2

Aalco, founded in 1964, is today Standard Stock and

the UK’s largest independent ‘Specials’
multi-metals stockholder, with a This catalogue is intended to provide
£25 million inventory spanning an overview of the product range
aluminium, stainless steel, copper, together with the essential basic
brass, bronze and nickel alloys in all technical information. Please note
semi-finished forms. that the sizes shown for each
Aalco provides customers with a cost- product are those most widely used spanning decoiling, levelling, slitting
effective single source for all their and that many more options are and blanking. In addition, Aalco
metals requirements, together with available from Aalco’s 10,000 item regularly arranges other services for
a comprehensive processing service standard stock range. customers on a sub-contract basis.
offering all stock in standard sizes or Aalco has developed particular
Aalco also hold a significant range of
cut to customer’s instructions as well specialities in four key areas:
non-standard products as well as
as finishing and coating. No order is special items for particular industries Bar, tube and pipe cutting
too large or too small and Aalco and individual customers. In fact For bar, capacity is available to
offers a responsive and competitive around 40% of the stock at individual accurately cut anything from a single
service for supplying anything from branches falls into this category. 16"/406mm diameter billet to high
single item orders to major JIT
volume repetition
contracts, tailoring this service to the
blanking. For
individual needs of every customer.
tubular products
The unique combination of unrivalled there is an
product range, extensive processing equally flexible
facilities and flexible service makes range of facilities.
Aalco a clear market leader. This means
What’s more Aalco’s exceptional reliable deliveries
customer service means that 30,000 of cut pieces
customers from every sector of UK across the whole
manufacturing and engineering product range.
industry rely on Aalco for their
metals supplies. Processing Services Plate processing
Processed metals save time and Aalco’s plate processing facilities
With 20 companies across England,
money so many customers have provide a unique range of possibilities
Scotland, Wales & Ireland, Aalco
a need for cutting services. for cutting stainless steel, aluminium,
delivers to every corner of the UK.
Understanding this, Aalco is copper, brass, bronze and nickel alloy
Every Aalco branch holds stocks to
committed to providing an effective plate that is unmatched in the UK.
meet the immediate needs of
response and has thus made major Plate saws handle 4000mm lengths
customers in their local area.
investments in a wide range of in thicknesses up to 155mm. Plasma
This is backed up by bulk stocks
advanced processing equipment at cutting on air or submerged beds
held at a central warehouse.
both local branches and central provides blanks up to 130mm thick,
For a quotation, for further facilities. Most branches have on-site 2000mm wide, 4000mm long. Band
information, more extensive technical bar sawing, protective PVC coating saws cut circles 100mm thick up to
information, advice on product of sheet and a guillotine. Central 1000mm diameter. Laser cutting
selection or to place an order, please facilities include plate saws, provides a clean, accurate edge for
contact your local Aalco branch as polishing of sheet & coil and plasma thicknesses up to 50mm in 2000mm
shown on the back cover. profiling as well as coil processing widths and 4000mm lengths.
 3

Water Jet cutting provides intricate

detail to close tolerances for
thicknesses up to 100mm in 2000mm
width plates up to 4000mm long.
Guillotining provides cut plates up to
14 metres long, 12mm thick and
2000mm wide. Abrasive Disc cutting
provides a clean, smooth, square-cut This enables customers to benefit
Quality
edge on plates up to 75mm thick, from assistance in materials selection
Aalco takes great care when
2000mm wide, 4000mm long. In and choice of the most cost effective
selecting manufacturing sources for
addition Aalco offer Plate Decoiling processing options.
its products. Every mill is subjected
up to 12mm thick and 2000mm wide
to careful scrutiny and must meet
to provide plate blanks up to Whatever your requirement, in
a schedule of quality control
4000mm long. whatever quantity, it will pay you
requirements. Therefore, all products
supplied by Aalco conform to the to discuss your needs with your
Coil processing
relevant BS or international standard. local Aalco branch.
Our coil processing services cover
decoiling, levelling, slitting, spool A certificate of conformity or analysis
winding, blanking, piercing, notching can be supplied on request.
and circling as well as polishing and
Aalco branches operate a quality
protective coating. Aluminium and
manual designed to ISO9000/2000
stainless steel in thicknesses from
requirements. Many vendor
0.1mm to 3.0mm with widths up to
approvals and bespoke quality
2000mm are processed to close
control systems are operated
tolerances on a 22 specialist lines
through individual Aalco branches.
within a dedicated group facility that
is unequalled in Europe.
People
Surface finishing
Exceptional customer service starts
A significant percentage of the with people. Flexible people, whom
stainless steel sheet used today is
customers can trust and rely upon
supplied with a polished finish.
to provide quality advice and
Aalco has extensive polishing facilities
informed product knowledge in a
providing a range of finishes to meet
friendly manner.
every application. This includes a full
range of ground finishes as well as Aalco attracts, develops and retains
the premium OPTISHEEN™ finish. high quality people. Continuous
The unique wet-cut OPTISHEEN™ development of their skills includes
process produces a very consistent an in-house product-training
high quality surface meeting the programme giving them a complete
highest food-industry standards. understanding of the full range.
Aalco supplies many other surface-
finished products including polished
stainless steel plate, coil and tube,
anodised aluminium sheet and
extrusions as well as various
coloured and/or textured coatings.
4

ROLLED PRODUCTS (SHEET)

Stainless steel is not a single specific

Sheet 1.4301 (304) 2B Finish EN10088.2-95
material – it is the name given to a
group of corrosion-resistant steels Size Weight Size Weight
(mm) per sheet (Kg) (mm) per sheet (Kg)
containing a minimum of 11%
chromium – varying additions of 2000 x 1000 x 0.5 8.2 3000 x 1500 x 1.2 44.2
nickel, molybdenum, titanium, 2500 x 1250 x 0.5 12.8 2000 x 1000 x 1.5 24.6
niobium and other elements may 2000 x 1000 x 0.7 11.5 2500 x 1250 x 1.5 38.4
also be present. The mechanical 2500 x 1250 x 0.7 17.9 3000 x 1500 x 1.5 55.3
properties, corrosion resistance and 2000 x 1000 x 0.8 13.1 2000 x 1000 x 2.0 32.7
behaviour in service of each type of 2500 x 1250 x 0.8 20.5 2500 x 1250 x 2.0 51.2
steel depends upon its composition 2000 x 1000 x 0.9 14.7 3000 x 1500 x 2.0 73.7
and consequently a carefully 2500 x 1250 x 0.9 23.0 2000 x 1000 x 2.5 40.9
considered choice of steel is vital. 3000 x 1500 x 0.9 33.2 2500 x 1250 x 2.5 63.9
2000 x 1000 x 1.0 16.4 3000 x 1500 x 2.5 92.1
Aalco stocks all of the commonly
2500 x 1250 x 1.0 25.6 2000 x 1000 x 3.0 49.6
required forms of stainless steel
3000 x 1500 x 1.0 36.8 2500 x 1250 x 3.0 77.5
including sheet, coil, strip, plate,
2000 x 1000 x 1.2 19.6 3000 x 1500 x 3.0 112
bar and sections as well as a full
2500 x 1250 x 1.2 30.7
range of tube, pipe, fittings and
flanges. In addition to a
comprehensive range of standard
products, Aalco branches stock
industry specific items and customer Sheet 1.4301 (304) 2R (BA) Finish EN10088.2-95
specials with numerous specialist
Size Weight Size Weight
products and alloys satisfying the (mm) per sheet (Kg) (mm) per sheet (Kg)
needs of a broad range of
2000 x 1000 x 0.5 8.2 2500 x 1250 x 1.0 25.6
industries. Aalco also provides a
2500 x 1250 x 0.5 12.8 2000 x 1000 x 1.2 19.6
complete range of processing
2000 x 1000 x 0.7 11.5 2500 x 1250 x 1.2 30.7
services spanning: bar, tube & pipe
2500 x 1250 x 0.7 17.9 2000 x 1000 x 1.5 24.6
cutting; plate processing; coil
2500 x 1250 x 0.8 20.5 2500 x 1250 x 1.5 38.4
processing and surface finishing.
2000 x 1000 x 0.9 14.7 2000 x 1000 x 2.0 32.7
2500 x 1250 x 0.9 23.0 2500 x 1250 x 2.0 51.2
2000 x 1000 x 1.0 16.4

Sheet 1.4401/1.4404 (316/316L) 2B Finish EN10088.2-95

Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg)

2000 x 1000 x 0.7 11.5 3000 x 1500 x 1.5 55.3

2500 x 1250 x 0.7 17.9 2000 x 1000 x 2.0 32.7
2000 x 1000 x 0.9 14.7 2500 x 1250 x 2.0 51.2
2500 x 1250 x 0.9 23.0 3000 x 1500 x 2.0 73.7
2500 x 1250 x 1.0 25.6 2000 x 1000 x 2.5 40.9
2000 x 1000 x 1.2 19.6 2500 x 1250 x 2.5 63.9
2500 x 1250 x 1.2 30.7 3000 x 1500 x 2.5 92.1
3000 x 1500 x 1.2 44.2 2000 x 1000 x 3.0 49.6
2000 x 1000 x 1.5 24.6 2500 x 1250 x 3.0 77.5
2500 x 1250 x 1.5 38.4 3000 x 1500 x 3.0 112
 5

ROLLED PRODUCTS (SHEET)

Sheet 1.4301 (304) Polished 240 grit, white poly coat EN10088.2-95

Size Weight Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg) (mm) per sheet (Kg)

2000 x 1000 x 0.7 11.5 2500 x 1250 x 1.2 30.7 2000 x 1000 x 2.5 40.9
2500 x 1250 x 0.7 17.9 3000 x 1500 x 1.2 44.2 2500 x 1250 x 2.5 63.9
2000 x 1000 x 0.9 14.7 2000 x 1000 x 1.5 24.6 3000 x 1500 x 2.5 92.1
2500 x 1250 x 0.9 23.0 2500 x 1250 x 1.5 38.4 2000 x 1000 x 3.0 49.6
2000 x 1000 x 1.0 16.4 3000 x 1500 x 1.5 55.3 2500 x 1250 x 3.0 77.5
2500 x 1250 x 1.0 25.6 2000 x 1000 x 2.0 32.7 3000 x 1500 x 3.0 112
3000 x 1500 x 1.0 36.8 2500 x 1250 x 2.0 51.2
2000 x 1000 x 1.2 19.6 3000 x 1500 x 2.0 73.7

Sheet 1.4401/1.4404 (316/316L) Polished 240 grit, white poly coat EN10088.2-95

Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg)

2500 x 1250 x 1.2 30.7 2500 x 1250 x 2.0 51.2

3000 x 1500 x 1.2 44.2 3000 x 1500 x 2.0 73.7
2500 x 1250 x 1.5 38.4 2500 x 1250 x 3.0 77.5
3000 x 1500 x 1.5 55.3 3000 x 1500 x 3.0 112

Sheet 1.4016 (430) Polished 240 grit, white poly coat EN10088.2-95

Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg)

2000 x 1000 x 0.7 11.5 2500 x 1250 x 1.0 25.6

2500 x 1250 x 0.7 17.9 2000 x 1000 x 1.2 19.6
2000 x 1000 x 0.9 14.7 2500 x 1250 x 1.2 30.7
2500 x 1250 x 0.9 23.0 2000 x 1000 x 1.5 24.6
2000 x 1000 x 1.0 16.4 2500 x 1250 x 1.5 38.4

Sheet 1.4016 (430) 2R (BA) Finish EN10088.2-95

Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg)

