Scribd
Upload
28 views2 pages

Rate Work

Finishing rate

Uploaded by

deepak kumar shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

Rate Work

Finishing rate

Uploaded by

deepak kumar shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

S.

No GIVEN BELOW WORK DESCRIPTION UNIT RATE


1 Flooring : Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Sqft
Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to
IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm
thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching
pigments etc. complete Light shade Plain ivory light shade Size 600X1200mm thickness 9-10mm.
(Company : Kajariya )

2 Putti : Providing and applying white cement based putty of average thickness 1 mm, of approved brand Sqft
over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and
scaffold etc in all position complete.
(Company : JK , Birla White )

3 Colour : Wall painting by any mechanical or manual means with plastic emulsion paint of approved Sqft
brand and manufacture to give an even shade: Two or more coats on new work
(Company : Asian , Berger Deluxe )

4 Primer : Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Sqft
Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour
complete, as per manufacturer's specification. Two or more coat on new work
(Company : Asian , Berger Deluxe )

7 Door Shutter Mica with fitting : Providing and fixing ISI marked flush door shutters conforming to IS: Sqft
2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and
well matched commercial ply with vertical grains or cross bands and face veneers on both faces of
shutters with SS door fitiings
(Company : Centuray )

8 Aluminium Window : Providing and fixing aluminium work for doors, windows, ventilators and Sqft
partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,
including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM
rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of
Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

9 Window Grill : Providing and fixing 10 mm sqmm M.S. grills of required pattern in frames of windows Sqft
etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all
complete. Fixed to steel windows by welding.

14 Main Gate : Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) Kg
trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc. complete

15 Electrical (pvc pipe moduler box, cable, switch box, points, Lighting & Fan.)
(Company: Havells)

16 Sanitary - ( Counter top wash basin ,fitting diverter body with & hung wc)
(Company - Jaquar, Finolax)

18 MODULAR KITCHEN:- (Shutter & Drawer will be made of ply & finishing will be done with 1mm Sqft 1450
laminate.
Modular kitchen accessories include :-
Drawer partition
Wired cutlery cup and saucer basket
Wired Plate basket
Wired Thali basket
Wired Bottle pull-out basket
Microwave and Otg provision
Detergent holder and bin holder
19 FALSE CEILING (PVC, or polyvinyl chloride has the chemical formula (C2H3Cl)n and is a plastic Sqft
composite material, which is very versatile. Resistant to moisture and termite-proof.

You might also like