Scribd
Upload
9 views4 pages

Cal Pipe Staging

The document describes the design calculation for pipe staging. It provides general properties of the pipe including diameter, thickness, support spacing, and weight when empty and full. It then checks the pipe for bending and deflection, determining it is safe. Finally, it designs the staging, checking the plate thickness and deflection are adequate with stiffeners included.

Uploaded by

akshay kothiyal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views4 pages

Cal Pipe Staging

The document describes the design calculation for pipe staging. It provides general properties of the pipe including diameter, thickness, support spacing, and weight when empty and full. It then checks the pipe for bending and deflection, determining it is safe. Finally, it designs the staging, checking the plate thickness and deflection are adequate with stiffeners included.

Uploaded by

akshay kothiyal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

DESIGN CALCULATION FOR PIPE STAGING

1.1 General Properties :-


Dia of Pipe = 326 mm DE
Thickness = 7.2 mm e
Support c/c spacing = 2 m
Weight of Pipe = 77 kG/m Empty Condition
Weight of Pipe = 200 kG/m Full Condition

DESIGN BY:- AKSHAY KOTHIYAL


2.1 Check for bending

2 kN/m Unfactored

2m

2.2 Sectional Properties y

x x

Dia = 326 mm
Es = 170000 Mpa
Axx = 7207.4304 mm2
Ixx = 91611197.29 mm4
Iyy = 91611197.29 mm4
Zxx = 562031.8852 mm3
Zyy = 562031.8852 mm3
Ybar = 163 mm
Xbar = 163 mm

Wu = 3 kN/m
Mu = 1.5 kN-m
Zxx req = 6.6 cm3
Zxx prov = 562.0 cm3 Hence safe in Bending

DESIGN BY:- AKSHAY KOTHIYAL


2.3 Check for Deflection

δ 0.040131 mm < 20mm Hence safe in Deflection

3.0 Design of staging


3.1 FBD of staging

a 1.3

1.6 3 Kn

b c

Maximum Moment and shear will be at point b


Mu = 3.9 kN-m
Vu = 3 kN

Considering Extra loading of snow 1.5kN/m


Mu = 5.36 Kn-m
Vu = 5.925 kN

3.2 Check for thickness of plate

Zz req = 23.595 cm3


b = 250 mm
t = 23.80 mm
t provided = 25 mm Hence safe in Bending

3.2 Check for deflection of plate


Izz of plate = 325520.8 mm4

δ +

0.0397 + 9.677139 = 9.7 mm


Stiffener has been provided to reduce the span for deflection 750x750x12mm 5 No

DESIGN BY:- AKSHAY KOTHIYAL


Izz of plate = 325520.8 mm4
Leff = 0.925 m

0 +

0.0143 + 2.480507 = 2.5 mm

DESIGN BY:- AKSHAY KOTHIYAL

You might also like