Scribd
Upload
12 views

Attachment (3) - Product Data Sheets3.1 SIEMENS Product Data Sheets6DL11346TH000PH1 - en

Uploaded by

dcc.smd2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

Attachment (3) - Product Data Sheets3.1 SIEMENS Product Data Sheets6DL11346TH000PH1 - en

Uploaded by

dcc.smd2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Data sheet 6DL1134-6TH00-0PH1

SIMATIC ET 200SP HA, analog HART input module, AI 16XI 2-wire HART HA,
suitable for terminal block H1, M1, color code CC01, channel diagnostics, 16-bit,
+/-0.1%,

General information
Product type designation AI 16 x I 2-wire mA HART
Firmware version V1.1
● FW update possible Yes
Usable terminal block TB type H1, M1, P0 and N0
Color code for module-specific color identification plate CC01
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● PCS 7 configurable/integrated from version V9.0
Redundancy
● Redundancy capability Yes; With TB type M1
CiR - Configuration in RUN
Reparameterization possible in RUN Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 80 mA; without sensor supply
Current consumption, max. 90 mA; without sensor supply
Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes; Electronic (response threshold 0.7 A to 1.5 A)
● Output current per channel, max. 0.5 A
● Output current per module, max. 2A
Power loss
Power loss, typ. 4.5 W; without sensor supply
Address area
Address space per module
● Address space per module, max. 34 byte; 32-byte inputs and 2 bytes for QI information
● Address space per module with HART, max. 74 byte; 32-byte inputs and 2 bytes for QI information, 40-byte inputs for HART
● Address space per module with MultiHART, max. 41 byte; 32-byte inputs for HART and 2 bytes for QI information, 6-byte inputs
for HART, and 1-byte output for MultiHART command
Analog inputs
Number of analog inputs 16
permissible input current for current input (destruction limit), 30 mA
max.

6DL11346TH000PH1 Subject to change without notice


10/23/2023
Page 1/3 © Copyright Siemens
Input ranges (rated values), currents
● 0 to 20 mA Yes; 16 bit incl. sign
— Input resistance (0 to 20 mA) 250 Ω
● 4 mA to 20 mA Yes; 16 bit incl. sign
— Input resistance (4 mA to 20 mA) 250 Ω
Cable length
● shielded, max. 800 m; with unshielded cables up to 800 m, remember that (external) EMC
loads can cause incorrect measured values
Analog value generation for the inputs
Measurement principle integrating (Sigma-Delta)
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit; 15 bit at 0 ... 10 mA and 60 Hz interference suppression
● Integration time, parameterizable Yes; channel by channel
Smoothing of measured values
● parameterizable Yes; none, weak, medium, strong, channel-by-channel
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. 60 dB
Repeat accuracy in steady state at 25 °C (relative to input 0.05 %
range), (+/-)
Operational error limit in overall temperature range
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-) 0.1 %
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Limit value alarm Yes; two upper and two lower limit values in each case
Diagnoses
● Monitoring the supply voltage Yes
● Wire-break Yes; channel by channel
● Short-circuit Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an
input to the encoder supply
● Overflow/underflow Yes; channel by channel
Diagnostics indication LED
● MAINT LED Yes; Yellow LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● Between the channels and load voltage L+ No
Isolation
Isolation tested with 1 500 V DC/1 min, type test
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -40 °C
● horizontal installation, max. 70 °C; Observe derating
● vertical installation, min. -40 °C
● vertical installation, max. 60 °C; Observe derating
Dimensions
Width 22.5 mm
Height 115 mm

6DL11346TH000PH1 Subject to change without notice


10/23/2023
Page 2/3 © Copyright Siemens
Depth 138 mm
Weights
Weight, approx. 148 g

last modified: 8/11/2023

6DL11346TH000PH1 Subject to change without notice


10/23/2023
Page 3/3 © Copyright Siemens

You might also like