Scribd
Upload
620 views

PTS-WST-7 Data Sheet

The document describes an intelligent dual-supply module ATS controller that combines digital, intelligence and networking capabilities. It has various functions like automatic measurement, LCD display, communication and protection features. It is suitable for use in various electrical applications.

Uploaded by

Sattawat Punta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
620 views

PTS-WST-7 Data Sheet

The document describes an intelligent dual-supply module ATS controller that combines digital, intelligence and networking capabilities. It has various functions like automatic measurement, LCD display, communication and protection features. It is suitable for use in various electrical applications.

Uploaded by

Sattawat Punta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PTS-WST-7 series ATS controller is intelligent dual-supply module with configurable function, automatic

measurement, LCD display, and digital communication. It combines digital, intelligence and networking. Automatic
measurement and control can reduce incorrect operation. It is an ideal option for ATS.
The powerful Microprocessor contained within the unit allows for precision
voltage (2-way-3-phase) measuring and make accurate judgment; in addition, the
corresponding digital output port will active when there is over/under voltage,
over/under frequency, loss of phase and other abnormal condition occurs. This
controller has full consideration in various application of ATS (automatic transfer
system) and can be directly used for PC ATS, CB ATS, CC ATS etc. It has compact
structure, advanced circuits, simple wiring, and high reliability, and can be widely
used in electrical devices, automatic control and testing system of electric power,
telecommunications, petroleum, coal, metallurgy, railways, municipal
administration, intelligent building, etc.

PERFORMANCE AND CHARACTERISTICS


Its performance and characteristics are shown as below,
• System type can set as: S1 (Mains) & S2 (Mains), S1 (Mains) & S2 (Generator), S1 (Generator) & S2 (Mains), S1
(Generator) & S2 (Generator);
• 132x64 LCD with backlight, multilingual interface (including English, Chinese or other languages), push-button operation;
• Collect and display 2-way 3-phase Voltage, Frequency and Phase;
• S1/S2 separated over current warning/ trip alarm;
• NEL (Non-essential Load) trip function;
• Display continuous power supply time and S1/S2 total power supply time;
• Over/under voltage, loss of phase, over/under frequency protection;
• Automatic/Manual mode. In manual mode, can force the switch to close or open;
• All parameters can be set on site. Password’s authentication ensures authorized staff operation only;
• The genset can be Manual Test on site to achieve start/stop operation;
• ATS Controller has function of automatic Re-closing;
• Closing output signal can be set as on intervals or as continuous output;
• Applicable for PC Three-stage, PC Two-stage, CB, and CC switch;
• Applicable for 2 isolated neutral line;
• Real-time clock (RTC); Event log Function (Event log can record 99 items circularly);
• Scheduled Run & Scheduled Not Run (can be set as start genset once a day/week/month whether with load or not);
• Can control two generators to work as Cycle Run mode, Master Run mode and Balance Run mode;
• Widely power supply range DC(8~35)V allows the controller can bear 80V instantaneous current;
• Large terminal space allows the controller can bear maximum 625V input voltage;
• With RS485 isolated communication interface. With "remote controlling, remote measuring, remote communication,
remote regulating" function by the ModBus communication protocol. Can remote start/stop the genset and remote control
the ATS to close or open;
• Suitable for various AC systems (3 phase 4-wires, 3-phase 3-wires (DC Supply), single-phase 2-wire, and 2-phase 3-wire);
• Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting，compact structure with easy
installation.

All products and features that appear in this material are the property of their original owners, PTS APAC Private Limited retains exclusive rights to all content and information of
this document. PTS endeavours to ensure the completeness and accuracy of the information, however, information in this information are subject to change without prior notice,
PTS assumes no responsibility.

PTS logo are trademarks and service marks of PTS APAC Private Limited All Rights Reserved © October 2020.
Performance Parameters
Items Contents
1. DC 8.0V~35.0V, continuous power supply.
Operating Voltage
2. AC90V~280V during AC power supply L1N1/L2N2
Power Consumption <5W (Standby mode: ≤2W)
AC system
3P4W (L-L) (80~480)V
AC Voltage Input 3P3W (L-L) (80~625)V (require DC supply)
1P2W (L-N) (50~280)V
2P3W (A-B) (80~480)V
Rated Frequency 50/60Hz
Close Relay Output 16A AC250V Volts free output
Auxiliary Relay Output 16A/7A AC250V Volts free output
Digital Input GND (B-) connect is active.
Communication RS485 isolated interface, MODBUS Protocol
Case Dimensions 197mmx152mmx47mm
Panel Cutout 186mmx141mm
Temperature: (-25~+70)°C;
Working Conditions
Humidity: (20~93)%RH
Storage Condition Temperature: (-25~+70)°C
Protection Level IP55 Gasket
Apply AC2.2kV voltage between high voltage terminal and low voltage terminal;
Insulation Strength
The leakage current is not more than 3mA within 1min.
Weight PTS-WST-7 / PTS-WST-9: 0.8kg

Installation Dimension

PTS APAC PRIVATE LIMITED


23 New Industrial Road,
#08-04 Solstice Business Centre.
Singapore 536209.
Tel: +65 6443 5086 | Fax: +65 6443 5095
Email: [email protected] / [email protected]
All products and features that appear in this material are the property of their original owners, PTS APAC Private Limited retains exclusive rights to all content and information of
this document. PTS endeavours to ensure the completeness and accuracy of the information, however, information in this information are subject to change without prior notice,
PTS assumes no responsibility.

PTS logo are trademarks and service marks of PTS APAC Private Limited All Rights Reserved © October 2020.

You might also like