Sliding Stem Valve Specification

Customer: PT.Control Systems (PTCS)

Contact: Contact: FredyBoy Ismail
Customer Reference: Sales Office Reference: Lead Time:
Item: 1 Rev: Qty: 1 Quote: 171-FI-231113-0048899 Rev: D
Tags: FCV-V-12-02 Date Last Modified: 21/02/2024
Description: NPS 3 ET Origin Cert PL Valves Coatings & Paint 667 Size 45i Actuators Coatings & Paint DVC6200 Factory Mtgs
DVC7K/DVC6200/DVC2000 Process Level 3 Global Drawings
Service Description: Outlet Gas Fuel Gas Scrubber
SLW-V-12
|

Service: | Positioner Type: DVC6200,HART Communicating-HC

Size and Type: NPS 3 ET Input Signal: 4 to 20 mA dc
Body Style: Globe Access: 67CFR Filter/Regulator
Design Temp: 150 deg F Gauges: 0-60 psig/0-4 bar
Design Press: 225 psig Action: Direct
FM,Explosion Proof/Intrinsic
End Connect/In/Out: CL150/RF Flg/RF Flg Certification:
Safe/Nonincendive
Material: WCC Steel Controller Type: |
Ports: 1 Action: |
Flow Direction: Down Measure Element: |
Trim Number: 28 Range: |
Cage Matl: S31600 SST/ENC Output: |
Retainer Matl: | Mounting: |
Bushing Matl: | Airset: |
Seat Ring Matl: CoCr-A Seat Mounting: |
VALVE PLUG | Transducer: |
Material: S31600 SST/CoCr-A Seat Input Signal: |
Guiding: Cage Output Signal: |
Balance: Balanced Action: |
Shutoff Class: ANSI CL IV Mounting: |
Port Size: 3 7/16 Inch Airset: |
Characteristic: Equal Percent Certifications: |
Stem Material: S31600 SST Line In: 4 in, SCH 40
Stem Size: 1/2 Inch Line Out: 4 in, SCH 40
Bonnet Style: Plain Insulation: None
Boss Size: 2 13/16 Service Cond: |
Packing: Single PTFE Process Fluid: NATURAL GAS (0.60 SG)
Access: No,No Critical Pressure: |
Bolt, Bonnet: SA-193-B7 Studs/2H Nuts NCF2 Shutoff Drop: 225 psi
PackFlg/Bltg: SST Pkg Flg, SST Studs & Nuts | |
Actuator: Spring & Diaphragm | |
Type/Size: 667/45i | |
Travel: 1 1/2 Inch | |
Bench Set: 6-30 psi | |
Push Down To: PDTC | |
Supply: Air | |
To Actuator: 0 to 33 psig | |
Fails Valve: Close | |
|
Handwheel: None Max Rated Cv: 136.0
Variable Name Unit Min Normal Max
Volumetric Flow Rate Gas (Qg) MMscfd 0.50050 1.00100 1.50100
Inlet Pressure (P1) psig 32.00 43.00 49.00
Outlet Pressure (P2) psig 1.00 7.00 13.00
Inlet Temperature (T1) deg F 83.34 82.94 82.60
M / Gg SG 0.6336 0.6333 0.6331
Specific heats ratio (gamma) 1.30 1.30 1.30
Dynamic Viscosity (Mu) cP 0.01140 0.01140 0.01145
Sizing Coefficient (Cv) 11.53 19.34 26.57
% Open 31 42 49
Valve LpA(LpAeValve1m) dB(A) 81 84 85
|

NOTES:
 Valve/Regulator Sizing Calculation
Customer: PT.Control Systems (PTCS)
Contact: Contact: FredyBoy Ismail
Customer Reference: Sales Office Reference: Lead Time:
Item: 1 Rev: Qty: 1 Quote: 171-FI-231113-0048899/(No Name Assigned) Rev: D
Tags: FCV-V-12-01 Date Last Modified: 21/02/2024
Description: NPS 3 ET Origin Cert PL Valves Coatings & Paint 667 Size 45i Actuators Coatings & Paint DVC6200 Factory Mtgs
DVC7K/DVC6200/DVC2000 Process Level 3 Global Drawings
Service Description: Outlet Gas Fuel Gas Scrubber SLW-V-12

