01/13

PART NO. DESCRIPTION CONTROL PANEL COMPATIBILITY POWERED FROM DETECTOR REQUIRED PARK CLIP .
TO OPERATE COLOUR
577.001.035 601SB CONVENTIONAL SOUNDER BASE CONVENTIONAL ONLY 24Vdc NO GREEN
577.001.037 601SBD CONVENTIONAL DIODE SOUNDER BASE CONVENTIONAL ONLY 24Vdc NO GREEN
516.800.911 901SB UNIVERSAL SOUNDER BASE MINERVA ADDRESSABLE/MX 24Vdc YES BLUE
516.800.912 912SB UNIVERSAL UL SOUNDER BASE MINERVA ADDRESSABLE/MX 24Vdc YES BLUE
577.001.036 602SB 2 WIRE LINE POWERED SOUNDER BASE MZX-c ONLY DETECTION CIRCUIT NO YELLOW
577.001.038 602SBD 2 WIRE LINE POWERED DIODE SOUNDER BASE MZX-c ONLY DETECTION CIRCUIT NO YELLOW
516.800.910 802SB MX LOW POWERED SOUNDER BASE MX ONLY LOOP YES WHITE
516.800.913 812SB LOOP POWERED UL SOUNDER BASE MX ONLY LOOP YES WHITE
FIRE_Ch11_Useful_Information:Layout 1 22/01/2013 09:56 Page 1

Chapter 11 - Useful Information

PART NO. DESCRIPTION CURRENT CONSUMPTION AT CURRENT CONSUMPTION AT CURRENT CONSUMPTION AT

68 dBA (MINIMUM VOLUME) 90 dBA (MAXIMUM VOLUME) 100dBA (FIXED VOLUME)
577.001.035 601SB CONVENTIONAL SOUNDER BASE 1.2mA 6.8mA

Fire Catalogue
577.001.037 601SBD CONVENTIONAL DIODE SOUNDER BASE 1.2mA 6.8mA
MKII Sounder Base Application Table

516.800.911 901SB UNIVERSAL SOUNDER BASE 1.2mA 6.8mA

516.800.912 912SB UNIVERSAL UL SOUNDER BASE 21mA
577.001.036 602SB 2 WIRE LINE POWERED SOUNDER BASE 1.2mA 6.8mA
577.001.038 602SBD 2 WIRE LINE POWERED DIODE SOUNDER BASE 1.2mA 6.8mA
516.800.910 802SB MX LOW POWERED SOUNDER BASE 1.2mA 6.8mA
516.800.913 812SB LOOP POWERED UL SOUNDER BASE 21mA

Chapter 11 Page 1
 PART NO. DESCRIPTION FAST TEMPORAL 3 ALTERNATING 2(11) ALTERNATING 2 (9) CONTINUOUS(14) CONTINUOUS
SWEEP (2)
577.001.035 601SB CONVENTIONAL SOUNDER BASE YES YES YES YES
577.001.037 601SBD CONVENTIONAL DIODE SOUNDER BASE YES YES YES YES

Chapter 11 Page 2
516.800.911 901SB UNIVERSAL SOUNDER BASE YES YES YES YES
516.800.912 912SB UNIVERSAL UL SOUNDER BASE YES YES YES YES
577.001.036 602SB 2 WIRE LINE POWERED SOUNDER BASE YES YES YES YES
577.001.038 602SBD 2 WIRE LINE POWERED DIODE SOUNDER BASE YES YES YES YES
516.800.910 802SB MX LOW POWERED SOUNDER BASE YES YES YES YES
516.800.913 812SB LOOP POWERED UL SOUNDER BASE YES YES YES YES
FIRE_Ch11_Useful_Information:Layout 1 22/01/2013 09:56 Page 2

Chapter 11 - Useful Information

MKII Sounder Base Application Table

Fire Catalogue
PART NO. DESCRIPTION DUTCH SLOW TEMPORAL 4 SLOW SWEEP (3) MARCH TIME BEEP(25) MARCH TIME BEEP(26)
SWEEP (7)
577.001.035 601SB CONVENTIONAL SOUNDER BASE YES YES YES YES
577.001.037 601SBD CONVENTIONAL DIODE SOUNDER BASE YES YES YES YES
516.800.911 901SB UNIVERSAL SOUNDER BASE YES YES YES YES
516.800.912 912SB UNIVERSAL UL SOUNDER BASE YES YES YES , YES
577.001.036 602SB 2 WIRE LINE POWERED SOUNDER BASE YES YES YES YES
577.001.038 602SBD 2 WIRE LINE POWERED DIODE SOUNDER BASE YES YES YES YES
516.800.910 802SB MX LOW POWERED SOUNDER BASE YES YES YES YES
516.800.913 812SB LOOP POWERED UL SOUNDER BASE YES YES YES YES

