Scribd
Upload
20 views

Output 3

This document contains the input file for a structural analysis project using STAAD.Pro software. It includes modeling details like joint coordinates, member incidences, material properties, load cases, and other analysis parameters needed to analyze the structural model.

Uploaded by

Trending Juan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Output 3

This document contains the input file for a structural analysis project using STAAD.Pro software. It includes modeling details like joint coordinates, member incidences, material properties, load cases, and other analysis parameters needed to analyze the structural model.

Uploaded by

Trending Juan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 131

Thursday, May 30, 2024, 01:40 AM

****************************************************
* *
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.33 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 30, 2024 *
* Time= 1:39:20 *
* *
* USER ID: *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\Acer\Desktop\Project May 29\Project Aug 13.STD
2. START JOB INFORMATION
3. ENGINEER DATE 29-MAY-24
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 4.9 0 0; 3 0.2 0 2.9; 4 0.5 0 6.35; 5 4.9 0 2.9; 6 4.9 0 6.35
9. 7 0 3.9 0; 8 4.9 3.9 0; 9 0.2 3.9 2.9; 10 0.5 3.9 6.35; 11 4.9 3.9 2.9
10. 12 4.9 3.9 6.35; 13 0 6.7 0; 14 4.9 6.7 0; 15 0.2 6.7 2.9; 16 0.5 6.7 6.35
11. 17 4.9 6.7 2.9; 18 4.9 6.7 6.35; 19 0.5 6.7 7.45; 20 4.9 6.7 7.45
12. 21 3.85 6.7 0; 22 3.85 6.7 2.9; 23 3.85 6.7 6.35; 24 0 9.5 0; 25 4.9 9.5 0
13. 26 0.2 9.5 2.9; 27 0.5 9.5 6.35; 28 4.9 9.5 2.9; 29 4.9 9.5 6.35
14. 30 0.16 9.5 2.2; 31 4.9 9.5 2.2; 32 3.85 9.5 2.2; 33 3.85 9.5 6.35
15. 34 0 12.3 0; 35 4.9 12.3 0; 36 0.2 12.3 2.9; 37 0.5 12.3 6.35; 38 4.9 12.3 2.9
16. 39 4.9 12.3 6.35; 40 0.16 12.3 2.2; 41 4.9 12.3 2.2; 42 3.85 12.3 2.2
17. 43 3.85 12.3 6.35; 44 0 15.1 0; 45 4.9 15.1 0; 46 0.2 15.1 2.9
18. 47 0.5 15.1 6.35; 48 4.9 15.1 2.9; 49 4.9 15.1 6.35; 50 0.16 15.1 2.2
19. 51 4.9 15.1 2.2; 52 3.85 15.1 2.2; 53 3.85 15.1 6.35
20. MEMBER INCIDENCES
21. 1 1 7; 2 2 8; 3 3 9; 4 4 10; 5 5 11; 6 6 12; 7 7 8; 8 9 11; 9 10 12; 10 7 9
22. 11 9 10; 12 8 11; 13 11 12; 14 7 13; 15 8 14; 16 9 15; 17 10 16; 18 11 17
23. 19 12 18; 23 13 15; 24 15 16; 25 14 17; 26 17 18; 27 21 22; 28 22 23; 29 16 19
24. 30 18 20; 31 19 20; 32 13 24; 33 14 25; 34 15 26; 35 16 27; 36 17 28; 37 18 29
25. 41 24 25; 45 26 27; 47 28 29; 48 24 30; 49 30 26; 50 30 32; 51 32 31; 52 32 33
26. 53 24 34; 54 25 35; 55 26 36; 56 27 37; 57 28 38; 58 29 39; 63 34 35; 65 36 37
27. 67 38 39; 68 34 40; 69 40 36; 70 40 42; 71 42 41; 72 42 43; 73 34 44; 74 35 45
28. 75 36 46; 76 37 47; 77 38 48; 78 39 49; 83 44 45; 85 46 47; 87 48 49; 88 44 50
29. 89 50 46; 90 50 52; 91 52 51; 92 52 53; 93 16 23; 94 23 18; 95 15 22; 96 22 17
30. 97 13 21; 98 21 14; 99 25 31; 100 31 28; 101 27 33; 102 33 29; 103 35 41
31. 104 41 38; 105 37 43; 106 43 39; 107 45 51; 108 51 48; 109 47 53; 110 53 49
32. START GROUP DEFINITION
33. FLOOR
34. _2F2W 23 24 27 28 93 95 97
35. _2F1W 25 TO 31 93 94 96 98
36. _3F2W 45 49 50 52 101
37. _3F1W 41 47 48 50 TO 52 99 100 102
38. _4F2W 65 69 70 72 105
39. _4F1W 63 67 68 70 TO 72 103 104 106
40. _RF2W 85 89 90 92 109
41. _RF1W 83 87 88 90 TO 92 107 108 110
42. END GROUP DEFINITION

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 1 of 131


Thursday, May 30, 2024, 01:40 AM

43. DEFINE MATERIAL START


44. ISOTROPIC CONCRETE
45. E 2.17185E+007
46. POISSON 0.17
47. DENSITY 23.5616
48. ALPHA 1E-005
49. DAMP 0.05
50. TYPE CONCRETE
51. STRENGTH FCU 27579
52. END DEFINE MATERIAL
53. MEMBER PROPERTY AMERICAN
54. 1 TO 6 14 TO 19 32 TO 37 53 TO 58 73 TO 78 PRIS YD 0.5 ZD 0.3
55. 7 TO 13 23 TO 31 41 45 47 TO 52 63 65 67 TO 72 83 85 87 TO 109 -
56. 110 PRIS YD 0.5 ZD 0.3
57. CONSTANTS
58. MATERIAL CONCRETE ALL
59. SUPPORTS
60. 1 TO 6 FIXED
61. DEFINE REFERENCE LOADS
62. LOAD R1 LOADTYPE DEAD TITLE DL
63. SELFWEIGHT Y 1
64. FLOOR LOAD
65. _2F2W FLOAD 8 GY
66. ONEWAY LOAD
67. _2F1W ONE 8 GY
68. FLOOR LOAD
69. _3F2W FLOAD 8 GY
70. ONEWAY LOAD
71. _3F1W ONE 8 GY
72. FLOOR LOAD
73. _4F2W FLOAD 8 GY
74. ONEWAY LOAD
75. _4F1W ONE 8 GY
76. FLOOR LOAD
77. _RF2W FLOAD 8 GY
78. ONEWAY LOAD
79. _RF1W ONE 8 GY
80. LOAD R2 LOADTYPE LIVE TITLE LL
81. FLOOR LOAD
82. _2F2W FLOAD 3 GY
83. ONEWAY LOAD
84. _2F1W ONE 3 GY
85. FLOOR LOAD
86. _3F2W FLOAD 3 GY
87. ONEWAY LOAD
88. _3F1W ONE 3 GY
89. FLOOR LOAD
90. _4F2W FLOAD 3 GY
91. ONEWAY LOAD
92. _4F1W ONE 3 GY
93. END DEFINE REFERENCE LOADS
94. FLOOR DIAPHRAGM
95. DIA 6 TYPE RIG HEI 3.9 JOINT 7 TO 12
96. DIA 7 TYPE RIG HEI 6.7 JOINT 13 TO 23
97. DIA 8 TYPE RIG HEI 9.5 JOINT 24 TO 33
98. DIA 9 TYPE RIG HEI 12.3 JOINT 34 TO 43
99. DIA 10 TYPE RIG HEI 15.1 JOINT 44 TO 53
100. CHECK SOFT STORY ASCE7

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 2 of 131


Thursday, May 30, 2024, 01:40 AM

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.


MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE LOAD

*** NOTE: MASS MODEL FORMED WILL BE USED IN SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY
IF MASS MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE GENERATED MASS
WILL BE REPLACED BY THE MASS PROVIDED IN INDIVIDUAL LOADING.

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE


--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS MASTER JOINT NO.
X Z

6 RIGID 3.900 165.47 2.565 3.074 54


7 RIGID 6.700 578.61 2.633 3.629 55
8 RIGID 9.500 494.28 2.604 3.106 56
9 RIGID 12.300 494.28 2.604 3.106 57
10 RIGID 15.100 375.77 2.616 3.108 58

************************************************************************************

101. DEFINE UBC LOAD


102. ZONE 0.4 I 1 RWX 8.5 RWZ 8.5 STYP 4 NA 1 NV 1.2
103. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE


WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

104. R1 1.0 R2 0.25


105. DEFINE WIND LOAD
106. TYPE 1 WWX
107. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
108. ASCE-7-2010:PARAMS 260.000 KMPH 0 1 2 0 0.000 FT 0.000 FT 0.000 FT 1 -
109. 2 15.000 M 4.900 M 6.350 M 2.000 0.010 0 -
110. 0 0 0 0 0.807 1.000 1.000 0.850 0 -
111. 0 0 0 0.863 0.800 -0.180
112. !> END GENERATED DATA BLOCK
113. INT 3.81891 3.81891 3.95107 4.06979 4.17796 4.27758 4.37011 4.45665 4.53806 -
114. 4.61501 4.68805 4.75761 4.82409 4.88777 4.94894 1.61754 HEIG 0 4.572 -
115. 5.37415 6.17631 6.97846 7.78061 8.58277 9.38492 10.1871 10.9892 -
116. 11.7914 12.5935 13.3957 14.1979 15 8.17
117. TYPE 2 LWX
118. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
119. ASCE-7-2010:PARAMS 260.000 KMPH 0 1 2 0 0.000 FT 0.000 FT 0.000 FT 1 -
120. 2 15.000 M 4.900 M 6.350 M 2.000 0.010 1 -
121. 0 0 0 0 0.807 1.000 1.000 0.850 0 -
122. 0 0 0 0.863 -0.500 0.180
123. !> END GENERATED DATA BLOCK
124. INT -3.47675 -3.47675 -1.1058 HEIG 0 15 8.17
125. TYPE 3 WWZ
126. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
127. ASCE-7-2010:PARAMS 260.000 KMPH 0 1 2 0 0.000 FT 0.000 FT 0.000 FT 1 -
128. 2 15.000 M 6.350 M 4.900 M 2.000 0.010 0 -
129. 0 0 0 0 0.807 1.000 1.000 0.850 0 -

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 3 of 131


Thursday, May 30, 2024, 01:40 AM

130. 0 0 0 0.866 0.800 -0.180


131. !> END GENERATED DATA BLOCK
WARNING- One or more lines are too long and will be split into 2 lines.
This may not work for all commands. Please check.
132. INT 3.8263 3.8263 3.9588 4.07784 4.1863 4.28618 4.37895 4.46572 4.54735 -
133. 4.6245 -
134. 4.69773 4.76748 4.83413 4.89798 4.95931 1.61551 HEIG 0 4.572 5.37415 -
135. 6.17631 6.97846 7.78061 8.58277 9.38492 10.1871 10.9892 11.7914 -
136. 12.5935 13.3957 14.1979 15 8.17
137. TYPE 4 LWZ
138. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
139. ASCE-7-2010:PARAMS 260.000 KMPH 0 1 2 0 0.000 FT 0.000 FT 0.000 FT 1 -
140. 2 15.000 M 6.350 M 4.900 M 2.000 0.010 1 -
141. 0 0 0 0 0.807 1.000 1.000 0.850 0 -
142. 0 0 0 0.866 -0.441 0.180
143. !> END GENERATED DATA BLOCK
144. INT -3.19203 -3.19203 -1.13422 HEIG 0 15 8.17
145. LOAD 1 LOADTYPE SEISMIC TITLE EQ +X +E
146. UBC LOAD X 1 DEC 1 ACC 0.05
147. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 58 NUMBER OF MEMBERS 88


NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 11/ 11/ 157 DOF


TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 171
TOTAL LOAD COMBINATION CASES = 0 SO FAR.
SIZE OF STIFFNESS MATRIX = 27 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.4/ 53440.9 MB

WARNING : EXTREME SOFT STOREY DETECTED.


STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 4 of 131


Thursday, May 30, 2024, 01:40 AM

* *
* X DIRECTION : Ta = 0.560 Tb = 0.682 Tuser = 0.000 *
* T = 0.682, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 1 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 3.90 0.00 0.00 0.25 0.32 0.00 0.32


2 6.70 0.00 0.00 0.25 0.37 0.00 0.37
3 9.50 0.00 0.00 0.25 0.32 0.00 0.32
4 12.30 0.00 0.00 0.25 0.32 0.00 0.32
5 15.10 0.00 0.00 0.25 0.32 0.00 0.32

************************************************************************

148. CHANGE
149. LOAD 2 LOADTYPE SEISMIC TITLE EQ +X -E
150. UBC LOAD X 1 DEC 1 ACC -0.05
151. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* X DIRECTION : Ta = 0.560 Tb = 0.682 Tuser = 0.000 *

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 5 of 131


Thursday, May 30, 2024, 01:40 AM

* T = 0.682, LOAD FACTOR = 1.000 *


* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 2 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec - aec dec - aec

1 3.90 0.00 0.00 -0.25 -0.32 0.00 -0.32


2 6.70 0.00 0.00 -0.25 -0.37 0.00 -0.37
3 9.50 0.00 0.00 -0.25 -0.32 0.00 -0.32
4 12.30 0.00 0.00 -0.25 -0.32 0.00 -0.32
5 15.10 0.00 0.00 -0.25 -0.32 0.00 -0.32

************************************************************************

152. CHANGE
153. LOAD 3 LOADTYPE SEISMIC TITLE EQ -X +E
154. UBC LOAD X -1 DEC 1 ACC 0.05
155. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* X DIRECTION : Ta = 0.560 Tb = 0.682 Tuser = 0.000 *
* T = 0.682, LOAD FACTOR = -1.000 *

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 6 of 131


Thursday, May 30, 2024, 01:40 AM

* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *


* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 3 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 3.90 0.00 0.00 0.25 0.32 0.00 0.32


2 6.70 0.00 0.00 0.25 0.37 0.00 0.37
3 9.50 0.00 0.00 0.25 0.32 0.00 0.32
4 12.30 0.00 0.00 0.25 0.32 0.00 0.32
5 15.10 0.00 0.00 0.25 0.32 0.00 0.32

************************************************************************

156. CHANGE
157. LOAD 4 LOADTYPE SEISMIC TITLE EQ -X -E
158. UBC LOAD X -1 DEC 1 ACC -0.05
159. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* X DIRECTION : Ta = 0.560 Tb = 0.682 Tuser = 0.000 *
* T = 0.682, LOAD FACTOR = -1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 7 of 131


Thursday, May 30, 2024, 01:40 AM

***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 4 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec - aec dec - aec

1 3.90 0.00 0.00 -0.25 -0.32 0.00 -0.32


2 6.70 0.00 0.00 -0.25 -0.37 0.00 -0.37
3 9.50 0.00 0.00 -0.25 -0.32 0.00 -0.32
4 12.30 0.00 0.00 -0.25 -0.32 0.00 -0.32
5 15.10 0.00 0.00 -0.25 -0.32 0.00 -0.32

************************************************************************

160. CHANGE
161. LOAD 5 LOADTYPE SEISMIC TITLE EQ +Z +E
162. UBC LOAD Z 1 DEC 1 ACC 0.05
163. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* Z DIRECTION : Ta = 0.560 Tb = 0.780 Tuser = 0.000 *
* T = 0.560, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *
***********************************************************

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 8 of 131


Thursday, May 30, 2024, 01:40 AM

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 5 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 3.90 0.00 0.00 0.25 0.32 0.25 0.00


2 6.70 0.00 0.00 0.25 0.37 0.25 0.00
3 9.50 0.00 0.00 0.25 0.32 0.25 0.00
4 12.30 0.00 0.00 0.25 0.32 0.25 0.00
5 15.10 0.00 0.00 0.25 0.32 0.25 0.00

************************************************************************

164. CHANGE
165. LOAD 6 LOADTYPE SEISMIC TITLE EQ +Z -E
166. UBC LOAD Z 1 DEC 1 ACC -0.05
167. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* Z DIRECTION : Ta = 0.560 Tb = 0.780 Tuser = 0.000 *
* T = 0.560, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *
***********************************************************

************************************************************************

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 9 of 131


Thursday, May 30, 2024, 01:40 AM

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 6 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec - aec dec - aec

1 3.90 0.00 0.00 -0.25 -0.32 -0.25 0.00


2 6.70 0.00 0.00 -0.25 -0.37 -0.25 0.00
3 9.50 0.00 0.00 -0.25 -0.32 -0.25 0.00
4 12.30 0.00 0.00 -0.25 -0.32 -0.25 0.00
5 15.10 0.00 0.00 -0.25 -0.32 -0.25 0.00

************************************************************************

168. CHANGE
169. LOAD 7 LOADTYPE SEISMIC TITLE EQ -Z +E
170. UBC LOAD Z -1 DEC 1 ACC 0.05
171. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* Z DIRECTION : Ta = 0.560 Tb = 0.780 Tuser = 0.000 *
* T = 0.560, LOAD FACTOR = -1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *
***********************************************************

************************************************************************

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 10 of 131


Thursday, May 30, 2024, 01:40 AM

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.


TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 7 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec + aec dec + aec

1 3.90 0.00 0.00 0.25 0.32 0.25 0.00


2 6.70 0.00 0.00 0.25 0.37 0.25 0.00
3 9.50 0.00 0.00 0.25 0.32 0.25 0.00
4 12.30 0.00 0.00 0.25 0.32 0.25 0.00
5 15.10 0.00 0.00 0.25 0.32 0.25 0.00

************************************************************************

172. CHANGE
173. LOAD 8 LOADTYPE SEISMIC TITLE EQ -Z -E
174. UBC LOAD Z -1 DEC 1 ACC -0.05
175. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

***********************************************************
* *
* Z DIRECTION : Ta = 0.560 Tb = 0.780 Tuser = 0.000 *
* T = 0.560, LOAD FACTOR = -1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 1939.01 = 250.93 KN *
* *
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 11 of 131


Thursday, May 30, 2024, 01:40 AM

DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 8 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
X Z X Z X Z
dec - aec dec - aec

1 3.90 0.00 0.00 -0.25 -0.32 -0.25 0.00


2 6.70 0.00 0.00 -0.25 -0.37 -0.25 0.00
3 9.50 0.00 0.00 -0.25 -0.32 -0.25 0.00
4 12.30 0.00 0.00 -0.25 -0.32 -0.25 0.00
5 15.10 0.00 0.00 -0.25 -0.32 -0.25 0.00

************************************************************************

176. CHANGE
177. LOAD 9 LOADTYPE DEAD TITLE DL
178. REFERENCE LOAD
179. R1 -1.0
180. LOAD 10 LOADTYPE LIVE TITLE LL
181. REFERENCE LOAD
182. R2 -1.0
183. LOAD 11 LOADTYPE LIVE TITLE LLR
184. FLOOR LOAD
185. _RF2W FLOAD -3 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

186. ONEWAY LOAD


187. _RF1W ONE -3 GY
188. LOAD 12 LOADTYPE WIND TITLE WL +X
189. WIND LOAD X 1 TYPE 1
190. WIND LOAD -X 1 TYPE 2
191. LOAD 13 LOADTYPE WIND TITLE WL -X
192. WIND LOAD X -1 TYPE 1
193. WIND LOAD -X -1 TYPE 2
194. LOAD 14 LOADTYPE WIND TITLE WL +Z
195. WIND LOAD Z 1 TYPE 3
196. WIND LOAD -Z 1 TYPE 4
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 1.5879E-01
at coordinates: 2.0000E-01 6.7000E+00 0.0000E+00 ignored.
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 8.7936E-01
at coordinates: 2.0000E-01 9.5000E+00 0.0000E+00 ignored.
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 8.9377E-01
at coordinates: 2.0000E-01 1.2300E+01 0.0000E+00 ignored.
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 4.4688E-01
at coordinates: 2.0000E-01 1.5100E+01 0.0000E+00 ignored.
197. LOAD 15 LOADTYPE WIND TITLE WL -Z
198. WIND LOAD Z -1 TYPE 3
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 -5.1198E-01
at coordinates: 2.0000E-01 6.7000E+00 0.0000E+00 ignored.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 12 of 131


Thursday, May 30, 2024, 01:40 AM

**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 -1.2447E+00


at coordinates: 2.0000E-01 9.5000E+00 0.0000E+00 ignored.
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 -1.3373E+00
at coordinates: 2.0000E-01 1.2300E+01 0.0000E+00 ignored.
**WARNING-fx fy fz wind forces: 0.0000E+00 0.0000E+00 -6.9125E-01
at coordinates: 2.0000E-01 1.5100E+01 0.0000E+00 ignored.
199. WIND LOAD -Z -1 TYPE 4
200. LOAD COMB 16 GENERATED NSCP 2015 DRIFT CHECK 1
201. 9 1.2 12 0.5
202. LOAD COMB 17 GENERATED NSCP 2015 DRIFT CHECK 2
203. 9 1.2 13 0.5
204. LOAD COMB 18 GENERATED NSCP 2015 DRIFT CHECK 3
205. 9 1.2 14 0.5
206. LOAD COMB 19 GENERATED NSCP 2015 DRIFT CHECK 4
207. 9 1.2 15 0.5
208. LOAD COMB 20 GENERATED NSCP 2015 DRIFT CHECK 5
209. 9 1.2 10 0.5 11 0.5 12 1.0
210. LOAD COMB 21 GENERATED NSCP 2015 DRIFT CHECK 6
211. 9 1.2 10 0.5 11 0.5 13 1.0
212. LOAD COMB 22 GENERATED NSCP 2015 DRIFT CHECK 7
213. 9 1.2 10 0.5 11 0.5 14 1.0
214. LOAD COMB 23 GENERATED NSCP 2015 DRIFT CHECK 8
215. 9 1.2 10 0.5 11 0.5 15 1.0
216. LOAD COMB 24 GENERATED NSCP 2015 DRIFT CHECK 9
217. 9 1.2 10 0.5 11 0.5 1 1.0
218. LOAD COMB 25 GENERATED NSCP 2015 DRIFT CHECK 10
219. 9 1.2 10 0.5 11 0.5 2 1.0
220. LOAD COMB 26 GENERATED NSCP 2015 DRIFT CHECK 11
221. 9 1.2 10 0.5 11 0.5 3 1.0
222. LOAD COMB 27 GENERATED NSCP 2015 DRIFT CHECK 12
223. 9 1.2 10 0.5 11 0.5 4 1.0
224. LOAD COMB 28 GENERATED NSCP 2015 DRIFT CHECK 13
225. 9 1.2 10 0.5 11 0.5 5 1.0
226. LOAD COMB 29 GENERATED NSCP 2015 DRIFT CHECK 14
227. 9 1.2 10 0.5 11 0.5 6 1.0
228. LOAD COMB 30 GENERATED NSCP 2015 DRIFT CHECK 15
229. 9 1.2 10 0.5 11 0.5 7 1.0
230. LOAD COMB 31 GENERATED NSCP 2015 DRIFT CHECK 16
231. 9 1.2 10 0.5 11 0.5 8 1.0
232. LOAD COMB 32 GENERATED NSCP 2015 DRIFT CHECK 17
233. 9 0.9 12 1.0
234. LOAD COMB 33 GENERATED NSCP 2015 DRIFT CHECK 18
235. 9 0.9 13 1.0
236. LOAD COMB 34 GENERATED NSCP 2015 DRIFT CHECK 19
237. 9 0.9 14 1.0
238. LOAD COMB 35 GENERATED NSCP 2015 DRIFT CHECK 20
239. 9 0.9 15 1.0
240. LOAD COMB 36 GENERATED NSCP 2015 DRIFT CHECK 21
241. 9 0.9 1 1.0
242. LOAD COMB 37 GENERATED NSCP 2015 DRIFT CHECK 22
243. 9 0.9 2 1.0
244. LOAD COMB 38 GENERATED NSCP 2015 DRIFT CHECK 23
245. 9 0.9 3 1.0
246. LOAD COMB 39 GENERATED NSCP 2015 DRIFT CHECK 24
247. 9 0.9 4 1.0
248. LOAD COMB 40 GENERATED NSCP 2015 DRIFT CHECK 25
249. 9 0.9 5 1.0
250. LOAD COMB 41 GENERATED NSCP 2015 DRIFT CHECK 26
251. 9 0.9 6 1.0

