Schedule

Issue date: 1 November 2023

Valid until: 02 September 2025

NO: ACB 025

(Issue 2, 1st November 2023 replacement
of schedule dated 30th June 2021)
Page: 1 of 6

CERTIFICATION BODY CIDB HOLDINGS SDN. BHD.

LOCATION: NO. 2, JALAN SEPADU 25/123A
SEKSYEN 25
40400, SHAH ALAM
SELANGOR
MALAYSIA

PROGRAMME(S) PRODUCT CERTIFICATION (PC)

Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation.

SUB-PROGRAMME NOT APPLICABLE

DATE OF INITIAL
3 SEPTEMBER 2014
ACCREDITATION:
ACCREDITATION CRITERIA: ISO/IEC 17065:2012

SKIM AKREDITASI BADAN-BADAN PENSIJILAN

SCHEME FOR THE ACCREDITATION OF CERTIFICATION BODIES (ACB)
 Schedule
Issue date: 1 November 2023
Valid until: 02 September 2025

NO: ACB 025

(Issue 2, 1st November 2023 replacement
of schedule dated 30th June 2021)
Page: 2 of 6

CIDB HOLDINGS SDN. BHD.

NO. 2, JALAN SEPADU 25/123A
SEKSYEN 25
CENTRAL LOCATION:
40400, SHAH ALAM
SELANGOR
MALAYSIA
PROGRAMME: PRODUCT CERTIFICATION
SUB-PROGRAMME NOT APPLICABLE
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation.

DATE OF INITIAL ACCREDITATION: 3 SEPTEMBER 2014

ACCREDITATION CRITERIA: ISO/IEC 17065:2012
SCOPE OF ACCREDITATION

A. ACCREDITED
CERTIFICATION TITLE
DOCUMENT
SCOPE NO. AND NACE CODE: 15(23.42)
MS ISO 13006:2014 Ceramic Tiles – Definitions, Classification, Characteristics and Marking
MS ISO 10545-1:2018 Ceramic Tiles – Part 1: Sampling and basis for acceptance
MS ISO 10545-2:2002 Ceramic Tiles – Part 2: Determination of dimensions and surface quality
Ceramic Tiles – Part 3: Determination of water absorption, apparent
MS ISO 10545-3:2002
porosity apparent relative density and bulk density
Ceramic Tiles – Part 4: Determination of modulus of rupture and
MS ISO 10545-4:2003
breaking strength
Ceramic Tiles – Part 6: Determination of resistance to deep abrasion for
MS ISO 10545-6:2001
unglazed tiles
Ceramic Tiles – Part 7: Determination of resistance to surface abrasion
MS ISO 10545-7:2001
for glazed tiles
Ceramic Tiles – Part 11: Determination of crazing resistance for glazed
MS ISO 10545-11:2001
tiles
MS ISO 10545-13:2018 Ceramic Tiles – Part 13: Determination of chemical resistance
MS ISO 10545-14:2018 Ceramic Tiles – Part 14: Determination of resistance to stains
SCOPE NO. AND NACE CODE: 15(23.31)
MS 147:2001 Specification for quality of vitreous China sanitary appliances
MS 1522:2015 Vitreous China water closet pans – Specification (Fourth revision)
MS 795-1:2019 WC flushing cisterns – Part 1: Specification (Third revision)
MS 795-2:2019 WC flushing cisterns – Part 2: Inlet valves (Third revision)
MS 795-3:2019 WC flushing cisterns – Part 3: Flushing device (Third revision)
MS 2578:2014, AMD 1: 2017 Ceramic wash basins – Specification
MS 1799:2008 Urinals - Specification
SCOPE NO. AND NACE CODE: 17(24.10, 24.20, 24.31)
Steel for the reinforcement of concrete – Weldable reinforcing steel –
MS 146:2014
Bar, coil and decoiled product – Specification (Fourth revision)
SCOPE NO. AND NACE CODE: 17(24.20)
MS 1462 series
(MS 1462-1:2021, MS 1462-
3-1:2011 (Confirmed 2015), Metal scaffolding
MS 1462-3-2:2021, MS
1462-4-1:2021)
SCOPE NO. AND NACE CODE: 17(24.42)
Standard Specification for the Manufacture, Performance, and Testing of
ASTM C635/C635M-17
Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

SKIM AKREDITASI BADAN-BADAN PENSIJILAN

SCHEME FOR THE ACCREDITATION OF CERTIFICATION BODIES (ACB)
 Schedule
Issue date: 1 November 2023
Valid until: 02 September 2025

NO: ACB 025

(Issue 2, 1st November 2023 replacement
of schedule dated 30th June 2021)
Page: 3 of 6

CIDB HOLDINGS SDN. BHD.

