IPS CARBON STEEL PIPE

GROOVED FITTINGS 07.01

R

Grooved End
Fittings
PRODUCT DESCRIPTION
Victaulic offers a broad line alignment. These fittings Victaulic fittings are
of fittings in sizes through are not intended for use designed specifically for
48" (1219,2 mm) in a variety with Victaulic couplings for use in grooved piping sys-
of straight and reducing plain end pipe (refer to Sec- tems. Fittings are provided
styles. Most standard fit- tion 14.04 for fittings avail- grooved or with shoulders
tings are cast of durable able for plain end conforming to standard
ductile iron to precise toler- applications). steel pipe outside diame-
ances. Victaulic standard ters. When connecting
Fittings are provided in var-
fittings pressure ratings wafer or lug-type butterfly
ious materials including
conform to the ratings valves directly to Victaulic
malleable iron, ductile iron, fittings with 741 or 743 Vic-
of Victaulic Style 77
steel or segmentally welded Flange® adapters, check
couplings.
steel depending on styles disc clearance dimensions
All fittings are supplied and size. Fittings are with I.D. dimension of
with grooves or shoulders painted orange enamel
fitting.
to permit fast installation with galvanized optionally
without field preparation. available, contact Victaulic
The grooved design per- for details.
mits flexibility for easy

Stainless Steel – Grooved Aluminum – Grooved end

end fittings are available in fittings are available in alu-
Schedule 10 Type 316 minum alloy 356 T6, in
stainless steel (Schedule 5, sizes from 1 - 8" (33,7 -
40 and Type 304 optionally 219,1 mm). Refer to Section
available) in various sizes. 21.03 or contact Victaulic
Fitting center-to-end for details.
dimensions will vary
depending upon type and
schedule. Refer to Section
17.04 for details.

Alternate Styles A
Extra Heavy EndSeal® Fittings Machined for B
H
“ES” Fittings – EndSeal Rubber or Urethane Lin-
+0
fittings are available in 2 - ing (MRL) – For severe -0.030"
12" (60,3 - 323,9 mm) for abrasive services, Victaulic
use with “ES” grooved pipe fittings may be rubber or
and HP-70ES EndSeal or urethane lined (by others).
C 0.030" R
Fire-R™ couplings. “ES” fit- Lining may be inside diam-
tings are painted green for eter/end (abrasion resis- FOR ABRASION RESISTANCE ONLY
easy identification. EndSeal tance) or wrap-around
A
(and standard) fittings may (corrosion and/or abrasion)
B H
be easily internally coated machined. Refer to Section
(by others) for severe ser- 25.03 or contact Victaulic F G
vice requirements. Always for specific details.
specify “ES EndSeal fit- T O.D.
tings” when ordering. See
Section 07.03 for informa- O.D. C E 0.030" R

tion on EndSeal fittings. FOR CORROSION AND/OR

ABRASION RESISTANCE

Victaulic® World Headquarters • P.O. Box 31, Easton, PA 18044-0031 • 4901 Kesslersville Rd., Easton, PA 18040 • 610/559-3300 • FAX: 610/250-8817 • www.victaulic.com
1449 Rev.F 8/00 ® Registered Trademark of Victaulic © Copyright 2000 Victaulic Printed in U.S.A.
FLOW DATA† The chart expresses the frictional resistance of various Victaulic fittings as equivalent feet of straight
(Frictional Resistance) pipe. Fittings not listed can be estimated from the data given, for example, a 22¹⁄₂° elbow is
approximately one-half the resistance of a 45° elbow. Values of mid-sizes can be interpolated.
07.01-1A

Dimension – Feet/meters Dimension – Feet/meters

Elbows Tees Elbows Tees
90° Elbows 45° Elbows 90° Elbows 45° Elbows
SIZE SIZE
Nominal Nominal No. 100 No. 110
Inches No. 10 No. 100 No. 11 No. 110 Inches No. 10 1¹⁄₂ D No. 11 1¹⁄₂ D
Actual Std. 1¹⁄₂ D Long Std. 1¹⁄₂ D Long Actual Std. Long Std. Long
mm Radius Radius Radius Radius Branch Run mm Radius Radius Radius Radius Branch Run
1 1.7 – 0.8 – 4.2 1.7 8 13.0 9.8 6.5 4.0 33.0 13.0
33,7 0,5 – 0,2 – 1,3 0,5 219,1 4,0 3,0 2,0 1,2 10,1 4,0
2 3.5 2.5 1.8 1.1 8.5 3.5 10 17.0 12.0 8.3 5.0 41.0 17.0
60,3 1,1 0,8 0,5 0,3 2,6 1,1 273,0 5,2 3,7 2,5 1,5 12,5 5,2
3 O.D. 4.3 – 2.1 – 10.8 4.3 12 20.0 14.5 10.0 6.0 50.0 20.0
76,1 1,3 – 0,7 – 3,3 1,3 323,9 6,1 4,4 3,0 1,8 15,2 6,1
3 5.0 3.8 2.6 1.6 13.0 5.0 14 # 15.8 # 11.0 70.0 23.0
88,9 1,5 1,2 0,8 0,5 4,0 1,5 355,6 # 4,8 # 3,4 21,3 7,0
4¹⁄₄ O.D. 6.4 – 3.2 – 15.3 6.4 16 # 18.0 # 13.0 80.0 27.0
108,0 2,0 – 0,9 – 4,7 2,0 406,4 # 5,5 # 4,0 24,4 8,2
4 6.8 5.0 3.4 2.1 16.0 6.8 18 # 20.0 # 14.0 90.0 30.0
114,3 2,1 1,5 1,0 0,6 4,9 2,1 457,0 # 6,1 # 4,3 27,4 9,1
5¹⁄₄ O.D. 8.1 – 4.1 – 20.0 8.1 20 # 22.5 # 16.0 100.0 33.0
133,0 2,5 – 1,2 – 6,2 2,5 508,0 # 6,9 # 4,9 30,5 10,1
5¹⁄₂ O.D. 8.5 – 4.2 – 21.0 8.5 24 # 27.0 # 19.0 120.0 40.0
139,7 2,6 – 1,3 – 6,4 2,6 610,0 # 8,2 # 5,8 36,6 12,2
5 8.5 – 4.2 – 21.0 8.5 26 # 28.0 # 20.5 130.0 43.0
141,3 2,6 – 1,3 – 6,4 2,6 660,4 # 8,5 # 6,3 39,6 13,1
6¹⁄₄ O.D. 9.4 – 4.9 – 25.0 9.6 30 # 34.0 # 24.0 150.0 50.0
159,0 2,9 – 1,5 – 7,6 2,9 762,0 # 10,4 # 7,3 45,7 15,2
6¹⁄₂ O.D. 9.6 – 5.0 – 25.0 10.0 36 # 40.5 # 28.5 180.0 60.0
165,1 2,9 – 1,5 – 7,6 3,0 914,0 # 12,3 # 8,7 54,9 18,3
6 10.0 7.5 5.0 3.0 25.0 10.0 42 # 47.0 # 33.0 210.0 70.0
168,3 3,0 2,3 1,5 0,9 7,6 3,0 1067,0 # 14,3 # 10,1 64,0 21,3
† The flow data listed is based upon the pressure drop of Schedule 40 pipe.
# Contact Victaulic for details.

MATERIAL SPECIFICATIONS
Fitting: Ductile iron conforming ❏ 8 - 12" (219,1 - 323,9 mm): Fitting Coatings: Orange
to ASTM A-536. Carbon steel, Standard wall, enamel
Or: 14 - 24" (355,6 - conforming to ASTM A-53, ❏ Optional: Hot dip galvanized
610,0 mm), forged steel, con- Type E or S, Gr. B and others. Some fittings sup-
forming to ASTM A-234, Gr. ❏ 14 - 24" (355,6 - 610,0 mm): plied electroplated as stan-
WPB (0.375" wall) Carbon steel, Schedule 40, dard – see product
Or: Segmentally welded steel conforming to ASTM A-53, specifications.
as shown under nipples Type E or S, Gr. B
Nipples: (adapter, swaged & Flanged Adapter Nipples:
hose) (Nipple – see above)
❏ ³⁄₄ - 4" (26,9 - 114,3 mm): ❏ Class 125 Flange: Cast iron
Carbon steel, Schedule 40, conforming to ANSI B-16.1
conforming to ASTM A-53, ❏ Class 150 Flange: Carbon
Type F steel conforming to ANSI
❏ 5 - 6" (141,3 - 168,3 mm): B-16.5
Carbon steel, Schedule 40, ❏ Class 300 Flange: Carbon
conforming to ASTM A-53, steel conforming to ANSI B-
Type E or S, Gr. B 16.5

07.01 - 2
Fittings
(Ductile iron)

