Data sheet

Customer item no.:POMPA

Communication dated: Number: ES 8001990681
Doc. no.: Quick quote Item no.: 100
Quantity: 1 Date: 31/08/2022
Page: 1 / 5

ETN 080-065-200 GGSAA10G202202B Version no.: 1

Low-pressure centrifugal pump Etanorm

Operating data
Requested flow rate 55.00 m ³/h Actual flow rate 55.02 m ³/h
Requested developed head 50.00 m Actual developed head 50.03 m
Pumped medium Oil, lubricating oil Efficiency 57.5 %
Turbine oil MEI (Minimum Efficiency ≥ 0.70
Pumped medium details Not containing chemical and Index)
mechanical substances which Power absorbed 11.58 kW
affect the materials Pump speed of rotation 2974 rpm
Max. ambient air temperature 20.0 °C NPSH required 2.60 m
Min. ambient air temperature 20.0 °C Permissible operating 16.00 bar.g
Fluid temperature 50.0 °C pressure

Fluid density 889 kg/m ³ Discharge press. 4.36 bar.g

Fluid viscosity 36.72 mm ²/s Shutoff head 51.18 m
Suction pressure max. 0.00 bar.g Min. allow. flow for continuous 14.91 m ³/h
Mass flow rate 13.59 kg/s stable operation
Max. power on curve 16.86 kW Min. allow. mass flow for 3.68 kg/s
Max. allow. mass flow 29.79 kg/s continuous stable operation
Design Single system 1 x 100 % Viscosity factor CQ 0.98349845
tolerances to ISO 9906 class Viscosity factor CE 0.87709776
3B Viscosity factor CH 0.98939505

Design
Pump standard EN 733 Shaft seal type 1
Design Baseplate mounted, long- Material code Q1Q1X4GG
coupled Shaft seal code 10
Orientation Horizontal Sealing plan A Single-acting mechanical
Suction nominal dia. DN 80 seal (A-type casing cover,
Suction nominal pressure PN 16 taper bore)
Suction position axial Seal chamber design Conical seal chamber (A-type
Suction flange dimension EN1092-2 cover)
according to standard Contact guard With
Suction flange drilled EN1092-2 Wear ring Casing wear ring
according to standard Impeller diameter 189.0 mm
Discharge nominal dia. DN 65 Free passage size 13.3 mm
Discharge normi nal pressure PN 16 Silicon free pump assembly Yes
Discharge position top (0°/360°) Bearing bracket construction Water standard standard
Discharge flange dimension EN1092-2 Bearing bracket size 25
according to standard. Bearing seal V ring
Discharge flange drilled EN1092-2 Bearing type Anti-friction bearings
according to standard Lubrication type Grease
Surface type Raised face (form B to EN Color Ultramarine blue (RAL 5002)
1092) KSB-blue
Flanges DN 65 will be drilled with 4 holes
Shaft seal Single acting mechanical
seal
Shaft seal manufacturer KSB
Data sheet

Customer item no.:POMPA

Communication dated: Number: ES 8001990681
Doc. no.: Quick quote Item no.: 100
Quantity: 1 Date: 31/08/2022
Page: 2 / 5

ETN 080-065-200 GGSAA10G202202B Version no.: 1

Low-pressure centrifugal pump Etanorm

Driver, accessories
Coupling Manufacturer Flender Rated power P2 22.00 kW
Coupling type Eupex BDS Available reserve 89.91 %
Nominal size 118 Number of poles 2
Motor data can vary from type plate information. Motor data
Baseplate drain piping
describes KSB ´s choice functional specification and is used
material for pump selection.
Driver type Electric motor
CE-approval Yes
Drive standard mech. IEC
EAC Approval Yes
Drive supplied by without motor
Ambient temperature 40.0 °C
Motor const. type B3 Max. absolute humidity 30 %
Motor size 180M
Temp. sensor mtr. bearing Without
Frequency 50 Hz
UKCA conformity Yes

