Data Sheet

Shut-off valve
Type SVA-S SS and SVA-L SS

Designed for highly demanding production environments,

where corrosion is a risk

In certain specific areas such as outdoor

applications and corrosive atmospheres, such
as coastal installations, there is a need for high
surface protection to prevent failure due to
corrosion.

Today's food safety standards often call for daily

treatment with detergents to protect against
bacteria growth, again producing a need for
high surface protection.

SVA-S/L SS are angleway and straightway

stainless steel shut-off valves, which are
designed to meet all industrial refrigeration
application requirements.

The valves are designed to give favourable flow

characteristics and are easy to dismantle and
repair when necessary. The valve cone is
designed to ensure perfect closing.

AI234986440234en-000901
Shut-off valve, Type SVA-S SS and SVA-L SS

Features

• Applicable to HCFC, HFC, R717 (Ammonia), R744 (CO2) and all flammable refrigerants
• Optional accessories:
◦ Heavy duty industrial hand wheel for frequent operation
◦ Cap for infrequent operation
• Available in angleway and straightway versions with Standard neck or Long neck (DN 15 to DN 40) for insulated
systems
• Designed to give favourable flow conditions
• Internal backseating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure
• Housing is made of stainless steel approved for low temperature operations
• Easy to disassemble for inspection and service
• SVA-S/L SS shut-off valves can accept flow in either direction
• Butt-weld DIN, Butt-weld ANSI and Socket Weld connections
• Maximum allowable working pressure and temperature range:
◦ DN 15-65: 52 bar (754 psi) at -60 °C/+50 °C (-76 °F/+122 °F)
◦ DN 80-150: 50 bar (725 psi) at -60 °C/+50 °C (-76 °F/+122 °F) For SVA-S/L SS see the relation between PS and
temperature in the curve on Figure 1 page 4
• Temperature range: -60 °C/+150 °C (-76 °F +302 °F)
• Compact and light valves for easy handling and installation
• Classification: DNV, CRN, BV, EAC etc. To get an updated list of certification on the products please contact your
local Danfoss Sales Company

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 2

Shut-off valve, Type SVA-S SS and SVA-L SS

Media

Refrigerants
Applicable to HCFC, HFC, R717 (Ammonia), R744 (CO2) and all flammable refrigerants. For further information please
contact your local Danfoss Sales Company.

New refrigerants
Danfoss products are continually evaluated for use with new refrigerants depending on market requirements.

When a refrigerant is approved for use by Danfoss, it is added to the relevant portfolio, and the R number of the
refrigerant (e.g. R513A) will be added to the technical data of the code number. Therefore, products for specific
refrigerants are best checked at store.danfoss.com/en/, or by contacting your local Danfoss representative.

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 3

Shut-off valve, Type SVA-S SS and SVA-L SS

Product specification

Pressure and temperature data

Figure 1: Pressure and temperature range
psi bar SVA-S/L SS DN 15 - DN 65
798 55
725 50 SVA-S SS DN 80 - DN 150
653 45
580 40
508 35
Pressure

435 30
363 25
290 20
218 15
145 10
73 5
0 0
-70 -50 -30 -10 10 30 50 70 90 110 130 150 ˚C
-94 -58 -22 14 50 86 122 158 194 230 266 302 ˚F
Temperature

Table 1: Pressure and temperature range

Description Values
Temperature Range -60 °C /+150 °C (-76 °F /+302 °F)
Pressure range The valves are designed for max. working pressure 52 barg (754 psig), 50 barg (725 psig) for
DN 80 - DN 150

Design
Housing
Made of stainless steel approved for low temperature operations.

Valve cone
The valve cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the
valve is opened and closed. A teflon tightening ring provides perfect sealing at a minimum closing momentum.

Spindle
Made of polished stainless steel, ideal for O-ring sealing. Furthermore, parts of the spindle are heat treated to obtain
anti-abrasive/adhesive properties.

Packing gland
The stainless steel packing gland comprises a spring loaded seal packing gland which ensures a perfect tightness in
the range: -60 °C/+150 °C (-76 °F/+302 °F). The packing glands are equipped with a scraper ring to prevent
penetration of dirt and ice into the packing gland.