C to E
E to E
C to E
C to E

C to E
C to E
C C to E C
to E to
E

07.01-2D

No. 10 No. 11 No. 12 No. 13 No. 20 No. 35

90° Elbow 45° Elbow 22¹⁄₂° Elbow 11¹⁄₄° Elbow Tee Cross (sw)
SIZE
Nominal Aprx. Aprx. Aprx. Approx. Aprx. Aprx.
Inches C to E Wgt. Ea. C to E Wgt. Ea. C to E Wgt. Ea. C to E Wgt. Ea. C to E Wgt. Ea. C to E Wgt. Ea.
Actual Inches Lbs. Inches Lbs. Inches Lbs. Inches Lbs. Inches Lbs. Inches Lbs.
mm mm kg mm kg mm kg mm kg mm kg mm kg
³⁄₄ 2.25 0.5 1.50 0.5 1.63 sw – 1.38 sw – 2.25 0.6 2.25 0.9
26,9 57 0,2 38 0,2 41 – 35 – 57 0,3 57 0,4
1 2.25 0.6 1.75 0.6 3.25 @ 0.6 1.38 sw 0.3 2.25 1.0 2.25 1.3
33,7 57 0,3 44 0,3 83 0,3 35 0,1 57 0,5 57 0,6
1¹⁄₄ 2.75 1.0 1.75 0.9 1.75 0.8 1.38 sw 0.5 2.75 1.5 2.75 2.1
42,4 70 0,5 44 0,4 44 0,4 35 0,2 70 0,7 1,0 1,0
1¹⁄₂ 2.75 1.2 1.75 0.9 1.75 0.8 1.38 sw 0.5 2.75 2.0 2.75 2.5
48,3 70 0,5 44 0,4 44 0,4 35 0,2 70 0,9 70 1,1
2 3.25 1.8 2.00 1.3 3.75 @ 1.4 1.38 1.0 3.25 3.0 3.25 3.8
60,3 83 0,8 51 0,6 95 0,6 35 0,5 83 1,4 83 1,7
2¹⁄₂ 3.75 3.2 2.25 2.2 4.00 @ 2.3 1.50 1.1 3.75 4.3 3.75 6.1
73,0 95 1,5 57 1,0 102 1,0 38 0,5 95 2,0 95 2,8
3 O.D. 3.75 3.7 2.25 3.4 – – – – 3.75 5.2 – –
76,1 95 1,7 57 1,5 – – – – 95 2,4 – –
3 4.25 4.5 2.50 3.1 4.50 @ 3.1 1.50 2.1 4.25 6.8 4.25 10.5
88,9 108 2,0 64 1,4 114 1,4 38 1,0 108 3,0 108 4,8
3¹⁄₂ 4.50 5.6 2.75 4.3 2.50 sw 4.0 1.75 sw 2.7 4.50 sw 7.9 4.50 11.5
101,6 114 2,5 70 2,0 64 1,8 44 1,2 114 3,6 114 5,2
4 5.00 7.1 3.00 5.6 2.88 5.6 1.75 3.6 5.00 11.9 5.00 15.8
114,3 127 3,2 76 2,5 73 2,5 44 1,6 127 5,4 127 7,2
4¹⁄₄ O.D. 5.00 11.0 3.00 5.6 – – – – 5.00 15.5 – –
108,0 127 5,0 76 2,5 – – – – 127 7,0 – –
4¹⁄₂ 5.25 sw 10.0 3.13 sw 6.0 3.50 6.6 1.88 sw 4.2 5.25 sw 15.0 5.25 18.5
127,0 133 4,5 79 2,7 89 3,0 48 1,9 133 6,8 133 8,4
5 5.50 11.7 3.25 8.3 2.88 sw 7.8 2.00 sw 5.0 5.50 17.8 5.50 20.0
141,3 140 5,3 83 3,8 73 3,5 51 2,2 140 8,1 140 9,1
5¹⁄₄ O.D. 5.50 11.7 3.25 8.3 – – – – 5.50 17.8 – –
133,0 140 5,3 83 3,8 – – – – 140 8,1 – –
5¹⁄₂ O.D. 5.50 11.7 3.25 8.3 – – – – 5.50 17.8 – –
139,7 140 5,3 83 3,8 – – – – 140 8,1 – –
6 6.50 17.2 3.50 10.8 6.25 @ 12.2 2.00 7.0 6.50 25.7 6.50 28.0
168,3 165 7,8 89 4,9 159 5,5 51 3,2 165 1,7 165 12,7
6¹⁄₄ O.D. 6.50 18.6 3.50 10.8 – – – – 6.50 27.1 – –
159,0 165 8,4 89 4,9 – – – – 165 12,3 – –
6¹⁄₂ O.D. 6.50 15.5 3.50 9.8 3.13 11.4 2.00 7.4 6.50 22.0 6.50 28.0
165,1 165 7,0 89 4,4 79 5,2 51 3,4 165 10,0 165 12,7
8 7.75 29.9 4.25 20.4 7.75 @ 20.0 2.00 10.1 7.75 47.6 7.75 48.0
219,1 197 13,6 108 9,3 197 9,1 51 4,6 197 21,6 197 21,8
10 9.00 63.3 4.75 37.5 4.38 sw 30.0 2.13 sw 11.8 9.00 99.0 9.00 121.5
273,0 229 28,7 121 17,0 111 13,6 54 5,3 229 44,9 229 55,1
12 10.00 74.0 5.25 66.7 4.88 sw 40.0 2.25 sw 29.3 10.00 133.0 10.00 110.0
323,9 254 33,6 133 30,3 124 18,1 57 13,3 254 60,3 254 49,9
14 # 21.00 164.0 8.75 82.0 5.00 sw 46.0 3.50 sw 32.0 11.00 sw 151.0 11.00 198.0
355,6 533 74,4 222 37,2 127 20,9 89 14,5 279 68,5 279 89,8
16 # 24.00 210.0 10.00 100.0 5.00 sw 58.0 4.00 sw 42.0 12.00 sw 188.0 12.00 250.0
406,4 610 95,3 254 45,4 127 26,3 102 19,1 305 85,3 305 113,4
18 # 27.00 273.0 11.25 135.0 5.50 sw 65.0 4.50 sw 53.2 15.50 sw 263.0 15.50 350.0
457,0 686 123,8 286 61,2 140 29,5 114 24,1 394 119,3 394 158,8
20 # 30.00 343.0 12.50 174.0 6.00 sw 78.6 5.00 sw 65.0 17.25 sw 339.0 17.25 452.0
508,0 762 155,6 318 78,9 152 36,0 127 29,5 438 153,8 438 205,0
24 # 36.00 516.0 15.00 251.0 7.00 sw 140.0 6.00 sw 60.0 20.00 sw 473.0 20.00 795.0
610,0 914 234,1 381 113,9 178 63,5 152 27,2 508 214,5 508 360,6
# 14", 16", 18", 20", 24" (355,6 - 610,0 mm) elbows (90°, 45°) are 1 ¹⁄₂ D long radius forged steel elbows No. 100 and No. 110. See page 5.
For 1D radius elbows contact Victaulic.
(sw) Segmentally welded steel
@ Gooseneck design, end-to-end dimension

07.01 - 3
 07.01-3A
No. 33 SIZE Dimensions Approx. SIZE Dimensions Approx.
Inches/mm Wgt. Ea. Inches/mm Wgt. Ea.
True Wye Nominal Nominal
(Segmentally welded steel) Inches Lbs. Inches Lbs.
Actual mm C to LE C to SE kg Actual mm C to LE C to SE kg
1 2.25 2.25 1.1 6 6.50 4.50 22.3
33,7 57 57 0,5 168,3 165 114 10,1
C to LE 1¹⁄₄ 2.75 2.50 1.5 8 7.75 6.00 36.0
42,4 70 64 0,7 219,1 197 152 16,3
1¹⁄₂ 2.75 2.75 1.8 10 9.00 6.50 69.9
48,3 70 70 0,8 273,0 229 155 31,7
2 3.25 2.75 2.5 12 10.00 7.00 80.0
C to 60,3 83 70 1,1 323,9 254 178 36,3
SE
2¹⁄₂ 3.75 3.00 4.3 14 11.00 7.50 134.2
73,0 95 76 2,0 355,6 279 191 60,8
3 4.25 3.25 6.1 16 12.00 8.00 167.0
88,9 108 83 2,8 406,4 305 203 75,7
3¹⁄₂ 4.50 3.50 9.6 18 15.50 8.50 234.0
101,6 114 89 4,4 457,0 394 216 106,1
4 5.00 3.75 10.0 20 17.25 9.00 281.0
114,3 127 95 4,5 508,0 438 229 127,5
5 5.50 4.00 15.0 24 20.00 10.00 523.0
141,3 140 102 6,8 610,0 508 254 237,2

07.01-4B
No. 29M SIZE Dimensions Approx. SIZE Dimensions Approx.
Nominal Inches/mm Wgt. Ea. Nominal Inches/mm Wgt. Ea.
Tee with Lbs. Lbs.
Inches Inches
Threaded Branch Actual mm C to GE C to TE kg Actual mm C to GE C to TE kg
(Ductile Iron) ³⁄₄ 2.25 2.25 0.6 4¹⁄₂ 5.25 5.25 15.0 sw
26,9 57 57 0,3 127,0 133 133 6,8
C to 1 2.25 2.25 1.0 5 5.50 5.50 17.8 sw
GE 33,7 57 57 0,5 141,3 140 140 8,1
1¹⁄₄ 2.75 2.75 1.5 5¹⁄₄ O.D. 5.50 5.50 17.8
42,4 70 70 0,7 133,0 140 140 8,1
1¹⁄₂ 2.75 2.75 2.0 5¹⁄₂ O.D. 5.50 5.50 17.8
C to TE 48,3 70 70 0,9 139,7 140 140 8,1
2 3.25 4.25 3.0 6 6.50 6.50 25.7 sw
60,3 83 108 1,4 168,3 165 165 11,7
2¹⁄₂ 3.75 3.75 4.3 6¹⁄₄ O.D. 6.50 6.50 27.1
73,0 95 95 2,0 159,0 165 165 12,3
3 O.D. 3.75 3.75 5.2 6¹⁄₂ O.D. 6.50 6.50 22.0
76,1 95 95 2,4 165,1 165 165 10,0
3 4.25 6.00 6.8 8 7.75 7.75 47.6 sw
88,9 108 152 3,1 219,1 197 197 21,6
3¹⁄₂ 4.50 4.50 7.9 sw 10 9.00 9.00 73.0
101,6 114 114 3,6 273,0 229 229 33,1
4 5.00 7.25 11.9 12 10.00 10.00 99.0
114,3 127 184 5,4 323,9 254 254 44,9
4¹⁄₄ O.D. 5.00 5.00 15.5
108,0 127 127 7,0
(sw) Segmentally welded steel.

