Numeracy

Introduction to Units and Conversions

The metric system originates back to the 1700s in France. It is known as a decimal system because
conversions between units are based on powers of ten. This is quite different to the Imperial system of units
where every conversion has a unique value.

A physical quantity is an attribute or property of a substance that can be expressed in a mathematical

equation. A quantity, for example the amount of mass of a substance, is made up of a value and a unit. If a
person has a mass of 72kg: the quantity being measured is Mass, the value of the measurement is 72 and the
unit of measure is kilograms (kg). Another quantity is length (distance), for example the length of a piece of
timber is 3.15m: the quantity being measured is length, the value of the measurement is 3.15 and the unit of
measure is metres (m).

A unit of measurement refers to a particular physical quantity. A metre describes length, a kilogram
describes mass, a second describes time etc. A unit is defined and adopted by convention, in other words,
everyone agrees that the unit will be a particular quantity.

Historically, the metre was defined by the French Academy of Sciences as the length between two marks on
a platinum-iridium bar at 0°C, which was designed to represent one ten-millionth of the distance from the
Equator to the North Pole through Paris. In 1983, the metre was redefined as the distance travelled by light
1
in free space in of a second.
299 792 458

The kilogram was originally defined as the mass of 1 litre (known as 1 cubic decimetre at the time) of water
at 0°C. Now it is equal to the mass of international prototype kilogram made from platinum-iridium and
stored in an environmentally monitored safe located in the basement of the International Bureau of Weights
and Measures building in Sèvres on the outskirts of Paris.

The term SI is from “le Système international d'unités”, the International System of Units. There are 7 SI
base quantities. It is the world's most widely used system of measurement, both in everyday commerce and
in science. The system is nearly universally employed.

SI Base Units
Base quantity Name Symbol
Length metre m
Mass kilogram kg
Time second s
Electric current ampere A
Thermodynamic temperature kelvin K
Amount of substance mole mol
Luminous intensity candela cd
For other quantities, units are defined from the SI base units. Examples are given below.

SI derived units (selected examples)

 Quantity Name Symbol
Area square metre m 2

Volume cubic metre m3

Speed metre per second m/s
Acceleration metre per second squared m / sec 2

Some SI derived units have special names with SI base unit equivalents.

SI derived units (selected examples)

Quantity Name Symbol SI base unit
equivalent
Force Newton N m kg / sec 2
Pressure Pascal Pa N / m2
Work, Energy Joule J Nm
Power Watt W J /s
Electric Charge Coulomb C As
Electric Potential Volt V W/A
Difference
Celsius (temperature) degree Celsius °C K
Frequency Hertz Hz /s
Capacity litre L (or l) dm3

If units are named after a person, then a capital letter is used for the first letter. Often, litres is written with a
capital (L) because a lowercase (l) looks like a one(1).
An important feature of the metric system is the use of prefixes to express larger and smaller values of a
quantity. For example, a large number of grams can be expressed in kilograms, and a fraction of a gram
could be expressed in milligrams.
Commonly used prefixes are listed in the table below.

Multiplication Factor
Name Symbol Word form Standard form Power of 10
peta P Quadrillion 1 000 000 000 000 000 1015
tera T Trillion 1 000 000 000 000 1012
giga G Billion 1 000 000 000 109
mega M Million 1 000 000 106
kilo k Thousand 1 000 103
hecto h Hundred 100 102
deca da Ten 10 101
deci d Tenth 0.1 10-1
centi c Hundredth 0.01 10-2
milli m Thousandth 0.001 10-3
micro µ , mc Millionth 0.000 001 10-6
nano n Billionth 0.000 000 001 10-9
pico p Trillionth 0.000 000 000 001 10-12

The use of prefixes containing multiples of 3 are the most commonly used prefixes.
Using prefixes, conversions between units can be devised.

For example:

1kg = 1000g On the left hand side the prefix is used. On the right hand side the prefix is
replaced with the multiplication factor.

1mg = 0.001g On the left hand side the prefix is used. On the right hand side the prefix is
replaced with the multiplication factor. To make the conversion friendlier to use,
multiply both sides by 1000 (Why 1000? Because milli means one thousandth and
one thousand thousandths make one whole), so 1000mg = 1g.