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 13 of 131


Thursday, May 30, 2024, 01:40 AM

252. LOAD COMB 42 GENERATED NSCP 2015 DRIFT CHECK 27


253. 9 0.9 7 1.0
254. LOAD COMB 43 GENERATED NSCP 2015 DRIFT CHECK 28
255. 9 0.9 8 1.0
256. LOAD COMB 44 GENERATED NSCP 2015 USD/LRFD +EV 1
257. 9 1.4
258. LOAD COMB 45 GENERATED NSCP 2015 USD/LRFD +EV 2
259. 9 1.2 10 1.6 11 1.6
260. LOAD COMB 46 GENERATED NSCP 2015 USD/LRFD +EV 3
261. 9 1.2 10 0.5 11 0.5
262. LOAD COMB 47 GENERATED NSCP 2015 USD/LRFD +EV 4
263. 9 1.2 12 0.5
264. LOAD COMB 48 GENERATED NSCP 2015 USD/LRFD +EV 5
265. 9 1.2 13 0.5
266. LOAD COMB 49 GENERATED NSCP 2015 USD/LRFD +EV 6
267. 9 1.2 14 0.5
268. LOAD COMB 50 GENERATED NSCP 2015 USD/LRFD +EV 7
269. 9 1.2 15 0.5
270. LOAD COMB 51 GENERATED NSCP 2015 USD/LRFD +EV 8
271. 9 1.2 10 0.5 11 0.5 12 1.0
272. LOAD COMB 52 GENERATED NSCP 2015 USD/LRFD +EV 9
273. 9 1.2 10 0.5 11 0.5 13 1.0
274. LOAD COMB 53 GENERATED NSCP 2015 USD/LRFD +EV 10
275. 9 1.2 10 0.5 11 0.5 14 1.0
276. LOAD COMB 54 GENERATED NSCP 2015 USD/LRFD +EV 11
277. 9 1.2 10 0.5 11 0.5 15 1.0
278. LOAD COMB 55 GENERATED NSCP 2015 USD/LRFD +EV 12
279. 9 0.9 12 1.0
280. LOAD COMB 56 GENERATED NSCP 2015 USD/LRFD +EV 13
281. 9 0.9 13 1.0
282. LOAD COMB 57 GENERATED NSCP 2015 USD/LRFD +EV 14
283. 9 0.9 14 1.0
284. LOAD COMB 58 GENERATED NSCP 2015 USD/LRFD +EV 15
285. 9 0.9 15 1.0
286. LOAD COMB 59 GENERATED NSCP 2015 USD/LRFD +EV 16
287. 9 1.68 10 0.5 11 0.5 1 1.0
288. LOAD COMB 60 GENERATED NSCP 2015 USD/LRFD +EV 17
289. 9 1.68 10 0.5 11 0.5 2 1.0
290. LOAD COMB 61 GENERATED NSCP 2015 USD/LRFD +EV 18
291. 9 1.68 10 0.5 11 0.5 3 1.0
292. LOAD COMB 62 GENERATED NSCP 2015 USD/LRFD +EV 19
293. 9 1.68 10 0.5 11 0.5 4 1.0
294. LOAD COMB 63 GENERATED NSCP 2015 USD/LRFD +EV 20
295. 9 1.68 10 0.5 11 0.5 5 1.0
296. LOAD COMB 64 GENERATED NSCP 2015 USD/LRFD +EV 21
297. 9 1.68 10 0.5 11 0.5 6 1.0
298. LOAD COMB 65 GENERATED NSCP 2015 USD/LRFD +EV 22
299. 9 1.68 10 0.5 11 0.5 7 1.0
300. LOAD COMB 66 GENERATED NSCP 2015 USD/LRFD +EV 23
301. 9 1.68 10 0.5 11 0.5 8 1.0
302. LOAD COMB 67 GENERATED NSCP 2015 USD/LRFD +EV 24
303. 9 1.38 1 1.0
304. LOAD COMB 68 GENERATED NSCP 2015 USD/LRFD +EV 25
305. 9 1.38 2 1.0
306. LOAD COMB 69 GENERATED NSCP 2015 USD/LRFD +EV 26
307. 9 1.38 3 1.0
308. LOAD COMB 70 GENERATED NSCP 2015 USD/LRFD +EV 27
309. 9 1.38 4 1.0
310. LOAD COMB 71 GENERATED NSCP 2015 USD/LRFD +EV 28

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 14 of 131


Thursday, May 30, 2024, 01:40 AM

311. 9 1.38 5 1.0


312. LOAD COMB 72 GENERATED NSCP 2015 USD/LRFD +EV 29
313. 9 1.38 6 1.0
314. LOAD COMB 73 GENERATED NSCP 2015 USD/LRFD +EV 30
315. 9 1.38 7 1.0
316. LOAD COMB 74 GENERATED NSCP 2015 USD/LRFD +EV 31
317. 9 1.38 8 1.0
318. LOAD COMB 75 GENERATED NSCP 2015 USD/LRFD +EV 32
319. 9 0.42 1 1.0
320. LOAD COMB 76 GENERATED NSCP 2015 USD/LRFD +EV 33
321. 9 0.42 2 1.0
322. LOAD COMB 77 GENERATED NSCP 2015 USD/LRFD +EV 34
323. 9 0.42 3 1.0
324. LOAD COMB 78 GENERATED NSCP 2015 USD/LRFD +EV 35
325. 9 0.42 4 1.0
326. LOAD COMB 79 GENERATED NSCP 2015 USD/LRFD +EV 36
327. 9 0.42 5 1.0
328. LOAD COMB 80 GENERATED NSCP 2015 USD/LRFD +EV 37
329. 9 0.42 6 1.0
330. LOAD COMB 81 GENERATED NSCP 2015 USD/LRFD +EV 38
331. 9 0.42 7 1.0
332. LOAD COMB 82 GENERATED NSCP 2015 USD/LRFD +EV 39
333. 9 0.42 8 1.0
334. PERFORM ANALYSIS
WARNING : EXTREME SOFT STOREY DETECTED.
STOREY 1 AT 3.900 METE IS SOFT ALONG GLOBAL Z DIRECTION.

VERTICAL STRUCTURAL IRREGULARITIES : SOFT STORY CHECK - ASCE/SEI 7-05


-------- ---------- --------------

STORY FL. LEVEL IN METE S T A T U S


----- ----------------- --------------------
X Z

1 3.90 OK EXTREME SOFT


2 6.70 OK OK
3 9.50 OK OK
4 12.30 OK OK
5 15.10 OK OK

335. LOAD LIST 16 TO 43


336. PRINT STORY DRIFT 0.004200

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATU


-----------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 23

1 0.00 16 0.0000 0.0000 0.0000 0.0000 L /999999 PAS


17 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
18 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
19 0.0000 0.0000 0.0000 0.0000 L /999999 PAS

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 15 of 131


Thursday, May 30, 2024, 01:40 AM

21 0.0000 0.0000 0.0000 0.0000 L /999999 PAS


22 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
23 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
24 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
25 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
26 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
27 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
28 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
29 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
30 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
31 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
32 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
33 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
34 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
35 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
36 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
37 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
38 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
39 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
40 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
41 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
42 0.0000 0.0000 0.0000 0.0000 L /999999 PAS
43 0.0000 0.0000 0.0000 0.0000 L /999999 PAS

2 3.90 16 0.4934 -0.0049 0.4934 0.0049 L / 790 PAS


17 -0.5224 0.0111 0.5224 0.0111 L / 746 PAS
18 -0.0088 0.8498 0.0088 0.8498 L / 459 PAS
19 0.0064 -0.8063 0.0064 0.8063 L / 484 PAS
20 0.9876 -0.0122 0.9876 0.0122 L / 395 PAS
21 -1.0439 0.0197 1.0439 0.0197 L / 373 PAS
22 -0.0166 1.6971 0.0166 1.6971 L / 230 *FAI
23 0.0137 -1.6151 0.0137 1.6151 L / 241 PAS
24 0.5877 -0.0067 0.5877 0.0067 L / 663 PAS
25 0.5903 -0.0068 0.5903 0.0068 L / 661 PAS
26 -0.5928 0.0134 0.5928 0.0134 L / 658 PAS
27 -0.5903 0.0133 0.5903 0.0133 L / 661 PAS
28 -0.0120 1.0601 0.0120 1.0601 L / 368 PAS
29 -0.0101 1.0601 0.0101 1.0601 L / 368 PAS
30 0.0075 -1.0535 0.0075 1.0535 L / 370 PAS
31 0.0094 -1.0535 0.0094 1.0535 L / 370 PAS
32 0.9881 -0.0133 0.9881 0.0133 L / 394 PAS

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATU


-----------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 23

33 -1.0435 0.0186 1.0435 0.0186 L / 374 PAS


34 -0.0162 1.6960 0.0162 1.6960 L / 230 *FAI
35 0.0141 -1.6162 0.0141 1.6162 L / 241 PAS
36 0.5882 -0.0078 0.5882 0.0078 L / 663 PAS
37 0.5907 -0.0079 0.5907 0.0079 L / 660 PAS
38 -0.5924 0.0123 0.5924 0.0123 L / 658 PAS
39 -0.5898 0.0122 0.5898 0.0122 L / 661 PAS
40 -0.0115 1.0590 0.0115 1.0590 L / 368 PAS

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 16 of 131


Thursday, May 30, 2024, 01:40 AM

42 0.0080 -1.0546 0.0080 1.0546 L / 370 PAS


43 0.0099 -1.0547 0.0099 1.0547 L / 370 PAS

3 6.70 16 0.8641 -0.0045 0.3708 0.0004 L / 755 PAS


17 -0.9234 0.0361 0.4010 0.0250 L / 698 PAS
18 -0.0211 1.2522 0.0123 0.4023 L / 696 PAS
19 0.0032 -1.1605 0.0031 0.3543 L / 790 PAS
20 1.7349 -0.0230 0.7473 0.0108 L / 374 PAS
21 -1.8401 0.0582 0.7962 0.0384 L / 351 PAS
22 -0.0355 2.4903 0.0189 0.7931 L / 353 PAS
23 0.0132 -2.3351 0.0005 0.7201 L / 389 PAS
24 1.0885 -0.0085 0.5008 0.0018 L / 559 PAS
25 1.0638 -0.0049 0.4735 0.0018 L / 591 PAS
26 -1.0809 0.0392 0.4881 0.0258 L / 573 PAS
27 -1.1057 0.0427 0.5154 0.0294 L / 543 PAS
28 -0.0247 1.6345 0.0127 0.5743 L / 487 PAS
29 -0.0432 1.6371 0.0332 0.5771 L / 485 PAS
30 0.0261 -1.6029 0.0186 0.5494 L / 509 PAS
31 0.0076 -1.6002 0.0019 0.5467 L / 512 PAS
32 1.7378 -0.0284 0.7497 0.0150 L / 373 PAS
33 -1.8373 0.0528 0.7938 0.0341 L / 353 PAS
34 -0.0327 2.4848 0.0165 0.7888 L / 355 PAS
35 0.0160 -2.3406 0.0019 0.7244 L / 386 PAS
36 1.0914 -0.0139 0.5032 0.0061 L / 556 PAS
37 1.0666 -0.0104 0.4759 0.0025 L / 588 PAS
38 -1.0781 0.0337 0.4857 0.0215 L / 576 PAS
39 -1.1028 0.0373 0.5130 0.0251 L / 546 PAS
40 -0.0219 1.6290 0.0103 0.5700 L / 491 PAS
41 -0.0404 1.6317 0.0308 0.5728 L / 489 PAS
42 0.0290 -1.6083 0.0210 0.5537 L / 505 PAS
43 0.0104 -1.6057 0.0005 0.5510 L / 508 PAS

4 9.50 16 1.1395 -0.0046 0.2754 0.0002 L / 1016 PAS


17 -1.2383 0.0526 0.3149 0.0165 L / 889 PAS
18 -0.0440 1.5635 0.0229 0.3113 L / 899 PAS
19 0.0088 -1.4345 0.0056 0.2739 L / 1022 PAS
20 2.2941 -0.0307 0.5592 0.0078 L / 500 PAS
21 -2.4616 0.0837 0.6215 0.0256 L / 450 PAS
22 -0.0728 3.1054 0.0373 0.6152 L / 455 PAS

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATU


-----------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 23

23 0.0327 -2.8904 0.0195 0.5553 L / 504 PAS


24 1.5194 -0.0127 0.4308 0.0042 L / 650 PAS
25 1.5275 -0.0104 0.4637 0.0055 L / 604 PAS
26 -1.5658 0.0612 0.4848 0.0220 L / 577 PAS
27 -1.5576 0.0634 0.4519 0.0207 L / 619 PAS
28 -0.0587 2.0995 0.0340 0.4651 L / 602 PAS
29 -0.0526 2.1012 0.0093 0.4641 L / 603 PAS
30 0.0143 -2.0505 0.0118 0.4476 L / 625 PAS
31 0.0205 -2.0488 0.0129 0.4486 L / 624 PAS
32 2.3004 -0.0385 0.5627 0.0101 L / 497 PAS

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 17 of 131


Thursday, May 30, 2024, 01:40 AM

34 -0.0666 3.0976 0.0339 0.6128 L / 457 PAS


35 0.0390 -2.8982 0.0230 0.5576 L / 502 PAS
36 1.5257 -0.0205 0.4343 0.0066 L / 645 PAS
37 1.5338 -0.0182 0.4672 0.0079 L / 599 PAS
38 -1.5595 0.0534 0.4814 0.0196 L / 581 PAS
39 -1.5513 0.0556 0.4485 0.0184 L / 624 PAS
40 -0.0524 2.0917 0.0306 0.4627 L / 605 PAS
41 -0.0463 2.0934 0.0059 0.4617 L / 606 PAS
42 0.0206 -2.0583 0.0083 0.4500 L / 622 PAS
43 0.0268 -2.0566 0.0164 0.4509 L / 621 PAS

5 12.30 16 1.3578 -0.0175 0.2183 0.0129 L / 1283 PAS


17 -1.4816 0.0543 0.2433 0.0017 L / 1151 PAS
18 -0.0579 1.7579 0.0140 0.1944 L / 1440 PAS
19 0.0086 -1.6243 0.0002 0.1898 L / 1475 PAS
20 2.7367 -0.0517 0.4425 0.0209 L / 633 PAS
21 -2.9421 0.0920 0.4805 0.0082 L / 583 PAS
22 -0.0948 3.4991 0.0219 0.3936 L / 711 PAS
23 0.0383 -3.2652 0.0056 0.3748 L / 747 PAS
24 1.8948 -0.0312 0.3755 0.0185 L / 746 PAS
25 1.9043 -0.0286 0.3768 0.0181 L / 743 PAS
26 -1.9579 0.0659 0.3922 0.0048 L / 714 PAS
27 -1.9485 0.0685 0.3909 0.0051 L / 716 PAS
28 -0.0786 2.4393 0.0198 0.3398 L / 824 PAS
29 -0.0714 2.4413 0.0189 0.3400 L / 823 PAS
30 0.0178 -2.4039 0.0034 0.3534 L / 792 PAS
31 0.0249 -2.4019 0.0044 0.3531 L / 793 PAS
32 2.7455 -0.0571 0.4451 0.0186 L / 629 PAS
33 -2.9333 0.0865 0.4779 0.0106 L / 586 PAS
34 -0.0859 3.4936 0.0194 0.3960 L / 707 PAS
35 0.0472 -3.2707 0.0082 0.3724 L / 752 PAS
36 1.9037 -0.0366 0.3780 0.0161 L / 740 PAS
37 1.9132 -0.0340 0.3793 0.0158 L / 738 PAS
38 -1.9491 0.0605 0.3896 0.0071 L / 718 PAS
39 -1.9396 0.0631 0.3883 0.0075 L / 721 PAS
40 -0.0697 2.4339 0.0173 0.3421 L / 818 PAS

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATU


-----------------------------------------------------------------------------------------
(METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 23

41 -0.0625 2.4358 0.0163 0.3424 L / 818 PAS


42 0.0266 -2.4093 0.0060 0.3510 L / 797 PAS
43 0.0338 -2.4074 0.0070 0.3508 L / 798 PAS

6 15.10 16 1.4790 -0.0288 0.1212 0.0113 L / 2309 PAS


17 -1.6212 0.0532 0.1396 0.0011 L / 2006 PAS
18 -0.0685 1.8423 0.0106 0.0844 L / 3316 PAS
19 0.0066 -1.7128 0.0021 0.0885 L / 3163 PAS
20 2.9845 -0.0691 0.2478 0.0174 L / 1130 PAS
21 -3.2159 0.0950 0.2738 0.0030 L / 1023 PAS
22 -0.1106 3.6732 0.0158 0.1741 L / 1608 PAS
23 0.0396 -3.4370 0.0012 0.1718 L / 1630 PAS
24 2.1402 -0.0472 0.2454 0.0160 L / 1141 PAS

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 18 of 131


Thursday, May 30, 2024, 01:40 AM

26 -2.2175 0.0662 0.2596 0.0003 L / 1079 PAS


27 -2.2077 0.0701 0.2592 0.0016 L / 1080 PAS
28 -0.0939 2.6336 0.0153 0.1943 L / 1441 PAS
29 -0.0865 2.6365 0.0151 0.1953 L / 1434 PAS
30 0.0189 -2.6136 0.0012 0.2097 L / 1335 PAS
31 0.0264 -2.6107 0.0014 0.2088 L / 1341 PAS
32 2.9957 -0.0720 0.2502 0.0149 L / 1119 PAS
33 -3.2047 0.0921 0.2714 0.0056 L / 1031 PAS
34 -0.0994 3.6703 0.0134 0.1767 L / 1585 PAS
35 0.0508 -3.4399 0.0036 0.1692 L / 1654 PAS
36 2.1514 -0.0501 0.2477 0.0135 L / 1130 PAS
37 2.1612 -0.0462 0.2480 0.0122 L / 1129 PAS
38 -2.2063 0.0633 0.2572 0.0028 L / 1088 PAS
39 -2.1965 0.0672 0.2569 0.0041 L / 1090 PAS
40 -0.0827 2.6307 0.0130 0.1968 L / 1422 PAS
41 -0.0753 2.6336 0.0127 0.1978 L / 1415 PAS
42 0.0301 -2.6165 0.0035 0.2072 L / 1351 PAS
43 0.0376 -2.6136 0.0038 0.2062 L / 1358 PAS
337. LOAD LIST 44 TO 82
338. START CONCRETE DESIGN
339. CODE ACI
340. CLB 0.04 MEMB 7 TO 13 23 TO 31 41 45 47 TO 52 63 65 67 TO 72 83 85 87 TO 110
341. CLS 0.04 MEMB 1 TO 6 14 TO 19 32 TO 37 53 TO 58 73 TO 78
342. CLT 0.04 MEMB 7 TO 13 23 TO 31 41 45 47 TO 52 63 65 67 TO 72 83 85 87 TO 110
343. FC 21000 ALL
344. FYMAIN 275000 ALL
345. FYSEC 230000 ALL
346. MAXMAIN 25 ALL
347. MINMAIN 16 ALL
348. MINSEC 10 ALL
349. TRACK 2 ALL
350. DESIGN BEAM 7 TO 13 23 TO 31 41 45 47 TO 52 63 65 67 TO 72 83 85 87 TO 110

ACI 318-11 BEAM NO. 7 DESIGN RESULTS


=============================================

LEN - 4900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 4 - 25MM 0. 4900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 159.26 KN-MET AT 4900.MM, LOAD 56|
| REQD STEEL= 1626.MM2, RHO=0.0124, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

2 438. 4 - 25MM 0. 3494. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 173.68 KN-MET AT 0.MM, LOAD 52|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 19 of 131


Thursday, May 30, 2024, 01:40 AM

| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |


| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

3 438. 4 - 25MM 1202. 4900. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 157.13 KN-MET AT 4900.MM, LOAD 51|
| REQD STEEL= 1602.MM2, RHO=0.0122, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1450./ 1802. 143./ 174. 55/ 52


408. 1209./ 1441. 121./ 142. 55/ 52
817. 970./ 1105. 99./ 111. 55/ 52
1225. 734./ 793. 76./ 81. 51/ 56
1633. 503./ 503. 53./ 53. 51/ 56
2042. 273./ 228. 29./ 24. 51/ 56
2450. 64./ 0. 7./ 0. 66/ 0
2858. 300./ 204. 32./ 22. 52/ 55
3267. 560./ 451. 58./ 47. 52/ 55
3675. 820./ 712. 84./ 74. 52/ 55
4083. 1084./ 989. 109./ 100. 56/ 51
4492. 1357./ 1289. 135./ 128. 56/ 51
4900. 1634./ 1610. 159./ 157. 56/ 51

B E A M N O. 7 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 42.44 KNS Vc= 102.11 KNS Vs= 0.00 KNS
Tu= 0.27 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 48
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 2010. MM

AT END SUPPORT - Vu= 38.78 KNS Vc= 102.23 KNS Vs= 0.00 KNS
Tu= 0.41 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 47
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 2010. MM

___ 7J____________________ 4900X 300X 500_____________________ 8J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TOo3494|438.1202.TO|4900 | | | | | | | | |
| 11*10c/c219 | | | | | | | | | | | | 11*10c/c219 | |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 20 of 131


Thursday, May 30, 2024, 01:40 AM

| 4No25 H |62.| 0.TO 4900| | | | | | | | | | | | | |


||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 8 DESIGN RESULTS


=============================================

LEN - 4700. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 4 - 25MM 0. 4700. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 179.09 KN-MET AT 4700.MM, LOAD 56|
| REQD STEEL= 1856.MM2, RHO=0.0141, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2042. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 193.73 KN-MET, LOADING 52

2 438. 4 - 25MM 1093. 4700. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 181.90 KN-MET AT 4700.MM, LOAD 51|
| REQD STEEL= 1889.MM2, RHO=0.0144, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1727./ 2042. 167./ 194. 55/ 52


392. 1428./ 1634. 141./ 159. 55/ 52

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 21 of 131


Thursday, May 30, 2024, 01:40 AM

783. 1136./ 1256. 114./ 125. 55/ 52


1175. 850./ 904. 87./ 92. 55/ 52
1567. 572./ 576. 60./ 60. 51/ 56
1958. 299./ 267. 32./ 28. 51/ 56
2350. 52./ 0. 6./ 0. 66/ 0
2742. 321./ 251. 34./ 27. 52/ 55
3133. 615./ 540. 64./ 56. 52/ 55
3525. 913./ 844. 93./ 87. 52/ 55
3917. 1222./ 1172. 122./ 118. 56/ 51
4308. 1539./ 1522. 151./ 149. 56/ 51
4700. 1866./ 1899. 179./ 182. 56/ 51