07.01 - 4
 07.01-5B
No. 100 and No. 100 – 90° No. 110 – 45° No. 100 – 90° No. 110 – 45°
No. 110 SIZE Aprx. Aprx. SIZE Aprx. Aprx.
Nominal C to E Weight C to E Weight Nominal C to E Weight C to E Weight
Long Radius Elbows Inches Inches Each Inches Each Inches Inches Each Inches Each
1¹⁄₂ D Actual mm mm Lbs./kg mm Lbs./kg Actual mm mm Lbs./kg mm Lbs./kg
2 4.38 2.5 2.75 1.8 10 17.25 107.0 8.50 57.0
60,3 111 1,1 70 0,8 273,0 438 48,5 216 25,9
C to E
2¹⁄₂ s 5.00 4.1 3.00 2.8 12 20.50 156.0 10.00 90.0
73,0 127 1,9 76 1,3 323,9 521 70,8 254 40,8
C to E 3 5.88 6.0 3.38 4.9 14 21.00 s 164.0 8.75 s 82.0
88,9 149 2,7 86 2,2 355,6 533 74,4 222 37,2
4 7.50 12.3 4.00 7.3 16 24.00 s 210.0 10.00 s 100.0
114,3 191 5,6 102 3,3 406,4 610 95,3 254 45,4
5s + 18.2 + 14.8 18 27.00 s 273.0 11.25 s 135.0
141,3 + 8,3 + 6,7 457,0 686 123,8 286 61,2
No. 100 No. 110 6 10.75 30.4 5.50 17.4 20 30.00 s 343.0 12.50 s 174.0
168,3 273 13,8 140 7,9 508,0 762 155,6 318 78,9
6¹⁄₂ O.D. 10.75 29.0 5.50 19.0 24 36.00 s 516.0 15.00 s 251.0
165,1 273 13,2 140 8,6 610,0 914 234,1 381 113,9
8 14.25 66.0 7.25 36.0
219,1 362 30,0 184 16,3
Ductile iron except those marked (s) which are steel.
NOTE: Fittings size 26 - 48" are available roll grooved for installation with Style 770 Large Diameter couplings. Contact Victaulic for
details.

07.01-6A

No. 100 and Wall Thickness 90° Elbow 45° Elbow

Inches/millimeters No. 100 – 3D No. 110 – 3D
No. 110 SIZE
In At C to E Aprx. Weight C to E Aprx. Weight
Nominal
Long Radius Elbows Inches Non-critical Back Wear Inches Each Inches Each
3D Actual mm Area Area Extra mm Lbs./kg mm Lbs./kg
(With added wall thickness at 2 0.184 0.309 0.125 10.00 5.0 6.50 4.7
60,3 4,67 7,85 3,18 254 2,3 165 2,1
bend for abrasive service)
3 0.246 0.371 0.125 13.00 16.0 7.75 10.4
88,9 6,25 9,42 3,18 330 7,3 197 4,7
C to E
4 0.267 0.455 0.188 16.00 25.5 9.00 17.2
114,3 6,78 11,56 4,78 406 11,6 229 7,8
6 0.310 0.560 0.250 24.00 70.0 13.50 45.0
168,3 7,87 14,22 6,35 610 31,8 343 20,4

C to E

No. 100 No. 110

07.01-24A

No. 100, No. 110 SIZE No. 100 – 90° No. 110 – 45° No. 20 – Tee
Nominal
and No. 20 Inches C-E Aprx. Wgt. Ea. C-E Aprx. Wgt. Ea. C-E Aprx. Wgt. Ea.
Actual mm In./mm Lbs./kg In./mm Lbs./kg In./mm Lbs./kg
Direct Grooved 28 42.00 626.0 17.25 312.0 24.00 790.0
Fittings 1¹⁄₂ D Radius 711,0 1067 284 438 142 610 358
30 45,00 775.0 18.50 358.0 25.00 1000.0
C to E 762,0 1168 352 470 162 635 454
36 54.00 1170.0 22.25 583.0 30.00 1450.0
C to E 914,0 1372 531 565 265 762 658
42 63.00 1810.0 26.00 900.0 35.00 2000.0
1067,0 1600 821 660 408 889 907
Ductile iron available. Contact Victaulic for sizes, dimensions and availability.
For use with Style 77 couplings.

No. 100 No. 110

C to E

C
to
E

No. 20

07.01 - 5
 07.01-7B
No. 30 Dimensions Dimensions
45° Lateral SIZE Inches/mm Approx. SIZE Inches/mm Approx.
Nominal Wgt. Ea. Nominal Wgt. Ea.
(Segmentally welded steel) Lbs. Lbs.
Inches Inches
Actual mm C to LE C to SE kg Actual mm C to LE C to SE kg
³⁄₄ 4.50 2.00 1.0 6 14.00 4.50 43.6
26,9 114 51 0,5 168,3 356 114 19,8
1 5.00 2.25 1.7 6¹⁄₂ O.D. 14.00 4.50 43.6
C to 33,7 127 57 0,8 165,1 356 114 19,8
LE 1¹⁄₄ 5.75 2.50 2.5 d 8 18.00 6.00 72.0
42,4 146 64 1,1 219,1 457 152 32,7
LE

1¹⁄₂ 6.25 2.75 3.5 10 20.50 6.50 105.0

to

C to
C

48,3 159 70 1,6 273,0 521 165 47,6

SE
2 7.00 2.75 4.6 d 12 23.00 7.00 165.0
60,3 178 70 2,1 323,9 584 178 74,8
2¹⁄₂ 7.75 3.00 9.0 14 26.50 7.50 276.0
73,0 197 76 4,1 355,6 673 191 125,2
3 O.D. 8.50 3.25 11.0 16 29.00 8.00 344.2
76,1 216 83 5,0 406,4 737 203 156,1
3 8.50 3.25 11.7 d 18 32.00 8.50 429.0
88,9 216 83 5,4 457,0 813 216 194,6
3¹⁄₂ 10.00 3.50 17.8 20 35.00 9.00 500.0
101,6 254 89 8,1 508,0 889 229 226,8
4 10.50 3.75 22.2 d 24 40.00 10.00 715.0
114,3 267 95 10,1 610,0 1016 254 324,3
5 12.50 4.00 21.8
141,3 318 102 9,9
(d) Ductile iron.

07.01-8B

No. 60 Cap No. 60 No. 40, 42, 43 # No. 60 No. 40, 42, 43 #
Cap* Nipple (Steel) Cap* Nipple (Steel)
No. 40, 42, 43
SIZE Thick. Aprx. Aprx. SIZE Thick. Aprx. Aprx.
Nipple Nominal T Wgt. Ea. E to E Wgt. Ea. Nominal T Wgt. Ea. E to E Wgt. Ea.
(Steel) Inches Inches Lbs. Inches Lbs. Inches Inches Lbs. Inches Lbs.
Actual mm mm kg mm kg Actual mm mm kg mm kg
E to E ³⁄₄ 0.88 0.2 3.00 0.3 5¹⁄₄ O.D. 1.00 4.5 – –
T 26,9 22 0,1 76 0,1 133,0 25 2,0 – –
1 0.88 0.3 3.00 0.4 5¹⁄₂ O.D. 1.00 4.5 – –
33,7 22 0,1 76 0,2 139,7 25 2,0 – –
1¹⁄₄ 0.88 0.3 4.00 0.8 6 1.00 6.1 6.00 9.5
No. 60 No. 42 42,4 22 0,1 102 0,4 168,3 25 2,8 152 4,3
Grv. ✕ Bev. 1¹⁄₂ 0.88 0.5 4.00 0.9 6¹⁄₄ O.D. 1.00 6.8 – –
48,3 22 0,2 102 0,4 159,0 25 3,1 – –
E to E E to E 2 0.88 0.6 4.00 1.2 6¹⁄₂ O.D. 1.00 7.3 – –
60,3 22 0,3 102 0,5 165,1 25 3,3 – –
2¹⁄₂ 0.88 1.0 4.00 1.9 8 1.19 13.1 6.00 14.2
73,0 22 0,5 102 0,9 219,1 30 5,9 152 6,4
3 O.D. 0.88 1.2 – – 10 1.25 21.0 8.00 27.0
No. 43 No. 40 76,1 22 0,5 – – 273,0 32 9,5 203 12,2
Grv. ✕ Grv. Grv. ✕ Thd. 3 0.88 1.2 4.00 2.5 12 1.25 35.6 8.00 33.0
88,9 22 0,5 102 1,1 323,9 32 16,2 203 15,0
3¹⁄₂ 0.88 2.5 4.00 2.1 14 9.50 * – –
101,6 22 1,1 102 0,9 355,6 241 * – –
4 1.00 2.5 6.00 5.5 16 10.00 * – –
114,3 25 1,1 152 2,5 406,4 254 * – –
4¹⁄₄ O.D. 1.00 2.3 – – 18 11.00 * – –
108,0 25 1,0 – – 457,0 279 * – –
4¹⁄₂ 1.00 2.5 – – 20 12.00 * – –
127,0 25 1,1 – – 508,0 305 * – –
5 1.00 4.6 6.00 7.4 24 * * – –
141,3 25 2,1 152 3,4 610,0 * * – –
# For Pump Package Nipples with 1¹⁄₂" (48,3 mm) hole cut to receive Style 923 Vic-Let ™ or Style 924 Vic-O-Well™ request special No.
40, 42 or 43 nipple prices and request No. 40-H, 42-H or 43-H on order. NOTE: 4" - 12" (114,3 - 323,9 mm) diameter - 8" (219,1 mm)
minimum length required.
@ Available with British Standard Pipe Threads, specify “BSP” clearly on order.
* Steel dish caps available through 24" (610,0 mm), contact Victaulic. No. 60 cap is not suitable for use in vacuum service with Style
72 or 750 couplings. No. 61 Bull Plugs should be used.

