Scribd
Upload
15 views

Example of Use - Mold Making

Sphere.core SBC is an ideal core material for making durable and light molds due to its stability, easy processing, resin compatibility, and durability. The document provides suggestions for composite molds made with Sphere.core SBC including gelcoat and fiberglass layers for small, medium, and big molds.

Uploaded by

dptotecnicoads
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Example of Use - Mold Making

Sphere.core SBC is an ideal core material for making durable and light molds due to its stability, easy processing, resin compatibility, and durability. The document provides suggestions for composite molds made with Sphere.core SBC including gelcoat and fiberglass layers for small, medium, and big molds.

Uploaded by

dptotecnicoads
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Mold making

Sphere.core SBC is the ideal core material for making durable and light molds - - - Why?

Stability of shape: Due to its low resin consumption (approx. 400-450 g/m²/mm) and when
combined with mold resins, shrinkage of the mold is almost eliminated.

Easy and efficient processing: Dry Sphere.core SBC material can be cut in the required shape
simply by using scissors or a knife. When impregnated with resin, the material gets soft.
Overlapping areas can easily and entirely be flattened. Wet-in-wet processing considerably
reduces working time.

Resin compatibility: Sphere.core SBC is compatible with UP, VE resin with a normal hand lay up
viscosity. Sphere.core SBC HT is compatible with epoxy resin.
We recommend to use high quality resin, but there is no need to use special tooling resin. In any
case we suggest to test the compatibility of your resin on a small Sphere.core SBC sample in
advance.

Durability: Its high impact strength ensures durability and prevents damages from demolding.

Below please find some suggestions for composite molds made with Sphere.core SBC:

Small mold Gelcoat


(11 mm thickness) 1 layer CSM 225 g/m²
2 layers CSM 450 g/m² Laminate these
1 layer Sphere.core SBC 6,0 mm layers wet-in-wet
2 layers CSM 450 g/m²
Medium-sized mold Gelcoat
(16 mm thickness) 1 layer CSM 225 g/m²
2 layers CSM 450 g/m²
1 layer MX 600 g/m² + CSM 450 g/m² Laminate these
1 layer Sphere.core SBC 10,0 mm layers wet-in-wet
2 layers MX 600 g/m² + CSM 450 g/m²
Big mold Gelcoat
(23 mm thickness) 1-2 layers CSM225 g/m²
2 layers CSM 450 g/m²
1 layer complex MX 600 g/m²/CSM 450 g/m²
1 layer Sphere.core SBC 8,0 mm Laminate these
1 layer CSM 300 g/m² layers wet-in-wet
1 layer Sphere.core SBC 8,0 mm
2 layers complex MX 600 g/m²/CSM 450 g/m²
++ For molds made in VIP, we offer Sphere.core SBC IP. Please contact us for more detailed information++
Mold making 140218

When you simply need the best


www.spheretex.com

You might also like