___ 9J____________________ 4700X 300X 500_____________________ 11J____


| |
| ==========================================================||
| 4No25 H 438.1093.TO 4700 |
| |
| 4No25 H 62. 0.TO 4700 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| | | | | oooo | | oooo | | oooo | | oooo |
| | | | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 9 DESIGN RESULTS


=============================================

LEN - 4400. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2162. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX POS MOMENT = 203.47 KN-MET, LOADING 56

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2322. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 216.14 KN-MET, LOADING 52

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2239. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 209.63 KN-MET, LOADING 51

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 22 of 131


Thursday, May 30, 2024, 01:40 AM

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 2085./ 2322. 197./ 216. 55/ 52


367. 1710./ 1855. 166./ 178. 55/ 52
733. 1350./ 1425. 134./ 141. 55/ 52
1100. 1002./ 1026. 102./ 104. 55/ 52
1467. 668./ 655. 69./ 68. 51/ 56
1833. 344./ 307. 36./ 33. 51/ 56
2200. 48./ 0. 5./ 0. 66/ 0
2567. 357./ 299. 38./ 32. 52/ 55
2933. 693./ 637. 72./ 66. 52/ 55
3300. 1038./ 994. 105./ 101. 52/ 55
3667. 1396./ 1377. 138./ 136. 56/ 51
4033. 1771./ 1791. 171./ 173. 56/ 51
4400. 2162./ 2239. 203./ 210. 56/ 51

___ 10J____________________ 4400X 300X 500_____________________ 12J____


| |
| |
| |
| |
| |
| |
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 10 DESIGN RESULTS


=============================================

LEN - 2907. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 4 - 25MM 0. 2907. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 175.09 KN-MET AT 0.MM, LOAD 57|
| REQD STEEL= 1809.MM2, RHO=0.0138, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 23 of 131


Thursday, May 30, 2024, 01:40 AM

2 438. 4 - 25MM 0. 2906. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 174.00 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 1796.MM2, RHO=0.0137, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

3 438. 3 - 25MM 800. 2907. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 128.82 KN-MET AT 2907.MM, LOAD 57|
| REQD STEEL= 1287.MM2, RHO=0.0098, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 89. MMS |
| REQD. DEVELOPMENT LENGTH = 758. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 145492.4 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1819./ 1806. 175./ 174. 57/ 54


242. 1538./ 1506. 151./ 148. 57/ 54
484. 1266./ 1221. 126./ 122. 57/ 54
727. 1002./ 950. 102./ 97. 57/ 54
969. 747./ 693. 77./ 72. 53/ 58
1211. 499./ 446. 52./ 47. 53/ 58
1453. 255./ 208. 27./ 22. 53/ 58
1696. 37./ 0. 4./ 0. 60/ 0
1938. 256./ 231. 27./ 25. 54/ 57
2180. 489./ 480. 51./ 50. 54/ 57
2422. 727./ 740. 75./ 76. 54/ 57
2665. 970./ 1010. 99./ 102. 54/ 57
2907. 1217./ 1293. 122./ 129. 54/ 57

B E A M N O. 10 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 47.51 KNS Vc= 104.87 KNS Vs= 0.00 KNS
Tu= 0.21 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 1013. MM

AT END SUPPORT - Vu= 56.11 KNS Vc= 113.99 KNS Vs= 0.00 KNS
Tu= 0.21 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 1013. MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 24 of 131


Thursday, May 30, 2024, 01:40 AM

___ 7J____________________ 2906X 300X 500_____________________ 9J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TO32906|H 438. 800.TO 2907 | | | | | |
| 6*10c/c219 | | | | | | | 6*10c/c219 | |
| 4No25 H 62.| 0.TO 2907| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | ooo |
| 4#25 | | 4#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 11 DESIGN RESULTS


=============================================

LEN - 3463. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 4 - 25MM 0. 3463. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 158.59 KN-MET AT 3463.MM, LOAD 58|
| REQD STEEL= 1618.MM2, RHO=0.0123, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

2 440. 4 - 20MM 0. 1805. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 117.44 KN-MET AT 0.MM, LOAD 58|
| REQD STEEL= 1156.MM2, RHO=0.0088, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

3 438. 4 - 25MM 135. 3463. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 173.75 KN-MET AT 3463.MM, LOAD 53|
| REQD STEEL= 1793.MM2, RHO=0.0137, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 25 of 131


Thursday, May 30, 2024, 01:40 AM

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1214./ 1170. 122./ 117. 53/ 58


289. 972./ 911. 99./ 93. 53/ 58
577. 735./ 664. 76./ 69. 53/ 58
866. 501./ 427. 52./ 45. 53/ 58
1154. 271./ 199. 29./ 21. 53/ 58
1443. 58./ 0. 6./ 0. 63/ 0
1732. 248./ 195. 26./ 21. 54/ 57
2020. 467./ 432. 49./ 45. 54/ 57
2309. 690./ 678. 71./ 70. 54/ 57
2597. 915./ 936. 93./ 95. 54/ 57
2886. 1146./ 1208. 115./ 121. 58/ 53
3174. 1384./ 1497. 137./ 147. 58/ 53
3463. 1626./ 1803. 159./ 174. 58/ 53

B E A M N O. 11 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 37.56 KNS Vc= 99.88 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 1292. MM

AT END SUPPORT - Vu= 48.52 KNS Vc= 99.88 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 1292. MM

___ 9J____________________ 3463X 300X 500_____________________ 10J____


| |
||=========================================================================||
| 4No205HH440.. 10.TOO18053| | | | | | | | | |
| 7*10c/c219 | | | | | | | | 7*10c/c219 | |
| 4No25|H 62. 0.TO 3463 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 26 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 BEAM NO. 12 DESIGN RESULTS


=============================================

LEN - 2900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 4 - 25MM 0. 2900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 170.24 KN-MET AT 0.MM, LOAD 57|
| REQD STEEL= 1752.MM2, RHO=0.0134, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

2 438. 4 - 25MM 0. 2900. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 167.07 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 1716.MM2, RHO=0.0131, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

3 440. 4 - 20MM 1162. 2900. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 124.54 KN-MET AT 2900.MM, LOAD 57|
| REQD STEEL= 1232.MM2, RHO=0.0093, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1762./ 1724. 170./ 167. 57/ 54


242. 1491./ 1439. 147./ 142. 57/ 54
483. 1229./ 1168. 123./ 117. 57/ 54
725. 975./ 909. 99./ 93. 57/ 54
967. 729./ 664. 75./ 69. 53/ 58
1208. 488./ 428. 51./ 45. 53/ 58
1450. 253./ 201. 27./ 21. 53/ 58
1692. 36./ 0. 4./ 0. 61/ 0
1933. 245./ 219. 26./ 23. 54/ 57
2175. 467./ 461. 49./ 48. 54/ 57
2417. 694./ 712. 72./ 74. 54/ 57

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 27 of 131


Thursday, May 30, 2024, 01:40 AM

2658. 925./ 973. 94./ 99. 54/ 57


2900. 1160./ 1246. 117./ 125. 54/ 57

B E A M N O. 12 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 45.90 KNS Vc= 104.52 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 1010. MM

AT END SUPPORT - Vu= 54.46 KNS Vc= 113.66 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 219. MM C/C FOR 1010. MM

___ 8J____________________ 2900X 300X 500_____________________ 11J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TO 2900| 4No20 H 440.1162.TO|2900 | | | | |
| 6*10c/c219 | | | | | | | 6*10c/c219 | |
| 4No25 H 62.| 0.TO 2900| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | | | |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 13 DESIGN RESULTS


=============================================

LEN - 3450. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 5 - 20MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 151.73 KN-MET AT 3450.MM, LOAD 58|
| REQD STEEL= 1530.MM2, RHO=0.0116, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 46. MMS |
| REQD. DEVELOPMENT LENGTH = 944. MMS |
|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 28 of 131


Thursday, May 30, 2024, 01:40 AM

Cracked Moment of Inertia Iz at above location = 154405.4 cm^4

2 440. 4 - 20MM 0. 1801. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 111.81 KN-MET AT 0.MM, LOAD 58|
| REQD STEEL= 1097.MM2, RHO=0.0083, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

3 438. 4 - 25MM 129. 3450. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 169.77 KN-MET AT 3450.MM, LOAD 53|
| REQD STEEL= 1747.MM2, RHO=0.0133, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1179./ 1109. 118./ 112. 53/ 58


287. 945./ 864. 96./ 88. 53/ 58
575. 715./ 628. 74./ 65. 53/ 58
862. 487./ 403. 51./ 42. 53/ 58
1150. 263./ 185. 28./ 20. 53/ 58
1437. 57./ 0. 6./ 0. 64/ 0
1725. 242./ 191. 26./ 20. 54/ 57
2012. 451./ 422. 47./ 44. 54/ 57
2300. 662./ 662. 69./ 69. 54/ 57
2587. 875./ 913. 90./ 93. 54/ 57
2875. 1095./ 1178. 110./ 118. 58/ 53
3162. 1319./ 1459. 131./ 144. 58/ 53
3450. 1548./ 1756. 152./ 170. 58/ 53

B E A M N O. 13 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 42.89 KNS Vc= 108.89 KNS Vs= 0.00 KNS
Tu= 0.49 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 50
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1285. MM

AT END SUPPORT - Vu= 47.69 KNS Vc= 103.86 KNS Vs= 0.00 KNS
Tu= 0.19 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1285. MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 29 of 131


Thursday, May 30, 2024, 01:40 AM

___ 11J____________________ 3449X 300X 500_____________________ 12J____


| |
||=========================================================================||
| 4No205HH440.. 10.TOO18010| | | | | | | | | |
| 7*10c/c220 | | | | | | | | 7*10c/c220 | |
| 5No20|H 60. 0.TO 3450 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | | | |
| 5#20 | | 5#20 | | 5#20 | | 5#20 | | 5#20 | | 5#20 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 23 DESIGN RESULTS


=============================================

LEN - 2907. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 4 - 20MM 0. 2907. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 111.09 KN-MET AT 0.MM, LOAD 57|
| REQD STEEL= 1089.MM2, RHO=0.0083, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

2 440. 4 - 20MM 0. 2907. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 120.49 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 1189.MM2, RHO=0.0090, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 30 of 131


Thursday, May 30, 2024, 01:40 AM

0. 1102./ 1203. 111./ 120. 57/ 54


242. 953./ 974. 97./ 99. 57/ 54
484. 804./ 757. 83./ 78. 57/ 54
727. 667./ 564. 69./ 59. 53/ 58
969. 523./ 382. 55./ 40. 53/ 58
1211. 373./ 210. 39./ 22. 53/ 58
1453. 220./ 61. 23./ 7. 63/ 82
1696. 152./ 3. 16./ 0. 66/ 79
1938. 271./ 158. 29./ 17. 54/ 57
2180. 402./ 344. 42./ 36. 54/ 57
2422. 526./ 540. 55./ 56. 54/ 57
2665. 657./ 758. 68./ 78. 58/ 53
2907. 790./ 990. 81./ 101. 58/ 53

B E A M N O. 23 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 50.50 KNS Vc= 105.58 KNS Vs= 0.00 KNS
Tu= 0.60 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 50
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1013. MM

AT END SUPPORT - Vu= 52.10 KNS Vc= 109.76 KNS Vs= 0.00 KNS
Tu= 1.37 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1013. MM

___ 13J____________________ 2906X 300X 500_____________________ 15J____


| |
||=========================================================================||
| 4No20 H 440.| 0.TO 2907| | | | | | | | |
| 6*10c/c220 | | | | | | | 6*10c/c220 | |
| 4No20 H 60.| 0.TO 2907| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 24 DESIGN RESULTS


=============================================

LEN - 3463. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 31 of 131


Thursday, May 30, 2024, 01:40 AM

(MM) (MM) (MM) STA END


_____________________________________________________________________

1 60. 3 - 20MM 0. 3463. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 85.99 KN-MET AT 3463.MM, LOAD 58|
| REQD STEEL= 830.MM2, RHO=0.0063, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

2 438. 3 - 25MM 0. 3463. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 140.51 KN-MET AT 3463.MM, LOAD 53|
| REQD STEEL= 1415.MM2, RHO=0.0108, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 89. MMS |
| REQD. DEVELOPMENT LENGTH = 758. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 145492.4 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 838./ 880. 86./ 90. 57/ 54


289. 699./ 670. 72./ 69. 57/ 54
577. 569./ 483. 59./ 51. 53/ 58
866. 436./ 308. 46./ 33. 53/ 58
1154. 293./ 144. 31./ 15. 53/ 58
1443. 159./ 10. 17./ 1. 63/ 82
1732. 190./ 53. 20./ 6. 66/ 79
2020. 305./ 227. 32./ 24. 54/ 57
2309. 416./ 418. 44./ 44. 54/ 57
2597. 525./ 636. 55./ 66. 58/ 53
2886. 634./ 880. 66./ 90. 58/ 53
3174. 738./ 1143. 76./ 115. 58/ 53
3463. 839./ 1422. 86./ 141. 58/ 53

B E A M N O. 24 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 40.24 KNS Vc= 100.46 KNS Vs= 0.00 KNS
Tu= 0.66 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 50
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1292. MM

AT END SUPPORT - Vu= 54.53 KNS Vc= 101.40 KNS Vs= 0.00 KNS
Tu= 0.34 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 32 of 131


Thursday, May 30, 2024, 01:40 AM

PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1292. MM

___ 15J____________________ 3463X 300X 500_____________________ 16J____


| |
||=========================================================================||
| 3No25|H 438. 0.TO 3463 | | | | | | | | | |
| 7*10c/c220 | | | | | | | | 7*10c/c220 | |
| 3No20|H 60. 0.TO 3463 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | | | |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 25 DESIGN RESULTS


=============================================

LEN - 2900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 5 - 16MM 0. 2900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 101.86 KN-MET AT 0.MM, LOAD 57|
| REQD STEEL= 988.MM2, RHO=0.0074, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 47. MMS |
| REQD. DEVELOPMENT LENGTH = 591. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 111945.9 cm^4

2 440. 4 - 20MM 0. 2900. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 103.36 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 1009.MM2, RHO=0.0076, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 33 of 131


Thursday, May 30, 2024, 01:40 AM

0. 1004./ 1020. 102./ 103. 57/ 54


242. 865./ 832. 88./ 85. 57/ 54
483. 725./ 656. 75./ 68. 53/ 58
725. 590./ 495. 61./ 52. 53/ 58
967. 451./ 341. 47./ 36. 53/ 58
1208. 309./ 194. 33./ 21. 53/ 58
1450. 165./ 63. 18./ 7. 64/ 81
1692. 114./ 14. 12./ 1. 65/ 80
1933. 232./ 155. 25./ 17. 54/ 57
2175. 361./ 313. 38./ 33. 54/ 57
2417. 486./ 479. 51./ 50. 54/ 57
2658. 606./ 652. 63./ 68. 54/ 57
2900. 730./ 841. 75./ 86. 58/ 53

B E A M N O. 25 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 40.48 KNS Vc= 104.47 KNS Vs= 0.00 KNS
Tu= 1.45 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 50
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1010. MM

AT END SUPPORT - Vu= 41.08 KNS Vc= 108.05 KNS Vs= 0.00 KNS
Tu= 1.15 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1010. MM

___ 14J____________________ 2900X 300X 500_____________________ 17J____


| |
||=========================================================================||
| 4No20 H 440.| 0.TO 2900| | | | | | | | |
| 6*10c/c221 | | | | | | | 6*10c/c221 | |
| 5No16 H 58.| 0.TO 2900| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | | | |
| 5#16 | | 5#16 | | 5#16 | | 5#16 | | 5#16 | | 5#16 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 26 DESIGN RESULTS


=============================================

LEN - 3450. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 34 of 131


Thursday, May 30, 2024, 01:40 AM

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 83.01 KN-MET AT 0.MM, LOAD 53|
| REQD STEEL= 800.MM2, RHO=0.0061, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 93115.6 cm^4

2 440. 4 - 20MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 123.45 KN-MET AT 3450.MM, LOAD 53|
| REQD STEEL= 1221.MM2, RHO=0.0092, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 808./ 728. 83./ 75. 53/ 58


287. 680./ 567. 70./ 59. 53/ 58
575. 545./ 416. 57./ 44. 53/ 58
862. 405./ 272. 43./ 29. 53/ 58
1150. 259./ 136. 28./ 15. 53/ 58
1437. 118./ 22. 13./ 2. 64/ 81
1725. 131./ 63. 14./ 7. 65/ 57
2012. 241./ 222. 26./ 24. 54/ 57
2300. 348./ 392. 37./ 41. 58/ 53
2587. 459./ 582. 48./ 61. 58/ 53
2875. 566./ 785. 59./ 81. 58/ 53
3162. 669./ 1002. 69./ 102. 58/ 53
3450. 767./ 1235. 79./ 123. 58/ 53

B E A M N O. 26 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 46.91 KNS Vc= 100.38 KNS Vs= 0.00 KNS
Tu= 0.91 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 53
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

AT END SUPPORT - Vu= 44.61 KNS Vc= 101.24 KNS Vs= 0.00 KNS
Tu= 0.74 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 35 of 131


Thursday, May 30, 2024, 01:40 AM

REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.


PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

___ 17J____________________ 3449X 300X 500_____________________ 18J____


| |
||=========================================================================||
| 4No20|H 440. 0.TO 3450 | | | | | | | | | |
| 7*10c/c221 | | | | | | | | 7*10c/c221 | |
| 4No16|H 58. 0.TO 3450 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 27 DESIGN RESULTS


=============================================

LEN - 2900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 2 - 16MM 0. 2900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 28.78 KN-MET AT 1208.MM, LOAD 64|
| REQD STEEL= 355.MM2, RHO=0.0027, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

2 442. 2 - 16MM 0. 2143. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 27.71 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 342.MM2, RHO=0.0026, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

3 442. 2 - 16MM 1845. 2900. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 20.42 KN-MET AT 2900.MM, LOAD 63|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 36 of 131


Thursday, May 30, 2024, 01:40 AM

| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |


| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 165./ 261. 18./ 28. 57/ 54


242. 184./ 179. 20./ 19. 57/ 54
483. 213./ 121. 23./ 13. 53/ 58
725. 235./ 78. 25./ 8. 53/ 81
967. 261./ 52. 28./ 6. 64/ 81
1208. 271./ 31. 29./ 3. 64/ 81
1450. 260./ 14. 28./ 1. 64/ 81
1692. 228./ 1. 24./ 0. 64/ 81
1933. 174./ 0. 19./ 0. 64/ 0
2175. 103./ 0. 11./ 0. 64/ 0
2417. 28./ 1. 3./ 0. 66/ 79
2658. 9./ 82. 1./ 9. 82/ 63
2900. 3./ 191. 0./ 20. 82/ 63

B E A M N O. 27 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 22.58 KNS Vc= 101.99 KNS Vs= 0.00 KNS
Tu= 2.12 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 41.19 KNS Vc= 101.99 KNS Vs= 0.00 KNS
Tu= 2.98 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 63
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1010. MM

___ 21J____________________ 2900X 300X 500_____________________ 22J____


| |
||=========================================================================||
| 2No16 H 442. 0.TO 2143 | 2No16 H|442.1845.TO|2900 | |
| | | | 6*10c/c221 | |
| 2No16 H 58. 0.TO 2900 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | oo | | oo | | oo | | oo |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 37 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 BEAM NO. 28 DESIGN RESULTS


=============================================

LEN - 3450. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 3 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 33.72 KN-MET AT 2012.MM, LOAD 65|
| REQD STEEL= 418.MM2, RHO=0.0031, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 2 - 16MM 0. 1026. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 28.39 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 351.MM2, RHO=0.0026, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

3 442. 3 - 16MM 1418. 3450. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 37.99 KN-MET AT 3450.MM, LOAD 53|
| REQD STEEL= 472.MM2, RHO=0.0036, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 47./ 267. 5./ 28. 80/ 65


287. 59./ 123. 6./ 13. 57/ 65
575. 93./ 33. 10./ 4. 53/ 81
862. 159./ 0. 17./ 0. 64/ 0
1150. 214./ 0. 23./ 0. 62/ 0
1437. 272./ 0. 29./ 0. 66/ 0
1725. 310./ 0. 33./ 0. 65/ 0
2012. 319./ 9. 34./ 1. 65/ 80
2300. 298./ 40. 32./ 4. 65/ 80
2587. 253./ 77. 27./ 8. 65/ 80

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 38 of 131


Thursday, May 30, 2024, 01:40 AM

2875. 205./ 148. 22./ 16. 54/ 57


3162. 167./ 241. 18./ 26. 58/ 53
3450. 137./ 360. 15./ 38. 81/ 53

B E A M N O. 28 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 38.80 KNS Vc= 103.07 KNS Vs= 0.00 KNS
Tu= 1.71 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 54
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

AT END SUPPORT - Vu= 38.79 KNS Vc= 102.15 KNS Vs= 0.00 KNS
Tu= 1.18 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 53
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

___ 22J____________________ 3449X 300X 500_____________________ 23J____


| |
||===================== ============================================||
| 2No16|H 442. 0.TO 1026 3No16 H 442.1418.TO 3450 | | | | |
| 7*10c/c221 | | | | | | | 7*10c/c221 | |
| 3No16|H 58. 0.TO 3450 | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | oo | | | | ooo | | ooo | | ooo |
| 2#16 | | 2#16 | | | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 29 DESIGN RESULTS


=============================================

LEN - 1100. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 2 - 16MM 939. 1100. NO YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 2.22 KN-MET AT 1100.MM, LOAD 52|
| REQD STEEL= 27.MM2, RHO=0.0002, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 39 of 131


Thursday, May 30, 2024, 01:40 AM

|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

2 442. 3 - 16MM 0. 1100. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 46.92 KN-MET AT 0.MM, LOAD 62|
| REQD STEEL= 585.MM2, RHO=0.0044, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 447. 0./ 47. 0/ 62


92. 0./ 405. 0./ 43. 0/ 62
183. 0./ 363. 0./ 38. 0/ 62
275. 0./ 322. 0./ 34. 0/ 62
367. 0./ 282. 0./ 30. 0/ 62
458. 0./ 243. 0./ 26. 0/ 62
550. 0./ 204. 0./ 22. 0/ 62
642. 0./ 166. 0./ 18. 0/ 62
733. 0./ 129. 0./ 14. 0/ 62
825. 0./ 92. 0./ 10. 0/ 62
917. 0./ 60. 0./ 6. 0/ 60
1008. 6./ 39. 1./ 4. 77/ 60
1100. 21./ 19. 2./ 2. 52/ 76

B E A M N O. 29 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 39.89 KNS Tu= 36.0 KN-MET


Vc= 96.2 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 52 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 38.96 KNS Tu= 36.0 KN-MET
Vc= 96.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 52 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 16J____________________ 1100X 300X 500_____________________ 19J____


| |
||=========================================================================||
| 3No16 H 442. 0.TO 1100 |
| |
| 2No16 H 58. 939.TO 1100 |
| ===========||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 40 of 131


Thursday, May 30, 2024, 01:40 AM

| | | | | | | | | | | |
| | | | | | | | | | | 2#16 |
| | | | | | | | | | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 30 DESIGN RESULTS


=============================================

LEN - 1100. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 2 - 16MM 941. 1100. NO YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 2.02 KN-MET AT 1100.MM, LOAD 76|
| REQD STEEL= 25.MM2, RHO=0.0002, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

2 442. 3 - 16MM 0. 1100. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 45.89 KN-MET AT 0.MM, LOAD 59|
| REQD STEEL= 572.MM2, RHO=0.0043, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 437. 0./ 46. 0/ 59


92. 0./ 396. 0./ 42. 0/ 59
183. 0./ 355. 0./ 37. 0/ 59
275. 0./ 315. 0./ 33. 0/ 59
367. 0./ 276. 0./ 29. 0/ 59
458. 0./ 238. 0./ 25. 0/ 59
550. 0./ 200. 0./ 21. 0/ 59
642. 0./ 163. 0./ 17. 0/ 59
733. 0./ 126. 0./ 13. 0/ 59
825. 0./ 90. 0./ 10. 0/ 59
917. 0./ 59. 0./ 6. 0/ 61
1008. 6./ 39. 1./ 4. 76/ 61
1100. 19./ 21. 2./ 2. 76/ 52

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 41 of 131


Thursday, May 30, 2024, 01:40 AM

B E A M N O. 30 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 38.86 KNS Tu= 33.8 KN-MET


Vc= 96.2 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 51 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.
AT END SUPPORT - Vu= 37.93 KNS Tu= 33.8 KN-MET
Vc= 96.3 KNS, ACI 318:CLAUSE 11.6.3.1
LOAD 51 TORSION VALUE TOO HIGH, INCREASE MEMBER SIZE.