07.01 - 6
 07.01-9A
No. R-10 SIZE Dimensions Approx. Wgt. Ea.
Reducing Base Nominal Inches/millimeters Lbs./kg
Inches
Support Elbows Actual mm C to E H B Dia. G✕G G✕F
(Ductile Iron) 6 ✕ 4 9.00 1.25 1.50 19.0 33.0
168,3 ✕ 114,3 229 32 38 8,6 15,0
C to E ✕ 5 9.00 1.50 1.50 23.0 38.0
✕ 141,3 229 38 38 10,4 17,2
8 ✕ 6 10.50 2.13 1.50 33.0 52.0
219,1 ✕ 168,3 267 54 38 15,0 23,6
10 ✕ 8 12.00 2.40 1.50 61.0 88.0
H 273,0 ✕ 219,1 305 61 38 27,7 39,9

B Dia.
Grooved ✕ Grooved (G ✕ G)

C to E

B Dia.
Grooved ✕ Flanged (G ✕ F)

07.01-10A
No. 41 – ANSI 125 SIZE Length Approx. Weight Each SIZE Length Approx. Weight Each
(Cast Iron) Nominal E to E Lbs./kg Nominal E to E Lbs./kg
Inches Inches No. 41 No. 45 No. 46 Inches Inches No. 41 No. 45 No. 46
No. 45 – ANSI 150 Actual mm mm ANSI 125 ANSI 150 ANSI 300 Actual mm mm ANSI 125 ANSI 150 ANSI 300
(Steel)
³⁄₄ 3 – 2.3 3.3 6 6 26.5 27.5 47.5
No. 46 – ANSI 300 26,9 76 – 1,0 1,5 168,3 152 12,0 12,5 21,5

(Steel) 1 3 2.5 2.7 3.9 8 6 39.0 41.3 70.3

33,7 76 1,1 1,2 1,8 219,1 152 17,7 18,8 31,9
Flanged Adapter 1¹⁄₄ 4 3.0 3.3 4.8 10 8 57.0 59.8 100.8
42,4 102 1,4 1,5 2,2 273,0 203 25,9 27,1 45,7
Nipples 1¹⁄₂ 4 3.5 3.9 6.9 12 8 41.0 88.2 146.2
48,3 102 1,6 1,8 3,1 323,9 203 18,6 40,0 66,3
E to E 2 4 5.5 6.2 8.2 14 8 –
60,3 102 2,5 2,8 3,7 355,6 203 – + +
2¹⁄₂ 4 8.0 9.9 11.9 16 8 –
73,0 102 3,6 4,5 5,4 406,4 203 – + +
3 4 9.5 11.4 16.5 18 8 –
88,9 102 4,3 5,2 7,5 457,0 203 – + +
3¹⁄₂ 4 12.0 15.1 20.1 20 8 –
101,6 102 5,4 6,8 9,1 508,0 203 – + +
4 6 16.7 18.4 27.4 24 8 –
114,3 152 7,6 8,3 12,4 610,0 203 – + +
5 6 21.5 21.3 35.3
141,3 152 9,8 9,7 16,0
+ Contact Victaulic for details.

07.01 - 7
 E
to E
Concentric/Eccentric Reducers E to E
Steel (except as noted)

07.01-11C
No. 50 No. 51 No. 50 No. 51
SIZE Approx. Approx. SIZE Approx. Approx.
Nominal E to E Wgt. Ea. E to E Wgt. Ea. Nominal E to E Wgt. Ea. E to E Wgt. Ea.
Inches Inches Lbs. Inches Lbs. Inches Inches Lbs. Inches Lbs.
Actual mm mm kg mm kg Actual mm mm kg mm kg
1¹⁄₄ ✕ ³⁄₄ + 1.9 – – 6 ✕ 1 4.00* d 5.0 11.50 14.5
42,4 ✕ 26,9 + 0,9 – – 168,3 ✕ 33,7 102 2,3 292 6,6
✕ 1 + 1.9 – – ✕ 1¹⁄₂ + 5.5 + +
✕ 33,7 + 0,9 – – ✕ 48,3 + 2,5 + +
1¹⁄₂ ✕ ³⁄₄ + 1.4 – – ✕ 2 4.00* d 6.6 11.50 14.5
48,3 ✕ 26,9 + 0,6 – – ✕ 60,3 102 3,0 292 6,6
✕ 1 2.50* d 0.8 8.50 4.5 ✕ 2¹⁄₂ 4.00* d 6.4 11.50 14.2
✕ 33,7 64 0,4 216 2,0 ✕ 73,0 102 2,9 292 6,4
✕ 1¹⁄₄ 2.50* d 1.0 – – ✕ 3 4.00* d 6.4 5.50 d 15.0
✕ 42,4 64 0,5 – – ✕ 88,9 102 2,9 140 6,8
2 ✕ ³⁄₄ 2.50* d 0.9 9.00 2.0 ✕ 4 4.00 d 6.5 5.50 d 17.0
60,3 ✕ 26,9 64 0,3 229 0,9 ✕ 114,3 102 2,9 140 7,7
✕ 1 2.50* d 0.7 9.00 2.3 ✕ 5 4.00 d 6.4 5.50 d 17.0
✕ 33,7 64 0,3 229 1,0 ✕ 141,3 102 2,9 140 7,7
✕ 1¹⁄₄ 2.50* d 1.2 9.00 4.6 8 ✕ 2¹⁄₂ 16.00* 7.9 12.00 26.1
✕ 42,4 64 0,5 229 2,1 219,1 ✕ 73,0 406 3,6 305 11,8
✕ 1¹⁄₂ 2.50* d 1.0 9.00 4.6 ✕ 3 5.00 d 9.3 12.00 22.0
✕ 48,3 64 0,5 229 2,1 ✕ 88,9 127 4,2 305 10,0
2¹⁄₂ ✕ ³⁄₄ + 1.3 + 3.3 ✕ 4 5.00 d 10.4 12.00 23.0
73,0 ✕ 26,9 + 0,6 + 1,5 ✕ 114,3 127 4,8 305 10,4
✕ 1 2.50 3.6 9.50 3.5 ✕ 5 5.00 d 11.6 12.00 23.0
✕ 33,7 64 1,5 241 1,6 ✕ 141,3 127 5,2 305 10,4
✕ 1¹⁄₄ 2.50* d 3.3 9.50 + ✕ 6 5.00 d 11.9 6.00 d 24.0
✕ 42,4 64 1,5 241 + ✕ 168,3 127 5,4 152 10,9
✕ 1¹⁄₂ 2.50* d 3.6 9.50 3.7 10 ✕ 4 6.00 d 19.7 13.00 32.0
✕ 48,3 64 1,6 241 1,7 273,0 ✕ 114,3 152 8,9 330 14,5
✕ 2 2.50 d 3.9 9.50 4.3 ✕ 5 + 34.3 + 34.6
✕ 60,3 64 1,8 241 2,0 ✕ 141,3 + 15,6 + 15,7
3 ✕ ³⁄₄ + 1.5 + 4.5 ✕ 6 6.00 d 20.0 13.00 36.9
88,9 ✕ 26,9 + 0,7 + 2,0 ✕ 168,3 152 9,1 330 16,7
✕ 1 2.50* d 1.3 9.50 4.8 ✕ 8 6.00 d 22.0 7.0 d 21.6
✕ 33,7 64 0,6 241 2,2 ✕ 219,1 152 10,0 178 9,8
✕ 1¹⁄₄ + 3.0 + 4.8 12 ✕ 4 + 44.0 14.00 48.0
✕ 42,4 + 1,4 + 2,2 323,9 ✕ 114,3 + 20,0 356 21,8
✕ 1¹⁄₂ 2.50* d 5.1 9.50 5.1 ✕ 6 7.00 d 24.6 14.00 50.0
✕ 48,3 64 2,3 241 2,3 ✕ 168,3 178 11,2 356 22,7
✕ 2 2.50* d 1.6 3.50 d 6.0 ✕ 8 7.00 d 52.0 14.00 53.5
✕ 60,3 64 0,7 89 2,7 ✕ 219,1 178 23,6 356 24,3
✕ 2¹⁄₂ 2.50* d 1.8 3.50 d 7.0 ✕ 10 7.00 d 39.0 14.00 57.0
✕ 73,0 64 0,8 89 3,2 ✕ 273,0 178 17,7 356 25,9
3 O.D. 2.50 d 2.1 – – 14 ✕ 6 13.00 65.0 13.00 60.0
✕ 76,1 64 1,0 – – 355,6 ✕ 168,3 330 29,5 330 27,2
3¹⁄₂ ✕ 3 2.50 d 2.0 9.50 7.0 ✕ 8 13.00 65.0 13.00 60.0
101,6 ✕ 88,9 64 0,9 241 3,2 ✕ 219,1 330 29,5 330 27,2
4 ✕ 1 3.00* d 3.0 10.00 6.5 ✕ 10 13.00 66.0 13.00 65.0
114,3 ✕ 33,9 76 1,4 254 2,9 ✕ 273,0 330 29,9 330 29,5
✕ 1¹⁄₄ + 4.6 – – ✕ 12 13.00 68.0 13.00 66.0
✕ 42,7 + 2,1 – – ✕ 323,9 330 30,8 330 29,9
✕ 1¹⁄₂ 10.00 6.9 10.00 8.1 16 ✕ 8 14.00 73.0 14.00 73.0
✕ 48,4 254 3,1 254 3,7 406,4 ✕ 219,1 356 33,1 355 33,1
✕ 2 3,00* d 2.4 4.00 d 3.3 ✕ 10 14.00 73.0 14.00 73.0
✕ 60,3 76 1,1 102 1,5 ✕ 273,0 356 33,1 355 33,1
✕ 2¹⁄₂ 3.00* d 2.7 4.00 d 3.4 ✕ 12 14.00 73.0 14.00 73.0
✕ 73,0 76 1,2 102 1,5 ✕ 323,9 356 33,1 355 33,1
✕ 3 3.00* d 3.2 4.00 d 3.5 ✕ 14 14.00 73.0 14.00 73.0
✕ 88,9 76 1,4 102 1,6 ✕ 355,6 356 33,1 355 33,1
✕ 3¹⁄₂ 3.00 d 2.9 10.00 8.0 18 ✕ 10 15.00 91.0 15.00 91.0
✕ 101,6 76 1,3 254 3,6 457,0 ✕ 273,0 381 41,3 381 41,3
5 ✕ 2 4.00 9.0 11.00 5.2 ✕ 12 15.00 91.0 15.00 91.0
141,3 ✕ 60,3 102 4,1 279 2,4 ✕ 323,9 381 41,3 381 41,3
✕ 2¹⁄₂ 11.00 11.0 11.00 10.8 ✕ 14 15.00 91.0 15.00 91.0
✕ 73,0 279 5,0 279 4,9 ✕ 355,6 381 41,3 381 41,3
✕ 3 4.00 d 5.5 11.00 11.1 ✕ 16 15.00 91.0 15.00 91.0
✕ 88,9 102 2,5 279 5,0 ✕ 406,4 381 41,3 381 41,3
✕ 4 3.50 d 4.3 5.00 d 12.0 Table continued on page 9.
✕ 114,3 89 1,9 127 5,4
(d) Ductile iron + Contact Victaulic for details.
*Available with male threaded small end No. 52.
@ Steel eccentric reducers available through 30" (762,0 mm), contact Victaulic for dimensions.