2000 x 1000 x 0.5 8.2 2500 x 1250 x 1.0 25.6

2500 x 1250 x 0.5 12.8 2000 x 1000 x 1.2 19.6
2000 x 1000 x 0.7 11.5 2500 x 1250 x 1.2 30.7
2500 x 1250 x 0.7 17.9 2000 x 1000 x 1.5 24.6
2500 x 1250 x 0.8 20.5 2500 x 1250 x 1.5 38.4
2000 x 1000 x 0.9 14.7 2000 x 1000 x 2.0 32.7
2500 x 1250 x 0.9 23.0 2500 x 1250 x 2.0 51.2
2000 x 1000 x 1.0 16.4
6

ROLLED PRODUCTS (SHEET & PLATE)

Plate/Sheet 1.4003 1D Finish EN10088.2-95

Size Weight Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg) (mm) per sheet (Kg)

2000 x 1000 x 1.5 (2B) 24.9 2500 x 1250 x 3.0 77.7 2500 x 1250 x 5.0 128
2500 x 1250 x 1.5 (2B) 38.9 3000 x 1500 x 3.0 112 3000 x 1500 x 5.0 184
2000 x 1000 x 2.0 33.2 2000 x 1000 x 4.0 66.4 2000 x 1000 x 6.0 98.2
2500 x 1250 x 2.0 51.8 2500 x 1250 x 4.0 102 2500 x 1250 x 6.0 153
3000 x 1500 x 2.0 74.6 3000 x 1500 x 4.0 147 3000 x 1500 x 6.0 221
2000 x 1000 x 3.0 49.7 2000 x 1000 x 5.0 81.9

Plate: Cold Rolled, Descaled ASTM A240, ASME SA 240 Type 1.4307 (304L) and 1.4404 (316L)
EN10088.2-95

Size Weight Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg) (mm) per sheet (Kg)

4000 x 2000 x 2.0 136.0 3000 x 1500 x 4.0 153.0 4000 x 2000 x 5.0 340.0
6000 x 2000 x 2.0 204.0 4000 x 2000 x 4.0 272.0 6000 x 2000 x 5.0 510.0
4000 x 2000 x 3.0 204.0 6000 x 2000 x 4.0 409.0 2500 x 1250 x 6.0 159.0
6000 x 2000 x 3.0 306.0 2500 x 1250 x 5.0 133.0 3000 x 1500 x 6.0 230.0
2500 x 1250 x 4.0 106.0 3000 x 1500 x 5.0 191.0 4000 x 2000 x 6.0 408.0

CPP Plate 1D Finish ASTM A240, ASME SA240: 304, 304L, 304H, 321, 316, 316L, 310, UNS31803
EN10088.2-95: 1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.0095, 1.4462

Size Weight Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg) (mm) per sheet (Kg)

2000 x 1000 x 3.0 51.0 2500 x 1250 x 6.0 159 6000 x 1500 x 10.0 765
2500 x 1250 x 3.0 79.7 3000 x 1500 x 6.0 230 6000 x 2000 x 10.0 1020
3000 x 1500 x 3.0 115 4000 x 2000 x 6.0 408 8000 x 2000 x 10.0 1360
2000 x 1000 x 4.0 68.0 6000 x 2000 x 6.0 612 2500 x 1250 x 12.0 319
2500 x 1250 x 4.0 106 2500 x 1250 x 8.0 213 3000 x 1500 x 12.0 459
3000 x 1500 x 4.0 153 3000 x 1500 x 8.0 306 4000 x 1500 x 12.0 612
2000 x 1000 x 5.0 85.0 4000 x 2000 x 8.0 544 4000 x 2000 x 12.0 816
2500 x 1250 x 5.0 133 6000 x 2000 x 8.0 816 6000 x 1500 x 12.0 918
3000 x 1500 x 5.0 191 2500 x 1250 x 10.0 266 6000 x 2000 x 12.0 1224
4000 x 2000 x 5.0 340 3000 x 1500 x 10.0 383 8000 x 2000 x 12.0 1632
6000 x 2000 x 5.0 510 4000 x 1500 x 10.0 510
2000 x 1000 x 6.0 102 4000 x 2000 x 10.0 680

Welded Mesh Type 304

Size Weight Size Weight

(mm) per sheet (Kg) (mm) per sheet (Kg)

96” x 48” x 1/2” x 1/2” x 16 swg 6.50 48” x 96” x 3” x 1/2” x 12 swg 11.00
96” x 48” x 3” x /2” x 10 swg
1
16.00 96” x 48” x 1” x 1” x 12 swg 9.50
96” x 48” x 3” x / ” x 12 swg
1
2 11.00 96” x 48” x 1 / ” x 1 / ” x 10 swg
1
2
1
2 9.00
96” x 48” x 1” x 1” x 10 swg 13.00 96” x 48” x 2” x 2” x 10 swg 7.00
48” x 96” x 3” x 1/2” x 10 swg 16.00 96” x 48” x 2” x 2” x 12 swg 5.00
 7

ROLLED PRODUCTS (SHEET & PLATE)

Quarto Plate 1D Finish ASTM A240, ASME SA240: 304, 304L, 304H, 321, 316, 316L, 310, UNS31803
EN10088.2-95: 1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.0095, 1.4462, BS1501 Pt3: 304S31,
304S11, 321S31, 316S31, 316S11, 310S16

Size Unit Weight Size Unit Weight Size Unit Weight

(mm) per square metre (Kg) (mm) per square metre (Kg) (mm) per square metre (Kg)

5 42.5 22 187 55 468

6 51.0 25 213 60 510
8 68.0 30 255 65 553
10 85.0 32 272 70 596
12 102 35 298 75 638
15 128 40 340 90 765
16 136 45 383 100 850
20 170 50 426 125 1063

Cold Rolled Tolerances (From EN 10259)

Thickness Thickness Tolerance Width Tolerance
T (mm) + or – (mm) for given Width -0mm / +mm as shown for given width
T over T less than Up to 1000mm Over 1000mm 600mm to 1000mm Over 1000mm

– 0.5 0.04 – 1.5 2.0

0.5 0.6 0.045 0.05 1.5 2.0
0.6 0.8 0.05 0.05 1.5 2.0
0.8 1.0 0.055 0.06 1.5 2.0
1.0 1.2 0.06 0.07 1.5 2.0
1.2 1.5 0.07 0.08 1.5 2.0
1.5 2.0 0.08 0.10 2.0 2.5
2.0 2.5 0.09 0.11 2.0 2.5
2.5 3.0 0.11 0.12 3.0 3.0
3.0 – 0.13 0.15 4.0 4.0
Length tolerance: –0 / 5mm for a 2 metre long sheet, -0 / + 7.5mm for a 3 metre long sheet, up to –0 / +25mm for a 10 metre long sheet

Hot Rolled Tolerances for Quarto Plate (From EN 10029)

Width (mm) Width tolerance (mm) Length (mm) Length tolerance (mm)
600 to <2000 -0 / +20 <4000 -0 / +20
2000 to <3000 -0 / +25 4000 to <6000 -0 / +30
3000 + over -0 / +30 6000 to <8000 -0 / +40
8000 to <10000 -0 / +50
Thickness Thickness Tolerance (mm)
Class A Class B Class C Class D
3.0 to 4.9 +0.8 / -0.4 +0.9 / -0.3 +1.2 / -0 +/- 0.6
5.0 to 7.9 +1.1 / -0.4 +1.2 / -0.3 +1.5 / -0 +/- 0.75
8.0 to 14.9 +1.2 / -0.5 +1.4 / -0.3 +1.7 / -0 +/- 0.85
15.0 to 24.9 +1.3 / -0.6 +1.6 / -0.3 +1.9 / -0 +/- 0.95
25.0 to 39.9 +1.4 / -0.8 +1.9 / -0.3 +2.2 / -0 +/- 1.1
40.0 to 79.9 +1.8 / -1.0 +2.5 / -0.3 +2.8 / -0 +/- 1.4
80.0 to 149.9 +2.2 / -1.0 +2.9 / -0.3 +3.2 / -0 +/- 1.6
150 and over +2.4 / -1.2 +3.3 / -0.3 +3.6 / -0 +/- 1.8

Hot Rolled Tolerances for Plate from Coil (From EN 10051)

Width (mm) Width tolerance (mm) Length (mm) Length tolerance (mm)
<1200 -0 / +3 <2000 -0 / +10
1200 to <1500 -0 / +5 2000 to <8000 -0 / 0.005 x Length
1500 + over -0 / +6 8000 + over -0 / 40

Thickness Thickness Tolerance + or – (mm) for given width in mm

Up to 1200 1200+ to 1500 1500+ to 1800 Over 1800
Up to 2.0 0.17 0.19 0.21 –
2.01 to 2.5 0.18 0.21 0.23 0.25
2.51 to 3.0 0.20 0.22 0.24 0.26
3.01 to 4.0 0.22 0.24 0.26 0.27
4.01 to 5.0 0.24 0.26 0.28 0.29
5.01 to 6.0 0.26 0.28 0.29 0.31
6.01 to 8.0 0.29 0.30 0.31 0.35
8.01 to 10.0 0.32 0.33 0.34 0.40
10.01 to 12.5 0.35 0.36 0.37 0.43
12.51 to 15.0 0.37 0.38 0.40 0.46
8

BAR & SECTIONS

Round 1.4305 (303S31) Bright drawn EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

3mm 0.06 8mm 0.40 16mm 1.59

⁄ 8”
1
0.06 ⁄8”
3
0.56 11
⁄16” 1.89
4mm 0.10 10mm 0.62 18mm 2.01
⁄16”
3
0.14 ⁄16”
7
0.77 3
⁄4” 2.25
5mm 0.16 12mm 0.89 20mm 2.48
⁄4”
1
0.25 ⁄2”
1
1.00 22mm 3.00
6mm 0.22 ⁄16”
9
1.22 7
⁄8” 3.07
⁄4”
1
0.25 14mm 1.22 24mm 3.57
7mm 0.30 15mm 1.40 25mm 3.88
⁄16”
5
0.39 ⁄8”
5
1.56 1” 4.03

Round 1.4305 (303S31) Smooth Turned/Bright Ground EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

25mm 3.88 40mm 9.93 21⁄4” 20.3

1” 4.03 1 ⁄8”
5
10.6 60mm 22.3
11⁄8” 5.07 13⁄4” 12.2 23⁄8” 22.6
30mm 5.58 45mm 2 ⁄2”1
25.0
11⁄4” 6.25 17⁄8” 14.1 25⁄8” 27.6
1 ⁄8”
3
7.57 50mm 15.5 2 ⁄4”3
30.3
35mm 7.60 2” 16.0 3” 36.0
11⁄2” 9.01 21⁄8” 18.1

Round 1.4305 (303S31) Rough Turned EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

31⁄4” 42.9 41⁄4” 73.4 5” 102

3 ⁄2”
1
49.8 4 ⁄2”
1
82.3 6” 146
33⁄4” 57.1 43⁄4” 91.7 7” 199
4” 65.0

Round 1.4301/1.4307 (304/304L) Bright Drawn EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

3mm 0.06 8mm 0.40 5

⁄8” 1.56
⁄ 8”
1
0.06 ⁄8”
3
0.56 16mm 1.59
4mm 0.10 10mm 0.62 11
⁄16” 1.89
⁄16”
3
0.14 ⁄16”
7
0.77 3
⁄4” 2.25
5mm 0.16 12mm 0.89 20mm 2.48
6mm 0.22 ⁄2”
1
1.00 7
⁄8” 3.07
⁄4”
1
0.25 ⁄16”
9
1.27 25mm 3.88
⁄16”
5
0.39 15mm 1.40 1” 4.03
 9

BAR & SECTIONS

Round 1.4301/1.4307 (304/304L) Smooth Turned EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

25mm 3.88 11⁄2” 9.01 21⁄4” 20.3

1” 4.03 40mm 9.93 60 mm 22.3
1 ⁄8”
1
5.07 1 ⁄8”
5
10.6 2 ⁄2”1
25.0
30mm 5.58 13⁄4” 12.2 23⁄4” 30.3
1 ⁄4”
1
6.25 50 mm 15.5 3” 36.0
13⁄8” 7.57 2” 16.0