1Mm = 1 000 000m On the left hand side the prefix is used. On the right hand side the prefix is
replaced with the multiplication factor.

1 µ m = 0.000 001m On the left hand side the prefix is used. On the right hand side the prefix is
replaced with the multiplication factor. To make the conversion friendlier to use,
multiply both sides by 1 000 000 (Why 1 000 000? Because micro means one
millionth), so 1 000 000 µ m = 1 m
 Numeracy

Module contents
Introduction
• Conversions – traditional method
• Conversions – dimensional analysis method
• Time
Answers to activity questions
Outcomes
• To understand the necessity for units.
• To understand the metric system and the prefixes used.
• To convert units accurately using one of the methods covered.
• To change decimal time into seconds, minutes as appropriate.
• To perform operations with time.

Check your skills

This module covers the following concepts. Check your answers from the answer section at the end of the
module.

1. What are the SI units for length, mass and time?

What is difference between the prefix m and M?
What is the difference between volume and capacity?

2. Using the traditional method of unit conversions, perform the following:

(a) 495mm to m (b) 1.395kg to g (c) 58g to kg
2
(d) 0.06km to mm (e) 25 000m to ha (f) 3.5m3 to L

3. Using the dimensional analysis method of unit conversions, perform the following:
(a) 495mm to m (b) 1.395kg to g (c) 58g to kg
(d) 0.06km to mm (e) 25 000m2 to ha (f) 3.5m3 to L

4. (a) What is 1440 in am/pm time?

(b) If I leave at 2.47pm and travel for one and three quarter hours, what time do I arrive?
(c) Change 3.15hours into hours and minutes.
 Numeracy

Topic 1: Conversions – traditional method

The base metric unit for mass is the gram. Mass is the correct term for what is commonly called weight. On
Earth, there is no difference in the value of mass and weight.

Unit conversions for mass units are in the table below.

Conversions based on Conversions derived from

prefixes those in the left column
1000 000 µ g = 1g 1000 µ g = 1mg In nursing, microg is used to
represent micrograms.
1000mg = 1g 1000mg = 1g
1000 g = 1kg 1000 g = 1kg
1000 000 g = 1Mg 1000=
kg 1=
Mg 1t A megagram is commonly
called a tonne (t)

Let’s consider the example, change 4500g to kg.

When changing from a smaller unit (g) to a larger unit (kg), a smaller value will be the result. The
conversion involves grams and kilograms, so the conversion required is 1000g = 1kg .
Look at this conversion, it is written with given units (grams) on the left and the new units (kilograms) on
the right. Given units on New units on
the left the right

1000 g = 1kg

The conversion went from 1000 on the left to 1 on the right. To go from 1000 to 1, dividing by 1000 is
required. In this question, dividing by 1000 must also take place. 4500 divided by 1000 requires the moving
of the decimal point by three places in a direction to make the number smaller, so the answer is 4.5
4500 g ÷ 1000 =
4.5kg

When all the conversions are considered, they can be summarised in the table below.

x 1000 x 1000 x 1000 x 1000

microgram milligram gram kilogram megagram (tonne)

÷ 1000 ÷ 1000 ÷ 1000 ÷ 1000

Change 3.25t to kg.

When changing from a larger unit (g) to a smaller unit (kg), a larger value will be the result. The conversion
involves tonnes and kilograms, so the conversion required is 1000kg = 1t .

Look at this conversion, is it written with existing units (tonnes) on the left and new units (kilograms) on the
right? The answer to this is ‘no’ so change the order of the equation to be:

1t = 1000kg .

The conversion went from 1 on the left to 1000 on the right. To go from 1 to 1000 multiplying by 1000 is
required. In the question, multiplying by 1000 must also take place. 3.25 multiplied by 1000 requires the
moving of the decimal point by three places in a direction to make the number larger, so the answer is 3 250
3.25t × 1000 =3250kg

Change 1.42kg to mg.

There is no conversion to change from kg to mg. To achieve this, two conversions are required, they are, kg
to g and then g to mg.

1.42 kg to gram uses the conversion 1000 g = 1kg which has to be changed to 1kg = 1000 g . To change from
kg to grams, multiplying by 1000 is required.