07.01 - 8
 E
to E
Concentric/Eccentric Reducers E to E
Steel (except as noted)

07.01-11C
No. 50 No. 51 No. 50 No. 51
SIZE Approx. Approx. SIZE Approx. Approx.
Nominal E to E Wgt. Ea. E to E Wgt. Ea. Nominal E to E Wgt. Ea. E to E Wgt. Ea.
Inches Inches Lbs. Inches Lbs. Inches Inches Lbs. Inches Lbs.
Actual mm mm kg mm kg Actual mm mm kg mm kg
20 ✕ 10 20.00 110.0 20.00 177.0 24 ✕ 12 20.00 150.0 20.00 150.0
508,0 ✕ 273,0 508 49,9 508 80,3 610,0 ✕ 323,9 508 68,0 508 68,0
✕ 12 20.00 120.0 20.00 120.0 ✕ 14 20.00 162.0 20.00 162.0
✕ 323,9 508 54,4 508 54,4 ✕ 355,6 508 73,5 508 73,5
✕ 14 20.00 149.0 20.00 149.0 ✕ 16 20.00 162.0 20.00 162.0
✕ 355,6 508 67,9 508 67,9 ✕ 406,4 508 73,5 508 73,5
✕ 16 20.00 120.0 20.00 120.0 ✕ 18 20.00 162.0 20.00 162.0
✕ 406,4 508 54,4 508 54,4 ✕ 457,0 508 73,5 508 73,5
✕ 18 20.00 136.0 20.00 136.0 ✕ 20 20.00 151.0 20.00 190.0
✕ 457,0 508 61,7 508 61,7 ✕ 508,0 508 68,5 508 86,2
24 ✕ 10 20.00 142.0 20.00 142.0
610,0 ✕ 273,0 508 64,4 508 64,4

C to E C to E

C C
No. 25 and No. 29 Reducing Tees to
E
to
E
(Segmentally welded steel)
No. 25 No. 29
07.01-12D 07.01-12D

No. 25 No. 29 No. 25 No. 29

SIZE Std. w/Thd. Branch Aprx. SIZE Std. w/Thd. Branch Aprx.
Nominal Inches C to E C to E Wgt. Ea. Nominal Inches C to E C to E Wgt. Ea.
Actual mm Inches/mm Inches/mm Lbs/kg Actual mm Inches/mm Inches/mm Lbs/kg
1 ✕ 1 ✕ ³⁄₄ + + 1.0 4 ✕ 4 ✕ ³⁄₄ + + 8.0
33,7 ✕ 33,7 ✕ 26,9 + + 0,5 114,3 ✕ 114,3 ✕ 26,9 + + 3,6
1¹⁄₄ ✕ 1¹⁄₄ ✕ 1 + + 1.3 ✕ 1 5.00 d 5.00 d 7.8
42,4 ✕ 42,4 ✕ 33,7 + + 0,6 ✕ 33,7 127 127 3,5
1¹⁄₂ ✕ 1¹⁄₂ ✕ ³⁄₄ + + 1.5 ✕ 1¹⁄₄ + + 9.6
48,3 ✕ 48,3 ✕ 26,9 + + 0,7 ✕ 42,4 + + 4,4
✕ 1 + + 1.5 ✕ 1¹⁄₂ 5.00 d 5.00 d 10.2
✕ 33,7 + + 0,7 ✕ 48,3 127 127 4,6
✕ 1¹⁄₄ + + 1.7 ✕ 2 5.00 d 5.00 d 11.2
✕ 42,4 + + 0,8 ✕ 60,3 127 127 5,1
2 ✕ 2 ✕ ³⁄₄ 3.25 d 3.25 d 2.5 ✕ 2¹⁄₂ 5.00 d 5.00 d 11.4
60,3 ✕ 60,3 ✕ 26,9 83 83 1,1 ✕ 73,0 127 127 5,2
✕ 1 3.25 d 3.25 d 2.7 ✕ 3 5.00 d 5.00 d 11.6
✕ 33,7 83 83 1,2 ✕ 88,9 127 127 5,3
✕ 1¹⁄₄ + + 1.8 5✕5 ✕ 1 + + 14.0
✕ 42,4 + + 0,8 141,3 ✕ 141,3 ✕ 33,7 + + 6,4
✕ 1¹⁄₂ 3.25 d 3.25 3.0 ✕ 1¹⁄₂ + + 14.3
✕ 48,3 83 83 1,4 ✕ 48,3 + + 6,5
2¹⁄₂ ✕ 2¹⁄₂ ✕ ³⁄₄ + + 3.9 ✕ 2 5.50 5.50 14.5
73,0 ✕ 73,0 ✕ 26,9 + + 1,8 ✕ 60,3 140 140 6,6
✕ 1 3.75 d 3.75 3.8 ✕ 2¹⁄₂ 5.50 d 5.50 d 15.2
✕ 33,7 95 95 1,7 ✕ 73,0 140 140 6,9
✕ 1¹⁄₄ + + 4.2 ✕ 3 5.50 d 5.50 16.6
✕ 42,4 + + 1,9 ✕ 88,9 140 140 7,5
✕ 1¹⁄₂ 3.75 d 3.75 d 3.9 ✕ 4 5.50 d 5.50 16.7
✕ 48,3 95 95 1,8 ✕ 114,3 140 140 7,6
✕ 2 3.75 d 3.75 4.5 6✕6 ✕ 1 + + 23.0
✕ 60,3 95 95 2,0 168,3 ✕ 168,3 ✕ 33,7 + + 10,4
3 ✕ 3 ✕ ³⁄₄ + + 5.7 ✕ 1¹⁄₂ + + 24.0
88,9 ✕ 88,9 ✕ 26,9 + + 2,6 ✕ 48,3 + + 10,9
✕ 1 4.25 d 4.25 d 6.1 ✕ 2 6.50 d 6.50 d 21.6
✕ 33,7 108 108 2,8 ✕ 60,3 165 165 9,8
✕ 1¹⁄₄ + + 8.0 ✕ 2¹⁄₂ 6.50 d 6.50 d 21.4
✕ 42,4 + + 3,6 ✕ 73,0 165 165 11,7
✕ 1¹⁄₂ 4.25 d 4.25 6.5 ✕ 3 6.50 d 6.50 d 26.5
✕ 48,3 108 108 2,9 ✕ 88,9 165 165 12,0
✕ 2 4.25 d 4.25 6.2 ✕ 4 6.50 d 6.50 d 25.0
✕ 60,3 108 108 2,8 ✕ 114,3 165 165 11,3
✕ 2¹⁄₂ 4.25 d 4.25 6.4 ✕ 5 6.50 d 6.50 d 23.2
✕ 73,0 108 108 2,9 ✕ 141,3 165 165 10,5
Table continued on page 10.