Round 1.4301/1.4307 (304/304L) Rough Turned EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

3” 36.0 53⁄4” 134 9” 329

31⁄ 4” 42.9 6” 146 10” 406
31⁄ 2” 49.8 61⁄4” 101⁄2” 441
33⁄ 4” 57.1 61⁄2” 172 11” 492
4” 65.0 63⁄4” 285mm 512
41⁄4” 73.4 7” 199 12” 585
41⁄2” 82.3 185mm 216 340mm 728
5” 102 71⁄2” 229 14” 796
51⁄4” 110 8” 260 16” 1040
51⁄2” 123 81⁄2” 294

Round 1.4401/1.4404 (316/316L) Bright Drawn EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

3mm 0.06 ⁄ 8”
3
0.57 16mm 1.60
⁄ 8”
1
0.06 10mm 0.63 11
⁄ 16” 1.91
4mm 0.10 ⁄ 16”
7
0.77 18mm 2.03
⁄ 16”
3
0.14 12mm 0.90 3
⁄ 4” 2.27
5mm 0.16 ⁄ 2”
1
1.01 20mm 2.50
6mm 0.23 14mm 1.23 7
⁄ 8” 3.09
⁄ 4”
1
0.25 ⁄ 16”
9
1.28 24mm 3.60
⁄ 16”
5
0.39 15mm 1.41 25mm 3.91
8mm 0.40 ⁄ 8”
5
1.58 1” 4.03
10

BAR & SECTIONS

Round 1.4401/1.4404 (316/316L) Smooth Turned/Bright Ground EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

25mm 3.91 11⁄2” 9.08 21⁄8” 18.2

1” 4.03 40mm 10.0 21⁄4” 20.4
1 ⁄8”
1
5.11 1 ⁄8”
5
10.7 2 ⁄8”
3
22.8
30mm 5.63 13⁄4” 12.4 60mm 22.5
1 ⁄4”
1
6.30 45mm 12.7 2 ⁄2”
1
25.2
32mm 6.40 17⁄8” 14.2 25⁄8” 27.8
1 ⁄8”
3
7.63 50mm 15.6 2 ⁄4”
3
30.5
35mm 7.66 2” 16.1 3” 36.3

Round 1.4401/1.4404 (316/316L) Rough Turned EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

3” 36.3 51⁄ 2” 123 81⁄ 2” 296

31⁄ 4” 43.2 53⁄ 4” 135 220mm 307
3 ⁄ 2”
1
50.2 6” 147 9” 332
33⁄ 4” 57.6 61⁄ 4” 160 10” 409
4” 65.5 61⁄ 2” 173 11” 495
41⁄ 4” 73.9 7” 201 285mm 515
4 ⁄ 2”
1
82.9 185mm 217 12” 590
43⁄ 4” 92.4 71⁄ 4” 215 340mm 734
5” 102 7 ⁄ 2”
1
230 14” 802
51⁄ 4” 113 8” 262 16” 1049

Round 1.4005 (416S21 QT650) Bright Drawn/Smooth Turned EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

⁄4”
1
0.24 16mm 1.59 35mm 7.60
6mm 0.22 ⁄4”
3
2.19 1 ⁄2”
1
8.78
⁄16”
5
0.38 20mm 2.48 40mm 9.93
8mm 0.40 ⁄8”
7
2.99 1 ⁄4”
3
11.9
⁄8”
3
0.55 25mm 3.88 50mm 15.50
10mm 0.60 1” 3.90 2” 15.6
⁄16”
7
0.75 11⁄8” 4.94 21⁄4” 19.8
12mm 0.89 30mm 5.58 2 ⁄2”
1
24.4
⁄2”
1
0.98 11⁄4” 6.10 23⁄4” 29.5
⁄8”
5
1.53 1 ⁄8”
3
7.38 3” 35.1
 11

BAR & SECTIONS

Duplex Round UNS31803/EN1.4462 Annealed/Smooth Turned EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

1” 4.03 2” 16.0 3” 36.0

11⁄ 4” 6.26 21⁄4” 20.3 31⁄ 4” 42.3
1 ⁄ 2”
1
9.07 2 ⁄2”
1
25.0 100mm 62.0
13⁄ 4” 12.3 23⁄ 4” 30.3

Round 1.4057 (431S29 QT850) Drawn/Smooth Turned/Peeled EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

6mm 0.22 ⁄ 4”
3
2.19 13⁄ 4” 11.9
8mm 0.40 20mm 2.42 45mm 12.2
⁄ 4”
1
0.24 ⁄ 8”
7
2.99 50mm 15.50
⁄ 16”
5
0.38 25mm 3.78 2” 15.6
⁄ 8”
3
0.55 1” 3.90 21⁄ 4” 19.8
10mm 0.60 1 ⁄ 8”
1
4.94 23⁄ 8” 22.0
⁄ 16”
7
0.75 30mm 5.58 2 ⁄ 2”
1
24.4
12mm 0.87 11⁄ 4” 6.10 25⁄ 8” 26.9
⁄ 2”
1
0.98 1 ⁄ 8”
3
7.38 2 ⁄ 4”
3
29.5
⁄ 16”
9
1.23 35mm 7.60 3” 35.1
⁄ 8”
5
1.53 11⁄ 2” 8.78 31⁄ 4” 41.2
16mm 1.55 40mm 9.93 31⁄ 2” 47.8

Flat 1.4301/1.4307 (304/304L) & 1.4401/1.4404 (316/316L) hot rolled EN10088.3-95

Size Weight Size Weight Size Weight
(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

20 x 10 1.58 25 x 15 2.96 60 x 20 9.48

25 x 10 1.98 30 x 15 3.56 75 x 20 11.9
30 x 10 2.37 40 x 15 4.74 100 x 20 15.8
40 x 10 3.16 50 x 15 5.93 30 x 25 5.93
50 x 10 3.95 60 x 15 7.11 40 x 25 7.90
60 x 10 4.74 75 x 15 8.88 50 x 25 9.88
75 x 10 5.93 100 x 15 11.9 60 x 25 11.9
100 x 10 7.90 25 x 20 3.95 75 x 25 14.8
20 x 12 1.90 30 x 20 4.74 100 x 25 19.8
25 x 12 2.37 40 x 20 6.32
30 x 12 2.84 50 x 20 7.90
12

BAR & SECTIONS

Flat 1.4301 (304) – 1.4404 (316L) Rolled Edge EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

12 x 3 0.28 75 x 5 2.96 75 x 8 4.74

20 x 3 0.47 100 x 5 3.95 100 x 8 6.32
25 x 3 0.59 12 x 6 0.57 25 x 10 1.98
30 x 3 0.71 20 x 6 0.95 30 x 10 2.37
40 x 3 0.95 25 x 6 1.19 40 x 10 3.16
50 x 3 1.19 30 x 6 1.42 50 x 10 3.95
60 x 3 1.42 40 x 6 1.90 60 x 10 4.74
75 x 3 1.78 45 x 6 2.13 75 x 10 5.93
100 x 3 2.37 50 x 6 2.37 80 x 10 6.32
12 x 5 0.47 60 x 6 2.84 100 x 10 7.90
20 x 5 0.79 75 x 6 3.56 40 x 12 3.79
25 x 5 0.99 100 x 6 4.74 50 x 12 4.74
30 x 5 1.19 25 x 8 1.58 60 x 12 5.69
40 x 5 1.58 30 x 8 1.90 75 x 12 7.11
45 x 5 1.78 40 x 8 2.53 100 x 12 9.48
50 x 5 1.98 50 x 8 3.16
60 x 5 2.37 60 x 8 3.79

Hexagon 1.4305 (303S31) & 1.4404 (316L) EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

.3125” 0.43 .710” 2.22 1.250” 6.90

.324” 0.46 .750” 2.48 1.300” 7.46
.375” 0.62 .820” 2.97 1.375” 8.35
.437” 0.84 .875” 3.38 1.480” 9.67
.500” 1.10 .920” 3.74 1.500” 9.93
.525” 1.22 .9375” 3.88 1.670” 12.3
.562” 1.39 1.010” 4.50 1.750” 13.5
.600” 1.59 1.100” 5.35 1.860” 15.3
.625” 1.73 1.125” 5.59 2.375” 24.9
17mm 1.98 1.200” 6.36 2.500” 27.6
 13

BAR & SECTIONS

Equal Angle 1.4301/1.4307 (304/304L) & 1.4401/1.4404 (316/316L) EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

20 x 20 x 3 0.88 40 x 40 x 3 1.83 60 x 60 x 5 4.58

25 x 25 x 3 1.12 40 x 40 x 5 2.96 60 x 60 x 6 5.40
25 x 25 x 5 1.78 40 x 40 x 6 3.51 60 x 60 x 10 8.69
25 x 25 x 6 2.09 50 x 50 x 3 2.30 70 x 70 x 6 6.35
30 x 30 x 3 1.35 50 x 50 x 5 3.75 70 x 70 x 10 10.3
30 x 30 x 5 2.17 50 x 50 x 6 4.46 100 x 100 x 6 9.20
30 x 30 x 6 2.56 50 x 50 x 10 7.11 100 x 100 x 10 15.0

Square 1.4301/1.4307 (304/304L) & 1.4401/1.4404 (316/316L) EN10088.3-95

Size Weight Size Weight Size Weight

(mm) per metre (Kg) (mm) per metre (Kg) (mm) per metre (Kg)

6x6 0.28 16 x 16 2.02 11⁄2” x 11⁄2” 11.5

8x8 0.51 20 x 20 3.16 40 x 40 12.6
10 x 10 0.79 25 x 25 4.94 45 x 45 16.0
12 x 12 1.14 30 x 30 7.11 50 x 50 19.8

Hollow Bar 304S15 316S31

Aalco stock 160 sizes of hollow bar in the size range 32 x 20 to 190 x 132. For further information please
contact your local Aalco service centre.
14

PIPE

Seamless Pipe ASTM A312, 304L

WALL THICKNESS (mm)

NPS/NB SCH SCH SCH

(in) 10S 40S 80S

⁄4
1
– 0.088 0.119
⁄8
3
0.065 0.091 –
⁄2
1
0.083 0.109 0.147
⁄4
3
– 0.113 0.154
1 0.109 0.133 0.179
11⁄4 0.109 0.140 0.191
1 ⁄2
1
0.109 0.145 0.200
2 0.109 0.154 0.218
2 ⁄2
1
– 0.203 –
3 0.120 0.216 –
4 0.120 0.237 –
5 0.134 0.258 –
6 0.134 0.280 0.432
8 0.148 0.322 0.500

Seamless Pipe ASTM A312, 316L

WALL THICKNESS (mm)

NPS/NB SCH SCH SCH SCH

(in) 10S 40S 80S 160

⁄8
1
0.049 – – –
⁄4
1
0.065 0.088 0.119 –
⁄8
3
0.065 0.091 0.126 –
⁄2
1
0.083 0.109 0.147 0.188
⁄4
3
0.083 0.113 0.154 0.219
1 0.109 0.133 0.179 0.250
1 ⁄4
1
– – 0.191 –
11⁄2 0.109 0.145 0.200 0.281
2 0.109 0.154 0.218 0.344
21⁄2 0.120 0.203 0.276 –
3 0.120 0.216 0.300 0.438
31⁄2 0.120 0.226 – –
4 0.120 0.237 0.337 –
5 – 0.258 – –
6 0.134 0.280 0.432 –
8 0.148 0.322 0.500 0.906
 15

PIPE

Welded Pipe ASTM A312, 304L & 316L

ASTM A312, 304L ASTM A312, 316L
WALL THICKNESS (mm) WALL THICKNESS (mm)
NPS/NB SCH SCH SCH NPS/NB SCH SCH SCH
(in) 5S 10S 40S (in) 5S 10S 40S

⁄2
1
0.065 0.083 0.109 ⁄2
1
0.065 0.083 0.109
⁄4
3
0.065 0.083 0.113 ⁄4
3
0.065 0.083 0.113
1 0.065 0.109 0.133 1 0.065 0.109 0.133
1 ⁄4
1
0.065 0.109 0.140 1 ⁄4
1
– 0.109 0.140
11⁄2 – 0.109 0.145 11⁄2 0.065 0.109 0.145
2 0.065 0.109 0.154 2 0.065 0.109 0.154
21⁄2 0.083 0.120 0.203 21⁄2 0.083 0.120 0.203
3 0.083 0.120 0.216 3 0.083 0.120 0.216
31⁄2 – 0.120 0.226 31⁄2 0.083 0.120 0.226
4 0.083 0.120 0.237 4 0.083 0.120 0.237
5 – 0.134 0.258 5 – 0.134 0.258
6 0.109 0.134 0.280 6 0.109 0.134 0.280
8 0.109 0.148 0.322 8 0.109 0.148 0.322
10 0.134 0.165 0.365 10 0.134 0.165 0.365
12 0.156 0.180 0.375 12 0.156 0.180 0.375
14 – 0.188 – 14 – 0.188 –
16 – 0.188 – 16 – 0.188 –
18 – 0.188 – 18 – 0.188 –
20 – 0.218 – 20 – 0.218 –
24 – 0.250 – 24 – 0.250 –

Tolerances

Wall Thickness: The minimum wall thickness at any point shall not be more than 12.5% under the nominal
wall thickness specified.

