Scribd
Upload
20 views

Acknowledgement: Dr. K Ezhilarasan

hdufhfgdfgdfdhvdvkuxhccgsddjsdgjzdiusadhzgchzkxhzjhgcjkzhaiosuhzgzhcgzuchz cjzhxghjsagcushczjhcgzhchgzchsjhshgchgxixdgfxhcx

Uploaded by

anilvs2004
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Acknowledgement: Dr. K Ezhilarasan

hdufhfgdfgdfdhvdvkuxhccgsddjsdgjzdiusadhzgchzkxhzjhgcjkzhaiosuhzgzhcgzuchz cjzhxghjsagcushczjhcgzhchgzchsjhshgchgxixdgfxhcx

Uploaded by

anilvs2004
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ACKNOWLEDGEMENT

The satisfaction that accompanies the successful completion of this project would be
incomplete without the mention of the people who made it possible, without whose constant
guidance and encouragement would have made efforts go in vain.

I would like to express my thanks to Dr. K Ezhilarasan, Assistant Professor and Head,
Department of Electronics and Communication Engineering, School of Engineering and
Technology, CMR University, Bangalore, for his encouragement that motivated me for the
successful completion of Project work.

I express my thanks to my Internal Project Guide Dr. Karabi Baruah, Assistant Professor,
Department of Electronics and communication Engineering, School of Engineering and
Technology, CMR University for her constant support.

Roshini J
16UG09030
DECLARATION

I Roshini J (Reg. No. 16UG09030) student of 3rd semester B.Tech, Computer Science and
Engineering, School of Engineering and Technology, Bangalore, hereby declare that the project
work entitle“………….” has been carried out by me under the guidance of Dr. Karabi Baruah,
Assistant Professor, Department of Electronics and Communication, School of Engineering and
Technology. This report is submitted in partial fulfillment of the requirement for award of
Bachelor of Technology in Computer Science and Engineering, by CMR University, Bangalore
during the academic year 2023-2024. The project report has been approved as it satisfies the
academic requirements in respect of project work prescribed for the said degree.

Place: Bangalore Roshini J

Date: 16UG09030
ABSTRACT

Wipro GE Healthcare manufactures Amplifiers and Power supply for MRI Scanning
Machine. In the assembly of Amplifiers and power supply they make use of IGBT Brick. IGBT
Brick is a combination of two IGBTs. There are four terminals E1, G1, E2 and G2 which are
externally connected to the circuit of amplifiers and power supply. Four terminals have four
connecting cables, they use color code to connect those four cables to the terminals of IGBT
Brick. While connecting they mismatch the color, therefore the terminals not connected to circuit
with proper configuration. The proposed method designs an IGBT cable connection JIG, which
checks the terminal connections. Once the amplifiers and power supply are assembled they are
exported to other branch of GE Healthcare, where the complete assembly takes place. While
export the product they issue CoC(Certificate of Compliance) so that the other branch can
assembly the product for MRI Machine. They issue certificate manually, certificate was
misplaced or damaged during export so they had to refer to the complete assembly details and
issue the CoC Certificate again. As this is time consuming we digitized the CoC Certificate, so
that it will be stored and can be issued whenever required. When the product occurs for rework,
the processing manager should issue the Autopsy Certificate to continue the further processes.
This certificate is issued manually, this would be misplaced. Therefore the further process was
not continued till the certificate is reissued. As this was time consuming for further process, we
digitized the certificate so that it can be stored and the soft can be used as reference of issue and
the further process was continued.
TABLE OF CONTENTS

CHAPTER CONTENTS PAGE


NO. NO.
ABSTRACT i
ACKNOWLEDGMENT ii
DECLARATION iii
TABLE OF CONTENTS iv
LIST OF FIGURES vi
1 INTRODUCTION 1-3

2 HARDWARE AND SOFTWARE REQUIREMENTS 4-5


2.1 Hardware components 4
2.1.1 Arduino UNO 4
2.1.2 LCD
2.2 Software components 5
2.2.1 Arduino IDE Software 6

3 METHODOLOGY 5-9
3.1 Hardware Description 5

4 SOFTWARE DESCRIPTION 9-12


4.1 Source Code 9
4.2 Circuit Diagram 10

5 RESULT AND DISCUSSION 13


5.1 Snap Shot of the Project 13
5.2 Result 13
6 CONCLUSION 14
REFERENCES 15

LIST OF FIGURES

Fig. No. Name of the Figure Page No

2.1 IGBT Brick 05

3.1 Arduino Board 06

3.2 Relay Switch 07

3.3 ULN2803 08

3.4 Ribbon Cable 08

3.5 Bicolor LED 09

4.1 Block Diagram 09

4.2 Relay Circuit 11

4.3 Relay Switch to IGBT Connector Circuit 11

4.4 LED to Ribbon Cable Connector Circuit 12

5.1 Breadboard Implementation of Proposed Design 13

5.2 PCB Implementation of Design 13

You might also like