07.01 - 9
 C to E C to E
No. 25 and No. 29
Reducing Tees C C
(Segmentally welded steel) to to
E E

No. 25 No. 29
07.01-12C 07.01-12C

No. 25 No. 29 No. 25 No. 29

SIZE Std. w/Thd. Branch Aprx. SIZE Std. w/Thd. Branch Aprx.
Nominal Inches C to E C to E Wgt. Ea. Nominal Inches C to E C to E Wgt. Ea.
Actual mm Inches/mm Inches/mm Lbs/kg Actual mm Inches/mm Inches/mm Lbs/kg
6¹⁄₂ ✕ 6¹⁄₂ ✕ 3 6.50 d 6.50 24.0 14 ✕ 14 ✕ 10 11.00 11.00 120.0
165,1 ✕ 165,1 ✕ 88,9 165 165 10,9 355,6 ✕ 355,6 ✕ 273,0 279 279 54,4
✕ 4 6.50 d 6.50 25.0 ✕ 12 11.00 11.00 129.1
✕ 114,3 165 165 11,3 ✕ 323,9 279 279 58,6
8 ✕ 8 ✕ 1¹⁄₂ + + 33.0 16 ✕ 16 ✕ 4 + + 130.0
219,1 ✕ 219,1 ✕ 48,3 + + 15,0 406,4 ✕ 406,4 ✕ 114,3 + + 59,0
✕ 2 7.75 7.75 33.5 ✕ 6 + + 133.5
✕ 60,3 197 197 15,2 ✕ 168,3 + + 60,6
✕ 2¹⁄₂ + + 39.0 ✕ 8 12.00 12.00 145.0
✕ 73,0 + + 17,7 ✕ 219,1 305 305 65,8
✕ 3 7.75 7.75 33.6 ✕ 10 12.00 12.00 149.5
✕ 88,9 197 197 15,2 ✕ 273,0 305 305 67,8
✕ 4 7.75 d 7.75 d 41.8 ✕ 12 12.00 12.00 154.0
✕ 114,3 197 197 19,0 ✕ 323,9 305 305 69,9
✕ 5 7.75 7.75 34.0 ✕ 14 + + 167.0
✕ 141,3 197 197 15,4 ✕ 355,6 + + 75,8
✕ 6 7.75 d 7.75 d 42.3 18 ✕ 18 ✕ 4 + + 194.0
✕ 168,3 197 197 19,2 457,0 ✕ 457,0 ✕ 114,3 + + 88,0
6¹⁄₂ O.D. 7.75 7.75 48.0 ✕ 6 + + 200.0
✕ 165,1 197 197 21,8 ✕ 168,3 + + 90,7
10 ✕ 10 ✕ 1¹⁄₂ + + 62.0 ✕ 8 + + 202.0
273,0 ✕ 273,0 ✕ 48,3 + + 28,1 ✕ 219,1 + + 91,6
✕ 2 9.00 9.00 62.0 ✕ 10 15.50 15.50 212.0
✕ 60,3 229 229 28,1 ✕ 273,0 394 394 96,2
✕ 2¹⁄₂ + + 62.4 ✕ 12 15.50 15.50 222.6
✕ 73,0 + + 28,3 ✕ 323,9 394 394 101,0
✕ 3 + + 60.0 ✕ 14 15.50 – 230.1
✕ 88,9 229 229 27,2 ✕ 355,6 394 – 104,4
✕ 4 9.00 9.00 61.0 18 ✕ 18 ✕ 16 15.50 – 247.6
✕ 114,3 229 229 27,7 457,0 ✕ 457,0 ✕ 406,4 394 – 112,3
✕ 5 9.00 9.00 52.0 20 ✕ 20 ✕ 6 + + 240.0
✕ 141,3 229 229 23,6 508,0 ✕ 508,0 ✕ 168,3 + + 108,9
✕ 6 9.00 9.00 59.0 ✕ 8 + + 244.0
✕ 168,3 229 229 26,8 ✕ 219,1 + + 110,7
✕ 8 9.00 9.00 64.7 ✕ 10 + + 256.0
✕ 219,1 229 229 29,3 ✕ 273,0 + + 116,1
12 ✕ 12 ✕ 1 + + 77.0 ✕ 12 + + 264.0
323,9 ✕ 323,9 ✕ 33,7 + + 34,9 ✕ 323,9 + + 119,8
✕ 2 + + 80.0 ✕ 14 17.25 – 275.0
✕ 60,3 + + 36,3 ✕ 355,6 438 – 124,7
✕ 2¹⁄₂ + + 78.0 ✕ 16 17.25 – 288.6
✕ 73,0 + + 35,4 ✕ 406,4 438 – 130,9
✕ 3 10.00 10.00 82.0 ✕ 18 17.25 – 297.0
✕ 88,9 254 254 37,2 ✕ 457,0 438 – 134,7
✕ 4 10.00 10.00 80.0 24 ✕ 24 ✕ 8 20.00 20.00 340.0
✕ 114,3 254 254 36,3 610,0 ✕ 610,0 ✕ 219,1 508 508 154,2
✕ 5 10.00 10.00 75.0 ✕ 10 20.00 20.00 343.9
✕ 141,3 254 254 34,0 ✕ 273,0 508 508 156,0
✕ 6 10.00 10.00 75.0 ✕ 12 20.00 20.00 352.8
✕ 168,3 254 254 34,0 ✕ 323,9 508 508 160,0
✕ 8 10.00 10.00 80.0 ✕ 14 20.00 – 360.0
✕ 219,1 254 254 36,3 ✕ 355,6 508 – 163,3
✕ 10 10.00 10.00 84.0 ✕ 16 20.00 – 378.0
✕ 273,0 254 254 38,1 ✕ 406,4 508 – 171,5
14 ✕ 14 ✕ 4 + + 102.0 ✕ 18 20.00 – 380.0
355,6 ✕ 355,6 ✕ 114,3 + + 46,3 ✕ 457,0 508 – 172,4
✕ 6 + + 108.2 ✕ 20 20.00 – 373.0
✕ 168,3 + + 49,1 ✕ 508,0 508 – 169,2
✕ 8 11.00 11.00 112.0 (d) Ductile iron. + Contact Victaulic for details.
✕ 219,1 279 279 50,8 No. 29 Threaded Outlet Reducing Tees are supplied NPT and are available with British
Standard threads. For British Standard specify “BSP” clearly on order.

07.01 - 10
No. 52 07.01-13C

SIZE SIZE SIZE

Reducer Nominal E to E Aprx. Nominal E to E Aprx. Nominal E to E Aprx.
Threaded Inches In. Wgt. Ea. Inches In. Wgt. Ea. Inches In. Wgt. Ea.
Actual mm mm Lbs./kg Actual mm mm Lbs./kg Actual mm mm Lbs./kg
Small 1¹⁄₂ ✕ 1 2.50 0.8 3 ✕ ³⁄₄ + 1.5 s 5 ✕ 4 + 4.5
(Ductile Iron) 48,3 ✕ 33,7 64 0,4 88,9 ✕ 26,9 + 0,7 141,3 ✕ 114,3 + 2,0
✕ 1¹⁄₄ 2.50 0.9 ✕ 1 2.50 1.3 6 ✕ 1 4.00 5.5
E ✕ 42,4 64 0,4 ✕ 33,7 64 0,6 168,3 ✕ 33,7 102 2,5
to E 2 ✕ ³⁄₄ 2.50 0.9 ✕ 1¹⁄₂ 2.50 1.5 s ✕ 2 4.00 5.7
60,3 ✕ 26,9 64 0,4 ✕ 48,3 64 0,7 ✕ 60,3 102 2,6
✕ 1 2.50 0.7 3 ✕ 2 2.50 1.5 ✕ 2¹⁄₂ 4.00 5.8
✕ 33,7 64 0,3 88,9 ✕ 60,3 64 0,7 ✕ 73,0 102 2,6
✕ 1¹⁄₄ 2.50 1.2 ✕ 2¹⁄₂ 2.50 2.4 ✕ 3 4.00 5.8
✕ 42,4 64 0,5 ✕ 73,0 64 1,1 ✕ 88,9 102 2,6
✕ 1¹⁄₂ 2.50 1.0 4 ✕ 1 3.00 2.3 ✕ 4 + 6.5 s
✕ 48,3 64 0,5 114,3 ✕ 33,7 76 1,0 ✕ 114,3 + 2,9
2¹⁄₂ ✕ 1 + 1.0 s ✕ 1¹⁄₂ + 2.5 s ✕ 5 + 2.0 s
73,0 ✕ 33,7 + 0,5 ✕ 48,3 + 1,1 ✕ 141,3 + 0,9
✕ 1¹⁄₄ 2.50 1.2 s ✕ 2 3.00 2.6 8 ✕ 2 16.00 1.5
✕ 42,4 64 0,5 ✕ 60,3 76 1,2 219,1 ✕ 60,3 406 0,7
✕ 1¹⁄₂ 2.50 1.3 s ✕ 2¹⁄₂ 3.00 2.6 ✕ 2¹⁄₂ 16.00 1.7
✕ 48,3 64 0,6 ✕ 73,0 76 1,2 ✕ 73,0 406 0,8
✕ 2 3.00 1.4 ✕ 3 3.00 2.5
✕ 60,3 76 0,6 ✕ 88,9 76 1,1
(s) Steel. + Contact Victaulic for details.
Available with British Standard Pipe Threads, specify “BSP” clearly on order.

