 22.23 A60 D-27349 180 22.23 C60 D-28145
22.23 A80 D-27355 22.23 C80 D-28151
22.23 A120 D-27361 22.23 C120 D-28167
 Backing Backing Dia. Hole dia
Type Shape (mm) (mm)
Grit Part No. Flap Disc Economy type
22.23 C80 D-28173 Material: Aluminum oxide
22.23 C120 D-28189
Flat 115
Nylon 22.23 C180 D-28195
22.23 C320 D-28204
Application
22.23 C80 D-28210
Best
22.23 C120 D-28226
180
22.23 C180 D-28232
22.23 C320 D-28248 Better

Flap Disc Economy type Backing Backing Dia. Hole dia

Grit Part No.
Material: Zirconia aluminum Type Shape (mm) (mm)
16 A40 D-63395

Application 16 A60 D-63404

100
Best 16 A80 D-63410
16 A120 D-63426

Better 22.23 A40 D-63432

22.23 A60 D-63448
115
22.23 A80 D-63454
Backing Backing Dia. Hole dia
Grit Part No. 22.23 A120 D-63460
Type Shape (mm) (mm)
Fiber Glass Angled
22.23 Z36 D-53718 22.23 A40 D-63476
22.23 Z40 D-53724 22.23 A60 D-63482
125
100 22.23 Z60 D-53730 22.23 A80 D-63498
22.23 Z80 D-53746
22.23 A120 D-63507
22.23 Z120 D-53752
22.23 A40 D-63513
22.23 Z36 D-53768
22.23 A60 D-63529
22.23 Z40 D-53774 180
22.23 A80 D-63535
Fiber Glass Angled 125 22.23 Z60 D-53780
22.23 Z80 D-53796 22.23 A120 D-63541

22.23 Z120 D-53805

22.23 Z36 D-53811 Multi-disc
22.23 Z40 D-53827 For grinding, sanding and
180 22.23 Z60 D-53833 polishing concrete, marble and stone.
22.23 Z80 D-53849
22.23 Z120 D-53855

Flap Disc Economy type

Material: Zirconia aluminum
More economy type. Dia (mm) Hole dia(mm) Grit Part No.

100 16 C24 A-90130

115 22.23 C24 A-90249

Application
Best

Better

Backing Backing Dia. Hole dia

Grit Part No.
Type Shape (mm) (mm)
16 Z40 D-63703
16 Z60 D-63719
100
16 Z80 D-63725
16 Z120 D-63731
22.23 Z40 D-63747
22.23 Z60 D-63753
Fiber Glass Angled 115
22.23 Z80 D-63769
22.23 Z120 D-63775
22.23 Z40 D-63781
22.23 Z60 D-63797
125
22.23 Z80 D-63806
22.23 Z120 D-63812
22.23 Z40 D-63828
22.23 Z60 D-63834
180
22.23 Z80 D-63840
22.23 Z120 D-63856
Accessories 139

Strip Disc

Structure
Special tool for stripping work

Cutting
Grit (SiC)
It is covered with glue with Sic (Silicon Carbide), so it
enables you to grind quickly with less power.

Reciprosawing
Jigsaw /
Fiber
Entangled fiber acts at a cushion material and prevents
from grinding too much and scratching steel.

Brushing
Features

Bonded Abrasive
The surface condition of strip disc is the finest.

Coated Abrasive
Multi Tool

Strip disc Flap Wheel Grinding Wheel

Application

*Removing Paint *Removing Rust *Removing blue weld discoloration

Strip Disc Surface Conditioning Flap Disc series
Removing Paint, Removing Rust, Removing blue weld discoloration
Application

Color Type Speed Life

Black

Standard 100% 100% Backing Backing Dia. Hole dia

Grit Part No.
Type Shape (mm) (mm)
16 Coarse B-40711
Purple 16 Medium B-40727
100
Long life 94% 130% 16 Fine B-40733
16 Very Fine B-40749
22.23 Coarse B-40755

Fiber Glass Angled 22.23 Medium B-40761

Strip Disc 115
22.23 Fine B-40777
22.23 Very Fine B-40783
22.23 Coarse B-40799
22.23 Medium B-40808
125
22.23 Fine B-40814
Application
22.23 Very Fine B-40820
22.23 Coarse B-40836
22.23 Medium B-40842
180
22.23 Fine B-40858
Backing Dia. Hole dia
Color Part No. 22.23 Very Fine B-40864
Type (mm) (mm)
Black 100 16 B-28961 16 Coarse B-40870
115 22.23 B-28977 16 Medium B-40886
100
125 22.23 B-28983 16 Fine B-40892
180 22.23 B-28999 16 Very Fine B-40901
Fiber Glass
Purple
p 100 16 B-29000 22.23 Coarse B-40917
115 22.23 B-29016 22.23 Medium B-40923
115
125 22.23 B-29022 Fiber Glass Flat 22.23 Fine B-40939
180 22.23 B-29038 22.23 Very Fine B-40945
Black 100 16 B-29044 22.23 Coarse B-40951
115 22.23 B-29050 22.23 Medium B-40967
125
125 22.23 B-29066 22.23 Fine B-40973
180 22.23 B-36239 22.23 Very Fine B-40989
Nylon
Purple 100 16 B-36245 22.23 Coarse B-40995
115 22.23 B-36251 22.23 Medium B-41006
180
125 22.23 B-36267 22.23 Fine B-41012
180 22.23 B-36273 22.23 Very Fine B-41028
Flap wheel Dia. (inch) T (inch) Shank (inch) Grit Part No.
40 B-37312
60 B-37328
2'' 1-1/2'' 1/4'' 80 B-37334
Application
100 B-37340
120 B-37356
40 B-37362
Dia. (mm) T (mm) Shank (mm) Grit Part No. 60 B-37378
40 B-36762 2'' 2'' 1/4'' 80 B-37384
60 B-36778 100 B-37390
25.4 25.4 6 80 B-36784 120 B-37409
100 B-36790 40 B-37415
120 B-36809 60 B-37421
40 B-36815 2-1/2'' 1'' 1/4'' 80 B-37437
60 B-36821 100 B-37443
38.1 25.4 6 80 B-36837 120 B-37459
100 B-36843 40 B-37465
120 B-36859 60 B-37471
40 B-36865(EN) 3'' 1'' 1/4'' 80 B-37487
60 B-36871(EN) 100 B-37493
50.8 25.4 6 80 B-36887(EN) 120 B-37502
100 B-36893(EN) 40 B-37518
120 B-36902(EN) 60 B-37524
40 B-36918(EN) 3'' 2'' 1/4'' 80 B-37530
60 B-36924(EN) 100 B-37546
50.8 38.1 6 80 B-36930(EN) 120 B-37552
100 B-36946(EN)
120 B-36952(EN)
40 B-36968(EN)
Fiber sanding disc
Use with backing pad.
60 B-36974(EN)
50.8 50.8 6 80 B-36980(EN)
100 B-36996(EN)
120 B-37007(EN)
*For stone (wet), For Model: PK5001C, PK5011C only
40 B-37013(EN)
**For Model: GV6010 only
60 B-37029(EN)
Dia. (mm) Grit Per pkg. Part No.
63.5 25.4 6 80 B-37035(EN)
C24 10 794104-5
100 B-37041(EN)
C30 10 794105-3
120 B-37057(EN) 115 C50 10 794106-1
40 B-37063(EN) C80 10 794107-9
60 B-37079(EN) C120 10 794108-7
76 25.4 6 80 B-37085(EN) A50 5 794319-4
100 B-37091(EN) 125 A80 5 794320-9
A120 5 794321-7
120 B-37100(EN)
*C24 10 B-14526
40 B-37116(EN)
*C50 10 B-14532
60 B-37122(EN) 125
*C60 10 B-14548
76 50.8 6 80 B-37138(EN) *C120 10 B-14554
100 B-37144(EN) C24 10 794096-8
120 B-37150(EN) C30 10 794097-6
C50 10 794098-4
125
C80 10 794099-2
Dia. (inch) T (inch) Shank (inch) Grit Part No. C120 10 794100-3
40 B-37166 **C50 10 794086-1
60 B-37172 150 **C80 10 794088-7
1'' 1'' 1/4'' 80 B-37188 **C120 10 794090-0
100 B-37194 C24 10 794070-6
C30 10 794071-4
120 B-37203
C50 10 794072-2
40 B-37219 150
C80 10 794073-0
60 B-37225 C100 10 794219-8
1-1/2'' 1'' 1/4'' 80 B-37231 C120 10 794074-8
100 B-37247 C16 10 794091-8
120 B-37253 C20 10 794092-6
40 B-37269 C24 10 794093-4
C30 10 794218-0
60 B-37275 180
C50 10 794094-2
2'' 1'' 1/4'' 80 B-37281
C80 10 794095-0
100 B-37297 C100 10 794220-3
120 B-37306 C120 10 794221-1
 Disc dia.
Abrasive disc (mm)
Grit Per pkg. Part No.
(hook & loop type)
Pre-punched (15 hole) for Wood
For Model: BO6030, BO6040, BO6050
A40 10 B-51415
A60 10 B-51421
Disc dia.
Grit Per pkg. Part No. A80 10 B-51437
(mm)
Pre-punched (8 hole) for Wood A100 10 B-51443
For Model: BO5030, BO5031, BO5040, BO5041 150 A120 10 B-51459
10 D-54134 A180 10 B-51465
A40 A240 10 B-51471
50 D-54673
10 D-54140 A320 10 B-51487
A60 A400 10 B-51493
50 D-54689
10 D-54156 Pre-punched (15 hole) for Paint
A80 For Model: BO6030, BO6040, BO6050
50 D-54695
10 D-54162 *Additional coat
A100 *A40 10 B-51502
50 D-54704
10 D-54178 *A60 10 B-51518
125 A120 *A80 10 B-51524
50 D-54710
10 D-54184 *A100 10 B-51530
A150 150 *A120 10 B-51546
50 D-54726
10 D-54190 *A180 10 B-51552
A180 *A240 10 B-51568
50 D-54732
10 D-54209 *A320 10 B-51574
A240 *A400 10 B-51580
50 D-54748
10 D-54215 Pre-punched (9 hole) for Dry wall
A320 For Model: DSL800
50 D-54754
Pre-punched (8 hole) for Paint *Additional coat
For Model: BO5030, BO5031, BO5040, BO5041 *A40 25 B-68389
*Additional coat *A80 25 B-68395
*WA60 10 794542-1 *A120 25 B-68404
*WA80 10 794543-9 225 *A150 25 E-02375
*WA120 10 794544-7 *A180 25 B-68410
*WA180 10 794545-5 *A220 25 E-02381
*WA240 10 794546-3 *A320 25 B-68426
*A40 10 D-65816
*A60 10 D-65822
125 *A80 10 D-65838
Abrasive Belt
*A100 10 D-65844
*A120 10 D-65850
*A150 10 D-65866
*A180 10 D-65872
*A240 10 D-65888
*A320 10 D-65894
*A400 10 D-65903
Pre-punched (9 hole) for Paint
For Model: BO6030, BO6040 Sanding arm Assembly
*Additional coat For Model: 9032
*WA40 10 794607-9 6mm: 125157-7, 9mm: 125158-5, 13mm: 125159-3
*WA60 10 794608-7 Belt Size(mm) Grit Per pkg. Part No.
*WA80 10 794609-5 For Model: 9032
150 *WA120 10 794610-0 A40 10 A-34512
*WA180 10 794611-8 A60 10 A-34528
*WA240 10 794612-6 6 x 533 A80 10 A-34534
*WA400 10 794613-4 A100 10 A-34540
Pre-punched (15 hole) for Wood A120 10 A-34556
For Model: BO6030, BO6040, BO6050 A40 10 A-34447
10 D-54586 A60 10 A-34453
A40
50 D-54760 9 x 533 A80 10 A-34469
10 D-54592 A100 10 A-34475
A60
50 D-54776 A120 10 A-34481
10 D-54601 A40 10 A-34562
A80
50 D-54782 A60 10 A-34578
10 D-54617 13 x 533 A80 10 A-34584
A100
50 D-54798 A100 10 A-34590
10 D-54623 A120 10 A-34609
150 A120
50 D-54807 For Model: 9031
10 D-54639 A40 5 D-67066
A150
50 D-54813 A60 5 D-67072
10 D-54645 A80 5 D-67088
A180
50 D-54829 A100 5 D-67094
30x533
10 D-54651 A120 5 D-67103
A240
50 D-54835 A150 5 D-67119
10 D-54667 A180 5 D-67125
A320
50 D-54841 A240 5 D-67131
 Belt Size(mm) Grit Per pkg. Part No. Abrasive paper
For Model: 9910, 9911
A40 3 D-59184
A60 3 D-59190
A80 3 D-59209
A100 3 D-59215
76 x 457
A120 3 D-59221
A150 3 D-59237
A180 3 D-59243
A240 3 D-59259
For Model: 9902, 9903
A40 3 D-59265
A60 3 D-59271
A80 3 D-59287 *Additional coat
A100 3 D-59293 Paper Size(mm) Grit Per pkg. Part No.
A120 3 D-59302 Pre-punched
A150 3 D-59318
A180 3 D-59324 For Model: BO3711, BO3710
A240 3 D-59330 *WA60 10 A-31245
76 x 533
WA40 10 794119-2 *WA80 10 A-31251
WA60 10 794120-7 *WA120 10 A-31267
WA80 10 794121-5 *WA180 10 A-31273
WA100 10 794122-3 *WA240 10 A-31289
WA120 10 794123-1 93 x 228 A80 10 D-65252
WA150 10 794124-9
A100 10 D-65268
WA180 10 794225-3
A120 10 D-65274
WA240 10 794125-7
A180 10 D-65280
For Model: 9920, 9924DB
A240 10 D-65296
A40 3 D-67147
A320 10 D-65305
A60 3 D-67153
Pre-punched hook & loop
A80 3 D-67169
For Model:
A100 3 D-67175
A120 3 D-67181 BO4555, BO4565
A150 3 D-67197 A40 10 D-58665
A180 3 D-67206 A60 10 D-58671
A240 3 D-67212 A80 10 D-58687
76 x 610
WA40 10 794237-6 A100 10 D-58693
WA60 10 794238-4 114 x 102 A120 10 D-58702
WA80 10 794239-2 A150 10 D-58718
WA100 10 794240-7 A180 10 D-58724
WA120 10 794241-5 A240 10 D-58730
WA150 10 794242-3 A320 10 D-58746
WA180 10 794243-1 Pre-punched hook & loop
WA240 10 794244-9 For Model:
For Model: 9401, 9402. 9403, 9404 BO4510H, BO4558, BO4556, BO4555,BO4557
A40 3 D-59346 A80 10 D-65311
A60 3 D-59352
A100 10 D-65327
A80 3 D-59368
A120 10 D-65333
A100 3 D-59374 114 x 140
A180 10 D-65349
A120 3 D-59380
A240 10 D-65355
A150 3 D-59396
A320 10 D-65361
A180 3 D-59405
A240 3 D-59411 Pre-punched hook & loop
100 x 610 For Model:
WA40 5 794133-8
WA60 5 794134-6 BO4900, BO4900V, BO4901, 9046
WA80 5 794135-4 *WA60 5 A-14130
WA100 5 794136-2 *WA80 5 A-14146
WA120 5 794137-0 *WA100 5 A-14152
WA150 5 794138-8 115 x 232 *WA120 5 A-14168
WA180 5 794222-9 *WA150 5 A-14174
WA240 5 794139-6 *WA180 5 A-14180
*WA240 5 A-14196
Pre-punched
For Model:
BO4900, BO4900V, BO4901, 9046
*WA60 10 A-14065
*WA80 10 A-14071
*WA100 10 A-14087
115 x 280 *WA120 10 A-14093
*WA150 10 A-14102
*WA180 10 A-14118
*WA240 10 A-14124
Abrasive paper 230mm x 280mm (9" x 11") Abrasive paper (9" x 11")
One-star range
How to use

for Wood
For Model:
All Finishing Sander, Handsanding
Paper Size(mm) Grit Per pkg. Part No.
40 50 D-51683
60 50 D-51699
80 50 D-51708
1/2 sheet 1/3 sheet 1/4 sheet
100 50 D-51714
120 50 D-51720
150 50 D-51736
180 50 D-51742
240 50 D-51758
320 50 D-56873
400 50 D-56889
230 x 280
40 10 D-66313
60 10 D-66329
80 10 D-66335
100 10 D-66341
BO4900 etc BO3710 etc BO4555 etc
120 10 D-66357
150 10 D-66363
Stearted aluminum oxide Abrasive paper (9" x 11") 180 10 D-66379
Two-star range 240 10 D-66385
320 10 D-66391
400 10 D-66400

Multipurpose for Mortar

For Model:
All Finishing Sander, Handuse For Model:
Paper Size(mm) Grit Per pkg. Part No. All Finishing Sander, Handsanding
80 100 D-60698 60 50 D-56530
100 100 D-60707 80 50 D-56546
120 100 D-60713 100 50 D-56552
150 100 D-60729 120 50 D-56568
180 100 D-60735 150 50 D-56574
220 100 D-60741 180 50 D-56580
240 100 D-60757 240 50 D-56596
230 x 280
280 100 D-60763 60 10 D-66416
320 100 D-60779 80 10 D-66422
360 100 D-60785 100 10 D-66438
230 x 280 400 100 D-60791 120 10 D-66444
500 100 D-60800 150 10 D-66450
600 100 D-60816 180 10 D-66466
800 100 D-60822 240 10 D-66472
80 10 D-66086
100 10 D-66092
120 10 D-66101 for Metal
150 10 D-66117 For Model:
180 10 D-66123
All Finishing Sander, Handsanding
220 10 D-66139
240 10 D-66145 36 50 D-56677
40 50 D-56683
60 50 D-56699
80 50 D-56708
100 50 D-56714
120 50 D-56720
150 50 D-56736
180 50 D-56742
240 50 D-56758
230 x 280
36 10 D-66488
40 10 D-66494
60 10 D-66503
80 10 D-66519
100 10 D-66525
120 10 D-66531
150 10 D-66547
180 10 D-66553
240 10 D-66569
Waterproof Abrasive paper (9" x 11") Wool bonnet
One-star range

For Model:
All Finishing Sander, Handsanding Model No. Size (mm) Part No.
In case of these items are used with power tools, dry use only. PV7001C, PV7000C, 9207SPB,
180 794176-0
9218PB/L, 9227C/B
Paper Size(mm) Grit Per pkg. Part No.
60 50 D-58936
80 50 D-58942 Wool bonnet double side
100 50 D-58958
120 50 D-58964
150 50 D-58970
180 50 D-58986
220 50 D-58992
280 50 D-59003
320 50 D-59019
Model No. Size (mm) Type Part No.
400 50 D-59025
PV7001C, PV7000C,
600 50 D-59031 230 For Rough fihishing D-70873
9227C/B, 9237C/B, SA7000C
800 50 D-59047 PV7001C, PV7000C,
230 For Bright fihishing D-70889
1000 50 D-59053 9227C/B, 9237C/B, SA7000C
1200 50 D-56867
1500 50 D-59069
2000 50 D-59075
Adapter for Wool Bonnet Double Side
230 x 280
60 10 D-66151
80 10 D-66167
100 10 D-66173
120 10 D-66189
150 10 D-66195
180 10 D-66204
220 10 D-66210 Model No. Shank Size Part No.
280 10 D-66226 PV7001C, PV7000C, 9227C/B, 9237C/B,SA7000C M14 D-56960
320 10 D-66232 PV7000C, 9227C/B, 9237C/B M16 D-57043
400 10 D-66248
PV7000C, 9227C, 9237C, SA7000C 5/8"-11 D-57087
600 10 D-66254
800 10 D-66260
1000 10 D-66276 Felt Pad
1200 10 D-66282 (hook & loop type)
1500 10 D-66298 (For removing wax)
2000 10 D-66307

*When use 100mm size felt pad, use suitable pad for PO5000C
Wool Pad
Model No. Disc dia. (mm) Part No.
(hook & loop type)
(For high gloss polishing) PO5000C 100 197916-9
DBO180, DBO140, BO5031, BO5041,
125 196152-4
DPO500, DPO600, PO5000C
BO6030, BO6050, DPO500, DPO600,
*When use 100mm size wool pad, use suitable pad for PO5000C 150 193288-0
PO6000C
Model No. Disc dia. (mm) Part No.
PO5000C 100 197918-5
PO5000C,DPO500 100 D-67000
Sponge pad
(Hook & loop type)
PO5000C 125 197920-8
BO5030,BO5031,BO5041,
125 D-70867
BO5031,PO5000C,DPO500
BO6030, BO6050, PO6000C 150 794619-2
BO6030, BO6050, PO6000C,DPO600 150 D-65735
DBO180, DBO140, BO5031, BO5041 140 794560-9
(Use with Backing pad and Sleeve18) *When use 100mm size sponge, use suitable pad for PO5000C
9227C/B, 9237C/CB, PV7001/C, PV7000C 180 192629-7 Model No. Size (mm) Part No.
DPO500, DPO600, PO5000C, PO6000C 100 197912-7
DBO180, DBO140, BO5031, BO5041,
125 794558-6
DPO500, PO5000C
BO6030, DPO600, PO6000C, BO6050 150 197914-3

(Use with Backing pad)

9227C/CB, 9237C/CB, PV7001/C,
190 193470-1
PV7000C
Sponge pad Rubber pad
(Hook & loop type) Use with pre-punched abrasive disc.

Color & Application Model No. Size Type Part No.

Hard (For coarse
150mm 197315-5
sanding)
Coarse Soft (For general
150mm 197314-7
BO6050 sanding)
Color: Orange
Use: Suitable for taking small scratches Super Soft (For fine
150mm 197316-3
sanding)
130mm Hard (For polishing) 197317-1
Middle BO5030, BO5031,
123mm - 743081-8
Color: Blue BO5040, BO5041
Use: Suitable for finishing 100mm  197926-6
DPO500, DPO600,
125mm  197923-2
PO5000C, PO6000C
Fine 150mm  197929-0
Color: Black
Use: Suitable for wax coating
Backing pad
(Hook & loop type)
(Use with Wool pad and Sleeve18 or Sponge pad)

Sponge type
Flat
Feature: Full contact surface Model No. Spindle thread Part No.
e
Use: Suitable for large, flat, panel M14 x 2 (DIN) 743053-3
9227C/B, PV7001/C, PV7000C,
5/8'' 743052-5
SA7000C
M16 743054-1
Wave
Feature: Air flow between the
he pad and the paint.
Use: Suitable for bumper made with resin.

100mm Diamond polishing pad

(Hook & loop type)
8 pads assortment (1 each) D-15805

For Model㸸
DPO500, DPO600, PO5000C, PO6000C
*When use 100mm size sponge, use suitable pad for PO5000C
Type Size Application Part No. For Model:
PW5000C, PW5001C
Coarse (Orange) D-62505
Color Grit Part No.
100mm Middle (Blue) D-62533
Blue 50 D-15584
Fine (Black) D-62561
Yellow 100 D-15590
Coarse (Orange) D-62511
Orange 200 D-15609
Flat 125mm Middle (Blue) D-62549
Red 400 D-15615
Fine (Black) D-62577
Dark green 800 D-15621
Coarse (Orange) D-62527
Light green 1500 D-15637
150mm Middle (Blue) D-62555

Fine (Black) D-62583 Brown 3000 D-15643

Coarse (Orange) D-62599 Green Buff (Finishing) D-15659

100mm Middle (Blue) D-62620

Fine (Black) D-62658

Coarse (Orange) D-62608

Wave 125mm Middle (Blue) D-62636

Fine (Black) D-62664

Coarse (Orange) D-62614

150mm Middle (Blue) D-62642

Fine (Black) D-62670

ACCESSORIES
Multi Tool

Tungsten carbide grit, #30 Tungsten carbide grit, #30 Diamond grit, #40 Serrated edge
40

Sharp blade Sharp blade Delta plate Sanding plate

Pointed teeth Japan teeth

148 Multi Tool
Color coding for application
(Wood/Metal)
Drilling

Metal Wood & Wood Grout Multi

(Masonry)

Rating Suitability for application: Metal Abrasive Material

Drilling

AA = Especially Suitable
A = Suitable Wood & Metal
n. r = No Rating Wood Metal
Teeth Non
Width Blade Curve Japan Plaster Sheet Soft
per Wood Plywood Chipboard ferrous Stainless
(mm) Material Teeth Teeth board metal
metal nail
inch
Fastening

Sawing
TMA045 85 18 BiM AA AA AA A AA A n. r AA
TMA046 100 15 BiM AA AA AA A A n. r n. r n. r
TMA049 85 18 HCS A A n. r n. r n. r n. r n. r n. r
Screw Bit Sets
Drill and

TMA064 85 18 BiM AA AA AA AA AA A n. r AA

Plung Cutting
TMA047 32 20 BiM AA AA AA A A AA n. r AA
TMA048 65 20 BiM AA AA AA AA A A n. r AA
Cutting

TMA050 24 18 HCS A A A n. r n. r n. r n. r n. r
TMA051 32 18 HCS A A A n. r n. r n. r n. r n. r
TMA052 65 20 HCS A A A n. r n. r n. r n. r n. r
TMA053 32 14 BiM AA AA AA A n. r n. r n. r n. r
Reciprosawing

TMA054 32 14 HCS A A n. r n. r n. r n. r n. r n. r
Jigsaw /

TMA055 65 14 BiM AA AA AA A n. r n. r n. r n. r
TMA056 65 14 HCS A A n. r n. r n. r n. r n. r n. r
TMA057 10 20 BiM AA AA AA AA AA AA n. r AA
TMA058 20 20 BiM AA AA AA AA AA AA n. r AA
TMA059 32 20 BiM A A A AA AA AA n. r AA
Brushing

TMA060 20 23 TC A A A AA AA AA n. r AA
TMA061 32 23 TC A A A AA AA AA AA AA
TMA079 45 23 TC A A A AA AA A A A
TMA080 32 20 TC A A A AA AA A A A
Bonded Abrasive

TMA081 53 14 BiM n. r A AA AA n. r n. r n. r A

Scraping
TMA065 52 - HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA066 52 - HCS n. r n. r n. r n. r n. r n. r n. r n. r
Coated Abrasive

Cutting
TMA063 100 - BiM n. r n. r n. r n. r n. r n. r n. r n. r
TMA067 28 - HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA082 12 - Stainless n. r n. r n. r n. r n. r n. r n. r n. r
TMA068 11 - HCS n. r n. r n. r n. r n. r n. r n. r n. r
Multi Tool

TMA070 85 - Diamond n. r n. r n. r A n. r n. r n. r n. r

Removing
TMA074 70 - TC #40 n. r n. r n. r A n. r n. r n. r n. r
TMA076 32 - TC #40 n. r n. r n. r n. r n. r n. r n. r n. r
Diamond

TMA077 32 - TC #100 n. r n. r n. r n. r n. r n. r n. r n. r

Routing
TMA069 85 - TC #30 n. r n. r n. r A n. r n. r n. r n. r
TMA071 70 - TC #50 n. r n. r n. r A n. r n. r n. r n. r
Routering
Planing /

TMA072 85 - TC #40 n. r n. r n. r A n. r n. r n. r n. r
TMA074 70 - TC #40 n. r n. r n. r n. r n. r n. r n. r n. r
TMA075 32 - TC #50 n. r n. r n. r n. r n. r n. r n. r n. r

Sanding
OPE

TMA073 78 - TC #20 n. r n. r n. r n. r n. r n. r n. r n. r
TMA076 32 - TC #40 AA n. r n. r n. r n. r n. r n. r n. r
TMA077 32 - TC #100 AA n. r n. r n. r n. r n. r n. r n. r
TMA083 90 - TC #20 A A A n. r n. r n. r n. r n. r
Miscellaneous

TMA084 90 - TC #40 A A A n. r n. r n. r n. r n. r
TMA085 90 - TC #60 AA AA AA n. r n. r n. r n. r n. r
TMA086 90 - TC #100 AA AA AA n. r n. r n. r n. r n. r
 149

Rating Suitability for application:

AA = Especially Suitable
A = Suitable
n. r = No Rating Multi Material Grout Abrasive

Teeth Epoxy, Porous

Width Blade Curve Japan Linoleum Carpet Insulation Soft joint Soft wall Mortar Tile
per Fiber Concrete
(mm) Material Teeth Teeth Carpet adhensive material material tiles adhensive
inch glass Soft brick

Sawing
TMA045 85 18 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA046 100 15 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA049 85 18 HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA064 85 18 BiM AA n. r n. r n. r n. r n. r n. r n. r

Plung Cutting
TMA047 32 20 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA048 65 20 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA050

Cutting
24 18 HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA051 32 18 HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA052 65 20 HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA053 32 14 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA054 32 14 HCS n. r n. r n. r n. r n. r n. r n. r n. r

Reciprosawing
Jigsaw /
TMA055 65 14 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA056 65 14 HCS n. r n. r n. r n. r n. r n. r n. r n. r
TMA057 10 20 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA058 20 20 BiM A n. r n. r n. r n. r n. r n. r n. r
TMA059 32 20 BiM A n. r n. r n. r n. r n. r n. r n. r

Brushing
TMA060 20 23 TC AA n. r n. r n. r n. r AA n. r n. r
TMA061 32 23 TC AA n. r n. r n. r n. r AA n. r n. r
TMA079 45 23 TC A n. r n. r n. r n. r n. r n. r n. r
TMA080 32 20 TC A n. r n. r n. r n. r n. r n. r n. r

Bonded Abrasive
TMA081 53 14 BiM n. r n. r n. r n. r n. r n. r n. r n. r

Scraping
TMA065 52 - HCS n. r n. r AA n. r n. r n. r n. r A
TMA066 52 - HCS n. r n. r AA n. r n. r n. r n. r n. r

Coated Abrasive
Cutting
TMA063 100 - BiM n. r AA n. r AA n. r n. r n. r n. r
TMA067 28 - HCS n. r n. r n. r n. r AA n. r n. r n. r
TMA082 12 - Stainless n. r n. r n. r n. r AA n. r n. r n. r
TMA068 11 - HCS n. r AA n. r AA n. r n. r n. r n. r
TMA070 85 - Diamond AA n. r n. r n. r AA n. r AA n. r Multi Tool

Removing
TMA074 70 - TC #40 AA n. r A n. r n. r n. r n. r AA
TMA076 32 - TC #40 n. r n. r A n. r n. r n. r n. r A
TMA077 32 - TC #100 n. r n. r A n. r n. r n. r n. r A

Routing
TMA069 85 - TC #30 AA n. r n. r n. r AA n. r AA n. r
TMA071 70 - TC #50 AA n. r n. r n. r n. r AA A n. r
TMA072 85 - TC #40 A n. r n. r n. r n. r AA A n. r
TMA074 70 - TC #40 n. r n. r n. r n. r AA n. r AA n. r
TMA075 32 - TC #50 AA n. r n. r n. r n. r AA A AA

Sanding
TMA073 78 - TC #20 n. r n. r n. r n. r n. r n. r n. r AA
TMA076 32 - TC #40 n. r n. r n. r n. r n. r n. r n. r n. r
TMA077 32 - TC #100 n. r n. r n. r n. r n. r n. r n. r n. r
TMA083 90 - TC #20 n. r n. r n. r n. r n. r n. r n. r AA
TMA084 90 - TC #40 n. r n. r n. r n. r n. r n. r n. r AA
TMA085 90 - TC #60 n. r n. r n. r n. r n. r n. r n. r n. r
TMA086 90 - TC #100 n. r n. r n. r n. r n. r n. r n. r n. r
 Plung-cutting saw blades

Sawing
For Model: Bow Shape plunge cut saw blade 32
DTM51, DTM50, DTM41, DTM40, TM3010C, TM3000C TMA047
Size: W= width (mm), L=length (mm)

Application/ Recommended Use

Wood and Metal / Suitable for Precisely plunge cut
Plunge cut in hardwood
Size (mm) Type Per pkg. Part No.