Figure 2: Example of Marking Ring

ig @ –6 0 ° C
5 ps \ –7
6° /7 2
F 50
PS
–
15

/3
S S S D N8 0
0° C
\30 2 ° F

S VA-
E
LV
VA

OP
ST

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 4

Shut-off valve, Type SVA-S SS and SVA-L SS

Installation
It is recommended that the valves be installed in the direction of flow indicated by the arrow on the valve body. The
valve can be installed in the opposite direction but this slightly reduces the kv-value (Cv-value).

The valve is designed to withstand high internal pressure. However, the piping system in general should be
designed to avoid liquid traps and reduce the risk of hydraulic pressure caused by thermal expansion.

For further information refer to installation guide for SVA-S/L SS.

Connections
Available with the following connections:
• Butt-weld DIN (EN 10220)
◦ DN 15 - 125 (½ - 5 in.)
• Butt-weld ANSI (B 36.19M)
◦ DN 15 - 150 (½ - 6 in.)
• Socket Weld (ANSI B 16.11)
◦ DN 20 - DN 50 (3⁄4 - 2 in.)

Figure 3: DIN Figure 4: ANSI Figure 5: SOC

Table 2: Butt-weld DIN (EN 10220)

Size ØD T
15 mm 21.3 2.3
½ in. 0.839 0.091
20 mm 26.9 2.3
3⁄4 in 1.059 0.091
25 mm 33.7 2.6
1 in. 1.327 0.103
32 mm 42.4 2.6
11⁄4 in. 1.669 0.102
40 mm 48.3 2.6
1½ in. 1.902 0.103
50 mm 60.3 2.9
2 in. 2.37 0.11
65 mm 76.1 2.9
2½ in. 3 0.11
80 mm 88.9 3.2
3 in. 3.5 0.13
100 mm 114.3 3.6
4 in. 4.5 0.14
125 mm 139.7 4
5 in. 5.5 0.16

Table 3: Butt-weld ANSI (B 36.19M, SCHEDULE 40)

Size ØD T
15 mm 21.3 2.3
½ in. 0.839 0.091
20 mm 26.9 2.9
3⁄4 in 1.06 0.11
25 mm 33.7 3.5
1 in. 1.33 0.14

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 5

Shut-off valve, Type SVA-S SS and SVA-L SS

Size ØD T
32 mm 42.4 3.6
11⁄4 in. 1.67 0.14
40 mm 48.3 3.7
11⁄2 in. 1.9 0.15
65 mm 73 5.2
2½ in. 2.87 0.2
80 mm 88.9 5.5
3 in. 3.5 0.22
100 mm 114.3 6.0
4 in. 4.5 0.24
125 mm 141.3 6.6
5 in. 5.56 0.26
150 mm 168.3 7.1
6 in. 6.63 0.28

Table 4: Butt-weld ANSI (B 36.19M, SCHEDULE 10)

Size ØD T
50 mm 60.3 2.8
2 in. 2.37 0.11
65 mm 73 3.1
2½ in. 2.87 0.12
80 mm 88.9 3.1
3 in. 3.5 0.12
100 mm 114.3 3.1
4 in. 4.5 0.12

Table 5: Socket welding ANSI (B 16.11)

Size ID T L
20 mm 27.2 4.6 13
¾ in. 1.071 0.181 0.51
25 mm 33.9 7.2 13
1 in. 1.335 0.284 0.51
32 mm 42.7 6.1 13
11⁄4 in. 1.743 0.240 0.51
40 mm 48.8 6.6 13
1½ in. 1.921 0.260 0.51
50 mm 61.2 6.2 16
2 in. 2.41 0.24 0.63

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 6

Shut-off valve, Type SVA-S SS and SVA-L SS

Material specification
SVA-S SS 15-40 (½ - 1½ in.)
Figure 6: SVA-S SS 15-40 (½ - 1½ in.)

M148B0035_1
Danfoss
M148B0038_1
Danfoss

Table 6: Parts list and materials

No. Part Material EN ISO ASTM
GX5CrNi19-1
1 Housing Stainless steel AISI 304
EN10213-4
X5CrNi18-10
2 Bonnet, Flange Stainless steel AISI 304
EN10088
X8CrNiS18-9
3 Bonnet, Insert Stainless steel AISI 303
DIN 17440
X8CrNiS18-9 Type 17
4 Spindle Stainless steel AISI 303
DIN 17440 683/13
5 Cone Steel
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Handwheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon
20 Identification ring Stainless steel
21 Disk spring Steel

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 7

Shut-off valve, Type SVA-S SS and SVA-L SS

SVA-L SS 15 - 40 (½ - 1½ in.)
Figure 7: SVA-L SS 15 - 40 (½ - 1½ in.)

