Scribd
Upload
11 views

Internet Access PCs List

Uploaded by

super-mani2000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

Internet Access PCs List

Uploaded by

super-mani2000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Internet Access PCs List http://192.168.1.245/HelpWireless.

asp

Help

Basic Wireless Setup


Mode You may choose Mixed Mode if you have both 802.11b and 802.11g o
your network. If you would like to restrict your network to only 802.11b
802.11g clients, then choose Wireless-B Only or Wireless-G Only
mode.
Network Name The SSID is the unique name shared among all PCs in your network. T
(SSID) SSID must be the same for all the PCs on the network in order for the
to communicate with each other.

Channel The channel determines which frequency your network will operate in.
you are experiencing poor performance, try changing to another chann
SSID Broadcast SSID broadcast enables the access point to identify itself as an availa
network to network scans. If you do not wish to announce the SSID to
other devices, select Disabled
Current This section tells you they type of wireless security is configured on th
Encryption Access Point.
SES Button You have two options to initiate the SecureEasySetup wireless securit
One option is to setup through the SES button on the front panel of yo
Access Point. The other option is to use the SES button displayed on
page. You can click the green SES button to initiate the setup. You w
have 2 minutes to push the SES soft button on your wireless client for
connection.
For Non-SES client adapters, go to the Wireless Security and write do
the passphrase generated by SES. You will have to enter the
passphrase manually for your client adapter.

Click the Reset Security button to clear the SES security key and
prepare to configure your wireless clients. Follow the onscreen
instructions. Once you reset, you will have to reconfigure all the client
adapters.

Click the Close button to close this window or Print to print this information.

Close Print

1 von 1 04.10.2014 14:17

You might also like