Length (for cut lengths): -0/+6mm

Outside Diameter: -0.8mm (0.031”) and plus the amount shown in the table.

Nominal Pipe Size (in) 1

⁄8 to 11⁄2 11⁄2+ to 4 4+ to 8 8+ to 18 18+ to 26 26+ to 34 34+ to 48

Plus Tolerance (mm) 0.400 0.800 1.600 2.400 3.200 4.000 4.800
on O/D (in) 0.015 0.031 0.062 0.093 0.125 0.156 0.187
16

PIPE

Pipe dimensions and weights per metre ANSI/ASME B36.19M-1985

1 1
OD Schedule 5S Schedule 10S Schedule 40S Schedule 80S
Pipe Size
Nominal

in mm in mm kg/m in mm kg/m in mm kg/m in mm kg/m

1
⁄8 0.405 10.3 – – – 0.049 1.24 0.28 0.068 1.73 0.37 0.095 2.41 0.47
1
⁄4 0.540 13.7 – – – 0.065 1.65 0.49 0.088 2.24 0.63 0.119 3.02 0.80
3
⁄8 0.675 17.1 – – – 0.065 1.65 0.63 0.091 2.31 0.84 0.126 3.20 1.10
1
⁄2 0.840 21.3 0.065 1.65 0.80 0.083 2.11 1.00 0.109 2.77 1.27 0.147 3.73 1.62
3
⁄4 1.050 26.7 0.065 1.65 1.03 0.083 2.11 1.28 0.113 2.87 1.69 0.154 3.91 2.20
1 1.315 33.4 0.065 1.65 1.30 0.109 2.77 2.09 0.133 3.38 2.50 0.179 4.55 3.24
1
1 ⁄4 1.660 42.2 0.065 1.65 1.65 0.109 2.77 2.70 0.140 3.56 3.39 0.191 4.85 4.47
11⁄2 1.900 48.3 0.065 1.65 1.91 0.109 2.77 3.11 0.145 3.68 4.05 0.200 5.08 5.41
2 2.375 60.3 0.065 1.65 2.40 0.109 2.77 3.93 0.154 3.91 5.44 0.218 5.54 7.48
21⁄2 2.875 73.0 0.083 2.11 3.69 0.120 3.05 5.26 0.203 5.16 8.63 0.276 7.01 11.41
3 3.500 88.9 0.083 2.11 4.51 0.120 3.05 6.45 0.216 5.49 11.29 0.300 7.62 15.27
31⁄2 4.000 101.6 0.083 2.11 5.18 0.120 3.05 7.40 0.226 5.74 13.57 0.318 8.08 18.63
4 4.500 114.3 0.083 2.11 5.84 0.120 3.05 8.36 0.237 6.02 16.07 0.337 8.56 22.32
5 5.563 141.3 0.109 2.77 9.47 0.134 3.40 11.57 0.258 6.55 21.77 0.375 9.53 30.97
6 6.625 168.3 0.109 2.77 11.32 0.134 3.40 13.84 0.280 7.11 28.26 0.432 10.97 42.56
8 8.625 219.1 0.109 2.77 14.79 0.148 3.76 19.96 0.322 8.18 42.55 0.500 12.70 64.64
10 10.750 273.1 0.134 3.40 22.63 0.165 4.19 27.78 0.365 9.27 60.31 0.500 12.70 2 2
96.012
12 12.750 323.9 0.156 3.96 31.25 0.180 4.57 36.00 0.375 2
9.53 2
73.88 0.500 12.70 132.082
2 2 2

14 14.000 355.6 0.156 3.96 34.36 0.1882 4.782 41.302 – – – – – –

16 16.000 406.4 0.165 4.19 41.56 0.1882 4.782 47.292 – – – – – –
18 18.000 457 0.165 4.19 46.81 0.188 2
4.78 2
53.26 2
– – – – – –
20 20.000 508 0.188 4.78 59.25 0.2182 5.542 68.612 – – – – – –
22 22.000 559 0.188 4.78 65.24 0.218 2
5.54 2
75.53 2
– – – – – –
24 24.000 610 0.218 5.54 82.47 0.250 6.35 94.45 – – – – – –
30 30.000 762 0.250 6.35 118.31 0.312 7.92 147.36 – – – – – –

Notes
1 Schedules 5S and 10S wall thicknesses do not permit threading in accordance with ANSI/ASME B1.20.1.
2 These dimensions and weights do not conform to ANSI/ASME B36.10M.
– The suffix ‘S’ after the schedule number indicates that the pipe dimensions and weight are in compliance with this stainless steel pipe
specification, ANSI/ASME B36.19M-1985, and not the more general ANSI/ASME B36.10M-1995 specification.
– Although this specification is applicable to stainless steel, quoted weights are for carbon steel pipe and should be multiplied by 1.014 for
austenitic and duplex steels, or by 0.985 for ferritic and martensitic steels.
 17

BUTT WELD FITTINGS

Seamless Butt weld fittings ASTM A403, 316L

NPS/NB 90° LR ELBOWS 90° SR ELBOWS 45° LR ELBOWS STUB

(in) ENDS

SCH SCH SCH SCH SCH SCH SCH SCH SCH

10S 40S 80S 10S 40S 10S 40S 80S 10S

⁄2
1
✔ ✔ ✔ – – ✔ ✔ – –
⁄4
3
✔ ✔ ✔ – – ✔ ✔ – ✔
1 ✔ ✔ ✔ – – ✔ ✔ – ✔
1 ⁄4
1
✔ ✔ – – – – – – –
11⁄2 ✔ ✔ ✔ – – ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ – ✔
21⁄2 ✔ ✔ ✔ – – – ✔ ✔ ✔
3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ – ✔
4 ✔ ✔ ✔ – – ✔ ✔ – ✔
5 ✔ – ✔ ✔ – – – ✔
6 ✔ ✔ ✔ ✔ ✔ ✔ ✔ – ✔
8 ✔ ✔ – – – – – – ✔

NPS/NB EQUAL TEES END CAPS

(in)

SCH SCH SCH SCH SCH

10S 40S 80S 10S 40S

⁄2
1
✔ ✔ ✔ ✔ ✔
⁄4
3
✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔
11⁄4 ✔ – – ✔ ✔
11⁄2 ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔
2 ⁄2
1
✔ ✔ ✔ ✔ ✔
3 ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔
6 ✔ ✔ ✔ ✔ ✔
8 – ✔ – ✔ ✔
18

BUTT WELD FITTINGS

Seamless Butt Weld Fittings ASTM A403, 316L

NPS/NB CON RED ECC RED RED TEE

(in)

SCH SCH SCH SCH SCH SCH SCH SCH SCH

10S 40S 80S 10S 40S 80S 10S 40S 80S

1 x 1⁄2 ✔ ✔ ✔ ✔ ✔ – ✔ ✔ –
1 x 3⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄4 x 1 ✔ ✔ – ✔ – – – – –
11⁄2 x 1⁄2 ✔ ✔ – ✔ – – ✔ ✔ ✔
11⁄2 x 1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 x 11⁄4 ✔ ✔ – ✔ – – – – –
2 x ⁄2
1
✔ – – – – – – – –
2 x 3⁄4 ✔ ✔ – ✔ – – ✔ ✔ –
2x1 ✔ ✔ ✔ ✔ ✔ – ✔ ✔ ✔
2 x 11⁄2 ✔ ✔ – ✔ ✔ ✔ ✔ ✔ –
2 ⁄2 x 1 ⁄2
1 1
– – – – – – ✔ – –
21⁄2 x 2 ✔ ✔ – – – – – – –
3x1 ✔ ✔ – ✔ ✔ – ✔ ✔ –
3 x 11⁄2 ✔ ✔ ✔ ✔ ✔ – ✔ ✔ ✔
3x2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
3 x 21⁄2 ✔ ✔ – ✔ – – – – –
4x2 ✔ ✔ – ✔ ✔ – ✔ ✔ –
4x3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
6x3 ✔ ✔ – ✔ ✔ – ✔ ✔ –
6x4 ✔ ✔ – ✔ ✔ – ✔ ✔ –
 19

BUTT WELD FITTINGS

Seamless Butt Weld Fittings ASTM A403, 304L

NPS/NB 90° LR ELBOWS 45° LR ELBOWS STUB EQUAL TEES END CAPS
(in) ENDS

SCH SCH SCH SCH SCH SCH SCH SCH SCH SCH SCH
10S 40S 80S 10S 40S 10S 10S 40S 80S 10S 40S

⁄2
1
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
⁄4
3
– ✔ ✔ – ✔ – – ✔ – – ✔
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ – ✔ ✔
11⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 – ✔ – – – – ✔ – – ✔ ✔
3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ – ✔ ✔
4 ✔ ✔ – ✔ ✔ ✔ ✔ ✔ – ✔ ✔
6 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ – ✔ ✔
8 ✔ – – – – ✔ – – – ✔ ✔

Seamless Butt Weld Fittings ASTM A403, 304L

NPS/NB CON RED ECC RED RED TEE

(in)
SCH SCH SCH SCH SCH SCH SCH SCH
10S 40S 80S 10S 40S 10S 40S 80S
1 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 x 3⁄4 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
1 ⁄4 x 1
1
✔ ✔ – ✔ – – – –
11⁄2 x 1⁄2 ✔ ✔ – – – – – –
11⁄2 x 1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ –
2 x 3⁄4 – – – – – – – ✔
2x1 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
2 x 11⁄2 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
2 ⁄2 x 2
1
✔ ✔ – ✔ ✔ – – –
3 x 11⁄2 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
3x2 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
3 x 21⁄2 ✔ – – – – – – –
4x2 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
4x3 ✔ ✔ – ✔ ✔ ✔ – ✔
6x3 ✔ ✔ – ✔ ✔ ✔ ✔ –
6x4 ✔ ✔ – ✔ ✔ ✔ ✔ –
20