M148B0040_1
Danfoss

M148B327_02-2017
Danfoss

Table 7: Parts list and materials

No. Part Material EN ISO ASTM
GX5CrNi19-10
1 Housing Stainless steel AISI 304
EN10213-4
X5CrNi18-10
2 Bonnet, Flange Stainless steel AISI 304
EN10088
X8CrNiS18-9
3 Bonnet, Insert Stainless steel AISI 303
DIN 17440
X8CrNiS18-9 Type 17
4 Spindle Stainless steel AISI 303
DIN 17440 683/13
5 Cone Steel
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Handwheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon
20 Identification ring Stainless steel
21 Disk spring Steel

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 8

Shut-off valve, Type SVA-S SS and SVA-L SS

SVA-S SS 50-65 (2 - 2½ in.)

Figure 8: SVA-S SS 50-65 (2 - 2½ in.)

M148B0036_1
Danfoss
M148B0039_1
Danfoss

Table 8: Parts list and materials

No. Part Material EN ISO ASTM
GX5CrNi19-10
1 Housing Stainless steel AISI 304
EN10213-4
GX5CrNi19-10
3 Valve bonnet Stainless steel AISI 304
EN10213-4
X8CrNiS18-9 Type 17
4 Spindle Stainless steel AISI 303
DIN 17440 683/13
5 Cone Steel
X8CrNiS18-9 Type 17
8 Packing gland Stainless steel AISI 303
10088 683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Handwheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon
19 Locking nut Steel
20 Identification ring Stainless steel
21 Disk spring Steel

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 9

Shut-off valve, Type SVA-S SS and SVA-L SS

SVA-S SS 80 - 150 (3 - 6 in.)

Figure 9: SVA-S SS 80 - 150 (3 - 6 in.)

M148B0006_1
Danfoss

M148B0096_1
Danfoss
Table 9: Parts list and materials
No. Part Material EN ISO ASTM
GX5CrNi19-10
1 Housing Stainless steel AISI 304
EN10213-4
GX5CrNiMo19-11-2
3 Valve bonnet Stainless steel AISI 304
EN10213-4
X5CrNi18-10 Type 17
4 Spindle Stainless steel AISI 303
DIN 17440 683/13
5 Cone Cone seal Steel Teflon (PTFE)
Type 17 R
8 Packing gland Stainless steel AISI 303
683/13
9 Packing washer Aluminium
10 O-ring Cloroprene (Neoprene)
11 Spring loaded Teflon ring PTFE
12 Bolts Stainless steel A2-70 A2-70 Type 308
13 Gasket Fiber, Non-asbestos
14 Hand wheel Steel
17 Cap Aluminium
18 Gasket for cap Nylon (PA 6)
19 Soft backseat Teflon (PTFE)
20 Identification ring Stainless steel
22 Disk spring Steel

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 10

Shut-off valve, Type SVA-S SS and SVA-L SS

Dimensions and weight

SVA S SS 15 - 40 (½ - 1½ in. ) in angleway version with cap / hand wheel
Figure 10: SVA S SS 15 - 40 (½ - 1½ in. ) in angleway
version with cap / hand wheel
SVA-xx x x ANG CAP SVA-xx x x ANG H-WHEEL

Table 10: SVA S SS 15 - 40 (½ - 1½ in. )

Valve size K Cmax .1 Cmax .2 G ØD1 ØD2 ØH Weight
SVA-S SS 15-20 mm 4 178 189 45 60 38 60 1.4 kg
SVA-S SS 1⁄2 - 3⁄4" in. 0.16 7 7.44 1.77 2.36 1.5 2.36 3.1 lbs
SVA-S SS 25-40 mm 12 234 268 55 80 50 70 2.4 kg
SVA-S SS 1 - 1⁄" in. 0.47 9.21 10.55 2.17 3.15 1.97 2.76 5.3 lbs

 NOTE:
Specified weights are approximate values only.