1.42kg × 1000 =
1420 g

Changing 1420g to mg uses the conversion 1000mg = 1g which has to be changed to 1g = 1000mg . To
change from g to mg, multiplying by 1000 is required. 1420 g × 1000 =
1420000mg ;

overall 1.42kg = 1420000mg .

x 1000 x 1000 x 1000 x 1000

microgram milligram gram kilogram megagram (tonne)

÷ 1000 ÷ 1000 ÷ 1000 ÷ 1000

Change 455 μgrams (micrograms) to mg.

Using the table above, the conversion from micrograms to milligrams requires dividing by 1000.

455µ g ÷ 1000 =
0.455mg

Change 1.2g to mg.

Using the table above, the conversion from grams to milligrams requires multiplying by 1000.

1.2 g × 1000 = 1200mg

The base metric unit for length is the metre. Length is the same as distance. For most quantities,
conversions are usually based on 1000. Length is similar but the unit centimetre is included. Centimetres
are used because everyday measurements in centimetres are in the familiar number region 1- 100.

Unit conversions for length units are in the table below.

 Conversions based on Conversions derived from
prefixes those in the left column
1000 000 µ m = 1m 1000 µ m = 1mm Microscope measurements
use micrometres (or
microns). Red blood cells
are about 8 microns in
diameter, a human hair
about 100 microns.
1000mm = 1m 1000mm = 1m
100cm = 1m 10mm = 1cm
100cm = 1m It is very unusual to use a
centi-unit.
1000m = 1km 1000m = 1km
1000 000m = 1Mm 1000km = 1Mm The unit megametres is not
generally used in everyday
use.

Let’s consider the example, change 7900m to km.

When changing from a smaller unit (g) to a larger unit (kg), a smaller value will be the result. The
conversion involves metres and kilometres, so the conversion required is 1000m = 1km .

Look at this conversion, is it written with existing units (metres) on the left and new units (kilometres) on
the right? The answer to this is ‘yes’ so no changing of the conversion is required.

The conversion went from 1000 on the left to 1 on the right. To go from 1000 to 1 dividing by 1000 took
place. In the question, dividing by 1000 must also take place. 7900 divided by 1000 requires the moving of
the decimal point by three places in a direction to make the number smaller, so the answer is 7.9
7900m ÷ 1000 = 7.9km

When all the conversions are considered, they can be summarised in the table below.

x 1000 x 1000 x 1000 x 1000

x 10 x 100
micrometre millimetre centimetre metre kilometre megametre
÷ 10 ÷ 100

÷ 1000 ÷ 1000 ÷ 1000

÷ 1000

Change 0.532km to cm

There is no conversion to change from km to cm. To achieve this, two conversions are required, they are,
km to m and then m to cm.

0.532 km to metres uses the conversion multiplying by 1000. (Based on the table above)

0.532km ×1000 =
532m

Changing 532m to cm uses the conversion multiplying by 100.(Based on the conversion above)
 532m ×100 = 53200cm ,
overall 0.532km = 53200cm .

The base metric unit for capacity is Litres. Capacity is how much a container can hold or is holding with
particular reference to fluid. Closely related to this is the concept of volume which is the amount of space
within a container.

Unit conversions for capacity units are in the table below.

Conversions based on Conversions derived from

prefixes those in the left column
1000mL = 1L 1000mL = 1L
1000 L = 1kL 1000 L = 1kL
1000 000 L = 1ML 1000kL = 1ML The unit Megalitre is used to
describe the capacity of
dams or other water
storages.

Let’s consider the example, change 10350L to kL.

When changing from a smaller unit (L) to a larger unit (kL), a smaller value will be the result. The
conversion involves metres and kilometres, so the conversion required is 1000 L = 1kL .

Look at this conversion, is it written with existing units (L) on the left and new units (kL) on the right? The
answer to this is ‘yes’ so no changing of the conversion is required.

