Scribd
Upload
37 views

BASF ST 45 B - P3 Material Data Sheet (Technical)

This document provides information on the properties of an Ultracur3D® ST 45 B resin, including its viscosity, density, tensile strength, flexural properties, impact properties, thermal properties, dielectric properties, hardness, and biocompatibility. Metrics like tensile strength, flexural modulus, and hardness are provided alongside their testing norms. A disclaimer is also included.

Uploaded by

Nicolas Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views

BASF ST 45 B - P3 Material Data Sheet (Technical)

This document provides information on the properties of an Ultracur3D® ST 45 B resin, including its viscosity, density, tensile strength, flexural properties, impact properties, thermal properties, dielectric properties, hardness, and biocompatibility. Metrics like tensile strength, flexural modulus, and hardness are provided alongside their testing norms. A disclaimer is also included.

Uploaded by

Nicolas Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Ultracur3D® ST 45 B

General Properties Norm Typical Values


Apperance - Black
1
Viscosity, 30 °C Cone/Plate Rheometer 230 mPas
1
Viscosity, 50 °C Cone/Plate Rheometer 80 mPas
Density (printed part) ASTM D792 1.2 g/cm3
Density (liquid resin) ASTM D4052-18a 1.12 g/cm3

Tensile Properties Norm Typical Values


E Modulus ASTM D638 2000 MPa
Ultimate Tensile Strength ASTM D638 53 MPa
Elongation at Break ASTM D638 21 %

Flexural Properties Norm Typical Values


Flexural Modulus ASTM D790 2100 MPa
Flexural Strength ASTM D790 95 MPa

Impact Properties Norm Typical Values


Notched Izod (Machined), -30 °C ASTM D256 20 J/m
Notched Izod (Machined), 23 °C ASTM D256 20 J/m
Charpy notched, 23 °C ISO 179-1 2.6 kJ/m²

Thermal Properties Norm Typical Values


HDT at 0.45 MPa ASTM D648 63 °C
HDT at 1.82 MPa ASTM D648 52 °C
Flammability UL 94 1.5 mm HB

Dielectric/Electric Properties Norm Typical Values


Electrical strength DIN EN 60243-1 29 kV / mm

Hardness Norm Typical Values


Shore D ASTM D2240 80

Other Norm
Biocompatibility ISO 10993 Information available on request

____________________________________________________
1) Determined with TA-Instrument DHR rheometer, cone/plate, diameter 60 mm, shear rate 100 s -1

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing
and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply
any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data,
proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is
the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. The safety data
given in this publication is for information purposes only and does not constitute a legally binding MSDS. The relevant MSDS can be obtained upon
request from your supplier or you may contact BASF 3D Printing Solutions GmbH directly at [email protected]. Version 5.0

BASF 3D Printing Solutions GmbH [email protected] www.forward-am.com

You might also like