2-In-1 Wooden Highchair

Instruction Manual
6-36
months
15
kg
3-10
years
30kg

HIGHCHAIR MAXIMUM TODDLER MAXIMUM

WEIGHT CHAIR WEIGHT
HIGHCHAIR TODDLER
CHAIR

THE ILLUSTRATIONS SHOWN IN THIS MANUAL ARE FOR REFERENCE ONLY. THE MANUFACTURER
RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION OR FEATURE WITHOUT FURTHER NOTICE.
IMPORTANT! PLEASE READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.
 Safety Advice
Highchair Mode

WARNING!
IMPORTANT: RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
IMPORTANT! READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE.
Read these instructions carefully before assembly and use and
keep for future reference. The child may be hurt if you do not follow
these instructions. Adult assembly required.
Before using, remove and dispose of any plastic bags and other
packaging (e.g. fasteners, fixing ties, etc.) and keep them out of reach of
children.
WARNING! FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
WARNING! Do not leave the child unattended. Always keep child in view
while in the highchair.
WARNING! The product is intended for children able to sit up unaided and
up to 3 years or a maximum weight of 15 kg.
WARNING! Do not use the highchair until your child can sit up unaided
(approx. 6 months).
WARNING! Position the highchair away from solid structures and benches
to avoid injuries caused by falls and by access to dangerous items.
WARNING! Do not use the highchair unless all components are correctly
fitted and adjusted.
WARNING! Be aware of the risk of open fire and other sources of strong
heat, such as electric bar fires, gas fires etc. in the vicinity of the highchair.
WARNING! Do not use if any part is broken, torn or missing.
WARNING! Do not move or carry the highchair with your child inside.
WARNING! THE HARNESS MUST ALWAYS BE USED AND CORRECTLY
FITTED. MOST INJURIES FROM HIGHCHAIRS ARE CAUSED BY FALLS.
WARNING! Falling hazard: Prevent your child from climbing on the product.
WARNING! Be aware of the risk of tilting when your child can push its feet
against a table or any other structure.
Page 2
 Highchair Mode
• Assembly to be carried out by a competent adult only.
• During assembly children should be kept away from the product due to
possible risk of injury.
• Do not use this item if any components are missing or damaged.
• This product is suitable for children in the age range of children for which the
product is designed 6m – 10 years.
• Folding and unfolding this product should only be carried out under adult
supervision.
• Ensure that fingers and legs are clear of all adjustments when adjusting
this product.
• Regularly check all fastenings to ensure that they properly tightened.
• Use only on a level and stable surface.
• Ensure children are clear of all moving parts before making any adjustments.
• Do not use near stairs or steps.
• When not in use, store away from children.
• Use the highchair on a flat, even and horizontal floor and do not elevate the
highchair on any structure or table.
• To reduce the risk of injury, position the highchair away from furniture,
walls, hot surfaces and liquids, window covering cords and electrical cords.
• Position the highchair away from furniture when the chair is not being used
at a table with the tray removed.
• Do not use the highchair if any part is broken, torn or missing.
• Regularly check all connections and/or fittings to ensure they are tight.
• Do not use accessories or replacement parts other than those approved by
the manufacturer.
• Ensure all users are familiar with the products operation.
• Ensure your highchair is fully erected before placing your child inside.
• Do not allow your child to climb unassisted into, play with or hang onto the
highchair. This is not a toy.
• All additional hazards such as electrical flex should be kept out of the reach
of children in the highchair.
• Adult assembly is required.
• When using the highchair at a table, ensure your child cannot push against
the table or another surface as this could result in the chair tipping over.
Complies with EN 14988:2017+A1:2020; + AS4684 2009

Child Seat Mode

WARNING! Suitable for children able to sit up unaided from 36 months
(3 years) to approx. 10 years or 30kg.

Page 3
 Introduction
Features:
The highchair is perfect for growing children. It meets your child’s changing
needs year after year and the contemporary design makes it a great addition
to any kitchen or dining room.

The seat of the highchair adjusts through 4 heights as your child grows, while
the sturdy footrest adapts to 8 different positions to keep babies and toddlers
comfortable and supported.

The tray height is just right for most tables, positioned just above table
top-level to keep baby close at family mealtimes. It can be removed to help
make tidying up after baby easy.

The bumper bar and 5-point safety harness ensures baby stays safe and
secure in the seat. Once your child is approx. 3 years old, these can be
removed to make room for growing children.

