Scribd
Upload
8 views4 pages

PF qt40 Io-Link en

Uploaded by

Jeff Kendall
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views4 pages

PF qt40 Io-Link en

Uploaded by

Jeff Kendall
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

DIN rail power supply

with IO-Link interface


QT series | 960W | 3-phase

Efficient. Easy. Connected.

Awarded with the


Efficient. Easy. Connected.
As a member of the well-known QT series, this version offers a digital communication interface. It is based on the wide-
spread IO-Link standard, which allows the adaptation to various fieldbus protocols.

With a comprehensive and well-chosen set of operating data, the QT40.241-B2 enables for preventive maintenance
measures. Due to near-time communication (events), failures can be fixed before they occur. Customers will benefit from
increased process uptimes and long-term cost savings.

Efficient Easy
Power Supply Connectivity

3-phase I 960W I 24V, 40A IO-Link v 1.1 (IEC 61131-3)

95.3% efficiency 4-pole M12 connector

+50% BonusPower® for 5s COM3 (< 230.4 kBaud)

100A for 10ms Integrated non-volatile memory

Active PFC

110mm

Benefits at a glance

€
Easy to install Save time and costs Improve customer service

Adapt it to various fieldbus systems. Implement preventative maintenance. Analyze the quality of the power grid.

Make use of automated  Optimize the utilization  Speed up fault analysis and
parameterization. of your system. troubleshooting.

www.pulspower.com
Technical data
Output Input
Output voltage range 24 - 28V (via potentiometer) AC input voltage nominal 380 - 480V
15 - 28V (remote via IO-Link) AC input voltage range 323 - 576V
Output current nominal 40A Power factor 0.92
Output current temporary 60A (5s) AC inrush current, typ. < 4.5A
Output transient current 100A (10ms) Uout >20V
Overload behaviour constant current mode

General Data communication


Efficiency 95.3% Protocol (standard) IO-Link v1.1 (IEC 61131-9)
Lifetime expectancy (40°C) 69kh Power supply 24V over ComLine
MTBF SN29500, IEC 61709 685kh Configuration upload IODD, plug-and-play
Hold-up time, typ. 25ms Transmission speed < 230.4 kBaud
Operating temperature -25°C to 70°C Transmission distance up to 20m
Dimensions WxHxD 110x124x127mm Transmission medium 3 wires
Weight 1500g Memory 8Kbit EEPROM
Warranty 3 years Connector PG male connector
Approvals (planned) CE, cULus 61010-2 listed Thread M12
Order number QT40.241-B2 No. of pins 4, A code

All parameters are specified at nominal values, 3x400Vac, 50Hz, 25°C ambient temperature and 5 minutes run-in time unless otherwise noted.

Standards and Approvals

Trusted technology Compact design


QT40

The QT series consists of powerful and highly reliable


industrial grade power supplies. They are the result - 45%
of more than a decade of application experience in smaller design
demanding industries like global machine building and
Competitor*
automotive.
The compact design and very low inrush currents enable
a high engineering flexibility.
Integrated current reserves provide strong load Long lifetime
start-up support. An output power manager dis-
Competitor* 26.6 kh
tributes the load current in parallel use homo-
genously among the units. This ensures the
+ 61% longer lifetime
utmost available lifetime. QT40 69 kh

* Average of the top 5 competitors in the 960W class.


Data logging
ON DEMAND PUSH PUSH

Acyclical parameters Cyclical process data Events


Device information (static) Output current (every 2ms) DC warning
Manufacturer name Bonus Power
Product name Overload
WRITE
Serial number Temperature too high
Hardware and firmware inspection status Remote functions Input voltage too high
Switch on power supply Input voltage too low
Device information (dynamic)
Switch off power supply Power supply failure
Device runtime
Setting the output voltage Maintenance required
Remaining lifetime in years
Temperature of the air flow

Input parameters
Transient counter
Input voltage
IO Device Description (IODD) Download the IODD
on our website:
Learn more about the device profile and
Output parameters
the communication network profile of the
Output voltage
QT40.241-B2.
Load level in %

IO-Link: Benefits and integration


Dashboard:
Persistent User, HMI, Cloud
The configuration data of the power supply is
saved by the IO-Link Master, making replacements
Company IT / Industrial Ethernet
easier and faster.
PLC

Flexible
Adaptation to various fieldbus systems is possible
because the IO-Link Master operates as a flexible Fieldbus / Industrial Ethernet
interface between protocol levels.
IO-Link Master

Reliable Power Supply Data


Stable data transmission at all times because the IO-
Link module is powered by the communication line.

Power
Actuator Sensor Supply

Grid Load

www.pulspower.com FLY06-EN-01

You might also like