Scribd
Upload
369 views

Embedded EWM CLASS 41 - Scrapping Process

The document describes the process for scrapping material in EWM. It involves posting a change document to change the stock type to scrap, then creating a warehouse task to move the material to a scrap bin. It provides the steps and screenshots for these processes.

Uploaded by

fl.munaff
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
369 views

Embedded EWM CLASS 41 - Scrapping Process

The document describes the process for scrapping material in EWM. It involves posting a change document to change the stock type to scrap, then creating a warehouse task to move the material to a scrap bin. It provides the steps and screenshots for these processes.

Uploaded by

fl.munaff
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Embedded EWM – CLASS 41 – Scrapping Process

Process Steps

I. Posting Change Document for Stock Type Change in Warehouse


1. Create Posting Change Document - /N/SCWM/POST
Posting Change document/Warehouse Task created
2. Confirm Warehouse Task = /N/SCWM/TO_CONF
Confirm Warehouse Order/Warehouse Task
3. Check in Warehouse Monitor - /N/SCWM/MON
Stock Type changed from F2 to S6
4. Stock check in ECC = MMBE
5. Material Document & Stock Movement in ECC = MB51

II. Create Warehouse Task to Move the material into SCRAP BIN (SCRAP-ZONE)
1. Create Warehouse Task = /N/SCWM/ADPROD
Warehouse task Created
Warehouse order Confirmed
2. Check in Warehouse Monitor - /N/SCWM/MON
No Stock Type changes
Only BIN to BIN Transfer
No Stock Movement in ECC (Because we are not changing stock type in EWM)

Prashanth Venkategowda Page No: 1


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]
Embedded EWM – CLASS 41 – Scrapping Process

I. Posting Change Document for Stock Type Change in Warehouse

1. POST the stock to Stock type as S6 (Scrap)


Tcode - /N/SCWM/POST
Will do the transfer posting of the Product – 125 to Stock type S6 from F2
Source Bin – 0150-01-05
Click on Form View

Create + Save
Warehouse Order = 6000000047

2. Confirm Warehouse Task = /N/SCWM/TO_CONF

Click Confirm + Save


Warehouse task 600000000154 was confirmed

Prashanth Venkategowda Page No: 2


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]
Embedded EWM – CLASS 41 – Scrapping Process

3. Check in Warehouse Monitor - /N/SCWM/MON

Stock Type changed from F2 to S6

4. Stock check in MMBE

Scrap Stock of EWM shown as Block stock in ECC

5. Material Document & Stock Movement in ECC = MB51

Prashanth Venkategowda Page No: 3


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]
Embedded EWM – CLASS 41 – Scrapping Process

II. Create Warehouse Task to Move the material into SCRAP BIN (SCRAP-ZONE)

1. Create Warehouse Task = /N/SCWM/ADPROD


Enter Material Number and execute
Select Line as shown below

Click on Form view


Enter quantity & Enter Warehouse process type
Note: Once you enter Warehouse Process type, Destination storage type “SCRAPPING GONE”
taken automatically
Then click on Create+Save

Warehouse order 6000000042 created

Confirm the warehouse task

Prashanth Venkategowda Page No: 4


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]
Embedded EWM – CLASS 41 – Scrapping Process

Click Confirm +Save

Warehouse order confirmed

2. Check in Warehouse Monitor - /N/SCWM/MON

Prashanth Venkategowda Page No: 5


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]
Embedded EWM – CLASS 41 – Scrapping Process

Note:
Only BIN TO BIN Movement & No Stock type change
No Stock Movement in ECC (Because we are not changing stock type in EWM)

Prashanth Venkategowda Page No: 6


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]
Embedded EWM – CLASS 41 – Scrapping Process

WAREHOUSE = E102
Storage type – 0100 (Fixed Bin Cold Storage)
SCRAP-ZONE
Fixed Bin – 0100-01-01
Storage Type – 1040
Storage Type Search Seq – 0100, Putaway control indicator-0100
Bin – SCRAP-ZONE
WPT – 1020
Avl Group – 002
STORAGE TYPE – 0150 (General Storage - High Rack Storage) Stock Type – S6
Activity Area – AA15 & Assigned to Storage type 0150
Activity – PICK & PTWY
Availability Group-002, Stock type-F2 (SL Assigned AF02)
Storage type search sequence-P150, Putaway control indicator-P150
Storage type – 9060, Storage type – 9099,
Storage section-0001, Bin – Storage section-0001,
RAIL-DOOR Storage Section – 0001 Storage Section – 0002 Bin – EXPEDIATE AREA GI
(Product can be received (Fast Moving) (Slow Moving) (Product picked for
from Rail) emergency deliveries)
Bin – 0150-01-01 Bin – 0150-11-01
Warehouse Process Type-9060 Bin – 0150-01-02 Bin – 0150-11-02 Warehouse Process Type-
WPT Control Indicator – 60 Bin – 0150-01-03 Bin – 0150-11-03 2099
Availability Group-002, Bin – 0150-11-04 WPT Control Indicator - 61
Bin – 0150-01-04
Stock type-F2 (SL Bin – 0150-11-05
Bin – 0150-01-05
Assigned AF02) Bin – 0150-11-06
Bin – 0150-01-06

Storage type – 8099 (Represent work center)


Storage section-0001, Bin – EXP-PACKING
Work Center “EXVP” & Assigned to Bin “EXP-PACKING”

Prashanth Venkategowda Page No: 7


EWM & LE Consultant Version:1
Cell: +91 7760768986, Email: [email protected]

You might also like