Technical Data Sheet

TECHNICAL SPECIFICATIONS
Specified HGS & HGF (FR)
Characteristics Test Standard Units
Value Greenlam Values
Physical & Dimensional Properties
Nominal Thickness mm As claimed by supplier 1.2 1.5
Thickness tolerance EN 438-2-5 mm ± 0.15 1.10-1.25 1.40-1.55
Density EN ISO 1183-1 gms/cm3 1.35 Min 1.38 to 1.40 1.38 to 1.40
Length & Width tolerance EN 438-2-6 mm -Nil/ +10.0 -Nil/ +6.0 -Nil/ +6.0
Straightness of edges EN 438-2-7 mm/m ≤ 1.5 deviation ≤ 1.5 ≤ 1.5
Squareness of edges EN 438-2-8 mm/m ≤ 1.5 deviation ≤ 1.5 ≤ 1.5
Flatness EN 438-2-9 mm/m ≤ 60 deviation ≤ 50 ≤ 50
Dimensional Stability at High temperature
Longitudinal % ≤ 0.55 Max 0.30 0.28
EN 438-2-17
Transverse ≤ 1.05 Max ≤ 0.55 ≤ 0.55
Resistance to Boiling water EN 438-2-12 Rating 4 Min 4 4
Mechanical Properties
Resistance to Cracking EN 438-2-23 Rating 4 Min 4 4
Impact Resistance (Small Diameter Ball) EN 438-2-20 N 20 Min 25 25
Impact Resistance (Large Diameter Ball) EN 438-2-21 mm ≥ 800 1200 1200
Surface Properties
Surface Defects
- Spot defects mm2/m2 ≤1 Conforms Conforms
EN 438-2-4
- Linear defects mm/m2 ≤ 10 ≤ 10 ≤ 10
Resistance to surface wear (initial point) EN 438-2-10 No. of revolutions 150 Min Conforms Conforms
Resistance to Steam EN 438-2-14 Rating 4 Min 5 5
Dry heat resistance (160 Degree C) EN 438-2-16 Rating 4 Min 5 5
Scratch Resistant EN 438-2-25 N 2.0 Min 3 3
Stain Resistant
Group - 1 & 2 5 Min 5 5
EN 438-2-26 Rating
Group - 3 4 Min 5 5
Light fastness under artificial light, Grey Scale EN 438-2-27 Rating 4 to 5 4 to 5 4 to 5
Fire performance
Bs1 d0 for F & Bs1 d0 for F &
Reaction to Fire EN 13501-1 Rating Class
Cs1 d0 for S Cs1 d0 for S
Thermal Conductivity EN 12524 W/m °K - 0.24 0.24
Health and Environmental Characteristics
Food safe EN 13130-1 - - YES YES
Formaldehyde emission (release) EN 717-1/ UL 2818 Class - E 1 / 7.3 ppb E 1 / 7.3 ppb
Volatile Organic Compounds (VOC) Emission ISO 16000-9 Class - A A
Antiviral Efficacy & Activity
% Reduction in 2 hrs. No Requirement 90% (Min) 90% (Min)
ISO 21702-2019 % Reduction in 24 hrs. 95.0 (Min) 99.9% (Min.) 99.9% (Min.)
Activity after 24 hrs. 2.0 (Min.) Exceeds Exceeds
Antibacterial Efficacy & Activity
% Reduction in 24 hrs. 95 99.99 99.99
JIS 2801-2012
Activity after 24 hrs. 2.0 (Min) Exceeds Exceeds
Antifungal Efficacy
ASTM G-21-2015 Growth after 28 days Rating 1 Rating 0 (No Growth) Rating 0 (No Growth)
Above test results are applicable to all Greenlam laminates except metal or Bacteria Tested= 1. Pseudomonas Aeruginosa, 2. Enterococcus Faecalis, 3. Candida Albicans, 4. Pseudomonas Aeruginosa, 5. Escherichia Coli,
foil laminates 6. Klebsiella Pneumoniae, 7. MRSA (Methicillin Resistant Staphylococcus Aureus), 8. Salmonella Enterica
HGS = Horizontal General Purpose Standard Fungus Tested= 1.Aspergillus niger, 2. Penicillium funicolosum, 3. Gliocladium virens, 4. Chaetobium globosum 5. Aurobasidium pullulans
HGP = Horizontal General Purpose Post forming Grade Laminates featured in this catalogue are available in size 1220mm x 2440mm x 0.8mm unless otherwise stated.
HGF (FR) = Horizontal General Purpose FIRE RETARDANT Limited Warranty:
Greenlam Industries Limited (GREENLAM®) warrants to the original buyer that (GREENLAM®) HPL will be free of defects, under normal, proper and
CLASS: 1 = Surface Damage 2 = Severe appearance alteration 3 = Moderate intended usage.
Change 4 = Slight change visible from certain angle 5 = No Change Within acceptable manufacturing specifications, buyer’s remedy in a case of claims, as a result of defective HPL, shalll be limited to only the
Virus Tested= MS2 Bacteriophage repalcement of HPL by (GREENLAM®)

Greenlam provides FSC® Certified product (Certificate No. SCS-COC-003328), on request.