BUTT WELD FITTINGS

Welded Butt Weld Fittings ASTM A403, 304L, 316L

NPS/NB CON RED ECC RED RED TEES

(in)
SCH SCH SCH SCH SCH SCH
10S 40S 10S 40S 10S 40S
3
⁄4 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔
1 x 1⁄2 ✔ ✔ ✔ ✔ ✔ ✔
1 x 3⁄4 ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 x 1⁄2 ✔ ✔ – – ✔ ✔
11⁄2 x 3⁄4 ✔ ✔ – – ✔ ✔
11⁄2 x 1 ✔ ✔ ✔ ✔ ✔ ✔
2 x 1⁄2 ✔ ✔ – – ✔ ✔
2 x 3⁄4 ✔ ✔ – – ✔ ✔
2 x1 ✔ ✔ ✔ ✔ ✔ ✔
2 x 11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 x 2 ✔ – ✔ ✔ ✔ ✔
3x1 ✔ ✔ – – ✔ ✔
3 x 11⁄2 ✔ ✔ ✔ ✔ ✔ –
3x2 ✔ ✔ ✔ ✔ ✔ ✔
3 x 21⁄2 ✔ ✔ ✔ ✔ ✔ –
4x2 ✔ ✔ ✔ ✔ ✔ ✔
4 x 21⁄2 ✔ – ✔ – ✔ ✔
4x3 ✔ ✔ ✔ ✔ ✔ ✔
5x4 ✔ ✔ – – – –
6x3 ✔ ✔ ✔ ✔ ✔ ✔
6x4 ✔ ✔ ✔ ✔ ✔ ✔
8x4 ✔ ✔ – – – –
8x6 ✔ ✔ ✔ – – –
10 x 6 ✔ ✔ ✔ – – –
10 x 8 ✔ – ✔ – – –
12 x 8 ✔ ✔ ✔ – – –
12 x 10 ✔ ✔ ✔ – – –

Welded Butt Weld Fittings ASTM A403, 304L, 316L

NPS/NB 90° LR ELBOWS 45° LR ELBOWS EQUAL TEES STUB

(in) ENDS
SCH SCH SCH SCH SCH SCH SCH
10S 40S 10S 40S 10S 40S 10S
1
⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
3
⁄4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 ⁄4
1
✔ ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 ✔ ✔ ✔ ✔ ✔ ✔ ✔
3 ✔ ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ ✔ ✔
6 ✔ ✔ ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔ – ✔ ✔ ✔
10 ✔ – ✔ – ✔ ✔ ✔
12 ✔ – ✔ – ✔ ✔ ✔
 21

FLANGES

Flanges ASTM A182, ANSI B16.5

Type 304L Type 316L

NPS/NB 150lb 150lb 300lb ATSM A182/ANSI B16.5
(in) RFWN RFWN RFWN Produced with dimensions to ANSI
304L 316L 316L
B16.5 from forgings to ASTM A182.
SCH SCH SCH SCH SCH SCH
10S 40S 10S 40S 10S 40S
⁄2
1
– ✔ ✔ ✔ ✔ ✔
⁄4
3
✔ ✔ ✔ ✔ ✔ ✔
1 ✔ ✔ ✔ ✔ ✔ ✔
11⁄2 ✔ ✔ ✔ ✔ ✔ ✔
2 ✔ ✔ ✔ ✔ ✔ ✔
21⁄2 – – ✔ ✔ – –
3 ✔ ✔ ✔ ✔ ✔ ✔
4 ✔ ✔ ✔ ✔ ✔ ✔
6 ✔ ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔ ✔ – –
10 ✔ ✔ ✔ ✔ – –
12 ✔ ✔ ✔ ✔ – –

Flanges ASTM A182, ANSI B16.5 Type 304L & 316L

NPS/NB 150lb RFSO 300lb RFSO 150lb RFB 300lb RFB

(in) 304L 316L 304L 316L 304L 316L 304L 316L
⁄2 1
✔ ✔ – ✔ ✔ ✔ – ✔
⁄4 3
✔ ✔ – ✔ ✔ ✔ – ✔
1 ✔ ✔ – ✔ ✔ ✔ ✔ ✔
11⁄2 ✔ ✔ – ✔ ✔ ✔ – ✔
2 ✔ ✔ ✔ ✔ ✔ ✔ – ✔
21⁄2 ✔ ✔ – – ✔ ✔ – –
3 ✔ ✔ ✔ ✔ ✔ ✔ – ✔
4 ✔ ✔ – ✔ ✔ ✔ – ✔
6 ✔ ✔ – – ✔ ✔ – ✔
8 ✔ ✔ – – ✔ ✔ – ✔
10 ✔ ✔ – – ✔ ✔ – ✔
12 ✔ ✔ – – ✔ ✔ – ✔

Flanges BS4504 – 1989

304L 316L 316L BS4504

(in) PN16/101 RF Slip On PN16/101 RF Slip On PN16/105 RF Blind This older standard is still commonly
1
⁄2 ✔ ✔ ✔ used as it allows manufacture from
3
⁄4 – ✔ ✔
bar rather than forgings or plate
1 ✔ ✔ ✔
11⁄4 – ✔ –
11⁄2 ✔ ✔ ✔
2 ✔ ✔ ✔
21⁄2 ✔ ✔ ✔
3 ✔ ✔ ✔
4 ✔ ✔ ✔
6 ✔ ✔ ✔
8 ✔ ✔ –
10 – ✔ –
22

FLANGES

‘Plate’ or ‘Table’ Flanges BS10 Table E 316L

(in) Blind Slip On BS10 Table E 316L

Standard BS10 Flanges
1
⁄2 – ✔ Produced to BS10 drilled to suit
Blind
3
⁄4 – ✔ nominal bore pipe sizes or O/D tube D
✔ ✔ E E
1 sizes. These are not produced from
11⁄2 ✔ ✔ forgings and are not pressure rated. T
2 ✔ ✔ They are available in Grades 304, P
21⁄2 ✔ ✔
304L, 316, 316L and 321 in sizes Slip-on
3 ✔ ✔ 1 D
4 ✔ ✔ ⁄2” NB to 6” NB. Larger sizes up to
E B E
6 ✔ ✔ 24” NB can also be supplied.
T
8 – ✔
P

Flanges – General Information

A Flange is a method of connecting pipes, valves, pumps and other
equipment to form a pipework system. It also provides easy access for
cleaning, inspection or modification. Flanges are usually welded or
screwed into such systems and then joined with bolts.

Flange Types
Weld Neck
This flange is circumferentially welded into the system at its neck which means
that the integrity of the butt welded area can be easily examined by radiography.
The bores of both pipe and flange match, which reduces turbulence and erosion
inside the pipeline. The weld neck is therefore favoured in critical applications
Slip-on
This flange is slipped over the pipe and then fillet welded. Slip-on flanges are
easy to use in fabricated applications.
Blind
This flange is used to blank off pipelines, valves and pumps, it can also be used
as an inspection cover. It is sometimes referred to as a blanking flange.
Socket Weld
This flange is counter bored to accept the pipe before being fillet welded.
The bore of the pipe and flange are both the same therefore giving good flow
characteristics.
Threaded
This flange is referred to as either threaded or screwed. It is used to connect
other threaded components in low pressure, non-critical applications.
No welding is required.
Lap Joint
These flanges are always used with either a stub end or taft which is butt welded
to the pipe with the flange loose behind it. This means the stub end or taft
always makes the face. The lap joint is favoured in low pressure applications
because it is easily assembled and aligned. To reduce cost these flanges can be
supplied without a hub and/or in treated, coated carbon steel.
Ring Type Joint
This is a method of ensuring leak proof flange connection at high pressures.
A metal ring is compressed into a hexagonal groove on the face of the flange to
make the seal. This jointing method can be employed on Weld Neck, Slip-on and
Blind Flanges.
 23

SEAMLESS TUBE

Seamless Tube ASTM A269, Type 316L

O/D Wall O/D Wall O/D Wall

(in) (swg) (in) (in) (swg) (in) (in) (swg) (in)

1
/8 24 7
/16 20 1 18
1
/8 22 1
/2 22 1 16
1
/8 20 1
/2 20 1 14
3
/16 24 1
/2 18 1 12
3
/16 22 1
/2 16 1 10
3
/16 20 1
/2 14 1 /4
1
16
3
/16 18 1
/2 1
/8 11/4 14
1
/4 22 5
/8 20 1 /4
1 1
/8
1
/4 20 5
/8 18 1 /2
1
16
1
/4 18 5
/8 16 11/2 1
/8
1
/4 16 5
/8 14 1 /4
3
16
5
/16 22 5
/8 1
/8 13/4 1
/8
5
/16 20 3
/4 20 2 1
/8
5
/16 18 3
/4 18 2 1
/4
5
/16 16 3
/4 16 21/2 16
3
/8 22 3
/4 14 21/2 1
/4
3
/8 20 3
/4 12 3 16
3
/8 16 3
/4 1
/8 3 10
3
/8 14 7
/8 16 3 1
/4
3
/8 1
/8 1 20 4 1
/4

O/D Wall O/D Wall O/D Wall

(mm) (mm) (mm) (mm) (mm) (mm)

6 0.5 14 1.5 25 1.5

6 1.0 14 2.0 25 2.0
6 1.5 15 1.0 25 2.5
8 1.0 15 1.5 25 3.0
8 1.5 15 2.0 30 1.5
10 1.0 16 1.5 30 2.0
10 1.5 16 2.0 30 3.0
10 2.0 18 1.5 38 3.0
12 1.0 20 1.5 38 4.0
12 1.5 20 2.0
12 2.0 22 1.5
24

SEAMLESS TUBE

Seamless Tube ASTM A269 Type 304L

O/D Wall O/D Wall O/D Wall

(mm) (mm) (in) (swg) (in) (swg)

6 1.0 1
/8 24 5
/8 20
8 1.0 3
/16 22 5
/8 18
10 1.0 1
/4 20 5
/8 16
10 2.0 1
/4 18 3
/4 20
12 1.0 1
/4 16 3
/4 18
15 1.0 5
/16 20 3
/4 16
15 1.5 3
/8 20 7
/8 18
15 2.0 3
/8 18 1 18
18 1.5 3
/8 16 1 /41
18
25 1.5 1
/2 18 2 16
50 2.0 1
/2 16

Standard Tolerances for welded and seamless cold finished tube (ASTM A 450/A 450M)

Variations in OD1 Variation in tmin2

Outside Diameter Ovality3
(OD) (Thin wall tube only)
Under Over Under Over
in mm in mm in mm % % in m
4 4
<1 <25.4 0.004 0.1 0.004 0.1 0 20 0.020 0.5
4 4
1 25.4 0.006 0.15 0.006 0.1 0 20 0.020 0.5
4 4
>1 to >25.4 to 0.006 0.15 0.006 0.15 0 20 0.020 0.5
11/2 38.1
4 4
>11/2 to >38.1 to 0.008 0.2 0.008 0.2 0 22 0.020 0.5
<2 <50.8
2 50.8 0.008 0.2 0.008 0.2 0 22 2.0% of OD
>2 to >50.8 to 0.010 0.25 0.010 0.25 0 22 2.0% of OD
21/2 63.5
>21/2 to >63.5 to 0.012 0.3 0.012 0.3 0 22 2.0% of OD
3 76.2
>3 to >76.2 to 0.015 0.38 0.015 0.38 0 22 2.0% of OD
4 101.6

Notes
1 Includes ovality tolerance except for thin wall tube
2 tmin = minimum wall thickness
3 Ovality = Difference between maximum and minimum OD
Thin wall tube is defined as that with a wall thickness
t≤0.020 in (0.5 mm) for any OD,
or t≤2% of OD if OD ≤2 in (50.8 mm),
or t≤3% of OD if OD >2 in (50.8 mm)
4 Or 2.0% of OD, if this gives a larger tolerance value.
 25