Segment saw blade 85 32 x 50 BiM, Wood&Metal 1 B-64814

TMA045 32 x 50 BiM, Wood&Metal 5 B-64814-5
32 x 50 BiM, Wood&Metal 20 B-64814-20

Bow Shape plunge cut saw blade 65

Application/ Recommended Use TMA048
Wood&Metal/ Suitable for flush cutting
Cut-off door frame to length on the floor
Cut-out parquet/laminate flooring
Cut-off smaller mouldings to length
Diameter (mm) Type Per pkg. Part No. Application/ Recommended Use
Wood and nails/ Suitable for plunge cutting
85 BiM, Wood&Metal 1 B-64799 Cutting wood with nails
Cutting a door frame to length
Plunge cuts in laminated panels.
Segment saw blade 100 Size (mm) Type Per pkg. Part No.
TMA046 65 x 40 BiM, Wood&Metal 1 B-64820
65 x 40 BiM, Wood&Metal 5 B-64820-5

Application/ Recommended Use

Plunge cut saw blade 24
Wood&Metal/ Suitable for deep cutting TMA050
Cut-off door frame to length on the floor
Cut-out parquet/laminate flooring
Cut-off smaller mouldings to length
Diameter (mm) Type Per pkg. Part No.
Application/ Recommended Use
100 BiM, Wood&Metal 1 B-64808 Wood
Plunge-cut in softwood
Cutting a recess in furniture components
Flush cutting wooden components to length
Segment saw blade 85 Size (mm) Type Per pkg. Part No.
TMA049
24 x 50 HCS, Wood 1 B-64842

Bow Shape plunge cut saw blade 32

Application/ Recommended Use TMA051
Wood/ Suitable for flush cutting
Plunge-cut in solid wood
Cut-off plastic pipe(PVC) to length
Diameter (mm) Type Per pkg. Part No. Application/ Recommended Use
85 HCS, Wood 1 B-64836 Wood/ Suitable for Precisely plunge cut
Cutting a recess in furniture components
Plunge-cut in softwood
Size (mm) Type Per pkg. Part No.
Segment saw blade 85
TMA064 32 x 50 HCS, Wood 1 B-64858
32 x 50 HCS, Wood 5 B-64858-5
32 x 50 HCS, Wood 20 B-64858-20

Application/ Recommended Use

Non-ferrous metal, FRP, PVC / Suitable for corners.
Bow Shape plunge cut saw blade 65
Plunge cut in plasterboard or cement-bonded fiber boards TMA052
Cut-off smaller mouldings to length
Cutting recesses in epoxy/glass fiber reinforced plastic
Diameter (mm) Type Per pkg. Part No.
Application/ Recommended Use
85 BiM-TiN, Multi Material 1 B-64973
Wood/ Suitable for plunge cutting
Flush cutting wooden components
Size (mm) Type Per pkg. Part No.
65 x 40 HCS, Wood 1 B-64864
65 x 40 HCS, Wood 5 B-64864-5
Bow Shape plunge cut saw blade 32 Plunge cut saw blade 20
TMA053 TMA058

Application/ Recommended Use

Hard Wood/ Suitable for Precisely plunge cut
Plunge cut in hardwood Application/ Recommended Use
Cutting a recess in furniture components Metal/ Suitable for flush cutting in nails or copper pipe
Plunge cut in laminate panels Plunge cuts in plasterboard
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

32 x 50 BiM, Wood 1 B-64870 20 x 30 BiM, Metal 1 B-64923

32 x 50 BiM, Wood 20 B-64870-20 20 x 30 BiM, Metal 5 B-64923-5

Bow Shape plunge cut saw blade 32 Plunge cut saw blade 32
TMA054 TMA059

Application/ Recommended Use Application/ Recommended Use

Wood/ Suitable for Precisely plunge cut Metal/ Suitable for flush cutting in nails or copper pipe
Cutting a recess in furniture components Plunge cuts in plasterboard
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

32 x 50 HCS, Wood 1 B-64886 32 x 50 BiM, Metal 1 B-64939

32 x 50 HCS, Wood 5 B-64886-5 32 x 50 BiM, Metal 5 B-64939-5

Bow Shape plunge cut saw blade 65 TC Bar plunge cut saw blade 20
TMA055 TMA060

Application/ Recommended Use

Hard Wood/ Suitable for plunge cutting
Plunge cutting in laminated panels or hard wood Application/ Recommended Use
Cutting a recess in furniture components Metal/ Suitable for flush cutting in hardened screws and nails
Flush cutting wooden components Cutting stainless, aluminum, fiberglass, plasterboard
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

65 x 40 BiM, Wood 1 B-64892 20 x 40 TC/HM, Metal 1 B-64945

65 x 40 BiM, Wood 5 B-64892-5 20 x 40 TC/HM, Metal 5 B-64945-5

Bow Shape plunge cut saw blade 65 TC Bar plunge cut saw blade 32
TMA056 TMA061

Application/ Recommended Use

Wood/ Suitable for plunge cutting Application/ Recommended Use
Cutting a recess in furniture components Metal/ Suitable for flush cutting in hardened screws and nails
Flush cutting wooden components Cutting stainless, aluminum, fiberglass, plasterboard

Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

65 x 40 HCS, Wood 1 B-64901 32 x 40 TC/HM, Metal 1 B-64951

65 x 40 HCS, Wood 5 B-64901-5 32 x 40 TC/HM, Metal 5 B-64951-5

Plunge cut saw blade 10 TC Bar plunge cut saw blade 45

TMA057 TMA079

Application/ Recommended Use

Metal/ Suitable for flush cutting in nails or plasterboard Application/ Recommended Use
Filigree adjustment work on non-ferrous profiles Metal/ Suitable for flush cutting in hardened screws and nails
Plunge cuts in plasterboard Cutting stainless, aluminum, fiberglass, plasterboard
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.
10 x 30 BiM, Metal 1 B-64917 45 x 40 TC/HM, Metal 1 B-69755
TC Bar Bow Shape plunge cut saw blade 32 Cutting
TMA080

Application/ Recommended Use

Multi material/ Suitable for precisely plunge cut
Plunge cut plasterboard, fiberglass, epoxy, aluminum, stainless
Size (mm) Type Per pkg. Part No.
Serrated Seg Blade 100
TMA063
32 x 40 TC/HM, Multi Material 1 B-69761

Bow Shape plunge cut saw blade 53

TMA081 Application/ Recommended Use
Polystyrene, Rubber/ Suitable for insulation material
Flush cutting to length of protruding insulation material, especially polystyrene
Cut-out insulation panels to size
Cut soft materials ( cardboard, carpet, leather…)
Diameter (mm) Type Per pkg. Part No.
Application/ Recommended Use
Multi material/ Suitable for precisely and fast plunge cut in plasterboard 100 BiM 1 B-64967
1 Blade does the job of 2 (Plunge & Cut on). Cutting plasterboard, wood, epoxy
Size (mm) Type Per pkg. Part No.

53 x 40 BiM, Multi Material 1 B-69777 General Joint Cutter

TMA067

Scraping

Application/ Recommended Use

Cutting soft expansion joints
Cutting window putty
Cutting insulation materials
Size (mm) Type Per pkg. Part No.
28 x 40 HCS 1 B-65006
Scraper 52 Rigid 28 x 40 HCS 5 B-65006-5
TMA065

Universal purpose knife

TMA082

Application/ Recommended Use

Removing mortar or tile adhesive
Removing mortar and concrete residues Application/ Recommended Use
Removing hard, brittle carpet adhesive residues Cutting teaksealant, caulking material
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

52 x 26 HCS 1 B-64989 12 x 29 Stainless 1 B-69783

Scraper 52 Flexible Universal purpose knife

TMA066 TMA068

Application/ Recommended Use Application/ Recommended Use

Removing soft carpet adhesive residues Cutting insulation materials
Removing paint residues Cutting window putty
Removing silicone joints Cutting expansion joints
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

52 x 40 HCS 1 B-64995 11 x 24 HCS 1 B-65012

Routing and Rasping TC Seg Saw Blade 70
TMA071

Application/ Recommended Use

Routing extra-thin 1/16'' joints on wall tiles
Routing recesses in epoxy/glass fiber reinforced plastic
TC Remover Routing grooves in porous concrete, for laying concealed cables and pipes
TMA074 Diameter (mm) Type Per pkg. Part No.

70 TC/HM grit #50 1 B-65040

Application/ Recommended Use TC Seg Saw Blade 85

Routing joints on wall and floor tiles TMA072
Removing mortar or tile adhesive
Removing joints in the smallest of corners with the tungsten carbide tip
Size (mm) Type Per pkg. Part No.

70 TC/HM grit #40 1 B-65078

Application/ Recommended Use
Routing joints on floor and wall tiles
Routing smaller cut outs in soft wall tiles
TC Plunge Blade 32 Routing grooves in porous concrete
TMA075 Diameter (mm) Type Per pkg. Part No.

85 TC/HM grit #40 1 B-65056

Application/ Recommended Use Diamond Seg Saw blade

Plunge cut and rasping in fibreglass.
Deburr cut-out in fibreglass
Remove grouts in narrow corners or tide spaces
Size (mm) Type Per pkg. Part No.

32 x 30 TC/HM grit #50 1 B-65084

TC Sanding Pointer 32 Diamond Seg Saw blade 85

TMA076 TMA070

Application/ Recommended Use Application/ Recommended Use

Sanding paint in tight gap Cutout of soft wall tiles and FRP
Sanding parquet varnish in hard-to-reach areas Routing recesses in epoxy/glass fiber reinforced plastic
Sanding wood, wood-plastic composite and epoxy Routing joints on wall tiles
Size (mm) Type Per pkg. Part No. Diameter (mm) Type Per pkg. Part No.

32 x 50 TC/HM grit #40 1 B-65090 85 Diamond grit #40 1 B-65034

TC Sanding Pointer 32 Riff sanding

TMA077

Application/ Recommended Use

Sanding paint in tight gap TC Sanding Plate 78
Sanding parquet varnish in hard-to-reach areas
TMA073
Sanding wood, wood-plastic composite and epoxy
Diameter (mm) Type Per pkg. Part No.

32 x 50 TC/HM grit #100 1 B-65109

Application/ Recommended Use

Removing motar or tile adhesive
TC Seg Saw Blade 85 Removing carpet adhesive residues from a mineral surface
TMA069
Size (mm) Type Per pkg. Part No.

78 TC/HM grit #20 1 B-65062

Application/ Recommended Use 

Routing joints on wall and floor tiles
Smaller cutouts in soft wall tiles
Routing grooves in porous concrete, for laying concealed cables and pipes
Diameter (mm) Type Per pkg. Part No.

85 TC/HM grit #30 1 B-65028

TC Sanding Plate 90 Sanding pad
TMA083 TMA078

Application/ Recommended Use

Removing motar, tile adhesive, paint on figerglass
Removing carpet adhesive residues from a mineral surface
Size (mm) Type Per pkg. Part No. Size (mm) Type Per pkg. Part No.

90 TC/HM grit #20 1 B-69799 93 hook & loop 1 B-65115

TC Sanding Plate 90 Multi tool Starlock blade sets (with Tool box)
TMA084 The components of each set are packed in tool box complete.
Tool box can insert to the plastic case of TM3010C, DTM51and DTM41.

Application/ Recommended Use

Sanding in wood with paint, paint of fiberglass
Removing motar, tile adhesive, carpet adhesive residues from a mineral surface
Size (mm) Type Per pkg. Part No.

90 TC/HM grit #40 1 B-69808

Set contents Part No.

TC Sanding Plate 90
TMA085 TMA045, TMA047, TMA053, TMA058, TMA078 199542-0

Multi tool Starlock blade sets

Application/ Recommended Use
Tile Set
Sanding in wood, wood with paint roughly TMA058 Plunge cut saw blade 20
TMA065 Scraper 52 rigid
Size (mm) Type Per pkg. Part No. TMA069 HM Seg saw blade 85
TMA073 HM Sanding plate 78
90 TC/HM grit #60 1 B-69814
Part No.

B-67496
TC Sanding Plate 90
TMA086
Floor Set
TMA045 Segment saw blade 85
TMA048 Plunge cut saw blade 65
TMA051 Plunge cut saw blade 32
Application/ Recommended Use TMA066 Scraper 52 Flexible
Sanding in wood for fine surfaces Part No.
Size (mm) Type Per pkg. Part No. B-67505
90 TC/HM grit #100 1 B-69820

Plunge Cut Set

TMA045 Segment saw blade 85
TMA047 Plunge cut saw blade 32
TMA053 Bow plunge cut saw blade 32
TMA058 Plunge cut saw blade 20
Part No.

B-67480

Carpentry Set
TMA045 Segment saw blade 85
TMA047 Plunge cut saw blade 32
TMA053 Bow plunge cut saw blade 32
Sanding Pad x 2pcs
Part No.

B-67511
Abrasive delta paper Stone
Use with Sanding pad (B-65115)
(hook & loop type)
Wood / long-life
Suitable for coarse to gloss sanding of extremely hard materials such as stone or glass
Suitable for sanding wood, hard wood, chipboard, construction boards and metal
Paper Size (mm) Grit per pkg. Part No.
Paper Size (mm) Grit per pkg. Part No.
94 120 10 B-21749
94 60 10 B-21565
94 240 10 B-21755
94 80 10 B-21571
94 400 10 B-21761
94 100 10 B-21587
94 600 10 B-21777
94 120 10 B-21593
94 1200 10 B-21783
94 180 10 B-21602
120,240,400, 10
94 240 10 B-22931 94 B-21733
600,1200 (2pcs/each)
60,80,100, 10
94 B-21559
120,180 (2pcs/each)
Polishing fleece
Wood
Suitable for removing the rust of metal and the dirt of wood
Suitable for sanding wood and wooden materials
Paper Size (mm) Grit per pkg. Part No.
Paper Size (mm) Grit per pkg. Part No.
94 60 10 B-21624 94 Coarse / 100 1 B-21808

94 80 10 B-21630 94 Medium / 280 1 B-21799

94 100 10 B-22947 94 without grit 1 B-21814
94 120 10 B-21646
94 150 10 B-22953
Polishing felt
94 180 10 B-21652
94 240 10 B-21668
60,80,120, 10
94 B-21618 Suitable for pre-polishing very dirty or scratched surfaces
180,240 (2pcs/each)
80,100,120, 10 Paper Size (mm) Grit per pkg. Part No.
94 A-95853
150,180 (2pcs/each)
94 Hard 1 B-21820

Wood/ economy type

Suitable for sanding wood, wooden materials and metal

Paper Size (mm) Grit per pkg. Part No.

94 40 10 D-58578

94 60 10 D-58584

94 80 10 D-58590

94 100 10 D-58609

94 120 10 D-58615

94 150 10 D-58621

94 180 10 D-58637

94 240 10 D-58643

94 320 10 D-58659

Paint

Suitable for sanding paint, varnish or roughcast

Paper Size (mm) Grit per pkg. Part No.
94 60 10 B-21680
94 80 10 B-21696
94 100 10 B-21705
94 120 10 B-22969
94 240 10 B-21711
94 320 10 B-21727
60,80,100, 10
94 B-21674
240,320 (2pcs/each)
Multi tool papers applications
Rating Suitability for application:
AA = Especially Suitable
A = Suitable
n.r = No Rating

Glass fiber reinforced

Steel (mild steel /
Chipboard/MDF
Wood / Wooden

carbon steel)
hard wood
Roughcast

soft wood
materials

Plywood

Perspex
Varnish

Corian®

plastics
Granite
Marble
Stone
Metal

Glass
Paint

Filler
Product Application and
Grit
Rating On Each Material

Coarse 60
80
Medium 100
Wood / long-life n.r n.r n.r n.r AA AA AA AA AA AA A n.r n.r n.r n.r n.r n.r n.r
120
180
Fine
240
Coarse 60
80
Medium 100
Wood 120 n.r n.r n.r n.r AA A AA AA AA n.r n.r n.r n.r n.r n.r n.r n.r n.r
150
Fine 180
240
Coarse 60
80
Medium 100
Paint AA AA AA AA n.r n.r A n.r n.r A A n.r n.r n.r n.r n.r n.r n.r
120
240
Fine
320
Medium 120
240
Fine
Stone 400 A AA n.r n.r n.r n.r n.r n.r n.r n.r n.r A A A A A A A
600
Very fine
1200
Economy type
40
Coarse 60
80
100
Wood 120 A A n.r n.r AA AA AA AA A A A n.r n.r n.r n.r n.r n.r n.r
Medium
150
180
240
Fine
320
ACCESSORIES
Diamond

Thread / Dia Dia / Bore Max speed Wet

Dry Not permitted for face

grinding
158 Accessories
Diamond Wheels
(Wood/Metal)
Drilling

Segmented Type:
Most commonly used. Blade has slits and
layers of diamond are sintered on edges.
Cut faster than continuous rim type
and attain average cutting surface.
(Masonry)
Drilling

Segmented Wave Type:

Fastening

This wheel has slits like segmented wheel.

Each segment has many notches (Wave).
These notches assure;
• Fast cutting with less resistance.
• Smooth debris removal.
Screw Bit Sets

• Less loading on wheel.

Drill and

Corrugated Type:
Cutting

This wheel has notches around the Rim.

Has a characteristic between Continuous Rim
and Segmented Type. Has faster cutting
like Segmented Type. At the same time,
can attain cleaner surface like continuous
rim without broken edges.
Reciprosawing
Jigsaw /

Continuous Rim Type:

Has layer of diamond with uniform
Brushing

thickness around the entire rim.

Can attain clean surface even on crusty,
brittle materials. Cut with accuracy but not
as fast as segmented type wheel.
Bonded Abrasive

SPECIALIZED
Coated Abrasive

Electrodeposited Type:
Diamonds are electrodeposited and has more
exposure than bonded type.
Cuts faster and more efficient.
Multi Tool

Vacuum brazed Type:

Diamond

Diamonds are vacuum brazed and has more

exposure than bonded type.
Able to cut harder material.
It is longer life than electrodeposited type
because diamonds are held tightly.
Routering
Planing /

Crack Chaser:
Blade is thicker than regular blades.
OPE

Designed for repair the wall easily.

Miscellaneous
Diamond Wheel

(EN) : EN13236

AA: Specially suitable, A: Suitable

Ring
(10 pcs./set)
(mm)

Description (H)Outer Dia (D)Hole Dia Part No.

Ring 20 22.23 20 A-85248

Ring 16 20 16 A-86860

Material
Material No. 1
Engineering Block/
Smoothable
Hard concrete Granite Gneiss Carbonaceous Shale Sidewalk Slate Engineering Block
Engineering
Class 2

Material No. 2 Material No. 3

Concrete Block U-shaped Groove Sidewalk Block Cemented Tile Marble Unglazed Tile

Material No. 4 Material No. 5 Material No. 6 Material No. 7

Brick Aggregate Block French Tile Asphalt Tile Glass
Diamond Wheel for Concrete

Segmented
Four-star range

<Ideal for Concrete, Granite / Dry>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

115 1.6 7 22.23 - Blue AA AA AA A  115mm Grinder B-53780(EN)

125 1.6 7 22.23 - Blue AA AA AA A    125mm Grinder B-53796(EN)

Three-star range

<Ideal for Concrete / Dry>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
105 1.8 7 20 16 Gold  AA AA A A   100mm Grinder, 110mm Cutter A-88842
105 1.8 7.5 20 16 Gold  AA AA A    100mm Grinder, 110mm Cutter A-87149
105 1.7 7 20 5/8'' Blue  AA AA A A   100mm Grinder, 110mm Cutter A-90211
110 1.8 6 20 - Gold  AA AA A A   110mm Cutter A-05022
125 2 7 22.23 5/8'' Blue  AA AA A A   5005BA, 125mm Grinder A-07331
105 2 10 20 16 Gold AA AA A A A   100mm Grinder, 110mm Cutter B-39198
180 2 6.5 25.4 22 Gold  AA AA A    180mm Grinder,180mm Cutter A-87155
230 2.2 7.5 22.23 - Blue  AA AA A A   230mm Grinder A-02820
230 2.2 7.5 22.23 - Gold  AA AA A    230mm Grinder A-86826
Three-star range

<Ideal for Concrete / Dry>

Laser welded / EN standard conformity
105 2 7 20 16 Gold AA AA A A A   100mm Grinder, 110mm Cutter D-44373(EN)
115 2.2 7 22.23 - Gold AA AA A A A   115mm Grinder D-44389(EN)
125 2.2 7 22.23 - Gold AA AA A A A   125mm Grinder D-44395(EN)
180 2.2 7 22.23 - Gold AA AA A A A   180mm Grinder D-44404(EN)
230 2.4 7 22.23 - Gold AA AA A A A   230mm Grinder D-44410(EN)
Two-star range

<Ideal for Concrete / Dry>

EN standard conformity
105 1.8 7 20 16 Gold AA AA A A 100mm Grinder, 110mm Cutter A-84187(EN)
115 1.9 7 22.23 - Gold  AA AA A A   115mm Grinder A-84109(EN)
125 1.9 7 22.23 20 Gold  AA AA A A   125mm Grinder, 125mm Cutter A-84115(EN)
150 2.1 7 22.23 - Gold  AA AA A A   150mm Grinder B-06432(EN)
180 2.3 7 25.4 22.23 Gold  AA AA A A   180mm Grinder, 180mm Cutter A-84121(EN)
230 2.5 7 22.23 - Gold  AA AA A A   230mm Grinder A-84137(EN)
Two-star range

<Ideal for Concrete / Dry >

Long life
105 2 7 20 16 Gold  AA AA A A 100mm Grinder, 110mm Cutter D-05197
D-37552
115 2 7 22.23 - Gold  AA AA A    115mm Grinder
D-37552-10
125 2.2 7 20 - Gold  AA AA A    125mm Cutter D-38261
125 2.2 7 22.23 - Gold  AA AA A    125mm Grinder D-37568
D-37574
180 2.4 7 22.23 - Gold  AA AA A    180mm Grinder
D-37574-10
D-37580
230 2.6 7 22.23 - Gold  AA AA A    230mm Grinder
D-37580-10
 For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
One-star range

<Ideal for Concrete / Dry >

105 2 7 20 16 Gold A AA A A    100mm Grinder, 110mm Cutter D-42531
105 2 10 20 16 Gold A AA A A   100mm Grinder, 110mm Cutter D-42634
105 2 10 20 16 Blue A AA A A    100mm Grinder, 110mm Cutter D-42612
115 1.8 7 22.23 - Gold A AA A A    115mm Grinder D-44270
180 2.2 7 22.23 - Gold A AA A A    180mm Grinder D-44286
230 2.4 7 22.23 - Gold A AA A A    230mm Grinder D-44292

Corrugated
Three-star range

<Ideal for Concrete / Dry >

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
105 2 10 20 16 Gold AA AA A A A   100mm Grinder, 110mm Cutter B-39207
115 2 7 22.23 - Silver  AA AA AA A   115mmGrinder B-02967
125 2 7 22.23 20 Silver  AA AA AA A   125mm Grinder, 125mm Cutter B-02973
180 2 7 22.23 - Silver  AA AA AA A   180mm Grinder B-02989
230 2.3 7 22.23 - Silver  AA AA AA A   230mm Grinder B-01806
Two-star range

<Ideal for Concrete / Dry>

EN standard conformity
105 2 7 20 16 Gold  AA AA A A   100mm Grinder, 110mm Cutter A-84193(EN)
115 2 7 22.23 - Gold  AA AA A A   115mm Grinder A-84143(EN)
125 2.1 7 22.23 20 Gold  AA AA A A   125mm Grinder, 125mm Cutter A-84159(EN)
180 2.3 7 25.4 22.23 Gold  AA AA A A   180mm Grinder, 180mm Cutter A-84165(EN)
230 2.6 7 22.23 - Gold  AA AA A A   230mm Grinder A-84171(EN)
Two-star range

<Ideal for Concrete / Dry >

Long life
105 2 7 20 16 Gold  AA AA A    100mm Grinder, 110mm Cutter D-05206
115 2.3 7 22.23 - Gold  AA AA A    115mm Grinder D-37596
125 2.5 7 22.23 - Gold AA AA A 125mm Grinder D-37605
180 2.9 7 22.23 - Gold  AA AA A    180mm Grinder D-37611
230 3.1 7 22.23 - Gold  AA AA A    230mm Grinder D-37627
One-star range

<Ideal for Concrete / Dry>

110 2.2 7 20 16 Gold  AA AA A    100mm Grinder, 110mm Cutter D-42606

110 2.2 10 20 16 Gold  AA AA A    100mm Grinder, 110mm Cutter D-42640

110 2 10 20 16 Blue A AA A A    100mm Grinder, 110mm Cutter D-42628

Segmented wave
Three-star range

<Ideal for Concrete / Dry>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
105 1.8 7.5 20 16 Gold  AA AA A A   100mm Grinder, 110mm Cutter B-03028
115 2 7.5 22.23 - Blue  AA AA A A   115mm Grinder A-80422
125 2 7.5 22.23 - Blue  AA AA A A   125mm Grinder A-80438(EN)
180 2.2 7 22.23 - Blue  AA AA A A   180mm Grinder A-83842
230 2.5 7.5 22.23 - Blue  AA AA A    230mm Grinder A-80173(EN)
Continuous rim
Three-star range

<Ideal for Concrete & Brick / Dry >

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

80 1.6 3.5 20 - Gold AA AA AA AA  AA  4103KB 792192-6

80 1.6 3.5 20 - Gold AA AA AA AA  AA  4103KB B-22012(EN)

Three-star range

<Ideal for Concrete & Brick / Wet>

110 1.6 5 20 - Gold  AA AA A  A  110mm Cutter D-05212
110 1.5 4 20 - Gold A AA AA A A AA  110mm Cutter A-07185
125 1.5 4 20 - Silver A AA A AA  A  125mm Cutter A-87292
125 1.9 5.5 20 - Silver A AA A AA  A  125mm Cutter B-21951(EN)
180 1.85 4 25 - Gold A AA AA A A AA  180mm Cutter A-80117

Diamond Wheel for Stone

Segmented
Three-star range

<Ideal for Granite / Dry>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

125 2 7.5 20 - Gold AA AA AA AA A   4105KB 792282-5

125 1.9 7 22.23 20 Blue AA AA AA AA    125mm Grinder, 125mm Cutter A-01236

255 2.5 7 25.4 - Blue AA AA AA AA A   255mm Cutter A-02406

Two-star range

<Ideal for Granite / Dry>

105 1.8 7 20 16 Silver AA AA A A    100mm Grinder, 110mm Cutter D-42656
105 1.7 7 20 16 Silver AA AA AA A A   100mm Grinder, 110mm Cutter A-84090
115 1.8 7 22.23 - Silver AA AA AA A A   115mm Grinder A-84006
125 2 7 22.23 20 Silver AA AA AA A A   125mm Grinder, 125mm Cutter A-84012
180 2 6 25.4 22.23 Silver AA AA AA A A   180mm Grinder, 180mm Cutter A-84028
230 2.2 6.5 22.23 - Silver AA AA AA A A   230mm Grinder A-84408
One-star range

<Wet>
*D-63688㸺Dry/Wet>

105 1.8 10 20 16 Silver AA A A A    110mm Cutter D-44351

105 1.8 10 20 16 Green A A AA A    110mm Cutter D-44367

105 2 8 20 16 Silver AA A AA A    100mm Grinder, 110mm Cutter D-63688

Corrugated
Three-star range

<Ideal for Granite / Dry>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

125 2 7 22.23 20 Blue AA AA AA A A 125mm Grinder, 125mm Cutter A-02761

Three-star range

<Ideal for Granite / Dry>

EN standard conformity
115 2 7 22.23 - Blue AA AA AA A A   115mm Grinder A-80684(EN)
125 2 7 22.23 - Blue AA AA AA A A   125mm Grinder A-80690(EN)
180 2 7 22.23 A Blue AA AA AA A A   180mm Grinder A-80709
230 2.3 7 22.23 - Blue AA AA AA A A   230mm Grinder A-80715(EN)
Three-star range

<Wet>
EN standard conformity
110 1.6 5 20 - Gold AA AA AA A A AA  110mm Cutter B-02836
110 2 5 20 - Gold AA AA AA A A AA  110mm Cutter B-22034(EN)

125 2.6 7 20 - White AA AA A A A A  125mm Cutter B-16748(EN)

Two-star range

<Curved Corrugated / Dry>

110 2.5 7 20 - Gold  A AA A    110mm Cutter D-36968

Two-star range

<Ideal for Granite / Dry>

EN standard conformity
105 2 7 20 16 Silver AA AA AA A A   100mm Grinder, 110mm Cutter A-84040(EN)
110 2 7 20 16 Silver AA AA AA A A   100mm Grinder, 110mm Cutter D-42662
115 2 7 22.23 - Silver AA AA AA A A   115mm Grinder A-84056(EN)
125 2.1 7 22.23 20 Silver AA AA AA A A   125mm Grinder, 125mm Cutter A-84062(EN)
180 2.3 7 25.4 22.23 Silver AA AA AA A A   180mm Grinder, 180mm Cutter A-84078(EN)
230 2.6 7 22.23 - Silver AA AA AA A A   230mm Grinder A-84084(EN)
One-star range

<Ideal for Granite,Marble / Dry>

105 2.2 7 20 16 Silver AA A AA A    100mm Grinder, 110mm Cutter D-42553
115 2 7 22.23 - Silver AA A AA A    115mm Grinder D-44301
180 2.6 7 22.23 - Silver AA A AA A    180mm Grinder D-44317
230 3 7 22.23 - Silver AA A AA A    230mm Grinder D-44323

Segmented wave
Three-star range

<Concrete & Granite / Dry>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
115 2 7.5 22.23 - Gold AA AA AA A A   115mm Grinder B-02048
125 2 7.5 22.23 - Gold AA AA AA A A   125mm Grinder B-02054
180 2.2 8 22.23 - Gold AA AA AA A A   180mm Grinder B-02060
230 2.5 7.5 22.23 - Gold AA AA AA A A   230mm Grinder B-02004
 For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
One-star range

<Ideal for Concrete,Granite/ Dry>

105 2.2 7 20 16 Blue AA AA A A    100mm Grinder, 110mm Cutter D-42581
115 2 7 22.23 - Blue AA AA A A    115mm Grinder D-41420
180 2.6 7 22.23 - Blue AA AA A A    180mm Grinder D-44339
230 2.8 7 22.23 - Blue AA AA A A    230mm Grinder D-44345

Continuous rim
Three-star range

<Ideal for Hard material / Dry >

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

80 1.4 5 20 - Blue AA AA AA AA  AA  4103KB A-01264

Diamond Wheel for Tile

Corrugated
Four-star range

<Ideal for Porcelain Tile / Dry>

Thin type
For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

105 1.4 10 22.23 16 Blue  A A AA  AA  100mm Grinder B-49030(EN)

115 1.4 10 22.23 - Blue  A A AA  AA  115mm Grinder B-46327(EN)

125 1.4 10 22.23 - Blue  A A AA  AA  125mm Grinder B-46333(EN)

