This document provides information on Dowsil 550 Fluid, including its features, benefits, applications, typical properties, descriptions, handling precautions, health and environmental information. It is a polyphenylmethyldimethylsiloxane fluid with low volatility, good heat transfer properties, and a serviceable temperature range of -40°C to 315°C.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
31 views2 pages
550 Fluid
This document provides information on Dowsil 550 Fluid, including its features, benefits, applications, typical properties, descriptions, handling precautions, health and environmental information. It is a polyphenylmethyldimethylsiloxane fluid with low volatility, good heat transfer properties, and a serviceable temperature range of -40°C to 315°C.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2
Technical Data Sheet
DOWSIL™ 550 Fluid
FEATURES & BENEFITS Polyphenylmethyldimethylsiloxane
• Low volatility • Serviceable temperature range of APPLICATIONS -40°C up to 230°C in open As a lubricant: systems, and up to 315°C in closed • Base oil for high temperature ball bearing greases. systems • Lubricating oil for high temperature instruments. • Viscosity of 100-150mm²/sec at As a heat transfer medium: 25°C • Heat-treating baths for speciality metals. • High flash point • Heat exchange fluid for research apparatus and instrument calibration baths. • Excellent heat transfer • Heat transfer oil in capacitors, transformers and various electronics. characteristics As a thermostat fluid: • High viscosity index • Suitable for temperatures from -40°C to 315°C in thermostat systems, which • Good compressibility should be kept clean. • Good oxidation and thermal stability TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Property Unit Result
Viscosity at +99°C mm2/s 20 Viscosity at +38°C mm2/s 84 Viscosity at +25°C mm2/s 100-150 Viscosity at -29°C mm2/s 22,000 Viscosity-temperature coefficient1 0.76 Viscosity stability2 <5% Flash point - open cup °C >300 Freeze point °C -50 Refractive index at 25°C 1.4900-1.5000 Surface tension at 25°C mN/m 24.5 Volatility 12 months/ 150°C % 4 Volatility 12 months/ 200°C % 15 Volatility 4 hours/ 250°C % 1.2 Volatility 48 hours/ 250°C % 5.5 Thermal gel time2 - months at 200°C3 14 Thermal gel time2 - hours at 250°C3 1200 Thermal gel time2 - hours at 260°C3 200 Thermal conductivity at 25°C, W/m.K 0.13 TYPICAL PROPERTIES (Continued) Property Unit Result Specific heat at 0°C kJ/kg. K 1.418 Specific heat at 40°C kJ/kg. K 1.498 Specific heat at 100°C kJ/kg. K 1.615 Specific heat at 200°C kJ/kg. K 1.812 1 Viscosity-temperature coefficient equals (1- viscosity at 99°C/viscosity at 38°C). 2 % change after 16 hours at 250°C, viscosity measured at 25°C. 3 As determined by heating a 35 to 40 gram sample in a 150 ml beaker (19.35 cm² bottom area). Air circulating oven used.
Table 1: Vapour Pressure vs. WWW.CONSUMER.DOW.COM, LIMITED WARRANTY
Temperature OR FROM YOUR DOW SALES INFORMATION – PLEASE APPLICATION ENGINEER, OR Temperature, °C Pressure, Pa DISTRIBUTOR, OR BY CALLING READ CAREFULLY 228 11 DOW CUSTOMER SERVICE. The information contained herein is 244 25 offered in good faith and is believed to 263 84 USABLE LIFE AND be accurate. However, because 277 155 conditions and methods of use of our 380 13332 STORAGE When stored at or below 60°C in the products are beyond our control, this (1mm Hg = 133.322 Pa) information should not be used in original unopened containers, this Table 2: Compressibility product has a usable life of 60 months substitution for customer’s tests to from the date of production. ensure that our products are safe, Pressure MPa % Compressibility effective, and fully satisfactory for the 7 0.5 PACKAGING intended end use. Suggestions of use 20 1.4 shall not be taken as inducements to 35 2.3 INFORMATION DOWSIL 550 Fluid is available in 500 infringe any patent. 50 3.0 75 4.2 ml and 1 kg. bottles as well as Dow’s sole warranty is that our 100 5.2 18 Kg. pails, 220 kg. drums and products will meet the sales 150 6.8 1275 kg. IBC’s. specifications in effect at the time of LIMITATIONS shipment. DESCRIPTION DOWSIL™ 550 Fluid is a trimethyl- This product is neither tested nor Your exclusive remedy for breach of terminated dimethyl, phenylmethyl represented as suitable for medical or such warranty is limited to refund of siloxane fluid. pharmaceutical uses. purchase price or replacement of any product shown to be other than as HANDLING HEALTH AND warranted. PRECAUTIONS ENVIRONMENTAL PRODUCT SAFETY TO THE FULLEST EXTENT INFORMATION INFORMATION REQUIRED FOR PERMITTED BY APPLICABLE To support customers in their product SAFE USE IS NOT INCLUDED IN LAW, DOW SPECIFICALLY safety needs, Dow has an extensive THIS DOCUMENT. BEFORE DISCLAIMS ANY OTHER Product Stewardship organization and HANDLING, READ PRODUCT EXPRESS OR IMPLIED a team of product safety and AND SAFETY DATA SHEETS WARRANTY OF FITNESS FOR A regulatory compliance specialists AND CONTAINER LABELS FOR PARTICULAR PURPOSE OR available in each area. SAFE USE, PHYSICAL AND MERCHANTABILITY. HEALTH HAZARD For further information, please see our DOW DISCLAIMS LIABILITY INFORMATION. THE SAFETY website, www.consumer.dow.com or FOR ANY INCIDENTAL OR DATA SHEET IS AVAILABLE ON consult your local Dow representative. CONSEQUENTIAL DAMAGES. THE DOW WEBSITE AT www.consumer.dow.com