___ 18J____________________ 1100X 300X 500_____________________ 20J____


| |
||=========================================================================||
| 3No16 H 442. 0.TO 1100 |
| |
| 2No16 H 58. 941.TO 1100 |
| ==========||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| | | | | | | | | | | 2#16 |
| | | | | | | | | | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 31 DESIGN RESULTS


=============================================

LEN - 4400. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 2 - 16MM 0. 4400. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 31.45 KN-MET AT 2933.MM, LOAD 62|
| REQD STEEL= 389.MM2, RHO=0.0029, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

2 442. 3 - 16MM 0. 1918. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 35.97 KN-MET AT 0.MM, LOAD 52|
| REQD STEEL= 446.MM2, RHO=0.0034, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 42 of 131


Thursday, May 30, 2024, 01:40 AM

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

3 442. 3 - 16MM 2299. 4400. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 33.77 KN-MET AT 4400.MM, LOAD 51|
| REQD STEEL= 418.MM2, RHO=0.0032, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 248./ 340. 26./ 36. 55/ 52


367. 259./ 224. 28./ 24. 51/ 56
733. 272./ 134. 29./ 14. 51/ 56
1100. 274./ 54. 29./ 6. 59/ 56
1467. 289./ 10. 31./ 1. 59/ 78
1833. 286./ 0. 30./ 0. 59/ 0
2200. 265./ 0. 28./ 0. 64/ 0
2567. 290./ 0. 31./ 0. 62/ 0
2933. 297./ 9. 31./ 1. 62/ 75
3300. 285./ 51. 30./ 5. 62/ 75
3667. 288./ 124. 30./ 13. 52/ 55
4033. 278./ 211. 29./ 23. 52/ 55
4400. 265./ 319. 28./ 34. 56/ 51

B E A M N O. 31 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 19.95 KNS Vc= 102.57 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 19.15 KNS Vc= 102.57 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.

___ 19J____________________ 4400X 300X 500_____________________ 20J____


| |
||================================ ====================================||
| 3No16 H 442. 0.TO 1918 3No16 H 442.2299.TO 4400 |
| |
| 2No16 H 58. 0.TO 4400 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 43 of 131


Thursday, May 30, 2024, 01:40 AM

| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |


| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 41 DESIGN RESULTS


=============================================

LEN - 4900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 4900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 83.13 KN-MET AT 4900.MM, LOAD 56|
| REQD STEEL= 801.MM2, RHO=0.0061, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 93115.6 cm^4

2 438. 3 - 25MM 0. 3058. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 132.82 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 1331.MM2, RHO=0.0101, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 89. MMS |
| REQD. DEVELOPMENT LENGTH = 758. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 145492.4 cm^4

3 438. 3 - 25MM 1637. 4900. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 128.26 KN-MET AT 4900.MM, LOAD 60|
| REQD STEEL= 1281.MM2, RHO=0.0098, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 89. MMS |
| REQD. DEVELOPMENT LENGTH = 758. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 145492.4 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 797./ 1337. 82./ 133. 76/ 61


408. 691./ 979. 71./ 99. 76/ 52
817. 582./ 676. 61./ 70. 55/ 52
1225. 535./ 434. 56./ 46. 60/ 56
1633. 480./ 244. 50./ 26. 60/ 77
2042. 390./ 86. 41./ 9. 60/ 77

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 44 of 131


Thursday, May 30, 2024, 01:40 AM

2450. 266./ 0. 28./ 0. 66/ 0


2858. 397./ 85. 42./ 9. 61/ 76
3267. 495./ 240. 52./ 26. 61/ 76
3675. 574./ 407. 60./ 43. 52/ 76
4083. 651./ 601. 67./ 63. 56/ 51
4492. 739./ 910. 76./ 93. 56/ 60
4900. 809./ 1287. 83./ 128. 56/ 60

B E A M N O. 41 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 41.20 KNS Vc= 109.67 KNS Vs= 0.00 KNS
Tu= 0.22 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 45
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 2010. MM

AT END SUPPORT - Vu= 48.20 KNS Vc= 101.92 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 47
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 2010. MM

___ 24J____________________ 4900X 300X 500_____________________ 25J____


| |
||=========================================================================||
| 3No25 H 438.| 0.TO 30583No25 H 438.1637.TO 4900| | | | | | | |
| 11*10c/c221 | | | | | | | | | | | | 11*10c/c221 | |
| 4No16 H |58.| 0.TO 4900| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 45 DESIGN RESULTS


=============================================

LEN - 3463. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 3463. YES YES


|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 45 of 131


Thursday, May 30, 2024, 01:40 AM

| CRITICAL POS MOMENT= 70.84 KN-MET AT 3463.MM, LOAD 58|


| REQD STEEL= 674.MM2, RHO=0.0051, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 1605. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 78.93 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 755.MM2, RHO=0.0057, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 440. 3 - 20MM 1024. 3463. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 92.15 KN-MET AT 3463.MM, LOAD 53|
| REQD STEEL= 893.MM2, RHO=0.0068, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 508./ 767. 53./ 79. 57/ 54


289. 439./ 573. 46./ 60. 57/ 54
577. 365./ 391. 38./ 41. 57/ 54
866. 295./ 231. 31./ 25. 53/ 58
1154. 222./ 99. 24./ 11. 53/ 82
1443. 166./ 0. 18./ 0. 63/ 0
1732. 219./ 29. 23./ 3. 66/ 79
2020. 307./ 124. 32./ 13. 66/ 79
2309. 385./ 253. 41./ 27. 54/ 57
2597. 465./ 393. 49./ 41. 54/ 57
2886. 534./ 544. 56./ 57. 54/ 57
3174. 609./ 716. 63./ 74. 58/ 53
3463. 685./ 903. 71./ 92. 58/ 53

B E A M N O. 45 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 41.86 KNS Vc= 103.66 KNS Vs= 0.00 KNS
Tu= 0.14 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 50
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1292. MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 46 of 131


Thursday, May 30, 2024, 01:40 AM

AT END SUPPORT - Vu= 38.00 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 0.40 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 49
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1292. MM

___ 26J____________________ 3463X 300X 500_____________________ 27J____


| |
||=========================================================================||
| 4No16|H 442. 0.TO 160520 H 440.1024.TO 3463 | | | | | | |
| 7*10c/c221 | | | | | | | | 7*10c/c221 | |
| 4No16|H 58. 0.TO 3463 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | ooo | | ooo | | ooo |
| 4#16 | | 4#16 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 47 DESIGN RESULTS


=============================================

LEN - 3450. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 68.46 KN-MET AT 3450.MM, LOAD 58|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 78.28 KN-MET AT 3450.MM, LOAD 53|
| REQD STEEL= 748.MM2, RHO=0.0056, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 47 of 131


Thursday, May 30, 2024, 01:40 AM

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 507./ 691. 53./ 71. 57/ 65


287. 431./ 518. 45./ 54. 57/ 54
575. 350./ 368. 37./ 39. 57/ 54
862. 266./ 231. 28./ 25. 53/ 58
1150. 185./ 116. 20./ 12. 53/ 81
1437. 112./ 17. 12./ 2. 64/ 81
1725. 151./ 34. 16./ 4. 65/ 80
2012. 252./ 125. 27./ 13. 65/ 80
2300. 343./ 236. 36./ 25. 65/ 57
2587. 425./ 354. 45./ 37. 54/ 57
2875. 510./ 480. 53./ 50. 54/ 57
3162. 587./ 614. 61./ 64. 54/ 57
3450. 661./ 760. 68./ 78. 58/ 53

B E A M N O. 47 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 53.03 KNS Vc= 101.70 KNS Vs= 0.00 KNS
Tu= 0.94 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 54
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

AT END SUPPORT - Vu= 49.75 KNS Vc= 100.41 KNS Vs= 0.00 KNS
Tu= 0.19 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 53
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

___ 28J____________________ 3449X 300X 500_____________________ 29J____


| |
||=========================================================================||
| 4No16|H 442. 0.TO 3450 | | | | | | | | | |
| 7*10c/c221 | | | | | | | | 7*10c/c221 | |
| 4No16|H 58. 0.TO 3450 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 48 DESIGN RESULTS

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 48 of 131


Thursday, May 30, 2024, 01:40 AM

=============================================

LEN - 2206. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 2206. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 74.36 KN-MET AT 0.MM, LOAD 57|
| REQD STEEL= 709.MM2, RHO=0.0053, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 440. 3 - 20MM 0. 2034. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 96.29 KN-MET AT 0.MM, LOAD 54|
| REQD STEEL= 941.MM2, RHO=0.0072, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 104078.2 cm^4

3 442. 2 - 16MM 1295. 2206. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 15.93 KN-MET AT 2206.MM, LOAD 79|
| REQD STEEL= 195.MM2, RHO=0.0015, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 720./ 946. 74./ 96. 57/ 54


184. 652./ 813. 68./ 84. 57/ 54
368. 584./ 685. 61./ 71. 57/ 54
551. 515./ 560. 54./ 58. 57/ 54
735. 445./ 438. 47./ 46. 57/ 54
919. 380./ 324. 40./ 34. 53/ 58
1103. 320./ 219. 34./ 23. 53/ 58
1287. 259./ 120. 28./ 13. 53/ 82
1471. 218./ 40. 23./ 4. 63/ 82
1654. 192./ 0. 20./ 0. 61/ 0
1838. 283./ 20. 30./ 2. 66/ 79
2022. 390./ 84. 41./ 9. 66/ 79
2206. 496./ 149. 52./ 16. 66/ 79

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 49 of 131


Thursday, May 30, 2024, 01:40 AM

B E A M N O. 48 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 26.35 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 20.19 KN-MET Tc= 4.0 KN-MET Ts= 26.9 KN-MET LOAD 61
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 663. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.20 SQ.CM.

AT END SUPPORT - Vu= 18.48 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 20.19 KN-MET Tc= 4.0 KN-MET Ts= 26.9 KN-MET LOAD 61
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 663. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.20 SQ.CM.

___ 24J____________________ 2205X 300X 500_____________________ 30J____


| |
||=========================================================================||
| 3No20 H 440.| 0.TO 2034| | |2No16|H 442.1295.TO 2206 | |
| 6*16c/c156 | | | | | | | 6*16c/c156 | |
| 4No16 H 58.| 0.TO 2206| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | oo |
| 3#20 | | 3#20 | | 3#20 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 49 DESIGN RESULTS


=============================================

LEN - 701. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 701. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 58.65 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 50 of 131


Thursday, May 30, 2024, 01:40 AM

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 701. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 83.23 KN-MET AT 701.MM, LOAD 53|
| REQD STEEL= 802.MM2, RHO=0.0061, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 93115.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 563./ 136. 59./ 15. 66/ 79


58. 540./ 169. 56./ 18. 66/ 79
117. 516./ 203. 54./ 22. 66/ 79
175. 492./ 251. 52./ 27. 66/ 57
234. 475./ 304. 50./ 32. 54/ 57
292. 467./ 357. 49./ 38. 54/ 57
351. 458./ 411. 48./ 43. 54/ 57
409. 448./ 466. 47./ 49. 54/ 57
467. 447./ 529. 47./ 55. 58/ 53
526. 449./ 598. 47./ 62. 58/ 53
584. 450./ 667. 47./ 69. 58/ 53
643. 452./ 738. 47./ 76. 58/ 53
701. 453./ 811. 48./ 83. 58/ 53

B E A M N O. 49 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 49 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 49 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 30J____________________ 701X 300X 500_____________________ 26J____


| |
||=========================================================================||
| 4No16 H 442. 0.TO 701 |
| |
| 4No16 H 58. 0.TO 701 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 51 of 131


Thursday, May 30, 2024, 01:40 AM

| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 50 DESIGN RESULTS


=============================================

LEN - 3690. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 3 - 20MM 0. 3690. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 84.28 KN-MET AT 2767.MM, LOAD 61|
| REQD STEEL= 812.MM2, RHO=0.0062, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

2 440. 3 - 20MM 0. 2101. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 94.38 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 916.MM2, RHO=0.0069, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

3 442. 2 - 16MM 2778. 3690. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 10.73 KN-MET AT 3690.MM, LOAD 76|
| REQD STEEL= 131.MM2, RHO=0.0010, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 264./ 926. 28./ 94. 76/ 61


308. 277./ 602. 29./ 63. 76/ 52
615. 345./ 349. 36./ 37. 51/ 56
923. 469./ 179. 49./ 19. 60/ 77
1230. 613./ 87. 64./ 9. 60/ 77

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 52 of 131


Thursday, May 30, 2024, 01:40 AM

1538. 720./ 4. 74./ 0. 60/ 77


1845. 782./ 0. 80./ 0. 60/ 0
2152. 794./ 0. 82./ 0. 60/ 0
2460. 792./ 0. 81./ 0. 62/ 0
2768. 821./ 0. 84./ 0. 61/ 0
3075. 814./ 0. 84./ 0. 61/ 0
3382. 776./ 26. 80./ 3. 61/ 76
3690. 710./ 100. 73./ 11. 61/ 76

B E A M N O. 50 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 65.48 KNS Vc= 109.44 KNS Vs= 0.00 KNS
Tu= 2.61 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1405. MM

AT END SUPPORT - Vu= 42.37 KNS Vc= 103.81 KNS Vs= 0.00 KNS
Tu= 2.22 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 51
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1405. MM

___ 30J____________________ 3690X 300X 500_____________________ 32J____


| |
||========================================== ==================||
| 3No20|H 440. 0.TO 2101 | | | | 2No16 H 442.2778.TO 3690 |
| 8*10c/c220 | | | | | | | 8*10c/c220| |
| 3No20|H 60. 0.TO 3690 | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | | | oo | | oo |
| 3#20 | | 3#20 | | 3#20 | | | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 51 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 53 of 131


Thursday, May 30, 2024, 01:40 AM

|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 78.53 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 751.MM2, RHO=0.0057, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 440. 3 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 96.26 KN-MET AT 1050.MM, LOAD 60|
| REQD STEEL= 941.MM2, RHO=0.0072, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 104078.2 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 762./ 90. 79./ 10. 61/ 76


88. 692./ 122. 72./ 13. 61/ 76
175. 621./ 154. 65./ 16. 61/ 76
263. 549./ 187. 57./ 20. 61/ 76
350. 493./ 221. 52./ 23. 52/ 76
438. 445./ 278. 47./ 30. 52/ 55
525. 397./ 339. 42./ 36. 52/ 55
613. 364./ 417. 38./ 44. 56/ 51
700. 336./ 504. 36./ 53. 56/ 51
788. 308./ 593. 33./ 62. 56/ 51
875. 279./ 706. 30./ 73. 56/ 60
963. 267./ 824. 28./ 85. 77/ 60
1050. 258./ 945. 27./ 96. 77/ 60

B E A M N O. 51 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 121.68 KNS Vc= 108.80 KNS Vs= 53.43 KNS
Tu= 10.59 KN-MET Tc= 4.0 KN-MET Ts= 14.1 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.30 SQ.CM.

AT END SUPPORT - Vu= 125.48 KNS Vc= 108.80 KNS Vs= 58.50 KNS
Tu= 10.59 KN-MET Tc= 4.0 KN-MET Ts= 14.1 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.30 SQ.CM.

___ 32J____________________ 1050X 300X 500_____________________ 31J____


| |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 54 of 131


Thursday, May 30, 2024, 01:40 AM

||=========================================================================||
| 3No20 H 440.| 0.TO 1050 | | |
| 2*12c/c156 | 2*12c/c156 | |
| 4No16 H 58.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 52 DESIGN RESULTS


=============================================

LEN - 4150. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 4150. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 53.68 KN-MET AT 2075.MM, LOAD 65|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 2 - 16MM 0. 451. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 15.06 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 185.MM2, RHO=0.0014, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

3 442. 3 - 16MM 2489. 4150. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 38.39 KN-MET AT 4150.MM, LOAD 64|
| REQD STEEL= 477.MM2, RHO=0.0036, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 55 of 131


Thursday, May 30, 2024, 01:40 AM

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 141. 0./ 15. 0/ 66


346. 39./ 0. 4./ 0. 63/ 0
692. 190./ 0. 20./ 0. 65/ 0
1038. 322./ 0. 34./ 0. 65/ 0
1383. 425./ 0. 45./ 0. 65/ 0
1729. 490./ 0. 51./ 0. 65/ 0
2075. 513./ 0. 54./ 0. 65/ 0
2421. 493./ 0. 52./ 0. 65/ 0
2767. 428./ 0. 45./ 0. 65/ 0
3112. 329./ 31. 35./ 3. 65/ 80
3458. 202./ 73. 22./ 8. 65/ 80
3804. 95./ 177. 10./ 19. 81/ 53
4150. 64./ 364. 7./ 38. 81/ 64

B E A M N O. 52 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 41.82 KNS Vc= 107.33 KNS Vs= 0.00 KNS
Tu= 4.75 KN-MET Tc= 4.0 KN-MET Ts= 6.3 KN-MET LOAD 45
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1635. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.93 SQ.CM.

AT END SUPPORT - Vu= 46.91 KNS Vc= 107.33 KNS Vs= 0.00 KNS
Tu= 4.75 KN-MET Tc= 4.0 KN-MET Ts= 6.3 KN-MET LOAD 45
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1635. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.93 SQ.CM.

___ 32J____________________ 4150X 300X 500_____________________ 33J____


| |
||======= ==============================||
| 2No16 H 442. 0.TO 451 3No16 H|442.2489.TO|4150 | | |
| 12*10c/c156 | | | | | 12*10c/c156 | |
| 4No16 H 58. 0.TO 4150 | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | | | | | ooo | | ooo | | ooo |
| 2#16 | | | | | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 56 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 BEAM NO. 63 DESIGN RESULTS


=============================================

LEN - 4900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 4900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 55.58 KN-MET AT 4900.MM, LOAD 77|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 440. 4 - 20MM 0. 2692. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 106.89 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 1045.MM2, RHO=0.0079, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

3 440. 4 - 20MM 2003. 4900. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 103.36 KN-MET AT 4900.MM, LOAD 60|
| REQD STEEL= 1009.MM2, RHO=0.0076, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 524./ 1057. 55./ 107. 76/ 61


408. 466./ 730. 49./ 75. 76/ 61
817. 399./ 452. 42./ 47. 76/ 61
1225. 391./ 285. 41./ 30. 60/ 77
1633. 380./ 161. 40./ 17. 60/ 77
2042. 333./ 48. 35./ 5. 60/ 77
2450. 252./ 0. 27./ 0. 66/ 0
2858. 338./ 46. 36./ 5. 61/ 76
3267. 391./ 159. 41./ 17. 61/ 76
3675. 408./ 281. 43./ 30. 61/ 76
4083. 404./ 429. 43./ 45. 77/ 60

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 57 of 131


Thursday, May 30, 2024, 01:40 AM

4492. 472./ 700. 50./ 72. 77/ 60


4900. 532./ 1020. 56./ 103. 77/ 60

B E A M N O. 63 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 41.02 KNS Vc= 107.33 KNS Vs= 0.00 KNS
Tu= 0.19 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 45
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 2010. MM

AT END SUPPORT - Vu= 41.00 KNS Vc= 101.80 KNS Vs= 0.00 KNS
Tu= 0.07 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 47
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 2010. MM

___ 34J____________________ 4900X 300X 500_____________________ 35J____


| |
||=========================================================================||
| 4No20 H 440.| 0.TO 2692| | 4No20 H 440.2003.TO 4900 | | | | | |
| 11*10c/c221 | | | | | | | | | | | | 11*10c/c221 | |
| 4No16 H |58.| 0.TO 4900| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 65 DESIGN RESULTS


=============================================

LEN - 3463. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 3 - 16MM 0. 3463. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 40.36 KN-MET AT 3463.MM, LOAD 82|
| REQD STEEL= 502.MM2, RHO=0.0038, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 58 of 131


Thursday, May 30, 2024, 01:40 AM

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 4 - 16MM 0. 1605. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 57.48 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 442. 4 - 16MM 1136. 3463. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 59.88 KN-MET AT 3463.MM, LOAD 63|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 288./ 551. 31./ 57. 79/ 66


289. 247./ 387. 26./ 41. 79/ 66
577. 204./ 236. 22./ 25. 79/ 66
866. 195./ 136. 21./ 15. 63/ 82
1154. 189./ 61. 20./ 7. 63/ 82
1443. 162./ 0. 17./ 0. 63/ 0
1732. 191./ 4. 20./ 0. 66/ 79
2020. 243./ 69. 26./ 7. 66/ 79
2309. 276./ 138. 29./ 15. 66/ 79
2597. 292./ 212. 31./ 23. 66/ 79
2886. 293./ 291. 31./ 31. 66/ 57
3174. 338./ 426. 36./ 45. 82/ 63
3463. 383./ 575. 40./ 60. 82/ 63

B E A M N O. 65 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 45.04 KNS Vc= 101.67 KNS Vs= 0.00 KNS
Tu= 0.05 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 54
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1292. MM

AT END SUPPORT - Vu= 43.01 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 0.27 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 53
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1292. MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 59 of 131


Thursday, May 30, 2024, 01:40 AM

___ 36J____________________ 3463X 300X 500_____________________ 37J____


| |
||=========================================================================||
| 4No16|H 442. 0.TO 1605No16 H|442.1136.TO|3463| | | | | | |
| 7*10c/c221 | | | | | | | | 7*10c/c221 | |
| 3No16|H 58. 0.TO 3463 | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 67 DESIGN RESULTS


=============================================

LEN - 3450. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 3 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 41.70 KN-MET AT 3450.MM, LOAD 81|
| REQD STEEL= 519.MM2, RHO=0.0039, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 4 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 51.37 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 643.MM2, RHO=0.0048, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 60 of 131


Thursday, May 30, 2024, 01:40 AM

0. 302./ 491. 32./ 51. 80/ 65


287. 255./ 357. 27./ 38. 80/ 65
575. 206./ 236. 22./ 25. 80/ 65
862. 172./ 145. 18./ 15. 64/ 81
1150. 145./ 75. 16./ 8. 64/ 81
1437. 108./ 8. 12./ 1. 64/ 81
1725. 128./ 12. 14./ 1. 65/ 80
2012. 193./ 72. 21./ 8. 65/ 80
2300. 247./ 136. 26./ 15. 65/ 80
2587. 291./ 202. 31./ 22. 65/ 80
2875. 324./ 272. 34./ 29. 65/ 80
3162. 346./ 344. 37./ 36. 65/ 80
3450. 396./ 459. 42./ 48. 81/ 64

B E A M N O. 67 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 43.54 KNS Vc= 101.41 KNS Vs= 0.00 KNS
Tu= 0.06 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 65
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1285. MM

AT END SUPPORT - Vu= 11.57 KNS Vc= 104.81 KNS Vs= 0.00 KNS
Tu= 0.31 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.