SVA-S/L SS 15 - 40 (½ - 1½ in. ) straightway version with cap / hand wheel

Figure 11: SVA-S/L SS 15 - 40 (½ - 1½ in. ) straightway version with cap / hand wheel

SVA-xx x x STR CAP SVA-xx x x STR H-WHEEL

Table 11: SVA-S SS 15 - 40 (½ - 1½ in. )

Valve size K Cmax.1 Cmax.2 Bmax.1 Bmax.2 E G ØD1 ØD2 ØH Weight
SVA-S SS 15 - 20 mm 4 146 141 160 156 20 120 60 38 60 2.0 kg
SVA-S SS (½ - ¾) in. 0.16 5.74 5.55 6.3 6.14 0.79 4.72 2.36 1.5 2.36 4.4 lb
SVA-S SS 25 - 40 mm 12 199 208 212 222 26 155 80 50 70 3.0 kg
SVA-S SS (1 - 1½) in. 0.47 7.83 8.19 8.35 8.74 1.02 6.1 3.15 1.97 2.76 6.6 lb

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 11

Shut-off valve, Type SVA-S SS and SVA-L SS

 NOTE:
Specified weights are approximate values only.

Table 12: SVA-L SS 15 - 40 (½ - 1½ in. )

Valve size K Cmax.1 Cmax.2 Bmax.1 Bmax.2 E G ØD1 ØD2 ØH Weight
SVA-L SS 15 - 20 mm 63 188 184 202 198 20 120 60 38 60 2.0 kg
SVA-L SS (½ - ¾) in. 2.48 7.4 7.24 7.95 7.8 0.79 4.72 2.36 1.5 2.36 4.4 lb
SVA-L SS 25 - 40 mm 74 243 252 256 265 26 155 80 50 70 3.0 kg
SVA-L SS (1 - 1½) in. 2.91 9.57 9.92 10.08 10.43 1.02 6.1 3.15 1.97 2.76 6.6 lb

 NOTE:
Specified weights are approximate values only.

SVA-S SS 50 - 65 (2 - 2½ in.) in angleway version with cap / hand wheel

Figure 12: SVA-S SS 50 - 65 (2 - 2½ in.) in angleway
version with cap / hand wheel
SVA-xx x x ANG CAP SVA-xx x x ANG H-WHEEL

Table 13: SVA-S SS 50 - 65 (2 - 2½ in.)

Valve size K Cmax.1 Cmax.2 G ØD1 ØD2 ØH Weight
SVA-S SS 50 mm 70 284 315 60 100 50 77 3.2 kg
SVA-S SS (2) in. 2.76 11.18 12.4 2.36 3.94 1.97 3.03 7.1 lb
SVA-S SS 65 mm 70 310 335 70 100 50 90 4.8 kg
SVA-S SS (2½) in. 2.76 12.2 13.19 2.76 3.94 1.97 3.54 10.6 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 12

Shut-off valve, Type SVA-S SS and SVA-L SS

SVA-S SS 50 - 65 (2 - 2½ in.) in straightway version with cap / hand wheel

Figure 13: SVA-S SS 50 - 65 (2 - 2½ in.) in straightway version with cap / hand wheel
SVA-xx x x STR CAP SVA-xx x x STR H-WHEEL

Table 14: SVA-S SS 50 - 65 (2 - 2½ in.)

Valve size K Bmax.1 Bmax.2 Cmax.1 Cmax.2 E G ØD1 ØD2 ØH Weight
SVA-S SS 50 mm 70 259 259 257 257 32 148 100 50 77 4.2 kg
SVA-S SS (2) in. 2.76 10.2 10.2 10.12 10.12 1.26 5.83 3.94 1.97 3.03 9.3 lb
SVA-S SS 65 mm 70 284 280 284 280 40 176 100 50 90 6.3 kg
SVA-S SS (2½) in. 2.76 11.18 11.02 11.18 11.02 1.57 6.93 3.94 1.97 3.54 13.9 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 13

Shut-off valve, Type SVA-S SS and SVA-L SS

SVA-S SS 80 - 150 (3 - 6 in.) angleway version with cap

Figure 14: SVA-S SS 80 - 150
(3 - 6 in.) angleway version
with cap
SVA-xx x x ANG CAP

Table 15: SVA-S SS 80 - 150 (3 - 6 in.)