HYGIENIC TUBE & FITTINGS

Hygienic Tube If smaller sizes are required, Aalco • S.M.S. (Swedish Metric System):
swg sizes shown are stocked in offer a range of cold drawn A Scandinavian fitting used when
grades 304/L and 316/L in descaled seamless tubes with a hygienic bore. tubes require minimal dismantling.
and BA finish and with a polished For larger sizes, Aalco offer welded
• DIN 11851: Popular throughout
O/D. mm sizes available in 316L as tubes produced to DIN 2463. Aalco Europe, these can be offered in
welded, unannealed in both descaled can also supply Pharmaceutical sizes compatible with metric and
finish and with a polished O/D. Quality tubing to ASME BPE 1997 imperial tubes.
with a highly polished internal
surface finish of <20 Ra and O.D. • DN: Danish Fittings.
ASTM A270 DIN 11850
O/D Wall O/D Wall surface finish of <30 Ra. • S.R.J.T.: A modified RJT, normally
(in) (swg) (in) (mm) used with larger tubes.
To complement the hygienic tubes,
/4
3
16 Aalco supply a range of welding • Clamp: Popular in the U.S. and
1 16 1 1.5 fittings to BS4825, in grade 316 increasingly so in Europe, the
11/2 16 11/2 1.5 stainless steel. The fittings are clamp union offers a rapid, yet
2 16 2 1.5 supplied with a similar finish to the leak-free method of assembling
21/2 16 21/2 1.5 tubes with which they are intended and disassembling tubes without
3 16 3 1.5 to mate. The range includes: the use of a tool.
4 16 4 2.0 • 90 & 45 degree elbows All unions except for a clamp union
4 14 (1800 available upon request) comprise four parts: a nut, male,
liner and seal. Clamp unions
‘Hygienic’ (also sometimes called • Concentric & eccentric reducers
comprise 2 ferrules, a clamp and a
‘Sanitary’) Tubes and Fittings are • Equal, pulled, reducing & swept seal. Blanks are available to suit
used in environments that require a tees union parts if there is a requirement
clean and sanitary flow of fluids. to close off a pipeline.
Applications include food & drinks • Y-pieces and sprayballs.
processing, breweries, dairies and To complement the range of
Aalco also offer a range of Unions
pharmaceutical, medical & biotech hygienic tube and fittings, Aalco
with which to connect the various
plant. All tubes are produced to also supply a range of tube-fixings
tubes together. The most popular
ASTM A270 in stainless steel grades with which to support pipe systems,
types supplied include:
304 and 316, and are usually a range of flanges for connecting
• R.J.T. (Ring Joint Type): A sanitary tubes if sterility is less critical, and
supplied in the annealed condition.
fitting, produced to BS 4825 a broad variety of actuated and
Aalco offer three different external
Part 5, primarily used where manual valves and plugcocks.
surface finishes on the tubes:
tubes are frequently disassembled Fabrication facilities are available
Descaled, Dull Polished and Semi-
for cleaning. to provide customers with non-
Bright Polished. Bright Polished
standard and bespoke items.
can also be supplied if required. • I.D.F. (International Dairy
Internally, tubes are bead rolled and Federation): Produced to ISO 2853
free from crevices and bug traps to and BS4825 Part 4. A crevice-free
eliminate contamination and fitting used where pipelines
facilitate easy cleaning. remain permanently in place.

Hygienic Fittings Type 304L and 316L Sizes 1” to 4”

RJT & DIN Hexagon Nuts IDF Weld Liners Equal Tee Polished
RJT & DIN Weld Liners IDF Weld Males Equal Tee Descaled
RJT & DIN Weld Males IDF Joint Rings Pulled Tee Polished
RJT & DIN Joint Rings IDF Weld Unions Pulled Tee Descaled
RJT & DIN Weld Unions ISO 90º Bends Polished Pulled Red. Tee Polished
RJT & DIN Blank Caps ISO 45º Bends Polished Pulled Red. Tee Descaled
RJT Hose Liners ISO 90º Bends Descaled Hinged Piped Clips
RJT Blank Nut and Chain ISO 45º Bends Descaled
IDF Hex Nuts Bends are available in long and short type
26

HIGH PURITY TUBE & FITTINGS

High Purity tube and fittings are All items are in type 316L only and EGMO Limited is well established as
used in applications where non- have been polished to give a high a leading international manufacturer
contamination and absolute quality, low roughness surface finish. of high purity fittings for use in
cleanliness is essential. This includes critical applications.
Aalco and the Amari group are sole
pharmaceutical production,
UK & Ireland distributors for the
biotechnology and medical &
EGMO range of high purity
scientific laboratories as well as food
products.
& drink processing.

Surface Finish

BPE Surface Surface ID or Product Contact Surfaces OD or Product

Finish Designation Finish Code Max. Surface Roughness* Mechanical Polish & Electropolishing where indicated Noncontact Surface

SFF1 PC 20 Mechanical Polished Unpolished

SFF4 PD 15 Mechanical Polished & Electropolished Unpolished

SFF1 PL 20 Mechanical Polished Mechanical Polished to 32 Ra

SFF4 PM 15 Mechanical Polished & Electropolished Mechanical Polished to 32 Ra

PR 10 Mechanical Polished & Electropolished Mechanical Polished to 32 Ra

*Numbers are in RA micro inches. To convert to R.M.S. finish multiply the RA numbers times 1.11 to get the equivalent R.M.S. number.

Tubing Dimensional Tolerances – Tubing specifications, ASTM and Amari

OD dimensional
Length Wall
Gauge specification
Tubing
(wall
Diameter ASTM Amari ASTM ASTM Amari
thickness)
Spec. Typical Spec. Spec. Typical
1
/2” 16g +.002/-.008 +.001/-.004 -0 +/1/8 +/-10% +0/-3%
(.065” wall)
3
/4” 16g +.002/-.008 +.001/-.004 -0 +/1/8 +/-10% +0/-3%
(.065” wall)
1” 16g +.002/-.008 +.001/-.004 -0 +/1/8 +/-10% +0/-3%
(.065” wall)
Standards:
11/2” 16g +.002/-.008 +.001/-.006 -0 +/1/8 +/-10% +0/-3% ASTM A-270 316L
(.065” wall) ASME B46.1 Surface Texture
2” 16g +.002/-.011 +.001/-.007 -0 +/1/8 +/-10% +0/-3% ASME BPE – 2002
(.065” wall)
21/2” 16g +.002/-.011 +.001/-.008 -0 +/1/8 +/-10% +0/-3%
(.065” wall) Typical Amari Standard ID
Polish will result in a surface
3” 16g +.003/-.012 +.001/-.009 -0 +/1/8 +/-10% +0/-3% finish of <20 Ra and OD Polish
(.065” wall) will result in a surface finish of
4” 14g +.003/-.015 +.002/-.010 -0 +/1/8 +/-10% +0/-3% <30 Ra, as laid down by ASME
(.083” wall) BPE Table SF-2 – SFT1.
 27

HIGH PURITY TUBE & FITTINGS

EGMO bio-pharm fittings are Only bright annealed sanitary

fabricated from stainless steel 316L tubes are used, meeting ASTM
(1.4404) for sulphur corrosion A-270/ASTM A-269 requirements
resistance, and for carbide- for minimal ovality. Fractional fittings
precipitates-free welds. To ensure are produced from cold drawn Concentric Reducer

smooth automatic welding, weld-on bright annealed seamless material.

fittings are produced from special
316L, specified with a controlled
sulphur content of 0.005<S<0.017.
90º Bend

High Purity Fittings

Tolerances

Nominal OD Size 1
/2” /4”
3
1” 11/2” 2” 21/2” 3” 4” 6”
45º Bend
OD Tolerance ±.005 ±.005 ±.005 ±.008 ±.008 ±.010 ±.010 ±.015 ±.030
Nominal Wall
Thickness .065 .065 .065 .065 .065 .066 .065 .083 .109
Wall Thickness
Tolerance before EP +.005-.008 +.005-.008 +.005-.008 +.005-.008 +.005-.008 +.005-.008 +.005-.008 +.008-.010 +.015-.015
Blank Cap
Wall Thickness
Tolerance after EP +.005-.010 +.005-.010 +.005-.010 +.005-.010 +.005-.010 +.005-.010 +.005-.010 +.008-.012 +.015-.017
Control Portion
Length .750 .750 .750 .750 .750 .750 .750 .750 .750
Tangent Length 1.500 1.500 1.500 1.500 1.760 1.760 1.760 2.000 2.500
Squareness Face
to Tangent .005 .005 .008 .008 .008 .010 .016 .016 .030
Off Angle .014 .018 .025 .034 .043 .054 .068 .086 .135
Off Plane ±.030 ±.030 ±.030 ±.050 ±.050 ±.050 ±.050 ±.060 ±.060 Eccentric Reducers

Product Sizes Material Finish

BioPharm fittings are BioPharm fittings are All fittings are A variety of
produced to ASME BPE available in sizes 1/2” fabricated in 316L surface finishes
– 1997 specifications. through 6”. Stainless Steel for are available.
superior corrosion
resistance and low
carbide precipitation
at welds. Tee
28

SCREWED FITTINGS

These are available in Grade 316 Low Pressure High Pressure

in the size range 1/8” NB to 4” NB 150lb standard screwed fittings are 2000lb, 3000lb, 6000lb screwed
in two classifications: manufactured to BS1740 with BSP fittings are manufactured to BS3799
thread, male ends tapered and with dimensions to ANSI B16.11
female ends parallel. (except unions) from forgings
conforming to ASTM A182.
The standard thread is NPT.

90° Elbow Equal Tee Union 45° Elbow

Half Socket Socket Round Nut Reducing Socket

Hexagon Nipple Reducing Nipple Equal Nipple Cap

Barrel Nipple Welding Nipple Square Head Plug Hexagon Head Plug

Round Head Plug Reducing Bush Hexagon Nut Cross

 29

SOCKET WELD FITTINGS

These are available in Grade 316 They are manufactured to BS3799

in the size range 1/8” NB to 4” NB with dimensions to ANSI B16.11
with pressure ratings 3000lb, (except unions) from forgings
6000lb and 9000lb. conforming to ASTM A182.

90° Elbow 45° Elbow Cross

Full Coupling Reduced Coupling Half Coupling

Equal Tee Union Cap

30

STRUCTURAL AND DECORATIVE TUBE

Round 304 Welded Mirror Polished

O/D Wall Weight per O/D Wall Weight per O/D Wall Weight per
(in) (mm) (mm) metre (kg) (in) (mm) (mm) metre (kg) (in) (mm) (mm) metre (kg)

1
⁄2 1.50 0.42 1 2.00 1.17 40 3.00 2.79
15 1.50 0.51 28 1.50 1.00 13⁄4 1.50 1.62
5
⁄8 1.20 0.44 11⁄8 1.50 1.02 50 2.50 2.99
5
⁄8 1.50 0.54 30 1.20 0.86 50 3.00 3.54
3
⁄4 1.20 0.53 1 ⁄4
1
1.20 0.92 2 1.20 1.49
3
⁄4 1.50 0.66 11⁄4 1.50 1.13 2 1.50 1.85
7
⁄8 1.20 0.63 32 2.00 1.51 2 2.00 2.40
7
⁄8 1.50 0.78 13⁄8 1.20 1.02 2 3.00 7.43
7
⁄8 2.00 1.01 38 2.00 1.81 60.3 2.50 3.59
25 1.50 0.88 38 3.00 2.64 21⁄2 1.50 2.34
25 2.00 1.15 11⁄2 1.20 1.11 3 1.50 2.81
25 3.00 1.66 11⁄2 1.50 1.38 75 3.00 5.69
1 1.20 0.73 1 ⁄2
1
2.00 1.81 100 3.00 7.41
1 1.50 0.90

Round 316 Welded Mirror Polished

O/D Wall Weight per O/D Wall Weight per O/D Wall Weight per
(in) (mm) metre (kg) (in) (mm) (mm) metre (kg) (in) (mm) (mm) metre (kg)

