WHITEPAPER

5 Common Causes
of Refractory Failure
and How to Fix Them
Author

Johannes Poth
Fired Heater Efficiency Subject
Matter Expert

Johannes Poth is a fired heater efficiency expert at Integrated Global Services (IGS).
Johannes earned an engineering degree in ceramics from the University of Applied
Science in Koblenz, Germany. He then joined Fosbel as a Quality and Product Manager,
specializing in fired heater efficiency. Over the years, he has been responsible for the
development and market introduction of IGS fired heater services, including Cetek
ceramic coatings and Hot-tek’s refractory repair service. Mr. Poth has been with Cetek
since the late 1990’s and continues to support fired heater efficiency optimization
projects in Europe and around the globe.
 White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

Contents
Introduction ..................................................................................................... 4

5 Common Causes of Refractory Failure ................................................. 5

1. Deterioration Due to Length of Service ....................................... 5

2. Incompatible Refractory Materials ............................................... 5

3. Loss of Support .................................................................................... 6

4. Mechanical Stress ............................................................................... 6

5. Poor Installation or Maintenance .................................................. 7

How to Inspect Furnaces for Damage ....................................................... 8

Methods to Repair Refractory ..................................................................... 9

Case Study: Fired Heater Shutdown ......................................................... 10

Prevented with Hot Refractory Repair

Conclusion ........................................................................................................ 14

3
 Integrated
Integrated Global Services
Global Services

Introduction

All process heaters operate at high temperatures and are constructed with process tubes
inside a refractory-lined enclosure, which is heated by radiant heat from gas-firing or, less
commonly, oil-firing.

Refractory linings are insulating and minimize heat loss, making them essential to retaining the
high-temperature environment. However, when subjected to high temperatures, refractory
can deteriorate and potentially lead to failure if remedial work is not carried out.

Types of refractory lining include refractory ceramic fiber, brick, and castable or concrete.
If refractory failure results in an unplanned shutdown, it can cost plants more than $1m/day
in lost production.

In this whitepaper, we will discuss the most common causes of refractory failure, how to
inspect fired heaters or furnaces for damage, and the methods of repairing refractories online
without the need to disrupt normal operation.

4
 White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

5 Common Causes of Refractory Failure

1. Deterioration Due to Length of Service

As refractory linings age, their physical properties change. The high-temperature environment
causes microstructural changes to the binders within the materials, leading to a loss of surface
or internal strength. If the refractory material carries a compressive load, such as bricks, or
castable linings, this can lead to local, or widespread failure.

If the refractory is subject to flame impingement, which is common in many radiant wall
applications, the useful life will be shorter.

In oil-fired heaters, refractory deterioration is accelerated by corrosive agents in the

combustion products. Fortunately, there are few cases where oil-firing is used now.

2. Incompatible Refractory Materials

A combination of refractory materials is a common feature in fired heaters. Openings such

as doors often use fiber and brick material, and peep sights may use IFB, castable, or fiber
modules.

A standardized design using different materials can be challenging as each material has varying
properties at high temperatures. Therefore, refractory linings can become damaged, leaving
the shell exposed to hot flue gases and causing hot spots.

To lower the risk of mismatched refractory materials, it is a good idea to work closely with the
refractory supplier to ensure comparable materials are used around openings.

5
 Integrated Global Services

3. Loss of Support

All types of refractory linings are attached to and supported by the external steel shell of the fired
heater. The conventional support is provided by an anchoring system, which is welded to the shell.

Frequently, the welded joint between the shell and the anchor is compromised by corrosion and
support is lost. The corrosion is caused by hot flue gases penetrating through the refractory lining
and condensing upon reaching the cooler shell. The local environment is ideal for rapid oxidation,
or corrosion of the weakest point; the weld.

Once support is lost, individual bricks, modules, etc. can fall away, leaving the metal shell exposed,
which creates a domino effect and the failure of adjacent refractory lining.

At a plant in Europe, a hot spot was discovered on the transition shell ducting between the radiant
and convection sections of a CCR Platformer. In this case, the failure of the ceramic fiber blanket in
the roof left the shell exposed to hot flue gas. This caused the external shell temperature to exceed
560°C/ 1040°F.