Lower or remove the footrest as needed to make the Baby to Toddler

highchair the perfect seat for years to come.

Intended Use:
This product is for domestic use only and not for commercial or trade use.

This product can only be used indoors. Do not use outdoors.

Check whatDimensions:
Assembled you have received:
H: 90.5cm, W: 49cm, D: 46cm

Weight: 7.9kg

Page 4
Parts List
Check what you have received:
You have received 1 box. Please check the contents of the box against the
list below. If anything is missing, please contact Customer Service.

Supplied in box:

Page 5
Parts List
Assembly
Requirements:
Equipment: flat head screwdriver

1m x 1m of assembly space required

30 minutes assembly time approximately.

Check
Tips before
whatyou
youstart:
have received:
1. Please check that all parts are present before you start the assembly of
your furniture.
2. Assembly to be carried out by a competent adult only.
3. During assembly children should be kept away from the product due to
possible risk of injury.
4. For ease and speed of assembly, we recommend that before you
commence each step of the assembly, that you identify all the parts
required for that step.
5. For larger items, please ensure that you have sufficient space and people
to assemble your product safely.
6. We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
7. For the protection of your furniture, we recommend that the product is
placed on a protected surface during assembly to prevent any damage.
8. During assembly please take care not to over-tighten any fittings, as this
may damage the product.
9. Always place the product on a flat, steady and stable surface.
10. Do not stand on the product. Do not use the product as a step ladder.
11. This product is intended for indoor, household use only as it is a
non-industrial product.
12. Usage of power tools is not recommended for assembling this product.
13. Please use caution and care when lifting the product to avoid personal
injury and / or damage.

Page 6
Parts List
Assembly
Using Barrel Nuts:
When fitting barrel nut (P), ensure starting position is correct before you
insert connecting bolts.

barrel nut hole

bolt hole

Page 7
Assembly
Step 1
Insert upper seat backrest (D) into side frame (B) as shown.

Insert barrel nut (P) into the barrel P T

nut hole, ensuring that the starting
position is correct.
Use a flat head screwdriver to help
position the barrel nut (P) if required.
Insert connecting bolt (M) into P x1 M x1
the bolt hole and tighten
the barrel nut (P) with
allen key (T).
Note. DO NOT fully
tighten bolt.

Page 8
Step 2
Insert lower seat backrest (E) into side frame (B) as shown.

Insert barrel nut (P) into the barrel nut P x1 M x1

hole, ensuring that the starting position
is correct.
Use a flat head screwdriver to help
position the barrel nut (P) if required.
Insert connecting bolt (M) into
the bolt hole and tighten
the barrel nut (P) with
allen key (T).
Note. DO NOT fully
tighten bolt.

M
P

Page 9
Step 3
Insert one support bar (F) into side frame (B) as shown.
Assemble barrel nut and connecting bolt as shown
in Step 1 and 2

M
P

T F

P x1 M x1

Step 4
Insert second support bar (F) into side frame (B) as shown.
Assemble barrel nut and connecting bolt as shown
in Step 1 and 2

P x1 M x1

Page 10
Step 5
Insert final support bar (F) into side frame (B) as shown.
Assemble barrel nut and connecting bolt as shown
in Step 1 and 2

P P x1 M x1

T
F

Step 6
Insert bumper bar (C) into side frame (B) as shown. Insert barrel nut (P) into
the barrel nut hole, ensuring that the starting position is correct.
Insert connecting bolt (N) into the bolt hole and tighten the barrel nut (P) with
allen key (T).
Note. DO NOT fully
tighten bolt.

P x1 N x1 C

Page 11
Step 7
Attach side frame (A). Insert barrel nut (P) into the barrel nut holes, ensuring
that the starting position is correct.
Insert connecting bolts (M) into the bolt hole on the seat backrests and
support bars.
Tighten the barrel nut (P) with allen key (T).
Insert connecting bolt (N) into the bolt hole on the bumper bar and tighten
the barrel nut (P) with allen key (T).
Note. DO NOT fully tighten bolts.

P x6

N x1
T M

P
M x5

M M M N

Page 12
Step 8
Slide the smaller board (G) and large board (H) into position as shown.

Ensure the boards are level before continuing.

Page 13
Step 9
Once the boards are in position, fully tighten the bolts with allen key (T) on
both sides of the highchair frame.