Valve size K Cmax.2 G ØD2 ØH Weight
SVA-S SS 80 mm 76 388 90 58 129 9.7 kg
SVA-S SS (3) in. 3 15.28 3.54 2.28 5.08 21.4 lb
SVA-S SS 100 mm 90 437 106 58 156 15.3 kg
SVA-S SS (4) in. 3.54 17.2 4.17 2.28 6.14 33.7 lb
SVA-S SS 125 mm 90 533 128 74 193 28.1 kg
SVA-S SS (5) in. 3.54 20.98 5.04 2.91 7.6 61.9 lb
SVA-S SS 150 mm 90 568 145 74 219 39.7 kg
SVA-S SS (6) in. 3.54 22.36 5.71 2.91 8.62 87.5 lb

 NOTE:
Specified weights are approximate values only.

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 14

Shut-off valve, Type SVA-S SS and SVA-L SS

SVA-S SS 80 - 100 (3 - 4 in.) straight way version with cap

Figure 15: SVA-S SS 80 - 100 (3 - 4 in.) straight way version with cap

Table 16: SVA-S SS 80 - 100 (3 - 4 in.)

Valve size K Bmax.2 Cmax.2 E G ∅D2 ∅H Weight
SVA-S SS 80 mm 76 321 322 48 216 58 129 10.9 kg
SVA-S SS (3) in. 3.00 12.64 12.72 1.89 8.50 2.28 5.08 24.0 lb
SVA-S SS 100 mm 90 367 375 60 264 58 156 18.2 kg
SVA-S SS (4) in. 3.54 14.45 14.76 2.36 10.39 2.28 6.14 40.1 lb

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 15

Shut-off valve, Type SVA-S SS and SVA-L SS

Ordering

Please note that the type codes only serve to identify the valves, some of which may not form part of the standard
product range. For further information please contact your local Danfoss Sales Company.

Table 17: Type codes

Available connections
Valve type SVA-S/L SS Shut-off valve
D A SOC
15 DN 15 (½) x x
20 DN 20 (¾) x x x
25 DN 25 (1) x x x
32 DN 32 (1¼) x x x
Nominal size in mm 40 DN 40 (1½) x x x
(valve size measured on
50 DN 50 (2) x x x
the connection diame‐
ter) 65 DN 65 (2½) x x
80 DN 80 (3) x x
100 DN 100 (4) x x
125 DN 125 (5) x x
150 DN 150 (6) x
D Butt-weld connection: DIN EN 10220
Connections A Butt-weld connection: ANSI B 36.19M
SOC Socket weld connection: ANSI B 16.11
ANG Angle flow
Valve housing
STR Straight flow
H-WHEEL Hand wheel
Other equipment
CAP Cap

 NOTE:
Where products need to be certified according to specific certification societies or where higher pressures are
required, the relevant information should be included at the time of order.

Ordering SVA-S SS
SVA-S SS Angleway
Table 18: Butt-weld DIN (EN 10220)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S SS 15 D ANG H-WHEEL 52 754 148B5289
15 ½ SVA-S SS 15 D ANG CAP 52 754 148B5290
20 ¾ SVA-S SS 20 D ANG H-WHEEL 52 754 148B5377
20 ¾ SVA-S SS 20 D ANG CAP 52 754 148B5378
25 1 SVA-S SS 25 D ANG H-WHEEL 52 754 148B5486
25 1 SVA-S SS 25 D ANG CAP 52 754 148B5487
32 1¼ SVA-S SS 32 D ANG H-WHEEL 52 754 148B5566
32 1¼ SVA-S SS 32 D ANG CAP 52 754 148B5567
40 1½ SVA-S SS 40 D ANG H-WHEEL 52 754 148B5646
40 1½ SVA-S SS 40 D ANG CAP 52 754 148B5647
50 2 SVA-S SS 50 D ANG H-WHEEL 52 754 148B5753
50 2 SVA-S SS 50 D ANG CAP 52 754 148B5754
65 2½ SVA-S SS 65 D ANG H-WHEEL 52 754 148B5847
65 2½ SVA-S SS 65 D ANG CAP 52 754 148B5848
80 3 SVA-S SS 80 D ANG CAP 50 725 148B5928
100 4 SVA-S SS 100 D ANG CAP 50 725 148B6032
125 5 SVA-S SS 125 D ANG CAP 50 725 148B6126

