VEHICLE-MOUNTED COMPUTERS

Configuration & Accessories Guide

VH10, VC70, VC80, VC80x, VC8300
 Zebra Vehicle Mounted Computers
Product Family

ZEBRA TECHNOLOGIES 2
 Vehicle Mounted Computers
Configuration & Accessories
Guide

• The Zebra Technologies portfolio of

accessories extends the capabilities
of your VH10, VC70, VC80, VC80x or
VC8300, and enables you to lower
the cost of ownership of your Zebra
mobile computer.
• This simple step-by-step guide is
designed to assist you with the
selection of your accessories based
on your needs and use of the
computers.

ZEBRA TECHNOLOGIES 3
 VEHICLE-MOUNTED COMPUTERS
2
Install Illustration
5

3
STEP ACCESSORY SLIDE

Power Supplies
1 6-14
& Cables

2 Mounts 15-19 6
7
3 Scanners 20-22
4
4 Keyboards 23-25

5 Antennas 26-28
8
6 Voice 29-30

7 Miscellaneous 31-32
1
8 Service Parts 33-35

ZEBRA TECHNOLOGIES 4 4
 Step 1: Power Supplies and Cables
Choose from multiple installation cases

• Plug into an AC wall outlet

– VH10, VC70, VC80, VC80x, VC8300 (Slide 6)
POWER CABLE
• Plug into the Vehicle’s DC power
– VC70 (Slides 7-9)
– VH10, VC80, VC80x, VC8300 (Slides 10-14)

ZEBRA TECHNOLOGIES 5
 Step 1
Power Supplies & Cables

VC80
VH10 VC70 VC80x VC8300

POWERED BY PLUGGING INTO AN AC WALL OUTLET

AC POWER CABLE | ID: 23844-00-00R

US AC line cord, 7.5 feet long, grounded, three wire for the AC power supplies PS1450 and PWR-BGA12V108W0WW. • • •
Associated Countries: United States.

AC POWER SUPPLY for VC70 | ID: PWR-BGA12V108W0WW 

Order country specific 3 wire grounded AC line cord separately.

DC POWER SUPPLY ADAPTER CABLE for VC70 | ID: CBL-DC-389A1-01 •

6.5', required when the PWR-BGA12V108W0WW is used.

AC POWER SUPPLY for VH10, VC80, VC80x & VC8300 | ID: PS1450  
100/240 VAC Power Supply, 12V, 6A, order AC cable separate

AC POWER SUPPLY for VC80 and VC80x | ID: PWR-BGA24V150W0WW 

100/240 VAC Power Supply, 24V, 6.5A, order AC cable separate

ZEBRA TECHNOLOGIES 6
 Step 1:
Power Supplies & Cables

PWRS-9-60VDC-01R

25-159551-01

VC70 VEHICLE MOUNT (DC POWER SUPPLY MOUNTED ON THE VC70)

DC POWER SUPPLY | ID: PWRS-9-60VDC-01R

Buy both

External DC Power supply,VC70, 9-60VDC Requires 25-159551-01 fused DC power cable to vehicle battery

DC POWER CABLE | ID: 25-159551-01

Cable, external 9-60V DC power supply to vehicle battery, 10', includes fuse, VC70. Required for the PWRS-9-60VDC-R

ZEBRA TECHNOLOGIES 7
 Step 1:
Power Supplies & Cables

25-159549-01

PWRS-9-60VDC-01R

25-159551-01

VC70 VEHICLE MOUNT (DC POWER SUPPLY NOT MOUNTED ON THE VC70)

EXTENSION CABLE | ID: 25-159549-01

Buy all of these

Cable, external power supply to VC70 extender. 6.5', VC70. Required when the PWRS-9-60VDC-01R is not mounted on the back of the VC70.

DC POWER SUPPLY | ID: PWRS-9-60VDC-01R

External DC Power supply,VC70, 9-60VDC Requires 25-159551-01 fused DC power cable to vehicle battery

DC POWER CABLE | ID: 25-159551-01

Cable, external 9-60V DC power supply to vehicle battery, 10', includes fuse, VC70. Required for the PWRS-9-60VDC-R

ZEBRA TECHNOLOGIES 8
 Step 1:
Power Supplies & Cables
PWRS-9-60VDC-01R

25-159553-01

VC50 Cable

VC70 VEHICLE MOUNT (WHEN REPLACING THE VC50 AND REUSING THE VC50
DC POWER CABLE)

DC POWER SUPPLY | ID: PWRS-9-60VDC-01R

Buy both

External DC Power supply,VC70, 9-60VDC Requires 25-159551-01 fused DC power cable to vehicle battery