Materials G
Casing wear ring (502.1) Grey cast iron GG/CAST IRON
Notes 1 Casing wear ring (502.2) Grey cast iron GG/CAST IRON
For inflammable liquids only ductile materials should be used Shaft sleeve (523) CrNiMo steel
for pressure retaining parts. Non-ductile materials are only Shaft protecting sleeve (524) Without
offered at the customer's express request. All liability for their Stud (902) Steel 8.8
use shall be excluded. Nut (920.01) 8+A2A/ 8+B633 SC1 TP3
Volute casing (102) Grey cast iron EN-GJL- Nut (920.95) Steel 8
250/A48CL35B
Casing cover (161) Grey cast iron EN-GJL-
250/A48CL35B
Shaft (210) Tempered steel C45+N
Impeller (230) Grey cast iron EN-GJL-
250/A48CL35B
Bearing bracket (330) Grey cast iron EN-GJL-
250/A48CL35B
Flat gasket (400) DPAF DW001

Packaging
Packaging for transport Truck Packaging category A0 Packing acc. to KSB
Packaging for storage Indoor choice

Nameplates
Nameplates language International
Performance curve

Customer item no.:POMPA

Communication dated: Number: ES 8001990681
Doc. no.: Quick quote Item no.:100
Quantity: 1 Date: 31/08/2022
Page: 3 / 5

ETN 080-065-200 GGSAA10G202202B Version no.: 1

Low-pressure centrifugal pump Etanorm

Qmin

60
Total developed head

Qmin
ø219.0/A01
[m]

Qmin
40
ø189.0/A01

ø165.0/A01

20
0 20 [m³/h] 40 60 80 100 120 140 160

4
NPSH

[m]

2
0 20 [m³/h] 40 60 80 100 120 140 160
Efficiency

50

[%]

0
0 20 [m³/h] 40 60 80 100 120 140 160
18

[kW ]
Power Input

10

4
0 20 [m³/h] 40 60 80 100 120 140 160
Flow
Curve data
Speed of rotation 2974 rpm Efficiency 57.5 %
Fluid density 889 kg/m ³ MEI (Minimum Efficiency ≥ 0.70
Viscosity 36.72 mm ²/s Index)
Flow rate 55.02 m ³/h Power absorbed 11.58 kW
Requested flow rate 55.00 m ³/h NPSH required 2.60 m
Total developed head 50.03 m Curve number K1311.452/37
Requested developed head 50.00 m Effective impeller diameter 189.0 mm
Installation plan

Customer item no.:POMPA

Communication dated: Number: ES 8001990681
Doc. no.: Quick quote Item no.:100
Quantity: 1 Date: 31/08/2022
Page: 4 / 5

ETN 080-065-200 GGSAA10G202202B Version no.: 1

Low-pressure centrifugal pump Etanorm

100 360 140

155 178
DN2
50

225

DN1
180 18
6

47.5 260 100

25
65 110
320 24
250 95 14
190 160
8
27

14 48
125

Drawing is not to scale Dimensions in mm

Motor Connections
required but not scope of supply Suction nominal size DN1 DN 80 / EN1092-2
Motor size 180M Discharge nominal size DN2 DN 65 / EN1092-2
Motor power 22.00 kW Nominal pressure suct. PN 16
Number of poles 2 Rated pressure disch. PN 16
Speed of rotation 2974 rpm Flanges DN 65 will be drilled with 4 holes

Coupling
Coupling manufacturer Flender
Coupling type Eupex BDS
Coupling size 118
Spacer 0.0 mm

Weight net
Pump 50 kg
Coupling 4 kg
Total 54 kg
Connect pipes without stress or strain! For auxiliary connections see
separate drawing.
Connection plan

Customer item no.:POMPA

Communication dated: Number: ES 8001990681
Doc. no.: Quick quote Item no.:100
Quantity: 1 Date: 31/08/2022
Page: 5 / 5

ETN 080-065-200 GGSAA10G202202B Version no.: 1

Low-pressure centrifugal pump Etanorm

Connections
Pump casing variant XX46
6B Pumped liquid drain G 3/8 Drilled and plugged.
6D Pumped medium - filling / venting G 3/8 Not executed
8B Leakage drain G 1/2 Drilled
1M.1 / 6D Pressure gauge or filling/venting G 3/8 Drilled and plugged.
connection
1M.2 Pressure gauge connection G 3/8 Not executed