___ 38J____________________ 3449X 300X 500_____________________ 39J____


| |
||=========================================================================||
| 4No16|H 442. 0.TO 3450 | | |
| 7*10c/c221 | | | | |
| 3No16|H 58. 0.TO 3450 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 68 DESIGN RESULTS


=============================================

LEN - 2206. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 61 of 131


Thursday, May 30, 2024, 01:40 AM

1 58. 3 - 16MM 0. 2206. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 45.29 KN-MET AT 2206.MM, LOAD 66|
| REQD STEEL= 565.MM2, RHO=0.0043, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 4 - 16MM 0. 1922. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 70.62 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 672.MM2, RHO=0.0051, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 442. 2 - 16MM 1479. 2206. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 6.62 KN-MET AT 2206.MM, LOAD 79|
| REQD STEEL= 81.MM2, RHO=0.0006, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 349./ 682. 37./ 71. 79/ 66


184. 317./ 575. 34./ 60. 79/ 66
368. 284./ 470. 30./ 49. 79/ 66
551. 251./ 369. 27./ 39. 79/ 66
735. 218./ 271. 23./ 29. 79/ 66
919. 188./ 180. 20./ 19. 71/ 82
1103. 190./ 125. 20./ 13. 63/ 82
1287. 191./ 70. 20./ 7. 63/ 82
1471. 190./ 16. 20./ 2. 63/ 82
1654. 187./ 0. 20./ 0. 61/ 0
1838. 264./ 0. 28./ 0. 66/ 0
2022. 348./ 25. 37./ 3. 66/ 79
2206. 431./ 62. 45./ 7. 66/ 79

B E A M N O. 68 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.62 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 18.58 KN-MET Tc= 4.0 KN-MET Ts= 24.8 KN-MET LOAD 61
STIRRUPS ARE REQUIRED FOR TORSION.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 62 of 131


Thursday, May 30, 2024, 01:40 AM

REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.


PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 663. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 7.54 SQ.CM.

AT END SUPPORT - Vu= 21.74 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 18.58 KN-MET Tc= 4.0 KN-MET Ts= 24.8 KN-MET LOAD 61
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 663. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 7.54 SQ.CM.

___ 34J____________________ 2205X 300X 500_____________________ 40J____


| |
||=========================================================================||
| 4No16 H 442.| 0.TO 1922| | | |2No16|H 442.1479.TO 2206 |
| 6*12c/c156 | | | | | | | 6*12c/c156 | |
| 3No16 H 58.| 0.TO 2206| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 69 DESIGN RESULTS


=============================================

LEN - 701. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 701. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 51.89 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 649.MM2, RHO=0.0049, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 701. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 53.52 KN-MET AT 701.MM, LOAD 63|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 63 of 131


Thursday, May 30, 2024, 01:40 AM

|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 496./ 50. 52./ 5. 66/ 79


58. 466./ 74. 49./ 8. 66/ 79
117. 436./ 98. 46./ 10. 66/ 79
175. 405./ 122. 43./ 13. 66/ 79
234. 373./ 147. 39./ 16. 66/ 79
292. 341./ 172. 36./ 18. 66/ 79
351. 309./ 197. 33./ 21. 66/ 79
409. 276./ 223. 29./ 24. 66/ 79
467. 245./ 251. 26./ 27. 82/ 71
526. 249./ 314. 26./ 33. 82/ 63
584. 252./ 379. 27./ 40. 82/ 63
643. 255./ 445. 27./ 47. 82/ 63
701. 258./ 512. 27./ 54. 82/ 63

B E A M N O. 69 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 69 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 69 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 40J____________________ 701X 300X 500_____________________ 36J____


| |
||=========================================================================||
| 4No16 H 442. 0.TO 701 |
| |
| 4No16 H 58. 0.TO 701 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 64 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 BEAM NO. 70 DESIGN RESULTS


=============================================

LEN - 3690. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 3690. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 81.74 KN-MET AT 2767.MM, LOAD 61|
| REQD STEEL= 783.MM2, RHO=0.0059, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 1681. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 81.46 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 780.MM2, RHO=0.0059, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 442. 2 - 16MM 3085. 3690. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 3.73 KN-MET AT 3690.MM, LOAD 76|
| REQD STEEL= 45.MM2, RHO=0.0003, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 142./ 792. 15./ 81. 76/ 61


308. 170./ 467. 18./ 49. 76/ 61
615. 203./ 199. 22./ 21. 60/ 56
923. 391./ 105. 41./ 11. 60/ 77
1230. 550./ 29. 57./ 3. 60/ 77
1538. 672./ 0. 70./ 0. 60/ 0
1845. 750./ 0. 77./ 0. 60/ 0
2152. 779./ 0. 80./ 0. 60/ 0
2460. 783./ 0. 81./ 0. 62/ 0
2768. 795./ 0. 82./ 0. 61/ 0
3075. 771./ 0. 79./ 0. 61/ 0
3382. 715./ 0. 74./ 0. 61/ 0
3690. 633./ 35. 66./ 4. 61/ 76

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 65 of 131


Thursday, May 30, 2024, 01:40 AM

B E A M N O. 70 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 65.35 KNS Vc= 109.36 KNS Vs= 0.00 KNS
Tu= 2.43 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1405. MM

AT END SUPPORT - Vu= 41.35 KNS Vc= 100.27 KNS Vs= 0.00 KNS
Tu= 2.95 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 59
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1405. MM

___ 40J____________________ 3690X 300X 500_____________________ 42J____


| |
||================================= ============||
| 4No16|H 442. 0.TO 1681 | | 2No16 H 442.3085.TO 3690 |
| 8*10c/c221 | | | | 8*10c/c221| |
| 4No16|H 58. 0.TO 3690 | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | | | | | oo |
| 4#16 | | 4#16 | | 4#16 | | | | | | 2#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 71 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 70.76 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 673.MM2, RHO=0.0051, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 66 of 131


Thursday, May 30, 2024, 01:40 AM

2 440. 3 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 83.65 KN-MET AT 1050.MM, LOAD 60|
| REQD STEEL= 806.MM2, RHO=0.0061, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 684./ 23. 71./ 2. 61/ 76


88. 610./ 50. 63./ 5. 61/ 76
175. 535./ 78. 56./ 8. 61/ 76
263. 459./ 106. 48./ 11. 61/ 76
350. 382./ 135. 40./ 14. 61/ 76
438. 305./ 164. 32./ 18. 61/ 76
525. 233./ 194. 25./ 21. 52/ 76
613. 196./ 274. 21./ 29. 77/ 60
700. 184./ 376. 20./ 40. 77/ 60
788. 173./ 481. 18./ 50. 77/ 60
875. 161./ 589. 17./ 61. 77/ 60
963. 148./ 700. 16./ 72. 77/ 60
1050. 136./ 815. 15./ 84. 77/ 60

B E A M N O. 71 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 116.10 KNS Vc= 107.47 KNS Vs= 47.33 KNS
Tu= 9.86 KN-MET Tc= 4.0 KN-MET Ts= 13.1 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.00 SQ.CM.

AT END SUPPORT - Vu= 119.91 KNS Vc= 107.47 KNS Vs= 52.40 KNS
Tu= 9.86 KN-MET Tc= 4.0 KN-MET Ts= 13.1 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.00 SQ.CM.

___ 42J____________________ 1050X 300X 500_____________________ 41J____


| |
||=========================================================================||
| 3No20 H 440.| 0.TO 1050 | | |
| 2*12c/c156 | 2*12c/c156 | |
| 4No16 H 58.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 67 of 131


Thursday, May 30, 2024, 01:40 AM

| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 72 DESIGN RESULTS


=============================================

LEN - 4150. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 4150. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 51.63 KN-MET AT 2075.MM, LOAD 65|
| REQD STEEL= 646.MM2, RHO=0.0049, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 2 - 16MM 0. 451. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 13.93 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 171.MM2, RHO=0.0013, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

3 442. 3 - 16MM 2489. 4150. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 34.61 KN-MET AT 4150.MM, LOAD 64|
| REQD STEEL= 429.MM2, RHO=0.0032, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 130. 0./ 14. 0/ 66


346. 50./ 0. 5./ 0. 63/ 0

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 68 of 131


Thursday, May 30, 2024, 01:40 AM

692. 190./ 0. 20./ 0. 65/ 0


1038. 317./ 0. 34./ 0. 65/ 0
1383. 415./ 0. 44./ 0. 65/ 0
1729. 475./ 0. 50./ 0. 65/ 0
2075. 493./ 0. 52./ 0. 65/ 0
2421. 468./ 0. 49./ 0. 65/ 0
2767. 398./ 0. 42./ 0. 65/ 0
3112. 295./ 1. 31./ 0. 65/ 80
3458. 163./ 40. 17./ 4. 65/ 80
3804. 56./ 133. 6./ 14. 81/ 64
4150. 21./ 327. 2./ 35. 81/ 64

B E A M N O. 72 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 41.45 KNS Vc= 107.00 KNS Vs= 0.00 KNS
Tu= 4.81 KN-MET Tc= 4.0 KN-MET Ts= 6.4 KN-MET LOAD 45
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1635. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.95 SQ.CM.

AT END SUPPORT - Vu= 47.28 KNS Vc= 107.00 KNS Vs= 0.00 KNS
Tu= 4.81 KN-MET Tc= 4.0 KN-MET Ts= 6.4 KN-MET LOAD 45
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1635. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.95 SQ.CM.

___ 42J____________________ 4150X 300X 500_____________________ 43J____


| |
||======= ==============================||
| 2No16 H 442. 0.TO 451 3No16 H|442.2489.TO|4150 | | |
| 12*10c/c156 | | | | | 12*10c/c156 | |
| 4No16 H 58. 0.TO 4150 | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | | | | | ooo | | ooo | | ooo |
| 2#16 | | | | | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 83 DESIGN RESULTS


=============================================

LEN - 4900. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 69 of 131


Thursday, May 30, 2024, 01:40 AM

(MM) (MM) (MM) STA END


_____________________________________________________________________

1 58. 3 - 16MM 0. 4900. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 37.96 KN-MET AT 3267.MM, LOAD 61|
| REQD STEEL= 471.MM2, RHO=0.0036, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 4 - 16MM 0. 2084. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 66.51 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 442. 4 - 16MM 2611. 4900. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 64.09 KN-MET AT 4900.MM, LOAD 60|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 230./ 641. 25./ 67. 76/ 61


408. 225./ 383. 24./ 40. 76/ 61
817. 237./ 195. 25./ 21. 60/ 77
1225. 312./ 115. 33./ 12. 60/ 77
1633. 352./ 44. 37./ 5. 60/ 77
2042. 356./ 0. 38./ 0. 60/ 0
2450. 324./ 0. 34./ 0. 66/ 0
2858. 360./ 0. 38./ 0. 61/ 0
3267. 360./ 42. 38./ 5. 61/ 76
3675. 324./ 112. 34./ 12. 61/ 76
4083. 252./ 191. 27./ 20. 61/ 76
4492. 229./ 364. 24./ 38. 77/ 60
4900. 235./ 617. 25./ 64. 77/ 60

B E A M N O. 83 D E S I G N R E S U L T S - SHEAR

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 70 of 131


Thursday, May 30, 2024, 01:40 AM

AT START SUPPORT - Vu= 40.82 KNS Vc= 103.99 KNS Vs= 0.00 KNS
Tu= 0.33 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 45
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 2010. MM

AT END SUPPORT - Vu= 39.91 KNS Vc= 103.99 KNS Vs= 0.00 KNS
Tu= 0.33 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 45
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 2010. MM

___ 44J____________________ 4900X 300X 500_____________________ 45J____


| |
||=============================== ===================================||
| 4No16 H 442.| 0.TO 2084| | 4No16|H 442.2611.TO 4900 | | | |
| 11*10c/c221 | | | | | | | | | | 11*10c/c221 | |
| 3No16 H |58.| 0.TO 4900| | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 85 DESIGN RESULTS


=============================================

LEN - 3463. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 2 - 16MM 0. 3463. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 22.47 KN-MET AT 2309.MM, LOAD 66|
| REQD STEEL= 276.MM2, RHO=0.0021, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

2 442. 3 - 16MM 0. 1605. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 39.97 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 497.MM2, RHO=0.0037, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 71 of 131


Thursday, May 30, 2024, 01:40 AM

| REQD. DEVELOPMENT LENGTH = 347. MMS |


|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

3 442. 2 - 16MM 1425. 3463. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 26.66 KN-MET AT 3463.MM, LOAD 63|
| REQD STEEL= 329.MM2, RHO=0.0025, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 86./ 379. 9./ 40. 79/ 66


289. 84./ 248. 9./ 26. 79/ 66
577. 80./ 128. 9./ 14. 79/ 66
866. 105./ 53. 11./ 6. 63/ 82
1154. 144./ 13. 15./ 1. 63/ 82
1443. 168./ 0. 18./ 0. 59/ 0
1732. 184./ 0. 20./ 0. 66/ 0
2020. 207./ 1. 22./ 0. 66/ 79
2309. 211./ 31. 22./ 3. 66/ 79
2597. 198./ 66. 21./ 7. 66/ 79
2886. 170./ 104. 18./ 11. 66/ 79
3174. 140./ 153. 15./ 16. 82/ 63
3463. 149./ 251. 16./ 27. 82/ 63

B E A M N O. 85 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 43.24 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 0.47 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 65
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 221. MM C/C FOR 1292. MM

AT END SUPPORT - Vu= 18.28 KNS Vc= 100.63 KNS Vs= 0.00 KNS
Tu= 0.28 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.

___ 46J____________________ 3463X 300X 500_____________________ 47J____


| |
||=========================================================================||
| 3No16|H 442. 0.TO 1605 | 2No16 H 442.1425.TO 3463 |
| 7*10c/c221 | | | | |
| 2No16|H 58. 0.TO 3463 | | |
||=========================================================================||
| |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 72 of 131


Thursday, May 30, 2024, 01:40 AM

_________ _________ _________ _________ _________ _________


| | | | | | | | | | | |
| ooo | | ooo | | ooo | | oo | | oo | | oo |
| 3#16 | | 3#16 | | 3#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 87 DESIGN RESULTS


=============================================

LEN - 3450. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 2 - 16MM 0. 3450. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 22.29 KN-MET AT 2875.MM, LOAD 65|
| REQD STEEL= 274.MM2, RHO=0.0021, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

2 442. 3 - 16MM 0. 1601. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 35.49 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 440.MM2, RHO=0.0033, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

3 442. 2 - 16MM 1418. 3450. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 16.73 KN-MET AT 3450.MM, LOAD 80|
| REQD STEEL= 205.MM2, RHO=0.0015, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 95./ 336. 10./ 35. 80/ 65

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 73 of 131


Thursday, May 30, 2024, 01:40 AM

287. 88./ 231. 9./ 25. 80/ 65


575. 78./ 139. 8./ 15. 80/ 65
862. 71./ 63. 8./ 7. 64/ 81
1150. 90./ 27. 10./ 3. 64/ 81
1437. 100./ 0. 11./ 0. 62/ 0
1725. 120./ 0. 13./ 0. 65/ 0
2012. 158./ 8. 17./ 1. 65/ 80
2300. 186./ 32. 20./ 3. 65/ 80
2587. 203./ 59. 22./ 6. 65/ 80
2875. 209./ 89. 22./ 10. 65/ 80
3162. 205./ 122. 22./ 13. 65/ 80
3450. 189./ 157. 20./ 17. 65/ 80

B E A M N O. 87 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 19.14 KNS Vc= 100.59 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.
AT END SUPPORT - Vu= 8.69 KNS Vc= 98.54 KNS Vs= 0.00 KNS
Tu= 0.38 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.

___ 48J____________________ 3449X 300X 500_____________________ 49J____


| |
||=========================================================================||
| 3No16 H 442. 0.TO 1601 2No16 H 442.1418.TO 3450 |
| |
| 2No16 H 58. 0.TO 3450 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | oo | | oo | | oo |
| 3#16 | | 3#16 | | 3#16 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 | | 2#16 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 88 DESIGN RESULTS


=============================================

LEN - 2206. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 3 - 16MM 0. 2206. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 35.13 KN-MET AT 2206.MM, LOAD 66|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 74 of 131


Thursday, May 30, 2024, 01:40 AM

| REQD STEEL= 435.MM2, RHO=0.0033, RHOMX=0.0284 RHOMN=0.0050 |


| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 3 - 16MM 0. 1738. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 33.25 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 412.MM2, RHO=0.0031, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 114./ 314. 12./ 33. 79/ 66


184. 110./ 249. 12./ 26. 79/ 66
368. 106./ 186. 11./ 20. 79/ 66
551. 101./ 126. 11./ 13. 79/ 66
735. 112./ 84. 12./ 9. 63/ 82
919. 138./ 60. 15./ 6. 63/ 82
1103. 162./ 35. 17./ 4. 63/ 82
1287. 184./ 12. 20./ 1. 63/ 82
1471. 205./ 0. 22./ 0. 63/ 0
1654. 223./ 0. 24./ 0. 63/ 0
1838. 242./ 0. 26./ 0. 59/ 0
2022. 288./ 0. 31./ 0. 66/ 0
2206. 332./ 0. 35./ 0. 66/ 0

B E A M N O. 88 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 25.19 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 14.33 KN-MET Tc= 4.0 KN-MET Ts= 19.1 KN-MET LOAD 61
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 663. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 5.82 SQ.CM.

AT END SUPPORT - Vu= 17.32 KNS Vc= 100.91 KNS Vs= 0.00 KNS
Tu= 14.33 KN-MET Tc= 4.0 KN-MET Ts= 19.1 KN-MET LOAD 61
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 663. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 5.82 SQ.CM.

___ 44J____________________ 2205X 300X 500_____________________ 50J____

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 75 of 131


Thursday, May 30, 2024, 01:40 AM

||========================================================== |
| 3No16 H 442.| 0.TO 1738| | | | | |
| 6*12c/c156 | | | | | | | 6*12c/c156 |
| 3No16 H 58.| 0.TO 2206| | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | | | |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 89 DESIGN RESULTS


=============================================

LEN - 701. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 3 - 16MM 0. 701. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 41.75 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 519.MM2, RHO=0.0039, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 3 - 16MM 0. 701. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 34.16 KN-MET AT 701.MM, LOAD 63|
| REQD STEEL= 423.MM2, RHO=0.0032, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 396./ 0. 42./ 0. 66/ 0


58. 355./ 0. 37./ 0. 66/ 0
117. 312./ 0. 33./ 0. 66/ 0
175. 270./ 0. 29./ 0. 66/ 0

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 76 of 131


Thursday, May 30, 2024, 01:40 AM

234. 227./ 14. 24./ 1. 66/ 79


292. 183./ 30. 20./ 3. 66/ 79
351. 139./ 46. 15./ 5. 66/ 79
409. 95./ 62. 10./ 7. 66/ 79
467. 67./ 95. 7./ 10. 82/ 63
526. 60./ 150. 6./ 16. 82/ 63
584. 53./ 207. 6./ 22. 82/ 63
643. 47./ 264. 5./ 28. 82/ 63
701. 39./ 323. 4./ 34. 82/ 63

B E A M N O. 89 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 89 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 89 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 50J____________________ 701X 300X 500_____________________ 46J____


| |
||=========================================================================||
| 3No16 H 442. 0.TO 701 |
| |
| 3No16 H 58. 0.TO 701 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 90 DESIGN RESULTS


=============================================

LEN - 3690. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 3 - 20MM 0. 3690. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 85.27 KN-MET AT 2460.MM, LOAD 62|
| REQD STEEL= 823.MM2, RHO=0.0062, RHOMX=0.0284 RHOMN=0.0050 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 77 of 131


Thursday, May 30, 2024, 01:40 AM

| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |


| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

2 442. 4 - 16MM 0. 1374. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 65.50 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 44./ 631. 5./ 65. 76/ 61


308. 86./ 326. 9./ 34. 76/ 61
615. 166./ 98. 18./ 11. 60/ 77
923. 369./ 29. 39./ 3. 60/ 77
1230. 542./ 0. 57./ 0. 60/ 0
1538. 680./ 0. 70./ 0. 60/ 0
1845. 775./ 0. 80./ 0. 60/ 0
2152. 819./ 0. 84./ 0. 60/ 0
2460. 832./ 0. 85./ 0. 62/ 0
2768. 829./ 0. 85./ 0. 61/ 0
3075. 790./ 0. 81./ 0. 61/ 0
3382. 719./ 0. 74./ 0. 61/ 0
3690. 623./ 0. 65./ 0. 61/ 0

B E A M N O. 90 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 65.54 KNS Vc= 109.61 KNS Vs= 0.00 KNS
Tu= 2.66 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
NO STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 220. MM C/C FOR 1405. MM

AT END SUPPORT - Vu= 22.60 KNS Vc= 98.01 KNS Vs= 0.00 KNS
Tu= 2.66 KN-MET Tc= 4.0 KN-MET Ts= 0.0 KN-MET LOAD 44
STIRRUPS ARE NOT REQUIRED.

___ 50J____________________ 3690X 300X 500_____________________ 52J____


| |
||=========================== |
| 4No16|H 442. 0.TO 1374 | |
| 8*10c/c220 | | | |
| 3No20|H 60. 0.TO 3690 | |
||=========================================================================||
| |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 78 of 131


Thursday, May 30, 2024, 01:40 AM

|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | | | | | | | |
| 4#16 | | 4#16 | | | | | | | | |
| | | | | | | | | | | |
| 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 | | 3#20 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 91 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 69.42 KN-MET AT 0.MM, LOAD 61|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 67.75 KN-MET AT 1050.MM, LOAD 60|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 670./ 0. 69./ 0. 61/ 0


88. 592./ 0. 62./ 0. 61/ 0
175. 513./ 0. 54./ 0. 61/ 0
263. 432./ 24. 45./ 3. 61/ 76
350. 351./ 48. 37./ 5. 61/ 76
438. 269./ 73. 29./ 8. 61/ 76
525. 187./ 99. 20./ 11. 61/ 76
613. 117./ 139. 13./ 15. 77/ 60
700. 102./ 236. 11./ 25. 77/ 60
788. 87./ 336. 9./ 36. 77/ 60

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 79 of 131


Thursday, May 30, 2024, 01:40 AM

875. 71./ 439. 8./ 46. 77/ 60


963. 55./ 545. 6./ 57. 77/ 60
1050. 38./ 653. 4./ 68. 77/ 60

B E A M N O. 91 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 112.03 KNS Vc= 107.33 KNS Vs= 42.04 KNS
Tu= 10.87 KN-MET Tc= 4.0 KN-MET Ts= 14.5 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.41 SQ.CM.