NO. 2, JALAN SEPADU 25/123A
SEKSYEN 25
CENTRAL LOCATION:
40400, SHAH ALAM
SELANGOR
MALAYSIA
PROGRAMME: PRODUCT CERTIFICATION
SUB-PROGRAMME NOT APPLICABLE
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation.

DATE OF INITIAL ACCREDITATION: 3 SEPTEMBER 2014

ACCREDITATION CRITERIA: ISO/IEC 17065:2012
SCOPE OF ACCREDITATION

A. ACCREDITED
CERTIFICATION TITLE
DOCUMENT
SCOPE NO. AND NACE CODE: 17(25.72)
SCOPE NO. AND NACE CODE: 17(24.42, 25.12)
MS 832:2011 Aluminium alloy witndows – Specification (First revision)
MS 1017:2012 Aluminium framed sliding glass doors – Specification (First revision)
SCOPE NO. AND NACE CODE: 17(25.11)
Steel fabric for the reinforcement of concrete – Specification (Fourth
MS 145:2014
revision)
Roofing and cladding products from metal sheet – Specification for self-
MS 2500:2020
supporting of steel sheet (First revision)
MS 1138-1:2007 Prestressing steel - Part 1: General requirements
MS 1138-2:2007 Prestressing steel - Part 2: Cold-drawn wire
Prestressing steel - Part 3: Steel bars (Quenched and tempered) (First
MS 1138-3:2007
revision)
MS 1138-4:2007 Prestressing steel - Part 4: Strand (Second revision)
Hot rolled products of structural steels – Part 1: General technical
MS EN 10025-1:2011
delivery conditions (Second revision)
Hot rolled products of structural steels – Part 2: Technical delivery
MS EN 10025-2:2011
conditions for non-alloy structural steels (Second revision)
Non-alloy steel wire rod for conversion to wire – Part 1: General
MS ISO 16120-1:2008
requirements (First revision) (ISO 16120-1:2001, IDT)
Non-alloy steel wire rod for conversion to wire – Part 2: Specific
MS ISO 16120-2:2008 requirements for general purpose wire rod (First revision) (ISO 16120-
2:2001, IDT)
Non-alloy steel wire rod for conversion to wire – Part 3: Specific
MS ISO 16120-3:2008 requirements for rimmed and rimmed substitute, low carbon steel wire
rod (Second revision) (ISO 16120-3:2011, IDT)
Non-alloy steel wire rod for conversion to wire – Part 4: Specific
MS ISO 16120-4:2008 requirements for wire rod for special applications (ISO 16120-4:2001,
IDT)
Building hardware – Hardware for windows and door height windows –
BS EN 13126-1:2011
Requirements and test methods
Building hardware – Hardware for windows and door height windows –
BS EN 13126-3:2011 Requirements and test methods – Part 3: Handles, primarily for Tilt &
Turn, Tilt-First and Turn-Only hardware
Building hardware – Hardware for windows and door height windows –
BS EN 13126-
Requirements and test methods – Part 5: Devices that restrict the
5:2011+A1:2014
opening of windows and door height windows

SKIM AKREDITASI BADAN-BADAN PENSIJILAN

SCHEME FOR THE ACCREDITATION OF CERTIFICATION BODIES (ACB)
 Schedule
Issue date: 1 November 2023
Valid until: 02 September 2025

NO: ACB 025

(Issue 2, 1st November 2023 replacement
of schedule dated 30th June 2021)
Page: 4 of 6

CIDB HOLDINGS SDN. BHD.

NO. 2, JALAN SEPADU 25/123A
SEKSYEN 25
CENTRAL LOCATION:
40400, SHAH ALAM
SELANGOR
MALAYSIA
PROGRAMME: PRODUCT CERTIFICATION
SUB-PROGRAMME NOT APPLICABLE
DATE OF INITIAL
3 SEPTEMBER 2014
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation.

ACCREDITATION:
ACCREDITATION
ISO/IEC 17065:2012
CRITERIA:
SCOPE OF ACCREDITATION
A. ACCREDITED
CERTIFICATION TITLE
DOCUMENT
SCOPE NO. AND NACE CODE: 17(25.11)
Building hardware – Hardware for windows and door height windows –
BS EN 13126-6:2018 Requirements and test methods – Part 6: Variable geometry stay hinges
(with or without a friction stay)
Building hardware – Requirements and test methods windows and door
BS EN 13126-15:2008 height windows – Part 15: Rollers for horizontal sliding and sliding
folding windows and doors
Building hardware – Requirements and test methods windows and door
BS EN 13126-19:2011
height windows – Part 19: Sliding Closing Devices
SCOPE NO. AND NACE CODE: 18(28.14)
Sanitary tapware - Single taps and combination taps for water supply
BS EN 200:2008
systems of type 1 and type 2. General technical specification
Sanitary tapware - Mechanical mixing valves (PN 10) General technical
BS EN 817:2008
specifications
BS EN 15091:2013 Sanitary tapware – Electronic opening and closing sanitary tapware
Sanitary tapware – Shower outlets for sanitary tapware for water supply
DIN EN 1112:2008
systems of type 1 and type 2 – General technical specification
MS 2545:2014 Flush valves - Specification