The conversion went from 1000 on the left to 1 on the right. To go from 1000 to 1 dividing by 1000 took
place. In the question, dividing by 1000 must also take place. 10350 divided by 1000 requires the moving of
the decimal point by three places in a direction to make the number smaller, so the answer is 10.35L
10350 L ÷ 1000 = 10.35kL

x 1000 x 1000 x 1000

millilitre litre kilolitre

megalitre ÷ 1000
÷ 1000 ÷ 1000

Consider 3kL to mL

There is no conversion to change from kL to mL. To achieve this, two conversions are required, they are, kL
to L and then L to kL.

3 kL to metres uses the conversion multiplying by 1000.

3kL × 1000 =
3000 L

Changing 3000L to mL uses the conversion multiplying by 1000.

3000 L ×1000 =
3000 000mL ,
 overall 3kL = 3000 000mL .

The base unit for area is square metres m 2 . A square metre is a square with side length 1 metre. A square
centimetre is a square with side length 1 centimetre. Conversions are required the change between square
centimetres, square metres, hectares and square kilometres.

Area unit conversions can be derived from length unit conversions. Using the length conversion 100cm = 1m ,
the area unit conversions can be obtained by squaring everything in the conversion;
(100cm =
1m ) =
1002 cm 2 =→ 10 000 cm 2 =
2
12 m 2 1 m2

Similarly, using the length conversion 1000m = 1km , the area unit conversions can be obtained by squaring
everything in the conversion;
(1000m =
1km ) =
10002 m 2 =
12 km 2 → 1000 000 m 2 =
2
1 km 2

Hectares are a unit of area that is in between a square metre and a square kilometre.

Area = 100m  100m Hectares are just hectares, they

100 m A hectare is based on a square are not called square hectares,
= 10 000m
2
with side length 100m although technically a hectare
(hectometre). is another name for a square
hectometre!
100 m

Unit conversions for area units are in the diagram below.

x 10 000 x 10 000 x 100

Square centimetres square metres hectares square kilometres

÷ 10 000 ÷ 10 000 ÷ 100

2
Change 45000m to ha

The conversion involves square metres and hectares, so the conversion required is 10 000m 2 = 1ha

Look at this conversion, is it written with existing units (square metres) on the left and new units (ha) on the
right? The answer to this is ‘yes’ so no changing of the conversion is required.
The conversion went from 10 000 on the left to 1 on the right. To go from 10 000 to 1, dividing by 10 000
took place. In the question, dividing by 10 000 must also take place. 45 000 divided by 10 000 requires the
moving of the decimal point by four places in a direction to make the number smaller, so the answer is 4.5
ha.

45000m 2 ÷ 10000 =
4.5ha
 3
The base unit for volume is cubic metres m . A cubic metre is a cube with side length 1 metre. A cubic
centimetre is a cube with side length 1 centimetre. Conversions are required the change between cubic
centimetres, cubic metres, and cubic kilometres.

Volume unit conversions can be derived from length unit conversions.

Using the length conversion 100cm = 1m , the volume units can be obtained by cubing everything in the
conversion, (100cm =
1m ) → 1003 cm3 =
13 m3 → 1000 000 cm3 =
3
1 m3

Using the length conversion 1000m = 1km , the volume units can be obtained by cubing everything in the
conversion, (1000m =
1km ) → 10003 m3 =
13 km3 → 1000 000 000 m3 =
3
1 km3

Unit conversions for volume units are in the table below.

x 1000 000 x 1000 000 000

000
Cubic centimetres cubic metres cubic kilometres
÷ 1000 000 ÷ 1000 000 000

3 3
Change 3.15m to cm

The conversion involves cubic metres and cubic centimetres, so the conversion required is
1000 000cm3 = 1 m3 which can also written as 1 m3 = 1000 000cm3

3.15m3 × 1000000 =
3 150 000cm3

Because the concepts of capacity and volume are essentially the same, their units can be related.

