Sliding Stem Valve Specification

Customer: PT.Control Systems (PTCS)

Contact: Contact: FredyBoy Ismail
Customer Reference: Sales Office Reference: Lead Time:
Item: 2 Rev: Qty: 1 Quote: 171-FI-231113-0048899 Rev: D
Tags: LV-V-12-01 Date Last Modified: 21/02/2024
Description: NPS 3/4 EZ Origin Cert PL Valves Coatings & Paint 667 Size 30i Actuators Coatings & Paint 3582 67CF Series Acc
Process Level 3 Global Drawings
Service Description: Condensat Line Fuel Gas Scrubber
SLW-V-12
|

Service: | Positioner Type: 3582

Size and Type: NPS 3/4 EZ Input Signal: 6 to 30 psig
Body Style: Globe Access: None
Design Temp: 150 deg F Gauges: psig/MPa/bar
Design Press: 225 psig Action: Direct
End Connect/In/Out: CL150/RF Flg/RF Flg Certification: |
Material: WCC Steel Controller Type: |
Ports: 1 Action: |
Flow Direction: Up Measure Element: |
Trim Number: 128 Range: |
Cage Matl: | Output: |
Retainer Matl: CF8M SST Mounting: |
Bushing Matl: R30006 Cobalt Alloy Airset: |
Seat Ring Matl: S31600 SST/CoCr-A Seat Mounting: |
VALVE PLUG | Transducer: |
Material: S31600 SST/CoCr-A Seat Input Signal: |
Guiding: Post Output Signal: |
Balance: Unbalanced Action: |
Shutoff Class: ANSI CL IV Mounting: |
Port Size: 3/8 Inch Airset: |
Characteristic: Micro-Form (Eq Pct) Certifications: |
Stem Material: S31600 SST Line In: 2 in, SCH 40
Stem Size: 3/8 Inch Line Out: 2 in, SCH 40
Bonnet Style: Plain Insulation: None
Boss Size: 2 1/8 Service Cond: |
Packing: Single PTFE Process Fluid: HC Liquid + Water
Access: No,No Critical Pressure: 162.500 psia
Bolt, Bonnet: SA-193-B7 Studs/2H Nuts NCF2 Shutoff Drop: 225 psi
PackFlg/Bltg: SST Pkg Flg, SST Studs & Nuts | |
Actuator: Spring & Diaphragm | |
Type/Size: 667/30i | |
Travel: 3/4 Inch | |
Bench Set: 6-30 psi | |
Push Down To: PDTC | |
Supply: Air | |
To Actuator: 0 to 33 psig | |
Fails Valve: Close | |
|
Handwheel: None Max Rated Cv: 3.03
Variable Name Unit Min Normal Max
Volumetric Flow Rate Liquid (Ql) m3/h 0.2301 0.4660 0.7000
Inlet Pressure (P1) psig 33.000 45.000 51.000
Outlet Pressure (P2) psig 18.000 30.000 36.000
Inlet Temperature (T1) deg F 83.400 83.000 82.760
SG 0.8079 0.8071 0.8067
Dynamic Viscosity (Mu) cP 12.400 12.210 12.140
Vapor Pressure (Pv) psia 30.000 30.000 30.000
Sizing Coefficient (Cv) 0.235 0.476 0.715
% Open 23 42 54
Valve Lpa (LpAe1m) dB(A) < 50 < 50 < 50
|

NOTES:
 Valve/Regulator Sizing Calculation
Customer: PT.Control Systems (PTCS)
Contact: Contact: FredyBoy Ismail
Customer Reference: Sales Office Reference: Lead Time:
Item: 2 Rev: Qty: 1 Quote: 171-FI-231113-0048899/(No Name Assigned) Rev: D
Tags: LV-V-12-01 Date Last Modified: 21/02/2024
Description: NPS 3/4 EZ Origin Cert PL Valves Coatings & Paint 667 Size 30i Actuators Coatings & Paint 3582 67CF Series Acc
Process Level 3 Global Drawings
Service Description: Condensat Line Fuel Gas Scrubber SLW-V-12