07.01-14B

No. 53, 54 & 55 SIZE Approx. SIZE Approx.

Nominal E to E Weight Each Nominal E to E Weight Each
Swaged Nipples* Inches Inches Lbs. Inches Inches Lbs.
(Steel) Actual mm mm kg Actual mm mm kg
2✕1 6.50 2.0 4 ✕ 2¹⁄₂ 9.00 7.5
60,3 ✕ 33,7 165 0,9 114,3 ✕ 73,0 229 3,4
E to E
✕ 1¹⁄₄ 6.50 2.0 ✕3 9.00 7.5
✕ 42,4 165 0,9 ✕ 88,9 229 3,4
✕ 1¹⁄₂ 6.50 2.0 ✕ 3¹⁄₂ 9.00 7.5
✕ 48,3 165 0,9 ✕ 101,6 229 3,4

No. 53 2¹⁄₂ ✕ 1 7.00 3.0 5✕2 11.00 11.5

73,0 ✕ 33,7 178 1,4 141,3 ✕ 60,3 279 5,2
✕ 1¹⁄₄ 7.00 3.0 ✕3 11.00 11.3
✕ 42,4 178 1,4 ✕ 88,9 279 5,1
E to E ✕ 1¹⁄₂ 7.00 3.0 ✕4 11.00 11.5
✕ 48,3 178 1,4 ✕ 114,3 279 5,2
✕2 7.00 3.0 6✕1 12.00 17.0
✕ 60,3 178 1,4 168,3 ✕ 33,7 305 7,7
3✕1 8.00 4.5 ✕ 1¹⁄₄ 12.00 17.0
No. 54 88,9 ✕ 33,7 203 2,0 ✕ 42,4 305 7,7
✕ 1¹⁄₄ 8.00 4.5 ✕ 1¹⁄₂ 12.00 17.2
✕ 42,4 203 2,0 ✕ 48,3 305 7,8
✕ 1¹⁄₂ 8.00 4.4 ✕2 12.00 17.4
E to E ✕ 48,3 203 2,0 ✕ 60,3 305 7,9
✕2 8.00 4.5 ✕ 2¹⁄₂ 12.00 17.4
✕ 60,3 203 2,0 ✕ 73,0 305 7,9
✕ 2¹⁄₂ 8.00 4.5 ✕3 12.00 17.4
✕ 73,0 203 2,0 ✕ 88,9 305 7,9
No. 55
3¹⁄₂ ✕ 3 8.00 6.8 ✕ 3¹⁄₂ 12.00 17.4
101,6 ✕ 88,9 203 3,1 ✕ 101,6 305 7,9
4✕1 9.00 7.5 ✕4 12.00 17.5
114,3 ✕ 33,7 229 3,4 ✕ 114,3 305 7,9
✕ 1¹⁄₄ 9.00 7.5 ✕ 4¹⁄₂ 12.00 17.5
✕ 42,4 229 3,4 ✕ 127,0 305 7,9
✕ 1¹⁄₂ 9.00 7.5 ✕5 12.00 17.5
✕ 48,3 229 3,4 ✕ 141,3 305 7,9
✕2 9.00 7.5 8✕6 + 20.0
✕ 60,3 229 3,4 219,1 ✕ 168,3 + 9,1
*Also available in threaded small end No. 54 or threaded large end No. 55.
+ Contact Victaulic for details.

07.01 - 11
 07.01-15D
No. 18 and 19 No. 18 No. 19
Adapter Elbows 90° Adapter Elbow @ 45° Adapter Elbow @
(Ductile iron) SIZE Approx. Approx.
Nominal C to GE C to TE Weight Each C to GE C to TE Weight Each
Inches Inches Inches Lbs. Inches Inches Lbs.
C to Actual mm mm mm kg mm mm kg
GE
³⁄₄ 2.25 2.25 0.5 1.50 1.50 0.5
26,9 57 57 0,2 38 38 0,2
1 2.25 2.25 0.5 1.75 1.75 0.6
33,7 57 57 0,2 44 44 0,3
C to
TE 1¹⁄₄ 2.75 2.75 0.9 1.75 1.75 0.6
42,4 70 70 0,4 44 44 0,3
1¹⁄₂ 2.75 2.75 1.1 1.75 1.75 0.9
No. 18 48,3 70 70 0,5 44 44 0,4
2 3.25 4.25 2.5 2.00 3.00 1.9
60,3 108 83 1,1 51 76 0,9
C to
GE 2¹⁄₂ 3.75 3.75 3.0 2.25 2.25 2.3
73,0 95 95 1,4 57 57 1,0
3 4.25 6.00 5.8 2.50 4.25 5.0
88,9 108 152 2,6 64 108 2,3
C to
TE 3¹⁄₂ 4.50 6.25 8.0 5.25 5.25 8.8
101,6 114 159 3,6 133 133 4,0
No. 19 4 5.00 7.25 12.0 3.00 5.25 8.8
114,3 127 184 5,4 76 133 4,0
6 6.50 6.50 17.6 3.50 3.50 12.7
168,3 165 165 8,0 89 89 5,8
@ Available with British Standard Pipe Threads, specify “BSP” clearly on order.
+ Contact Victaulic for details.

07.01-16A

No. 27 Approx
SIZE C to EOR C to EOB Weight Each
Standpipe Tee Nominal Inches Inches Inches Lbs.
(Ductile Iron) Actual mm mm mm kg
4 ✕ 4 ✕ 2¹⁄₂ 3.25 4.00 9.1
C to 114,3 ✕ 114,3 ✕ 73,0 83 102 4,1
EOB
6 ✕ 6 ✕ 2¹⁄₂ 3.25 5.13 14.8
168,3 ✕ 168,3 ✕ 73,0 83 130 6,7
Available with British Standard Pipe Threads, specify “BSP” clearly on order.
C to
EOR

No. 27

07.01-17A

No. 21 SIZE C to EOR C to EOB

Approx
Weight Each
Bullhead Tee Nominal Inches Inches Inches Lbs.
(Ductile Iron) Actual mm mm mm kg
5✕5✕8 7.75 5.50 28.7
C to 141,3 ✕ 141,3 ✕ 219,1 197 140 13,0
EOR 6✕6✕8 7.75 6.50 37.5
168,3 ✕ 168,3 ✕ 219,1 197 165 17,0

C to
EOB

No. 21

07.01 - 12
 07.01-18B
No. 61 Approx.
Bull Plug SIZE E to E Weight Each
Nominal Inches Inches Lbs.
(Steel) Actual mm mm kg
2 4.00 2.5
E to E 60,3 102 1,1
2¹⁄₂ 5.00 3.0
73,0 127 1,4
3 6.00 4.5
88,9 152 2,0
4 7.00 7.5
114,3 178 3,4
5 8.00 12.0
141,3 203 5,4
6 10.00 17.0
168,3 254 7,7
‡ Steel dish caps available through 24" (610,0 mm), contact Victaulic.
No. 60 cap is not suitable for use in vacuum service with Style 72 or 750 couplings.
No. 61 Bull Plugs should be used.

07.01-19A

No. 32 SIZE Dimensions – Inches/millimeters Approx.

Nominal Weight
Tee Wye Inches Each
(Segmentally welded steel) Actual mm G H E1 E2 Lbs./kg
2✕2 ✕ 2 2.75 7.00 9.00 4.63 6.4
60,3 ✕ 60,3 ✕ 60,3 70 178 229 118 2,9
2¹⁄₂ ✕ 2¹⁄₂ ✕ 2¹⁄₂ 3.00 7.75 10.50 5.75 11.5
73,0 ✕ 73,0 ✕ 73,0 76 197 267 146 5,2

H
3✕3 ✕ 3 3.25 8.50 11.50 6.50 14.3
E2 88,9 ✕ 88,9 ✕ 88,9 83 216 292 165 6,5
3¹⁄₂ ✕ 3¹⁄₂ ✕ 3¹⁄₂ 3.25 10.00 13.00 7.75 22.9
101,6 ✕ 101,6 ✕ 101,6 89 254 330 197 10,4

G
4✕4 ✕ 3 3.75 10.50 12.88 7.88 23.0
114,3 ✕ 114,3 ✕ 88,9 95 267 327 200 10,4
E1 ✕ 4 3.75 10.50 13.63 8.13 26.0
✕ 114,3 95 267 346 207 11,8
5✕5 ✕ 3 4.00 12.50 14.25 9.25 29.0
141,3 ✕ 141,3 ✕ 88,9 102 318 362 235 13,2
✕ 4 4.00 12.50 15.13 9.63 36.7
✕ 114,3 102 318 384 245 16,6
✕ 5 4.00 12.50 16.13 10.00 48.0
✕ 141,3 102 318 410 254 21,8
6✕6 ✕ 3 4.50 14.00 15.31 10.31 37.3
168,3 ✕ 168,3 ✕ 88,9 114 356 389 262 16,9
✕ 4 4.50 14.00 16.25 10.75 46.3
✕ 114,3 114 356 413 273 21,0
✕ 5 4.50 14.00 17.25 11.13 55.0
✕ 141,3 114 356 438 283 24,9
✕ 6 4.50 14.00 18.25 11.50 60.5
✕ 168,3 114 356 464 292 27,4
8✕8 ✕ 3 6.00 18.00 18.19 13.19 76.0
219,1 ✕ 219,1 ✕ 88,9 152 457 462 335 34,5
✕ 4 6.00 18.00 19.00 13.50 76.4
✕ 114,3 152 457 483 343 34,7
✕ 5 6.00 18.00 20.00 13.88 85.6
✕ 141,3 152 457 508 352 38,8
✕ 6 6.00 18.00 21.13 14.38 112.0
✕ 168,3 152 457 537 365 50,8
✕ 8 6.00 18.00 23.25 15.25 127.1
✕ 219,1 152 457 591 387 57,7
10 ✕ 10 ✕ 3 6.50 20.50 19.88 14.88 96.0
273,0 ✕ 273,0 ✕ 88,9 165 521 505 378 43,5
✕ 4 6.50 20.50 20.75 15.25 97.4
✕ 114,3 165 521 527 387 44,2
✕ 5 6.50 20.50 21.88 15.75 115.0
✕ 141,3 165 521 556 400 52,2
✕ 6 6.50 20.50 22.88 16.13 133.1
✕ 168,3 165 521 581 410 60,4
✕ 8 6.50 20.50 27.25 19.25 156.0
✕ 219,1 165 521 692 489 70,8
✕ 10 6.50 20.50 27.25 18.00 190.0
✕ 273,0 165 521 692 457 86,2
12 ✕ 12 ✕ 12 7.00 23.00 31.00 20.50 240.0
323,9 ✕ 323,9 ✕ 323,9 178 584 787 521 108,9

