0% found this document useful (0 votes)
26 views

Elite (Snap-In) PG Series

The document provides specifications for aluminum electrolytic capacitors in the PG Series, including operating temperature range, voltage and capacitance ratings, dissipation factor and leakage current limits, endurance and shelf life parameters. It also lists permissible ripple current ratings and dimensions for various capacitor sizes.

Uploaded by

zuigh899g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
26 views

Elite (Snap-In) PG Series

The document provides specifications for aluminum electrolytic capacitors in the PG Series, including operating temperature range, voltage and capacitance ratings, dissipation factor and leakage current limits, endurance and shelf life parameters. It also lists permissible ripple current ratings and dimensions for various capacitor sizes.

Uploaded by

zuigh899g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

A L U M I N U M E L E C T R O LY T I C C A PA C I T O R S

PG Series
Smaller size with higher ripple current.
Load life 5,000 hours at 105℃.
SPECIFICATIONS
Item Performance Characteristics
Category Temperature Range -25 ~ +105℃
Working Voltage Range 200 ~ 450Vdc
Capacitance Range 68 ~ 2,200μF
Capacitance Tolerance ±20% (at 25℃ and 120Hz)

Dissipation Factor
(tanδ) Rated Voltage (V) 200 220 250 400 420 450
(at 25℃, 120Hz) tanδ(Max) 0.20 0.20 0.20 0.25 0.25 0.25

I=0.02CV or 3000μA,whichever is smaller


Leakage Current I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.

The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated
voltage applied for 5,000 hours at 105℃.
Capacitance change ≦ ±20% of the initial value
Endurance
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ specified value

The following requirements shall be satisfied when the capacitor are restored to 25℃ after exposing
them for 1,000 hours at 105℃ without voltage applied.
Capacitance change ≦ ±20% of the initial value
Shelf Life
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ 200% of the specified value

Others Conforms to JIS-C-5101-4 (1998), characteristic W.

DIMENSIONS (mm)
A L U M I N U M E L E C T R O LY T I C C A PA C I T O R S

PG Series
Case size & Permissible rated ripple current (mA rms) 120Hz / 105℃:
Vdc 200 Vdc 220
ФD Ф 22 Ф 25 Ф30 Ф35 ФD Ф 22 Ф 25 Ф30 Ф35
uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC
270 22×31 1010 220 22×31 900
330 22×35 1150 270 22×31 950
390 22×41 1210 25×31 1200 330 22×35 1200 25×31 1150
470 22×45 1330 25×35 1320 390 22×41 1300 25×35 1320
560 22×51 1470 25×41 1460 30×31 1460 470 22×45 1520 25×41 1400 30×31 1350
680 25×45 1620 30×35 1630 560 22×51 1610 25×45 1510 30×35 1510
820 25×51 1780 30×41 1830 35×31 1820 680 25×51 1710 30×41 1660 35×31 1620
1000 30×45 2100 35×35 2100 820 30×45 1820 35×35 1760
1200 30×51 2410 35×41 2420 1000 30×51 2160 35×41 2140
1500 35×51 2810 1200 35×45 2520
1800 1500 35×51 2960
Vdc 250 Vdc 400
ФD Ф 22 Ф 25 Ф30 Ф35 ФD Ф 22 Ф 25 Ф30 Ф35
uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC
120 68 22×25 470
150 82 22×25 580
180 100 22×31 640 25×25 640
220 22×31 910 120 22×35 690 25×31 680
270 22×35 1050 150 22×41 810 25×31 810 30×25 750
330 22×41 1170 25×35 1160 180 22×45 900 25×35 890 30×31 870
390 22×45 1360 25×41 1330 30×31 1360 220 22×51 1010 25×41 1000 30×35 1000 35×31 1000
470 22×51 1460 25×45 1430 30×35 1510 270 25×51 1100 30×41 1100 35×31 1110
560 25×51 1640 30×41 1640 330 30×45 1310 35×35 1310
680 30×45 1820 35×35 1820 390 30×51 1410 35×41 1420
820 30×51 1990 35×41 2030 470 35×45 1530
1000 35×45 2140 560 35×51 1680
1200 35×51 2760 680 35×55 1880
Vdc 420 Vdc 450
ФD Ф 22 Ф 25 Ф30 Ф35 ФD Ф 22 Ф 25 Ф30 Ф35
uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC uF ФD×L RC ФD×L RC ФD×L RC ФD×L RC
68 22×25 460 68 22×25 490
82 22×31 590 25×25 600 82 22×31 590
100 22×35 630 25×31 620 100 22×35 640 25×31 640 30×25 580
120 22×41 670 25×31 700 30×25 750 120 22×41 690 25×35 690 30×25 670
150 22×45 790 25×35 800 30×31 770 150 22×45 810 25×41 810 30×31 740 35×25 690
180 22×51 880 25×41 870 30×31 890 180 22×51 900 25×45 870 30×35 840 35×31 790
220 25×45 990 30×35 1050 35×31 980 220 25×51 1010 30×41 940 35×31 970
270 25×51 1270 30×41 1100 35×35 1080 270 30×45 1070 35×35 1080
330 30×45 1260 35×41 1230 330 30×51 1210 35×41 1250
390 30×51 1380 35×45 1350 390 35×45 1380
470 35×51 1450 470 35×51 1560
560 35×55 1650 560

RIPPLE CURRENT MULTIPLIERS


Frequency Multipliers
Frequency (Hz)
Vdc
50/60 120 1K 10K 100K
200 ~ 250 0.80 1.00 1.20 1.30 1.40
400 ~ 450 0.80 1.00 1.10 1.12 1.15

You might also like