Welding Procedure Qualifier (WPQ2)

Endorsement Description
Introduction
The AWS Welding Procedure Qualifier Endorsement Description provides candidates guidance
in the endorsement examination process. AWS strongly advices those who apply for the
endorsement examination to read the endorsement description, paying particular attention to
the test specifications and content area to gain better understanding. The examination
description is subject to change.

Scope of Endorsement
AWS QC1:2016-AMD1- Specification for AWS Certification of Welding Inspectors provides for
endorsements that may be added to the CWI and SCWI certifications. Endorsements are
indication of an additional knowledge, skill or ability documented in writing and added to an
individual’s certification credential(s).
This endorsement meets a portion of the requirements for SWI Alternative Qualification in AWS
B5.1 and Alternative Certification for the SCWI in QC1.
The Welding Procedure Qualifier Endorsement is a means of providing an additional credential
to CWI’s involved with the qualification of Welding Procedure Specifications.
Given the technical specifications and/or a drawing, the holder of the endorsement should be
able to utilize language from AWS D1.1/D1.1M Structural Welding Code – Steel and AWS
B2.1/B2.1M, Specification for Welding Procedure and Performance Qualification and be able to:
(1) Implement the organization’s responsibilities.
(2) Work with an engineering specification or drawing, determine which base material – filler
metal combination would be applicable for procedure qualification testing.
(3) Evaluate welding process(es) required for the application and determine the essential
variables impacting the qualification process.
(4) Determine if a Welding Procedure Specification (WPS) is required to be qualified by
testing, is suitable for prequalification, or if there are alternative WPS’s that could be
utilized.
(5) Determine the equipment needed for preparing and taking required measurements to be
recorded during welding of the test plates.
(6) Perform oversight of the welding of the weld test.
(7) Determine the final NDE requirements of the weld test.
(8) Determine the destructive mechanical testing required per the governing standard(s).
(9) Correctly prepare the test specimens from the test coupons.
(10) Perform an evaluation of the test results.
(11) Document the actual variables used during welding of the weld test and the test results
on a Procedure Qualification Record (PQR).
(12) Assist with the determination of weld test failures.
(13) Finalize the WPS.

Cert. Rev. 2022-10-04 Page 2 of 5

Endorsement Candidate Eligibility Criteria
Any CWI or SCWI who wishes to obtain a credential that documents their knowledge, skills, and
abilities to conduct welding procedure qualifications.

Initial Certification or 9-year Recertification Eligibility

For existing CWIs, successful completion of this endorsement satisfies the examination
requirements for a 9-year recertification, provided that the endorsement is taken during the
immediate 9-year period.

IMPORTANT! For new candidates to the CWI program, this examination is not an option for
initial certification. This is not a CWI Part C Codebook exam and doesn’t meet the
requirements of Clause 6.2.1 of the AWS B5.1:2013 AMD1- Specification for the Qualification
of Welding Inspectors nor follow the guidelines of Clause 7.1.

Training Requirements
This endorsement has no mandatory training requirements. Candidates are encouraged to
attend an AWS seminar or to perform self-study to become familiar with welding procedure
qualification.

Examination Requirements
Candidates who hold an AWS CWI or SCWI wishing to take this examination to add as an
endorsement to their AWS credentials shall be current in their AWS certification status.
Successful candidates must correctly answer 66% of the questions to receive this endorsement.

Test Specifications
Test Specifications are a breakdown of exam content areas along with proportion of the exam
devoted to each content area.

Percent of
Domain Questions on
Subdomain
Exam

Domain 01 0101 Assessment of Project Requirements

Planning 30%
0201 General
Domain 02 WPS
0202 Process Variables
Qualification and 40%
Testing 0203 Evaluation of Mechanical Testing
Requirements 0204 Evaluation of NDT
0205 Prepare PQR and other documents
Domain 03 0301 Establishing Ranges for Prequalified WPS
Finalization of 30%
0302 Establishing Ranges for WPS Qualified by
WPS Testing
Total 100%

Cert. Rev. 2022-10-04 Page 3 of 5

Examination Details
The open-book examination consists of 50 scorable questions and 5 unscorable questions. The
unscorable questions are pretest questions.
The examination will consist of traditional multiple-choice items.

