® 1383 bkW / 1855 bhp

3516 B
1200 rpm
Industrial

CATERPILLAR ENGINE
Image shown may not reflect
SPECIFICATIONS
actual engine V-16, 4-Stroke-Cycle Diesel
Bore....................................................... 170.0 mm (6.69 in)
Stroke.................................................... 190.0 mm (7.48 in)
Displacement....................................... 69.0 L (4,210.64 in3)
Aspiration..........................................Turbocharged / SCAC
Compression Ratio....................................................... 14:1
Rotation (from flywheel end).................... Counterclockwise
Capacity for Liquids
Cooling System.....................................233.0 L (61.6 gal)
Lube Oil System (refill)....................... 401.3 L (106.0 gal)
Engine Weight, Net Dry (approximate)
FEATURES
EMISSIONS FULL RANGE OF ATTACHMENTS
Meets Tier 1 emission requirements. Tier 1 refers to Wide range of bolt-on system expansion attachments,
EPA (U.S.) non-road standards. factory designed and tested

SINGLE SOURCE SUPPLIER UNMATCHED PRODUCT SUPPORT OFFERED

Caterpillar: THROUGH WORLDWIDE CATERPILLAR DEALER
- Casts engine blocks, heads, cylinder liners, and NETWORK
flywheel housings More than 1,500 dealer outlets.
- Machines critical components Caterpillar factory-trained dealer technicians service
- Assembles complete engine every aspect of your industrial engine.
Ownership of these manufacturing processes enables 99.7% of parts orders filled within 24 hours worldwide.
Caterpillar to produce high quality, dependable product. Caterpillar parts and labor warranty.
Preventive maintenance agreements available for repair
Factory-designed systems built at Caterpillar ISO before failure options.
9001:2000 certified facilities Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to determine:
TESTING - internal engine component condition
- presence of unwanted fluids
Prototype testing on every model: - presence of combustion by-products
- proves computer design
- verifies system torsional stability
- functionality tests every model WEB SITE
For all your industrial power requirements, visit
Every Caterpillar engine is dynamometer tested under www.cat-industrial.com.
full load to ensure proper engine performance.

For additional information on all your petroleum power

requirements, visit www.cat-oilandgas.com.

25 April 2007 5:18 PM

 ®
3516 B INDUSTRIAL ENGINE
1383 bkW (1855 bhp)

STANDARD ENGINE EQUIPMENT

Air Inlet System Lube System
Separate circuit aftercooler core, corrosion resistant Crankcase breather, top mounted
coated (air side), Four turbochargers, center mounted Oil cooler
Oil filler and dipstick, RH
Control System Oil pump
Oil filter, LH, spin-on type
Caterpillar ADEM™ II Electronic Engine Control, RH, Front sump oil pan, 250 hour change interval
with electronic unit injector fuel system (10 amp DC
power required to drive electronic engine control
module) Mounting System
Trunnion front support
Cooling System
Thermostats and housing Power Take-Offs
Jacket water pump, gear driven, centrifugal Accessory drive, lower LH, Front housing, two sided
Connections for radiator cooling
Protection System
Exhaust System ADEM™ II monitoring system to provide customer
Exhaust manifold, dry, Four turbochargers with programmable engine, De-rate strategies to protect
watercooled bearings, Two exhaust outlets 203 mm (8 against adverse operating condition, Emergency stop
in) round flange logic inputs provided at 40-pin customer interface
connection
Flywheels and Flywheel Housings
Flywheel, SAE No. 0, 151 teeth Starting System
Flywheel housing, SAE No. 0 Dual 24V electric starting motor, LH, unwired
SAE standard rotation
General
Fuel System Paint, Caterpillar Yellow
Fuel filter, LH spin-on type Vibration damper
Fuel transfer pump Lifting eyes
Electronically controlled unit injectors

Instrumentation
No standard instrumentation, Optional, remote
instrumentation available

2 25 April 2007 5:18 PM

 ®
3516 B INDUSTRIAL ENGINE
1383 bkW (1855 bhp)

PERFORMANCE CURVES

P/D-ELEK - DM4605-01

Engine English
Torque lb•ft

Engine
Power bhp

BSFC
lb/bhp-hr

Engine Speed rpm

Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
1200 1854 8116 .349 92.5
1200 1667 7296 .348 82.8
1200 1482 6485 .346 73.2
1200 1389 6081 .345 68.5
1200 1297 5677 .344 63.8
1200 194 847 .497 13.8
1200 931 4075 .347 46.1
1200 752 3292 .353 37.9
1200 570 2494 .366 29.8
1200 477 2088 .378 25.7
1200 384 1679 .397 21.7
1200 1114 4875 .344 54.8

3 25 April 2007 5:18 PM

 ®
3516 B INDUSTRIAL ENGINE
1383 bkW (1855 bhp)

RATINGS AND CONDITIONS

P/D Elek (A Continuous) Continuous heavy duty Engine Performance Engine performance is corrected
service where the engine is operated at maximum to inlet air standard conditions of 99 KPA (29.31 IN HG)
power and speed up to 100% of the time without dry barometer and 25 deg C (77 deg F) temperature.
interruption or load cycling. Time at full load can be up These values correspond to the standard atmospheric
to 100% of the duty cycle. Typical service examples pressure and temperature as shown in SAE J1995.
are: pumping, ventilation, customer specs.
CSA Certification Available Performance measured using a standard fuel with fuel
gravity of 35 degrees API having a lower heating value
of 42,780 KJ/KG (18,390 BTU/LB) when used at 29
DEG (84.2 DEG F) where the density is 838.9 G/L
(7.001 LB/US GAL).

The corrected performance values shown for Caterpillar

engines will approximate the values obtained when the
observed performance data is corrected to SAE J1995,
ISO 3046-2 and 8665 and 2288 and 9249 and 1585,
EEC 80/1269 and DIN 70020 standard reference
conditions.

Engine Dimensions
(1) Length 126.53 in Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 70.28 in (Drawing # 2545449 ).
(3) Height 79.71 in

Performance Number: DM4605-01 © 2007 Caterpillar

Feature Code: 516DZ21 Arr. Number: 1744952 All rights reserved.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
9603081 CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and the
POWER EDGE trade dress, as well as corporate and product identity
used herein, are trademarks of Caterpillar and may not be used without
permission.
 ®
3516 B INDUSTRIAL ENGINE
1383 bkW (1855 bhp)

No data is currently available for this section.

5 25 April 2007 5:18 PM