1
⁄2 1.50 0.42 1 1.50 0.90 2 2.00 2.40
5
⁄8 1.20 0.44 1 2.00 1.17 2 3.00 7.43
5
⁄8 1.50 0.54 11⁄4 1.50 1.13 60.3 2.50 3.59
3
⁄4 1.20 0.53 1 ⁄2
1
1.50 1.38 2 ⁄2
1
1.50 2.34
3
⁄4 1.50 0.66 11⁄2 3.00 2.64 3 1.50 2.81
7
⁄8 1.20 0.63 50 2.5 2.99 3 3.00 5.52
7
⁄8 1.50 0.78 50 3.0 3.55 4 3.00 7.42
1 1.20 0.73 2 1.50 1.85

Type 304 and 316 Handrail section, welded, unannealed, dull polished

O/D Wall Weight per

(in) (mm) metre (kg)

42.40 x 2.5 2.49

48.30 x 2.5 2.86
60.30 x 2.5 3.61
 31

STRUCTURAL AND DECORATIVE TUBE

Square 304 Welded Dull Polished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

12.7 x 12.7 1.50 0.55 30 x 30 3.00 2.72 70 x 70 3.00 6.53

15 x 15 1.20 0.53 38 x 38 1.50 1.75 70 x 70 4.00 8.45
15 x 15 1.50 0.65 38 x 38 2.00 2.31 70 x 70 5.00 10.6
20 x 20 1.20 0.71 38 x 38 3.00 3.51 80 x 80 2.00 4.98
20 x 20 1.50 0.88 40 x 40 1.20 1.49 80 x 80 3.00 7.53
20 x 20 2.00 1.19 40 x 40 1.50 1.85 80 x 80 4.00 9.81
25 x 25 1.20 0.92 40 x 40 2.00 2.45 80 x 80 5.00 12.3
25 x 25 1.50 1.14 40 x 40 3.00 3.75 100 x 100 2.00 6.40
25 x 25 2.00 1.49 50 x 50 1.50 2.32 100 x 100 3.00 9.53
25 x 25 3.00 2.20 50 x 50 2.00 3.08 100 x 100 5.00 15.30
30 x 30 1.20 1.10 50 x 50 3.00 4.65 120 x 120 3.00 11.8
30 x 30 1.50 1.37 60 x 60 2.00 3.71 150 x 150 5.00 23.0
30 x 30 2.00 1.84 60 x 60 3.00 5.49

Square 304 Welded Unpolished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

40 x 40 4.00 4.80 100 x 100 4.00 12.4 150 x 150 4.00 18.6
50 x 50 4.00 5.96 100 x 100 5.00 15.3 150 x 150 5.00 23.0
50 x 50 5.00 7.41 100 x 100 6.00 17.5 150 x 150 6.00 31.2
60 x 60 5.00 8.90 120 x 120 5.00 18.0
80 x 80 4.00 9.81 120 x 120 10.0 36.0

Square 316 Welded Dull Polished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

20 x 20 1.50 0.88 30 x 30 3.00 2.72 60 x 60 3.00 5.49

20 x 20 2.00 1.19 40 x 40 1.50 1.85 80 x 80 2.00 4.98
25 x 25 1.20 0.92 40 x 40 2.00 2.45 80 x 80 3.00 7.53
25 x 25 1.50 1.14 40 x 40 3.00 3.75 100 x 100 3.00 9.53
25 x 25 2.00 1.45 50 x 50 1.50 2.30 100 x 100 5.00 15.30
30 x 30 1.50 1.35 50 x 50 2.00 3.08
30 x 30 2.00 1.84 50 x 50 3.00 4.65
32

STRUCTURAL AND DECORATIVE TUBE

Square 316 Welded Unpolished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

30 x 30 3.00 2.72 50 x 50 4.00 5.96 100 x 100 3.00 9.53

40 x 40 3.00 3.75 60 x 60 3.00 5.49 100 x 100 5.00 15.30
50 x 50 3.00 4.65 80 x 80 3.00 7.53

Square 430 Welded Dull Polished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

25 x 25 1.20 0.92 30 x 30 1.50 1.37 32 x 32 1.50 1.47

25 x 25 1.50 1.14 32 x 32 1.20 1.20 40 x 40 1.50 1.85
30 x 30 1.20 1.10

Rectangular 304 Welded Dull Polished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

20 x 10 1.50 0.44 50 x 30 2.00 2.40 80 x 60 2.00 4.38

30 x 10 1.20 0.71 50 x 30 3.00 3.61 80 x 60 3.00 6.53
30 x 15 1.50 0.76 50 x 40 3.00 4.08 100 x 40 1.50 3.29
30 x 20 1.50 1.14 60 x 20 1.50 1.85 100 x 40 3.00 6.53
40 x 15 1.50 1.25 60 x 30 1.50 2.09 100 x 50 2.00 4.68
40 x 20 1.20 1.10 60 x 30 2.00 2.80 100 x 50 3.00 6.95
40 x 20 1.50 1.37 60 x 30 3.00 4.13 100 x 60 3.00 7.53
40 x 20 2.00 1.84 60 x 40 1.50 2.32 120 x 40 3.00 7.43
50 x 25 1.20 1.41 60 x 40 2.00 3.08 120 x 60 3.00 8.12
50 x 25 1.50 1.75 60 x 40 3.00 4.65 120 x 80 3.00 9.53
50 x 25 2.00 2.31 80 x 40 1.50 2.80 150 x 100 5.00 18.80
50 x 25 3.00 3.75 80 x 40 2.00 3.71
50 x 30 1.50 1.85 80 x 40 3.00 5.49
 33

STRUCTURAL AND DECORATIVE TUBE

Rectangular 304 Welded Unpolished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

100 x 50 3.00 6.95 120 x 60 4.00 10.6 150 x 100 5.00 18.8
100 x 50 4.00 9.09 120 x 60 5.00 13.0 150 x 100 6.00 22.6
100 x 50 5.00 11.3 120 x 80 3.00 9.34 200 x 100 3.00 11.1
100 x 60 4.00 9.81 120 x 80 4.00 12.4 200 x 100 4.00 18.5
100 x 60 5.00 12.3 120 x 80 5.00 15.3 200 x 100 5.00 22.6
100 x 80 4.00 11.0 150 x 50 3.00 9.53 200 x 100 6.00 27.1
120 x 40 2.00 5.00 150 x 80 3.00 10.7 200 x 100 8.00 34.3
120 x 40 3.00 7.43 150 x 80 5.00 17.4 250 x 150 8.00 47.1
120 x 60 3.00 8.24 150 x 100 4.00 15.4

Rectangular 316 Welded Dull Polished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

30 x 15 1.50 0.76 60 x 30 1.50 2.12 100 x 50 2.00 4.61

40 x 20 1.50 1.35 60 x 40 2.00 3.08 100 x 50 3.00 6.83
40 x 20 2.00 1.84 80 x 40 2.00 4.98 120 x 80 3.00 9.53
50 x 25 1.50 1.75 80 x 40 3.00 5.49 120 x 80 4.00 12.4
50 x 30 2.00 2.45

Rectangular 316 Welded Unpolished

Dimensions Wall Weight per Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg) (mm) (mm) metre (kg)

60 x 40 2.00 3.08 100 x 60 2.00 4.98 120 x 80 4.00 12.4

60 x 40 3.00 4.65 100 x 60 4.00 9.81 150 x 100 6.00 22.6
60 x 40 4.00 5.60 120 x 80 3.00 9.53 160 x 80 3.00 11.1
100 x 50 4.00 9.09
34

There are five classes of stainless Specifying finishes for

steel: Martensitic, Ferritic, Austenitic, stainless steel flat
Duplex and Precipitation Hardening. products (sheet and plate)
Martensitic types may be
strengthened and hardened by heat Introduction
treatment, but the Ferritic steels, Surface finishes for stainless steel
which in general have lower carbon sheet (coil, strip) and plates, are
and higher Chromium contents, do specified in EN 10088-2:1995.
not respond in this way. 'Stainless steels – Technical delivery
conditions for sheet/plate and strip EN 10088-2 surface finishes
Ferritic stainless steels contain
for general purposes.’ Table 6 of EN 10088-2 defines
chromium usually in the range
finishes for both
11 to 18%. They are magnetic, The standard identifies both ‘ex-mill’
have moderate corrosion resistance hot and cold rolled finishes and Ex-mill Hot Rolled Finishes (1)
and are not susceptible to stress ‘special finishes’, as value added
corrosion. Austenitic stainless steels finishes to achieve specific aesthetic Ex-mill Cold Rolled Finishes (2)
contain nickel as well as chromium, effects. ‘Special Finishes’
and are sometimes referred to by
Most of the finishes available have The definitions of surface finish do
the generic title 18/8, i.e. 18%
a surface that provides a high not attempt to express surface finish
chromium, 8% nickel, although the
standard of corrosion resistance, up in terms of the surface topography
actual composition may vary widely
to the limit of the compositional achieved in terms of Ra values.
from these figures. They are non-
potential of the particular grade.
magnetic and cannot be hardened
The standard uses a coding system
by heat treatment, although they The coarser finishes may limit the based on the manufacturing
strain harden rapidly when cold corrosion resistance of the steel in process.
worked. severe applications, where the
particular grade is operating in A full definition is shown in the
All stainless steels except hardened
conditions close to the limit of its standard, with appropriate notes in
Martensitic steels are ductile and
corrosion resistance. terms of:
therefore can be formed, but the
Austenitic types are outstanding in In numeric or quantitative terms this Type of process route
this respect. They are also amongst is very difficult to define and is often
the most highly corrosion-resistant Surface finish
a matter of judgement.
materials available to the designer To precisely define a ‘special finish’
and engineer. Duplex stainless steels for a particular application where a
combine the optimum properties specific aesthetic texture or
of austenitic and ferritic types. appearance is required usually
They contain 18 - 26% chromium involves close consultation with
plus 4.5 to 6.5% nickel and have specialist finishers, as surface
good resistance to stress corrosion characteristics can vary.
cracking. Precipitation hardening
stainless steels may be martensitic, Once the grade of finishing grit has
semi-austenitic or austenitic. been defined, the final acceptance
They combine the heat treatability of special finishes is often done by
of normal martensitic grades using reference 'swatch' samples.
with the corrosion resistance of
austenitics. They are available in bar
form for the production of heavy
duty engineering components.
 35

Ex-mill hot rolled finishes

Finishing Process Route Notes Market Terms

1D Hot rolled, heat treated, pickled Most common “hot rolled” finish available. Most corrosion resistant Softened and
hot rolled finish specified. descaled

1C. Hot rolled, heat treated, not descaled Surface covered with mill scale. Finished parts may be suitable for heat Not commonly
(oxidation) resisting applications as supplied, but should be descaled to used
optimise corrosion resistance.

1E Hot rolled, heat treated, mechanically Free of mill scale by shot blasting or grinding. This finish can also limit Not commonly
descaled the crevice corrosion resistance. used

Ex-mill cold rolled finishes

Finishing Process Route Notes Market Terms

2B Cold rolled, heat treated, pickled, Most common cold rolled finish available. Non-reflective, smooth finish,
skin passed good flatness control. Thickness range limited by manufactures' skin passing 2B
rolling capacity.

2D Cold rolled, heat treated, pickled Thicker sheet size ranges. Smoothness not as good as 2B, but adequate 2D
for most purposes.

2R Cold rolled, bright annealed (BA) Highly reflective 'mirror' finish, very smooth. Often supplied with plastic
coatings for pressings. Manufactured items usually put into service without BA
further finishing.