AT END SUPPORT - Vu= 115.83 KNS Vc= 107.33 KNS Vs= 47.11 KNS
Tu= 10.87 KN-MET Tc= 4.0 KN-MET Ts= 14.5 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 4.41 SQ.CM.

___ 52J____________________ 1050X 300X 500_____________________ 51J____


| |
||=========================================================================||
| 4No16 H 442.| 0.TO 1050 | | |
| 2*12c/c156 | 2*12c/c156 | |
| 4No16 H 58.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 92 DESIGN RESULTS


=============================================

LEN - 4150. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 2 - 20MM 0. 4150. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 49.91 KN-MET AT 2075.MM, LOAD 65|
| REQD STEEL= 624.MM2, RHO=0.0047, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 184. MMS |
| REQD. DEVELOPMENT LENGTH = 434. MMS |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 80 of 131


Thursday, May 30, 2024, 01:40 AM

|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 77118.9 cm^4

2 442. 2 - 16MM 0. 451. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 14.77 KN-MET AT 0.MM, LOAD 66|
| REQD STEEL= 181.MM2, RHO=0.0014, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

3 442. 2 - 16MM 3180. 4150. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 27.09 KN-MET AT 4150.MM, LOAD 64|
| REQD STEEL= 334.MM2, RHO=0.0025, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 0./ 138. 0./ 15. 0/ 66


346. 44./ 0. 5./ 0. 63/ 0
692. 186./ 0. 20./ 0. 61/ 0
1038. 307./ 0. 33./ 0. 61/ 0
1383. 400./ 0. 42./ 0. 65/ 0
1729. 459./ 0. 48./ 0. 65/ 0
2075. 476./ 0. 50./ 0. 65/ 0
2421. 449./ 0. 47./ 0. 65/ 0
2767. 379./ 0. 40./ 0. 65/ 0
3112. 274./ 0. 29./ 0. 65/ 0
3458. 141./ 0. 15./ 0. 65/ 0
3804. 18./ 70. 2./ 7. 81/ 64
4150. 0./ 255. 0./ 27. 0/ 64

B E A M N O. 92 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 42.23 KNS Vc= 106.18 KNS Vs= 0.00 KNS
Tu= 4.59 KN-MET Tc= 4.0 KN-MET Ts= 6.1 KN-MET LOAD 45
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1635. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.86 SQ.CM.

AT END SUPPORT - Vu= 46.51 KNS Vc= 106.18 KNS Vs= 0.00 KNS
Tu= 4.59 KN-MET Tc= 4.0 KN-MET Ts= 6.1 KN-MET LOAD 45
STIRRUPS ARE REQUIRED FOR TORSION.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 81 of 131


Thursday, May 30, 2024, 01:40 AM

REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.


PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1635. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 1.86 SQ.CM.

___ 52J____________________ 4150X 300X 500_____________________ 53J____


| |
||======= =================||
| 2No16 H 442. 0.TO 451 2No16 H 442.3180.TO 4150 |
| 12*10c/c156 | 12*10c/c156 | |
| 2No20 H 60. 0.TO 4150 | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oo | | | | | | | | oo | | oo |
| 2#16 | | | | | | | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 93 DESIGN RESULTS


=============================================

LEN - 3350. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 4 - 20MM 0. 3350. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 123.57 KN-MET AT 0.MM, LOAD 55|
| REQD STEEL= 1222.MM2, RHO=0.0093, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2037. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 193.27 KN-MET, LOADING 52

2 442. 4 - 16MM 1922. 3350. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 65.30 KN-MET AT 3350.MM, LOAD 55|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 82 of 131


Thursday, May 30, 2024, 01:40 AM

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1236./ 2037. 124./ 193. 55/ 52


279. 1131./ 1640. 114./ 160. 55/ 52
558. 1020./ 1277. 103./ 127. 55/ 52
837. 902./ 945. 92./ 96. 55/ 52
1117. 805./ 673. 83./ 70. 51/ 56
1396. 693./ 426. 72./ 45. 51/ 56
1675. 562./ 199. 59./ 21. 51/ 56
1954. 453./ 27. 48./ 3. 59/ 78
2233. 382./ 0. 40./ 0. 62/ 0
2512. 508./ 54. 53./ 6. 62/ 75
2792. 661./ 213. 68./ 23. 52/ 55
3071. 830./ 415. 85./ 44. 52/ 55
3350. 993./ 629. 101./ 65. 52/ 55

___ 16J____________________ 3349X 300X 500_____________________ 23J____


| |
| ================================||
| 4No16 H 442.1922.TO 3350 |
| |
| 4No20 H 60. 0.TO 3350 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| | | | | | | oooo | | oooo | | oooo |
| | | | | | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 94 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 3 - 25MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 126.87 KN-MET AT 1050.MM, LOAD 56|
| REQD STEEL= 1266.MM2, RHO=0.0096, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 89. MMS |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 83 of 131


Thursday, May 30, 2024, 01:40 AM

|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 145492.4 cm^4

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 1975. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 188.23 KN-MET, LOADING 51

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 977./ 638. 99./ 66. 52/ 55


88. 995./ 727. 101./ 75. 52/ 55
175. 1011./ 817. 103./ 84. 52/ 55
263. 1027./ 909. 104./ 93. 52/ 55
350. 1042./ 1003. 105./ 102. 52/ 55
438. 1071./ 1113. 108./ 112. 56/ 51
525. 1101./ 1228. 111./ 123. 56/ 51
613. 1131./ 1345. 114./ 134. 56/ 51
700. 1160./ 1465. 117./ 144. 56/ 51
788. 1189./ 1587. 119./ 155. 56/ 51
875. 1217./ 1713. 122./ 166. 56/ 51
963. 1245./ 1843. 124./ 177. 56/ 51
1050. 1272./ 1975. 127./ 188. 56/ 51

___ 23J____________________ 1050X 300X 500_____________________ 18J____


| |
| |
| |
| |
| 3No25 H 62. 0.TO 1050 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 | | 3#25 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 95 DESIGN RESULTS


=============================================

LEN - 3650. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 84 of 131


Thursday, May 30, 2024, 01:40 AM

1 60. 4 - 20MM 0. 3650. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 106.20 KN-MET AT 3650.MM, LOAD 52|
| REQD STEEL= 1038.MM2, RHO=0.0079, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2105. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 198.81 KN-MET, LOADING 52

2 442. 4 - 16MM 2134. 3650. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 58.14 KN-MET AT 3650.MM, LOAD 55|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 991./ 2105. 101./ 199. 55/ 52


304. 935./ 1661. 95./ 162. 55/ 52
608. 873./ 1255. 89./ 125. 55/ 52
912. 801./ 886. 82./ 91. 55/ 52
1217. 758./ 594. 78./ 62. 51/ 56
1521. 695./ 335. 72./ 35. 51/ 56
1825. 635./ 116. 66./ 12. 60/ 77
2129. 573./ 0. 60./ 0. 60/ 0
2433. 540./ 0. 56./ 0. 61/ 0
2738. 659./ 43. 68./ 5. 61/ 76
3042. 758./ 173. 78./ 18. 52/ 76
3346. 908./ 350. 93./ 37. 52/ 55
3650. 1050./ 557. 106./ 58. 52/ 55

___ 15J____________________ 3649X 300X 500_____________________ 22J____


| |
| ===============================||
| 4No16 H 442.2134.TO 3650 |
| |
| 4No20 H 60. 0.TO 3650 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| | | | | | | oooo | | oooo | | oooo |
| | | | | | | 4#16 | | 4#16 | | 4#16 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 85 of 131


Thursday, May 30, 2024, 01:40 AM

| | | | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 96 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 4 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 109.19 KN-MET AT 0.MM, LOAD 52|
| REQD STEEL= 1069.MM2, RHO=0.0081, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

*** A SUITABLE BAR ARRANGEMENT COULD NOT BE DETERMINED.


REQD. STEEL = 2096. MM2, MAX. STEEL PERMISSIBLE = 3709. MM2
MAX NEG MOMENT = 198.13 KN-MET, LOADING 51

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 1081./ 529. 109./ 55. 52/ 55


88. 1061./ 630. 107./ 65. 52/ 55
175. 1041./ 732. 105./ 75. 52/ 55
263. 1021./ 835. 103./ 86. 52/ 55
350. 1001./ 942. 102./ 96. 56/ 51
438. 1006./ 1075. 102./ 109. 56/ 51
525. 1011./ 1211. 103./ 121. 56/ 51
613. 1015./ 1350. 103./ 134. 56/ 51
700. 1019./ 1492. 103./ 147. 56/ 51
788. 1023./ 1638. 104./ 160. 56/ 51
875. 1026./ 1787. 104./ 172. 56/ 51
963. 1030./ 1939. 104./ 185. 56/ 51
1050. 1033./ 2096. 105./ 198. 56/ 51

___ 22J____________________ 1050X 300X 500_____________________ 17J____


| |
| |
| |
| |
| 4No20 H 60. 0.TO 1050 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 86 of 131


Thursday, May 30, 2024, 01:40 AM

||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 97 DESIGN RESULTS


=============================================

LEN - 3850. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 5 - 16MM 0. 3850. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 101.83 KN-MET AT 0.MM, LOAD 55|
| REQD STEEL= 987.MM2, RHO=0.0074, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 47. MMS |
| REQD. DEVELOPMENT LENGTH = 591. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 111945.9 cm^4

2 438. 4 - 25MM 0. 3698. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 167.76 KN-MET AT 0.MM, LOAD 52|
| REQD STEEL= 1724.MM2, RHO=0.0131, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

3 442. 4 - 16MM 2276. 3850. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 61.44 KN-MET AT 3850.MM, LOAD 55|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 87 of 131


Thursday, May 30, 2024, 01:40 AM

( MM ) (SQ. MM ) (KNS-MET )

0. 1004./ 1733. 102./ 168. 55/ 52


321. 913./ 1405. 93./ 139. 55/ 52
642. 819./ 1100. 84./ 111. 55/ 52
962. 718./ 817. 74./ 84. 55/ 52
1283. 632./ 578. 66./ 60. 51/ 56
1604. 538./ 359. 56./ 38. 51/ 56
1925. 459./ 166. 48./ 18. 60/ 77
2246. 358./ 24. 38./ 3. 60/ 77
2567. 332./ 0. 35./ 0. 61/ 0
2887. 462./ 117. 49./ 13. 61/ 76
3208. 590./ 257. 61./ 27. 52/ 76
3529. 740./ 407. 76./ 43. 52/ 55
3850. 885./ 590. 91./ 61. 52/ 55

B E A M N O. 97 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.41 KNS Vc= 112.89 KNS Vs= 0.00 KNS
Tu= 6.72 KN-MET Tc= 4.0 KN-MET Ts= 9.0 KN-MET LOAD 54
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1485. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.73 SQ.CM.

AT END SUPPORT - Vu= 11.99 KNS Vc= 101.23 KNS Vs= 0.00 KNS
Tu= 6.72 KN-MET Tc= 4.0 KN-MET Ts= 9.0 KN-MET LOAD 54
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1485. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.73 SQ.CM.

___ 13J____________________ 3849X 300X 500_____________________ 21J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TO 3698| | | | | 4No16|H 442.2276.TO 3850 | | |
| 11*10c/c156 | | | | | | | | | | | | 11*10c/c156 | |
| 5No16 H |58.| 0.TO 3850| | | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 5#16 | | 5#16 | | 5#16 | | 5#16 | | 5#16 | | 5#16 |
| ooooo | | ooooo | | ooooo | | ooooo | | ooooo | | ooooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 98 DESIGN RESULTS


=============================================

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 88 of 131


Thursday, May 30, 2024, 01:40 AM

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 4 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 113.78 KN-MET AT 1050.MM, LOAD 56|
| REQD STEEL= 1118.MM2, RHO=0.0085, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

2 438. 4 - 25MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 157.16 KN-MET AT 1050.MM, LOAD 51|
| REQD STEEL= 1602.MM2, RHO=0.0122, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 870./ 609. 89./ 63. 52/ 55


88. 884./ 677. 90./ 70. 52/ 55
175. 898./ 747. 92./ 77. 52/ 55
263. 911./ 817. 93./ 84. 52/ 55
350. 935./ 898. 95./ 92. 56/ 51
438. 960./ 982. 98./ 100. 56/ 51
525. 985./ 1067. 100./ 108. 56/ 51
613. 1009./ 1154. 102./ 116. 56/ 51
700. 1034./ 1242. 105./ 124. 56/ 51
788. 1058./ 1332. 107./ 132. 56/ 51
875. 1083./ 1423. 109./ 141. 56/ 51
963. 1107./ 1516. 112./ 149. 56/ 51
1050. 1130./ 1610. 114./ 157. 56/ 51

B E A M N O. 98 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 53.66 KNS Vc= 114.70 KNS Vs= 0.00 KNS
Tu= 20.98 KN-MET Tc= 4.0 KN-MET Ts= 28.0 KN-MET LOAD 54
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.52 SQ.CM.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 89 of 131


Thursday, May 30, 2024, 01:40 AM

AT END SUPPORT - Vu= 54.38 KNS Vc= 114.70 KNS Vs= 0.00 KNS
Tu= 20.98 KN-MET Tc= 4.0 KN-MET Ts= 28.0 KN-MET LOAD 54
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.52 SQ.CM.

___ 21J____________________ 1050X 300X 500_____________________ 14J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TO 1050 | | |
| 2*16c/c156 | 2*16c/c156 | |
| 4No20 H 60.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 99 DESIGN RESULTS


=============================================

LEN - 2200. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 2200. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 71.56 KN-MET AT 0.MM, LOAD 57|
| REQD STEEL= 681.MM2, RHO=0.0051, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 440. 3 - 20MM 0. 2030. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 94.97 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 922.MM2, RHO=0.0070, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 92. MMS |
| REQD. DEVELOPMENT LENGTH = 472. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 105406.1 cm^4

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 90 of 131


Thursday, May 30, 2024, 01:40 AM

3 442. 2 - 16MM 1291. 2200. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 15.80 KN-MET AT 2200.MM, LOAD 80|
| REQD STEEL= 194.MM2, RHO=0.0015, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 692./ 932. 72./ 95. 57/ 65


183. 629./ 789. 65./ 81. 57/ 54
367. 565./ 660. 59./ 68. 57/ 54
550. 501./ 534. 52./ 56. 57/ 54
733. 436./ 411. 46./ 43. 57/ 54
917. 378./ 300. 40./ 32. 53/ 58
1100. 324./ 199. 34./ 21. 53/ 81
1283. 276./ 115. 29./ 12. 64/ 81
1467. 245./ 31. 26./ 3. 64/ 81
1650. 236./ 0. 25./ 0. 59/ 0
1833. 333./ 17. 35./ 2. 65/ 80
2017. 449./ 82. 47./ 9. 65/ 80
2200. 565./ 148. 59./ 16. 65/ 80

B E A M N O. 99 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 30.75 KNS Vc= 107.61 KNS Vs= 0.00 KNS
Tu= 20.77 KN-MET Tc= 4.0 KN-MET Ts= 27.7 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 660. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.43 SQ.CM.

AT END SUPPORT - Vu= 22.91 KNS Vc= 100.17 KNS Vs= 0.00 KNS
Tu= 20.77 KN-MET Tc= 4.0 KN-MET Ts= 27.7 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 660. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.43 SQ.CM.

___ 25J____________________ 2200X 300X 500_____________________ 31J____


| |
||=========================================================================||
| 3No20 H 440.| 0.TO 2030| | |2No16|H 442.1291.TO 2200 | |
| 6*16c/c156 | | | | | | | 6*16c/c156 | |
| 4No16 H 58.| 0.TO 2200| | | | | | | | |
||=========================================================================||

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 91 of 131


Thursday, May 30, 2024, 01:40 AM

|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | oo |
| 3#20 | | 3#20 | | 3#20 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 100 DESIGN RESULTS


=============================================

LEN - 700. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 700. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 70.10 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 667.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 700. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 81.43 KN-MET AT 700.MM, LOAD 53|
| REQD STEEL= 780.MM2, RHO=0.0059, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 677./ 134. 70./ 14. 65/ 80


58. 643./ 169. 67./ 18. 65/ 80
117. 608./ 203. 63./ 22. 65/ 80
175. 573./ 238. 60./ 25. 65/ 80
233. 537./ 278. 56./ 30. 65/ 57
292. 502./ 332. 52./ 35. 65/ 57
350. 469./ 387. 49./ 41. 54/ 57
408. 449./ 443. 47./ 46. 54/ 57
467. 432./ 501. 45./ 52. 58/ 53
525. 427./ 573. 45./ 60. 58/ 53

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 92 of 131


Thursday, May 30, 2024, 01:40 AM

583. 424./ 645. 45./ 67. 81/ 53


642. 432./ 718. 45./ 74. 81/ 53
700. 441./ 792. 46./ 81. 81/ 53

B E A M N O. 100 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 100 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 100 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 31J____________________ 700X 300X 500_____________________ 28J____


| |
||=========================================================================||
| 4No16 H 442. 0.TO 700 |
| |
| 4No16 H 58. 0.TO 700 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 101 DESIGN RESULTS


=============================================

LEN - 3350. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 62. 2 - 25MM 0. 3350. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 101.16 KN-MET AT 0.MM, LOAD 55|
| REQD STEEL= 981.MM2, RHO=0.0074, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 179. MMS |
| REQD. DEVELOPMENT LENGTH = 542. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 109898.6 cm^4

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 93 of 131


Thursday, May 30, 2024, 01:40 AM

2 438. 4 - 25MM 0. 3350. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 168.74 KN-MET AT 0.MM, LOAD 52|
| REQD STEEL= 1735.MM2, RHO=0.0132, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

3 442. 4 - 16MM 1922. 3350. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 52.40 KN-MET AT 3350.MM, LOAD 55|
| REQD STEEL= 656.MM2, RHO=0.0049, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 997./ 1744. 101./ 169. 55/ 52


279. 915./ 1415. 93./ 140. 55/ 52
558. 829./ 1109. 85./ 112. 55/ 52
837. 737./ 824. 76./ 85. 55/ 52
1117. 656./ 580. 68./ 60. 51/ 56
1396. 572./ 367. 60./ 39. 51/ 56
1675. 471./ 171. 49./ 18. 51/ 56
1954. 395./ 32. 42./ 3. 59/ 78
2233. 333./ 0. 35./ 0. 62/ 0
2512. 458./ 52. 48./ 6. 62/ 75
2792. 574./ 167. 60./ 18. 52/ 75
3071. 724./ 329. 75./ 35. 52/ 55
3350. 871./ 501. 89./ 52. 52/ 55

B E A M N O. 101 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 99.46 KNS Vc= 102.05 KNS Vs= 30.56 KNS
Tu= 6.51 KN-MET Tc= 4.0 KN-MET Ts= 8.7 KN-MET LOAD 62
STIRRUPS ARE REQUIRED FOR SHEAR AND TORSION.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1235. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.64 SQ.CM.

AT END SUPPORT - Vu= 7.48 KNS Vc= 96.56 KNS Vs= 0.00 KNS
Tu= 9.62 KN-MET Tc= 4.0 KN-MET Ts= 12.8 KN-MET LOAD 63
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1235. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.91 SQ.CM.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 94 of 131


Thursday, May 30, 2024, 01:40 AM

___ 27J____________________ 3349X 300X 500_____________________ 33J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TO 3350| | | | 4No16 H 442.1922.TO 3350 | | |
| 9*10c/c156 | | | | | | | | | | | 9*10c/c156 | |
| 2No25 H |62.| 0.TO 3350| | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 2#25 | | 2#25 | | 2#25 | | 2#25 | | 2#25 | | 2#25 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 102 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 4 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 103.72 KN-MET AT 1050.MM, LOAD 56|
| REQD STEEL= 1012.MM2, RHO=0.0077, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

2 438. 4 - 25MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 166.89 KN-MET AT 1050.MM, LOAD 51|
| REQD STEEL= 1714.MM2, RHO=0.0131, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 50./ 60. MMS |
| REQD. DEVELOPMENT LENGTH = 1137. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 178285.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 832./ 525. 85./ 55. 52/ 55


88. 838./ 606. 86./ 63. 52/ 55

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 95 of 131


Thursday, May 30, 2024, 01:40 AM

175. 844./ 687. 87./ 71. 52/ 55


263. 850./ 770. 87./ 79. 52/ 55
350. 861./ 860. 88./ 88. 56/ 51
438. 882./ 961. 90./ 98. 56/ 51
525. 903./ 1064. 92./ 108. 56/ 51
613. 923./ 1169. 94./ 117. 56/ 51
700. 944./ 1275. 96./ 127. 56/ 51
788. 964./ 1384. 98./ 137. 56/ 51
875. 984./ 1495. 100./ 147. 56/ 51
963. 1004./ 1607. 102./ 157. 56/ 51
1050. 1024./ 1722. 104./ 167. 56/ 51

B E A M N O. 102 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 72.10 KNS Vc= 112.88 KNS Vs= 0.00 KNS
Tu= 29.20 KN-MET Tc= 4.0 KN-MET Ts= 38.9 KN-MET LOAD 64
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 11.85 SQ.CM.

AT END SUPPORT - Vu= 73.10 KNS Vc= 112.88 KNS Vs= 0.00 KNS
Tu= 29.20 KN-MET Tc= 4.0 KN-MET Ts= 38.9 KN-MET LOAD 64
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 11.85 SQ.CM.

___ 33J____________________ 1050X 300X 500_____________________ 29J____


| |
||=========================================================================||
| 4No25 H 438.| 0.TO 1050 | | |
| 2*16c/c156 | 2*16c/c156 | |
| 4No20 H 60.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 | | 4#25 |
| | | | | | | | | | | |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 103 DESIGN RESULTS


=============================================

LEN - 2200. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 96 of 131


Thursday, May 30, 2024, 01:40 AM

(MM) (MM) (MM) STA END


_____________________________________________________________________

1 58. 4 - 16MM 0. 2200. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 51.61 KN-MET AT 2200.MM, LOAD 65|
| REQD STEEL= 646.MM2, RHO=0.0049, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 1918. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 73.67 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 702.MM2, RHO=0.0053, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 442. 2 - 16MM 1474. 2200. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 5.90 KN-MET AT 2200.MM, LOAD 80|
| REQD STEEL= 72.MM2, RHO=0.0005, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 351./ 713. 37./ 74. 80/ 65


183. 319./ 597. 34./ 62. 80/ 65
367. 286./ 485. 30./ 51. 80/ 65
550. 254./ 376. 27./ 40. 80/ 65
733. 221./ 271. 24./ 29. 80/ 65
917. 199./ 180. 21./ 19. 64/ 81
1100. 207./ 122. 22./ 13. 64/ 81
1283. 213./ 64. 23./ 7. 64/ 81
1467. 217./ 7. 23./ 1. 64/ 81
1650. 227./ 0. 24./ 0. 60/ 0
1833. 309./ 0. 33./ 0. 65/ 0
2017. 401./ 19. 42./ 2. 65/ 80
2200. 493./ 55. 52./ 6. 65/ 80

B E A M N O. 103 D E S I G N R E S U L T S - SHEAR

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 97 of 131


Thursday, May 30, 2024, 01:40 AM

AT START SUPPORT - Vu= 33.78 KNS Vc= 107.00 KNS Vs= 0.00 KNS
Tu= 19.31 KN-MET Tc= 4.0 KN-MET Ts= 25.7 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 660. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 7.84 SQ.CM.