Three-star range

<Ideal for Porcelain Tile / Dry>

Thin type

110 1.3 8 20 16 Violet  A A A  AA  110mm Cutter D-51057

115 1.3 8 22.23 - Violet  A A A  AA  115mm Grinder D-50893

180 1.6 8 22.23 - Violet  A A A  AA  180mm Grinder D-50902

Continuous rim
Three-star range

<Wet>
For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

110 1.5 4 20 - Blue AA AA AA AA  AA  110mm Cutter A-01292

180 1.85 4 25 - Gold AA AA AA AA A AA  180mm Cutter 792191-8

 For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
Three-star range

<Wet>

110 1.5 4 20 - Silver AA AA AA AA 110mm Cutter A-85210

110 1.5 4 20 - Gold A AA AA A A AA 110mm Cutter A-81131

Three-star range

<Ideal for Marmoglass / Wet>

110 1.7 8 20 - Violet AA 110mm Cutter, 4100NH2 D-37770

Two-star range

<Dry>

115 1.4 10 22.23 - Violet AA 115mm Grinder D-65109

One-star range

<Ideal for celamic tile / Wet>

110 1.8 5 20 16 Violet AA A A AA 110mm Cutter D-44258

180 2.2 5 25.4 - Violet AA A A AA 180mm Cutter D-44264

Diamond Wheel for Glass

Corrugated
Three-star range

<Ideal for Bulletproof Glass / Wet>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

110 1.2 6 20 - Blue AA A A AA AA 110mm Cutter B-00795

110 1.9 6 20 - Blue AA A A AA AA 110mm Cutter B-22028(EN)

Continuous rim
Three-star range

<Ideal for Bulletproof Glass / Wet>

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

110 1.2 5 20 - Violet AA 110mm Cutter, 4100NH2 D-40705

Specialized / Electroplated Diamond Wheel
for Marble

*D-45004 : Wet
For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

110 2 4.5 20 - Green   AA     110mm Cutter D-45004(EN)

115 2 5 22.23 - Green   AA     115mm Grinder D-51085(EN)

180 2.2 5 22.23 - Green   AA     180mm Grinder D-51091(EN)

230 2.4 5 22.23 - Green AA   230mm Grinder D-51100(EN)

Specialized / Vacuum brazed Diamond Wheel

for Metal

For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
100 1.3 1.5 16 - Violet - - - - - - - 100mm Grinder B-53671(EN)
115 1.3 1.5 22.23 - Violet - - - - - - - 115mm Grinder B-53687(EN)
125 1.3 1.5 22.23 - Violet - - - - - - - 125mm Grinder B-53693(EN)
180 1.3 1.5 22.23 - Violet - - - - - - - 180mm Grinder B-53702(EN)
230 1.3 1.5 22.23 - Violet - - - - - - - 230mm Grinder B-53718(EN)

Specialized / Vacuum brazed Rescue Diamond Wheel

Multi cut
For Material
Shape D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

110 2 5.0 20 16 Violet A A A A    100mm Grinder, 110mm Cutter D-44426

230 3.2 5.0 22,23 - Gold A A A A A A A 230mm Grinder A-89894

305 3.3 8.0 20 - Gold A A A A A A A 305mm Power Cutter A-88808

100 2.8 4.0 16 - Red A A A A A A A 100mm Grinder B-66933(EN)

115 2.8 4.0 22.23 - Red A A A A A A A 115mm Grinder B-55304(EN)
125 2.8 4.0 22.23 - Red A A A A A A A 125mm Grinder B-55310(EN)
180 3.1  22.23  Red A A A A A A A 180mm Grinder B-66949(EN)
230 3.1 4.0 22.23 - Red A A A A A A A 230mm Grinder B-55326(EN)
300 3.4 4.0 25.4 20 Red A A A A A A A 305mm Power Cutter B-55332(EN)
350 3.4 4.0 25.4 20 Red A A A A A A A 355mm Power Cutter B-55348(EN)
405 3.6  25.4  Red A A A A A A A 405mm Power Cutter B-66955(EN)

Specialized / Tungsten Carbide Grit Blade

For Material
Application 
D T X
 
H d Color Model No. Part No.
1 2 3 4 5 6 7
PVC, Plaster board, Sanding board, Fiber material 115 2 - 22.23 - Black - - - - - - - 115mm Grinder B-57716
PVC, Plaster board, Sanding board, Fiber material 125 2 - 22.23 - Black - - - - - - - 125mm Grinder B-57722
Specialized / for Mortar raking
For Joints

For Material
D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

125 4.5 8 22.23 - Silver        125mm Grinder A-02705(EN)

Specialized / Crack Chaser

Crack Chaser

For Material
D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

4-1/8'' 0.37'' 0.49'' 7/8'' 5/8'' Blue  AA AA A A   100mmGrinder D-09606

105 9.5 12.5 22.23 16 Gold  AA AA A A   100mmGrinder D-16427

125 9.5 12.5 22.23 - Gold  AA AA A A   125mmGrinder D-16477

Specialized / Cordless Tools

For Material
Application D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

High Grade / Continuous rim / Wet 80 0.8 4 15 - Silver      AA AA 4190DW, 4191DW 792296-4

85 0.9 4 15 - Silver      AA AA CC300D B-21082

Standard / Continuous rim / Glass / Wet 85 1.8 5 15 - Silver      AA AA CC300D B-21098(EN)

CC300D, 4190DW,
85 0.9 4 15 - Silver   A A  A A A-01323
4191DW
CC300D, 4190DW,
Standard / Corrugated / Glass / Dry 85 0.9 5 15 - Gold   AA A A AA AA B-02995
4191DW
Standard / Corrugated / CC300D, 4190DW,
85 1.1 5 15 - Blue  AA AA A A AA AA A-07353
Universal / Dry & Wet 4191DW
CC300D, 4190DW,
85 0.8 2.2 15 - Silver   AA   AA AA A-07179
Standard / Electrodeposited / 4191DW
Glass & Porcelain / Wet CC300D, 4190DW,
85 0.8 2.2 15 - Silver   AA   AA AA A-07163
4191DW

Specialized / Engine Power Cutter Tools

Laser Welded

For Material
Application D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

High Grade / Segmented / Hard Concrete 300 2.8 7 25.4 20 Gold AA AA AA AA A  305mm Power Cutter A-87018

Standard / Segmented / General 300 2.8 5 25.4 20 Silver A AA AA AA    305mm Power Cutter A-86773

Standard / Segmented / Concrete, Brick 304 2.8 6.5 25.4 20 Silver A AA AA AA    305mm Power Cutter A-89349

Standard / Segmented / General 350 3.2 5 25.4 20 Silver A AA AA AA    355mm Power Cutter A-87317
Specialized / 305mm Cutter, Engine Power Cutter Tools

For Material
Application D T X H d Color Model No. Part No.
1 2 3 4 5 6 7
305mm Cutter, Power
Standard / Segemented / Concrete / Dry 305 3 7.5 30 Gold  AA AA A A   A-02478
Cutter
20,
305mm Cutter, Power
Standard / Segmented / Asphalt / Dry 305 3 7.5 30 22.23, Silver     A   A-02484
Cutter
25.4
Standard / Segmented / Concrete & Asphalt / 305mm Cutter, Power
305 3 7.5 30 Blue  AA AA AA A   A-02490
Dry Cutter

Specialized / 355mm Portable Cut-off Tools

For Material
Application D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

Vacuum brazed / Metal 355 3.3 4 25.4 - Violet        355mm Portable Cut-off D-41414

Vacuum brazed / Metal / Speed type 355 3.3 4 25.4 - Violet        355mm Portable Cut-off B-29511

Specialized / Wall Chaser Tools

For Material
Application D T X H d Color Model No. Part No.
1 2 3 4 5 6 7

Segmented / Dry 125 2 7.5 22.23 - Blue  AA AA A A   SG1251 A-80438(EN)

Segmented / Dry 155 2 7 22.23 - Blue  AA AA A A   SG150 A-83836

Accessories 169

Offset Diamond Wheels

Single Rough work
This wheel grind more efficiency.
Faster than the wheel for standard work.

Double Segmented Fan Standard work

This wheel has a characteristic between Rough work
offset diamond wheels and Fine work offset diamond
wheels.

Turbo Rim Fine work

This wheel is suitable for cleanup and finish work
and chamfering works.

SPECIALIZED
PCD Removal of paint
This wheel is suitable for removal of
polyurethane, adhesive, paint, epoxy and
acrylic coating.
PCD is an abbreviations of "Polycrystalline
Diamond". It is a kind of an artificial diamond
and superior in hardness and durability.

Vacuum brazed For hard materials

This wheel is suitable for hard materials.
Diamonds are held tightly.

Diamond

Low Vibration
on Offset Diamond Wheel
Low Vibration
The vibration is not conducted to the worker's hand and able to ease the load a lot!!

Less Tapping
Clinging to the material and able to cut smoothly, faster and more efficient.

Low Vibration Type

Normal Low
Vibration
Type
Low Vibration Offset Diamond Wheel

Four-star range

AA: Specially suitable, A: Suitable

(EN) : EN13236
For Material
Shape Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7
Rough work
Single type

For coarse grinding 125mm

125 8 5.5 M14 - Gold AA AA AA A A   B-48533(EN)
work Grinder

For coarse grinding 180mm

180 8 5 M14 - Gold AA AA AA A A   B-48599(EN)
work Grinder

Standard work
Double type

For coarse grinding

125mm
work, 125 8 5.5 M14 - Gold AA AA AA A A   B-48549(EN)
Grinder
For removing point

For coarse grinding

180mm
work, 180 8 5 M14 - Gold AA AA AA A A   B-48608(EN)
Grinder
For removing point

Segmeted type

For coarse grinding

125mm
work, 125 8 5.5 M14 - Gold AA AA AA A A   B-38560(EN)
Grinder
For removing point

Fan type

For coarse grinding

125mm
work, 125 7 5.5 M14 - Gold AA AA AA A A   B-48555(EN)
Grinder
For removing point

For coarse grinding

180mm
work, 180 7 5 M14 - Gold AA AA AA A A   B-48614(EN)
Grinder
For removing point

Fine work
Turbo type

125mm
For fine finishing 125 15 4.5 M14 - Gold AA AA AA A A   B-49993(EN)
Grinder

180mm
For fine finishing 180 20 5 M14 - Gold AA AA AA A A B-48620(EN)
Grinder
Offset Diamond Wheel
One-star to Three-star range
-
AA: Specially suitable, A: Suitable
(EN) : EN13236
For Material
Shape Range Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7
Rough work
Single type

for Concrete 100 8 5 22.23 16 Silver A AA A A A 100mm Grinder D-62284

For coarse
105 8 4 22.23 - Silver A AA A A A   115mm Grinder B-14629
grinding work

for Concrete 115 8 5 22.23 - Silver A AA A A A   115mm Grinder D-60676

PC5000, 5001C
for Concrete 125 8 5 22.23 - Silver A AA A A A D-60682
125mm Grinder

For coarse PC5000, 5001C

125 8 5.5 22.23 - Silver AA AA AA A A   B-48561(EN)
grinding work 125mm Grinder

for Concrete 180 8 5 22.23 - Silver A AA A A A   180mm Grinder D-62290

For coarse
180 8 5 22.23 - Silver AA AA AA A A   180mm Grinder B-48636(EN)
grinding work

Standard work
Double type

for Concrete 100 8 5 22.23 16 Silver AA AA AA A A   100mm Grinder D-62309

for Concrete 115 8 5 22.23 - Silver AA AA AA A A   115mm Grinder D-62315

for Concrete 125 8 5 22.23 - Silver AA AA AA A A   125mm Grinder D-66715

For coarse
grinding work,
125 7 5 22.23 - Silver AA AA AA A A   PC5000, 5001C D-41458(EN)
For removing
point

For coarse
grinding work, PC5000, 5001C
125 8 5 22.23 - Gold AA AA AA A A   B-12295(EN)
For removing 125mm Grinder
point
 For Material
Shape Range Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7

For coarse
grinding work, PC5000, 5001C
125 8 5.5 22.23 - Silver AA AA AA A A   B-48577(EN)
For removing 125mm Grinder
point

for Concrete 180 8 5 22.23 - Silver AA AA AA A A   180mm Grinder D-62321

For coarse
grinding work,
180 8 5 22.23 - Silver AA AA AA A A   180mm Grinder B-48642(EN)
For removing
point

Segmeted type

For coarse
grinding work,
100 8 5 22.23 16 Gold AA AA AA A A   100mm Grinder A-87105
For removing
point

Fan type

For coarse
grinding work, PC5000, 5001C
125 7 5.5 22.23 - Silver AA AA AA A A   B-48583(EN)
For removing 125mm Grinder
point

For coarse
grinding work,
180 7 5 22.23 - Silver AA AA AA A A   180mm Grinder B-48658(EN)
For removing
point

Fine work
Turbo type                

for Concrete 100 8 5 22.23 16 Silver AA AA AA A A   100mm Grinder D-62337

For general use 105 10 5 22.23 - Gold A AA A A A   115mm Grinder B-44993

for Concrete 115 8 5 22.23 - Silver AA AA AA A A   115mm Grinder D-62343

for Concrete 125 20 5 22.23 - Silver AA AA AA A A   125mm Grinder D-66721

PC5000, 5001C
For fine finishing 125 15 4.5 22.23 - Silver AA AA AA A A   B-50005(EN)
125mm Grinder

for Concrete 180 8 5 22.23 - Silver AA AA AA A A   180mm Grinder D-62359

For fine finishing 180 20 5 22.23 - Silver AA AA AA A A   180mm Grinder B-48664(EN)

 For Material
Shape Range Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7
Rim type

For fine finishing 125 13 5 22.23 - Silver AA AA AA A A   PC5000, 5001C D-41464(EN)

PC5000, 5001C
For fine finishing 125 13.5 4 22.23 - Gold AA AA AA A A   B-12289(EN)
125mm Grinder

Specialized/PCD Offset Diamond Wheel

For Material
Shape Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7
For removal of
polyurethane,
PC5000, 5001C
adhesive, paint, 125 - - 22.23 - Black - - - - - - - B-53160
125mm Grinder
epoxy and acrylic
coatings
For removal of
polyurethane,
PC5000, 5001C
adhesive, paint, 180 - - 22.23 - Black - - - - - - - B-53176
180mm Grinder
epoxy and acrylic
coatings

Vacuum brazed Offset Diamond Wheel

Three-star range

Standard work
Vacuum brazed type
For Material
Shape Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7

Angle type 115 27.5 - 22.23 - Gold AA A A     115mm Grinder A-87834(EN)

Flat type 115 27.5 - 22.23 - Gold AA A A     115mm Grinder A-87884(EN)

Offset Diamond Wheel for PC1100

Three-star range

For Material
Shape Application D T X H d Color For Model Part No.
1 2 3 4 5 6 7
Standard work
Segmeted type

For coarse
grinding work,
110 8 5 15 - Silver AA AA AA A A  PC1100 A-86321(EN)
For removing
point

Fine work
Turbo type

For general use 110 13.5 4 15 - Blue AA AA AA A A  PC1100 A-07369(EN)

Rim type

For fine finishing 110 13.5 4 15 - Silver AA AA AA A A  PC1100 792289-1(EN)

SDS-Plus Diamond core bit (Dry type) Vacuum Brazed diamond core bit
When drilling with diamond core bit, always use ''rotation only''.
SDS-Plus adapter (wtih center bit) A-87563

For Model:
SDS-PLUS hammers For: 115mm, 125mm, 150mm,180mm, 230mm Angle Grinder
Material : Granite/Marble/Porcelain Tile
Size Spindle thread Part No.
Spindle threde M18 5 mm M14 x 2 D-61064
Capacity (Diameter x Depth) Part No. 6mm M14 x 2 D-61070

38 x 175mm A-87535 8mm M14 x 2 D-61086

10mm M14 x 2 D-61092
54 x 175mm A-87541
12mm M14 x 2 D-61101
65 x 175mm A-87557
14mm M14 x 2 D-44432
16mm M14 x 2 D-44448
Diamond core bit (Dry Type) 20mm M14 x 2 D-44454
When drilling with diamond core bit, always use ''rotation only''. 22mm M14 x 2 D-44460
Center bit (A-80503), Center bit shank (A-80519)
For Model: 25mm M14 x 2 D-44476
8406, 8406C 27mm M14 x 2 D-44482
30mm M14 x 2 D-44498
Spindle thread M18 32mm M14 x 2 D-44507
35mm M14 x 2 D-44513
13mm straight shank (three flat) 38mm M14 x 2 D-44529
Capacity (Diameter x Capacity (Diameter x
Part No. Part No. 40mm M14 x 2 D-44535
Depth) Depth)
45mm M14 x 2 D-44541
32 x 165mm A-85036 90 x 165mm A-85086
51mm M14 x 2 D-44557
38 x 165mm A-85042 105 x 165mm A-80488
55mm M14 x 2 D-44563
54 x 165mm A-85058 120 x 165mm A-80494
57mm M14 x 2 D-44579
65 x 165mm A-85064 127 x 165mm A-85606
60mm M14 x 2 D-44585
70 x 165mm A-85070 152 x 165mm A-85597
65mm M14 x 2 D-44591
80 x 165mm A-80472 162 x 165mm A-85612
67mm M14 x 2 D-44600
68mm M14 x 2 D-44616
Electroplated diamond core bit 70mm M14 x 2 D-44622
75mm M14 x 2 D-44638
80mm M14 x 2 D-44644
83mm M14 x 2 D-44650
Spindle thread M10

For: 100mm Angle Grinder

5mm M10 x 1.5 D-63264
For: 115mm, 125mm, 150mm,180mm, 230mm Angle Grinder 6mm M10 x 1.5 D-63270
Material : Marble 8mm M10 x 1.5 D-63286
Size Spindle thread Part No. 10mm M10 x 1.5 D-63292
25mm M14 x 2 D-35025 12mm M10 x 1.5 D-63301
30mm M14 x 2 D-35019 14mm M10 x 1.5 D-63317
35mm M14 x 2 D-35003 16mm M10 x 1.5 D-63323
40mm M14 x 2 D-37007 20mm M10 x 1.5 D-63339
45mm M14 x 2 D-37013 25mm M10 x 1.5 D-63345
Inch Size (North American Package) 32mm M10 x 1.5 D-63351
1/2'' 5/8''-11 D-37758 37mm M10 x 1.5 D-63367
1-1/4'' 5/8''-11 D-36332 40mm M10 x 1.5 D-63373
1-3/8'' 5/8''-11 D-36348 50mm M10 x 1.5 D-63389
2'' 5/8''-11 D-37764

Vacuum Brazed diamond pin drill

For: 13mm Driver Drill

Material : Granite/Marble/Porcelain Tile
Size Spindle thread Part No.
6mm 6mm x 12.5mm B-51823
8mm 8mm x 12.5mm B-51839
10mm 10mm x 12.5mm B-51845
ACCESSORIES
Planing / Routering
Planer blade (2 per pkg.) Drywall guide bit
HSS(High Speed Steel): Fine cutting surface. A: Diamond bit
TC(Tungsten Carbide): Higher durability. Suitable for hard wood.

*5 Sets
For Model: Size (mm) Material Part No. For Model: Size Type Part No.

80 HSS A-07397 3.18mm(1/8'') - 733229-0

1600
80 HSS D-65501 3706 6.35mm(1/4'') - 733232-1

82 HSS A-07406 6.35mm(1/4'') A A-87915

1100/N,
N1900B, 1902, 82 HSS D-16346
N1923B/H,
KP0810/C, 82 HSS D-67228 Cutter blade
KP0800, Dia. 120mm
DKP180, 82 HSS *D-67234 For Model:
DKP181 3501N
82 TC D-07967

1002BA, 110 HSS A-07412

1911B 110 TC D-08822 Region A Part
Width (mm) Width (mm) Part No.
No.
1804N 136 HSS A-07428
2.4 793021-6 12 793031-3
155 TC 793015-1
1805N 3 793022-4 13.5 793032-1
155 HSS D-70910
3.9 793024-0 15 793039-7
2031, 2034 155 HSS D-63915
4.5 793025-8 16.5 793040-2
1806B 170 HSS D-63666
5.5 793026-6 18 793041-0
2012NB 306 HSS 199911-5
6 793027-4 21 793042-8
2030 306 HSS 199910-7
7.5 793028-2 30 793043-6
2040 400 HSS 793019-3
9 793029-0 33 793044-4

10.5 793030-5 36 793045-2

Mini planer blade
(2 blades per pkg.)
The blade has edges on both sides for long life. Cutter chain
HSS(High Speed Steel): Fine cutting surface.
TC(Tungsten Carbide): Higher durability. A:Use with the sprocket (part No. 221502-5) & chain bar (Part No. 122235-4)
For Model:
7104L

For Model: Size (mm) Material Type Part No.

82 TC - A-82921 Size(mm) Type Part No.

1100/N,
N1900B, 82 TC - D-07945 15 - A-16564
1902,
82 TC w/ Set plate D-07951 16.5 - A-16570
N1923B/H,
KP0810/C, 82 TC 5 Sets D-35302 18 - A-16586
KP0800,
DKP180, 82 TC  D-70823 21 - A-16592
DKP181
82 TC 5 Sets D-70839 24 - A-16601

2012NB 306 HSS - 793346-8 30 A A-16617

KP312/S 312 HSS - B-02870

Cutter blade
Carbide-tipped plate joiner blade

For Model:
3901,PJ7000, DPJ180, DPJ140
*North American Package
Blade dia. (mm) Hole dia. (mm) Tip thickness (mm) Region A

100 22 4 B-20644
Router bit set
(12 pc/ set)

(mm)
Size #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 Part No.

8mm D:12.7 D:28.6 D:12.7 D:25.0 D:22.2 D:22.0 D:12.7 D:32.0 A-88054
D:16.0 D:6.0 D:12.7 D:12.0
R:6.35 R:9.5 B:9.1 R:4.0 R:6.3 R:6.3 B:12.7 B:12.2
6mm B:20.0 B:20.0 B:13.0 B:20.0 A-87921
B:8.8 B:17.0 A:90° B:16.0 B:13.5 B:12.7 A:14° A:45°
L:28.0 L:25.0 L:29.0 L:28.0
1/4'' L:29.0 L:25.5 L:29.0 L:26.5 L:25.0 L:26.5 L:29.0 L:30.0 A-91051

(mm)
Size #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 Part No.
D:12.7 D:12.7 D:12.7 D:25.4 D:31.8 D:31.8 D:31.5 D:28.6
D:6 D:12 D:16 D:12.7
8mm B:13 B:12.7 R:6.35 R:6.35 R:9.5 R:9.5 B:13.5 R:4 D-53556
B:16 B:19 B:19 B:13
A:14° A:90° B:10 B:13.5 B:16.7 B:14 A:45° B:13
D:1/2'' D:1/2'' D:1/2'' D:1'' D:1-1/4'' D:1-1/4'' D:1-1/4'' D:1-1/8''
D:1/4'' D:1/2'' D:5/8'' D:1/2''
1/4'' B:1/2'' B:1/2'' R:1/4'' R:1/4'' R:3/8'' R:3/8'' B:17/32 R:5/32'' D-53584
B:5/8'' B:3/4'' B:3/4'' B:1/2''
A:14° A:90° B:3/8'' B:17/32'' B:21/32'' B:17/32'' A:45° B:1/2''

(mm)
Size #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 Part No.
D:6.35 D:12.7 D:19 D:25.4 D:28.5 D:25.4 D:25.3
D:6 D:6 D:12 D:14 D:12.7
6mm R:3.2 B:12.7 R:3.2 R:6.35 R:7.9 B:11 R:3.2 D-57065
B:19 B:16 B:32 B:19 B:13
B:12.7 A:90° B:9.5 B:13.5 B:14.5 A:45° B:9.5

(4 pc/ set)
(mm)

Size #1 #2 #3 #4 Part No.

D:19 D:25.4 D:31.8 D:38.1
8mm R:3.2 R:6.35 R:9.5 R:12.7 D-53534
B:9.5 B:13.5 B:16.7 B:19
D:3/4'' D:1'' D:1-1/4'' D:1-1/2''
1/4'' R:1/8'' R:1/4'' R:3/8'' R:1/2'' D-53562
B:3/8'' B:17/32'' B:21/32'' B:3/4''

(mm)

Size #1 #2 #3 #4 #5 #6 Part No.

D:12.7 D:31.8 D:28.6
D:6 D:10 D:12
8mm R:6.35 R:9.5 R:4 D-53540
B:16 B:19 B:19
B:10 B:16.7 B:13
D:1/2'' D:1-1/4'' D:1-1/8''
D:1/4'' D:3/8'' D:1/2''
1/4'' R:1/4'' R:3/8'' R:5/32'' D-53578
B:5/8'' B:3/4'' B:3/4''
B:3/8'' B:21/32'' B:1/2''
Straight bit Drill point double flush trimming bit
Three-star range

(mm)
(mm)
D A1 L1 L2 Part No.
D A1 L1 L2 L3 L4 Part No.
6 20 50 15 D-09313
6 6 70 40 12 14 D-09341
6 6 50 18 D-09167
6 8 50 18 D-09260
8 8 60 25 D-62094 Board-jointing bit
12 10 60 25 D-10182
12 12 60 30 D-07892
(inch)
1/4'' 20 50 15 D-15431
1/4'' 6 50 18 D-09173
1/4'' 8 50 18 D-15388 (mm)
1/2'' 10 60 25 D-15512 D A1 A2 L1 L2 L3 Part No.
1/2'' 12 60 30 D-07901 12 38 27 61 4 20 D-12027

'U'' Grooving bit Corner rounding bit

(mm) (mm)
D A1 L1 L2 R1 Part No. D A1 A2 L1 L2 L3 R1 Part No.
6 6 50 18 3 D-09329 6 25 9 48 13 5 8 D-09363
6 20 8 45 10 4 4 D-09357

'V'' Grooving bit

B:Angle
Chamfering bit
B:Angle

(inch)
D A1 L1 L2 B Part No. (mm)
1/4'' 20 50 15 90 D-15453 D A1 L1 L2 L3 B Part No.
6 23 46 11 6 30 D-09379

Drill point flush trimming bit 6 20 50 13 5 45 D-09385

6 20 49 14 2 60 D-09391

Cove beading bit

(mm)
D A1 L1 L2 L3 Part No. (mm)
6 6 60 18 28 D-09335 D A1 L1 L2 R1 Part No.
8 8 60 20 35 D-10578 6 20 43 8 4 D-09400
12 12 60 20 35 D-10584 6 25 48 13 8 D-09416
Ball bearing flush trimming bit Ball bearing cove beading bit

(mm) (mm)
D A1 L1 L2 Part No. D A1 A2 L1 L2 L3 R1 Part No.
6 10 50 20 D-09472 6 20 18 40 10 5.5 3 D-09553
(inch) 6 26 22 42 12 5 5 D-09569
1/4'' 10 50 20 D-04313

Ball bearing Roman Ogee bit

Ball bearing beading bit

(mm)
(mm) D A1 A2 L1 L2 R1 R2 Part No.
D A1 A2 L1 L2 L3 R1 Part No. 6 20 8 40 10 2.5 4.5 D-09575
6 20 12 40 10 5.5 4 D-09525 6 26 8 42 12 3 6 D-09581
6 26 12 42 12 4.5 7 D-09547

Drill point sash router bit

Ball bearing corner rounding bit For Model:
4402

(mm)
D A1 L1 L2 Part No.
6 6 65 18 D-16988
(mm) (inch)
D A1 A2 L1 L2 L3 R1 Part No. 1/4'' 6 65 18 D-16972
6 15 8 37 7 3.5 3 D-09422
6 21 8 40 10 3.5 6 D-09444
(inch)
1/4'' 21 8 40 10 3.5 6 D-15475
Economy type Router bit

Ball bearing chamfering bit

B:Angle

(mm)
D A1 A2 L1 L2 B Part No.
6 26 8 42 12 45 D-09488
6 20 8 41 11 60 D-09494
(inch)
1/4'' 26 8 42 12 45 D-15506
Straight bit 2 Flute D A1 L1 L2 Part No.
D-49127
Two-star range 1/4'' 3/8'' 2'' 3/4''
*D-68993
D-49133
1/4'' 1/2'' 2'' 3/4''
*D-69004
D-49149
1/4'' 9/16'' 2'' 3/4''
*D-69010
D-49155
1/4'' 5/8'' 2'' 3/4''
*D-69026
D-49161
1/4'' 23/32'' 2'' 3/4''
*D-69032
D-49177
(mm) 1/4'' 3/4'' 2'' 3/4''
*D-69048
Plastic hanger display
D-62751
*Plastic+cardboard blister 1/2'' 1/4'' 2-1/2'' 3/4''
*D-69054
D A1 L1 L2 Part No. D-49183
1/2'' 5/16'' 2-3/4'' 1''
D-47422 *D-69060
6 6 48 16
*D-67717 D-49199
1/2'' 3/8'' 2-7/8'' 1''
D-47438 *D-69076
6 6 57 25
*D-67723 D-62767
1/2'' 1/2'' 2-5/8'' 1''
D-47444 *D-69082
6 8 51 19
*D-67739 D-49208
1/2'' 1/2'' 2-7/8'' 1-1/4''
D-47450 *D-69098
6 8 57.4 25.4
*D-67745 D-62773
1/2'' 1/2'' 3'' 1-1/2''
D-47466 *D-69107
6 10 57.4 25.4
*D-67751 D-58512
1/2" 1/2" 4-1/2" 2-1/2"
D-47472 *D-69191
6 12 64 32
*D-67767 D-49214
1/2'' 9/16'' 2-7/8'' 1-1/4''
D-47488 *D-69113
6 14 51 19
*D-67773 D-49220
1/2'' 5/8'' 2-7/8'' 1-1/4''
D-47494 *D-69129
6 20 51 19
*D-67789 D-62789
1/2'' 3/4'' 2-5/8'' 1''
D-47503 *D-69135
8 6 48 16
*D-67795 D-49236
1/2'' 3/4'' 2-7/8'' 1-1/4''
D-47519 *D-69141
8 6 51 19
*D-67804 D-62795
1/2'' 3/4'' 3'' 1-1/2''
D-47525 *D-69157
8 8 51 19
*D-67810 D-62804
1/2'' 7/8'' 2-5/8'' 1''
D-47531 *D-69163
8 10 51 19
*D-67826 D-49242
1/2'' 7/8'' 2-7/8'' 1-1/4''
D-47547 *D-69179
8 12 51 19
*D-67832 D-49258
1/2'' 1'' 2-7/8'' 1-1/4''
D-47553 *D-69185
8 14 51 19
*D-67848
D-47569
8 16 51 19
*D-67854 Straight bit Super
D-47575
8 18 51 19
*D-67860
D-47581
8 20 51 19
*D-67876
D-47597
8 22 57.2 25.4
*D-67882
D-47606
8 24 57 25.4
*D-67898
D-47612
12 8 70 25
*D-67907
D-47628
12 10 70 25.4 (inch)
*D-67913
D-47634 D A1 L1 L2 Part No.
12 12 73 32
*D-67929
D-62810
D-47640 1/2'' 1/2'' 4'' 2''
12 14 73 32 *D-69200
*D-67935
D-47656
12 16 73 32
*D-67941
D-47662
Straight bit Pattern
12 19 73 32
*D-67957
D-47678
12 22 73 32
*D-67963
D-47684
12 25 73 32
*D-67979
(inch)
D-49052
1/4'' 1/4'' 2-1/4'' 1''
*D-68921
D-49068
1/4'' 5/16'' 2-1/4'' 1''
*D-68937
D-49074 (inch)
1/4'' 3/8'' 2-1/4'' 1''
*D-68943 D A1 L1 L2 Part No.
D-49080
1/4'' 1/2'' 2-1/2'' 1-1/4'' D-62826
*D-68959 1/2'' 3/4'' 2-13/16'' 1''
*D-69216
D-49096
1/4'' 1/4'' 1-7/8'' 5/8''
*D-68965
D-49105
1/4'' 1/4'' 2'' 3/4''
*D-68971
D-49111
1/4'' 5/16'' 2'' 3/4''
*D-68987
Straight bit 1 Flute Flush Trim Bit 3 Flute