(2) (3) (7) (9) (11) (14) (25) (26) = ROSHNI TONE NUMBER

01/13
 Banshee Excel Tone Table

01/13
Tone Information Banshee Excel TM Banshee Excel Lite TM
(12V) (24V) (12V) (24V)
No DIL SW Description Frequency and Timing 2nd dBA mA dBA mA dBA mA dBA mA
12345 Tone
1 00000 Banshee Buzz LF 800Hz to 950Hz swept at 120Hz 4 94 6 101 12 94 6 100 12
2 10000 Banshee Fast Sweep LF* 800Hz to 950Hz swept at 9Hz 4 94 6 101 12 94 6 100 12
3 01000 Banshee Slow Sweep LF 800Hz to 950Hz swept at 3Hz 4 94 6 101 12 94 6 100 12
4 11000 Banshee Continious LF Continious at 900Hz 4 94 6 101 12 94 6 100 12
5 00100 Banshee Fast Sweep LF (New) 830Hz to 970Hz swept at 9Hz 4 95 6 101 12 93 6 100 12
6 10100 Medium Sweep LF* 800Hz to 950Hz swept at 1Hz 7 96 6 101 12 94 6 100 12
7 01100 Continious LF Continious at 950Hz 7 96 6 102 13 94 6 100 12
8 11100 Back up Alarm LF Intermittent at 950Hz 1 sec on, 1 sec off 4 96 8 102 14 93 6 99 14
9 00010 Alternate LF Alternating 800Hz/1000Hz at 1Hz 4 94 6 100 13 94 6 100 13
10 10010 Medium Sweep LF 800Hz to 1000Hz swept at 0.5 secs 4 95 6 101 12 94 6 100 12
FIRE_Ch11_Useful_Information:Layout 1 22/01/2013 09:56 Page 3

11 01010 Alternate LF Alternating Tones 800/950 at 3Hz 4 96 6 101 12 94 6 101 12

12 11010 Banshee Buzz HF 2400Hz to 2900Hz at 120Hz 15 102 16 110 35 102 16 109 35
13 00110 Banshee Fast Sweep HF 2400Hz to 2900Hz at 9Hz 15 103 17 110 35 103 17 110 35
Chapter 11 - Useful Information

14 10110 Banshee Slow Sweep HF 2400Hz to 2900Hz at 3Hz 15 103 17 110 35 103 17 110 35
15 01110 Banshee Continious HF Continious 2900Hz* 15 103 19 110 39 103 19 109 39
16 11110 Banshee Fast Sweep HF (New) 2450Hz to 3100Hz swept at 9Hz 15 103 18 110 36 103 18 109 36
17 00001 Back up Alarm HF Intermittent at 2900Hz 1 sec on, 1 sec off 15 104 18 110 36 103 18 109 37
18 10001 Alternate HF Alternating Tones 2400/2900 at 3Hz 15 104 16 110 36 104 17 110 36
19 01001 Slow Whoop* 500Hz rising to 1200Hz over 3.5 sec, silence 0.5 sec 4 95 6 101 12 95 6 101 12
20 11001 Din Tone (DK)* 1200Hz falling to 500Hz over 1 sec, silence 10mS, repeat 4 93 5 100 10 93 5 100 12

Fire Catalogue
21 00101 French Fire Sound* 554Hz for 100mS and 440Hz for 400mS 4 90 4 96 7 90 4 96 7
22 10101 Austrailian Alert Signal 420Hz repeating 0.625 sec on, 0.625 sec off 4 89 3 95 6 89 3 94 6
23 01101 Austrialian Evacuation Signal 500Hz to 1200Hz sweeping, 3.75 secs on, 0.25 secs off 4 95 6 103 12 95 6 101 12
24 11101 US Temporal Tone LF 950Hz for 0.5 sec on. 0.5 sec off for 3 phases, silence for 1.5secs and repeat 4 95 5 101 10 93 5 99 10
25 00011 US Temporal Tone HF 2900Hz for 0.5 sec on. 0.5 sec off for 3 phases, silence for 1.5secs and repeat 15 104 13 110 26 103 13 109 27
26 10011 Swedish Tone (Fire) Intermittent 660Hz 150mS on, 150mS off 26 90 3 96 6 90 3 96 6
27 01011 Swedish Tone (All Clear) Continuous 660Hz 27 91 5 97 9 91 5 97 9
28 11011 ISO8201 LF Intermittent 970Hz 500mS on, 500mS off 28 93 5 99 10 90 5 96 10
29 00111 ISO8201 HF Intermittent 2900Hz 500mS on, 500mS off* 29 103 13 110 27 103 13 109 27
30 10111 BT Banshee (FP1063.1) Yodel 800Hz/1000Hz, 0.25sec each frequency 31 93 6 100 12 94 6 100 12
31 01111 BT Banshee (FP1063.1) Continuous 1000Hz 31 90 6 96 14 88 6 94 14
32 11111 Bell Tone Bell Tone 32 96 12 101 25 94 12 99 25

Notes:*Tones highlighted in bold are approved under the Construction Product Directive. Sound output (dBA) and current (mA) values are typical.

