4P481234-1E

Wireless LAN Connecting Adapter

<BRP069B41> <BRP069B42>
Installation Manual
<BRP069B43> <BRP069B44>
<BRP069B45>
Wireless LAN Connecting Adapter
<BRP069B41>
Installation Manual
Homepage: app.daikineurope.com
 For details on specifications, setting methods, FAQ,
copy of the original declaration of conformity and the
latest version of this manual, see the above homepage.

 Hereby, Daikin Industries Czech Republic s.r.o. declares that the

radio equipment type BRP069B41 is in compliance with Directive
2014/53/EU and S.I. 2017/1206: Radio Equipment Regulations 2017.

Accessories
Check if the following accessories are included in your package.

BRP069B41
(A) Wireless (B) Installation
LAN connecting manual
adapter

BRP069B42
(A) Wireless (B) Installation (C) Holder (D) Wire harness (E) Cable tie with
LAN connecting manual base
adapter

English 1
Accessories
BRP069B43
(A) Wireless (B) Installation (C) Holder (D) Wire harness (E) Cable tie with
LAN connecting manual base
adapter

(F) Switch box (G) PCB

BRP069B44
(A) Wireless (B) Installation (C) Holder (D) Wire harness (E) Cable tie with
LAN connecting manual base
adapter

G) PCB

BRP069B45
(A) Wireless (B) Installation (D) Wire harness
LAN connecting manual
adapter

English 2
Safety precautions
 The English text is the original instruction. Other languages are
translations of the original instructions.
 The following describes the meanings of pictorial symbols used in this
documentation.

Give this installation manual to the customer when installation is

completed.
 To conduct a test run of the air conditioner, follow the installation
manual for the air conditioner unit.
The protection of appliances marked with this symbol is
ensured by double insulation and does not require a safety
connection to electrical earth (ground).

Prohibited Follow directions

Warning Situations which could result in

death or serious injury.

When installing:
 Request installation by your dealer or a technician.
(Can cause electric shock or fire.)
 Always use the accessories and specified parts for installation. Be
sure to follow the directions in this installation manual.
(Can cause the unit to fall, electric shock or fire.)
 Electrical work should be carried out in accordance with the
installation manual and the national electrical wiring rules or code of
practice.
 Always turn off the power supply when installing.
(Touching the electrical parts can cause an electric shock.) The main
switch of the installation is at the outdoor unit. Please switch off this
main switch to turn off the power supply.

English 3
Safety precautions
Warning Situations which could result in
death or serious injury.

When using:
 Do not disassemble, modify, or repair.
(Can cause fire, electric shock or injury.)
 Do not handle this product with wet hands.
(Can cause electric shock or fire.)
 Do not allow this product to get wet or use it when bathing
or doing similar activities with water.
(Can cause electric shock or fire.)
 Do not use this product near medical equipment or persons
using cardiac pacemakers or defibrillators. This product may
cause life-threatening electromagnetic interference.
 Do not use this product near auto-control equipment such as
automatic doors or fire alarm equipment.
(Can cause accidents due to erroneous equipment behavior.)

 Immediately disconnect the air conditioner power plug if

there is abnormal odor or sound, when it is overheating,
or smoking.
(Can cause fire or malfunction.)
 Request an inspection by your dealer.
 Disconnect the air conditioner power plug if the product
was dropped or the case is damaged.
(Can cause fire or electric shock)
 Request an inspection by your dealer.

English 4
Safety precautions
Caution Situations which could result in
damage or physical injury.

When installing:
 Do not install where flammable gas leaks can occur.
(Can cause fire.)

 Grip the connector when disconnecting the connecting

cord.
(Otherwise fire or electric shock can occur.)

When using:
 Do not use where small children can get access.
(Can cause injuries.)

 Do not use this product near a microwave oven.

(This can affect Wireless LAN communications.)

English 5
Disposal requirements
 Your product is marked with this symbol. This symbol
means that electrical and electronic products shall not be
mixed with unsorted household waste.
 Do not try to dismantle the system yourself: the dismantling
of the product and of other parts must be done by a
qualified installer in accordance with relevant local and
national legislation.
 Product and waste must be treated at a specialized trea-
tment facility for re-use, recycling and recovery.
 By ensuring correct disposal, you will help to prevent
potential negative consequences for the environment and
human health. Please contact the installer or local authority
for more information.

Main components
Wireless LAN connecting adapter
SETUP button
Use when
connecting to a
RUN lamp (orange) router (Wireless
lights when LAN access point).
connecting to
a router (Wireless
LAN access point).
MODE button
switches modes
(RUN/AP) when
AP lamp (yellow)
held down.
lights when
connected directly to
a smart phone. POWER button turns
the WLAN adapter
ON or OFF when
pressed

English 6
Main components
Basic parameters:
Frequency range: 2400 MHz–2483.5 MHz
Radio protocol: IEEE 802.11b/g/n
RF channel: 1–11
Output power: 0 dBm~18 dBm
ERP: 17 dBm (11b) / 13 dBm (11g) / 12 dBm (11n)
Power supply: DC 14 V / 100 mA

RF channel: Radio frequency channel

ERP: Effective radiated power

Applicable indoor units

For more details about installation of Wireless LAN adapter and applicable
units visit app.daikineurope.com.

English 7
Installation Installation
Work

Always turn off the power supply

when installing. (Touching the
Warning electrical parts can cause an elec-
tric shock.) The main switch of the
installation is at the outdoor unit.