(mm)
(mm) D A1 L1 L2 Part No.
D A1 L1 L2 Part No. D-47759
8 12.7 68.5 26
D-47416 *D-68046
6 6 50.8 19 D-47765
*D-67701 12 12.7 91.4 38
D-47379 *D-68052
8 3 51 13
*D-67664 (inch)
D-47385
8 4 51 13 D-49292
*D-67670 1/4'' 1/2'' 2-11/16'' 1''
*D-69331
D-47391
8 5 48 13 D-49301
*D-67686 1/2'' 1/2'' 3-19/32'' 1-1/2''
*D-69347
D-47400
8 6 50.8 19
*D-67692
(inch) Panel Pilot Bit
D-49002
1/4'' 1/8'' 2'' 1/2''
*D-68862
D-49018
1/4'' 5/32'' 2'' 1/2''
*D-68878
D-49024
1/4'' 3/16'' 1-7/8'' 1/2''
*D-68884
D-49030
1/4'' 1/4'' 2'' 3/4''
*D-68890 (mm)
D-62739
1/2'' 1/4'' 2-1/2'' 3/4'' D A1 L1 L2 Part No.
*D-68909
D-62745 D-47771
1/2'' 3/8'' 2-1/2'' 1'' 6 6.35 65 19
*D-68915 *D-68068
D-47787
8 6.35 65 19
*D-68074
Flush Trim Bit 2 Flute D-47793
12 9.5 75 26
*D-68080
(inch)
D-49317
1/4'' 1/4'' 2-9/16'' 3/4''
*D-69375
D-49323
1/2'' 3/8'' 3'' 1''
*D-69381
1/2" 1/2" 3-5/8" 1-17/64" D-58566
1/2'' 1/2'' 3-9/16'' 1-1/8'' D-63133
(mm)
D A1 L1 L2 Part No.
Round Nose Bit
D-47690
6 9.5 66.9 26
*D-67985
D-47709
6 12.7 56 13
*D-67991
D-47715
6 12.7 68.5 26
*D-68002
D-47721
8 9.5 67 26 (mm)
*D-68018
D-47737 D A1 L1 L2 R1 Part No.
8 12.7 55.7 13
*D-68024 D-47802
D-47743 6 6.35 44.5 12.7 3.2
8 12.7 68.5 26 *D-68096
*D-68030 D-47818
6 9.5 44.5 12.7 4.8
(inch) *D-68105
D-47824
D-58528 6 12.7 51 19 6.35
1/4" 1/4" 2-1/8" 1/2" *D-68111
*D-69266
D-47830
D-49264 8 6.35 44.5 12.7 3.2
1/4'' 3/8'' 2-5/8'' 1'' *D-68127
*D-69238
D-47846
D-58534 8 9.5 44.5 12.7 4.8
1/4" 3/8" 2-1/8" 1/2" *D-68133
*D-69272
D-47852
D-49270 8 12.7 51 19 6.35
1/4'' 1/2'' 2-3/16'' 1/2'' *D-68149
*D-69244
D-49286 (inch)
1/4'' 1/2'' 2-11/16'' 1''
*D-69250 D-49339
D-58540 1/4'' 1/2'' 2'' 3/4'' 1/4''
1/2" 1/2" 3" 1" *D-69397
*D-69288 D-49345
D-62832 1/4'' 1/4'' 1-3/4'' 1/2'' 1/8''
1/2'' 1/2'' 3-19/32'' 1-1/2'' *D-69406
*D-69294 D-49351
D-62848 1/4'' 3/8'' 1-3/4'' 1/2'' 3/16''
1/2'' 1/2'' 4-1/64'' 2'' *D-69412
*D-69303 D-62876
D-62854 1/2'' 3/8'' 2-1/4'' 1/2'' 3/16''
1/2'' 3/4'' 3'' 1'' *D-69428
*D-69319 D-62882
D-62860 1/2'' 1/2'' 2-3/8'' 3/4'' 1/4''
1/2'' 3/4'' 3-5/16'' 1-1/4'' *D-69434
*D-69325 D-62898
1/2'' 3/4'' 2-5/8'' 1'' 3/8''
*D-69440
V Groove Bit D A1 L1 L2 R1 Part No.
B:Angle (inch)
D-49448
1/4'' 1/4'' 1-1/2'' 1/4'' 1/8''
*D-69543
D-49454
1/4'' 5/16'' 1-37/64'' 5/16'' 5/32''
*D-69559
D-49460
1/4'' 3/8'' 1-5/8'' 3/8'' 3/16''
*D-69565
(mm) D-49476
1/4'' 1/2'' 1-5/8'' 3/8'' 1/4''
*D-69571
D A1 L1 L2 B Part No.
D-49482
D-47868 1/4'' 5/8'' 1-3/4'' 1/2'' 5/16''
6 12.7 44.7 12.7 90dg *D-69587
*D-68155
1/2'' 1/4'' 2'' 1/4'' 1/8'' D-62929
D-47874
6 12.7 48 16 60dg
*D-68161 1/2'' 5/16'' 2'' 5/16'' 5/32'' D-62935
D-47880
6 19 47.6 16 90dg
*D-68177 1/2'' 3/8'' 2'' 3/8'' 3/16'' D-62941
D-47896
8 12.7 44.7 12.7 90dg 1/2'' 1/2'' 2'' 3/8'' 1/4'' D-62957
*D-68183
D-47905 1/2'' 5/8'' 2-1/8'' 1/2'' 5/16'' D-49498
8 15.9 44 12.7 90dg
*D-68199
D-47961 D-49507
8 12.7 48 16 60dg 1/2'' 3/4'' 2'' 1/2'' 3/8''
*D-68258 *D-69593
D-47933 D-49513
8 19 47.6 16 90dg 1/2'' 1'' 2-1/4'' 5/8'' 1/2''
*D-68220 *D-69602
D-47911 1/2'' 1'' 2-9/32'' 11/16'' 1/2'' D-62963
12 12.7 54 12.7 90dg
*D-68208 D-62979
D-47927 1/2'' 1-1/4'' 2-3/8'' 3/4'' 5/8''
12 15.9 50.8 12.7 90dg *D-69618
*D-68214
D-47949 1/2'' 1-1/2'' 2-7/8'' 7/8'' 3/4'' D-62985
12 19 57.3 16 90dg
*D-68236
D-47955
12 28.6 60.3 22.2 90dg
*D-68242 Dovetail Bit
(inch) B: Angle
D-49367
1/4'' 1/2'' 1-7/8'' 5/8'' 60dg
*D-69456
D-49373
1/4'' 3/4'' 1-7/8'' 5/8'' 90dg
*D-69462
D-49389
1/4'' 1/2'' 1-3/4'' 1/2'' 90dg
*D-69478
D-49395
1/4'' 5/8'' 1-3/4'' 1/2'' 90dg
*D-69484
D-49404
1/2'' 1/2'' 2-1/8'' 1/2'' 90dg
*D-69490
D-49410 (mm)
1/2'' 5/8'' 2'' 1/2'' 90dg
*D-69509 D A1 L1 L2 B Part No.
D-62907
1/2'' 7/8'' 2-1/4'' 5/8'' 90dg 8 6.35 63.5 8 7.5 dg D-48050
*D-69515
D-49426 8 9.5 40 9.5 9 dg D-48066
1/2'' 3/4'' 2-1/4'' 5/8'' 90dg
*D-69521 D-48072
8 12.7 45 13 14 dg
1/2'' 1'' 2-3/8'' 3/4'' 90dg D-62913 *D-68323
D-49432 D-48088
1/2'' 1-1/8'' 2-3/8'' 7/8'' 90dg 8 15 52 14.3 15 dg
*D-69537 *D-68339
D-48094
12 19 63.4 22.2 7 dg
*D-68345
D-48103
Core Box Bit 12 25.4 64 22.2 14 dg
*D-68351
(inch)
D-49529
1/4'' 1/4'' 2-1/2'' 5/16'' 7.5 dg
*D-69624
D-49535
1/4'' 3/8'' 1-9/16'' 3/8'' 9 dg
*D-69630
D-49541
1/4'' 1/2'' 1-3/4'' 1/2'' 14 dg
*D-69646
(mm) 1/4'' 19/32'' 2-3/64'' 9/16'' 15 dg D-49557

D A1 L1 L2 R1 Part No. D-62991

1/2'' 3/8" 2-1/8" 3/8" 9dg
*D-69652
D-47977
8 6.35 38.3 6.35 3.2 1/2'' 1/2'' 2-1/4'' 1/2'' 14dg D-63002
*D-68264
D-47983 1/2'' 3/4'' 2-1/2'' 7/8'' 7 dg D-49563
8 7.9 40 8 4
*D-68270 1/2'' 1'' 2-1/2'' 7/8'' 14 dg D-49579
D-47999
8 9.5 41.3 9.5 4.8
*D-68286
D-48000
8 12.7 41.5 10 6.35
*D-68292
D-48016
8 15.8 44.5 12.7 7.9
*D-68301
D-48022
12 15.8 54 12.7 7.9
*D-68317
12 19 50.8 12.7 9.5 D-48038

12 25.4 57 16 12.7 D-48044

Ball Groove Bit Classic Plunge Cut Bit

(mm) (mm)
D A1 L1 L2 R1 Part No. D A1 L1 L2 R1 Part No.
8 9.5 41.3 8.3 4.8 D-48119 8 12.7 42 10 2.4 D-48206
8 12.7 44.5 11.4 6.4 D-48125
8 19 44.7 12.7 4 D-48212
8 15.9 47.6 14.8 7.9 D-48131
12 25.4 54 16 5.6 D-48228
8 19 50.8 18.2 9.5 D-48147
(inch) 12 31.8 57 19 8.7 D-48234

1/4'' 3/8'' 1-5/8'' 21/64'' 3/16'' D-49585 (inch)

D-49591 D-49672
1/4'' 1/2'' 1-3/4'' 29/64'' 1/4'' 1/4'' 1/2'' 1-21/32'' 3/8'' 3/32''
*D-69668 *D-69705
1/4'' 5/8'' 1-7/8'' 37/64'' 5/16'' D-49600 1/4'' 3/4'' 1-3/4'' 1/2'' 5/32'' D-49688
1/4'' 3/4'' 2'' 23/32'' 3/8'' D-49616 D-49694
1/2'' 1'' 2-1/8'' 5/8'' 7/32''
*D-69711
1/2'' 1-1/4'' 2-1/4'' 3/4'' 11/32'' D-49703
Plunge Cut Roundover Bit

Classical Plunge Bit

(mm)
D A1 L1 L2 R1 Part No.
D-48153
8 19 44.7 12.7 6.35
*D-68367
(mm)
8 25.4 47.6 16 9.5 D-48169
D A1 L1 L2 R1 Part No.
8 38.1 60.3 28.6 12.7 D-48175
8 12.7 41.5 9.5 2 D-48240
(inch)
8 19 43.1 11 3.2 D-48256
D-49622
1/4'' 3/4'' 1-3/4'' 1/2'' 1/4''
*D-69674 (inch)
D-49638
1/4'' 1'' 1-7/8'' 5/8'' 3/8'' 1/4'' 1/2'' 1-5/8'' 3/8'' 5/64'' D-49719
*D-69680
1/4'' 1-1/2'' 2-3/8'' 1-1/8'' 1/2'' D-49644 D-49725
1/4'' 3/4'' 1-11/16'' 7/16'' 1/8''
*D-69727

Ogee Bit Classical Plunge Cut - Top Bearing -

(mm)
D A1 L1 L2 R1 Part No.

8 19 42.4 11 3.2 D-48181 (mm)

8 31.3 47.9 16 6.35 D-48197 D A1 L1 L2 R1 Part No.

(inch) 8 22 54 13 3.2 D-48262

D-49650 (inch)
1/4'' 3/4'' 1-11/16'' 7/16'' 1/8''
*D-69696
1/4'' 1-15/64'' 1-7/8'' 5/8'' 1/4'' D-49666 1/4'' 7/8'' 2-1/8'' 1/2'' 1/8'' D-49731

1/2'' 3/4'' 1-15/16'' 7/16'' 1/8’’ D-63018

Ovolo Bit Beading Bit - with Bearing -

(mm)
D A1 L1 L2 R1 Part No.
D-48278
6 19 42.5 9.5 3.2
*D-68373 (mm)
D-48284
6 25.4 45.5 13.5 6.35 D A1 L1 L2 R1 Part No.
*D-68389
D-48430
(inch) 6 17 49.1 8 2.3
*D-68535
D-49747 D-48446
1/4'' 3/4'' 1-11/16'' 3/8'' 1/8'' 6 19 51.6 9.5 3.2
*D-69733 *D-68541
1/4'' 1'' 1-13/16'' 17/32'' 1/4'' D-49753 D-48452
6 20.3 50.5 10 4
*D-68557
1/2'' 3/4'' 1-7/8'' 3/8'' 1/8'' D-63024
D-48468
1/2'' 1'' 2-7/64'' 17/32'' 1/4'' D-63030 6 22.2 53.2 12.7 4.8
*D-68563
D-48474
6 28.6 55.5 14.5 7.9
*D-68579
Roundover Bit - with Bearing - 8 17.3 49.1 8 2.3
D-48480
*D-68585
D-48496
8 19 51.6 9.5 3.2
*D-68591
8 20.7 50.5 10 4 D-48505

8 22.2 53.2 13 4.8 D-48511

D-48527
8 25.4 54.7 13.5 6.35
(mm) *D-68600
D-48533
D A1 L1 L2 R1 Part No. 8 28.6 55.5 14.5 7.9
*D-68616
D-48290 D-48549
6 19 53.4 9.5 3.2 8 31.8 57.9 17 9.5
*D-68395 *D-68622
D-48309 D-48555
6 20.6 58.6 10 4 8 38.1 60.2 19 12.7
*D-68404 *D-68638
D-48315 D-48561
6 25.4 56.5 13.5 6.35 12 50.8 74.5 25.4 19
*D-68410 *D-68644
D-48321 (inch)
6 28.6 57.3 14.5 7.9
*D-68426
D-48337 D-49834
6 31.8 59.7 16.7 9.5 1/4'' 3/4'' 2-1/32'' 3/8'' 1/8''
*D-68432 *D-69820
D-48343 D-49840
8 17.3 51 8 2.3 1/4'' 7/8'' 2-1/8'' 1/2'' 3/16''
*D-68448 *D-69836
D-48359 D-49856
8 19 53.4 9.5 3.2 1/4'' 1'' 2-5/32'' 17/32'' 1/4''
*D-68454 *D-69842
D-48365 1/4'' 1-1/8'' 2-3/16'' 9/16'' 5/16'' D-49862
8 20.7 52.3 10 4
*D-68460
D-49878
D-48371 1/4'' 1-1/4'' 2-9/32'' 21/32'' 3/8''
8 22.2 55 12.7 4.8 *D-69858
*D-68476
D-49884
D-48387 1/4'' 1-1/2'' 2-3/8'' 3/4'' 1/2''
8 25.4 56.5 13.5 6.35 *D-69864
*D-68482
D-48393 1/2'' 2'' 2-61/64'' 1'' 3/4'' D-49890
8 28.6 57.3 14.5 7.9
*D-68498
D-48402
8 31.8 59.7 16.7 9.5
*D-68507 Cove Bit - with Bearing -
D-48418
8 38.1 62 19 12.7
*D-68513
D-48424
12 50.8 76.2 25.4 19
*D-68529
(inch)
D-49769
1/4'' 3/4'' 2-1/8'' 3/8'' 1/8''
*D-69749
D-49775
1/4'' 7/8'' 2-5/32'' 1/2'' 3/16''
*D-69755
D-49781
1/4'' 1'' 2-1/4'' 17/32'' 1/4''
*D-69761
D-49797 (mm)
1/4'' 1-1/8'' 2-1/4'' 9/16'' 5/16''
*D-69777 D A1 L1 L2 R1 Part No.
D-49806
1/4'' 1-1/4'' 2-5/16'' 21/32'' 3/8'' 8 15.9 49.2 6.35 1.6 D-48583
*D-69783
D-49812 8 17.5 49 6.35 2.4 D-48599
1/4'' 1-1/2'' 2-7/16'' 3/4'' 1/2''
*D-69799
8 19 45.6 9.7 3.2 D-48608
1/2'' 5/8'' 2-5/32'' 15/64'' 1/16'' D-63046
D-48614
1/2'' 3/4" 2-5/16'' 3/8'' 1/8'' D-63052 8 22.2 55.6 12.7 4.8
*D-68666
1/2'' 1-1/4'' 2-11/16'' 21/32'' 3/8'' D-63068 D-48620
8 28.6 55.5 12.7 7.9
D-63074 *D-68672
1/2'' 1-1/2'' 2-11/16'' 3/4'' 1/2'' D-48636
*D-69808 8 31.8 56 14 9.5
D-49828 *D-68688
1/2'' 2'' 2-15/16'' 1'' 3/4'' 8 38.1 58.3 15.4 12.7 D-48642
*D-69814
 D A1 L1 L2 R1 Part No. Rabbeting Bit - with Bearing -
(inch)
D-49915
1/4'' 5/8'' 1-15/16'' 1/4'' 1/16''
*D-69886
1/4'' 11/16'' 1-15/16'' 1/4'' 3/32'' D-49921
D-49937
1/4'' 3/4'' 1-13/16'' 3/8'' 1/8''
*D-69892 (mm)
D-49943
1/4'' 7/8'' 2-3/16'' 1/2'' 3/16'' D A1 A2 L1 L2 Part No.
*D-69901
D-49959 D-48739
1/4'' 1-1/8'' 2-3/16'' 1/2'' 5/16'' 8 31.8 9.5 54.6 12.2
*D-69917 *D-68769
D-49965 12 31.8 9.5 60.8 12.2 D-48745
1/4'' 1-1/4'' 2-13/64'' 17/32'' 3/8''
*D-69923
D-49971 (inch)
1/4'' 1-1/2'' 2-5/16'' 5/8'' 1/2''
*D-69939
D-50061
1/2'' 1-1/4'' 2-17/32'' 17/32'' 3/8'' D-63080 1/4'' 1-1/4'' 3/8'' 2-1/8'' 1/2''
*D-69995
1/2'' 1-1/2'' 2-9/16'' 5/8'' 1/2'' D-63096 D-50077
1/2'' 1-1/4'' 3/8'' 2-3/16'' 1/2''
*D-70007
1/2'' 1-3/4'' 2-11/16'' 3/4'' 5/8'' D-63105
1/2'' 2'' 2-7/8'' 7/8'' 3/4'' D-63111
Roman Ogee Bit - with Bearing -
Double Roundover Bit

(mm)
D A1 L1 L2 R1 Part No.

6 25.4 52.5 9.5 3.2 D-48804

(mm)
D-48810
D A1 L1 L2 R1 Part No. 6 28.6 55.3 13 4
*D-68775
D-48577 D-48751
8 28.6 50.8 12.7 4 8 28.6 55.3 13 4
*D-68650 *D-68781
(inch) D-48767
8 38.1 60 17.5 6.35
*D-68797
D-49909
1/4'' 1-1/8'' 2'' 1/2'' 5/32'' (inch)
*D-69870
D-50083
1/4'' 1-1/8'' 2-11/64'' 1/2'' 5/32''
*D-70013
Chamfer Bit - with Bearing - 1/4'' 1-1/2'' 2-3/8'' 11/16'' 1/4''
D-50099
B:Angle *D-70029

Ogee Bit - with Bearing -

(mm)
D A1 L1 L2 B Part No.
D-48658 (mm)
6 25.4 51 11 45dg
*D-68694
D-48664 D A1 L1 L2 R1 Part No.
6 22.2 56.1 12.7 25dg
*D-68703 8 31.8 55.6 12.7 4.8 D-48773
D-48670
8 30.2 54.5 12.7 45dg 8 38.1 58.9 16 6.35 D-48789
*D-68719
D-48686 (inch)
8 31.8 55.1 13.5 45dg
*D-68725
D-48692 1/4'' 1-1/4'' 2-3/16'' 1/2'' 3/16'' D-50108
8 34.9 58.8 16 45dg
*D-68731 D-50114
D-48701 1/4'' 1-1/2'' 2-5/16'' 5/8'' 1/4''
8 41.3 58.9 20 45dg *D-70035
*D-68747
D-48717
12 44.5 68.6 22.6 45dg
*D-68753 Cove with Fillet Bit - with Bearing -
12 50.8 70.9 27 45dg D-48723

(inch)
D-49987
1/4'' 1'' 2'' 3/8'' 45dg
*D-69945
D-49993
1/4'' 7/8'' 2-3/16'' 1/2'' 25dg
*D-69951
D-50005
1/4'' 1-3/16'' 2-1/8'' 1/2'' 45dg
*D-69967
D-50011 (mm)
1/4'' 1-1/4'' 2-11/64'' 17/32'' 45dg
*D-69973 D A1 L1 L2 R1 Part No.
1/4'' 1-3/8'' 2-5/16'' 5/8'' 45dg D-50027 D-48795
6 25.4 53.7 12.7 4.8
D-50033 *D-68806
1/4'' 1-5/8'' 2-5/16'' 13/16'' 45dg
*D-69989 (inch)
1/2'' 1-3/4'' 2-11/16'' 29/32'' 45dg D-50049 1/4'' 1'' 2-3/16'' 1/2'' 3/16'' D-50120
1/2'' 2'' 2-13/16'' 1-1/16'' 45dg D-50055 1/2'' 1-1/4'' 2-7/16'' 19/32'' 5/16'' D-63127
Full Bead Bit Keyhole Bit

(mm) (mm)
D A1 L1 L2 R1 Part No. D A1 L1 L2 Part No.

8 25.4 61.2 13 4.8 D-48826 D-48907

8 9.5 48 10.5
*D-68812
(inch)
(inch)
1/4'' 1'' 2-13/32'' 1/2'' 3/16'' D-50136 D-50217
1/4'' 3/8'' 1-7/8'' 13/32''
*D-70063

Fish Handrail Bit

Reversible Glue Joint Bit - Straight Profile -

(mm)
D A1 A2 L1 L2 Part No.
8 19 4.7 67.1 26 D-48832 (mm)

12 28.6 7.9 90.2 41 D-48848 D A1 A2 L1 L2 Part No.

(inch) 8 30.1 6.35 57.2 25.4 D-48913

1/4'' 3/4'' 3/16'' 2-5/8'' 1'' D-50142 12 41.3 7.9 76.2 25.4 D-48929
1/2'' 1-1/8'' 5/16'' 3-17/32'' 1-5/8'' D-50158 (inch)
D-50223
1/2'' 1-5/8'' 5/16'' 3'' 1''
*D-70079
Cove Moulding Bit
Tongue & Groove Assembly

(mm)
D A1 A2 L1 L2 Part No.

12 44.5 15.9 79.2 28.6 D-48854

(mm)
(inch) D A1 A2 L1 L2 Part No.
1/2'' 1-3/4'' 5/8'' 3-1/8'' 1-1/8'' D-50164 D-48935
12 41 8.5 71 19
*D-68828
(inch)
Multi Edge Beading Bit 1/2'' 1-39/64'' 11/32'' 2-51/64'' 3/4''
D-50239
*D-70085

Slotting Cutter - 3 Wing Slot Cutter -

(mm)
D A1 A2 L1 L2 Part No.

8 34.9 11.1 69.4 26 D-48860

12 57.2 22.2 102.6 47.5 D-48876 (mm)

(inch) D A1 A2 L1 L2 Part No.
1/4'' 1-3/8'' 㸫 2-3/4'' 1'' D-50170 8 47.6 12.7 59 2 D-48941
D-50186 8 47.6 12.7 59 2.5 D-48957
1/2'' 2-1/4'' 㸫 4'' 1-7/8''
*D-70041 D-48963
8 47.6 12.7 59 3
*D-68834
D-48979
8 47.6 12.7 59 4
Reversible Rail & Stile Bit *D-68840
D-48985
8 47.6 12.7 59 5
*D-68856
8 47.6 12.7 59 5.5 D-48991
(inch)     
D-50245
1/4'' 1-7/8'' 1/2'' 2-5/16'' 5/64''
*D-70091
(mm)
D-50251
D A1 L1 L2 Part No. 1/4'' 1-7/8'' 1/2'' 2-5/16'' 3/32''
*D-70100
12 41 78.5 23.4 D-48882 D-50267
1/4'' 1-7/8'' 1/2'' 2-5/16'' 1/8''
*D-70116
12 41 78.5 23.4 D-48898 D-50273
1/4'' 1-7/8'' 1/2'' 2-5/16'' 5/32''
(inch) *D-70122
D-50192 D-50289
1/2'' 1-5/8'' 3-3/32'' 29/32'' 1/4'' 1-7/8'' 1/2'' 2-5/16'' 3/16''
*D-70057 *D-70138
D-50295
1/2'' 1-5/8'' 3-3/32'' 29/32'' D-50201 1/4'' 1-7/8'' 1/2'' 2-5/16'' 7/32''
*D-70144
Top Bearing Straight Edge Beading Bit

(inch) (inch)
D A1 L1 L2 Part No. D A1 L1 L2 R1 Part No.
D-58497 1/2" 1'' 2-5/8'' 11/16'' 3/16'' D-63183
1/4" 1/2" 1-7/8" 1/4"
*D-69353
D-58506 1/2" 1-1/8'' 2-11/16'' 3/4'' 1/4'' D-63199
1/4'' 1/2" 2-5/8'' 1''
*D-69369

Hinge Mortising Bull Nose Bit -with Bearing-

(inch)
(inch)
D A1 L1 L2 R1 Part No.
D A1 L1 L2 Part No.
D-58562 1/2" 3/4'' 2-9/16'' 5/8'' 1/8'' D-63208
1/4" 1/2" 2-1/64" 3/4"
*D-69222
1/2" 7/8'' 2-15/16'' 1'' 3/16'' D-63214
1/2'' 1/2'' 2-3/8'' 3/4'' D-63149
1/2" 1'' 2-15/16'' 1'' 1/4'' D-63220

Bull Nose Bit

Classicla Bit

(inch) (inch)
D A1 L1 L2 R1 Part No. D A1 L1 L2 R1 Part No.

1/2" 7/8'' 2-3/8'' 3/4'' 1/8'' D-63155 D-63236

1/2" 1-3/8'' 2-9/16'' 5/8'' 3/16''
*D-70150

Roman Ogee Bit Triple Bead Bit

(inch) (inch)
D A1 L1 L2 R1 Part No. D A1 L1 L2 R1 Part No.
1/2" 1-1/4'' 2-29/32'' 1-27/64'' 3/32'' D-63161 1/2" 7/8'' 2-61/64'' 1'' 1/8'' D-63242

Point Cut Roundover Bit Handrail Bit

(inch) (inch)
D A1 L1 L2 R1 Part No. D A1 L1 L2 R1 Part No.
1/2" 3/8'' 2-1/4'' 3/8'' 3/16'' D-63177 1/2" 1-3/8'' 3-7/16'' 1-1/2'' 1/8'' D-63258
ACCESSORIES
Outdoor Power Equipment
Blade Nut, Cup, Clamp Washer, Grass Guard and Receive Washer
*with chisel blade (Arbor size 20mm)

Petrol Brushcutter
Receive Washer Blade Clamp Washer Blade Cup Blade Nut
Spindle
Model No. Market Arbor Size Size Size
Size Parts No. Parts No. Parts No. Parts No.
size (mm) (mm) (mm) (mm)
NUT:DA00000172
EM2500L, EM2500U, EM2600L, EM2601U M8x1.25LH  25.4 - DA00000162 - - 46.5 DA00000170 WASHER: DA00000171
EBH252L, EBH252U, EBH253L, EBH253U, EM2650LH,
M10x1.25LH  25.4 60 326821-5 50 346084-7 68 168526-9 264025-0
EM2650UH, EM2651LH, EM2651UH, EM2653LH, EM2654LH
EM2510LH, EM2511LH, EM2653LH M10x1.25LH 25.4 60 326840-1 50 346084-7 68 168526-9 264025-0
331861-0
EBH252L, EBH252U, EBH253L, EBH253U M10x1.25LH CANADA 25.4 60 326821-5
49 346660-7 68 168526-9 264088-6
THAILAND,
331861-0
EM2650LHN M10x1.25LH TURKEY - 60 326821-5
- - - - -
SOUTH, AFRICA
331861-0
EM2650LH M10x1.25LH USA 25.4 60 326821-5
49 346660-7 68 168526-9 264088-6
GAMBIA, SAUDI, 331861-0
EM2650UH M10x1.25LH ARABIA
- 60 326821-5
- - - - -
331861-0
EM2650UH M10x1.25LH USA 25.4 60 326821-5
49 346660-7 68 168526-9 264088-6
331861-0
EM2653LH M10x1.25LH CANADA 25.4 60 326821-5
49 346660-7 68 168526-9 264088-6
EM2652LHN M10x1.25LH USA - 66 332056-8 - - - - 252236-9
EBH341L, EBH341U, EM4350L, EM4350R, EM4350U,
M10x1.25LH  25.4 71 326823-1 49 346355-2 68 168526-9 264025-0
EM4351U, RBC411U, RBC412U, RBC413U, RBC414U
EM4350UH M10x1.25LH GUAM 25.4 71 332114-0 49 346660-7 68 168526-9 264088-6
KC00000016
EM3400L, EM3400U M10x1.25LH  25.4 - KC00000013  KC00000004 68 168526-9 264025-0
*EBH341U, *EM4350U, *EM4351U, M10x1.25LH  20 71 332051-8 49 346355-2 68 168526-9 264025-0
AC Brushcutter
Receive Washer Blade Clamp Washer Blade Cup Blade Nut
Spindle
Model No. Market Arbor size Size Size Size
Size Parts No. Parts No. Parts No. Parts No.
(mm) (mm) (mm) (mm)
UR2300 M10x1.25LH  25.4 - YA00000540 50 346084-7 68 168526-9 264025-0
UR3502 M10x1.25LH  - - YA00000540 - - - - -
Multi-tool attachments
Receive Washer Blade Clamp Washer Blade Cup Blade Nut
Spindle
Model No. Market Arbor size Size Size Size
Size Parts No. Parts No. Parts No. Parts No.
(mm) (mm) (mm) (mm)
EM400MP, EM402MP M10x1.25LH  25.4 60 326821-5 50 346084-7 68 168526-9 264025-0
331861-0
EM400MP M10x1.25LH USA 25.4 60 326821-5
49 346660-7 68 168526-9 264088-6
331861-0
EM401MP M10x1.25LH  25.4 60 326821-5
50 346084-7 68 168526-9 264025-0
EM403MP, EM404MP M10x1.25LH  25.4 64.5 144312-2 43 347105-8 68 457290-0 252236-9
EM405MP, EM406MP M10x1.25LH  - 64.5 144312-2 - - - - 252236-9
Cordless brushcutter / Cordless string trimmer
**with Grass Guard for Receive Washer Part No. 346622-5
*** Receive Washer with Grass Guard
Receive Washer Blade Clamp Washer Blade Cup Blade Nut
Spindle
Model No. Market Arbor size Size Size Size
Size Parts No. Parts No. Parts No. Parts No.
(mm) (mm) (mm) (mm)
42 **326518-6
DUR365U, DUR366L M10x1.25LH  25.4 50 346084-7 68 168526-9 264025-0
--- ***140L84-9
DUR368A, DUR368L M10x1.25LH  25.4 --- ***140L84-9 50 346084-7 68 168526-9 264025-0
DUR369A, DUR369L, UR101C, UR201C M10x1.25LH 25.4 64.5 144312-2 43 347104-0 68 457274-8 252236-9
Edger

Spindle Receive Washer Blade Clamp Washer Blade Nut

Model No.
Thread Arbor size (mm) Size (mm) Parts No. Size (mm) Parts No. Parts No.
EE2650H, EE400MP M10x1.25LH 25.4 54 326734-0 47 326381-7 264025-0

Cordless string trimmer

Receive Washer Receive Washer Grass Guard
Spindle Grass Guard Spindle
Model No. Size  Model No. Size for Receive
Size Parts No. for Receive Washer Size Parts No.
(mm) (mm) Washer
326683-1
DUR364L M8x1.25RH 44 319245-2 346857-8 DUR184L M8x1.25RH 36.5 144512-4
346857-8
DUR187L, DUR187U,
DUR366L M10x1.25LH 42 326518-6 346622-5 DUR188L, DUR188U
M8x1.25LH 36.5 144512-4 346857-8

DUR369N, UR202C M10x1.25LH 65 140N88-3 DUR189 M8x1.25RH 36.5 144512-4 346857-8

Blade selection guide For short grass For tall grass For bush

2-tooth, 3-tooth, 4-tooth, 8-tooth

*For cutting thick grass,
*Suitable for cutting wide space

80-tooth
*For trimming bush, thick grass and etc.