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 16

Shut-off valve, Type SVA-S SS and SVA-L SS

Table 19: Butt-weld ANSI (B 36.19M SCHEDULE 40)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S SS 15 A40 ANG CAP 52 754 148B5396
20 ¾ SVA-S SS 20 A40 ANG CAP 52 754 148B5395
25 1 SVA-S SS 25 A40 ANG CAP 52 754 148B6477
32 1¼ SVA-S SS 32 A40 ANG CAP 52 754 148B5595
40 1½ SVA-S SS 40 A40 ANG CAP 52 754 148B5683
65 2½ SVA-S SS 65 A40 ANG CAP 52 754 148B5854
100 4 SVA-S SS 100 A40 ANG CAP 50 725 148B4755
125 5 SVA-S SS 125 A40 ANG CAP 50 725 148B7013
150 6 SVA-S SS 150 A40 ANG CAP 50 725 148B7007

Table 20: Butt-weld ANSI (B 36.19M SCHEDULE 10)

Size MWP
Type Code number
mm in. bar psi
50 2 SVA-S SS 50 D/A10 ANG CAP 52 754 148B5754
65 2½ SVA-S SS 65 A10 ANG CAP 52 754 148B6448
80 3 SVA-S SS 80 D/A10 ANG CAP 50 725 148B5928
100 4 SVA-S SS 100 A10 ANG CAP 50 725 148B6035

Table 21: Socket weld ANSI (B 16.11)

Size MWP
Type Code number
mm in. bar psi
25 1 SVA-S SS 25 SOC ANG CAP 52 754 148B4751
50 2 SVA-S SS 50 SOC ANG CAP 52 754 148B7003

SVA-S SS Straightway
Table 22: Butt-weld DIN (EN 10220)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S SS 15 D STR H-WHEEL 52 754 148B5291
15 ½ SVA-S SS 15 D STR CAP 52 754 148B5292
20 ¾ SVA-S SS 20 D STR H-WHEEL 52 754 148B5379
20 ¾ SVA-S SS 20 D STR CAP 52 754 148B5380
25 1 SVA-S SS 25 D STR H-WHEEL 52 754 148B5488
25 1 SVA-S SS 25 D STR CAP 52 754 148B5489
32 1¼ SVA-S SS 32 D STR H-WHEEL 52 754 148B5568
32 1¼ SVA-S SS 32 D STR CAP 52 754 148B5569
40 1½ SVA-S SS 40 D STR H-WHEEL 52 754 148B5648
40 1½ SVA-S SS 40 D STR CAP 52 754 148B5649
50 2 SVA-S SS 50 D STR H-WHEEL 52 754 148B5755
50 2 SVA-S SS 50 D STR CAP 52 754 148B5756
65 2½ SVA-S SS 65 D STR H-WHEEL 52 754 148B5849
65 2½ SVA-S SS 65 D STR CAP 52 754 148B5850

Table 23: Butt-weld ANSI (B 36.19M SCHEDULE 40)

Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-S SS 15 A40 STR CAP 52 754 148B5397
20 ¾ SVA-S SS 20 A40 STR CAP 52 754 148B5398
25 1 SVA-S SS 25 A40 STR CAP 52 754 148B5399
32 1¼ SVA-S SS 32 A40 STR CAP 52 754 148B5596
40 1½ SVA-S SS 40 A40 STR CAP 52 754 148B5684
65 2½ SVA-S SS 65 A40 STR CAP 52 754 148B5855
80 3 SVA-S SS 80 A40 STR CAP 50 725 148B7005
100 4 SVA-S SS 100 A40 STR CAP 50 725 148B7006

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 17

Shut-off valve, Type SVA-S SS and SVA-L SS

Table 24: Butt-weld ANSI (B 36.19M SCHEDULE 10)

Size MWP
Type Code number
mm in. bar psi
50 2 SVA-S SS 50 D/A10 STR CAP 52 754 148B5756
65 2½ SVA-S SS 65 A10 STR CAP 52 754 148B6449

Table 25: Socket weld ANSI (B 16.11)

Size MWP
Type Code number
mm in. bar psi
20 ¾ SVA-S SS 20 SOC STR H-WHEEL 52 754 148B4750
25 1 SVA-S SS 25 SOC STR CAP 52 754 148B4752
32 1¼ SVA-S SS 32 SOC STR CAP 52 754 148B7001
40 1½ SVA-S SS 40 SOC STR H-WHEEL 52 754 148B7002
50 2 SVA-S SS 50 SOC STR CAP 52 754 148B7004

ANG = Angleway
STR = Straightway
CAP = Cap
H-WHEEL = Hand wheel

Example:
SVA-S SS 20 DIN angleway with hand wheel = 148B5377

 NOTE:
Where products need to be certified according to specific certification societies or where higher pressures are
required, the relevant information should be included at the time of order.