The capacity unit mL is equivalent to the volume unit cm3 . 1mL = 1cm3

The capacity unit kL is equivalent to the volume unit m3 . 1kL = 1m3

Example: What is the capacity of the container below:

 Volume =l × w × h
= 30 × 15 × 10
10 cm = 4500 cm3
As 1cm
3
= 1mL , the capacity of the
15 cm shape is 4500mL or 4.5 L .
30 cm
Activity
1. Choose a unit that would be suitable to measure
(a) The length of the Bruxner Highway
(b) The floor area of a house
(c) The mass of a newly born chicken
(d) The volume of water in a water storage dam supplying a city.
(e) The length of wood-screws

2. Change the following length measurements to the units shown in brackets

(a) 3.6m (cm) (b) 4500m (km)
(c) 55m (km) (d) 0.325km (mm)
(e) 4 550 000 mm (km) (f) 5.2 cm (km)

3. Change the following mass measurements to the units shown in brackets

(a) 8550 kg (t) (b) 0.52g (mg)
(c) 9.1mg (mcg or μg) (d) 1.25 g (kg)
(e) 2 905 mg (kg) (f) 35mg (g)

4. Change the following capacity measurements to the units shown in brackets

(a) 8500mL (L) (b) 0.451kL (L)
(c) 85.9L (kL) (d) 1.6 ML (L)
(e) 75L (kL) (f) 0.000 6kL (L)

5. Change the following area measurements to the units shown in brackets

(a) 25 000m2 (ha) (b) 0.595km2 (m2)
(c) 26cm2 (m2) (d) 31.8ha (km2)
(e) 450 000m2 (ha and km2) (f) 575 212cm2 (m2)

6. Change the following volume measurements to the units shown in brackets

(a) 356 000cm3 (m3) (b) 2.575 m3 (cm3)
(c) 0.000 4 km3 (m3) (d) 375 cm3 (m3)

7. Change the following volume units to the capacity units shown in brackets
(a) 345 cm3 (mL) (b) 0.072 m3 (L)
3
(c) 5.5m (L) (d) 67 500 cm3 (kL)
 Numeracy

Topic 2: Conversions – dimensional analysis method

This method of converting units is used in science and engineering. This method is an effective way
converting units using the established conversions.

Example: 3.5m to mm.

The conversion 1m = 1000mm is changed into a fraction. There are two possibilities for the fraction, either
1000mm 1m
or . The correct choice is the fraction in which the existing unit will cancel out to
1m 1000mm
leave the new unit.

1000mm
The correct choice is 3.5m × because the existing unit (m) cancels out to leave the new unit mm.
1m
1000mm
3.5m ×
1m
1000mm
= 3.5 m ×
1m
= 3.5 × 1000 mm
= 3500mm

Example: 3.6m to km.

1km
The conversion 1000m = 1km is changed into a fraction. The fraction will be so the metres will
1000m
cancel out leaving just the units km.

1km
3.6 m ×
1000 m
3.6
= km
1000
= 0.0036km
Example: 40500L to kL.
1kL
The conversion 1000 L = 1kL is changed into a fraction. The fraction well be so the litres will
1000 L
cancel out leaving just the units kL.

1kL
40500 L ×
1000 L
40500
= kL
1000
= 40.5kL

Example: 0.000856kg to mg.

This requires 2 conversions, 1000 g = 1kg and 1000mg = 1g . The conversion can be done in two stages or
combined into one,

1000 g 1000mg
0.000856 kg × 0.856 g ×
1 kg 1g
= 0.000856 × 1000 g then = 0.856 × 1000mg
= 0.856 g = 856mg

Alternatively, combined like below:

1000 g 1000mg
0.000856 kg × ×
1 kg g
= 0.000856 × 1000 × 1000mg
= 856 g

Example: 975cm to km.

Using the conversions 100cm = 1m and 1000m = 1km , the two conversions can be combined like below:

1m 1km
975 cm × ×
100 cm 1000 m
975
= km
100 × 1000
= 0.00975km
Example: 2474m2 to ha.

Using the conversion 10000m = 1ha , the conversion can take place as;
2

1ha
2474 m 2 ×
10000 m 2
2474
= ha
10000
= 0.2474ha

Rate units can also be changed using this method.

Example: 60 km/hr to m/sec.

The conversions required are 1000m = 1km and 3600sec = 1hr . It is advisable to write
60km
60 km / hr as
1hr

60 km 1000m 1 hr
× ×
1 hr 1 km 3600sec
60 × 1000
= m / sec
3600
= 16.67 m / sec(to 2 d.p.)

Example: 30 L/hr to mL/min.

The conversions required are 1000mL = 1L and 60min = 1hr .