SKIM AKREDITASI BADAN-BADAN PENSIJILAN

SCHEME FOR THE ACCREDITATION OF CERTIFICATION BODIES (ACB)
 Schedule
Issue date: 1 November 2023
Valid until: 02 September 2025

NO: ACB 025

(Issue 2, 1st November 2023 replacement
of schedule dated 30th June 2021)
Page: 5 of 6

CIDB HOLDINGS SDN. BHD.

NO. 2, JALAN SEPADU 25/123A
SEKSYEN 25
CENTRAL LOCATION:
40400, SHAH ALAM
SELANGOR
MALAYSIA
PROGRAMME: PRODUCT CERTIFICATION
SUB-PROGRAMME NOT APPLICABLE
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation.

DATE OF INITIAL ACCREDITATION: 3 SEPTEMBER 2014

ACCREDITATION CRITERIA: ISO/IEC 17065:2012
SCOPE OF ACCREDITATION

B. TO BE WITNESSED*
CERTIFICATION TITLE
DOCUMENT
SCOPE NO. AND NACE CODE: 17(24.20)
MS 2376:2011 Electric- resistance-welded steel pipe - specification
SCOPE NO. AND NACE CODE: 17(24.42)
MS 2289:2010 Aluminium and aluminium alloy – Extruded shapes
SCOPE NO. AND NACE CODE: 17(24.42, 25.11)
Aluminium composite panel for exterior and interior cladding -
MS 2571:2017
Specification
SCOPE NO. AND NACE CODE: 17(25.11)
Steel for the reinforcement of concrete – Weldable reinforcing steel -
EN 10080:2005
General
Prefinished/prepainted sheet metal products for interior/exterior building
MS 2383:2011
applications – Performance requirements
MS ISO 15630 series
Steel for the reinforcement and prestressing of concrete
(MS ISO 15630-1:2012, )
Steel wire ropes for general purposes – minimum requirements (ISO
MS ISO 2408:2004
2408:2004, IDT)
Steel wire for the reinforcement of concrete products – Specification
MS 144:2014
(Fourth revision)
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
MS 2384:2011
(Second revision)
SCOPE NO. AND NACE CODE: 17(25.61)
Continuous hot-dip zinc-coated carbon steels heet of commercial and
MS 2385:2011
drawing qualities (Second revision)
SCOPE NO. AND NACE CODE: 17(25.72)
Building hardware – Emergency exit devices operated by a lever handle
BS EN 179:2008
or push pad, for use on escape routes – Requirements and test methods
Building hardware – Panic exit devices operated by a horizontal bar, for
BS EN 1125:2008
use on escape routes – Requirements and test methods
Building hardware – Door coordinator devices – Requirements and test
BS EN 1158:1997
methods
Building hardware – Lever handles and knob furniture – Requirements
BS EN 1906:2012
and test methods
Building hardware – Single-axis hinges – Requirements and test
BS EN 1935:2002
methods
Building hardware – Mechanically operated locks and locking plates –
EN 12209:2016
Requirements and test methods
Building hardware – Locks and latches – Electromechanically operated
EN 14846:2008
locks and striking plates – Requirements and test methods
SKIM AKREDITASI BADAN-BADAN PENSIJILAN
SCHEME FOR THE ACCREDITATION OF CERTIFICATION BODIES (ACB)
 Schedule
Issue date: 1 November 2023
Valid until: 02 September 2025

NO: ACB 025

(Issue 2, 1st November 2023 replacement
of schedule dated 30th June 2021)
Page: 6 of 6

SCHEME DESCRIPTION:

Type 5 Scheme

“CIDB” mark scheme

Conformity of product is assured by the following:

Initial assessment:
Scan this QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation.

Selection and testing of one or more samples of a product representative of the production;
Assessment on manufacturer’s product quality plan;
Assessment of implementation of manufacturer’s product quality plan;
One “Product Certification” license may cover many models/products that conform to those standards.

On-going:

Assessment of Implementation of manufacturer’s product quality plan;

Scheduled and unscheduled market place surveillance i.e. selection and testing of samples from the
marketplace.

*Subject to witnessing by Department of Standards Malaysia within one accreditation cycle.

SKIM AKREDITASI BADAN-BADAN PENSIJILAN

SCHEME FOR THE ACCREDITATION OF CERTIFICATION BODIES (ACB)