AT END SUPPORT - Vu= 25.94 KNS Vc= 100.59 KNS Vs= 0.00 KNS
Tu= 19.31 KN-MET Tc= 4.0 KN-MET Ts= 25.7 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 660. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 7.84 SQ.CM.

___ 35J____________________ 2200X 300X 500_____________________ 41J____


| |
||=========================================================================||
| 4No16 H 442.| 0.TO 1918| | | |2No16|H 442.1474.TO 2200 |
| 6*16c/c156 | | | | | | | 6*16c/c156 | |
| 4No16 H 58.| 0.TO 2200| | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 104 DESIGN RESULTS


=============================================

LEN - 700. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 700. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 62.01 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 700. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 55.18 KN-MET AT 700.MM, LOAD 64|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 98 of 131


Thursday, May 30, 2024, 01:40 AM

| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |


| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 596./ 44. 62./ 5. 65/ 80


58. 555./ 69. 58./ 7. 65/ 80
117. 514./ 94. 54./ 10. 65/ 80
175. 473./ 120. 50./ 13. 65/ 80
233. 431./ 145. 45./ 16. 65/ 80
292. 389./ 171. 41./ 18. 65/ 80
350. 347./ 197. 37./ 21. 65/ 80
408. 305./ 223. 32./ 24. 65/ 80
467. 262./ 250. 28./ 27. 65/ 80
525. 254./ 311. 27./ 33. 81/ 64
583. 254./ 382. 27./ 40. 81/ 64
642. 255./ 455. 27./ 48. 81/ 64
700. 255./ 528. 27./ 55. 81/ 64

B E A M N O. 104 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 104 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 104 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 41J____________________ 700X 300X 500_____________________ 38J____


| |
||=========================================================================||
| 4No16 H 442. 0.TO 700 |
| |
| 4No16 H 58. 0.TO 700 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 99 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 BEAM NO. 105 DESIGN RESULTS


=============================================

LEN - 3350. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 3350. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 62.48 KN-MET AT 3350.MM, LOAD 62|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 440. 4 - 20MM 0. 2605. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 120.14 KN-MET AT 0.MM, LOAD 62|
| REQD STEEL= 1185.MM2, RHO=0.0090, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

3 442. 2 - 16MM 1922. 3350. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 28.59 KN-MET AT 3350.MM, LOAD 75|
| REQD STEEL= 353.MM2, RHO=0.0027, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 522./ 1199. 55./ 120. 75/ 62


279. 477./ 931. 50./ 95. 75/ 62
558. 433./ 701. 46./ 72. 55/ 52
837. 411./ 497. 43./ 52. 55/ 52
1117. 396./ 327. 42./ 35. 51/ 56
1396. 393./ 193. 41./ 21. 59/ 78
1675. 389./ 95. 41./ 10. 59/ 78
1954. 356./ 5. 38./ 1. 59/ 78
2233. 320./ 0. 34./ 0. 62/ 0
2512. 409./ 16. 43./ 2. 62/ 75

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 100 of 131


Thursday, May 30, 2024, 01:40 AM

2792. 484./ 97. 51./ 10. 62/ 75


3071. 546./ 182. 57./ 19. 62/ 75
3350. 601./ 269. 62./ 29. 62/ 75

B E A M N O. 105 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 56.61 KNS Vc= 106.07 KNS Vs= 0.00 KNS
Tu= 8.58 KN-MET Tc= 4.0 KN-MET Ts= 11.4 KN-MET LOAD 63
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1235. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.48 SQ.CM.

AT END SUPPORT - Vu= 7.47 KNS Vc= 97.04 KNS Vs= 0.00 KNS
Tu= 8.58 KN-MET Tc= 4.0 KN-MET Ts= 11.4 KN-MET LOAD 63
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1235. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 3.48 SQ.CM.

___ 37J____________________ 3349X 300X 500_____________________ 43J____


| |
||=========================================================================||
| 4No20 H 440.| 0.TO 2605| | | | 2No16 H 442.1922.TO 3350 | | |
| 9*10c/c156 | | | | | | | | | | | 9*10c/c156 | |
| 4No16 H |58.| 0.TO 3350| | | | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oo | | oo |
| 4#20 | | 4#20 | | 4#20 | | 2#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 106 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 57.44 KN-MET AT 0.MM, LOAD 62|
| REQD STEEL= 665.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 101 of 131


Thursday, May 30, 2024, 01:40 AM

| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |


| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 440. 4 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 122.34 KN-MET AT 1050.MM, LOAD 59|
| REQD STEEL= 1209.MM2, RHO=0.0092, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 61. MMS |
| REQD. DEVELOPMENT LENGTH = 708. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 131166.9 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 551./ 282. 57./ 30. 62/ 75


88. 528./ 324. 55./ 34. 52/ 55
175. 513./ 382. 54./ 40. 52/ 55
263. 497./ 442. 52./ 46. 52/ 55
350. 488./ 510. 51./ 53. 56/ 51
438. 487./ 586. 51./ 61. 56/ 51
525. 486./ 663. 51./ 69. 56/ 51
613. 484./ 741. 51./ 76. 56/ 51
700. 482./ 830. 50./ 85. 56/ 59
788. 486./ 925. 51./ 94. 78/ 59
875. 497./ 1023. 52./ 104. 78/ 59
963. 508./ 1122. 53./ 113. 78/ 59
1050. 519./ 1223. 54./ 122. 78/ 59

B E A M N O. 106 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 72.84 KNS Vc= 107.33 KNS Vs= 0.00 KNS
Tu= 26.29 KN-MET Tc= 4.0 KN-MET Ts= 35.0 KN-MET LOAD 64
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 10.67 SQ.CM.

AT END SUPPORT - Vu= 73.85 KNS Vc= 107.33 KNS Vs= 0.00 KNS
Tu= 26.29 KN-MET Tc= 4.0 KN-MET Ts= 35.0 KN-MET LOAD 64
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 10.67 SQ.CM.

___ 43J____________________ 1050X 300X 500_____________________ 39J____


| |
||=========================================================================||

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 102 of 131


Thursday, May 30, 2024, 01:40 AM

| 4No20 H 440.| 0.TO 1050 | | |


| 2*16c/c156 | 2*16c/c156 | |
| 4No16 H 58.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 | | 4#20 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 107 DESIGN RESULTS


=============================================

LEN - 2200. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 3 - 16MM 0. 2200. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 41.54 KN-MET AT 2200.MM, LOAD 65|
| REQD STEEL= 517.MM2, RHO=0.0039, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

2 442. 3 - 16MM 0. 1734. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 35.46 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 440.MM2, RHO=0.0033, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 112./ 336. 12./ 35. 80/ 65


183. 109./ 263. 12./ 28. 80/ 65
367. 106./ 194. 11./ 21. 80/ 65
550. 102./ 126. 11./ 14. 80/ 65
733. 121./ 84. 13./ 9. 64/ 81

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 103 of 131


Thursday, May 30, 2024, 01:40 AM

917. 153./ 57. 16./ 6. 64/ 81


1100. 183./ 31. 19./ 3. 64/ 81
1283. 211./ 6. 22./ 1. 64/ 81
1467. 238./ 0. 25./ 0. 64/ 0
1650. 262./ 0. 28./ 0. 64/ 0
1833. 290./ 0. 31./ 0. 65/ 0
2017. 343./ 0. 36./ 0. 65/ 0
2200. 394./ 0. 42./ 0. 65/ 0

B E A M N O. 107 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 29.14 KNS Vc= 104.77 KNS Vs= 0.00 KNS
Tu= 15.10 KN-MET Tc= 4.0 KN-MET Ts= 20.1 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 660. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 6.13 SQ.CM.

AT END SUPPORT - Vu= 21.30 KNS Vc= 98.77 KNS Vs= 0.00 KNS
Tu= 15.10 KN-MET Tc= 4.0 KN-MET Ts= 20.1 KN-MET LOAD 60
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 12 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 660. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 6.13 SQ.CM.

___ 45J____________________ 2200X 300X 500_____________________ 51J____


| |
||========================================================== |
| 3No16 H 442.| 0.TO 1734| | | | | |
| 6*12c/c156 | | | | | | | 6*12c/c156 |
| 3No16 H 58.| 0.TO 2200| | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | | | |
| | | | | | | | | | | |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 108 DESIGN RESULTS


=============================================

LEN - 700. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 104 of 131


Thursday, May 30, 2024, 01:40 AM

1 58. 4 - 16MM 0. 700. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 52.61 KN-MET AT 0.MM, LOAD 65|
| REQD STEEL= 659.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 3 - 16MM 0. 700. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 34.75 KN-MET AT 700.MM, LOAD 64|
| REQD STEEL= 431.MM2, RHO=0.0032, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 94. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 74613.0 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 503./ 0. 53./ 0. 65/ 0


58. 450./ 0. 47./ 0. 65/ 0
117. 397./ 0. 42./ 0. 65/ 0
175. 344./ 0. 36./ 0. 65/ 0
233. 292./ 6. 31./ 1. 65/ 80
292. 238./ 23. 25./ 2. 65/ 80
350. 185./ 40. 20./ 4. 65/ 80
408. 132./ 58. 14./ 6. 65/ 80
467. 79./ 75. 8./ 8. 65/ 80
525. 67./ 135. 7./ 14. 81/ 64
583. 58./ 199. 6./ 21. 81/ 64
642. 48./ 263. 5./ 28. 81/ 64
700. 39./ 329. 4./ 35. 81/ 64

B E A M N O. 108 D E S I G N R E S U L T S - SHEAR

** LOCATION FOR DESIGN FOR SHEAR AT START OF MEMBER 108 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

** LOCATION FOR DESIGN FOR SHEAR AT END OF MEMBER 108 IS BEYOND


THE MIDPOINT OF MEMBER. DESIGN FOR SHEAR AND TORSION NOT PERFORMED.

___ 51J____________________ 700X 300X 500_____________________ 48J____


| |
||=========================================================================||
| 3No16 H 442. 0.TO 700 |

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 105 of 131


Thursday, May 30, 2024, 01:40 AM

| |
| 4No16 H 58. 0.TO 700 |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| ooo | | ooo | | ooo | | ooo | | ooo | | ooo |
| 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 | | 3#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

ACI 318-11 BEAM NO. 109 DESIGN RESULTS


=============================================

LEN - 3350. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 58. 4 - 16MM 0. 3350. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 52.97 KN-MET AT 3350.MM, LOAD 62|
| REQD STEEL= 663.MM2, RHO=0.0050, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

2 442. 4 - 16MM 0. 2126. YES NO


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 78.26 KN-MET AT 0.MM, LOAD 62|
| REQD STEEL= 748.MM2, RHO=0.0056, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

3 442. 2 - 16MM 2480. 3350. NO YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 9.13 KN-MET AT 3350.MM, LOAD 75|
| REQD STEEL= 112.MM2, RHO=0.0008, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 188. MMS |
| REQD. DEVELOPMENT LENGTH = 347. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 53206.6 cm^4

REQUIRED REINF. STEEL SUMMARY :

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 106 of 131


Thursday, May 30, 2024, 01:40 AM

-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 215./ 760. 23./ 78. 75/ 62


279. 212./ 549. 23./ 57. 75/ 62
558. 206./ 354. 22./ 37. 75/ 62
837. 213./ 189. 23./ 20. 59/ 78
1117. 294./ 122. 31./ 13. 59/ 78
1396. 354./ 59. 37./ 6. 59/ 78
1675. 391./ 3. 41./ 0. 59/ 78
1954. 399./ 0. 42./ 0. 59/ 0
2233. 393./ 0. 41./ 0. 62/ 0
2512. 442./ 0. 46./ 0. 62/ 0
2792. 474./ 0. 50./ 0. 62/ 0
3071. 494./ 39. 52./ 4. 62/ 75
3350. 506./ 85. 53./ 9. 62/ 75

B E A M N O. 109 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 56.43 KNS Vc= 107.30 KNS Vs= 0.00 KNS
Tu= 6.50 KN-MET Tc= 4.0 KN-MET Ts= 8.7 KN-MET LOAD 63
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1235. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.64 SQ.CM.

AT END SUPPORT - Vu= 7.65 KNS Vc= 96.83 KNS Vs= 0.00 KNS
Tu= 6.50 KN-MET Tc= 4.0 KN-MET Ts= 8.7 KN-MET LOAD 63
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 10 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 1235. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 2.64 SQ.CM.

___ 47J____________________ 3349X 300X 500_____________________ 53J____


| |
||=============================================== ===================||
| 4No16 H 442.| 0.TO 2126| | | | | 2No16 H|442.2480.TO|3350 |
| 9*10c/c156 | | | | | | | | | 9*10c/c156 | |
| 4No16 H |58.| 0.TO 3350| | | | | | | | | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oo | | oo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 2#16 | | 2#16 |
| | | | | | | | | | | |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 107 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 BEAM NO. 110 DESIGN RESULTS


=============================================

LEN - 1050. MM FY - 275. FC - 21. MPA, SIZE - 300. X 500. MMS

LEVEL HEIGHT BAR INFO FROM TO ANCHOR


(MM) (MM) (MM) STA END
_____________________________________________________________________

1 60. 2 - 20MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL POS MOMENT= 48.33 KN-MET AT 0.MM, LOAD 62|
| REQD STEEL= 606.MM2, RHO=0.0046, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 45./ 184. MMS |
| REQD. DEVELOPMENT LENGTH = 434. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 76358.5 cm^4

2 442. 4 - 16MM 0. 1050. YES YES


|----------------------------------------------------------------|
| CRITICAL NEG MOMENT= 79.57 KN-MET AT 1050.MM, LOAD 59|
| REQD STEEL= 761.MM2, RHO=0.0057, RHOMX=0.0284 RHOMN=0.0050 |
| MAX/MIN/ACTUAL BAR SPACING= 448./ 41./ 63. MMS |
| REQD. DEVELOPMENT LENGTH = 443. MMS |
|----------------------------------------------------------------|

Cracked Moment of Inertia Iz at above location = 94052.5 cm^4

REQUIRED REINF. STEEL SUMMARY :


-------------------------------
SECTION REINF STEEL(+VE/-VE) MOMENTS(+VE/-VE) LOAD(+VE/-VE)
( MM ) (SQ. MM ) (KNS-MET )

0. 461./ 98. 48./ 11. 62/ 75


88. 413./ 124. 43./ 13. 62/ 75
175. 366./ 150. 39./ 16. 62/ 75
263. 318./ 176. 34./ 19. 62/ 75
350. 270./ 202. 29./ 22. 62/ 75
438. 227./ 233. 24./ 25. 78/ 59
525. 225./ 306. 24./ 32. 78/ 59
613. 223./ 381. 24./ 40. 78/ 59
700. 222./ 457. 24./ 48. 78/ 59
788. 220./ 534. 23./ 56. 78/ 59
875. 218./ 613. 23./ 64. 78/ 59
963. 216./ 692. 23./ 72. 78/ 59
1050. 214./ 773. 23./ 80. 78/ 59

B E A M N O. 110 D E S I G N R E S U L T S - SHEAR

AT START SUPPORT - Vu= 72.27 KNS Vc= 105.88 KNS Vs= 0.00 KNS
Tu= 20.65 KN-MET Tc= 4.0 KN-MET Ts= 27.5 KN-MET LOAD 64
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 108 of 131


Thursday, May 30, 2024, 01:40 AM

PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM


ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.38 SQ.CM.

AT END SUPPORT - Vu= 73.28 KNS Vc= 105.88 KNS Vs= 0.00 KNS
Tu= 20.65 KN-MET Tc= 4.0 KN-MET Ts= 27.5 KN-MET LOAD 64
STIRRUPS ARE REQUIRED FOR TORSION.
REINFORCEMENT FOR SHEAR IS PER CL.11.5.5.1.
PROVIDE 16 MM 2-LEGGED STIRRUPS AT 156. MM C/C FOR 85. MM
ADDITIONAL LONGITUDINAL STEEL REQD. FOR TORSIONAL RESISTANCE = 8.38 SQ.CM.

___ 53J____________________ 1050X 300X 500_____________________ 49J____


| |
||=========================================================================||
| 4No16 H 442.| 0.TO 1050 | | |
| 2*16c/c156 | 2*16c/c156 | |
| 2No20 H 60.| 0.TO 1050 | | |
||=========================================================================||
| |
|___________________________________________________________________________|
_________ _________ _________ _________ _________ _________
| | | | | | | | | | | |
| oooo | | oooo | | oooo | | oooo | | oooo | | oooo |
| 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 | | 4#16 |
| | | | | | | | | | | |
| 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 | | 2#20 |
| oo | | oo | | oo | | oo | | oo | | oo |
| | | | | | | | | | | |
|_________| |_________| |_________| |_________| |_________| |_________|

********************END OF BEAM DESIGN**************************

351. DESIGN COLUMN 1 TO 6 14 TO 19 32 TO 37 53 TO 58 73 TO 78

ACI 318-11 COLUMN NO. 1 DESIGN RESULTS


===============================================

*** NO PROPER BAR ARRANGEMENT IS POSSIBLE.

AREA OF STEEL REQUIRED = 7788.0 SQ. MM

ACI 318-11 COLUMN NO. 2 DESIGN RESULTS


===============================================

*** NO PROPER BAR ARRANGEMENT IS POSSIBLE.

AREA OF STEEL REQUIRED = 7554.0 SQ. MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 109 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 COLUMN NO. 3 DESIGN RESULTS


===============================================

*** NO PROPER BAR ARRANGEMENT IS POSSIBLE.

AREA OF STEEL REQUIRED = 7554.0 SQ. MM

ACI 318-11 COLUMN NO. 4 DESIGN RESULTS


===============================================

*** NO PROPER BAR ARRANGEMENT IS POSSIBLE.

AREA OF STEEL REQUIRED = 6267.0 SQ. MM

ACI 318-11 COLUMN NO. 5 DESIGN RESULTS


===============================================

*** NO PROPER BAR ARRANGEMENT IS POSSIBLE.

AREA OF STEEL REQUIRED = 7203.0 SQ. MM

ACI 318-11 COLUMN NO. 6 DESIGN RESULTS


===============================================

*** NO PROPER BAR ARRANGEMENT IS POSSIBLE.

AREA OF STEEL REQUIRED = 5916.0 SQ. MM

ACI 318-11 COLUMN NO. 14 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3342.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 2.513 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 110 of 131


Thursday, May 30, 2024, 01:40 AM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1513.81 310.80 205.3
M0 P-tens. Des.Pn Des.Mn e/h
212.54 -1036.73 68.63 15.02 0.07817
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1360.92 171.71 126.2
M0 P-tens. Des.Pn Des.Mn e/h
114.56 -1036.73 68.63 104.36 0.54305
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2693.12 181.49 1346.56 311.94
P0 |* 2468.70 211.64 1122.13 310.24
| * 2244.27 239.46 897.71 305.77
Pn,max|__* 2019.84 264.43 673.28 291.91
| * 1795.42 287.22 448.85 271.31
Pn | * 1570.99 306.21 224.43 248.36
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2693.12 101.53 1346.56 171.70
COMPRESSION| * 2468.70 117.83 1122.13 170.41
Pb|-------*Mb 2244.27 132.35 897.71 167.42
| * 2019.84 144.91 673.28 160.74
___________|____*_______ 1795.42 154.92 448.85 149.29
| * M0 Mn, 1570.99 163.92 224.43 134.40
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 15 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3225.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 2.513 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1513.81 310.80 205.3
M0 P-tens. Des.Pn Des.Mn e/h
212.54 -1036.73 56.74 2.95 0.01854
--------------------------------------------------------

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 111 of 131


Thursday, May 30, 2024, 01:40 AM

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1360.92 171.71 126.2
M0 P-tens. Des.Pn Des.Mn e/h
114.56 -1036.73 56.74 103.17 0.64932
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2693.12 181.49 1346.56 311.94
P0 |* 2468.70 211.64 1122.13 310.24
| * 2244.27 239.46 897.71 305.77
Pn,max|__* 2019.84 264.43 673.28 291.91
| * 1795.42 287.22 448.85 271.31
Pn | * 1570.99 306.21 224.43 248.36
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2693.12 101.53 1346.56 171.70
COMPRESSION| * 2468.70 117.83 1122.13 170.41
Pb|-------*Mb 2244.27 132.35 897.71 167.42
| * 2019.84 144.91 673.28 160.74
___________|____*_______ 1795.42 154.92 448.85 149.29
| * M0 Mn, 1570.99 163.92 224.43 134.40
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 16 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4629.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 25 MM 3.927 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
4192.23 3353.78 1562.20 388.87 248.9
M0 P-tens. Des.Pn Des.Mn e/h
319.23 -1619.87 484.04 17.35 0.01280
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
4192.23 3353.78 1371.55 208.89 152.3
M0 P-tens. Des.Pn Des.Mn e/h
166.33 -1619.87 484.04 165.77 0.12231

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 112 of 131


Thursday, May 30, 2024, 01:40 AM

--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 3095.80 207.73 1547.90 389.06
P0 |* 2837.81 243.83 1289.92 390.39
| * 2579.83 278.14 1031.93 388.64
Pn,max|__* 2321.85 309.86 773.95 384.88
| * 2063.87 339.64 515.97 366.67
Pn | * 1805.88 365.90 257.98 343.81
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 3095.80 113.51 1547.90 201.53
COMPRESSION| * 2837.81 133.38 1289.92 208.79
Pb|-------*Mb 2579.83 149.95 1031.93 207.32
| * 2321.85 165.76 773.95 204.59
___________|____*_______ 2063.87 178.45 515.97 196.73
| * M0 Mn, 1805.88 190.21 257.98 183.51
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 17 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2874.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 2.513 58 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1513.81 310.80 205.3
M0 P-tens. Des.Pn Des.Mn e/h
212.54 -1036.73 168.32 27.04 0.05738
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1360.92 171.71 126.2
M0 P-tens. Des.Pn Des.Mn e/h
114.56 -1036.73 168.32 97.57 0.20702
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2693.12 181.49 1346.56 311.94
P0 |* 2468.70 211.64 1122.13 310.24
| * 2244.27 239.46 897.71 305.77
Pn,max|__* 2019.84 264.43 673.28 291.91
| * 1795.42 287.22 448.85 271.31