30 L 1000mL 1 hr
× ×
1 hr 1L 60min
30 × 1000
= mL / min
60
= 500 mL / min

Conversion between Imperial units and metric units can also be done this way if the conversion is known.
Example: 3.75in to cm, using the conversion 1in = 2.54cm (the abbreviation in is an abbreviation for
inches)

The conversion required is 1in = 2.54cm .

2.54cm
3.75 in ×
1 in
= 3.75 × 2.54cm
= 9.525cm
Example: 200cm2 to in2.

The conversion 1in = 2.54cm is known, however the conversion required must be obtained by squaring the
conversion.
12 in 2 = 2.542 cm 2
1in 2 = 6.4516cm 2
The conversion is:
1in 2
200 cm 2 ×
6.4516 cm 2
200
= in 2
6.4516
≈ 31in 2
The conversion below is very unusual and requires careful thinking. In the imperial system, the fuel mileage
of cars was measured in miles per gallon (mpg). In the metric system, the emphasis is really on fuel
consumption so the units chosen were litres per 100km (L/100km).

Example: 35mpg to L/100km

Two conversions are required here: 1mile = 1.61 km and 1 imperial gallon = 4.55 litres (there are many
definitions of a gallon; we are using the imperial gallon which was used in Australia prior to changing to the
metric system)

Because the new rate is volume of fuel per distance, let’s think of 35mpg as being it takes 1 gallon to cover a
distance of 35 miles.
1 gallon 4.55litres 1 mile
× ×
35 miles 1 gallon 1.61km
= 4.55 ÷ (35 × 1.61)litre / km
= 0.08075litre / km
To make the unit user friendly, the answer is multiplied by 100 so the figure is per 100km.
0.08075litres / km
= 8.075litres / 100km
Activity

1. Change the following measurements using the dimensional analysis method to the
units shown in brackets
(a) 3.55m (cm) (b) 6510g (kg)
(c) 55cm (m) (d) 1.36 kg (mg)
2 2
(e) 4 550 mm (cm ) (f) 5.2 L (mL)
(g) 11.4 mg (g) (h) 305 000cm3 (m3)
(i) 8 550 g (t) (j) 240 000m2 (ha)
(k) 9.352L (mL) (l) 21.8ha (m2)
(m) 2 905 μg (g) (n) 15 305mg (kg)

2. Change the following metric rates to the rate shown in brackets

(a) 850mL/hr (L/hr) (b) 4.51L/min (L/hr)
(c) 85.9km/hr (m/min) (d) 1.6 m2/hr (cm2/sec)
(e) 75 mg/min (g/hr) (f) 0.000 6 cm3/sec (L/hr)

3. Change the following metric and imperial units to the units shown, given the
conversion.
(a) Change 25 ha to acres given that 1 hectare is 2.48 acres
(b) Change 100 cm to inches given that 1 inch is 2.54 cm
(c) Change 50 lbs (pounds weight) to kg given that 1 kg is 2.2 lbs
(d) Change 100 miles to km given that 1 mile is 1.61 km
(e) Change 36.5 oz (ounces weight) to g given that 1 oz is 28.35g
(f) Change 100 metres to yards (yd) given that 1 m is 1.09yd
(g) Change 308cubic inches (in3) to cm3 given that 1 in is 2.54 cm

4. Change the following rates to the new rate using both imperial and metric units,
given the conversion.
(a) Change 3.45 mi/hr to km/hr given that 1 mile is 1.61 km
(b) Change 50.9 m2/hr to yd2/hr given that 1 m is 1.09yd
(c) Change 6.45 gal/hr to L/min given that 1 imp. gallon is 4.55 litres
(d) Change 3.45 ft2/hr to cm2/sec given that 1 ft (foot) is 30.48 cm
 Numeracy

Topic 3: Time
Time units cause problems because conversions are not based on powers of tens, or in other words, time is
not a decimal system.

Units of time include secs, min, hours, days, weeks, etc. Stopwatches will work in smaller units, usually
mins, secs and hundredths of seconds (or centiseconds). A stopwatch reading of 20:31:90 means 20 minutes,
31seconds and 90 hundredths of a second. Notice that a colon (:) is used to separate the different units to
avoid confusion with decimal points.