To prevent overheating the shell until failure, the production rate on the CCR Platformer had to
be decreased, resulting in a loss of production of more than $400,000 per day. The plant used Hot-
tek’s hot refractory repair service to fix the issue until the next planned turnaround. This service is
discussed in more detail later in this whitepaper.

4. Mechanical Stress

There are several factors that can cause mechanical stress to lead to refractory failure.
This includes:

• Vibrations - Vibration or interference from other equipment can cause refractory

to become displaced and break down over time.

• Thermal expansion/ spalling - This occurs when refractory linings expand and
contract at different rates due to thermal conditions. This often leads to cracking
and spalling which can cause failure if not repaired.

• Impact - Mechanical impact from falling objects/components can also damage refractory.

6
 White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

5. Poor Installation or Maintenance

Improper installation or maintenance is a common cause of refractory failure. Factors such

as installation techniques, curing time, inadequate support, or poor-quality materials can all
weaken the refractory and contribute to its failure.

Refractory installation begins at the manufacturing stage. Good communication between the
manufacturer and the plant is critical to ensure that the refractory is fit for purpose. It should
be resistant to thermal stresses and other processes caused by the operating environment.
Parameters such as temperatures, start-ups and shutdowns, flue gas temperature and
chemical components, and required heat loss should all be evaluated.

Once manufactured, the refractory should be stored in a dry, well-ventilated space and
installed within three months for high-temperature or high-abrasion operating environments.
If installed and maintained correctly, refractory linings should last 20 years or more.

However, several characteristics could suggest issues at the installation stage. For example, if
you notice fiber modules have fallen from the roof or gaps have appeared, it could be due to an
issue such as insufficient stud welding. It could also be a sign of shell corrosion, which is more
common if a protective alloy cladding, such as IGS’ High Velocity Thermal Spray (HVTS) has
not been applied to the shell before installation.

Whilst there is a range of potential installation issues that can lead to refractory failure, regular
and diligent inspections can help to identify damage early to allow remedial work to be carried
out.

7
 Integrated Global Services to Repair Refractory

How to Inspect Furnaces for Damage

Often the first sign of refractory failure is a hot spot on the external steel shell since direct observation
of the problem area is not possible. IGS has designed and developed Cetek’s Lancescope™ fired
heater inspection tool. It allows the undertaking of a high-temperature furnace inspection to
determine the scope of the problem, often avoiding an expensive shutdown of the heater.

The hot inspection system uses a state-of-the-art digital camera system, which provides clear,
detailed images of problem areas up to 3000°F (1650°C). The furnace inspection system can be
inserted into openings as small as 2.75” (7cm) and reach up to 30ft (10m). In applications below
1000°F (540°C), the heater inspection system provides illumination via a high-temperature light
source for optimum clarity.

The benefit of performing a hot inspection includes:

• Performed while the unit is in operation

• Provides insight into production availability
• Identifies damage in early stages
• Reduces maintenance costs
• Minimizes repair downtime
• Maximizes production

8
 White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

Methods to Repair Refractory

Once the damage has been identified, there are usually options to fix the issue. Production
can be interrupted to take the asset offline and carry out conventional repairs, or the furnace
can continue to run at reduced performance until the next planned turnaround. However, this
could exacerbate any existing damage.

Alternatively, an online refractory repair service is offered by Hot-tek™, where there is no

need to bring the heater off-line and production will not be interrupted or capacity limited.
This is a good option to temporarily fix damage until the next planned turnaround.

A team of refractory technicians can be mobilized at short notice and the repair involves
creating minimal access point openings to insert specially designed components and repair
material, delivering a semi-permanent repair lasting at least until the next turnaround.

9
 Integrated Global Services

Case Study:
Fired Heater Shutdown Prevented
with Hot Refractory Repair

A refinery in the U.S. discovered serious refractory integrity concerns on its catalytic reformer
(CCR) heater unit. The refractory ceramic fiber was missing in a furnace. As a result, the outer
steel shell was damaged due to exposure to high temperatures in multiple areas of the roof
and sidewall.