Chapter 11 Page 3
FIRE_Ch11_Useful_Information:Layout 1 22/01/2013 09:56 Page 4

Chapter 11 - Useful Information

Fulleon Sounder Tone Compatibility Table
Fulleon Tone Tone Number 2 Wire Symphoni 24V Symphoni Sounder Base
601SB/601SBD
602SB/602SBD

SWITCH A B SWITCH 1 2 3 4 5 SWITCH 1 2 3 4

CONTINUOUS TONE (970HZ) 14 10 10010 111X
(880Hz)
PULSED/INTERMITTENT TONE (970HZ@ 1HZ) 25 11 00111 011X
(880Hz@1Hz)EURO ONLY
ALTERNATING TONE (970HZ/800HZ@2HZ) 1 01 11111 N/A
(CLOSEST MATCH) (990HZ/650HZ@2HZ)
DUTCH SLOW WHOOP
(500Hz-1200Hz-3s on/0.5s off) 7 N/A 11001 000X
SLOW SWEEP (800Hz/970Hz@1Hz) 3 N/A 11101 010X
FAST SWEEP (800Hz/970HZ@7HZ) 2 N/A 11110 100X
TWO TONE/ALTERNATING (800HZ/970HZ@1HZ) 11 N/A 10101 110X
(660Hz/880Hz@1Hz)EURO ONLY

Fulleon Sounder Tone Table

No. TONE
1 ALT TONES 800/970 at 1/4 Hz
2 SWEEPING 800/970Hz at 7Hz
3 SWEEPING 800/970Hz at 1Hz
4 CONTINUOUS at 2850Hz
5 SWEEPING 2400-2850Hz at 7Hz
6 SWEEPING 2400-2850Hz at 1Hz
7 SLOW WHOOP
8 SWEEP 1200-500 at 1Hz
9 ALT TONES 2400/2850 2Hz
10 INT TONE OF 970Hz at 1Hz
11 ALT TONES 800/970 Hz at 1Hz
12 INT TONE at 2850 Hz at 1Hz
13 970Hz at 1/4 SEC. ON 1 SEC. OFF
14 CONTINUOUS AT 970Hz
15 554 FOR 100ms and 440Hz FOR 400ms
16 INT 660Hz 150ms ON/150ms OFF
17 INT 660Hz 1.8s ON/1.8s OFF
18 INT 660Hz 6.5s ON/13s OFF
19 CONTINUOUS 660Hz
20 ALT 554/440Hz at 1Hz
21 INT 660Hz 1Hz
22 INT 2850Hz 150ms ON 100ms OFF
23 SWEEP 800-970Hz at 50Hz
24 SWEEP 2400-2850Z at 50 Hz
25 INTERMITTENT 970Hz 500ms ON 500ms OFF
26 INTERMITTENT 2850HZ 500ms ON 500ms OFF
27 CONTINUOUS AT 4kHz
28 ALTERNATING TONES 800/970 AT 2Hz
29 ALTERNATING TONES 988/645 AT 2Hz
30 ALTERNATING 510/610 at 1Hz
31 SWEEPING 300-1200 at 1Hz
32 CONTINUOUS AT 4kHz

Chapter 11 Page 4 Fire Catalogue 01/13

FIRE_Ch11_Useful_Information:Layout 1 22/01/2013 09:56 Page 5

Chapter 11 - Useful Information

Features
• Selecting the category of protection and coverage.
• How to configure detector zones and alarm zones within
premises.
• Which type of fire detection system?
• Detector suitability.
• Detector coverage.
• Manual break glass call points.
• Limitation of false alarms.
• Means of giving warning to occupants.
• Control and indicating equipment.
• Power supplies.
• Cabling considerations.
• Communication with the fire service.
• System installation.
• Documentation.
• Standards and Specifications.
• Associated Ancillary Equipment.
• Networking and Graphics.
• Installation.
• Commissioning.
• Training.
• Maintenance.

Consultants Guide
A Fire Detection System Consultants Guide for consultants
designing systems to BS5839-1:2002.

Product Code
CGUK-01 Consultants Guide

01/13 Fire Catalogue Chapter 11 Page 5

FIRE_Ch11_Useful_Information:Layout 1 22/01/2013 09:56 Page 6

Chapter 11 - Useful Information

This page is left intentionally blank.

Chapter 11 Page 6 Fire Catalogue 01/13