SPLIT-CASE

PUMPS
 SPLIT-CASE PUMPS
PD & PDV series
PD & PDV Split-case pumps are single stage, double suction centrifugal
pumps. These pumps ensure a long service life, high efficiency, low
operations cost, friendly maintenance and service

CONSTRUCTION
PD & PDV pump casings, are split along the shaft axis and allow easy inspection
and replacement of the rotating parts. The position of inlet and outlet nozzles
(in the lower half case of PD horizontal pumps or in the rear half case of PDV
vertical pumps) allows inspection and repair without removing the pump from
its position.

Impeller: Closed type the double suction grants stable operation, low energy
cost, low noise, minimum vibrations and long life.
Shaft: Protected by replaceable sleeves, it has no contact with the pumped fluid.
Seals: Standard pumps are supplied with gland packing, and mechanical
seals are available on request.
Bearings: This range of pumps is almost free of hydraulic axial thrust; Thanks
to the double suction symmetry and to the opposed impellers the bearings do
not have to support axial loads. They are roller type, grease or oil lubricated.
The rotating part is dynamically balanced and free of undue vibrations.
FIELD APPLICATION
Rotation speed: Pump performances refer to rotating speeds from 1450 to
PD & PDV Pumps are used in civil, industrial and
farming facilities, especially for.
970 rpm (at 50Hz) but these pumps can also run at different frequencies (60
nn Municipal water supply Hz) or suit other requirements (subject to technical analysis).
nn Central heating Coupling: Usually direct, with pump and motor on the same baseplate,
nn Power plant
nn Steel works
coupled by means of a flexible joint, for horizontal assemblies; with motor
nn Drainage pump station stool lying on the pump in case of vertical assemblies. In the latter case the
nn Petro-chemical industry motor can also be mounted on a separate plate and coupled to the pump by
nn Air conditioning
nn Water treatment
means of universal joint.
nn Fire-Fighting Standard – Testing – Tolerances: Standard nozzles comply with ISO 1092.
The range includes 27 models with delivery nozzles On request, they can be machined according to DIN – ANSI and other
from 125 to 350 mm, large sizes are available on standards.
request (delivery nozzles up to 450 mm). Tests and related tolerances as per ISO 9906 Gr.2

PERFORMANCE RANGE DESCRIPTION STANDARD OPTION

Q l/s •Ductile Cast Iron (EN-GJS-400-15)
30 40 50 100 200 300 400 500 1000 Pump Casing Cast Iron (EN-GJL-250)
200
50 Hz - 1450 Rpm •Cast Steel (GX6CrNiMo1810)
H m

•Bronze (G-CuSn10)
Impeller Cast Iron (EN-GJL-250)
100
90 •Stainless Steel (GX2CrNiMo19 11)
80
70
60
Shaft Carbon Steel (C45) •Stainless Steel (AISI 420)
Total manometric Head

50
40

30
Shaft sleeves Carbon Steel (C45) •Stainless Steel (AISI 420)
20

•Bronze (G-CuSn10)
Casing wear rings Cast Iron (EN-GJL-250)
•Stainless Steel (AISI 420)
10
9
8
7
6
Shaft seals Soft Packing •Mechanical Seal
5
100 200 300 500 700 1000 2000 3000 5000
Q m³/h
Capacity Lubrication Grease or Oil

CAPACITY: from 50 m³/h to 3.500 m³/h

HEAD: from 10 m to 170 m
MAX. WORKING PRESSURE: 25 bar
TEMPERATURE OF PUMPING MEDIA: 130°C
 SECTIONAL DRAWINGS

SPLIT-CASE PUMP - PD -
3260.1 4210.1 1210.1 2100 4212 3132.2

3011.1 2450 2200 4200 3260.2 7200.1

3132.1 2460 9200 1500 4210.2 3011.2 7200.2

POS. PARTS NAME

1210.1 Upper Casing

4120 4130 1210.2 1210.2 Lower Casing

1500 Casing Wear Ring
2100 Shaft
2200 Impeller
2450.1 to .2 Shaft sealing Sleeve

SPLIT-CASE PUMP - PDV - 2460 Bearing Spacer Sleeve

3011.1 to.2 Radial Ball Bearing
3132.1 Bearing Housing N.D.E.
3132.2 Bearing Housing D.E.
3160 Motor Bracket
3240 Bearing Housing

7200.2 3260.1 to 2 Bearing Cover

7200.1
3300 Bearing Bush
3132
3011
4120 Gland
4130 Gland Packing
2460 4200 Mechanical Seal
3260.1
4210.1 Packing Seal Housing
4212
4200 4120 4210.2 Mechanical Seal Housing
4130 4212 Mechanical Seal Cover
3160
4210.2
4210.1 6110 Base Plate
2110
1210.2
2450.1 7200.1 Pump Half Coupling
1500
7200.2 Motor Half Coupling

1210.1
9200 Flushing Pipe
2200

2450.2
9200
3240
3300
3260.2
6110
INSTALLATION TYPE

liberaadv.com
Horizontal Execution Vertical Execution

ROTATION DIRECTION / FLOW DIRECTION

Counter Clockwise Clockwise Counter Clockwise Clockwise

Viewed from the Viewed from the Viewed from the Viewed from the
Drive end Drive end Drive end Drive end

20060 Gessate (MI) - ITALY - Piazza Aturia 9 - Tel. +39 02 95423200 - Fax +39 02 95423202
09-13/3079 E

10156 Torino - ITALY - Corso Romania 501/18

45019 Taglio di Po (Rovigo) - ITALY - Via dell’Industria 4
www.gruppoaturia.com