Exam Delivery
The examination is a computer-based test (CBT) delivered at a Prometric test center.

CBT Exam Timing Information

The overall seat time allotted is 210 minutes (3.5 hours) from check-in to check-out at the test
center. The time can be used to answer questions is 180 minutes (3 hours).

Section of Testing Time in Minutes

Candidate Confirmation Page 2
Non-Disclosure Agreement (NDA) 2
Introduction & Tutorials 10
Exam Question Answering 180
Survey 15
Finish Page 1
Total Duration 210

Examination Reference
Most exam questions are directly answerable from the provided two reference documents. To
answer these questions, candidates can either answer from memory and experience, or use the
electronic copy of the document provided on the testing computer.
 AWS D1.1:2020 Structural Welding Code-Steel
 AWS B2.1/B2.1M:2021 Specification for Welding Procedure and Performance
Qualification

IMPORTANT! Printed copies of exam references are not permitted in the test location to take
the exam. The references are available in PDF at testing and word search function is not
enabled. Please note in the D1.1 reference, there are some tables and figures presented in the
landscape mode are rotated to the portrait mode at Prometric testing.

Candidates not familiar with navigating conventional PDF documents should review the
computer-based testing frequently asked questions (CBT FAQs) found HERE. Some features of
conventional PDF navigation may be disabled by Prometric for psychometric reasons.
Some exam questions may be drawn from other standards that address welding procedure
qualification and that are included in the list of Informative references for self-education.
For these questions, sufficient information to answer the question will be provided in the stem of
the question; consulting a reference standard will not be necessary.

Cert. Rev. 2022-10-04 Page 4 of 5

Endorsement Fee Structure
For candidates in the United States and Canada, exam fees are due at time of registration and
are paid directly to AWS. For the AWS exam price list, click HERE.

For international (outside of the US and Canada) candidates, exam fees are due at time of
registration and paid to the International Agent representing AWS. Agents can provide pricing
information regarding international exams.

Endorsement Credential
Endorsements earned will be updated in the AWS certification profile. Status can be checked
via the QR code on the back of the CWI wallet card or via the Quikcheck web link.

Renewal Requirements as an Endorsement

This endorsement does not have any requirement for renewal. It will automatically be renewed
at each CWI renewal or recertification. The endorsement will continue to be listed in an
approved manner.

Professional Development Hours

Candidates who successfully complete pre-exam training to prepare for the WPQ2 endorsement
examination may gain PDHs in accordance with QC1 clause 16.5.

Candidates who successfully pass the WPQ2 endorsement examination and desire to gain
PDHs should contact the AWS Certification Department.

Informative References for Self-education

The following is a list of informative reference books (latest editions) to assist those wishing to
learn and understand the best practices to conduct, develop and qualify Welding Procedure
Specifications.
1. AWS Publication, The Practical Welding Engineer
2. AWS Welding Handbook Volume 1, Ch 15
3. AWS B2.1/B2.1M Specification for Welding Procedure and Performance Qualification
4. AWS D1.1/D1.1M Structural Welding Code Steel
5. AWS D1.2/D1.2M Structural Welding Code Aluminum
6. AWS D1.4/D1.4M Structural Welding Code – Steel Reinforcing Bars
7. AASHTO/AWS D1.5M/D1.5 Bridge Welding Code
8. AWS D1.6/D1.6M Structural Welding Code – Stainless Steel
9. AWS D9.1/9.1M Sheet Metal Welding Code
10. AWS D17.1 Specification for Fusion Welding of Aerospace Applications
11. API 1104 Welding of Pipelines and Related Facilities
12. ASME Boiler and Pressure Vessel Code, Section IX: Welding, Brazing, and Fusing
Qualifications
13. ISO 5173 Destructive Tests on Welds in Metallic Materials – Bend Tests
14. ISO 15607 Specification and Qualification testing of Welding Procedures for Metallic
Materials - General Rules
15. ISO 15609 -1 Specification and Qualification Testing of Welding Procedures for Metallic
Materials - Welding Procedure
16. Welding Procedure Development for Non-Welding Engineers
(This book can be purchased online at https://weldinganswers.com/welding-procedure-
development-for-non-welding-engineers.)

Cert. Rev. 2022-10-04 Page 5 of 5