TCT
*Adopted TCT tips. *For thick grass

Brushcutter blades
Hole Dia.: 25.4mm
* Japanese Package
Blade dia. /
Application Thickness Model No. Part No.
No. of teeth
2-tooth blade
EBH252U, EBH253U, EM2500U/L, EM2510LH, EM2511LH, EM2600U/L, EM2650LH/UH, EM2651LH/UH, 197808-2
230mm / 2 2.0mm
EM2653LH, EM2654LH, EM400MP, EM401MP, EM402MP, EM403MP, EM404MP D-66058
230mm / 2 2.0mm DUR369A/L, EM2510LH, EM2511LH, EM2653LH, EM2654LH, UR101C, UR201C 197997-3
255mm / 2 2.0mm DUR369A/L, UR101C, UR201C 198345-9
305mm / 2 2.0mm EBH341L/U, EM4350LH/UH, EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U 195624-6
3-tooth blade
DUR368A, DUR368L, DUR369A, DUR369L, EBH252U, EBH253U, EM2500U/L, EM2510LH, EM2511LH,
195298-3
230mm / 3 3.0mm EM2600U/L, EM2650LH/UH, EM2651LH/UH, EM2653LH, EM2654LH, UR101C, UR201C, EM400MP,
D-66020
for tall, thick grass, EM401MP, EM402MP, EM403MP, EM404MP
scrub and tangled EBH340U/R, EBH341L/U/R, EM3400U/L, EM4350UH/LH/RH, EM4351UH 195299-1
255mm / 3 3.0mm
undergrowth RBC411U, RBC412U, RBC413U, RBC414U, UR101C, UR201C D-66036
195300-2
305mm / 3 3.0mm EBH341L/U, EM4350LH/UH, EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U
D-66042
4-tooth blade
DUR361U, DUR362U, EBH252U, EBH253U, EM2500U/L, EM2510LH, EM2511LH, EM2600U/L EM2650LH/UH, B-14118
230mm / 4 1.8mm
EM2651LH/UH, EM2653LH, EM2654LH, EM400MP, EM401MP, EM402MP, EM403MP, EM404MP D-66008
for tall grass and 230mm / 4 1.8mm DUR365U, DUR368A/L, DUR369A/L, UR101C, UR201C, EM401MP, EM402MP 195150-5
scrub 255mm / 4 2.0mm EBH340U/R, EBH341L/U/R, EM4350UH/LH/RH, EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U B-14124
196895-8
255mm / 4 2.0mm DUR369A, DUR369L, EM3400U/L, UR101C, UR201C
D-66014
8-tooth blade
DUR361U, DUR362U, EBH252U, EBH253U, EM2500U/L, EM2510LH, EM2511LH, EM2600U/L, EM2650LH/UH,
230mm / 8 1.8mm B-14130
for thick grass and EM2651LH/UH, EM2653LH, EM2654LH, EM400MP, EM401MP, EM402MP, EM403MP, EM404MP
scrub EBH340U/R, EBH341L/U/R, EM3400U/L, EM4350UH/LH/RH, EM4351UH, RBC411U, RBC412U,
255mm / 8 2.0mm B-14146
RBC413U, RBC414U
Saw blade
for bushes and thin DUR361U, DUR362U, EBH252U, EBH253U, EM2500U/L, EM2510LH, EM2511LH, EM2600U/L EM2650LH/UH,
tree trunks 230mm / 80 1.8mm B-14152
EM2651LH/UH, EM2653LH, EM2654LH, EM400MP, EM401MP, EM402MP, EM403MP, EM404MP
Not available in
some countries due 255mm / 80 EBH340U/R, EBH341L/U/R, EM3400U/L, EM4350UH/LH/RH, EM4351UH, RBC411U, RBC412U,
2.0mm B-14168
to local regulation RBC413U, RBC414U
TCT Saw blade
B-50697
EBH252U, EBH253U, EBH340U/R, EBH341U/L, EBH341R, EM2500U/L, EM2510LH, EM2511LH,
230mm / 36 1.25mm *A-56926
EM2600U/L, EM2650L/U, EM2651L/U, EM2653LH, EM2654LH, EM4340L
D-65981
for gnarled bushes 230mm / 36 1.25mm DUR369A/L, UR101C, UR201C 198023-1
and thin tree trunks
Not available in 230mm / 32 1.25mm DUR369A/L, UR101C, UR201C 199248-0
some countries due EBH340U/R, EBH341L/U/R, EM3400U/L, EM4350UH/LH/RH, EM4351UH, RBC411U, RBC412U, *A-56932
250mm / 40 1.25mm
to local regulation RBC413U, RBC414U D-65997
250mm / 40 1.25mm DUR369A/L, UR101C, UR201C 198024-9
250mm / 36 1.25mm DUR369A/L, UR101C, UR201C 199652-3
 Blade dia. /
Application Thickness Model No. Part No.
No. of teeth
Chisel blade
For brush and thin 200mm / 22
tree trunks and Hole Dia.: 1.6mm EM4351UH, EM4350UH, EBH341U 196242-3
new growth. 20mm
Not available in225mm / 24
some countries due Hole Dia.: 1.8mm EM4351UH, EM4350UH 196243-1
to local regulation20mm
Special flunge (Dia: 20mm)࣭࣭࣭Part No.332051-8 (Including Chisel blade guard set 196480-7, 196481-5)

Edger blade
Blade dia. /
Thickness Model No. Part No.
No. of teeth
203mm / 2 2.5mm EE2650H, EE400MP 196745-7

String trimmer head

(for grass, light weeds)
* with adapter (Poly bag with header)
Arbore Cord/
Description Ref. Size Model No. Part No.
size Line
Bump & Feed DUR365U, DUR366L, DUR368A/L, DUR369A/L/N,
There is no need to ever EBH252U/L, EBH253U/L, EBH341U, EM3400L,
split the trimmer head EM2510LH, EM2511LH, EM2650UH/LH, 2.4mm x
to replace or remove UN-74L 4.4'' M10x1.25LH - 196324-1
EM2651UH/LH, EM2653LH, EM2654LH, UR101C, 3.6m
line. This head is simple
to operate with UR201C, UR202C, EM400MP, EM401MP, EM403MP,
reliability in EM404MP, EM405MP, EM406MP
performance. DUR369A /L/N, EM4350UH/RH/LH, EM4351UH, 2.4mm x Poly bag
UN-72L 5'' M10x1.25LH 198266-5
UR101C UR201C UR202C 6m with header
Bump & Feed
1.65mm x Poly bag 198853-0
3'' M8x1.25RH UR100D
8m with header EU:198854-8

2.0mm x Poly bag 198972-2

95-M8R 4'' M8x1.25RH DUR189
3m with header EU:198971-4
2.0mm x Poly bag 198386-5
95-M8L 4'' M8x1.25LH DUR187U/L, DUR188U/L, EM2500U/L, EM2600U/L
3m with header EU:198385-7
DUR365U, DUR366L, DUR368A/L, DUR369A/L, EBH252U/L, 2.0mm x Poly bag 198892-0
EBH253U/L, EM2510LH, EM2511LH, EM2650UH/LH, 3m with header EU:198893-8
95-M10L 4'' M10x1.25LH EM2651UH/LH, EM2653LH, EM2654LH, UR101C, UR201C,
2.4mm x Poly bag 197804-0
UR202C, EM400MP, EM401MP, EM403MP, EM404MP,
3m with header EU:197993-1
EM405MP, EM406MP
Bump & Feed Bump & Feed 4'' Low 2.0mm x Poly bag
profile
M8x1.25RH DUR189, DUR364L 197297-1
ECO 4R 3m with header
Bump & Feed 2.4mm x
4'' M8x1.25RH ER2550LH, ER2650LH, ER2600L, ER400MP Blister pack A-89137
4R 3m
Bump & Feed 4'' Low 2.0mm x Poly bag
profile
M8x1.25LH DUR187L/U DUR188L/U 196589-5
ECO 4L 3m with header
Bump & Feed 4'' Low DUR365U, DUR366L, DUR368A/L, DUR369A/L/N, UR101C, 2.0mm x Poly bag
profile
M10x1.25LH 197296-3
ECO 4L UR201C, UR202C 3m with header
Bump & Feed 3.0mm x Poly bag
5'' M10x1.25LH EM3400U/L, EBH341U 161342-8
ECO 5 2.5m with header
EBH252U/L, EBH253U/L, EM2510LH, EM2511LH,
EM2650UH/LH, EM2651UH/LH, EM2653L, EM2654L,
Bump & Feed EM3400U/L, EBH340U, EBH341U/L/R, EM4350UH/LH/RH, 2.4mm x
5'' M10x1.25LH Blister pack B-05131
Z5L EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U, 3m
EM400MP, EM401MP, EM403MP, EM404MP, EM405MP,
EM406MP
Bump & Feed EBH341U/L/R, EM4350UH/LH/RH, EM4351UH, RBC411U, 3.0mm x
6'' M10x1.25LH Carton box 197030-1
ECO 6 RBC412U, RBC413U, RBC414U 3m
Automatic feed and Line will be feeded 2.4mm x
Bump & Feed about 3cm, in either Ultra Auto 4R 4'' M8x1.25RH ER2550L, ER2650L, ER2600L, ER400MP Carton box B-03006
3m
one of the following
cases
DUR187U/L, DU188U/L, EM2500U/L, EM2600U/L,
-Head rotaition are EBH252U/L, EBH253U/L, EM2510LH, EM2511LH,
M8&10x1.25 2.4mm x
reached at 8,500rpm. 4'' EM2650UH/LH, EM2651UH/LH, EM2653LH, EM2654LH, Carton box *B-02945
LH 3m
-Bottom of the head EM400MP, EM401MP, EM403MP, EM404MP, EM405MP,
is bumped on the Ultra Auto 4L EM406MP
ground when it is
EBH252U/L, EBH253U/L, EM2510LH, EM2511LH,
spinning.
EM2650UH/LH, EM2651UH/LH, EM2653LH, EM2654LH, 2.4mm x
4'' M10x1.25LH Blister pack B-05125
EM400MP, EM401MP, EM403MP, EM404MP, EM405MP, 3m
EM406MP
EBH340R, EBH341U/L/R, EM4350UH/LH/RH, EM4351UH, 3.0mm x
Ultra Auto 6L 6'' M10x1.25LH Blister pack *A-81658
RBC411U, RBC412U, RBC413U, RBC414U 2m
Eyelet 2pcs/set for Bump & Feed 4L/4R/Z5L, Ultra Auto 4R/4L/6L Part No. A-15992

Manual EBH252U/L, BH253U/L, EM2510LH, EM2511LH,

EM2650UH/LH, EM2651UH/LH, EM2653L, EM2654L,
EM3400U/L, EBH340U/R, EBH341U/L/R, EM4350UH/LH/RH, 2.4mm x
5'' _ Carton box B-02951
EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U, 0.75m x 2
EM400MP, EM401MP, EM403MP, EM404MP, EM405MP,
EM406MP
 Line Character

Sharpness Energy Saving Quietness

Round A A

Square AA

Four-Leaf A AA AA

Nylon cord

Size Part No. Size Part No. Size Part No.

1.65mmx15m DA00000003 2.4mmx5m B-01971 3.0mmx4m B-07375

Four-leaf clover-like cross section

Spiral cord body

Size Color Part No. Size Color Part No.

198859-8 198862-9
1.65mmx15m Blue 1.65mmx30m Blue
EU:198860-3 EU:198863-7
2.0mmx15m Green 197472-9 2.0mmx160m Green 197474-5
2.0mmx30m Green 197473-7 2.0mmx280m Green 197475-3
2.4mmx15m Orange 198501-1 2.4mmx120m Orange 198503-7
2.4mmx30m Orange 198502-9 2.4mmx180m Orange 198504-5
2.7mmx15m Red 198505-3 2.7mmx90m Red 198507-9
2.7mmx30m Red 198506-1 2.7mmx160m Red 198508-7

Size Color Part No. Size Color Part No. Size Color Part No.
1.65mmx15m Blue E-01731 1.65mmx30m Blue E-01747 1.65mmx445m Blue E-01753
2.0mmx15m Green E-01769 2.0mmx30m Green E-01775 2.0mmx310m Green E-01781
2.4mmx15m Orange E-01797 2.4mmx30m Orange E-01806 2.4mmx225m Orange E-01812
2.7mmx15m Red E-01828 2.7mmx30m Red E-01834 2.7mmx30m Red E-01840

Protection guard
Shape Type Model No. Description Part No.
Protector Universal DUR369A, DUR369L, UR101C, UR201C With protector extention 191B54-1
With protector extention, protector
EM401MP 195349-2
cover and protector clamp
EM401MP Without protector extention 451566-7
EM2500U/L, EM2600U/L Without protector extention DA00000525
EBH252U, EBH253U, EM2510LH, EM2511LH, EM2650LH/UH, EM2651LH/UH,
Without protector extention 452260-4
EM2653LH, EM2654LH, EM400MP
EM403MP, EM404MP Without protector extention 457271-4
EBH340U, EM3400U/L, RBC411U Without protector extention 451878-8
With protector clamp Without
EBH341U/L, EM4350UH/LH/RH, EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U 196052-8
protector extention
EBH341U/L, EM4350UH/LH/RH, EM4351UH, RBC411U, RBC412U, RBC413U, RBC414U Without protector extention 452259-9
Extension Universal EM401MP Toolless / Without cord/line cutter 140583-9
for Trimmer head
EBH252U, EBH253U, EM2650LH/UH, EM2651LH/UH, EM2510LH, EM2511LH,
EM2653LH, EM2654LH, EBH341U/L, EM4350UH/LH/RH, EM4351UH, RBC411U, Toolless / With cord/line cutter 135398-7
RBC412U, RBC413U, RBC414U, EM400MP
EM404MP Toolless / Without cord/line cutter 144316-4
EBH340U, EM3400U/L, RBC411U Toolless / WIth cord/line cutter 140424-9
EM2500U/L, EM2600U/L Without cord/line cutter DA00000526
for Cutting blade Exclusive RBC411U, RBC412U, RBC413U, RBC414U With protector clamp 196051-0
EM4350RH, RBC411U, RBC412U, RBC413U, RBC414U 453874-2
EM402MP With protector clamp 125478-7
EBH340R XNR0000302
EBH341R XNR0000501
 Shape Type Model No. Description Part No.
for Trimmer head Exclusive UR100D With cord/line cutter 135950-1
DUR184L DUR189 Without cord/line cutter 456651-1
For AUSTRALIA
DUR189 458531-7
Without cord/line cutter
DUR187L, DUR187U, DUR188L, DUR188U Without cord/line cutter 457324-9
DUR364L Without cord/line cutter 455622-5
DUR365U, DUR366L With protector clamp 197295-5
DUR369A/L/N, UR101C, UR201C, UR202C Narrow type 191B55-9
ER2550L, ER2650L 195803-6
ER2600L DA00000630
EM2652LHN Narrow type 196117-6
197806-6
EM2510LH, EM2511LH, EM2653LH, EM2654LH
EU:197995-7
Narrow type / Without cord/line
Conversion kit for Cutting EM405MP, EM406MP 457273-0
cutter
blade (Protector for
EBH341R XNR0000342
Cutting blade, Protector
clamp and blade EBH341U/L, EM4350UH/LH/RH, EM4351U RBC411U, RBC412U, RBC413U, RBC414U 197756-5
clamping washer & nut. )
DUR365U, DUR368A/L 197294-7
for Chisel blade for 200mm With receive washer Part No.
EM4351UH, EM4350UH, EBH341U 196480-7
blade 332051-8

for 225mm With receive washer Part No.

EM4351UH, EM4350UH 196481-5
blade 332051-8

Plastic blade set

Plastic blade set Replacement plastic blade
Model No.
Arbore size Cutting width Part No. per pkg. Part No.

198850-6
UR100D M8x1.25RH 230mm 198848-3 5
EU:198851-4
X5

DUR187L/U, DUR188L/U,
DUR189, DUR364L,
DUR365U, DUR366L, M8x1.25RH
DUR368A/L, DUR369A/L/N, M8x1.25LH 255mm 198383-1 12 198426-9
UR101C, UR201C, M10x1.25LH
x12 EM403MP, EM404MP,
EM405MP, EM406MP
DUR369A/L/N, UR101C,
M10x1.25LH 305mm 199868-0 12 199870-3
UR201C

Spool assembly

Model No. Part No.

UR180D, DUR181 196146-9

Shoulder strap assembly

Comfort: Part No.122906-3
Single: Part No.125516-5
*Poly bag with header
Type Model No. Part No.
DUR181, DUR184L, DUR187L, DUR188L, DUR189, DUR364L, DUR365U, UR100D, UR180D, DUR366L,
Single DUX60, EBH252L, EBH253L, EBH341L, EM2510LH, EM2511LH, EM2650LH, EM2651LH, EM2653LH, 125516-5
EM2654LH, EM3400L, EN4950H, EN4951SH, EY2650H ,EX2650LH, RBC411U, RBC412U
Single DUR187U, DUR188U, DUR368A/L, DUR369L, RBC413U, RBC414U 125520-4
Single RBC411U 123633-5
Single UR101C, UR201C 123422-8
W RBC411U, RBC412U, EM3400U 125802-4
W EM4350LH 126187-1
DUR369A, EBH252U, EBH253U, EBH341U, EM2650UH, EM2651UH, EM4350UH, RBC411U, RBC412U,
Comfort 122906-3
RBC413U, RBC414U
Comfort DUR369A, EBH252U, EBH253U, EBH341U, EM2650UH, EM2651UH, EM4350UH, EM4351UH *199378-7
String trimmer harness for DPC01 String trimmer
Cutting width: 410mm

item Part No. Spindle size:

A 191E43-4 M8 x 1.25RH

B 197243-4

EX2650LH ER400MP
Attachments for loop handle brushcutter
Brushcutter
Do not use following attachiments with DUR369L, DUR369N, UR201C & UR202C.
Cutting width: 300mm
Shape Model No. Part No.
Hedge trimmer EM2650LH, Spindle size:
198579-4
Blade length: 490mm EM2651LH,
M10 x 1.25LH
EM2653LH,
EN2654LH

Pole saw EM2650LH, 196315-2 DUX60 EM401MP

Bar length: 25cm (10'') EM2651LH,
Saw chain: 91VXL-39links EM2653LH, Brushcutter
EN2654LH
Blade size: 230mm
Spindle size:
M10 x 1.25LH
Cultivator EBH251L, B-04818
EM2510LH,

DUX60, EX2650LH EM402MP

Brushcutter

Coffee harvester EM2651LH B-80210 Cutting width: 450mm

Spindle size:
M10 x 1.25LH

Coffee harvester EJ2650LH, EM2650L 197666-6

DUX60, EX2650LH EM403MP
DUX60 with CE mark EM404MP

Brushcutter
Cutting width: 450mm
Spindle size:
Attachments for back pack brushcutter M10 x 1.25LH
Coffee harvester EBH340R, EBH341R B-80226

DUX60, EX2650LH EM405MP

DUX60 with CE mark EM406MP

Coffee harvester EBH340R, EBH341R 197163-2 Pole saw

Bar length: 25cm (10'')

Saw chain: 91VXL-39links

DUX60, EX2650LH EY401MP

Blower
Multi-tool attachments

Shape Model No. Part No.

Brushcutter
Cutting width: 420mm
Spindle size:
M10 x 1.25LH

EX2650LH EM400MP EX2650LH UB400MP

 Shape Model No. Part No. Shape Model No. Part No.
Pole hedge trimmer Shaft extension attachment

Angle adjustment S For Pole saw, Pole hedge trimmer and Coffee harvester

DUX60, EX2650LH LE400MP

DUX60, EX2650LH EN401MP
Straight

DUX60, EX2650LH EN410MP

Ground trimmer

DUX60, EX2650LH EN420MP

Cultivator
Cultivating width: 160mm

DUX60, EX2650LH KR400MP

Cultivator
Cultivating width: 220mm
* Rotor LR set㸸
P/N㸸199204-0

DUX60, EX2650LH, KR401MP

Power brush
* Brush wheel (1pc)
P/N㸸XNR0000548

DUX60, EX2650LH, BR400MP

Power sweep
* Sweeper wheel (1pc)㸸
P/N㸸XNR0000549

DUX60, EX2650LH, SW400MP

Coffee harvester

DUX60, EX2650LH EJ400MP

Edger attachment

DUX60, EX2650LH EE400MP

196 Accessories
Saw Chain and Guide Bar
(Wood/Metal)
Drilling

B Depth Gauge C Chain Pitch D Drive Link E Gauge

(Masonry)

F Cutter Type
Drilling
Fastening

A Guide Bar Length

4 5 7
Screw Bit Sets

A Guide Bar Length D Drive Link 1 2 3

39 40 15 14 13 12 11 10 6 9 8
Drill and

38 16
Guide bar's length is The length of saw chain is 37
represented by the cutting determined by counting the 36 17
35
length,which is different from number of drive links in the saw 34 18 19 20 21 22 23 24 25
33 32 31
its total length. chain. 30 29 28 27 26

Guide Bar Length

Cutting

B Depth Gauge E Gauge .043” .050” .058”

(1.1mm) (1.3mm) (1.5mm)
Depth gauge means the gap between the top of Chain Gauge is the drive link's thickness where it fits
the depth gauge and the top of the cutter and into the guide bar groove, matching the guide bar
determines how deep the cutting teeth gets into gauge. The gauge of the chain and the gauge of the
Reciprosawing

the wood. bar must match.

Jigsaw /

C Chain Pitch F Cutter Type MICRO SEMI CHAMFER FULL

CHISEL CHISEL CHISEL CHISEL
Chain pitch is the size of the chain,and is defined as
the distance between any three consecutive rivets Abbreviation MC SC CC FC
divided by two. Pitch is important because the drive
Brushing

sprocket must be the same pitch as the chain.

End View
=1/2

Guide Bar Type Guide Bar Maintenance

Bonded Abrasive

Sprocket Nose Bars Chain Tension

Sprocket nose bars have a rotating sprocket mounted on at the tip of the bar. As the From time to time the saw chain tension
chain moves along the bar,the sprocket teeth carry the chain around the tip before use. The saw chain may become
smoothly with less friction. loose after many hours of use.
Coated Abrasive

Hard Nose Bars(Solid Bar) File Bar Edge

High wear resistant stellite is welded onto the tip. Hard nose bars are made for File bar edge with a flat file to keep 90°once
difficult situation, including fire-damaged forests,deserts,or sandy environments. a week. 90°
Multi Tool

Clean Guide Bar

Clean out the chips and sawdust every
time when you sharpen or replace the saw
Carving Bars chain
Carving bars are made of high-quality steel and high wear resistant stellite is welded
Diamond

onto the tip. The small nose radius is designed for precision cutting. The carving bars
are made for especially pruning and carving.
Bar Nose Grease
Lubricate a whole sprocket regularly to make
sure that the saw chain can rotate with less
friction.
Grease
Routering
Planing /

Sharpening Saw Chain

Round File and File holder File Depth gauge jointer Depth gauge jointer
1/5 Flat file
After sharpening the chain, check the height of the
depth gauge using the chain gauge tool.
OPE

File holder
30
The file can be guided more easily if a file holder
is employed. The file holder has markings for
the correct sharpening angle of 30° (align the
markings parallel to the saw chain) and limits
Flat file
Miscellaneous

the depth of penetration (to 4/5 of the file

Saw chain
diameter). Saw chain
File
Chain Saws
Guide Bar / Saw Chain / Guide Bar Cover / Drive sprocket
Cutter type: CC: Chamfer chisel, SC: Semi chisel, MC : Micro chisel, FC: Full chisel
* Pole saw attachment (196315-2)
**without Clamshell pack

Bar
Guide Bar Saw Chain Drive sprocket
Cover

㸦Clamshell
No. of drive

㸦Carton㸧
Cutter type
Bar length

Model

OREGON /
Part No.

DOLMAR

Pack 㸧
Part No.

Part No.

Part No.

Part No.
Mount

Gauge
Motor

tooth
Drive

Pitch
Type

Type

Type
links
No.

Petrol Chain Saws

EY2650H,
Sprocket 3/8'' 91VXL / Sprocket
EY401MP 25cm/10'' A218 7 191G11-9 39 1.3mm/ .050'' SC 191H20-4 191H91-1 452093-7 XTM0000014
nose bar LP 196 3/8''LP
196315-2*
Clutch
25cm/10'' A041 Sprocket 7 191G22-4 40 3/8'' 191H08-4 191H79-1 452093-7
EA3110T 1.3mm/ .050'' 91PX / 492 CC drum MR00286238
nose bar LP
30cm/12'' A041 7 MR00288413** 46 191H10-7 191H81-4 419561-3 3/8''LP
419559-0
30cm/12'' A041 7 191G15-1 46 191H01-8 191H72-5
952010630
EA3200S, Sprocket 3/8'' 419560-5
35cm/14'' A041 7 191G16-9 52 1.1mm/ .043'' 90PX / 291 CC 191H02-6 191H73-3
EA3201S, nose bar LP 952010640
EA3202S, 419560-5
40cm/16'' A041 7 191G17-7 56 191H03-4 191H74-1 Clutch
EA3203S, 952010640
drum 140484-1
EA3500S, 419559-0
30cm/12'' A041 7 191G23-2 46 191H10-7 191H81-4 3/8''LP
EA3501S, 952010630
EA3502S, Sprocket 3/8'' 419560-5
EA3503S 35cm/14'' A041 7 191G24-0 52 1.3mm/ .050'' 91PX / 492 CC 191H11-5 191H82-2
nose bar LP 952010640
419560-5
40cm/16'' A041 7 191G25-8 56 191H12-3 191H83-0
952010640
419559-0
35cm/14'' A041 7 191G24-0 52 191H11-5 191H82-2 Clutch
EA3600F, Sprocket 3/8'' 952010630
1.3mm/ .050'' 91PX / 492 CC drum 165725-4
EA3601F nose bar LP 419560-5
40cm/16'' A041 7 191G25-8 56 191H12-3 191H83-0 3/8''LP
952010640
419560-5
35cm/14'' A041 7 191G24-0 52 191H11-5 191H82-2
952010640
Clutch
Sprocket 3/8'' 419560-5
40cm/16'' A041 7 191G25-8 56 1.3mm/ .050'' 91PX / 492 CC 191H12-3 191H83-0 drum 143339-9
nose bar LP 952010640
3/8''LP
419560-5
45cm/16'' A041 7 191G26-6 62 191H13-1 191H84-8
EA4300F, 952010640
EA4301F 419559-0
33cm/13'' K041 Sprocket 10 191G38-9 56 95VPX 191H22-0 191H93-7
952010630
nose bar / 484 Clutch
419560-5
38cm/15'' K041 10 191G39-7 64 1.3mm/ .050'' .325'' MC 191H23-8 191H94-5 drum 158927-9
952010640
Narrow Narrow .325''
419560-5
45cm/18'' K041 Karf 10 191G40-2 72 Karf 191H24-6 191H95-3
952010640
419559-0
33cm/13'' A095 High 10 191G44-4 56 191H28-8 191H99-5
952010630
durability 21BPX / 419560-5
38cm/15'' A095 10 191G45-2 64 1.5mm/ .058'' .325'' MC 191H29-6 191J00-2
Sprocket 086 952010640 Rim
nose bar sprocket
45cm/18'' K095 10 191G46-0 72 191H30-1 191J01-0 952020650 181224040
.325''
High 419560-5 SM7-7
38cm/15'' A095 10 191G45-2 64 191H35-1 191J06-0
durability 21LPX / 952010640
1.5mm/ .058'' .325'' FC
Sprocket 686
45cm/18'' K095 10 191G46-0 72 191H36-9 191J07-8 952020650
nose bar
EA5000P,
419560-5
EA5001P 38cm/15'' K095 High 11 191G50-9 56 191H42-4 --
952010640
durability 73DPX /
45cm/18'' K095 11 191G51-7 64 1.5mm/ .058'' 3/8'' SC 191H43-2 -- 952020640
Sprocket 093
nose bar Rim
50cm/20'' K095 11 191G52-5 72 191H44-0 -- 952020650 sprocket
026224010
419560-5 3/8'' SM7-
38cm/15'' K095 High 11 191G50-9 56 191H48-2 --
952010640 7
durability 73LPX /
45cm/18'' K095 11 191G51-7 64 1.5mm/ .058'' 3/8'' FC 191H50-5 -- 952020640
Sprocket 099
50cm/20'' K095 nose bar 11 191G52-5 72 191H52-1 -- 952020650
High 419560-5
38cm/15'' A095 10 191G45-2 64 191H29-6 191J00-2
durability 21BPX / 952010640
1.5mm/ .058'' .325'' MC
Sprocket 086 Rim
45cm/18'' K095 10 191G46-0 72 191H30-1 191J01-0 952020650
nose bar sprocket
181224040
High 419560-5 .325''
38cm/15'' A095 10 191G45-2 64 191H35-1 191J06-0
durability 21LPX / 952010640 SM7-7
1.5mm/ .058'' .325'' FC
Sprocket 686
45cm/18'' K095 10 191G46-0 72 191H36-9 191J07-8 952020650
nose bar
419560-5
38cm/15'' K095 High 11 191G50-9 56 191H42-4 --
EA5600F 952010640
durability 73DPX /
45cm/18'' K095 11 191G51-7 64 1.5mm/ .058'' 3/8'' SC 191H43-2 -- 952020640
Sprocket 093
nose bar Rim
50cm/20'' K095 11 191G52-5 72 191H44-0 -- 952020650 sprocket
026224010
419560-5 3/8'' SM7-
38cm/15'' K095 High 11 191G50-9 56 191H48-2 --
952010640 7
durability 73LPX /
45cm/18'' K095 11 191G51-7 64 1.5mm/ .058'' 3/8'' FC 191H50-5 -- 952020640
Sprocket 099
50cm/20'' K095 nose bar 11 191G52-5 72 191H52-1 -- 952020650
 Bar

Guide Bar Saw Chain Drive sprocket
Cover

㸦Clamshell
No. of drive

㸦Carton㸧
Cutter type
Bar length
Model

OREGON /
Part No.

DOLMAR

Pack 㸧
Part No.

Part No.

Part No.

Part No.
Mount

Gauge
Motor

tooth
Drive

Pitch
Type

Type

Type
links
No.