2H Cold rolled, work hardened 'Temper' rolling on austenitic types improves mechanical strength. Not commonly
Smoothness similar to 2B. used

2Q Cold rolled, hardened and tempered, Only available on martensitic types (eg 420). Scaling avoided by protective Not commonly
scale free atmosphere heat treatment or descaling after heat treatment. used

Aalco finishes

Product Name of Finish

Sheet, Plate, Tube Dull polished, 180 grit

Sheet, Plate, Tube Dull polished, 240 grit

Sheet and Tube Polished, 320 grit

Sheet and Tube ‘Optisheen’ polish, Satin polish plus variants

Sheet and Tube Bright polish

Sheet and Tube Mirror polish

Note: Finishes can be subjective and agreement between Aalco and the customer is needed, often by using samples.
36

STAINLESS STEEL GRADES

EN BS AISI Obsolete Composition Guide Typical Mechanical Properties (Rolled Products)

En No.

C Cr Ni Mo Others Proof Strength Tensile Strength Elongation

0.2% Nmm2 Nmm2 %

1.4000 403S17 410S – 0.08x 12 . . . 220-250 400-600 19

1.4002 405S17 405 – 0.08x 12 . . 0.2 Al 210-250 400-600 17
1.4003 – – – 0.03x 11 0.5 . . 250-320 450-650 18-20
1.4016 430S17 430 60 0.08x 17 . . . 240-280 430-630 18-20
1.4113 434S17 434 – 0.08x 17 . 1 . 260-280 450-630 18
1.4509 – – – 0.015x 18 . . Nb, Ti
1.4510 – 430Ti – 0.05x 17 . . 0.6 Ti 230-240 420-600 23
1.4511 – 430Nb – 0.05x 17 . . 0.6Nb 230-240 420-600 23
1.4512 409S19 409 – 0.03x 11 . . 0.5 Ti 210-220 380-560 25
1.4521 – (444) – 0.025x 17 . 2 0.6 Ti
1.4006 410S21 410 56A .08-.15 12 . . . 400-450 550-850 12-20
1.4005 416S21 416 56AM .08-.15 12 . . .35xS 450 650-850 12
1.4021 420S29 420 56B .16-.25 12 . . . 450-550 650-950 10-15
1.4028 420S45 420 56D .26-.35 12 . . . 600 740-1000 10-15
1.4029 416S37 416 56CM .25-.32 12 . . .35xS
1.4057 431S29 431 57 .12-.22 15 2 . .
1.4104 416S29 416 56BM .10-.17 16 . 0.4 .35xS 500 650-850 10
1.4112 – 440B – .85-.95 17 . 1.0 0.1V 900 max 12
1.4125 – 440C – .95-1.2 17 . 0.6 . 900 max 12
1.4594 460S52 – – 0.7x 14 5 1.5 1.5Cu 700-1000 930-1270 10
1.4749 – 446 – .15-.20 26 . . 0.2N
1.4301 304S31 304 58E 0.07x 18 8 . . 210-260 520-750 45
1.4303 305S19 305 – 0.06x 18 11 . . 200-250 500-650 45
1.4305 303S31 303 58M 0.10x 18 8 . 0.35xS 190-230 500-700 35
1.4306 – 304L – 0.030x 18 10 . . 200-250 500-670 45
1.4307 304S11 304L – 0.030x 18 8 . . 200-250 500-670 45
1.4310 301S21 301 – 0.05/0.15 17 6 . . 250-280 600-950 40
1.4311 304S61 304LN – 0.030x 18 9 . 0.22xN 270-320 550-750 40
1.4372 – 201 – 0.15x 17 4.5 . 6.5Mn 330-380 750-950 40
1.4401 316S31 316 58J 0.07x 17 11 2 . 220-270 520-680 40
1.4404 316S11 316L – 0.030x 17 11 2 . 220-270 520-680 40
1.4406 316S61 316LN – 0.030x 17 11 2 0.22xN 280-330 580-780 40
1.4432 316S13 316L – 0.030x 17 11 2.5 . 220-270 520-700 40
1.4435 316S13 316L – 0.030x 17 13 2.5 . 220-270 520-700 40
1.4436 316S33 316 58J 0.05 17 11 2.5 . 220-270 500-730 40
1.4438 317S12 317L – 0.030x 18 13 3 . 220-270 520-720 35
1.4439 – – – 0.030x 17 13 4 0.22xN 270-320 580-780 35
1.4541 321S31 321 58B 0.08x 18 9 . 0.5Ti 200-250 500-720 40
1.4550 347S31 347 58F 0.08x 18 9 . 0.5Nb 200-250 500-720 40
1.4567 394S17 304Cu – 0.04x 18 9 . 4xCu
1.4571 320S31 (316Ti) – 0.08x 17 11 2 0.5Ti 220-270 520-690 40
1.4539 904S13 – – 0.020x 19 24 4 2xCu 220-270 520-730 35
1.4547 – – – 0.020x 20 18 6 1xCu 300-350 650-850 35
1.4529 – – – 0.020x 19 24 6 1.5xCu 300-340 650-850 40
1.4833 309S16 309 – 0.15x 22 12 . .
1.4841 – 314 – 0.20x 25 20 . 2.0Si
1.4845 310S24 310 – 0.10x 25 20 . .
1.4878 321S51 321H – 0.10x 18 9 . 0.6Ti
 37

SELECTION GUIDE

Type Description Typical Usage

Martensitic Stainless Steel: Magnetic. Moderate corrosion resistance. Non-formable, poor ductility. Poor weldability.
Hardenable by heat treatment. Generally a bar specification
410 12% chromium.
Pump and gas turbine parts,
416 Free machining form of 410. general engineering
Sulphur bearing. Available in bar form only.
420 Heat resistant. Knife blades, valves.
431 17% chromium. 21⁄ 2% nickel. Available in bar form only.
Ferritic Stainless Steel: Magnetic. Chromium steels. Immune to chloride stress corrosion cracking. Good formability and
ductility. Weldability reasonable in thin sections but poor in thicker sections. Moderate to good
corrosion resistance. Cannot be hardened by heat treatment. Used in the annealed condition.
Generally a rolled flat and tube product.
430 17% chromium. Sinks, decoration, automotive trim,
washing machine drums.
434 17% chromium, 1% molybdenum. Resistant to atmospheric Automotive trim – below the waist
and pitting corrosion. and wiper blades.
409 12% chromium plus titanium. Weldable up to 2.5mm thick. Automotive exhaust systems.
4003 Modified form of 409 weldable in heavy section. Structural, bulk handling chutes and
hoppers, bulk railway wagons,
transport, mining.
Austenitic Stainless Steel: Non magnetic. Chromium/Nickel steels. Easily fabricated and formed. Excellent weldability.
Excellent corrosion resistance. Cannot be hardened by heat treatment. Can be hardened by
cold working. Normally used in the annealed condition. Suitable at high and low temperatures.
Sheet, plate, bar and tube products.
301 17% chromium, 7% nickel. Structural, springs, wheel covers,
High work hardening rate. Formability. wear plates.
302 18% chromium, 9% nickel. Good formability. Similar to 304.
303 Free machining form of 302.
Available in bar form only.
304 18% chromium, 9% nickel. Good formability. Sinks, architecture, automotive exhausts,
cutlery, holloware and flatware,
water tubing.
304L Low carbon form of 304. Brewery, dairy, food and pharmaceutical
production plant.
304DDQ Deep drawing quality 304. Sinks, holloware.
305 18% chromium, 12% nickel. Good formability. Eyelets, spun parts.
309 23% chromium, 14% nickel. High oxidation resistance. Similar to 310.
310 25% chromium, 20% nickel. Furnaces, heat exchangers, metallurgical
Very high oxidation resistance. plant. Service temp. up to 1100°C.
316 17% chromium, 11% nickel, 2.5% molybdenum.
High corrosion resistance. Chemical and petrochemical process plant
architecture, brewery plant.
316L Low carbon form of 316.
316Ti 316 with addition of titanium to improve high-temperature Chemical and petrochemical process plant
properties and weldability.
317 Higher corrosion and creep resistance than 316.
Chemical and petrochemical process plant
317L Low carbon version of 317 for improved weldability.
321 18% chromium, 10% nickel plus titanium. Heating elements, aircraft parts, chemical
and petrochemical process plant.
325 Free machining form of 321.
Sulphur bearing. Available in bar form only.
347 18% chromium, 10% nickel plus niobium. Process plant, aircraft parts.
Resistant to sensitisation and hot concentrated nitric acid.

Influence of an alloy element on: C Cr Ni S Mn Si P Cu Mo Se Ti or Nb

Corrosion Resistance – ↑ ↑ ↓ – – ↑ – ↑ – –
Mechanical Properties ↑ ↑ – – ↑ ↑ ↑ ↑ ↑ – ↑
Resistance to High Temperature – ↑ ↑ ↓ – – – – ↑ – ↑
Machinability ↓ ↓ – ↑ – – ↑ – – ↑ –
Weldability ↓ ↓ – ↓ ↑ – ↓ – ↑ – ↑
Cold Workability ↓ ↓ ↑ ↓ – – – ↑ – – –

↑ Beneficial Detrimental ↓
BRANCHES
ABERDEEN HULL NOTTINGHAM
41 Castle Terrace Saxon Way Harrimans Lane
Aberdeen AB11 5EA Priory Park West Dunkirk
Tel: 01224 596611 Hessle Nottingham NG7 2SD
Fax: 01224 596622 Hull HU13 9PB Tel: 0115 988 2600
e-mail: [email protected] Tel: 01482 626262 Fax: 0115 988 2636
Fax: 01482 626263 e-mail: [email protected]
BELFAST e-mail: [email protected]
The Belfast Metal Centre SLOUGH
McKinney Industrial Estate LEEDS Unit 2, 552 Fairlie Road
54 Mallusk Road Unit 1, Revie Road off Elland Road Slough Trading Estate
Newtownabbey BT36 4PX Leeds LS11 8JG Slough
Tel: 02890 838838 Tel: 0113 276 3300 Berkshire SL1 4PY
Fax: 02890 837 837 Fax: 0113 276 0382 Tel: 01753 619900
e-mail: [email protected] e-mail: [email protected] Fax: 01753 512227
e-mail: [email protected]
BIRMINGHAM LIVERPOOL
Shelah Road 207 Great Howard Street SOUTHAMPTON
Halesowen Liverpool L5 9ZH Test Lane
West Midlands B63 3PH Tel: 0151 207 3551 Nursling
Tel: 0121 585 3600 Fax: 0151 207 2657 Southampton SO16 9TA
Fax: 0121 585 6864 e-mail: [email protected] Tel: 02380 875200
e-mail: [email protected] Fax: 02380 875275
MANCHESTER e-mail: [email protected]
CHEPSTOW Express Trading Estate
Avenue West Stone Hill Road STOKE
Newhouse Park Estate Farnworth Unit F, Forge Way
Chepstow Bolton BL4 9NN Brown Lees Industrial Est
Monmouthshire NP16 6UD Tel: 01204 863456 Biddulph
Tel: 01291 638 638 Fax: 01204 863430 Stoke-on-Trent ST8 7DN
Fax: 01291 638 600 e-mail: [email protected] Tel: 01782 375700
e-mail: [email protected] Fax: 01782 375701
NEWCASTLE e-mail: [email protected]
DYFED First Avenue
Units 3-4 Team Valley Trading Estate SWANLEY
Capel Hendre Industrial Estate Gateshead Units 6 & 7
Ammanford Tyne & Wear NE11 0NU Pedham Place Industrial Estate
Carmarthenshire SA18 3SJ Tel: 0191 491 1133 Wested Lane
Tel: 01269 842044 Fax: 0191 491 1177 Swanley
Fax: 01269 845276 e-mail: [email protected] Kent BR8 8TE
e-mail: [email protected] Tel: 01322 610900
NORWICH Fax: 01322 610910
GLASGOW Roundtree Way e-mail: [email protected]
117 Clydesmill Place Mousehold Lane
Cambuslang Investment Park Norwich NR7 8SR
Glasgow G32 8RF Tel: 01603 787878
Tel: 0141 646 3200 Fax: 01603 789999
Fax: 0141 646 3260 e-mail: [email protected]
e-mail: [email protected]