Step 10
Screw the four feet stoppers (Q) into the bottom of the legs as shown.

Q x4

Page 14
Step 11
Assemble the tray holders (K) onto both sides of the frame. Position one tray
holder (K) and insert two bolts (O). Tighten with allen key (T). Repeat for the
other side.
Be careful not to assemble the tray holders upside down. The groove should
be at the bottom when assembled as shown.

K x2 O x4 T

T K

Page 15
Step 12
Attach harness (L) to the highchair. Rotate the harness retainers on the waist
straps and thread the harness through the allocated slots in the lower seat
backrest.

Rotate the harness retainer on the crotch strap and thread the harness
through the allocated slot in the seat board.

WARNING!
Ensure the harness
retainers are fully
through the slots
before continuing.

Page 16
Safety Harness
Lock
Push the side clips into the centre buckle. Listen for the “click”.

CLICK

Unlock
Push the side clips at points shown and remove from buckle.

PUSH

Adjust
Sliding adjusters are fitted and should be adjusted to suit your child.
WARNING! The child should be harnessed snugly and attended at all times.

Page 17
Highchair
Suitable from 6 to 36 months (15kg)

WARNING! The harness must always be used and correctly fitted. Most
injuries from highchairs are caused by falls.
WARNING! Never use the highchair without the bumper bar (part C) and
harness for a child aged 6 to 36 months (15kg).

Page 18
 Tray
Assemble the tray (I) to the highchair. Press in the spring pins and insert tray
into tray holders. Push tray into tray holders until you hear a “click”.
To remove, press in the spring pins and pull the tray out from the tray holders.

CLICK

Page 19
Seat Pads
Seat Pads come supplied in two sections for the seat board and the backrest.
Place the backrest seat pad (S) into position as shown. Wrap the straps around
the backrest and fasten the fastening grips at the back.

Place the seat board seat pad (R)

into position as shown.
Wrap the straps around
the seat board and fasten
the fastening grips underneath.
To remove, undo the
fastening grips.

Page 20
Height Adjustment
To adjust both board heights, loosen the bolts with allen key (T) on both sides
of the highchair frame.
There are 4 seat height positions and 8 footrest positions.
Adjust the boards to desired positions.

When boards are at desired position, re-tighten the bolts with allen key (T) on
both sides of the frame.
WARNING! Always ensure the seat height and footrest are at a comfortable
and suitable height for your child.

Page 21
Child Seat
Suitable from 3 years to 10 years (30kg)
Loosen the bolts with allen key (T) on both sides of the highchair frame.
To provide more seating space for your growing child, switch the board
positions.
Insert the large board (H) into your desired seat height position and insert
the smaller board (G) at your desired foot height position.

Note. the backrest seat pad (S)

can be used in Child Seat mode.
Attach to highchair as shown
in Seat Pads.
S

Page 22
Care
Cleaning
Pads and harness:
Wipe clean with damp cloth. Do not bleach. Do not tumble dry. Do not
iron. Do not dry clean.

Frame, tray and bumper bar:

Wipe clean metal, wood or plastic components with mild detergent and warm
water. Never use abrasive, ammonia based, bleach based or spirit type cleaners.
Ensure the product is fully dry before use or storage. Store product in a dry
location away from any heat sources and direct sunlight.

Maintenance
This product requires regular maintenance to keep it in good working order.
Regularly check all parts of the product to ensure that they are operating
correctly and for signs of wear or damage.
Before use, always check for any missing parts, torn material or if it is
broken or damaged. Replace parts as needed by contacting Customer
Service. NEVER USE if parts are missing or damaged.
Use only parts and accessories approved by the manufacturer.

Disposal
Electrical and electronic equipment should not be mixed with general
household waste.
For proper treatment, recovery and recycling, please take this product to
designated collection points. Please contact your local authority for further
details of your nearest designated collection point.
Disposing of this product correctly will help save valuable resources and
prevent any potential negative effects on human health and the environment,
which could otherwise arise from inappropriate waste handling.
The cardboard and paper packaging from this product can be recycled.

Page 23
 KEYCODE: 42967729

Made in China

FOR AU / NZ: IMPORTED FOR KMART

STORES IN AUSTRALIA AND NEW KMART CUSTOMER SERVICE
ZEALAND.
AU:1800 124 125 NZ:0800 945 995