High 419560-5 Rim

38cm/15'' A095 10 191G45-2 64 191H29-6 191J00-2
durability 21LPX / 952010640 sprocket
1.5mm/ .058'' .325'' FC 181224040
Sprocket 686 .325''
45cm/18'' K095 10 191G46-0 72 191H30-1 191J01-0 952020650
nose bar SM7-7
High 419560-5
38cm/15'' K095 11 191G50-9 56 191H48-2 --
EA6100P, durability 952010640
EA6101P 45cm/18'' K095 Sprocket 11 191G51-7 64 191H50-5 -- 952020640 Rim
50cm/20'' K095 nose barr 11 191G52-5 72 73LPX / 191H52-1 -- 952020650 sprocket
1.5mm/ .058'' 3/8'' FC 026224010
099 3/8'' SM7-
45cm/18'' K095 Solid bar with 11 191G56-7 64 191H50-5 -- 952020650
7
50cm/20'' K095 replaceable 11 191G57-5 72 191H52-1 -- 952020650
60cm/24'' K095 tip 11 191G58-3 84 191H54-7 -- 952020660
35cm/14'' D009 11 445035655** 56 191H48-2 -- 952020640
38cm/15'' D009 High 11 445038655** 60 191H49-0 -- 952020640
43cm/17'' D009 durability 11 445043655** 64 191H50-5 -- 952020640
45cm/18'' D009 Sprocket 11 445045655** 68 191H51-3 -- 952020650
50cm/20'' D009 nose bar 11 445050655** 72 191H52-1 -- 952020650
EA7300P, 60cm/24'' D009 11 445060655** 84 191H54-7 -- 952020660 Rim
EA7301P, 45cm/18'' D009 --- 445045455** 68 73LPX / 191H51-3 -- 952020650 sprocket
1.5mm/ .058'' 3/8'' FC 119224070
EA7900P, 50cm/20'' D009 --- 445050455** 72 099 191H52-1 -- 952020650 3/8'' SD7-
EA7901P Solid bar 7
60cm/24'' D009 --- 445060455** 84 191H54-7 -- 952020660
70cm/28'' D009 --- 445070455** 94 191H55-5 -- 952030680
45cm/18'' D009 ??? 445045555** 68 191H51-3 -- 952020650
Solid bar with
50cm/20'' D009 11 445050652** 72 191H52-1 -- 952020650
replaceable
60cm/24'' D009 11 445060555** 84 191H54-7 -- 952020660
tip
70cm/28'' D009 11 445070652** 94 191H55-5 -- 952030680
Cordless Chain Saws
DUC121, 16cm/ without
___ --- 191G59-1 42 1.3mm/ .050'' 1/4'' 25AP / 466 MC 191G95-7 191H66-0 416311-7 Sprocket1/4" 221527-9
DUC122 6-1/4'' sprocket
25cm/10'' ___ Solid carving bar --- 191G61-4 60 1.3mm/ .050'' 1/4'' 25AP / 466 MC 191G96-5 191H67-8 452093-7 Sprocket 1/4" 198259-2
DUC204 20cm/8" A041 Sprocket 7 191G13-5 33 3/8'' 191G99-9 191H70-9 458503-2
DUC254 1.1mm/ .043'' 90PX / 291 CC
25cm/10'' A041 nose bar 7 191G14-3 40 LP 191H00-0 191H71-7 452093-7 Sprocket
DUC254C 199063-2
Sprocket 3/8'' 3/8''LP
25cm/10'' A041 7 191G18-5 40 1.3mm/ .050'' 91PX / 492 CC 191H08-4 191H79-1 452093-7
nose bar LP
25cm/10'' ___ Solid carving bar --- 191G61-4 60 1.3mm/ .050'' 1/4'' 25AP / 466 MC 191G96-5 191H67-8 452093-7 Sprocket 1/4" 221528-7
25cm/10'' A041 7 191G15-1 40 CC 191H00-0 191H71-7 452093-7
DUC252 Sprocket 3/8''
DUC302 30cm/12'' A041 7 191G16-9 46 1.1mm/ .043'' 90PX / 291 CC 191H01-8 191H72-5 419288-5
nose bar LP
DUC352 35cm/14'' A041 7 191G17-7 52 CC 191H02-6 191H73-3 419288-5 Sprocket
221526-1
DUC252C 25cm/10'' A041 7 191G23-2 40 3/8'' 191H08-4 191H79-1 452093-7 3/8''LP
Sprocket LP
30cm/12'' A041 7 191G24-0 46 1.3mm/ .050'' 91PX / 492 CC 191H10-7 191H81-4 419288-5
nose bar
35cm/14'' A041 7 191G25-8 52 191H11-5 191H82-2 419288-5
Solid carving Sprocket
25cm/10'' ___ --- 191G61-4 60 1.3mm/ .050'' 1/4'' 25AP / 466 MC 191G96-5 191H67-8 452093-7 198259-2
bar 1/4"
25cm/10'' A041 7 191G14-3 40 191H00-0 191H71-7 452093-7
DUC256 30cm/12'' A041 Sprocket 7 191G15-1 46 3/8'' 191H01-8 191H72-5 419288-5
DUC306 1.1mm/ .043'' 90PX / 291 CC
35cm/14'' A041 nose bar 7 191G16-9 52 LP 191H02-6 191H73-3 419288-5
DUC356
40cm/16'' A041 7 191G17-7 56 191H03-4 191H74-1 419242-9 Sprocket
DUC406 199063-2
25cm/10'' A041 7 191G22-4 40 191H08-4 191H79-1 452093-7 3/8''LP
DUC256C
30cm/12'' A041 Sprocket 7 191G23-2 46 3/8'' 191H10-7 191H81-4 419228-5
1.3mm/ .050'' 91PX / 492 CC
35cm/14'' A041 nose bar 7 191G24-0 52 LP 191H11-5 191H82-2 419288-5
40cm/16'' A041 7 191G25-8 56 191H12-3 191H83-0 419242-9
Solid carving Sprocket
25cm/10'' ___ --- 191G61-4 60 1.3mm/ .050'' 1/4'' 25AP / 466 MC 191G96-5 191H67-8 452093-7 198259-2
bar 1/4"
DUC303, 30cm/12'' A041 7 191G15-1 46 191H01-8 191H72-5 419288-5
DUC353, Sprocket 3/8''
DUC400 35cm/14'' A041 7 191G16-9 52 1.1mm/ .043'' 90PX / 291 CC 191H02-6 191H73-3 419288-5
nose bar LP
DUC305 40cm/16'' A041 7 191G17-7 56 191H03-4 191H74-1 419242-9 Sprocket
199063-2
DUC355 30cm/12'' A041 7 191G23-2 46 191H10-7 191H81-4 419228-5 3/8''LP
DUC405 Sprocket 3/8''
35cm/14'' A041 7 191G24-0 52 1.3mm/ .050'' 91PX / 492 CC 191H11-5 191H82-2 419288-5
nose bar LP
40cm/16'' A041 7 191G25-8 56 191H12-3 191H83-0 419242-9
Electric Chain Saws
30cm/12'' A041 7 191G15-1 46 191H01-8 191H72-5 419288-5
Sprocket
35cm/14'' A041 7 191G16-9 52 1.1mm/ .043'' 3/8'' 90PX / 291 CC 191H02-6 191H73-3 419288-5
nose bar
UC3041A, 40cm/16'' A041 7 191G17-7 56 191H03-4 191H74-1 419242-9 Sprocket
UC3541A, 221526-1
30cm/12'' A041 7 191G23-2 46 191H10-7 191H81-4 419288-5 3/8''LP
UC4041A
Sprocket
35cm/14'' A041 7 191G24-0 52 1.3mm/ .050'' 3/8'' 91PX / 492 CC 191H11-5 191H82-2 419288-5
nose bar
40cm/16'' A041 7 191G25-8 56 191H12-3 191H83-0 419242-9
30cm/12'' A041 7 191G23-2 46 191H10-7 191H81-4 419288-5
UC3050A, 35cm/14'' A041 Sprocket 7 191G24-0 52 191H11-5 191H82-2 419288-5
UC3550A,
UC4050A, 40cm/16'' A041 nose bar 7 191G25-8 56 191H12-3 191H83-0 419242-9
UC4550A, 91PX / Sprocket
45cm/18'' A041 7 191G26-6 62 1.3mm/ .050'' 3/8'' CC 191H13-1 191H84-8 419242-9 221521-1
UC3051A, 492 3/8''LP
UC3551A, 30cm/12'' A041 High 9 191G32-1 45 191H09-2 191H80-6 419288-5
UC4051A, durability
35cm/14'' A041 9 191G33-9 52 191H11-5 191H82-2 419288-5
UC4551A sprocket
40cm/16'' A041 nose bar 9 191G34-7 56 191H12-3 191H83-0 419242-9

High
durability 91PX / Sprocket
5012B 30cm/12'' --- 9 191G63-0 45 1.3mm/ .050'' 3/8'' CC 191H09-2 191H80-6 410054-3 221514-8
sprocket 492 3/8''LP
nose bar
Tie Strap & Tie Strap with Rivets Chain oil
Tie Strap Tie Strap with item Size Part No.
Chain oil With Makita chain oil, chain oiling is 100ml 182229-1
Saw chain type pitch gauge (1pc) Rivets (1pc) formulated to adhere to the bar and chain
and to reduce wear. 195093-1
Part No. Part No. 1L
Adhesion additive helps keep sap and pitch 988002656
from clinging to the bar and chain.
25AP 466 1/4" 1.3mm/.050" 558466000 558466010 5L 988002658
(Not available in Austria)
55L 988002260
90PX 291 3/8"LP 1.1mm/.043" 510090030 510090010
200L 988002261
91PX, 91VXL 492, BIOTOP Chain oil With BIOTOP, chain oiling is safe for
3/8"LP 1.3mm/.050" 558092000 558092010 1L 980008610
196 environment. BIOTOP is purely vegetable-
based and readily biodegradable. It meets 5L 980008611
95VPX 484 .325" 1.3mm/.050" 510084040 510084020 the strict requirements of the RAL UZ48
environment mark for environmental 55L 980008217
20BPX, 20LPX
.325" 1.3mm/.050" 558486000 558486010 compatibility, lubrication, and aging
082 resistance. 200L 980008218
21BPX, 21LPX
.325" 1.5mm/.058" 558083000 558083010
086, 686
72V, 72DPX, 72LPX
496, 100, 101
3/8" 1.3mm/.050" 558496000 558496010 Chip receiver assembly set
73LPX, 73DPX Keeps branch or leaf debris from scattering around.
3/8" 1.5mm/.058" 558093000 558093010 • Attachable to either side of the blade
093, 099

Bar nut
Model No. Description Part No.
* Pole saw attachment (196315-2)
Model No. Part No. *DUM168 with thumb nut M4 x 2pcs 195279-7
DUH202, *DUM604, UH201D, *UM600D, One-touch installation 198402-3
EY2650H, EY401MP* XTM0000023
*UM603D / removal 198401-5(EU)
EA3110T MR00283041 DUH551, DUH651, UH4570, UH5570, One-touch installation
194681-1
EA3200S, EA3202S, EA3500S, EA3502S 264055-1 UH5580, UH6580, UH6850, UH7580 / removal
DUH483, DUH521, DUH523, UH522D, With binding head
EA4300F, EA5001P, EA5000P, EA6100P, EA6101P, EA7300P, 252145-2 195050-9
UH4261, UH4861, UH5261 screw M5X12 x 5pcs
EA7301P, EA7900P, EA7901P 923208004
DUH501, DUH502, DUH601, DUH602, One-touch
199151-5
DUH751, DUH752 installation/removal
DUH604S 191D33-1
Chain Saw Case (steel)
DUH754S 191D34-9
Model No. Part No.
EA3200S, EA3201S, EA3202S, EA3203S,
EA3500S, EA3501S, EA3502S, EA3503S, Toothed edge
821672-6
EA3600F, EA3601F, EA4300F, EA4301F, designed like saw teeth can catch
988959634 and prevent leaf or twig debris from
EA5000P, EA5001P, EA5600F, EA6100P,
EA6101P falling over the edge of chip receiver.

File and File holder Anti-slide ribs

For Model: on the bottom plate prevents
Chain saw leaf or twig debris from
*with gurip sliding and slipping out
of chip receiver.

File File and File holder

Saw chain type Size Model No. Description Part No.
Part No. Part No.
EH6000S, EH7500S without blade guard 451866-5
4mm *744003-1 -
25AP, 91PX, 91VXL, EH6000S with blade guard 452165-8
466, 492, 196 195089-2
4mm 953003090
953030010 EH7500S, EN7350S with blade guard 452166-6
90PX, 33SL, 34SL, 195923-6 With binding head
4.5mm 953003100 EH7500S, EN7350S without blade guard 196777-4
291 953030020 screw M5X12 x5pcs
20BPX, 21BPX, 21LPX, 95VPX, 197712-5 With binding head
4.8mm 953003070 EH7500S, EN7350S with blade guard 195321-4
082, 086, 686, 484 953030030 screw M5 x 12 x 5pcs.
72DPX, 72LPX, 72V, 73DPX,
73LPX, 5.5mm 953003040 95300000
496, 093, 099
Hook holder for extension cord

File handle, Flat file & Depth gauge jointer

For all saw chain

File handle Flat file Depth gauge jointer

Part No. Part No. Part No.

Type Description Part No.
953004010 953003060 953100090 A Arm band complete set 194679-8
B Cord holder complete set 194677-2
C Hook complete 158024-1
Shear blade & Blade cover for Hedge Trimmer Blade assembly Blade cover
Model No. Blade
Part No. Part No.
type
Blade type
AC Hedge Trimmer
A: Curving blade UH4261 C 140826-9 452683-6
Optimum blade shape for smooth cutting
UH4570 C 194660-9 450489-6
Sharp edge blades: Twigs are caught easily and held firmly
Upper blade...curving UH4861 C 140830-8 452684-4
downward UH5261 C 140827-7 452685-2
Lower blade...curving
UH5570 C 194663-3 450489-6
upward Caught smoothly
UH5580 C 194671-4 450489-6
UH6580 C 194673-0 450490-1
Contact point is
only both tips. Held and trimmed UH6570 C 194666-7 450490-1
UH7580 C 194675-6 450490-1
Petrol Hedge Trimmer
B: High grade blade *for blade without end cover
Upper/ Lower blade teeth with 3 **for blade with end cover
sharpened edges for clean cut. Blade teeth with *452328-6
3 sharpened EH5000W B 198049-3
**454279-9
edges
*452327-8
Well sharpened EH6000W B 196797-8
edges provide ** 454278-1
clean cut with *452326-0
the least branch EH7500W B 196799-4
**454277-3
damage.
EH6000S B 196803-9 451869-9
EH7500S B 196801-3 451868-1

C: Stain-free blade
Non-electrolyzed nickel plating End cover & Blade cover set
Evenly and strongly adhered Sap on the blade
surface coating that features (after 10 hour trimming of Boxwood)
high anti-abrasion surface for
long lasting coating. Model No. Part No.
EH5000W, EN4950H, EN401MP, EN410MP 196264-3
EH6000W, EN5950S 196262-7
Stain-free Our Current EH7500W, EN7350S 196261-9
Blade models

Blade assembly Blade cover

Model No. Blade
Blade guard
Part No. Part No.
type
Cordless Hedge Trimmer
*for China, Hong Kong, Korea, Malaysia, Philippines, Singapore, Taiwan & Vietnam. Model No. Part No.
**for Canada & Mexico
Petrol Hedge Trimmer
198409-9
UH201D C 451816-0
EU:198408-1 EH5000W, EH6000W, EH7500W, EN4951S, EN5950S 454672-7
DUH551 C 196687-5 450489-6
EH6000S, EH7500S EN7350S 346731-0
DUH651 C 196688-3 450490-1
DUH481, DUH483, UH482D C 195768-2 452684-4 Cordless Hedge Trimmer
DUH521, DUH523U, UH520D, UH522D C 195769-0 452685-2 DUH501, DUH502, DUH601, DUH602, DUH751, DUH752 458408-6
DUH501 A 199098-3 458413-3
458414-1
DUH601 A 199099-1
*459121-9 Shear blade & Blade cover for Grass Shear
DUH604S A 191D38-1 412355-5
458415-9
DUH751 A 199100-2
*459122-7
DUH502 B 199598-3 459120-1 Blade assembly Blade cover
Model No.
DUH602 B 199599-1 459121-9 Part No. Part No.
DUH752 B 199600-2 459122-7 DUM168, DUM604, UM600D, UM603D 195267-4 452055-5
DUH754S A 191D39-9 412356-3
DUH502 B **199236-7 **459120-1
DUH602 B **199101-0 **459121-9 Conversion from Hedge Trimmer to Grass Shear
DUH752 B **199102-8 **459122-7
Pole Hedge Trimmer (Cordless, Petrol, Multi-tool attachments㸧
*with Blade guard
**without Blade guard
DUN500W A 191C14-9 458413-3
DUN501W B 191E73-5 459120-1
DUN600L A 191C13-1 458414-1
EN420MP B 198195-2 457036-4
EN401MP, EN410MP, EN4950H, 197763-8
B 454279-9 *with grass receiver and clank cover.
EN4951SH EU:197768-8
*126280-1 454278-1 Blade assembly Blade cover Clank cover
EN5950S B Model No.
**126281-9 454278-1 Part No. Part No. Part No.
EN7350S B 126285-1 451868-1 *198411-2
UH201D 195267-4 452198-3
*198412-0(EU)
Conversion from Grass Shear to Hedge Trimmer Diamond file for shear blade

*With clank cover

Blade assembly Blade cover Chip receiver
Model No. Model No. Part No.
Part No. Part No. Part No.
DUP361, DUP362 794530-8
DUM604, UM600D, 198409-9 451816-0 198402-3
UM603D EU:198408-1 *195274-7 EU: 198401-5

451816-0
Battery powered pruning shear others accessory
195178-3
DUM168 195279-7
EU:195272-1 *195274-7

Base frame

*with grass Shear blade

Model No. Part No.
DUM168 326146-7+ 451810-2

Grass Receiver

*with grass Shear blade

Model No. Part No.
DUM604, UM600D, UM603D, *UH201D 457426-1

Model No. Item Part No.

Long attachment handle Standard Harness 161377-9
(Extension handle kit) Narrow Strap Harness for Summer 161603-6
Photo:198486-1 DUP361 Holster 161379-5
DUP362 Arm Band 166062-9
Cord Holder 154511-8
*with grass shear blade Connection Cord 661445-3
Model No. Part No.
198516-8
DUM604, UM600D, UM603D, *UH201D Wheelbarrow attachment
EU:198486-1
Carrier set

Pruning Shear blade

Shear blade (U)

Bucket set
Shear blade (L)
Do not re-use Stop Ring E-4 when reassembling.
Stop Ring E-4

*With Stop Ring E-4 (P/N:961011-9)

**Hex socket button head screw M3x6 P/N:266183-8 & Shoulder bolt M8
P/N:251573-8 are also necessary.
*Shear blade (U) Shear blade (L)
Model No. TYPE
Part No. Part No.
197748-4 197749-2
Standard
EU: 197588-0* EU: 197367-6
DUP361
DUP362 For hard branch 199168-8 199169-6
For thin branch 1993** 199171-9**

Branch catcher set

Model No. TYPE Part No.

199116-7
Carrier set(Pipe deck)
EU:199009-8
DCU180 198494-2
Bucket set
Model No. Part No. EU:199008-0
*DUP361, *DUP362 199311-9 Auxiliary wheel attachment set 191A01-6
Rotary lawn mower blade Vacuum attachment

Model No. Size(mm) Part No.

Cordless Lawn Mower
DLM380 380 196863-1 Model No. Description Part No.
DLM382 380 191D41-2
DUB363 Vacuum kit set 191E19-1
197761-2
DLM431 430 197234-5
EU:197762-0 BHX2500, BHX2501 Vacuum set
EU:197235-3
DLM432 430 191D43-8
DML460 460 199367-2
DLM462 460 199367B2 Pipe, End pipe, Flat nozzle & others accessory
DLM530, DLM531, DLM532, DLM533 530 191D52-7
Electric Lawn Mower Extension Nozzle

ELM3320 330 YA00000745

Adapter pipe
ELM3720 370 YA00000746
ELM4120 410 YA00000747
Shoulder belt
ELM4121 410 YA00000738
ELM4620 460 YA00000741
Pipe
ELM4621 460 YA00000741
Petrol Lawn Mower
End nozzle
PLM4120N 410 671001433
PLM4620N2, PLM4621N2, PLM4622N2, PLM4626N, Flat nozzle
PLM4627N, PLM4628N, PLM4630N2, PLM4631N2, 460 DA00001274
PLM4632N
Hip belt
PLM5130N 510 DA00001276
PLM5113N2 510 DA00000973
Sternum strap
PLM5600N2 560 DA00001275
Petrol Mulching Mower Model No. Items Description Part No.
PLM4817, PLM4818, PLM4819 480 DA00000532
DUB184, Extension Nozzle 㻌 197888-8
PLM5120N2, PLM5121N2 510 DA00000944 DUB362,
DUB363 Flat nozzle 㻌 197889-6

DUB184 Adapter pipe 80-72 set 㻌 191B21-6

Rotary lawn mower swing back blade
DUB184,
Swing back blade set Replacement blade set Shoulder belt 㻌 166094-6
DUB362
Model No.
Size(mm) Part No. Par pkg. Part No. Long pipe 90 set - 197723-0
DLM530, DLM531,
530 191D48-8 4 191D48-8 Short pipe 90 set - 196912-4
DLM532
EB5300TH, End nozzle 90-60 Blowing velocity-oriented 454896-5

Scarifyer drum EB5300WH, End nozzle 90-62 - 198034-6

Model No.  Part No. EB7660TH, End nozzle 90-68 - 197722-2

Scarifying 652024718 EB7660WH End nozzle 90-70 Blowing volume-oriented 455128-3

UM3200
Lawn Raking 652024719 Flat nozzle - 196911-6
Scarifying 652024746 196733-4
Sternum strap -
UM3600 Combination 652024750 199237-5(EU)

Lawn Raking 652024749 EB5300TH, 198645-7 

Hip belt -
EB5300WH 199238-3(EU)

EB7660TH,
Hip belt - 196956-4
Hose set (Delivery hoses (8m, 27ft) and two way EB7660WH
adjustable nozzle set) Nozzle 0.5 For ULV (Ultra-Low-Volume) 326378-6
For Model:
EW1050, EW1060 Nozzle 0.8 For ULV (Ultra-Low-Volume) 326214-6
*Standard equipment Nozzle 0.7 For ULV (Ultra-Low-Volume) 326212-0
Part No. Bent pipe 630 - 453507-9

B-10671 Straight pipe 630 - 453699-4

Straight pipe 380 - 453700-5
PM7650H, End pipe 200 - 455631-4
Trolley kit PM7651H
End pipe 450 - 455632-2
Flat pipe - 455634-8
Top adapter - 453986-1
Deflector set - 198248-7
O ring set - 197070-9
197055-5
Hip belt set -
Model No. Part No. 199240-6(EU)
196733-4
Sternum strap -
EK7300, EK7301 DT2010 199237-5(EU)

EK8110 DT2020 BHX2500, Pipe - 451752-0

BHX2501 End Pipe

EK7650H, EK7651H DT4000 - 451753-8
(Flat nozzle)
Nozzle assembly Power washer accessories for DHW080, HW1200, &
A:Standard equipment
HW1300
Shape Model No. Part No.
Trigger gun set
DHW080
Model No. Size(mm) Type Part No. HW1200 197842-2
220 A 132025-7 HW1300
DUB182
430 - 134182-7 Variable nozzle set
DHW080
HW1200 197822-8
HW1300
Bending long nozzle set
* long nozzle Variospray lance set
DHW080
HW1200 197876-5
HW1300

Cyclone jet nozzle set

DHW080
Model No. Part No.
HW1200 197824-4
DUB183 TP00000199 HW1300

Cyclone guard set

DHW080
Dust Bag HW1200 197864-2
HW1300

Under body spray lance set DHW080

HW1200*
Model No. Part No. 197859-5
HW1300*
DUB182 122814-8 (*for 110-127V)
HW1200**
HW1300** 198909-9
(**for 220V-240V)
Flexible hose set Extension pipe set
(Total length: 95cm) (0.9m / 1.3m / 1.7m) DHW080
HW1200 197870-7
HW1300
Model No. Part No.

DUB182 191750-9 Rotating brush set

DHW080
HW1200 197831-7
HW1300
Sprayer accessories for EF1550RH & EVH2000
Wash brush set
Model Features/ DHW080
Shape Part No.
No. Recommended use HW1200 197828-6
Wide angle herbicide HW1300
for spraying herbicides; also
nozzle
ideal for watering plants 6908031000
Foam nozzle set
or spraying soil conditioner DHW080
Herbicide nozzle HW1200 197886-2
Hard to become mist HW1300
preventing diffusion of 6958011000
medicine. Pipe cleaning hose
DHW080 10m 197837-5
Y-shaped double HW1200
for general pesticide
nozzle HW1300 15m 197840-6
applications using insecticides, 6958025000
fungicides, etc. High pressure extension hose 5m 197845-6
DHW080
Long two head nozzle HW1200 8m 197847-2
EF1550RH Wide sprayibg with wide angle
6949001000 HW1300
EVH2000 outlet. 10m 197850-3
Twist prevention joint set
U-shaped double DHW080
nozzle Wide sprayibg with wide angle HW1200 197867-6
6958018000
outlet. HW1300

Triple concentric Self-suction hose set

nozzle DHW080
Spraying in the form of circular. 6909500100 HW1200 197873-1
HW1300
Quadruple concentric
nozzle Accessory joint set DHW080
Spraying in the form of circular. 6919500000 HW1200 197853-7
HW1300
Compact nozzle Absorption connector set DHW080
Convenient for spraying in the
green house by compact 6939025000 HW1200 197881-2
nozzle. HW1300
One touch joint set DHW080
Jet nozzle 2
Diffusion or straight is HW1200 197883-8
EVH2000 6939024000 HW1300
selectable with one tach
Cleaner pin set
Super jet nozzle DHW080
HW1200 197879-9
Diffusion or straight is
6939028000 HW1300
selectable.
Gasoline filter, Spark plug & Air cleaner element
Gasoline filter
163518-3
Air cleaner element
443171-4
PRE FILTER (Foam)
***D010114020:Filter Repair kit, (Felt element 5pics)
Gasoline filter Spark plug Air cleaner element
Model No.
Part No. Type Part No. Type Part No.
PRE FILTER (Foam) 443141-3
BHX2500, BHX2501 163447-0 NGK CMR6A 168401-9
AIR FILTER (Non-woven fabric) 443140-5
EA3110T MR00286749 NGK BPMR8Y 649500-1  MR00285584
EA3200S, EA3201S, EA3202S, EA3203S, EA3500S,
163447-0 NGK CMR6A 168401-9  423414-0
EA3501S, EA3502S, EA3503S
EA3600F, EA3601F 163518-3 NGK BPMR8Y 649500-1 AIR FILTER (Nylon mesh) 126370-0
AIR FILTER (Nylon mesh) 123452-9
EA4300F, EA4301F 163447-0 NGK CMR7A-5 168599-2
AIR FILTER (Fleece) 123453-7
AIR FILTER (Nylon mesh) 181173090
EA5000P, EA5001P D010114200 NGK BPMR7A 168648-5 AIR FILTER (Fine Nylon mesh) 181173240
AIR FILTER (Fleece) 181173190
EA5600F D010114200 NGK BPMR7A 168648-5 AIR FILTER (Paper) 131173010
EA6100P, EA6101P D010114200 NGK BPMR7A 168648-5 AIR FILTER (Paper) 130173010
AIR FILTER (Nylon mesh) 38173011
AIR FILTER (Fleece) 38173101
EA7300P, EA7301P, EA7900P, EA7901P D010114200 NGK BPMR7A 168648-5 HD (HEAVY DUTY) FILTER (convert set) 957173400
AIR-FILTER CARTRIDGE for HD FILTER 38173310
PRE-FILTER for HD FILTER 38173350
198284-3
EB5300TH/WH 163532-9 NGK CMR6H 168652-4 AIR FILTER (Paper)
EU:198292-4
EB7650TH/WH 163532-9 NGK CMR6A 168401-9 AIR FILTER (Paper) 412145-6
EB7660TH/WH 163532-9 NGK CMR6H 168652-4 AIR FILTER (Fleece) 424809-0
PRE FILTER (Foam) 443141-3
EBH252U, EBH253U, EBH341L/U 163447-0 NGK CMR4A 168534-0
AIR FILTER (Non-woven fabric) 443140-5
PRE FILTER (Foam) 443141-3
EBH340R/U EBH341R 163447-0 NGK CMR6A 168401-9
AIR FILTER (Non-woven fabric) 443140-5
EE2650H, EM2510LH, EM2511LH PRE FILTER (Foam) 443171-4
163518-3 NGK CMR4A 168534-0
EM2550UH AIR FILTER (Non-woven fabric) 443169-1
EF1550RH 163447-0 NGK CMR4A 168534-0 AIR FILTER (Foam) 443141-3
PRE FILTER (Foam) 443157-8
EH5000W, EH6000S/W, EH7500S/W 163518-3 NGK CMR6A 168401-9
AIR FILTER (Non-woven fabric) 443158-6
163499-1 AIR FILTER (Paper) 424789-0
EK6100, EK6101 NGK BPMR7A 168648-5
D010114020*** AIR FILTER (Nylon mesh) 424790-5
PRE FILTER (Foam) 424700-2
163499-1
EK7300, EK7301, EK8100 NGK BPMR7A 168648-5 AIR FILTER (Paper) 424701-0
D010114020***
AIR FILTER (Nylon mesh) 424705-2
Air cleaner element set (with 166106-5 DUST BAG,
EK7650H, EK7651H 163447-0 NGK CMR6H 168652-4 195599-9
195945-6 PRE FILTER SET x5, 442165-6 AIR FILTER)
163499-1
EK8110 NGK BPMR7A 168648-5  399173010
D010114020***
EM2500L, EM2500U DA00000119 NGK BPMR7A 168648-5  A00000105
EM2510LH, EM2511LH PRE FILTER (Foam) 443141-3
163447-0 NGK CMR4A 168534-0
EM2550UH, ER2550LH AIR FILTER (Non-woven fabric) 443140-5
EM2600L/U, ER2600L DA00000119 NGK BPMR7A 168648-5  A00000423
EM3400L/U 163447-0 NGK BPMR7A 168648-5 AIR FILTER (Paper) 443194-2
PRE FILTER (Foam㸧 443196-8
EM4350LH/RH/UH, EM4351UH 163518-3 NGK CMR6A 168401-9
AIR FILTER (Paper) 442181-8
EN4950H, EN4951SH, EN5950S PRE FILTER (Foam) 443171-4
163518-3 NGK CMR4A 168534-0
EN7350S, ER2650LH, EX2650LH, EY2650H AIR FILTER (Non-woven fabric) 443169-1
EVH2000 163447-0 NGK CMR6A 168401-9 AIR FILTER (Foam) 5923503200
PRE FILTER (Foam) 443141-3
EW1050H, EW1060H 163447-0 NGK CMR6A 168401-9
AIR FILTER (Non-woven fabric) 443140-5
PRE FILTER (Foam) 443171-4
PE3450H 163447-0 NGK CMR6A 168401-9
AIR FILTER (Non-woven fabric) 443169-1
PM7650H, PM7651H 163532-9 NGK CMR6A 168401-9 AIR FILTER (Paper) 442181-8

NGK BPMR7A 168648-5 PRE FILTER (Foam) Square 443162-5

RBC411U, RBC412U 161446-6
/ NGK BPM7A / 168588-7 AIR FILTER (Foam) Round 443161-7
NGK BPMR7A 168648-5
RBC413U, RBC414U 163447-0 AIR FILTER (Foam) 443180-3
/ NGK BPM7A / 168588-7
Spark plug High-performance two-stroke engine oil 50:1
*with measuring cup

Size Part No.