Ordering SVA-L SS
SVA-L SS Angleway
Table 26: Butt-weld DIN (EN 10220)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L SS 15 D ANG H-WHEEL 52 754 148B6546
15 ½ SVA-L SS 15 D ANG CAP 52 754 148B6547
20 ¾ SVA-L SS 20 D ANG H-WHEEL 52 754 148B6550
20 ¾ SVA-L SS 20 D ANG CAP 52 754 148B6551
25 1 SVA-L SS 25 D ANG H-WHEEL 52 754 148B6554
25 1 SVA-L SS 25 D ANG CAP 52 754 148B6555
32 1¼ SVA-L SS 32 D ANG H-WHEEL 52 754 148B6558
32 1¼ SVA-L SS 32 D ANG CAP 52 754 148B6559
40 1½ SVA-L SS 40 D ANG H-WHEEL 52 754 148B6562
40 1½ SVA-L SS 40 D ANG CAP 52 754 148B6563

SVA-L SS Straightway
Table 27: Butt-weld DIN (EN 10220)
Size MWP
Type Code number
mm in. bar psi
15 ½ SVA-L SS 15 D STR H-WHEEL 52 754 148B6548
15 ½ SVA-L SS 15 D STR CAP 52 754 148B6549
20 ¾ SVA-L SS 20 D STR H-WHEEL 52 754 148B6552
20 ¾ SVA-L SS 20 D STR CAP 52 754 148B6553
25 1 SVA-L SS 25 D STR H-WHEEL 52 754 148B6556
25 1 SVA-L SS 25 D STR CAP 52 754 148B6557
32 1¼ SVA-L SS 32 D STR H-WHEEL 52 754 148B6560
32 1¼ SVA-L SS 32 D STR CAP 52 754 148B6561
40 1½ SVA-L SS 40 D STR H-WHEEL 52 754 148B6564
40 1½ SVA-L SS 40 D STR CAP 52 754 148B6565

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 18

Shut-off valve, Type SVA-S SS and SVA-L SS

ANG = Angleway
STR = Straightway
CAP = Cap
H-WHEEL = Hand wheel

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 19

Shut-off valve, Type SVA-S SS and SVA-L SS

Certificates, declarations, and approvals

The list contains all certificates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.

Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.

Table 28: Valid approvals

Type File name Document type Document topic Approval authority
033F0686.AH Manufacturers Declaration PED Danfoss
033F0453.AD Manufacturers Declaration ATEX Danfoss
SVA-SS
TSSA CRN.0C16578.523467890YTN Pressure - Safety Certificate CRN TSSA
033F0691.AE Manufacturers Declaration RoHS Danfoss

Table 29: Pressure Equipment Directive (PED)

The stainless steel valves are approved and CE marked in accordance with the Pressure Equipment Directive - 97/23/EC.

Table 30: Compliance

SVA-S/L SS
Nominal bore DN≤ 25 mm (1 in.) DN32-80 mm (1¼ - 3 in.) DN 100 - 150 mm (4 - 6 in.)
Classified for Fluid group I
Category Article 4, paragraph 3 II III

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 20

 Online support

Danfoss offers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.

The Danfoss Product Store

The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certifications, accessories,
and more.
Start browsing at store.danfoss.com.

Find technical documentation

Find the technical documentation you need to get your project up and running. Get direct access to
our official collection of data sheets, certificates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.

Start searching now at www.danfoss.com/en/service-and-support/documentation.

Get local information and support

Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.

Find your local Danfoss website here: www.danfoss.com/en/choose-region.

Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specifically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.

Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.

Spare Parts
Get access to the Danfoss spare parts and service kit catalog right from your smartphone. The app
contains a wide range of components for air conditioning and refrigeration applications, such as
valves, strainers, pressure switches, and sensors.

Download the Spare Parts app for free at www.danfoss.com/en/service-and-support/downloads.

Coolselector®2 - find the best components for you HVAC/R system

Coolselector®2 makes it easy for engineers, consultants, and designers to find and order the best
components for refrigeration and air conditioning systems. Run calculations based on your operating
conditions and then choose the best setup for your system design.

Download Coolselector®2 for free at coolselector.danfoss.com.

© Danfoss | Climate Solutions | 2022.11 AI234986440234en-000901 | 21