T855III

TRENCHER

TEC® PLUS ELECTRONIC CONTROL SYSTEM. ROTARY POWER TRENCHER DRIVE MOTOR. ELEVATING ROPM CAB. The elevating rollover
The operating system communicates with multiple A rotary power trencher drive motor and splined protective module cab features LEXAN®
control modules located throughout the machine headshaft produce a lower speed and higher glass, filtered and pressurized air, heating and
for real-time performance data and advanced torque which provide superior ground penetration air-conditioning. The cab’s vantage point allows
troubleshooting capabilities. and low chain wear for better production results. a virtually unrestricted view of the boom, trench
and conveyor.

VANTAGE TRACK. Relax in the confidence HYDROSTATIC ROCKWHEEL ATTACHMENT. TERRAIN LEVELER® SURFACE
that your investment is protected and your entire Powered by dual hydrostatic motors, the EXCAVATION MACHINE ATTACHMENT.
closed loop hydrostatic system is covered with rockwheel attachment has the ability to cut a The T855III has a chain drive Terrain Leveler
either a 3-year/3000-hour or 5-year/5000-hour trench up to 54" (137.2 cm) in depth and width option for large rock excavation applications
Extended Care Service program. options of 6", 8", 10", 12" and 14" (15 cm, including surface mining, overburden removal,
20 cm, 31 cm and 36 cm). site preparation and road demolition.

VERMEER.COM
 T855III TRENCHER
GENERAL DIMENSIONS CAB
Approach angle: 20° Air conditioner/heater: Yes
Height: 10.9' (3.3 m) Air suspension seat: No
Length range: 33.3' – 40.3' (10.1 m – 12.3 m) AM/FM stereo with weather band: Yes
Weight range (tractor plus trencher attachment): 82,000 lb – Elevating: Yes
94,000 lb (37,194.6 kg – 42,637.7 kg) Pressurized/Filtered air: Yes
Width range: 8.4' – 8.7' (2.6 m – 2.7 m) Rollover protective module (ROPM): Yes
Level II FOPS: Yes
ENGINE [TIER 3 AND TIER 4I (STAGE IIIB) AVAILABLE]
Make and model: Caterpillar C9 ACERT TRENCHER ATTACHMENT
Gross horsepower: 350 hp (261 kW) Boom depth options: 6', 8', 10' or 12' (1.8 m, 2.4 m, 3 m or 3.7m)
Engine rpm: 2200 Boom top rollers: Yes
Fuel consumption @ full load: 18.3 gph (69.3 L/hr) Chain speed range: 340 fpm – 656 fpm (340 m/min – 200 m/min)
Cutting width range: 18" – 36" (45.7 cm – 91.4 cm)
TRACKS End idler diameter: 40" (101.6 cm)
Ground pressure: 11 psi – 16.4 psi (75.8 kPa – 113 kPa)
Tilt track with Auto Level available: Yes, max angle 12.5°
ROCKWHEEL ATTACHMENT
Track length: 12.3' (3.7 m)
Weight (tractor plus attachment): 102,000 lb (46266.4 kg)
Track pad type: Single, double or triple grouser
Max cutting depth: 54" (137.2 cm)
Track pad width: 20" or 24" (50.8 cm or 61 cm)
Cutting width: 6", 8", 10", 12" or 14" (15.2 cm, 20.3 cm, 25.4 cm,
Track size: D6 30.5 cm or 35.6 cm)
Travel speed max: 199 fpm (60.7 m/min) Cutter tip speed: 838 ft/min (255.4 m/min)
Service brakes: Hydrostatic End idler diameter: 40" (101.6 cm)

CONVEYOR CHAIN DRIVE TERRAIN LEVELER ATTACHMENT

Belt width: 30" (76.2 cm)
Weight (tractor plus attachment): 100,500 lb (45,586 kg)
Max conveyor belt speed: 917 fpm (279.5 m/min)
Max cutting depth: 32" (81.3 cm)
Conveyor belt style: Cleated or finger-type
Cutting width: 102" (259.1 cm)
Conveyor length: 8' or 13' (2.4 m or 4 m)
Drum tilt available: Only if equipped with tilt tracks
Conveyor shift available: Yes
Max drum speed rpm: 60
Conveyor shift distance: 10" or 62" (25.4 cm or 157.4 cm)
Laser and GPS acceptable: Yes
Conveyor style: Curved
Digging chain size: 4501
Discharge direction: Right or left
Discharge height: 57" or 72.5" (144.8 cm or 184.2 cm) OPTIONS
Loadout conveyor
Rockwheel attachment
Chain drive Terrain Leveler attachment
Remote control

Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation.
Equipment shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications.
Vermeer, the Vermeer logo, Equipped to Do More, Terrain Leveler and TEC are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. © 2014 Vermeer Corporation.
All Rights Reserved. Printed in the U.S.A. Please recycle.

PN 115153271