195957-9
100ml
980008606
Wrench 1L 980008607
Type Part No.
size (mm) 1L* 980008612
NGK CMR4A 16 168534-0
5L 980008618
NGK CMR6A 16 168401-9
55L 980008150
NGK CMR6H 16 168652-4
200 980008151
NGK CMR7A-5 16 168599-2
NGK BPMR7A 19 168648-5
NGK BPM7A 19 168588-7 Fuel mixture
NGK BPMR8Y 19 649500-1
NGK BMR7A 19 168662-1

Size Part No.

4-stroke engine oil
1L 456236-3
Size Part No. Description
100ml 191A18-9 without master carton
100ml x10 191A14-7 with master carton Safety goggles
198279-6 Photo:
140ml with master carton 195246-2
EU:198290-8
195816-7 with master carton
220ml
195532-1 without master carton
600ml 980308620 
Part No.

192219-6
Grease vessel set
195246-2

Description Size  Part No.

For Pole hedge trimmer and Multi-tool
attachments (Cultivator, Power brush and 80ml  197439-7
Power sweep) (GREASE NO.0)
For string trimmer, Brushcutter and Hedge
80ml  199450-5
trimmer (GREASE NO.2)
For string trimmer, Brushcutter and Hedge
80ml For RUSSIA 199456-3
trimmer (GREASE NO.2)
ACCESSORIES
Miscellaneous
 Wrenches 207

Adjustable wrench Wide excursion jaw allows each tool to work

with even more fastener sizes.

Open end U-shaped opening grips with two opposite

face of the bolts and nuts. Due to the
opening, it can easily access to bolts and
nut.

Flare end Narrow opening which is wide enough to fit

over the tube. Large contact surface with
fastener reduces rounding. Suitable for
Spanner
aluminum, copper and brass hexagonal
fitings on oil pipe.

Box end Enclosed opening grips snugly fits the faces

of the bolts and nuts. Force can be applied
to bolts or nuts with decreased chance of
damaging.

Ratcheting wrench The ratcheting mechanism allows fastener

to be tightened or loosened without
disconnecting the tool from it. It makes the
works more rapidly.

Hex key Used for tightening or loosening cap screw

wrench and bolts with hexagonal sockets attached
with ball-end to their heads.
A ball end allows the tool to be used at an
angle off-axis to screw and bolt. It means it
can used at tightening area.
Miscellaneous
208 Accessories
Tape measure
(Wood/Metal)

Makita tape measure is highly durable and convenient. When the scales are
Drilling

blurred or hook is lost, that would be the end of it's life. This measure is for
professional which has a special coated tape, hook protector and damper
which absorbs shocks leads to great durability.
(Masonry)
Drilling
Fastening
Screw Bit Sets
Drill and

Feature
1. Special Coating 3. Convenience
* ”DURA COAT” makes 5 times more durable * 2-sided print
* ”SILICA COAT” makes easier note * Hook with magnet
Cutting

* “Matte finish” makes easier to read scales

* Standout
Reciprosawing
Jigsaw /

2. High durability of Hook

* Installed damper absorbs the shock on the hook
* Hook protector reduces the shock on the hook
* Tightly fixed hook with “4rivets+protector” Printed size
Brushing

Protector mm cm Inch cm/Inch

4Rivets
Bonded Abrasive

New!! A safety cord prevents measure from falling which prevents an

accident such as dropping a measure from high work sight. Actually,
Tape measure with holder & safety cord there was an fatal accident caused by the drop of measure.
Coated Abrasive
Multi Tool
Diamond
Routering
Planing /

Measure is attachable with a single touch. Press down the

yellow lever and take off the measure.
OPE
Miscellaneous
Tape measure Go thru Screw driver

Size Length (mm) Part No.

Size Length Width Part No. PH1 75 B-66064
PH2 100 B-66070
cm 3.5m 16mm B-57130
PH3 150 B-66086
PZ1 75 B-66092
PZ2 100 B-66101
PZ3 150 B-66117

Size Length Width Part No.

Shock driver
5.5m 25mm B-68507
mm
7.5m 25mm B-68513
5.5m 25mm B-57146
cm
7.5m 25mm B-57152
Size Length (mm) Part No.
18ft 1'' B-57180
inch PH2 125 B-42438
25ft 1'' B-57196
PH3 150 B-42444
5.5m/18ft 25mm/1'' B-57211
cm/inch PZ2 125 B-42450
7.5m/25ft 25mm/1'' B-57227
PZ3 150 B-42466

Ratchet screwdriver
With screw bit 25mm (PH2)x1pcs.

Size Length Width Part No.

Part No.
mm 10m 25mm B-68529
D-58833
cm 10m 25mm B-57168
inch 33ft 1'' B-57205
40 pcs. Ratcheting Tap & die set
Small/ Medium Ratcheting T wrench, Small Tap adapter, Medium Tap adapter
Tape measure with Medium Hex die adapter, Screw driver, Pitch gauge,
NC Hex die: 3mmx0.50, 3mmx0.60, 4mmx0.70, 4mmx0.75, 5mmx0.80, 5mmx0.90,
holder & safety cord 6mmx1.00, 7mmx1.00, 8mmx1.25, 9mmx1.25, 10mmx1.50, 11mmx1.50, 12mmx1.75
NC Plug Tap: 8mmx1.25, 9mmx1.25, 10mmx1.50, 11mmx1.50, 12mmx1.25
NC Taper Tap: 3mmx0.50, 3mmx0.60, 4mmx0.70,
4mmx0.75, 5mmx0.80, 5mmx0.90, 6mmx1.00, 7mmx1.00
NF Hex Die: 9mmx1.00, 10mmx1.5, 12mmx1.50
NF Plug Tap: 9mmx1.00, 10mmx1.25, 12mmx1.50
BSP Hex Die: 1/8-28, BSP Tap 1/8-28
Size Length Width Part No.
cm 7.5m 25mm B-57174
cm/inch 7.5m/25ft 25mm/1'' B-68351

Part No.
Screw driver B-65838

Ratcheting tap & die handle

Size Length (mm) Part No.
PH1 100 B-65903 Part No.
PH2 100 B-65919
B-65866
PH3 150 B-65931
PZ1 80 B-65947
PZ2 100 B-65953 Tap adapter
PZ3 150 B-65969
T10 100 B-65975 Part No.
T15 100 B-65981 B-65872
T20 100 B-65997
T25 100 B-66008
Twist lock die adapter
T30 100 B-66014
SL4.0 100 B-66020
SL5.5 100 B-66036
SL6.5 125 B-66042 Part No.
SL8 150 B-66058 B-65888
Ratchet & socket set Pass thru socket

Size Part No. Size Part No.

10mm B-65648 15mm B-65698
11mm B-65654 16mm B-65707
12mm B-65660 17mm B-65713

Drive Contents Sum Part No. 13mm B-65676 18mm B-65729

84T Ratchet, bit adapter,Slide T bar, 14mm B-65682 19mm B-65735
Socket: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,
1/4'' SQ 13mm, Deep socket: 5, 6, 7, 8, 9, 10, 11, 34 B-65567
12, 13mm, Extension bar: 3'',6'', T bit: T8,
T10, T15, T20, T25, T27, T30, T40x25mm
Retractable utility knife
84T Ratchet, Adapter to 1/2'' SQ,
Socket: 8, 9, 10, 11, 12, 13, 14, 15, 16,
3/8'' SQ 23 B-65573
17, 18, 19, 20mm, Middle socket: 8, 10,
13, 16, 17, 19mm, Extension bar: 3'', 6'' Part No.
84T Ratchet, Adapter to 3/8'' SQ,
B-65785
Universal joint, Socket: 10, 11, 12, 13,
1/2'' SQ 23 B-65589
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
27, 30, 32mm, Extension bar: 5'', 10''
Quick change Folding utility
u knife
Pass thru socket set
Part No.
B-65501

Spare blade 10 pcs. set

Part No.
B-65517

Contents Sum Part No.

Pass thru Socket : 10, 11, 12, 13, 14, 15, 16, 17, 18, Snap-off knife
19mm, Socket adapter: 1/4'', 3/8'',
14 B-65595
Pass thru Extension bar: 75mm, Ratchet handle
(Pass thru handle straight)
Pass thru Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18,
19mm, Pass thru Socket: 3/8'', 7/16'', 1/2'', 9/16'', Part No.
5/8'', 11/16'', 3/4'', Socket adapter: 1/4'', 3/8'', Pass 21 B-65604 D-58855
thru Extension bar: 75mm, Ratchet handle (Pass
thru handle straight)

Pass thru extension bar Part No.

Part No. D-65713

B-65632
Box joint water pump pliers
Socket adapter
Size Part No.
1/4'' B-65844
3/8'' B-65850
Overall length MAX Jaw size Part No.
7''(180mm) 37mm B-65741
Locking flex pass thru handle
9.5''(240mm) 49mm B-65757
12''(300mm) 68mm B-65763

Part No.
B-65626 Water pump pliers

Pass thru handle straight

Overall length MAX Jaw size Part No.

Part No. 10''(250mm) 51mm B-65486
B-65610 12''(300mm) 76mm B-65492
Smooth face claw hammer Double box wrench 5pcs. set

Overall length Size Part No. Size Part No.

250mm 20OZ. (0.57kg) B-65779 8x9, 10x11, 12x13, 14x15, 18x19mm B-65551

Aviation snip Flare nut wrench 5pcs. set

Cutting capacity Size Part No.

Description Part No.
Cold-rolled steel Stainless steel 9x11, 10x12, 13x14, 15x17, 16x18mm B-65545
Cuts straight B-65791
Cuts left B-65800
18ga 23ga Double ratchet wrench 8pcs. set
Cuts right (1.22mm) (0.61mm) B-65816
Bull dog B-65822

Adjustable wrench

Size Part No.

Length Capacity Part No. 8, 10, 12, 13, 14, 15, 17, 19mm B-65523

6''(150mm) 29mm B-65414

8''(200mm) 36mm B-65420 Hex key wrench 9pcs. set

10''(250mm) 38mm B-65436

12''(300mm) 43mm B-65442

11pcs. Pass thru adjustable wrench set Size Part No.

1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm B-65894

Guide rail bag

Description Size Part No.

Adjustable wrench 200mm
3/8''(10mm), 7/16''(11mm),
15/32''(12mm), 1/2''(13mm), B-65458
3/8'' socket 9/16''(14mm), 19/32''(15mm),
5/8''(16mm), 11/16''(17mm), Size Part No.
23/32''(18mm), 3/4''(19mm) 1,000mm B-66905
1,400/1,500mm B-57613
Locking adjustable wrench
LED Pen Light (without battery)
Battery type: AA

Size MAX Jaw size Part No.

10''(250mm) 35mm B-65470 Part No.

D-58752

Combination wrench 9pcs. set

Size Part No.

8, 10, 12, 13, 14, 15, 16, 17, 18mm B-65539
Nails, Staples and Screws Wire coil Nails (Roofing Nail)
(7,200 pcs/box)
Wire coil Nails (Flat Type)
For Model:
AN454
Dia Length Shank Nails/ carton Part No.
22mm (7/8'') Smooth 7,200 F-30762
25mm (1'') Smooth 7,200 F-30775
3.1mm
32mm (1-1/4'') Smooth 7,200 F-30788
Dia Length Shank Nails/ carton Part No. (0.120'')
38mm (1-1/2'') Smooth 7,200 F-30791
For Model:
45mm (1-3/4'') Smooth 7,200 F-30807
AN560, AN611, AN621, AN635H, AN760, AN901, AN902, AN935H, AN953H
45mm
Smooth 10,800 F-30810
(1-3/4'')
2.5mm Plastic strip nail full round-head
(0.099'') 50mm Screw Chisel 10,800 F-30865
(2'') Smooth 10,800 F-31243
For Model:
For Model: AN924
AN611, AN621, AN635H, AN760, AN901, AN902, AN935H, AN953H, AN960, AN961 Dia Length Shank Finish Nails/ carton Part No.
Screw Chisel 8,100 F-30878 Smooth Bright 6,000 F-30180
57mm
50mm
(2-1/4'') Smooth 8,100 F-31256 Ring Bright 6,000 F-30193
2.5mm (2'')
(0.099'') 65mm Smooth 8,100 F-30900 Ring Galvanized 6,000 F-30209
(2-1/2'') Screw Chisel 8,100 F-31269 Smooth Bright 5,000 F-30212
For Model: 2.9mm Ring Bright 5,000 F-30225
(0.113'') 60mm
AN560, AN611, AN621, AN635H, AN760, AN901, AN902, AN935H, AN953H Screw Bright 5,000 F-30238
(2-3/8'')
2.8mm (0.110'') Smooth 9,000 F-30823 Smooth Galvanized 5,000 F-30241
2.9mm (0.113'') 50mm (2'') Smooth 9,000 F-30849 Ring Galvanized 5,000 F-30254
2.9mm (0.113'') Screw Chisel 9,000 F-30971 65mm Ring Bright 5,000 F-30267
For Model: (2-1/2'') Smooth Galvanized 5,000 F-30270
AN611, AN621, AN635H, AN760, AN901, AN902, AN935H, AN953H, AN960, AN961 Smooth Bright 4,000 F-30283
75mm
57mm (2-1/4'') Screw Chisel 6,750 F-31272 3.1mm Ring Galvanized 4,000 F-30296
2.9mm (3'')
(0.113'') (0.120'') Smooth Galvanized 4,000 F-31108
Screw Chisel 6,750 F-30881
65mm 83mm (3-14'') Smooth Bright 4,000 F-30302
3.1mm (0.120'') Smooth 6,075 F-30836
(2-1/2'')
3.3mm (0.131'') Smooth 4,050 F-30852 65mm (2-1/2'') Smooth Bright 4,000 F-31124
For Model: Smooth Bright 4,000 F-30315
75mm (3'')
AN760, AN901, AN902, AN935H, AN953H, AN960, AN961 Smooth Galvanized 4,000 F-30328
3.3mm
71mm Smooth Bright 4,000 F-30331
2.9mm (0.113'') Screw Chisel 6,750 F-31285 (0.131'') 83mm (3-14'')
(2-13/16'') Smooth Galvanized 4,000 F-30344
3.1mm (0.120'') 75mm (3'') Smooth 4,050 F-31298 Smooth Bright 3,000 F-30357
3.2mm (0.120'') 75mm (3'') Screw Chisel 4,050 F-31320 90mm (3-1/2'')
Smooth Galvanized 3,000 F-30360
For Model: Smooth Bright 4,000 F-31603
AN901, AN902, AN935H, AN953H, AN960, AN961 75mm (3'') Screw Bright 4,000 F-31629
3.4mm (0.135'') 75mm (3'') Smooth 3,600 F-31359 Smooth Galvanized 4,000 F-31568
3.4mm
For Model:
(0.135'') Smooth Bright 4,000 F-31616
AN901, AN902, AN935H, AN953H, AN960, AN961
Dia Length Shank Nails/ carton Part No. 90mm (3-1/2'') Screw Bright 4,000 F-31632

Smooth 4,050 F-31304 Smooth Galvanized 4,000 F-31571

85mm
3.1mm (3-1/4'') 3.8mm 75mm (3'') Screw Galvanized 4,000 F-31584
Screw Chisel 4,050 F-31333
(0.120'') (0.148'')
Smooth 4,050 F-31317 90mm (3-1/2'') Screw Galvanized 3000 F-31597
90mm
3.2mm (0.120'') Screw Chisel 4,050 F-31346
(3-1/2'')
3.8mm (0.146'') Smooth 2,700 F-31362 Paper tape nail clipped-head

Wire coil Nails (Conical Type) For Model:

AN943
Nails/
Dia Length Shank Finish Part No.
carton
For Model: 2.9mm 60mm
AN560, AN611, AN635H Smooth Bright 3,000 F-30566
(0.113'') (2-3/8'')
Nails/ Smooth Bright 3,000 F-30579
Dia Length Shank Part No.
carton 75mm
Smooth Galvanized 3,000 F-30582
32mm (1-1/4'') smooth 21,600 F-32766 3.1mm (3'')
2.1mm (0.120'') Ring Galvanized 3,000 F-30595
38mm smooth 18,000 F-32779 83mm
(0.083'') Smooth Bright 3,000 F-30601
(1-1/2'') screw 18,000 F-32801 (3-1/4'')
75mm Smooth Bright 3,000 F-30614
For Model:
(3'') Smooth Galvanized 3,000 F-30627
AN560, AN611, AN621, AN635H, AN760, AN901, AN935H
3.3mm 83mm Smooth Bright 3,000 F-30630
45mm smooth 18,000 F-32782 (0.131'') (3-1/4'') Smooth Galvanized 3,000 F-30643
(1-3/4'') screw 18,000 F-32814
2.1mm 90mm
(0.083'') Smooth Bright 3,000 F-30656
50mm smooth 14,400 F-32795 (3-1/2'')
(2'') 3.3mm 90mm
screw 14,400 F-32827 Smooth Galvanized 3,000 F-31645
(0.131'') (3-1/2'')
Pin nail Brad Nail

Model No. Type Length Part No.

15mm (5/8'') F-31867
AF506, AF552H 20mm (3/4'') F-31870
DBN500 25mm (1'') F-31883
30mm (1-3/16'') F-31896
Model No. Type Length Part No.
18Ga 32mm (1-1/4'') F-31902
AF201Z, AF502HP, 18mm (11/16'') F-31825
AF353, DPT351, Brad Nail 35mm (1-3/8'') F-31915
DPT353, PT354D 25mm (1'') F-31838 (5,000 pcs/box) 38mm (1-1/2'') F-31928
AF502HP, AF353, 23Ga(φ0.6) AF506, DBN500
30mm (1-3/16'') F-31841 40mm (1-9/16'') F-31931
DPT351, DPT353, Pin Nail
PT354D (10,000 pcs/box) 35mm (1-3/8'') F-31854 45mm (1-3/4'') F-31944
45mm (1-3/4'') F-32920 50mm (2'') F-31957
AF502HP AF552H 55mm (2-3/16'') F-32946
50mm (2'') F-32933
AF201Z, AF502HP, 18mm (11/16'') F-32142
DPT351, DPT353, 23Ga(φ0.6)
PT354D Stainless 25mm (1'') F-32155 Staple
Pin Nail 30mm (1-3/16'') F-32168
AF502HP, DPT351,
(10,000 pcs/box)
DPT353, PT354D 35mm (1-3/8'') F-32171
Model No. Type Length Part No.
DST112 10mm(3/8")
Finish Nail ST113D Crown Staple 7mm F-81518
(5,040 pcs/box)
*Japanese
package 10mm F-81521

DST221 10mm (3/8") F-32647

10mm(3/8")
Crown Staple 13mm (17/32”) F-32650
(5,040 pcs/box) 16mm (5/8") F-32663
Model No. Type Length Part No.
19mm (3/4") F-32676
15mm (5/8'') F-33890
22mm (7/8") F-32689
19mm (3/4") F-33906
AT1150A 25mm (1'') F-32078
22mm (7/8") F-33919
7/16" 28mm (1-1/8'') F-32081
25mm (1'') F-33922 Medium Crown 32mm (1-1/4'') F-32094
30mm (1-3/16'') F-33935 Staple
35mm (1-3/8'') F-32100
16Ga
32mm (1-1/4'') F-33948 (10,000 40mm (1-9/16'') F-32113
16 ga Finish Nail
(2,000 pcs/box) 35mm (1-3/8'') F-33951 pcs/box) 45mm (3/4'') F-32126
38mm (1-1/2'') F-33964 51mm (2'') F-32139
AT2550A 22mm (7/8") F-32197
40mm (1-9/16'') F-33977 1"
AF601 DBN600 25mm (1'') F-32023
45mm (1-3/4'') F-33980 Wide Crown
Staple 16Ga 32mm (1-1/4'') F-32036
50mm (2'') F-33993 (10,000 38mm (1-1/2'') F-32049
57mm (1-1/4'') F-34001 pcs/box)
45mm (1-3/4'') F-32052
60mm (2-3/8'') F-34014
51mm (2'') F-32065
64mm (2-1/2'') F-34027
16 ga Finish Nail 25mm(1'') F-34030
Stainless Concrete pin
38mm (1-1/2'') F-34043
(2,000 pcs/box) Includes one Fuell cell / box.
50mm (2'') F-34056 Box : 10pins/strip x 100 = 1,000pins
for Europe
64mm (2-1/2'') F-34069
32mm (1-1/4'') F-31960
15Ga For Model:
Finish Nail 38mm (1-1/2'') F-31973 GN420C
34deg Descroption Dia. (mm) Length (mm) Part No.
45mm (1-3/4'') F-31986
AF635 (4,000 pcs/box)
50mm (2'') F-31999 15 196285-5
17 196286-3
57mm (1-1/4'') F-32007
Premium pin 3.1 22 196287-1
64mm (2-1/2'') F-32010
27 196288-9
32 196289-7
20 196290-2
25 196291-0
Standard pin 2.6 30 196292-8
35 196293-6
40 196294-4
Concrete pin Coil tape collated screws
1,000 pcs/box (2,000 pcs/box)
For Model:
AN250HC

Dia. (mm) Length (mm) Part No. Model No. Application Length Dia Part No.

19 F-33562 25mm (1'') F-34072

Drywall to metal stad
3.5mm
2.5 22 F-33575 (Plasterboard to metal 28mm (1-1/8'') F-34085
(0.139'')
stad)
25 F-33588 41mm (1-5/8'') F-34098
AR410HR
3 19 F-33591 AR411HR 25mm (1'') F-34104
6841R Drywall to wood 28mm (1-1/8'') 3.8mm F-34117
(Plasterboard to
32mm (1-1/4'') (0.146'') F-34120
Clipped Head Nails wood)
For Model: 41mm (1-5/8'') F-34133
GN900
Length Shank Fuel cell Nails/ Part
(mm) Dia (mm) /box box No.
Reber binding attachment set with 1/4'' Hex. shank
Ring Stainless
51 2.9 1 1,100 194799-8
63 2.9 1 1,100 194800-9
80 3.1 1 1,100 194801-7 Part No.
Ring Bright 194731-2
51 2.9 3 3,300 194764-7
51 2.9 1 1,100 194780-9
63 2.9 3 3,300 194767-1 Hex wrench
63 2.9 1 1,100 194784-1
75 3.1 2 2,200 194772-8
Ring Galv
51 2.9 3 3,300 194765-5
51 2.9 1 1,100 194782-5
Model No. Size Part No.
57 2.9 3 3,300 194766-3
63 2.9 3 3,300 194768-9 JN1601, 2012NB 2.5mm 783208-8
JN3200, JS1600, JS1660, JS1670, 4331D,
63 2.9 1 1,100 194785-9
4333D, 4334D, 4300BA, 4300BV, 4326/M, 3mm 783201-2
63 3.1 2 2,200 194770-2 4327/M,4328, 4329, JV0600
63 3.1 1 1,100 194788-3 JS3200, 4350T/CT/FCT, 4351T/CT/FCT,
4mm 783202-0
BJV140, BJV180, 1806B, N1923B, 1911B
75 2.9 1 1,100 194792-2
KP312/S 4mm 783219-3
75 3.1 2 2,200 194773-6
JS1300 5/32'' 783215-1
Ring Hot Dip Galv
JS8000 5/32'' 783221-6
57 2.9 1 1,100 194783-3
63 2.9 3 3,300 194769-7
63 2.9 1 1,100 194786-7
63 3.1 2 2,200 194771-0
63 3.1 1 1,100 194790-6
75 3.1 2 2,200 194774-4
75 3.1 1 1,100 194793-0
83 3.1 1 1,100 194794-8
83 3.1 1 1,000 194795-6
Smooth Bright
90 3.1 2 2,200 194776-0
Smooth Galv
90 3.1 2 2,200 194777-8
Smooth Hot Dip Galv
90 3.1 2 2,200 194778-6
90 3.1 1 1,100 194797-2
Unilock Hot Dip Galv
75 3.1 2 2,200 194775-2
90 3.1 2 2,200 194779-4
Flat Tape Collated Screws
50pcs screws/belt, 1,000pcs screws/box
*Sorted by the strength for corrosion resistance

Drywall Screws

attachment set


Autofeed
Dia (mm)
L (mm)

Screws

Screws
Recess
Shank

/Belt

/Box
Application Thread Finish DFR540 DFR550 DFR750 6842 6843 6844 6845
Part No.

25- 25- 45- 25- 25-

25-55mm 25-55mm 45-75mm
55mm 55mm 75mm 41mm 55mm
25 3.5 PH2 Fine Phosphated 50pcs 1000pcs  Yes      Yes F-31227
25 3.9 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-30913
30 3.9 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-30926
32 3.5 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31018
Drywall to metal
stad 35 3.5 PH2 Fine Phosphated 50pcs 1000pcs  Yes      Yes F-31230
(Plasterboard to 35 3.9 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31153
metal stad)
41 3.5 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-32232
41 3.9 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31166
45 3.9 PH2 Fine Phosphated 50pcs 1000pcs Yes  Yes Yes Yes  Yes Yes F-30939
55 3.9 PH2 Fine Phosphated 50pcs 1000pcs Yes Yes Yes Yes Yes  Yes Yes F-30942
Drywall to Steel frame
Fine/ Self
(Plasterboard to Steel 35 3.5 PH2 Drilling
Phosphated 50pcs 1000pcs  Yes      Yes F-31195
frame)
30 3.9 PH2 Coarse Phosphated 50pcs 1000pcs Yes Yes  Yes Yes   Yes F-30955
30 3.9 PH2 Coarse Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-32203
33 3.5 PH2 Coarse Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes  F-31021
35 3.9 PH2 Coarse Phosphated 50pcs 1000pcs Yes Yes  Yes Yes Yes Yes Yes F-31179
Drywall to wood
(Plasterboard to 41 3.5 PH2 Coarse Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes  F-31034
wood)
41 3.9 PH2 Coarse Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31182
41 3.9 PH2 Coarse Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-32216
55 3.9 PH2 Coarse Phosphated 50pcs 1000pcs Yes   Yes Yes Yes  Yes F-31140
55 3.9 PH2 Coarse Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes Yes Yes Yes Yes  Yes F-32229
30 3.9 PH2 Hi-Low Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-32245
Drywall to wood
(Plasterboard to hard 41 3.9 PH2 Hi-Low Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-32258
wood)
55 3.9 PH2 Hi-Low Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes Yes Yes Yes Yes  Yes F-32261
30 4.2 PH2 Coarse, Part Thread Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-32528
Chipboard Screws
(Particleboard to wood)
42 4.2 PH2 Coarse, Part Thread Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes  Yes Yes   Yes F-32531
55 4.2 PH2 Coarse, Part Thread Yellow Zinc (5 micron) 50pcs 1000pcs Yes Yes Yes Yes Yes Yes  Yes F-32544
Fermacell Screws 30 3.9 PH2 Hi-Low Phosphated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31748
(Gypsum Fibreboard to
hard wood) 45 3.9 PH2 Hi-Low Phosphated 50pcs 1000pcs Yes Yes Yes Yes Yes Yes Yes Yes F-31751
Hardboard Screws 32 3.9 PH2 Hi-Low Dacromate 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31793
(HDF board to hard
wood) 41 3.9 PH2 Hi-Low Dacromate 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31809

Decking Screws 42 4.2 PH2 Coarse, Part Thread Stainless Steel 50pcs 1000pcs Yes Yes  Yes Yes   Yes F-32470
(Wood to wood㸧
55 4.2 PH2 Coarse, Part Thread Stainless Steel 50pcs 1000pcs Yes Yes Yes Yes Yes Yes  Yes F-32483
Wood Screws 40 4.2 PH2 Hi-Low Zinc Plated 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-31201
(Playwood to hard
wood) 55 4.2 PH2 Hi-Low Zinc Plated 50pcs 1000pcs Yes Yes Yes Yes Yes Yes  Yes F-31214

Wood Screws 45 4.2 SQ2 Coarse Yellow Zinc 50pcs 1000pcs Yes Yes Yes Yes Yes Yes   F-33205
(Wood to wood㸧
50 4.2 SQ2 Coarse Yellow Zinc 50pcs 800pcs Yes Yes Yes Yes Yes Yes   F-33218
41 4.2 SQ2 Coarse Geomet 50pcs 1000pcs Yes Yes  Yes Yes  Yes Yes F-33276
45 4.2 SQ2 Coarse Geomet 50pcs 1000pcs Yes Yes Yes Yes Yes Yes  Yes F-33289
Wood Screws
50 4.2 SQ2 Coarse Geomet 50pcs 800pcs Yes Yes Yes Yes Yes Yes  Yes F-33292
(Wood to wood㸧
63 4.2 SQ2 Coarse Geomet 50pcs 600pcs   Yes   Yes   F-33324
75 4.2 SQ2 Coarse Geomet 50pcs 600pcs   Yes   Yes   F-33340
Mixing blade

*With Bolt & Nut M8

Mixing Blade Bolt Shaft
 Bolt Size of Model
SIZE Material Part No. Bolt Size Part No. SIZE Part No.
Power Mixer

L=584mm DUT130
 130mm INOX A-43670 M8 x 18 265220-5 M12 168439-5
D=12mm UT1305

DUT130
L=584mm
 135mm Aluminum A-43723 W5/16 x 16 265475-2 M12 A-43773 UT1305
D=12mm
UT2204

DUT130
L=584mm
 150mm INOX *A-43686 --- --- M12 168439-5 UT1305
D=12mm
UT2204

L=584mm DUT130
 165mm INOX A-43692 M8 x 18 265220-5 M12 168439-5
D=12mm UT1305

L=584mm UT1305
 175mm Aluminum A-43701 W5/16 x 16 265475-2 M12 A-43773
D=12mm UT2204

L=584mm UT1305
 183mm Aluminum A-43739 W5/16 x 16 265475-2 M12 A-43773
D=12mm UT2204

L=584mm
190mm Steel A-33065 W5/16 x 16 265475-2 M12 A-43773 UT2204
D=12mm

L=584mm
 201mm Steel A-33071 W5/16 x 16 265475-2 M12 A-43773 UT2204
D=12mm

L=584mm
 220mm Aluminum A-43717 M8 x 16 265440-1 M12 A-43773 UT2204
D=12mm
Miscellaneous OPE Diamond Multi Tool Coated Abrasive Bonded Abrasive Brushing Cutting Fastening

208
217
218
Miscellaneous OPE Diamond Multi Tool Coated Abrasive Bonded Abrasive Brushing Cutting Fastening

208
219
Makita - A Global Brand

Makita have established directly operated business bases in about 50 countries around the world, and have upgraded
our sales network in over 170 countries and after-sales service capabilities to become one of the leading companies in
our industry. In addition, Makita is producing power tools in plants in China, U.S.A., U.K., Germany, Brazil, Romania and
Thailand. Currently, about 90% of our group’s manufacturing work in terms of production volume is carried out overseas.
Makita’s worldwide sales and service network, as well as the stable, high production quality ensured at its plants
worldwide, are the embodiment of the Makita brand.

308
No. of Sales and Services Bases

bases

NORTH EUROPE
AMERICA ASIA
4 27
10
companies
companies
companies JAPAN
19 branches,
116 sales offices
*Including the Miyakonojo
Sales Office opened in April 2019.