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 113 of 131


Thursday, May 30, 2024, 01:40 AM

NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2693.12 101.53 1346.56 171.70
COMPRESSION| * 2468.70 117.83 1122.13 170.41
Pb|-------*Mb 2244.27 132.35 897.71 167.42
| * 2019.84 144.91 673.28 160.74
___________|____*_______ 1795.42 154.92 448.85 149.29
| * M0 Mn, 1570.99 163.92 224.43 134.40
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 18 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 4512.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 25 MM 3.927 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
4192.23 3353.78 1562.20 388.87 248.9
M0 P-tens. Des.Pn Des.Mn e/h
319.23 -1619.87 488.44 22.48 0.01644
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
4192.23 3353.78 1371.55 208.89 152.3
M0 P-tens. Des.Pn Des.Mn e/h
166.33 -1619.87 488.44 159.89 0.11691
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 3095.80 207.73 1547.90 389.06
P0 |* 2837.81 243.83 1289.92 390.39
| * 2579.83 278.14 1031.93 388.64
Pn,max|__* 2321.85 309.86 773.95 384.88
| * 2063.87 339.64 515.97 366.67
Pn | * 1805.88 365.90 257.98 343.81
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 3095.80 113.51 1547.90 201.53
COMPRESSION| * 2837.81 133.38 1289.92 208.79
Pb|-------*Mb 2579.83 149.95 1031.93 207.32
| * 2321.85 165.76 773.95 204.59
___________|____*_______ 2063.87 178.45 515.97 196.73
| * M0 Mn, 1805.88 190.21 257.98 183.51
| * BENDING

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 114 of 131


Thursday, May 30, 2024, 01:40 AM

P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 19 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2640.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 2.513 81 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1513.81 310.80 205.3
M0 P-tens. Des.Pn Des.Mn e/h
212.54 -1036.73 10.96 17.37 0.56624
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1360.92 171.71 126.2
M0 P-tens. Des.Pn Des.Mn e/h
114.56 -1036.73 10.96 80.37 2.61925
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2693.12 181.49 1346.56 311.94
P0 |* 2468.70 211.64 1122.13 310.24
| * 2244.27 239.46 897.71 305.77
Pn,max|__* 2019.84 264.43 673.28 291.91
| * 1795.42 287.22 448.85 271.31
Pn | * 1570.99 306.21 224.43 248.36
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2693.12 101.53 1346.56 171.70
COMPRESSION| * 2468.70 117.83 1122.13 170.41
Pb|-------*Mb 2244.27 132.35 897.71 167.42
| * 2019.84 144.91 673.28 160.74
___________|____*_______ 1795.42 154.92 448.85 149.29
| * M0 Mn, 1570.99 163.92 224.43 134.40
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 32 DESIGN RESULTS


===============================================

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 115 of 131


Thursday, May 30, 2024, 01:40 AM

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2406.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 16 MM 1.609 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1482.40 259.89 175.3
M0 P-tens. Des.Pn Des.Mn e/h
139.92 -663.51 103.55 24.11 0.08316
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1352.88 147.00 108.7
M0 P-tens. Des.Pn Des.Mn e/h
77.93 -663.51 103.55 79.96 0.27578
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2435.40 163.91 1217.70 260.00
P0 |* 2232.45 189.92 1014.75 255.79
| * 2029.50 213.05 811.80 246.00
Pn,max|__* 1826.55 233.03 608.85 228.10
| * 1623.60 249.98 405.90 206.70
Pn | * 1420.65 260.57 202.95 178.12
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2435.40 93.48 1217.70 146.39
COMPRESSION| * 2232.45 107.87 1014.75 143.67
Pb|-------*Mb 2029.50 120.24 811.80 138.70
| * 1826.55 130.39 608.85 128.43
___________|____*_______ 1623.60 138.30 405.90 115.65
| * M0 Mn, 1420.65 144.98 202.95 98.22
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 33 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2172.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 16 MM 1.609 57 END 0.650

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 116 of 131


Thursday, May 30, 2024, 01:40 AM

(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)


TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1482.40 259.89 175.3
M0 P-tens. Des.Pn Des.Mn e/h
139.92 -663.51 98.43 11.41 0.04139
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1352.88 147.00 108.7
M0 P-tens. Des.Pn Des.Mn e/h
77.93 -663.51 98.43 77.66 0.28178
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2435.40 163.91 1217.70 260.00
P0 |* 2232.45 189.92 1014.75 255.79
| * 2029.50 213.05 811.80 246.00
Pn,max|__* 1826.55 233.03 608.85 228.10
| * 1623.60 249.98 405.90 206.70
Pn | * 1420.65 260.57 202.95 178.12
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2435.40 93.48 1217.70 146.39
COMPRESSION| * 2232.45 107.87 1014.75 143.67
Pb|-------*Mb 2029.50 120.24 811.80 138.70
| * 1826.55 130.39 608.85 128.43
___________|____*_______ 1623.60 138.30 405.90 115.65
| * M0 Mn, 1420.65 144.98 202.95 98.22
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 34 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3342.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 2.513 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1513.81 310.80 205.3

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 117 of 131


Thursday, May 30, 2024, 01:40 AM

M0 P-tens. Des.Pn Des.Mn e/h


212.54 -1036.73 342.15 14.95 0.01560
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1360.92 171.71 126.2
M0 P-tens. Des.Pn Des.Mn e/h
114.56 -1036.73 342.15 127.10 0.13267
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2693.12 181.49 1346.56 311.94
P0 |* 2468.70 211.64 1122.13 310.24
| * 2244.27 239.46 897.71 305.77
Pn,max|__* 2019.84 264.43 673.28 291.91
| * 1795.42 287.22 448.85 271.31
Pn | * 1570.99 306.21 224.43 248.36
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2693.12 101.53 1346.56 171.70
COMPRESSION| * 2468.70 117.83 1122.13 170.41
Pb|-------*Mb 2244.27 132.35 897.71 167.42
| * 2019.84 144.91 673.28 160.74
___________|____*_______ 1795.42 154.92 448.85 149.29
| * M0 Mn, 1570.99 163.92 224.43 134.40
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 35 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2172.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 16 MM 1.609 58 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1482.40 259.89 175.3
M0 P-tens. Des.Pn Des.Mn e/h
139.92 -663.51 125.00 27.65 0.07901
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 118 of 131


Thursday, May 30, 2024, 01:40 AM

3297.94 2638.35 1352.88 147.00 108.7


M0 P-tens. Des.Pn Des.Mn e/h
77.93 -663.51 125.00 74.89 0.21397
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2435.40 163.91 1217.70 260.00
P0 |* 2232.45 189.92 1014.75 255.79
| * 2029.50 213.05 811.80 246.00
Pn,max|__* 1826.55 233.03 608.85 228.10
| * 1623.60 249.98 405.90 206.70
Pn | * 1420.65 260.57 202.95 178.12
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2435.40 93.48 1217.70 146.39
COMPRESSION| * 2232.45 107.87 1014.75 143.67
Pb|-------*Mb 2029.50 120.24 811.80 138.70
| * 1826.55 130.39 608.85 128.43
___________|____*_______ 1623.60 138.30 405.90 115.65
| * M0 Mn, 1420.65 144.98 202.95 98.22
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 36 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 3225.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 20 MM 2.513 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1513.81 310.80 205.3
M0 P-tens. Des.Pn Des.Mn e/h
212.54 -1036.73 344.17 17.81 0.01848
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3646.94 2917.55 1360.92 171.71 126.2
M0 P-tens. Des.Pn Des.Mn e/h
114.56 -1036.73 344.17 123.55 0.12821
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2693.12 181.49 1346.56 311.94
P0 |* 2468.70 211.64 1122.13 310.24

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 119 of 131


Thursday, May 30, 2024, 01:40 AM

Pn,max|__* 2019.84 264.43 673.28 291.91


| * 1795.42 287.22 448.85 271.31
Pn | * 1570.99 306.21 224.43 248.36
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2693.12 101.53 1346.56 171.70
COMPRESSION| * 2468.70 117.83 1122.13 170.41
Pb|-------*Mb 2244.27 132.35 897.71 167.42
| * 2019.84 144.91 673.28 160.74
___________|____*_______ 1795.42 154.92 448.85 149.29
| * M0 Mn, 1570.99 163.92 224.43 134.40
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 37 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2055.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 16 MM 1.609 53 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1482.40 259.89 175.3
M0 P-tens. Des.Pn Des.Mn e/h
139.92 -663.51 473.95 34.56 0.02604
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1352.88 147.00 108.7
M0 P-tens. Des.Pn Des.Mn e/h
77.93 -663.51 473.95 99.12 0.07469
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2435.40 163.91 1217.70 260.00
P0 |* 2232.45 189.92 1014.75 255.79
| * 2029.50 213.05 811.80 246.00
Pn,max|__* 1826.55 233.03 608.85 228.10
| * 1623.60 249.98 405.90 206.70
Pn | * 1420.65 260.57 202.95 178.12
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2435.40 93.48 1217.70 146.39
COMPRESSION| * 2232.45 107.87 1014.75 143.67
Pb|-------*Mb 2029.50 120.24 811.80 138.70
| * 1826.55 130.39 608.85 128.43

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 120 of 131


Thursday, May 30, 2024, 01:40 AM

___________|____*_______ 1623.60 138.30 405.90 115.65


| * M0 Mn, 1420.65 144.98 202.95 98.22
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 53 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 16 MM 1.072 44 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1439.36 231.70 161.0
M0 P-tens. Des.Pn Des.Mn e/h
95.51 -442.34 225.77 28.26 0.04470
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1324.66 133.10 100.5
M0 P-tens. Des.Pn Des.Mn e/h
54.78 -442.34 225.77 14.55 0.02301
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2282.68 154.56 1141.34 229.05
P0 |* 2092.46 177.83 951.12 221.23
| * 1902.23 197.27 760.89 210.10
Pn,max|__* 1712.01 213.36 570.67 193.13
| * 1521.79 226.66 380.45 166.78
Pn | * 1331.56 232.14 190.22 133.23
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2282.68 89.29 1141.34 131.27
COMPRESSION| * 2092.46 101.97 951.12 126.57
Pb|-------*Mb 1902.23 112.55 760.89 119.90
| * 1712.01 121.01 570.67 109.72
___________|____*_______ 1521.79 127.69 380.45 93.42
| * M0 Mn, 1331.56 132.94 190.22 74.80
| * BENDING
P-tens|* MOMENT
|

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 121 of 131


Thursday, May 30, 2024, 01:40 AM

ACI 318-11 COLUMN NO. 54 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 16 MM 1.072 44 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1439.36 231.70 161.0
M0 P-tens. Des.Pn Des.Mn e/h
95.51 -442.34 233.46 25.19 0.03853
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1324.66 133.10 100.5
M0 P-tens. Des.Pn Des.Mn e/h
54.78 -442.34 233.46 16.18 0.02475
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2282.68 154.56 1141.34 229.05
P0 |* 2092.46 177.83 951.12 221.23
| * 1902.23 197.27 760.89 210.10
Pn,max|__* 1712.01 213.36 570.67 193.13
| * 1521.79 226.66 380.45 166.78
Pn | * 1331.56 232.14 190.22 133.23
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2282.68 89.29 1141.34 131.27
COMPRESSION| * 2092.46 101.97 951.12 126.57
Pb|-------*Mb 1902.23 112.55 760.89 119.90
| * 1712.01 121.01 570.67 109.72
___________|____*_______ 1521.79 127.69 380.45 93.42
| * M0 Mn, 1331.56 132.94 190.22 74.80
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 55 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 1938.0 SQ. MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 122 of 131


Thursday, May 30, 2024, 01:40 AM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 25 MM 1.309 82 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1379.10 270.21 195.9
M0 P-tens. Des.Pn Des.Mn e/h
113.95 -539.96 95.47 8.55 0.03200
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1269.87 151.20 119.1
M0 P-tens. Des.Pn Des.Mn e/h
64.16 -539.96 95.47 69.61 0.26040
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2350.09 163.45 1175.04 268.53
P0 |* 2154.25 190.42 979.20 259.60
| * 1958.41 214.56 783.36 243.51
Pn,max|__* 1762.56 235.61 587.52 220.26
| * 1566.72 254.18 391.68 189.50
Pn | * 1370.88 270.29 195.84 152.51
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2350.09 92.25 1175.04 150.15
COMPRESSION| * 2154.25 107.52 979.20 144.79
Pb|-------*Mb 1958.41 119.80 783.36 135.14
| * 1762.56 130.54 587.52 120.42
___________|____*_______ 1566.72 139.65 391.68 102.91
| * M0 Mn, 1370.88 147.51 195.84 83.97
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 56 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 1587.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 16 MM 1.072 55 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 123 of 131


Thursday, May 30, 2024, 01:40 AM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1439.36 231.70 161.0
M0 P-tens. Des.Pn Des.Mn e/h
95.51 -442.34 92.33 89.06 0.34450
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1324.66 133.10 100.5
M0 P-tens. Des.Pn Des.Mn e/h
54.78 -442.34 92.33 17.25 0.06671
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2282.68 154.56 1141.34 229.05
P0 |* 2092.46 177.83 951.12 221.23
| * 1902.23 197.27 760.89 210.10
Pn,max|__* 1712.01 213.36 570.67 193.13
| * 1521.79 226.66 380.45 166.78
Pn | * 1331.56 232.14 190.22 133.23
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2282.68 89.29 1141.34 131.27
COMPRESSION| * 2092.46 101.97 951.12 126.57
Pb|-------*Mb 1902.23 112.55 760.89 119.90
| * 1712.01 121.01 570.67 109.72
___________|____*_______ 1521.79 127.69 380.45 93.42
| * M0 Mn, 1331.56 132.94 190.22 74.80
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 57 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 1821.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 25 MM 1.309 57 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1379.10 270.21 195.9
M0 P-tens. Des.Pn Des.Mn e/h
113.95 -539.96 217.19 9.74 0.01601
--------------------------------------------------------

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 124 of 131


Thursday, May 30, 2024, 01:40 AM

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1269.87 151.20 119.1
M0 P-tens. Des.Pn Des.Mn e/h
64.16 -539.96 217.19 78.33 0.12880
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2350.09 163.45 1175.04 268.53
P0 |* 2154.25 190.42 979.20 259.60
| * 1958.41 214.56 783.36 243.51
Pn,max|__* 1762.56 235.61 587.52 220.26
| * 1566.72 254.18 391.68 189.50
Pn | * 1370.88 270.29 195.84 152.51
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2350.09 92.25 1175.04 150.15
COMPRESSION| * 2154.25 107.52 979.20 144.79
Pb|-------*Mb 1958.41 119.80 783.36 135.14
| * 1762.56 130.54 587.52 120.42
___________|____*_______ 1566.72 139.65 391.68 102.91
| * M0 Mn, 1370.88 147.51 195.84 83.97
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 58 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 1587.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 16 MM 1.072 56 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1439.36 231.70 161.0
M0 P-tens. Des.Pn Des.Mn e/h
95.51 -442.34 99.13 89.43 0.32218
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1324.66 133.10 100.5
M0 P-tens. Des.Pn Des.Mn e/h
54.78 -442.34 99.13 17.81 0.06416

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 125 of 131


Thursday, May 30, 2024, 01:40 AM

--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2282.68 154.56 1141.34 229.05
P0 |* 2092.46 177.83 951.12 221.23
| * 1902.23 197.27 760.89 210.10
Pn,max|__* 1712.01 213.36 570.67 193.13
| * 1521.79 226.66 380.45 166.78
Pn | * 1331.56 232.14 190.22 133.23
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2282.68 89.29 1141.34 131.27
COMPRESSION| * 2092.46 101.97 951.12 126.57
Pb|-------*Mb 1902.23 112.55 760.89 119.90
| * 1712.01 121.01 570.67 109.72
___________|____*_______ 1521.79 127.69 380.45 93.42
| * M0 Mn, 1331.56 132.94 190.22 74.80
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 73 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2172.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 16 MM 1.609 61 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1482.40 259.89 175.3
M0 P-tens. Des.Pn Des.Mn e/h
139.92 -663.51 147.19 126.06 0.30587
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1352.88 147.00 108.7
M0 P-tens. Des.Pn Des.Mn e/h
77.93 -663.51 147.19 22.95 0.05567
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2435.40 163.91 1217.70 260.00
P0 |* 2232.45 189.92 1014.75 255.79
| * 2029.50 213.05 811.80 246.00
Pn,max|__* 1826.55 233.03 608.85 228.10
| * 1623.60 249.98 405.90 206.70

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 126 of 131


Thursday, May 30, 2024, 01:40 AM

NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2435.40 93.48 1217.70 146.39
COMPRESSION| * 2232.45 107.87 1014.75 143.67
Pb|-------*Mb 2029.50 120.24 811.80 138.70
| * 1826.55 130.39 608.85 128.43
___________|____*_______ 1623.60 138.30 405.90 115.65
| * M0 Mn, 1420.65 144.98 202.95 98.22
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 74 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 2172.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

12 - 16 MM 1.609 59 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1482.40 259.89 175.3
M0 P-tens. Des.Pn Des.Mn e/h
139.92 -663.51 152.13 116.21 0.27282
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3297.94 2638.35 1352.88 147.00 108.7
M0 P-tens. Des.Pn Des.Mn e/h
77.93 -663.51 152.13 29.62 0.06954
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2435.40 163.91 1217.70 260.00
P0 |* 2232.45 189.92 1014.75 255.79
| * 2029.50 213.05 811.80 246.00
Pn,max|__* 1826.55 233.03 608.85 228.10
| * 1623.60 249.98 405.90 206.70
Pn | * 1420.65 260.57 202.95 178.12
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2435.40 93.48 1217.70 146.39
COMPRESSION| * 2232.45 107.87 1014.75 143.67
Pb|-------*Mb 2029.50 120.24 811.80 138.70
| * 1826.55 130.39 608.85 128.43
___________|____*_______ 1623.60 138.30 405.90 115.65
| * M0 Mn, 1420.65 144.98 202.95 98.22
| * BENDING

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 127 of 131


Thursday, May 30, 2024, 01:40 AM

P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 75 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

8 - 16 MM 1.072 44 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1439.36 231.70 161.0
M0 P-tens. Des.Pn Des.Mn e/h
95.51 -442.34 159.72 46.12 0.10311
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1324.66 133.10 100.5
M0 P-tens. Des.Pn Des.Mn e/h
54.78 -442.34 159.72 1.88 0.00421
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2282.68 154.56 1141.34 229.05
P0 |* 2092.46 177.83 951.12 221.23
| * 1902.23 197.27 760.89 210.10
Pn,max|__* 1712.01 213.36 570.67 193.13
| * 1521.79 226.66 380.45 166.78
Pn | * 1331.56 232.14 190.22 133.23
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2282.68 89.29 1141.34 131.27
COMPRESSION| * 2092.46 101.97 951.12 126.57
Pb|-------*Mb 1902.23 112.55 760.89 119.90
| * 1712.01 121.01 570.67 109.72
___________|____*_______ 1521.79 127.69 380.45 93.42
| * M0 Mn, 1331.56 132.94 190.22 74.80
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 76 DESIGN RESULTS


===============================================

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 128 of 131


Thursday, May 30, 2024, 01:40 AM

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 1821.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 25 MM 1.309 61 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1379.10 270.21 195.9
M0 P-tens. Des.Pn Des.Mn e/h
113.95 -539.96 154.17 112.43 0.26045
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1269.87 151.20 119.1
M0 P-tens. Des.Pn Des.Mn e/h
64.16 -539.96 154.17 20.12 0.04660
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2350.09 163.45 1175.04 268.53
P0 |* 2154.25 190.42 979.20 259.60
| * 1958.41 214.56 783.36 243.51
Pn,max|__* 1762.56 235.61 587.52 220.26
| * 1566.72 254.18 391.68 189.50
Pn | * 1370.88 270.29 195.84 152.51
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2350.09 92.25 1175.04 150.15
COMPRESSION| * 2154.25 107.52 979.20 144.79
Pb|-------*Mb 1958.41 119.80 783.36 135.14
| * 1762.56 130.54 587.52 120.42
___________|____*_______ 1566.72 139.65 391.68 102.91
| * M0 Mn, 1370.88 147.51 195.84 83.97
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 77 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


ONLY MINIMUM STEEL IS REQUIRED.
AREA OF STEEL REQUIRED = 1500.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 129 of 131


Thursday, May 30, 2024, 01:40 AM

8 - 16 MM 1.072 44 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1439.36 231.70 161.0
M0 P-tens. Des.Pn Des.Mn e/h
95.51 -442.34 166.25 46.98 0.10094
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3091.13 2472.90 1324.66 133.10 100.5
M0 P-tens. Des.Pn Des.Mn e/h
54.78 -442.34 166.25 4.98 0.01071
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2282.68 154.56 1141.34 229.05
P0 |* 2092.46 177.83 951.12 221.23
| * 1902.23 197.27 760.89 210.10
Pn,max|__* 1712.01 213.36 570.67 193.13
| * 1521.79 226.66 380.45 166.78
Pn | * 1331.56 232.14 190.22 133.23
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2282.68 89.29 1141.34 131.27
COMPRESSION| * 2092.46 101.97 951.12 126.57
Pb|-------*Mb 1902.23 112.55 760.89 119.90
| * 1712.01 121.01 570.67 109.72
___________|____*_______ 1521.79 127.69 380.45 93.42
| * M0 Mn, 1331.56 132.94 190.22 74.80
| * BENDING
P-tens|* MOMENT
|

ACI 318-11 COLUMN NO. 78 DESIGN RESULTS


===============================================

FY - 275.0 FC - 21.0 MPA, RECT SIZE - 300.0 X 500.0 MMS, TIED


AREA OF STEEL REQUIRED = 1938.0 SQ. MM

BAR CONFIGURATION REINF PCT. LOAD LOCATION PHI


----------------------------------------------------------

4 - 25 MM 1.309 63 END 0.650


(PROVIDE EQUAL NUMBER OF BARS ON EACH FACE)
TIE BAR NUMBER 10 SPACING 256.00 MM

COLUMN INTERACTION: MOMENT ABOUT Z -AXIS (KN-MET)

--------------------------------------------------------

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 130 of 131


Thursday, May 30, 2024, 01:40 AM

P0 Pn max P-bal. M-bal. e-bal. (MM)


3182.41 2545.93 1379.10 270.21 195.9
M0 P-tens. Des.Pn Des.Mn e/h
113.95 -539.96 157.70 70.81 0.16036
--------------------------------------------------------

COLUMN INTERACTION: MOMENT ABOUT Y -AXIS (KN-MET)

--------------------------------------------------------
P0 Pn max P-bal. M-bal. e-bal. (MM)
3182.41 2545.93 1269.87 151.20 119.1
M0 P-tens. Des.Pn Des.Mn e/h
64.16 -539.96 157.70 51.49 0.11661
--------------------------------------------------------
Pn Mn Pn Mn (@ Z )
| 2350.09 163.45 1175.04 268.53
P0 |* 2154.25 190.42 979.20 259.60
| * 1958.41 214.56 783.36 243.51
Pn,max|__* 1762.56 235.61 587.52 220.26
| * 1566.72 254.18 391.68 189.50
Pn | * 1370.88 270.29 195.84 152.51
NOMINAL| * Pn Mn Pn Mn (@ Y )
AXIAL| * 2350.09 92.25 1175.04 150.15
COMPRESSION| * 2154.25 107.52 979.20 144.79
Pb|-------*Mb 1958.41 119.80 783.36 135.14
| * 1762.56 130.54 587.52 120.42
___________|____*_______ 1566.72 139.65 391.68 102.91
| * M0 Mn, 1370.88 147.51 195.84 83.97
| * BENDING
P-tens|* MOMENT
|

********************END OF COLUMN DESIGN RESULTS********************

352. END CONCRETE DESIGN


353. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAY 30,2024 TIME= 1:39:26 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2015 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************

C:\Users\Acer\Desktop\Project May 29\Project Aug 13.anl Page 131 of 131

You might also like