Primary lithium battery

LS 33600

3.6 V Primary lithium-thionyl chloride (Li-SOCl2)

High energy
D-size bobbin cell

Benefits
Cell size references D
l High voltage response, stable
during most of the lifetime of the Electrical characteristics
application (typical values relative to cells stored for one year or less at + 30°C max.)
l Wide operating temperature
Nominal capacity 17.0 Ah
range (- 60°C/85°C) (at 5 mA + 20°C 2.0 V cut-off. The capacity restored by the cell varies
l Easy integration in compact according to current drain, temperature and cut-off)
system Open circuit voltage (at + 20°C) 3.67 V
l Low self-discharge rate
Nominal voltage (at 0.7 mA + 20°C) 3.6 V
(less than 1 % after 1 year of
Nominal energy 61.2 Wh
storage at + 20°C)
Pulse capability: Typically up to 400 mA
(400 mA/0.1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 µA
Key features
base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse
l Stainless steel container characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor
may be recommended in severe conditions. Consult Saft)
l Hermetic glass-to-metal sealing
l Built-in safety vent Maximum recommended continuous current 250 mA
(to maintain cell heating within safe limits. Battery packs may imply lower
l Finish with or without flat
level of maximum current and may request specific thermal protection.
positive end Consult Saft)
l Non-flammable electrolyte
Storage (recommended) + 30°C (+ 86°F) max
l Compliant with IEC 60086-4 (for more severe conditions, consult Saft)
safety standard and Operating temperature range - 60°C/+ 85°C
IEC 60079-11 intrinsic safety (Operation above ambient T may lead to reduced capacity and (- 76°F/+ 185°F)
standard lower voltage readings at the beginning of pulses. Consult Saft)
l Underwriters Laboratories (UL)
Physical characteristics
Component Recognition
(File Number MH 12609) Diameter (max) 33.4 mm (1.32 in)

l Restricted for transport (Class 9) Height (max) 60.2 or 61.6 mm

(2.37 in or 2.42 in)
depending on finish type
Main applications
Typical weight 90 g (3.2 oz)
l Utility metering
Li metal content approx. 4.5 g
l Automatic meter readers
l Buoys Available termination suffix
CN, CNR radial tabs
l Measuring equipment
CNA (AX) axial leads
l Industrial applications FL flying leads... etc.
l Professional electronics
l Marine equipment

Optional upon request

l Low magnetic version

July 2010
LS 33600 Voltage plateau versus Current and Temperature (at mid-discharge)

3.6
3.5
Ø 33.1 ± 0.3 3.4

Cell voltage (V)

Ø 9.3 ± 0.1
(on flat surface) 3.3 + 55°C
3.2
3.1
2.1 ± 0.2 3.0
2.9
- 20°C
2.8

61.0 ± 0.6 2.7

+ 20°C
2.6 - 40°C
2.5

0.1 1 1 10 100 1000

0.5
Current (mA)

Ø 18.0 ± 0.2
(on flat surface)

Typical discharge profiles at + 20°C

Finished version with
protruding positive end cap
3.5
Ø 33.1 ± 0.3
3.3
Ø 13.8 ± 0.2
Cell voltage (V)

(on flat surface)

3.1

1000 Ohms/3.5 mA
515 Ohms/6.9 mA
30 Ohms/107 mA
15 Ohms/200 mA
2.9

0.6 ± 0.2 2.7

2.5

2.3
59.6 ± 0.6
2.1

1.9
1.7
0.5
0.1 1 10 100 1000 10000
Time (hours)
Ø 18.0 ± 0.2
(on flat surface)

Finished version with Restored Capacity versus Current and Temperature (2.0 V cut-off)
flat positive end cap

Dimensions in mm. 16.0

14.0

Storage
Capacity (Ah)

12.0

• The storage area should be clean, 10.0

cool (preferably not exceeding 8.0 + 20°C
+ 30°C), dry and ventilated. - 20°C
6.0

Warning 4.0

• Fire, explosion and burn hazard. 2.0

- 40°C

• Do not recharge, short circuit, 0

crush, disassemble, heat above
0.1 1 10 100 1000
100°C (212°F), incinerate, Current (mA)
or expose contents to water.
• Do not solder directly to the cell
(use tabbed cell versions instead).

Doc. No 31007-2 -0710

Information in this document is subject to change without notice
and becomes contractual only after written confirmation by Saft.
For more details on primary lithium technologies please refer to
Primary Lithium Batteries Selector Guide Doc No 31048-2.
Published by the Communications Department.
Photo credit: Saft
Société anonyme au capital de 31 944 000
RCS Bobigny B 383 703 873
Produced by Arthur Associates Limited.