Sizing Type: Gas Flow is Turbulent Solving for: Cv Noise is IECAerodynamic Flow is Volumetric
Variable Name Units Min Normal Max
SERVICE & SIZING
Gas NATURAL GAS (0.60 NATURAL GAS (0.60 NATURAL GAS
SG) SG) (0.60 SG)
Inlet Pressure (P1) psig 32.00 43.00 49.00
Outlet Pressure (P2) psig 1.00 7.00 13.00
Inlet Temperature (T1) deg F 83.34 82.94 82.60
Volumetric Flow Rate Gas (Qg) MMscfd 0.50050 1.00100 1.50100
Pressure drop ratio factor (Xt) 0.68 0.63 0.62
Pressure Recovery Factor (Fl) 0.82 0.82 0.82
Valve style modifier (Fd) 0.65 0.38 0.36
Atmospheric Pressure psi 14.69 14.69 14.69
Dynamic Viscosity (Mu) cP 0.01140 0.01140 0.01145
Specific heats ratio (gamma) 1.30 1.30 1.30
Molecular Weight/Specific Gravity SG 0.6336 0.6333 0.6331
Inlet Compressibility Factor (Z1) 1.00 1.00 1.00

Pipe Size Up in 4 4 4
Pipe Schedule Up 40 40 40
Pipe Size Down in 4 4 4
Pipe Schedule Down 40 40 40
Nominal Valve Diameter (dv) in 3.00 3.00 3.00
Aerodynamic Distance (Rn) m 1.000 1.000 1.000

Sizing Coefficient (Cv) 11.53 19.34 26.57

dP Choked bar 2.02 2.33 2.51
dP/P1 Valve 0.66 0.62 0.57
Fp 1.00 1.00 1.00

NOISE CALCULATION
Valve/Trim Globe/Angle Globe/Angle Globe/Angle
LpAeTrim1m dB(A) 81 84 85
LpAeOutlet1m dB(A) < 50 < 50 < 50
Valve Lpa (LpAe1m) dB(A) 81 84 85
Valve Lpa (LpAeRn) dB(A) 81 84 85

VELOCITY OUTPUTS
Valve Outlet Area(Ao) in2 7.10 7.10 7.10
M1 Pipe Mach 0.02 0.03 0.03
Mo Valve Mach 0.10 0.12 0.14
M2 Pipe Mach 0.05 0.07 0.08
V1 Pipe m/s 6.57 10.63 14.43
Vo Valve m/s 46.85 50.69 59.50
V2 Pipe m/s 26.13 28.27 33.18
C1 Pipe m/s 421.60 421.54 421.48
Co Valve m/s 487.38 421.54 421.48
C2 Pipe m/s 487.38 421.54 421.48
Item Notes:
 Actuator Sizing Calculation
Customer: PT.Control Systems (PTCS)
Contact: Contact: FredyBoy Ismail
Customer Reference: Sales Office Reference: Lead Time:
Item: 1 Rev: Qty: 1 Quote: 171-FI-231113-0048899 Rev: D
Tags: FCV-V-12-01 Date Last Modified: 21/02/2024
Description: NPS 3 ET Origin Cert PL Valves Coatings & Paint 667 Size 45i Actuators Coatings & Paint DVC6200 Factory Mtgs
DVC7K/DVC6200/DVC2000 Process Level 3 Global Drawings
Service Description: Outlet Gas Fuel Gas Scrubber SLW-V-12
Variable Name Values Units
Pas Available 35.00 psig
Valve Body Size 3.0 in
Port Diameter 3.44 in
Unbalanced Area 0.40 in2
Valve Travel 1.50 in
Valve Stem Size .5 in
Valve Friction 50.00 lbf
Additional Friction 0.00 lbf
Seat load force 40.00 lbf/in
P1 Max 225.00 psig
P2 Min 0.00 psig
Unbalance Force @ Open 0.00 lbf
Fluid Negative Gradient 0.4 in
dP Flowing 36.00 psi
With Side MO No

Works Yes
Actuator Size 45i
Spring 1E8262
Product Lower Bench Set 6.00 psig
Product Upper Bench Set 30.00 psig
Spring Rate 1670.00 lbf/in
Spring Windup 0.38 in
Max Spring Load 3134.92 lbf
PS Required 32.33 psig
Actuator thrust down 629.92 lbf
Actuator thrust up 260.00 lbf
Valve thrust down 571.97 lbf
Valve thrust up 50.00 lbf
Lower Bench Set 6.00 psig
Upper Bench Set 29.86 psig
Lower Stroking 5.14 psig
Upper Stroking 29.86 psig
Lower Friction Band(+/-) 0.48 psig
Upper Friction Band(+/-) 0.48 psig
Lower Operating 0.55 psig
Upper Operating 30.33 psig
Req. Handwheel thrust 3184.92 lbf
Supply Pressure Used 35.00 psig