GS1 186-2 T8 Bola NPT 800# Spirax Sarco
GS1 186-2 T8 Bola NPT 800# Spirax Sarco
ST Issue 6
ISO 9001
M10S
Ball Valve DN¼" to DN2½"
Description 14 12 13 4 11 10 7
M10S is a three piece body ball valve designed for steam and other
industrial fluids for services ranging from vacuum to the higher
temperatures and pressures.
M10S can be serviced without removing the valve from the pipeline.
(Screwed and welded versions only).
Available types
M10S2RB Zinc plated carbon steel body, R-PTFE seats, reduced bore. 9
M10S2FB Zinc plated carbon steel body, R-PTFE seats, full bore. 8
M10S3RB Stainless steel body, R-PTFE seats, reduced bore. 6
M10S3FB Stainless steel body, R-PTFE seats, full bore. 5
3
M10S4RB A complete stainless steel construction, 1
R-PTFE seats, reduced bore.
A complete stainless steel construction, 16
M10S4FB R-PTFE seats, full bore.
2
15
Options
• Self-venting ball.
• Extended stem to 50 mm (2") and 100 mm (4") to allow full insulation.
• Lockable handle.
• Oval handle for confined spaces. Ideal for trap modules.
Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification. © Copyright 2000
Dimensions (approximate) in mm Kv values
Reduced bore Size ¼" 3
/ 8" ½" ¾" 1" 1¼" 1½" 2" 2½"
Size A A1 A2 A3 B B1 C C1 D D1 D2 E Reduced bore 2.5 2.5 6 10 27 49 70 103 168
¼" 56 52 - - 120 - 57 - 22 - - 8 Full bore 2.5 6.8 17 36 58 89 153 205 -
3/ 8" 56 52 - - 120 - 57 - 22 - - 8 For conversion Cv (UK) = Kv x 0.97 Cv (US) = Kv x 1.17
½" 63 52 108 130 120 120 61 87 24 89 95 11
¾" 68 60 117 150 120 120 63 89 26 98 105 14
Operating torque (N m)
Size ¼" 3/ 8
" ½" ¾" 1" 1¼" 1½" 2" 2½"
1" 86 84 127 160 157 157 91 91 31 108 115 21
Reduced bore 2 2 2 3.5 13 21 30 40 45
1¼" 99 94 140 180 157 157 95 95 37 118 140 25
Full bore 2 2 3.5 13 21 30 40 45 -
1½" 108 102 165 200 180 180 109 109 41 127 150 31
2" 124 118 178 230 180 180 115 115 48 152 165 38 The indicated torque values are for valves frequently operated, that
are submitted to a maximum differential pressure of 100 bar.
2½" 152 152 - - 245 - 132 - 57 - - 51 Valves that are subject to long static periods, may require up to 75%
greater break out torque.
Full bore
¼" 56 58 - - 120 - 57 - 22 - - 8 Maintenance
3/ 8" Before commencing any dismantling work ensure that no flow is
63 60 - - 120 - 61 - 24 - - 11 taking place in the pipeline and the line is isolated. Any fluid
½" 68 64 - 130 120 120 63 89 26 - 95 14 remaining in the line should be drained off.
The new parts can be fitted without removing the complete ball
¾" 86 84 - 150 157 157 91 91 31 - 105 21 valve from the pipeline (screwed, SW and BW versions only).
1" 99 98 - 160 157 157 95 95 37 - 115 25 Remove the two upper bolts and nuts and loosen the lower two. The
complete assembly can then be removed and the new parts fitted.
1¼" 108 106 - 180 180 180 109 109 41 - 140 31 M10S flanged ball valves must be removed from the pipeline to
1½" 124 124 - 200 180 180 115 115 48 - 150 38 facilitate the fitting of the new parts.
2" 152 152 - 230 245 245 132 132 57 - 165 51
How to order
Example: Spirax Sarco ½" screwed BSP M10S2FB ball valve.
Weights (approximate) in kg
Reduced bore Full bore Spare parts
Size Scrd / BW/ SW PN40 ANSI 150 Scrd / BW/ SW PN40 The spare parts available are shown in heavy outline. Parts drawn
in broken line are not supplied as spares.
¼" 0.52 - - 0.52 -
3 Available spare
/ 8" 0.52 - - 0.61 -
Seat and stem seal set 5, 6
½" 0.61 2.2 1.65 0.70 2.3
¾" 0.70 2.9 2.20 1.27 3.5 How to order spares
1" 1.27 3.9 3.38 1.77 4.4 Always order spares by using the description given in the column
headed 'Available spare' and stating the size and type of ball valve.
1¼" 1.77 5.4 4.44 2.50 6.2 Example: 1-Seat and stem seal set for ½" M10S2FB ball valve.
1½" 2.50 6.5 5.84 3.50 7.5
2" 3.50 8.8 8.99 6.90 12.2
2½" 6.90 - - - -
➤
B, B1 ➤
➤
➤
C,
C1
➤
D1,
➤
ØE
➤
D2
➤
D
➤
➤
A, A1 ➤ 6
➤
➤ 5 5
A2, A3 ➤ 6
A :
Scrd and BW
A1 :
SW
A2 :
Flanged ANSI 150
A3 :
Flanged PN40
B :
Scrd, BW, SW
B1 :
Flanged ANSI 150, PN40
C :
Scrd, BW, SW
C1 :
Flanged ANSI 150,
Flanged PN40
D : Scrd, BW, SW
D1 : Flanged ANSI 150
D2 : Flanged PN40