10
 White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

Refinery Furnace Infrared Images Reveal Problem Areas

This refinery is a downstream energy company with assets in petroleum refining, logistics,
convenience stores, asphalt, and renewables with a capacity of fewer than 150,000 barrels
per day. The refinery produces types of gasoline, distillates, and propane products.

The plant invited Hot-Tek to inspect the unit and carry out hot refractory repairs. The team took
infrared images of the hot spots on the CCR fired heater roof during the pre-project meeting.

Temperatures of more than 1500°F/815°C were being reached at the bridge wall, relatively
high for a CCR fired heater. Material selection utilized in the previous repairs was not sufficient
for these elevated bridge wall temperatures.

Hot-Tek #1 & #2 Repair Area.

Repaired using Hot-Tek Module
Style on the ceiling of the
installed dog boxes.

Hot-Tek #3 Repair Area.

Repair performed utilizing the
Hot-Tek Basket Style Repair on
the existing ceiling.

Hot-Tek #4 Repair Area.

Repair performed utilizing
Hot Tek Basket Style Repair on
the side of the Dog Box and
existing ceiling.

11
 Integrated Global Services

Hot-Tek Hot Refractory Repair Solution

The damaged areas were repaired using two techniques; Hot-Tek’s unique basket-style repair
and the larger module repair. The larger damaged furnace roof areas were cut into sections and
removed one at a time. Then, prefabricated modules consisting of higher alloy plates and hardware
along with high-temperature ceramic fiber created a long-term repair solution for the refinery. The
basket-style repair method was used to seal around the perimeter of the modules.

Step-by-Step Hot-Tek Repair Solution

Hot-Tek furnace repair using the module style on the ceiling of the installed dog boxes:

Cutting theTiles and Leaving an Area for Support

The first tile was cut using a plasma cutter and removed

1 from the furnace ceiling. Approximately 1”-2” area of the

original furnace shell was left for support for the new
Hot-Tek Module. After installing the module temporarily,
the team then moved to the next tile.

Installing Prefabricated Hot-Tek Module

2 The team installed a prefabricated Hot-Tek module and

tack-welded it into the place.

Large Module Installed in Another Section

The installation of the large module was completed in
3 the next roof section. The module and technician were
tethered for safety.

12
 White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

Module Fitted and Welded in Place

4 The module was fitted and fully welded in place with an

alloy rod for dissimilar metal welding.

Hot-Tek Basket Solution

The large, damaged roof area was repaired with 16” square

5 alloy Hot-Tek baskets. The baskets were welded together

to form the new “ceiling” of the roof.

Pouring New Refractory

Pourable/pumpable refractory was laid into the large

6 opening. After curing, the surface becomes cool to the

touch. Once cool, an alloy plate was welded over
the refractory.

The Result – Hot-Tek Hot Refractory Repair Solution

The Hot-Tek project was completed within the agreed schedule of eight days. The refinery
continued operations at full capacity, completely unaffected by the repairs taking place. A
shutdown would have cost the refinery millions in lost production.

13
 Integrated Global Services

Conclusion

There are numerous causes of refractory failure, but shutting down the furnace should always
be a last resort as this has a huge impact on production and revenue. The operating environment
is responsible for most refractory failures and a common oversight is to increase the furnace
temperature without assessing the impact that this will have on the design parameters of
the refractory. Planning for over-capacity can help to mitigate the risk of refractory failure if
specifications change after installation.

Understanding and preventing refractory damage is key to the overall furnace performance. IGS
recognizes the effects of asset failure and works in partnership with plants worldwide to optimize
equipment reliability and performance. Identifying refractory damage early and understanding the
reasons behind it will help operators increase furnace up-time and maximize overall performance
which could save millions in otherwise lost revenue.

If unexpected performance losses are impacting your operations, IGS can mobilize quickly to help
you identify, fix, and prevent future damage.

+ Watch Case Study Webinar On-Demand

+ Read More Case Studies

14
White Paper - 5 Common Causes of Refractory Failure and How to Fix Them

15
Contact Info
+1 888 506 2669
+420 735 750 500
[email protected]
integratedglobal.com