Metric prefixes can be used with seconds. The most common prefixes are milliseconds, microseconds,
nanoseconds and possibly picoseconds, the prefixes having the same meaning as in the introduction
material.

1 millisecond = 10−3second
1 microsecond = 10−6second
1 nanosecond = 10−9second
1 picosecond = 10−12second

The unit conversions for time are:

60 seconds = 1 minute
60 minutes = 1 hour
24 hours = 1 day
7 days = 1 week

There are other generalisations that have limited or no use as conversions for the purposes of calculations.

In a non-leap year this is true, but a leap year is 366 days. The
generalisation that a leap year is every fourth year, the year
365 days = 1 year
being a multiple of 4, this is not quite true, the year 2100,
2200, 2300 will not be a leap year!

This is incorrect as there is 52 weeks and 1 or 2 days in a year

52 weeks = 1 year (depending on if it is a leap year), however, this conversion is
used to approximate figures.
 This is very incorrect as there is usually 4 weeks and 2 or 3
days in a month. If you want to convert a weekly figure to a
monthly figure, it is more correct to multiply by 52 weeks and
4 weeks = 1 month then divide by 12.
For example:
A weekly repayment of $128 is equivalent to a monthly
repayment of $128 x 52 ÷ 12 = $554.67

While this is true, the length of the months is uneven, so

February is 3 days shorter than January. However, monthly
12 months = 1year
loan repayments are usually the same regardless of the length
of the month.

Unit conversions involving time

Example: Change 180 minutes to hours.

The conversion to be used is 60 minutes = 1 hour.

In the traditional method, the conversion is In the dimensional analysis method,

the right way round so to go from mins to 1 hour
hours, dividing by 60 must occur. 180 mins ×
60 mins
180
180mins ÷ 60 = 3 hours = hours
60
= 3 hours

Example: Change 252 minutes to hours (and hours and mins)

The conversion to be used is 60 minutes = 1 hour.

In the traditional method, the conversion is In the dimensional analysis method,

the right way round so to go from mins to 1 hour
hours, dividing by 60 must occur. 252 mins ×
60 mins
252
252 mins ÷ 60 = 4.2 hours = hours
60
To change this to hours and minutes, the
= 4.2 hours
decimal part of the hour is multiplied by 60.
0.2 x 60 = 12 To change this to hours and minutes, the
decimal part of the hour is multiplied by 60.
0.2 x 60 = 12
252 minutes = 4.2 hours = 4 hours 12
minutes
252 minutes = 4.2 hours = 4 hours 12
minutes
Example: Change 2 mins 41 seconds to seconds.

The conversion to be used is 60 seconds = 1 minute. Note: 2 mins 41 seconds cannot be written as 2.41
mins. As part of the question already contains seconds, only the 2 minutes needs changing to seconds. The
best method is to convert 2 mins to seconds and then add on the 41 seconds. 2 mins is 2 x 60 seconds + 41
seconds gives 161 seconds.

Example: Change 2.45 hours into minutes.

Because this time is just hours, the normal conversion strategies can be used.

The conversion to be used is 60 minutes = 1 hour which is changed around to be 1 hour = 60 minutes.

In the traditional method, to go from mins to In the dimensional analysis method,

hours, multiplying by 60 must occur.
60 mins
2.45 hours ×
1 hour
2.45 hours x 60 = 147 minutes
= 2.45 × 60 mins
= 147 mins

Example: If a car is moving at a speed of 60km/hr, how long will it take (in hours and mins) to cover 75
km?

distance
speed=
time
75km
60km/hr=
t hrs
60km/hr × t hrs=75km
75km
t=
60km/hr
t = 1.25hr
This means 1 hour and 0.25 of an hour. It is not 25 mins. To change this into hours and minutes,

Think
0.25 of an hour
= 0.25 of 60 minutes
= 15 minutes

The car will take 1 hour and 15 mins to cover 75 km.

24 hour time
Twenty four hour time is commonly used around the world in situations where confusion could arise due to
omitting am or pm from a time. Some countries have adopted 24 hour time as the standard way to express
time. The time using 24 hour time is the elapsed time from the beginning of the day, that is, midnight. At
7.30am, the elapsed time from the beginning of the day is 7 hours 30 mins, so in 24 hour time the time is
written as 0730. It is conventional to write 24 hour time using 4 digits.