Sizing Type: Liquid Flow is Turbulent Solving for: Cv Noise is Hydrodynamic Flow is Volumetric
Variable Name Units Min Normal Max
SERVICE & SIZING
Liquid HC Liquid + Water HC Liquid + Water HC Liquid + Water
Specific Gravity (SG) 0.8079 0.8071 0.8067
Inlet Pressure (P1) psig 33.000 45.000 51.000
Outlet Pressure (P2) psig 18.000 30.000 36.000
Inlet Temperature (T1) deg F 83.400 83.000 82.760
Volumetric Flow Rate Liquid (Ql) m3/h 0.2301 0.4660 0.7000
Pressure Recovery Factor (Fl) 0.930 0.930 0.930
Valve style modifier (Fd) 0.128 0.185 0.228
Cavitation coefficient (Kc) 1.000 1.000 1.000
Dynamic Viscosity (Mu) cP 12.400 12.210 12.140
Vapor Pressure (Pv) psia 30.000 30.000 30.000
Critical Pressure (Pc) psia 162.500 162.500 162.500
Atmospheric Pressure psi 14.69 14.69 14.69

Pipe Size Up in 2 2 2
Pipe Schedule Up 40 40 40
Pipe Size Down in 2 2 2
Pipe Schedule Down 40 40 40
Nominal Valve Diameter (dv) in 0.750 0.750 0.750

Sizing Coefficient (Cv) 0.235 0.476 0.715

Application Ratio (Ar) 0.848 0.505 0.420
dP Cavitation bar 1.220 2.047 2.460
dP Choked bar 1.342 2.057 2.415
Fp 1.000 1.000 0.999

NOISE CALCULATION
Hydrodynamic Trim Standard Trim Standard Trim Standard Trim
Valve Lpa (LpAe1m) dB(A) < 50 < 50 < 50

VELOCITY OUTPUTS
V1 Pipe m/s 0.030 0.060 0.090
V2 Pipe m/s 0.030 0.060 0.090
WARNINGS
A preliminary check A preliminary check A preliminary check
indicates the indicates the indicates the
possibility of non- possibility of non- possibility of non-
turbulent flow. turbulent flow. turbulent flow.
Item Notes:
 Actuator Sizing Calculation
Customer: PT.Control Systems (PTCS)
Contact: Contact: FredyBoy Ismail
Customer Reference: Sales Office Reference: Lead Time:
Item: 2 Rev: Qty: 1 Quote: 171-FI-231113-0048899 Rev: D
Tags: LV-V-12-01 Date Last Modified: 21/02/2024
Description: NPS 3/4 EZ Origin Cert PL Valves Coatings & Paint 667 Size 30i Actuators Coatings & Paint 3582 67CF Series Acc
Process Level 3 Global Drawings
Service Description: Condensat Line Fuel Gas Scrubber SLW-V-12
Variable Name Values Units
Pas Available 35.00 psig
Valve Body Size .75 in
Port Diameter 0.38 in
Unbalanced Area 0.11 in2
Valve Travel 0.75 in
Valve Stem Size .375 in
Valve Friction 38.00 lbf
Additional Friction 0.00 lbf
Seat load force 40.00 lbf/in
P1 Max 225.00 psig
P2 Min 0.00 psig
Unbalance Force @ Open 0.00 lbf
Fluid Negative Gradient 0.00 in
dP Flowing 15.00 psi
With Side MO No

Works Yes
Actuator Size 30i
Spring 1E7924
Product Lower Bench Set 6.00 psig
Product Upper Bench Set 30.00 psig
Spring Rate 1470.00 lbf/in
Spring Windup 0.19 in
Max Spring Load 1378.57 lbf
PS Required 32.79 psig
Actuator thrust down 276.07 lbf
Actuator thrust up 130.00 lbf
Valve thrust down 109.87 lbf
Valve thrust up 38.00 lbf
Lower Bench Set 6.00 psig
Upper Bench Set 29.97 psig
Lower Stroking 5.46 psig
Upper Stroking 29.97 psig
Lower Friction Band(+/-) 0.83 psig
Upper Friction Band(+/-) 0.83 psig
Lower Operating 3.61 psig
Upper Operating 30.79 psig
Req. Handwheel thrust 1416.57 lbf
Supply Pressure Used 35.00 psig