1 Choosing and installation site

The WLAN adapter should be sited in a place where:
 The adapter is not in the path of direct sunlight.
 The adapter is away from the source of heat or steam.
 There is not source of machine oil vapour (this may shorten indoor
unit life).

 The adapter is at least 1 m away from any television or radio set

(unit may cause interference with the picture or sound).

 Distance between the indoor unit and the WLAN adapter is within
lenght of WLAN cable.

2 Remove the adapter case (upper).

Remove the upper case of the wireless LAN adapter.

Adapter case (upper)

Wireless LAN
connecting adapter
printed circuit board
Adapter case (lower)
English 8
Installation Installation
Work

3 Attach connecting cord to the product.

Attach the connecting cord connector (white).

 Fasten the connecting cord to the notch in the adapter case (lower).
Connect the connector to the same color.

Connector (white)

Fasten the connecting cord and ensure

that external force is not transmitted.

English 9
Installation Installation
Work

4 Return the adapter case to its original state.

Snap the top of the upper case
unto the clip at the top of the
lower case and press to close
the box.

Adapter case Adapter case

(lower) top (upper) top
portion clip portion clip

Check that the

connecting cord is
securely fastened.

Fix the upper adapter case with 2 screws located in accessory set.

English 10
Installation Installation
Work

5 Installation of Wireless LAN adapter

BRP069B41/B45
Install WLAN adapter inside the indoor unit. For more details about
installation of WLAN adapter to your model please visit
app.daikineurope.com.

BRP069B42/B43/B44
Install the WLAN adapter outside the indoor unit. There are two ways
of installation A and B.

 TYPE A
Position of the WLAN adapter on the wall/surface is fixed by screws.
In this case double face tapes located in accessory set are not
neccessary to fix the holder.
1. Fix the WLAN holder on the wall/surface with 2 screws located in
accessory set.
2. Attach the WLAN adapter to the holder by sliding into it.

For more details about installation of WLAN adapter to your model

please visit app.daikineurope.com.

Holes for screws

Holder

English 11
Installation Installation
Work

 TYPE B
Position of the WLAN adapter on the wall/surface is fixed by double
face tapes. In this case screws located in accessory set are not
neccesary to fix the holder.
1. Attach two double face tapes located in accessory set to the back
side of holder as shown below.
2. Fix the WLAN holder on the wall/surface with the double face tapes.
3. Make sure that holder is fixed to the wall/surface enough to bear the
WLAN adapter.
4. Attach the WLAN adapter to the holder by sliding into it.
NOTE
Wall/surface should be clean and degreased before attaching of the
WLAN holder by double face tapes.
For more details about installation of WLAN adapter to your model
please visit app.daikineurope.com

Double face tape

Holder

English 12
Installation Installation
Work
6 Functionality Check
Turn on the power supply and check that the [RUN] lamp of the product
blinks.

 When turning on the

power, always attach
the adapter case (top).

English 13
Configuration Connection
Settings
Section

The customer is responsible for providing the following.

□ Smartphone or tablet PC
(For minimum supported version of Android and iOS, please
check app.daikineurope.com.)
□ (Internet line and communicating device
(Modem/router or similar device)
□ Wireless LAN access point
□ [ONECTA app] (No cost)
Installation method of ONECTA app
For Android Phones For iPhones
(1) Open the [Google Play]. (1) Open the [App Store].
(2) Search for [ONECTA app]. (2) Search for [ONECTA app].
(3) Follow the directions on the (3) Follow the directions on the
screen to install. screen to install.

Refer to
app.daikineurope.com
for detailed installation instructions.

English 14
Troubleshooting
The following table provides brief descriptions of how to handle trouble or
uncertainties when you install the product or make connection settings.
Refer to the FAQ on the homepage for more details.

When this happens Explanation and where to check

None of the LEDs light → Try to operate the unit with the
infrared remote controller.
→ Turn off the air conditioner
and restart it.
→ Make sure the LEDs are not
disabled in the application.
→ Check the installation
The WLAN adapter → Check that the power is on.
is not visible on the → Check that the RUN LED is lit.
unit overview screen → If the AP LED is lit, press the MODE
("Home" screen) after button for two seconds to switch to
the WLAN adapter has RUN mode.
been configured. → If the RUN LED is blinking, retry to
connect the WLAN adapter to the
wireless network.
Make sure the WLAN adapter is
close enough to the router (wireless
LAN access point).
→ If the RUN LED is lit, make sure
that the smartphone or tablet is
connected to the same wireless LAN
network as the WLAN adapter.

English 15
Troubleshooting
When this happens Explanation and where to check
When trying to make → If the AP LED is not lit, press the
a direct connection to "Mode" button for 2 seconds to
the adapter (AP mode) switch to AP mode.
the WLAN adapter is not → If the AP LED is blinking, please wait
visible in the available until the AP LED is lit (approximately
Wi-Fi networks list of 1 minute). The WLAN adapter is still
the phone/tablet starting up.
→ If the AP LED is lit, switch to RUN
mode by pressing the MODE button
for two seconds. Now switch back
to AP mode by pressing the MODE
button again for two seconds. This
changes the wireless channel
on which the WLAN adapter
is operating.
Repeat if necessary.
None of the above work → Refer to the FAQ on:
app.daikineurope.com

English 16
4P481234-1E 2022.05