The 24 hour time at midnight is 0000 as no time has elapsed since the beginning of the day.

The 24 hour time at midday is 1200 as 12 hours has elapsed since the beginning of the day.

The 24 hour time at 3:21pm is 1521 as 15hrs and 21 minutes has elapsed since the beginning of the day.

Operations with time

The examples below demonstrate how operations involving time can occur.

Example: John travelled for 3hrs 41 mins before lunch and another 2 hours 27 mins after lunch, how long
did he travel for?

This requires addition of the time periods.

Hours Mins
3 41
+ 2 27
5 68

As 68 minutes exceeds 60, it can be changed to 1 hour

8 mins giving the answer
6hrs 8 mins

Example: A nurse commenced an IV at 7:58pm. It should take 4 hrs 20 mins for the medication to be
infused. At what time will it be finished?
Hours Mins
7 58
+ 4 20
11 78

As 78 minutes exceeds 60, it can be changed to 1 hour

18 mins giving the answer 12:18am the next day
Example: A nurse gives a patient a painkiller at 8:32am. At 2.12pm the patient complains that the pain has
return and the nurse administers another painkiller to the patient. How long did the original painkiller last?

This calculation is made easier if both times are expressed in 24 hr time. The two times become 0832 and
1412.

Hours Mins
14 12 12 minutes take 32 minutes cannot be done, so
borrow an hour and payback as 60 minutes
- 8 32
The question becomes
13 72
- 8 32
5 40

Example: Seven painters complete a job in 4 hrs 16 minutes, how long was spent completing the job?
Hours Mins
4 16
x 7
28 112

As 112 minutes exceeds 60, it can be changed to 1 hour

52 mins giving a total of 29 hrs 52 mins.

Example: A teacher takes lessons of 2 hour duration. There are 17 students in the group. How much time
(on average) does the teacher spend with each student?

The first step is to change the large unit of time, hours, into a smaller unit, minutes, to make the division
easier to perform. Changing 2 hours to minutes gives 2 x 60 = 120 minutes. The time per student is then 120
÷ 17 = 7.058823529 minutes using a calculator.

This answer would be best expressed in minutes and seconds. The 0.058823529 of a minute becomes
0.058823529 of 60 seconds which is 3.5294… which rounds to 4 seconds. The answer is each student will
receive approximately 7 minutes 4 seconds of time from the teacher.
Activity

1. (a) Change 420 minutes to hours

(b) Change 330 minutes to hours and minutes.
(c) Change 215 minutes to hours and minutes.
(d) Change 191 seconds to minutes (as a decimal).
(e) Change 54 hours to days and hours.
(f) Change 324 mins to hrs (as a decimal)

2. (a) Change 2 hours 12 minutes to minutes.

(b) Change 4.3 hours to hours and minutes.
(c) Change 4.3 hours to minutes.
(d) Change 5 hours 38 minutes to hours.
(e) Change 3 hours 47 minutes to minutes.
(f) Change 2.68 hours to hours and minutes.

3. Change these am/pm times to 24 hour times

(a) Midnight (b) 7:31am
(c) Midday (d) 7.31pm

4. Change these 24 hour times to am/pm times

(a) 0047 (b) 0931
(c) 1550 (d) 2300

5. A train leaves at 1227 and arrives at its destination at 2309. How long did the
journey take?

6. Three drivers recorded their times to travel to the same holiday destination. The
times were 5 hrs 11 mins, 5 hrs 52 mins and 6 hrs 9 mins. What was the average
driving time?

7. A car travelling at an average speed of 85 km/hr takes how long to cover

400km?

8. Students at a local school attend six, fifty minute lessons each day. How long
have they spent in class over a 5 day school week.

9. A family needs to travel 575 km to reach their holiday destination. If they leave
at 6.45am and travel at an average speed of 85 km/hr, what time will they arrive
at their destination?

10. A cyclist left home at 5.45 am and arrived at her destination 42 km away at 7:12
am. What was her average speed?