Scribd
Upload
19 views

EN Key Tech Dat

Uploaded by

Alexandru Olaru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views

EN Key Tech Dat

Uploaded by

Alexandru Olaru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BESISTA® Key Technical Data

ETA-08/0038 DIBt Berlin 0672-CPD-0091 MPA Stuttgart BESISTA® tension rod systems
BESISTA® Betschart-Sicherheits-Stabsysteme (Betschart safety rod systems) are designer products
with hot-dip galvanized rod threads. More comprehensive details, all drawings, the approval and type
stress analysis are available at www.besista.com or can be requested at [email protected].

Limit tensile forces NR,d in kN for BESISTA® 540 (for limit compressive forces see „Navi“ - „Design loads“)
Material combination 1 made of S540N, an extra-high-quality modified S460N with a guaranteed yield strength of
®
540 N/mm², is BESISTA standard and must be exclusively supplied by BESISTA International GmbH. Material combina-
tions 4 and 5 contain the limit tensile forces of lower-strength tension rods, gusset plates and circular discs made of
standard steel grades, for cases where customers produce the tension rods themselves and purchase only the ETA-
®
approved rod anchors from BESISTA . The installation instructions must be adhered to in all cases.
Material combinations M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 M72 M76
Standard
1 Tens. rods S540N (Re 540) 19 31 43.7 59.6 81.4 100 127 157 183 238 291 360 424 506 581 677 764 911 1053 1225 1387 1584 1796 2016
Plates S355
Tens. rods S540N (Re 540)
2 Plates GJS-400-15
16.4 27.3 40.9 57.3 81.4 92 123 135 164 203 256 338 368 465 501 614 655 798 955 1125 1200 1391 1596 1814
Tens. rods S540N (Re 540)
3 Plates S235
15.4 25.6 38.5 53.8 76.9 86.5 110 121 148 182 230 304 331 419 451 552 589 686 821 968 1032 1197 1372 1560
Tens. rods S355 (Re 355)
4 Plates S235
12.4 19.6 28.5 38.9 53.1 65.3 82.9 102 120 155 190 235 277 330 379 442 499 595 687 799 906 1034 1172 1317
Tens. rods S235 (Re 235)
5 Plates S235
9.5 15 21.9 29.8 40.7 50 63.5 77.8 91.5 117 145 175 208 244 271 311 354 415 481 553 629 710 796 887

Example with cover sleeve Example without cover sleeve


Rod anchor (fork head)
Tension rod

Suspension ring for solid rod

min. 40° Extension sleeve


for any length beyond 15 m
min. 50°
Cross anchor Suspension ring for coupler
Tensioning sleeve
for controlled tensioning

Circular disc

Machined compression Compression rod con- Compression rod connection


rod connection nection one-part for tube two-part (tube)
(solid rod) or timber with higher-strength threaded bolts

Dimensions in mm for BESISTA® 540


Thread sizes M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 M72 M76
Tension rods Ød 8 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72 76
Ø d1 Z 8 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72 76
Ø d1 D 1) 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72 76 80
Rod anchors
V2) 14 16 18 20 22 26 28 30 36 40 44 46 50 54 58 64 70 74 80 84 92 96 100 108
L6 3) 23 28 32 37 42 46 51 57 63 71 78 83 92 98 107 114 125 137 146 155 167 177 185 195
w2 (t) 6 8 10 12 15 15 18 18 20 22 25 30 30 35 35 40 40 45 50 55 55 60 65 70
c2 min 28 35 41 47 52 57 62 70 75 85 93 99 112 117 130 136 153 167 175 187 203 214 224 244
Gusset plates Ø d2 Z 8,5 11 13 15 17 19 21 23 25 28 31 34 37 40 43 46 50 54 58 62 66 70 74 78
Ø d2 D 10,5 13 15 17 19 21 23 25 28 31 34 37 40 43 46 49 54 58 62 66 70 74 78 82
L5 4) 16 20 23 27 31 34 37 42 45 51 56 60 67 71 78 82 91 100 106 113 122 129 135 141
Ø Da 96 118 140 162 184 204 224 248 268 302 334 364 400 430 466 496 534 582 626 668 718 764 800 848
Circular discs Ø Di 30 36 42 48 54 60 66 72 78 88 98 108 118 128 138 148 158 170 184 196 210 226 234 248
Ø Sm 64 78 94 108 122 136 150 164 178 200 222 244 266 288 310 332 354 382 414 442 474 506 530 566
Suspended rods Ø d 8 10 12 14 16
1) Larger pin diameters apply for compression rods: Ø d1 D for compression rods, Ø d1 Z for tension rods - see „Navi“ - „Technical data“.
2) Max. adjustment length = 2xV 3) Rod length = system length -2xL6 4) L5 = Distance from centre of pin to plate edge

Subject to modifications Protected by several patents


Werb-Mail-EN-tech-Dat-05.03.14

You might also like