07.01 - 13
No. 30-R 07.01-20A

Approx Approx.
Reducing Lateral SIZE C to C to Weight SIZE C to C to Weight
(Segmentally welded steel) Nominal LE SE Each Nominal LE SE Each
Inches Inches Inches Lbs. Inches Inches Inches Lbs
Actual mm mm mm kg Actual mm mm mm kg
3✕3 ✕ 2 8.50 3.25 9.8 12 ✕ 12 ✕ 10 23.00 7.00 167.0
C to 88,9 ✕ 88,9 ✕ 60,3 216 83 4,4 323,9 ✕ 323,9 ✕ 273,0 584 178 75,8
LE
✕ 2¹⁄₂ 8.50 3.25 9.8 14 ✕ 14 ✕ 4 26.50 7.50 172.0
✕ 73,0 216 83 4,4 355,6 ✕ 355,6 ✕ 114,3 673 191 78,0
LE

4✕4 ✕ 2 ✕6
to

C to 10.50 3.75 10.0 26.50 7.50 187.0

C

SE 114,3 ✕ 114,3 ✕ 60,3 267 95 4,5 ✕ 168,3 673 191 84,8

✕ 2¹⁄₂ 10.50 3.75 10.0 ✕8 26.50 7.50 205.8
✕ 73,0 267 95 4,5 ✕ 219,1 673 191 93,4
✕3 10.50 3.75 18.3 ✕ 10 26.50 7.50 235.0
✕ 88,9 267 95 8,3 ✕ 273,0 673 191 106,6
5✕5 ✕ 2 12.50 4.00 24.0 ✕ 12 26.50 7.50 250.0
141,3 ✕ 141,3 ✕ 60,3 318 102 10,9 ✕ 323,9 673 191 113,4
✕3 12.50 4.00 27.0 16 ✕ 16 ✕ 6 29.00 8.00 215.0
✕ 88,9 318 102 12,2 406,4 ✕ 406,4 ✕ 168,3 737 203 97,5
✕4 12.50 4.00 26.5 ✕8 29.00 8.00 252.5
✕ 114,3 318 102 12,0 ✕ 219,1 737 203 114,5
6✕6 ✕ 3 14.00 4.50 37.0 ✕ 10 29.00 8.00 265.0
168,3 ✕ 168,3 ✕ 88,9 356 114 16,8 ✕ 273,0 737 203 120,2
✕4 14.00 4.50 36.0 ✕ 12 29.00 8.00 295.0
✕ 114,3 356 114 16,3 ✕ 323,9 737 203 133,8
✕5 14.00 4.50 44.7 ✕ 14 29.00 8.00 305.0
✕ 141,3 356 114 20,3 ✕ 355,6 737 203 138,3
8✕8 ✕ 4 18.00 6.00 62.0 18 ✕ 18 ✕ 6 32.00 8.50 274.0
219,1 ✕ 219,1 ✕ 114,3 457 152 28,1 455,6 ✕ 455,6 ✕ 168,3 813 216 124,3
✕5 18.00 6.00 75.5 ✕8 32.00 8.50 275.0
✕ 141,3 457 152 34,2 ✕ 219,1 813 216 124,7
✕6 18.00 6.00 82.0 ✕ 12 32.00 8.50 347.0
✕ 168,3 457 152 37,2 ✕ 323,9 813 216 157,4
10 ✕ 10 ✕ 4 20.50 6.50 104.8 ✕ 14 32.00 8.50 350.0
273,0 ✕ 273,0 ✕ 114,3 521 165 47,5 ✕ 355,6 813 216 158,8
✕5 20.50 6.50 99.0 ✕ 16 32.00 8.50 362.0
✕ 141,3 521 165 44,9 ✕ 406,4 813 216 164,2
✕6 20.50 6.50 105.8 20 ✕ 20 ✕ 12 35.00 9.00 415.0
✕ 168,3 521 165 48,0 508,0 ✕ 508,0 ✕ 323,9 889 229 188,2
✕8 20.50 6.50 118.0 ✕ 14 35.00 9.00 420.0
✕ 219,1 521 165 53,5 ✕ 355,6 889 229 190,5
12 ✕ 12 ✕ 5 23.00 7.00 122.0 ✕ 16 35.00 9.00 425.0
323,9 ✕ 323,9 ✕ 141,3 584 178 55,3 ✕ 406,4 889 229 192,8
✕6 23.00 7.00 137.0 24 ✕ 24 ✕ 16 40.00 10.00 425.0
✕ 168,3 584 178 62,1 610,0 ✕ 610,0 ✕ 406,4 1016 254 192,8
✕8 23.00 7.00 147.0 ✕ 20 40.00 10.00 570.0
✕ 219,1 584 178 66,7 ✕ 508,0 1016 254 258,6

07.01-21C

No. 80 Female E to E
Approx.
Weight Each
SIZE
Threaded Nominal Inches Inches Lbs.
Adapter Actual mm mm kg

Ductile Iron (except as noted) ³⁄₄ 2.00 1.0

26,9 51 0,5

E to E 1 2.06 1.0
33,7 52 0,5
1¹⁄₄ 2.31 1.5 s
42,4 59 0,7
1¹⁄₂ 2.31 1.5 s
48,3 59 0,7
2 2.50 1.4
60,3 64 0,6
2¹⁄₂ 2.75 1.5
73,0 70 0,7
3 2.75 2.9
88,9 70 1,3
4 3.25 4.5
114,3 83 2,0
Available with British Standard Pipe threads, specify “BSP” clearly on order.
s = steel

07.01 - 14
 07.01-22A
No. 32-R SIZE Dimensions Approx.
Reducing Tee Nominal Inches/mm Weight Each
Inches Lbs
Wye Actual mm G H E1 E2 kg
(Segmentally welded steel) 4✕3 ✕ 3 3.50 9.50 10.75 5.75 16.0
114,3 ✕ 88,9 ✕ 88,9 89 241 273 146 7,3
✕4 3.75 10.50 13.63 8.13 16.0
✕ 114,3 95 267 346 206 7,3
5✕3 ✕ 3 1.25 9.75 11.50 7.63 25.0
H 141,3 ✕ 88,9 ✕ 88,9 32 248 292 194 11,3
E2
✕5 4.00 12.50 16.13 11.13 43.4
✕ 141,3 102 318 410 283 19,5
5✕4 ✕ 3 1.88 9.13 11.88 6.88 21.0
G 141,3 ✕ 114,3 ✕ 88,9 48 232 302 175 9,5
E1 ✕4 1.88 9.13 12.75 7.25 25.0
✕ 114,3 48 232 324 184 11,3
6✕4 ✕ 6 4.50 14.00 18.25 11.50 61.0
168,3 ✕ 114,3 ✕ 168,3 114 356 464 292 27,7
6✕5 ✕ 3 1.25 10.75 13.00 8.00 27.0
168,3 ✕ 141,3 ✕ 88,9 32 273 330 203 12,2
✕4 1.25 10.75 13.88 8.38 31.0
✕ 114,3 32 273 352 213 14,1
8✕6 ✕ 4 1.00 12.00 14.75 9.25 45.0
219,1 ✕ 168,3 ✕ 114,3 25 304 375 235 20,4
8✕6 ✕ 8 6.00 18.00 23.25 15.25 112.0
219,1 ✕ 168,3 ✕ 219,1 152 457 591 387 50,8

07.01-23B

SIZE Approx.
No. 48 Nominal E to E Weight Each
Hose Nipple Inches Inches Lbs.
Actual mm mm kg
(Steel)
³⁄₄ 3.25 0.3
26,9 83 0,1
E to E 1 3.38 0.4
33,7 86 0,2
1¹⁄₄ 3.88 0.6
42,4 98 0,3
1¹⁄₂ 3.88 0.8
48,3 98 0,4
2 4.50 1.1
60,3 114 0,5
2¹⁄₂ 5.38 2.0
73,0 137 0,9
3 5.75 3.2
88,9 146 1,5
4 7.12 4.9
114,3 181 2,2
5 9.75 8.0
141,3 248 3,6
6 11.00 14.3
168,3 279 6,5
8 12.50 24.7
219,1 318 11,2
10 14.00 40.1
273,0 356 18,2
12 16.00 62.0
323,9 406 28,1

07.01 - 15