The Middle East

and Africa
2 companies

Oceania
Central and
South America
2 companies

Sales and Service Bases

6 companies

Production Bases

JAPAN JAPAN U.S.A. UNITED KINGDOM ROMANIA

Makita Corporation Headquarters Okazaki Plant Makita Corporation of America Makita Manufacturing Europe Ltd. SC Makita EU SRL

GERMANY BRAZIL CHINA CHINA THAILAND

Makita do Brasil Ferramentas Makita Manufacturing
Makita Engineering Germany Makita (China) Co., Ltd. Makita (Kunshan) Co., Ltd.
Elétricas Ltda. (Thailand) Co., Ltd.
 ASIA CORPORATE DIRECTORY

JAPAN INDIA VIETNAM

Makita Corporation Changsha sales branch (CCS) Makita Power Tools India Pvt. Ltd. Makita Vietnam Co. Ltd. Head office
Head office (Near Gaosheng Road) Head Office Unit 06, Block 16 18 L1-2,
3-11-8, Sumiyoshi-cho, Anjo, No.3,Building 5,Youxin Mechanical And Unit 2, Sy. No. 93/3 & 93/4, Street 3, VSIP II Industrial Park,
Aichi 446-8502 Electrical Market,Yuhua District, Koralur Village, Kasaba Hobli, Hoa Phu Ward, Thu Dau Mot City,
Phone: +81-(0)566-98-1711 Changsha,Hunan, P.R.China Hoskote Taluk, Bangalore – 560067. India. Binh Duong Province, Vietnam.
Fax: +81-(0)566-98-6021 Phone: +86-(0)731-8526-7792 Phone: +91-(0)80-2205-8200 Phone: +84-274-362-8338
www.makita.co.jp Fax: +86-(0)731-8526-7791 Fax: +91-(0)80-2854-9007 Fax: +84-274-362-8339
www.makita.in www.makita.com.vn
Okazaki plant Shijiazhuang sales branch (CSJ)
22-1, Watarijima, Nemunoki-cho, Okazaki, No.15, F District, Wanlian International Delhi Branch North Branch
Aichi 444-0232 Mechanical And Electrical City,No.560, 70/A 23, Rama Road Industrial Area, Unit 05, No.01, Street 6,
Phone: +81-(0)564-43-3111 Heping East Road,Changan Najafgarh Road, New Delhi – 110015.India. VSIP Bac Ninh Intergrated
District,Shijiazhuang,Hebei.P.R. CHINA Phone: +91(0)011-4701-4188 Township and Industrial Park,
Nisshin Office Postcode: 050000 Phu Chan Commune,
349 Minamiyama, Komenoki-cho,Nisshin, Phone: +86-(0)311-89864089 Chennai Branch Tu Son Town, Bac Ninh Province, Vietnam.
Aichi 470-0111 Fax: '+86-(0)311-85024612 No.30, Koyambedu, Phone: +84-222-376-5942
Phone: +81-(0)561-75-1500 Chennai – 600107. India. Fax: +84-222-376-5941
Makita (Kunshan) Co. Ltd. Phone: +91-(0)44-2479-2522
Tokyo branch office Nanzi Road, Kunshan Comprehensive Free Fax: +91-(0)44-2479-2533 Da Nang Service Center
3-5-3, Hongo, Bunkyo-ku, Trade Zone , Jiangsu. 102 Trieu Nu Vuong Street, Hai Chau 1
Tokyo 113-0033 Postcode: 215301 Kolkata Branch Ward,
Phone: +81-(0)3-3816-1141 Phone: +86-(0)512-57367367 P-46, Hide Road Extension, Hai Chau District, Da Nang City, Vietnam.
Fax: +81-(0)3-3813-1633 Fax: +86(0)512-57365575 Kolkata – 700088. Phone: +84-236-352-5079
West Bengal. India. Fax: +84-236-352-5479
Nagoya branch office Makita Power Tools (HK) Ltd. Phone: +91-(0)33-2439-1030 / 1060
2-33, Namiki,Nakamura-ku, Head office Can Tho Service Center
Nagoya 453-0856 Unit 1, 17/F., Grandtech Centre, Bangalore Service Centre 226 Vo Van Kiet Street, An Thoi Ward,
Phone: +81-(0)52-419-0561 8 On Ping Street, Shatin, N.T., Hong Kong Sowbhagya M Gopi NilayaNo. 66, Mission Binh Thuy District, Can Tho City, Vietnam.
Fax: +81-(0)52-413-0081 Phone: +852-2648-8683 Road, 2nd Main,Sudhamanagar, Bangalore Phone: +84-292-389-4358
Fax: +852-2648-5237 – 560027.India. Fax: +84-292-389-4359
Osaka branch office Phone: +91-80-2222-8200
1-26-8, Tenma, Kita-ku, Macau Service Centre Buon Ma Thuot Service Center
Osaka 530-0043 Em Macau, Rua Do Volong N°11, Cochin Branch 60 Y Jut, Thong Nhat Ward, Buon Ma Thuot
Phone: +81-(0)6-6351-8771 Rés-Do-Chão A Door No. XVI/443A, Jubilee Road, Kerala – City, Dak Lak Province, Vietnam.
Fax: +81-(0)6-6352-4607 Phone: +853-2835-4587 682040. India Phone: +84-262-355-4556
Fax: +853-2835-4135 Phone: +91-(0)48-4320-0003 Fax: +84-262-355-4557
Domestic sales offices www.makita.com.hk
Sapporo, Sendai, Niigata, Utsunomiya, Mumbai Service Centre Hai Phong Service Center
Saitama, Chiba, Yokohama, Shizuoka, Gifu, Makita (Taiwan) Ltd. Shop No. 11, Ground Floor, Satellite Silver, 15 Pham Hong Thai, Pham Hong Thai Ward,
Kanazawa, Kyoto, Hyogo, Hiroshima, Head office Opp. Star Plus, Marol Naka, Andheri-Kurla Hong Bang District, Hai Phong City, Viet
Takamatsu, Fukuoka, No.798, Sec. 2, Wenhua 3rd Rd., Road, Andheri (E), Mumbai – 400059. India. Nam
Kumamoto and other major cities Linkou Dist., New Taipei City 24459, Taiwan Phone: +91(0)022-4974-4092 Phone: +84-225-883-1429/1529
Phone: +886-(0)2-8601-9898
Fax: +886-(0)2-8601-2266 Ahmedabad Service Centre Nha Trang Service Center
CHINA www.makita.com.tw Aniket Estate, Near Sawan Hotel, Near 1053 Hai Thang Tu Street, Van Thanh Ward,
Makita (China) Co., Ltd. Sarkhej – Sanand Chokdi, S. G. Highway, Nha Trang City, Khanh Hoa Province, Viet
Head office & plant (MCC) Taichung sales branch Ahmedabad – 382210. India. Nam
No.288 South Huangpujiang Road, Kunshan No.131, Daxing Rd., Taiping Dist., Phone: +91(0)079-2689-0111 Phone: +84-258-382-3338
Development Zone, Jiangsu. Taichung City 411, Taiwan
Postcode:215335 Phone: +886-(0)4-2392-1650 Hyderabad Service Centre Ho Chi Minh Branch
Phone: +86-(0)512-57707710 Fax: +886-(0)4-2392-1653 3-3-10, Kings Way, Rashtra Pathi Road, 12 Trinh Van Can, Cau Ong Lanh Ward,
Fax: +86-(0)512-57713623 Secunderabad – 500003. India. 1 District, Ho Chi Minh City, Viet Nam
www.makita.com.cn Kaohsiung sales branch Phone: +91(0)040-4003-8000 Phone: +84-283-821-5191
No.105, Yucheng Rd., Sanmin Dist.,
Domestic sales department (MCS/MCCF) Kaohsiung City 807, Taiwan Peenya Service Center
No.318 South Wusongjiang Road, Kunshan Phone: +886-(0)7-343-0292~4 No. 36/B, F1, 2nd Phase, 1st Main Road, THAILAND
City, Jiangsu Province. Fax: +886-(0)7-341-3602 KIADB, NTTF Circlte, Peenya Industrial Makita Manufacturing (Thailand) Co., Ltd.
Postcode:215300 Area, Bangalore - 560058 219/1 Moo 6, Tambol Bowin,
+86-(0)512-57037500 Hualian factory service center Phone: Mob. +91 9606900302 Amphur Sriracha, Chonburi, 20230
+86-(0)512-57037118 No.247, Sec.2, Zhongyang Rd., Phone: +66-3300-4750
www.makita.com.cn Ji'an Township, Hualien County 973, Taiwan Chawari Bazar Service Centre Fax: +66-3300-4747
Phone: +886-(0)3-852-8901 Shop No. 4782, Bazar Ajmeri Gate, Hauz
Guangzhou sales branch (CGZ) Fax: +886-(0)3-852-8515 Qazi, Delhi - 110006
Rome 1001 1002,The First Floor,Jinhao Phone: Tel - 011-49145416 MALAYSIA
Building,No.38,Middle Of Huadi Avenue,Li Yunlin factory service center Makita Power Tools (Malaysia) Sdn. Bhd.
Wan No.197,Guangfu Rd., Pune Service Centre Head Office
District,Guangzhou,Guangdong,P.R.China Huwei Township, Yunlin County 632, Taiwan Shop No. 104, First Floor, Plot No. Lot 824, Jalan Subang 5, Subang Industrial
Phone: +86-(0)20-87518872 Phone: +886-(0)5-632-8200 PAP/J/121/122. J Block, MIDC Bhoasari, Area,
Fax: +86-(0)20-87518873 Fax: +886-(0)5-632-8190 Pimpri Chinch Wad, Pune - 411026 47500 Subang Jaya, Selangor, Malaysia
Phone: Mob. +91 7798779737 Phone: +60-(0)3-8023-0824
Shanghai sales branch (CSH) Pingtung factory service center Fax: +60-(0)3-8022-1448
Room.102&103,1F,No.128,East Luoxiu No.12&16,Ruimin Rd., Rudrapur Service Centre
Road,Xuhui District,Shanghai,P.R.China Pingtung City 900, Taiwan MIG-48, Ground Floor, Ward No. 19, New Johor(Johor Bahru) Service Center
Phone: +86-(0)21-54487198 Phone: +886-(0)8-722-0001 Ward no. 38, Near Siddhu Palace, Awas No. 12 & 14, Jalan Rosmerah 2/9,
Fax: +86-(0)21-62476732 Fax: +886-(0)8-722-0733 Vikas, Rudrapur, Uttarakhand - 263153 Taman Johor Jaya, 81100 Johor Bahru,
Phone: Mob.+91 7042597756 Johor
Tianjin sales branch (CTJ) Phone: +60-(0)7-364-9406
No.3 Office Building,No.23,Quanwang SINGAPORE Tirchy Factory Service Centre Fax: +60-(0)7-364-9407
Road,Wuqing Development Makita Singapore Pte. Ltd. NO.415, No.S1/17A, EGA PLAZA, Trichy
Area,Tianjin,P.R.China 7, Changi South Street 3, Tanjore Main Road, Thuvakudi, Tirchy - Sarawak(Kuching) Service Center
Phone: +86-(0)22-29395799 Singapore 486348 620015 No. 7, Lot 3330, Jalan Wan Alwi, Lorong 3A,
Fax: +86-(0)22-29395769 Phone: +65-6546-8700 Phone: Mob. +91 9600291989 Taman Linang/ Suboh,93350 Kuching
Fax: +65-6546-8711 Sarawak
Chengdu sales branch (CCD) www.makita.com.sg Jamshedpur Service Centre Phone: +60-(0)82-503-361
2F,Building 1,Hatchery Building, No.9,Wu Ke Shop no. 24, Shivaranjani Complex, Plot no. Fax: +60-(0)82-505-361
Dong San Road,Wu Hou Myanmar Service Center ST-8, Mouzadindli, Adityapur, P.S.Adityapur
District,Chengdu,Sichuan, P.R. China No. D36/2, Lan Thit Road, Nant Thar Ghone Ward no. 5, Saraikel (D), Kharswan, Sabah(Kota Kinabalu) Service Center
Phone: +86-(0)28-85366002 District, Insein Township, Yangon Jharkhand State Lot 19, Jalan Buah Duku,
Fax: +86-(0)28-87337018 Phone: +95-(0)9-76232-6433 Phone: Mob. +91 9830137136 Kolombong Light Industrial Estate,
Phone: +95-(0)9-76911-5388 Off Kolombong, Kolombong Zone 1, 88450
Shenyang sales branch (CSY) Indore Service Centre Inanam, Kota Kinabalu, Sabah
No.2,10A,No.7 Street,Economic and Cambodia Service Center Unit No. B-34, Block No. B-18, Access B, Phone: +60-(0)88-388-278
Technological Development Zone, No.432,St.271, New Siyaganj,Poddar Plaza, HTL, Unit 2, Fax: +60-(0)88-388 279
Shenyang, Liaoning , P.R. CHINA Sangkat Tumnup Teuk, VIP Route No.1, Kachhi Mohalla, Indore
Postcode：110141 Khan Chamkarmon,Phnom Penh Phone: Mob. + 91 9329217701
Phone: +86-(0)24-22530648 Phone: +855-(0)23-994-071/2
Fax: +86-(0)24-22530170 Fax: +855-(0)23-994-073
https://www.makita.com.kh/
Xian sales branch (CXA)
1 & 2F, Xian Youzhi Science and Technology
Industrial Park NO.75 Mingguang Road,
Economic And Technological Development
Zone, Xian, Shanxi. P.R. CHINA
Postcode:710018
Phone: +86-(0)29-86223736
Fax: +86-(0)29-86229230
 AMERICAS EUROPE

UNITED STATES MEXICO ARGENTINA UNITED KINGDOM

Makita U.S.A. Inc. Makita México, S.A. de C.V. Makita Herramientas Eléctricas de Makita (U.K.) Ltd.
Corporate office Head office Argentina S.A. Head office
14930 Northam Street, La Mirada, Camino Viejo A San Lorenzo Tepaltitlan LISANDRO DE LA TORRE 1246, Michigan Drive, Tongwell, Milton Keynes,
CA 90638-5753, USA (Jose Marti) No.227 PARQUE INDUSTRIAL PILARICA, Bucks MK15 8JD
Phone: +1-714-522-8088 FATIMA, PILAR PROVINCIA DE BUENOS Phone: +44-(0)1908-211678
Col. Tlacopa, Toluca, Estado De Mexico, AIRES, CP1629 Fax: +44-(0)1908-211400
Fax: +1-714-522-8133
www.makitatools.com C.P. 50010 Phone: +54 (230)444-1100 www.makitauk.com
Phone: +52-722-385-8800 Fax: +54 (230)444-1105
Western regional / 237-3293 www.makita.com.ar Scotland factory service center
(Los Angeles) office www.makita.com.mx Unit 4A, Albion Trading Estate,
14930 Northam Street, La Mirada, 750 South Street, Glasgow, G14 0SY
CA 90638-5753 Mexico city factory service center CHILE Phone: +44-(0)141-9545861
Phone: +1-714-522-8088 Norte 35 #780-C Col. Industrial Vallejo, Del. Makita Chile Comercial Ltda.
Fax: +1-714-297-1544 Azcapotzalco Mexico, D.F. Mexico C.P. Head Office London factory service center
02300 AV.EL PARQUE 1307,PARQUE 5,MODULO 12, V5 Vector Park, Forest Road, Felthm,
(Western) office Phone: +52-55-5567-3387 6(&725(1($321,(17(38'$+8(/¬ Middlesex, TW13 7EJ
10200 Military Rd, Reno, NV, 89506 / 5368-2937 SANTIAGO,CHILE CP9031244 Phone: +44-(0)20-88900586
Phone: +56-2-2540-0400
Central regional Guadalajara factory service center www.makita.cl Makita International Europe Ltd.
(Chicago) office AV.Sierra Mazamitla #5864 Michigan Drive, Tongwell, Milton Keynes,
1450 Feehanville Drive, Mount Prospect, Col.Pinar De La Calma Zapopan, Jalisco Temuco factory service center Bucks MK15 8JD
IL 60056-6011 C.P. 45080 Av. Pedro de Valdivia #524, Temuco Phone: +44-(0)1908-211678
Phone: +1-847-297-3100 Phone: +52-33-3632-8032 Phone: +56-(0)2-2540-0460
Fax: +1-847-297-1544 / 3632-8057 Makita Manufacturing Europe Ltd.
Hortonwood 7, Telford, Shropshire TF1 7YX
Eastern regional Monterrey factory service center PERU Phone: +44-(0)1952-677688
(Atlanta) office Avenida Pablo Livas #4207 Makita Peru S.A. Fax: +44-(0)1952-677678
2660 Buford Highway, Buford, Colonia Guadalupe victoria, Municipio Panamericana Sur - Km. 29, Distrito de
GA 30518-6045 Guadalupe nuevo León, C.P.67180 Lurin, Provincia de Lima Centro de
Phone: +1-770-476-8911 Phone: +52-81-8372-4205 Operaciones “MEGACENTRO LURIN” FRANCE
Fax: 866-521-3541 / 8372-4193 Locales B1, B23, B24 Makita France SAS
Free Dial USA only Phone: +51-(1)-713-1212 Head office
Queretaro factory service center www.makita.pe 37, avenue Graham Bell, ZAC Léonard de
Southern regional Calle Av. Del Parque #1024 Vinci,
(Dallas) office Col. Vista Alegre C.P.76074, Bussy Saint-Georges, 77607 Marne-la-Vallée
910 E. Pleasant Run Road, Wilmer, TX Queretaro,Queretaro Bolivia Branch Cedex 3
75172 Phone: +52-442-222-6824 Av. Japón Nro. 3340 (3er. Anillo externo) Phone: +33-(0)1-6094-6400
Phone: +1-972-441-8099 / 222-9170 entre Av. Alemana y Mutualista Fax: +33-(0)1-6094-6380
Fax: +1-855-231-0468 Phone: +59-(1)-3347-1147 www.makita.fr

Factory service centers BRAZIL Nantes office

Atlanta, Boston, Chicago, Dallas, Denver, Makita do Brasil Ferramentas Elétricas COLOMBIA Le Pan Loup, 44220 Couéron
Florida, Houston, Las Vegas, Los Angeles, Ltda. MAKITA COLOMBIA S.A.S Phone: +33-(0)2-5177-8977
New Jersey, Portland, San Francisco Head office & plant Kilometro 7 Autopista Bogota - Medellin, Fax: +33-(0)2-4063-8376
5RGRYLD%5.P SLVWDQRUWH ¬ Centro Empresarial Celta Trade Park
Makita Corporation of America Bairro Colônia Dona Luíza, Lote 123 Bodega 3 Funza – Cundinamarca , Bordeaux office
2650 Buford Highway, Buford, CEP 84043-450 - Ponta Grossa, PR Colombia 137, Rue de la Croix-de-Monjous,
GA 30518-6045 Phone: +55-(0)42-3302-2100 Phone: +57-1-742-9245 33170 Gradignan
Phone: +1-770-932-2901 Fax: +55-(0)42-3302-2120 Fax: +57-1-896-6367 Phone: +33-(0)5-5796-5270
Fax: +1-770-932-2905 www.makita.com.br www.makita.com.co Fax: +33-(0)5-5796-5275

Makita Latin America Inc. São Paulo sales office Paloquemao factory service center Nord office
Head office Rua Makita Brasil, 200 -Bairro Cooperativa - Carrera 22#18-63, Bogota, 9LOODJHG·(QWUHSULVHV5XH7UpPLqUH
10801 NW 97th Street #13 Medley, São Bernardo do Campo - SP CEP Cundinamarca, Colombia 9LOOHQHXYHG·$VFT
FL USA 33178 09852-080 Phone: +57-1-742-9245 EXT.532 Phone: +33-(0)3-2059-7020
Phone: +1-305-882-0522 Phone: +55-(0)11-4392-2411 Fax: +33-(0)3-2047-2220
Fax: +1-305-882-0484 / 2199-2500
www.makitalatinamerica.com Fax: +55-(0)11-4392-2471 Dijon office
5, Rue Edmond Voisenet, 21000 Dijon
Makita Latin America Inc. Bahia sales branch Phone: +33-(0)3-8054-0880
Panama Branch Rua Itagi, 491- Bairro Fax: +33-(0)3-8054-0881
Local Comercial No.4, Albrook Office Center, Pitangueiras - Lauro de Freitas,
calle Diego Dominguez, Albrook, BA CEP: 42701-370 Toulouse office
Panama City,Panama Phone: +55-(0)71-3252-0154 15, Rue de Boudeville, Z.I. de Thibaud,
Phone: +507-315-0305 31104 Toulouse
Fax: +507-315-0651 Paraná sales branch Phone: +33-(0)5-6143-2200
Rua Comendador Roseira, Fax: +33-(0)5-6143-2201
499 Bairro Prado Velho,
CANADA Curitiba, PR CEP 80215-210
Makita Canada Inc. Phone: +55-(0)41-3333-8070 SPAIN
Head office Makita, S.A.
1950 Forbes Street, Whitby, ON L1N 7B7 São Paulo service center Head office
Phone: +1-905-571-2200 Rua Luis Gois, 111 Bairro Mirandópolis, C/ Juan de la Cierva, 7-15,
Fax: +1-905-433-4779 São Paulo, SP CEP 04043-250 28820 Coslada (Madrid)
www.makita.ca Phone: +55-(0)11-5594-3900 Phone: +34-91-671-1262
Fax: +34-91-671-8293
Western regional office Rio de Janeiro service center www.makita.es
11771 Hammersmith Way, Richmond, Av. Das Américas, 2250 - Loja J/K - Barra da
BC V7A 5H6 Tijuca - Barcelona factory service center
Phone: +1-604-272-3104 Rio de Janeiro, RJ CEP:22640-101 &DUUHWHUDGHO0LJQž/·+RVSLWDOHWGH
Fax: +1-604-272-5416 Phone: +55-(0)21-3151-7933 Llobregat (Barcelona)
Phone: +34-935-669-124
Quebec and Pernambuco service center
Atlantic regional office Av. Marechal Mascarenhas de Morais, 630,
6389 Boul. Couture, St. Léonard, Bairro Imbiribeira, PORTUGAL
Quebec H1P 3J5 Recife, PE CEP 51170-000 Makita Farramentas Electricas,
Phone: +1-514-323-1223 Phone: +55-(0)81-3428-0210 Sociedade Unipessoal, Lda.
Fax: +1-514-323-7708 Centro empresarial de Alverca,
Minas Gerais service center Vale das Ervas, Armazém C2
Factory service centers Rua Juiz de Fora, 95 - Bairro Barro Preto, 2615-187 Alverca do Ribatejo
Burnaby(Vancouver), Calgary, Belo Horizonte, MG CEP 30180-060 Phone: +351-219-936-750
Dartmouth(Halifax), Edmonton, Les Phone: +55-(0)31-2531-2017 Fax: +351-219-574-982
Saules(Quebec City), www.makita.pt
London, Mississauga(Toronto), Pará Sales Branch
Nepean(Ottawa), Rodovia BR 316, Km 04 Loja 04-Bairro
Richmond(Vancouver), Saskatoon, Águas Lindas,Ananindeua / PA CEP ITALY
St. Leonard(Montreal), Whitby, Winnipeg 67020-000 Makita S.p.A.
Phone: +55-(0)91-3237-7186 Via Sempione 269/A,
20028 San Vittore Olona (MI)
Rio Grande do Sul service center Phone: +39-0331-524111
Av. Sertorio , 5539 - JD. Lindoia - Porto Fax: +39-0331-420285
Alegre - RS CEP: 91050-371 www.makita.it
Phone: +55-(0)51-3344-1464
 MIDDLE EAST/
AFRICA

GREECE DENMARK ROMANIA UNITED ARAB EMIRATES

Makita Hellas S.A. Makita Elværktøj Danmark Makita Romania S.R.L. Makita Gulf FZE
Tatoiou 34, Acharnes, ATTIKI PC13677 Denmark office Str. I.C.Bratianu nr. 164 Depozit Faza 3 P.O. Box 17133,
Phone: +30-210-8071241 Erhvervsbyvej 14, 077030 Comuna Branesti jud. Ilfov Jebel Ali Free Zone, Dubai, UAE
Fax: +30-210-8072245 8700 Horsens Romania Phone: +971-(0)4-8860-804
www.makita.gr Phone: +45-76-254400 Phone: +40 21 569 80 61 Fax: +971-(0)4-8860-805
Fax: +45-76-254401 +40 21 569 80 62 www.makita.ae
www.makita.dk Fax: +40 21 569 80 59
FINLAND www.makita.ro
Makita Oy
Teilimäki 4 FIN-01530 Vantaa, Finland SWITZERLAND SC Makita EU SRL TANZANIA
Phone: +358-(0)9-857-880 Makita SA Str.I.C. Bratianu, nr.164, Comuna MAKITA AFRICA LIMITED
Fax: +358-(0)9-857-88211 Chemin du Vuasset 7 CH-1028 Preverenges Branesti, P O Box. 20998, Staywell Tower, 2nd
www.makita.fi Phone: +41-(0)21-811-5656 jud. ILFOV, ROMANIA 077030 Floor, Haile Selasie Road, Msasani
Fax: +41-(0)21-811-5678 Phone: +40-21-310-7675 Peninsula Dar es Salaam, Tanzania
www.makita.ch Fax: +40-21- 200-0219 Phone: +255 22 260 2870
ESTONIA
Makita Oy Estonian Branch Espace Mitteland Training Service Center
Estonian office Lerchenweg 14 BULGARIA
Piirimäe 13, 76406 Saku vald, Harjumaa 4538 Oberbipp Makita Bulgaria EOOD
maakond Phone: +41-(0)32 631 01 76 Okolovrasten Pat (circle road), No.373,
Phone: +372-6-510-380 Fax: +41-(0)32 631 01 79 Sofia 1186, Bulgaria
Fax: +372-6-510-399 Phone: +359-2-921-0551
www.makita.ee Fax: +359-2-921-0550
AUSTRIA www.makita.bg

LATVIAN
Makita Werkzeug Gesellschaft m.b.H.
Airportstraße 4, A-2401 Fischamend
OCEANIA
Latvian factory service center Phone: +43-(0)2232-77700-0 RUSSIA
Vienības gatve 153/1, Mārupe Mārupes nov. , Fax: +43-(0)2232-77700-13 Makita LLC
LV-2167, LATVIA www.makita.at 1, build. 1, Permskaya str. , Moscow,
Phone: +371 67969563 Russia, 107143
Phone: +7 (495)-915-88-66
SLOVENIA Fax: +7 (495) 916 57 31 AUSTRALIA
LITHUANIAN MAKITA.d.o.o. www.makita.ru Makita (Australia) Pty. Ltd.
Lithuanian factory service center Brnčičeva 17, SI-1231 Ljubljana-Črnuče, Head office
L. Zamenhofo g. 3, Vilnius, LT-06332 , LITHUANIA Slovenia MAKITA LLC, Vladivostok branch 2 Litton Close Pemulwuy. NSW. 2145
Phone: +370 5 236 0400 Phone: +386(0) 590 83 600 83, 1st RABOCHAYA str. ARTEM 692770, Phone: +61 1300 361 690
Fax: +386(0) 590 83 601 RUSSIA Fax: +61 1300 361 770
www.makita-see.com Phone: +7(423)202-65-23 www.makita.com.au
SWEDEN
Makita Sweden MAKITA LLC, Novosibirsk branch Hobart office
Bergkällavägen 36 B CROATIA 15, Dargomyzhskogo str., Novosibirsk, 32a Chapel Street Glenorchy, TAS 7010
192 79 Sollentuna, Sweden. Croatia factory service center Russia, 630047 Phone: +61 1300 361 690
Phone: +46-8-505-819-00 Kreše Golika 3A, HR- 10000 Zagreb Phone: +7 (383) 209 18 19 Fax: +61 1300 361 770
Fax: +46-8-505-819-69 Phone: +385 1 2078 252 Fax: +7 (383) 209 18 19
www.makita.se www.makita-see.com Perth office
MAKITA LLC, St.Petersburg branch 374A Kenwick Rd Maddington WA 6109
Shpalernaya street 54, letter В, premise Phone: +61 1300 361 690
NORWAY UKRAINE 25-Н, Fax: +61 1300 361 770
Makita Norway Makita Ukraine LLC Saint Petersburg, Russia, 191015
Løxaveien 11A Onikyienka Oleha Str., building 61, Phone: +7 (812) 244-47-84 Factory Service Center
N-1351 Rud Norway Brovary city, 07400 Sydney, Melbourne, Brisbane, Perth,
Phone: +47-67 17 69 00 Phone: +38 (044) 494-23-70 MAKITA LLC, Samara Branch Hobart
www.makita.no +38 (044) 494-23-71 3 Mirnaya str., Samara, Russia, 443035
Fax: +38 (044) 494-23-73 Phone: +7 (846) 202 90 50
www.makita.ua +7 (846) 202 42 83 NEW ZEALAND
THE NETHERLANDS Makita (New Zealand) Ltd.
Makita Nederland B.V. MAKITA LLC, Krasnodar branch Head office
Park Forum 1101 POLAND 32/2, Turgenevskoe, Takhtamukaisky 46 Westpoint Drive, Hobsonville,
5657HK Eindhoven Makita Sp. z o.o. district, Adygea Republic, Russia, Auckland 0618
Phone: +31-(0)40-206-4040 Head office 385132 Phone: +64-(0)9-479-8251
Fax: +31-(0)40-206-4096 ul. Bestwińska 103 Phone: +7 (861) 238 24 97 Fax: +64-(0)9-479-8259
www.makita.nl 43-346 Bielsko - Biała www.makita.co.nz
Phone: +48-(0)33-484-0200 MAKITA LLC, Yekaterinburg Branch
Fax: +48-(0)33-818-4059 5, pereulok Avtomatiki, Yekaterinburg, Christchurch Office
BELGIUM www.makita.pl Russia, 620049 Unit10, 11, 8 Islington Ave,
S.A. Makita N.V. Phone: +7 (343) 286 00 09 Waterloo Park Christchurch
Jan-Baptist Vinkstraat 2 Warsaw branch Phone: +64-(0)3-930-0500
3070 Kortenberg Moszna-Parcela 29
Phone: +32-(0)2-257-1840 05-840 Brwinów KAZAKHSTAN Factory Service Center
Fax: +32-(0)2-253-0101 Phone: +48-(0)22-177-7300 Makita Kazakhstan LLP Auckland, Christchurch
www.makita.be Kommunalnaya 39, 050016, Almaty,
Kazakhstan
GERMANY CZECH REPUBLIC Phone: +7 727 233 0827
Makita Werkzeug GmbH Makita, spol. s r.o. Fax: +7 727 382 7921
Head office Kaštanová 555/125d 620 00 Brno
Makita Platz 1, Phone: +42-(0)5-432-16944
40885 Ratingen Fax: +42-(0)5-432-16946
Phone: +49 (0)2102 1004-0 www.makita.cz
Fax: +49 (0) 2102 1004-128
www.makita.de Prague Service Center
https://www.dolmar.de/ K Bílému Vrchu 3040/16, 193 00 Prague 9
Phone: +42-(0)2-991-40585
Makita Service Center Hamburg
Jenfelder Strasse 38,
22045 Hamburg SLOVAKIA
Phone: +49 (0) 2102 1004-456 Makita s.r.o.
Jegorovova 35
Makita Service Center Berlin 974 01 Banská Bystrica
Gartenfelder Straße 29 – 37 Phone: +421-(0)48-4161-772
Gebäude 44, 13599 Berlin Fax: +421-(0)48-4161-769
www.makita.sk
Makita Engineering Germany GmbH
Jenfelder Strasse 38,
22045 Hamburg HUNGARY
Phone: +49-(0)40-66986-0 Makita Elektromos Kisgépértékesítö Kft.
Fax: +49-(0)40-66986-352 8000, Székesfehérvár, Takarodó út 2
www.makita-engineering.de Phone: +36-22-507-472
Fax: +36-22-507-484
www.makita.hu
 Accessory Catalogue

www.makita.com

PRINTED IN JAPAN Z11211-2 TSFHAA-201912