POWER ADAPTER CABLE | ID: 25-159553-01

Cable, external power supply to existing VC5090 power cable (25-71919-03R or 25-71919-04R), includes fuses, 2', VC70

ZEBRA TECHNOLOGIES 9
 Step 1:
Power Supplies & Cables

CA1210 or CA1220

VH10, VC80, VC80x, VC8300 VEHICLE MOUNT (POWER SUPPLY IS INSIDE THE COMPUTER)

DC POWER CABLE | ID: CA1210

Pick one

Power Extension Cable, DC, 6', waterproof

DC POWER CABLE | ID: CA1220

Power Extension Cable DC, 6', waterproof - Includes Screen Blanking feature

ZEBRA TECHNOLOGIES 10
 Step 1:
Power Supplies & Cables

CB000417A01

VC50 Cable

VH10, VC80, VC80x, VC8300 VEHICLE MOUNT (WHEN REPLACING VC50 AND REUSING THE VC50 DC POWER CABLE)

POWER ADAPTER CABLE | ID: CB000417A01

DC Power Adapter to VC50

ZEBRA TECHNOLOGIES 11
 Step 1:
Power Supplies & Cables

CB000416A01

25-159551-01

VH10, VC80, VC80x, VC8300 VEHICLE MOUNT (WHEN REPLACING VC70 AND REUSING THE VC70 DC POWER CABLE)

POWER ADAPTER CABLE | ID: CB000416A01

DC Power Adapter to VC70

ZEBRA TECHNOLOGIES 12
 Step 1:
Power Supplies & Cables
CA1230

PS1370

CA1210

VEHICLE MOUNT (WITH PRE-REGULATOR TO DECREASE VOLTAGE - FOR TRUCKS

VH10, VC80, VC80x, VC8300 WITH BATTERIES GREATER THAN 48V)

DC POWER CABLE | ID: CA1230

Buy all three

Power extension cable for pre-regulator with ignition sense

PRE-REGULATOR | ID: PS1370

Pre-Regulator, 24 - 90 VDC in, 15 VDC out, 90 W

DC POWER CABLE | ID: CA1210

Power Extension Cable, DC, 6', waterproof

ZEBRA TECHNOLOGIES 13
 Step 1:
Power Supplies & Cables

A9169798 or A9169801

Honeywell / LXE Cable

VEHICLE MOUNT (WHEN REPLACING A HONEYWELL/LXE VC AND REUSING THE DC

VH10, VC80, VC80x, VC8300
POWER CABLE)

POWER ADAPTER CABLE | ID: A9169798

Adapter CPC to LXE/Honeywell VX8, VX9, VM1, VM2 AND VM3 DC Power Extension Cable

POWER AND SCREEN BLANKING ADAPTER CABLE | ID: A9169801

Adapter CPC and serial to LXE VX8 and VX9 DC Power Extension and Screen Blanking Cable

ZEBRA TECHNOLOGIES 14
 Step 2:
Mounts

• Your mounting options depend on your computer

– For VH10, VC80, VC80x, VC8300, choose the following (slides 16/17):
• RAM Mount
PLATE
• Quick-Release Mount
• Adapter bracket for 82XX mounts ARM

• Adapter brackets for legacy VCs

– For the VC70, choose one (slide 18):

• RAM Mount
• U Mount
PLATE
• Adapter bracket for VC50 mount

– You can also select a RAM FIXED mount based on your vehicle that works with the VH10, VC70, VC80,
VC80x and VC8300 (slide 19)
ZEBRA TECHNOLOGIES 15
 Step 2:
Mounts Plate Quick Release Mount

Plate

DO YOU NEED A RAM MOUNT, A QUICK RELEASE MOUNT, OR ADAPTERS TO OLD 82XX
FOR VH10, VC80, VC80x, VC8300 MOUNTS?

QUICK RELEASE MOUNT | ID: MT4200

Quick release mount. Attaches to the side of the computer and includes Mounting Plate (MT4205) that attaches to forklift.

PLATE | ID: MT4205

Mounting plate for MT4200, Quick Release Mount, needed if you have one computer for multiple trucks
12

ADAPTER BRACKET | ID: MT4210

Adapter bracket kit for the older 82XX mounts

PLATE | ID: MT3501

VESA plate (for 4" or 12" RAM arm), Can also be attached to Quick Release Mount Plate (MT4205)

PLATE | ID: MT4510

RAM 2"x3" rectangular base with 2.25" rubber ball. Can be attached directly to VH10, VC80, VC80x and VC8300

ZEBRA TECHNOLOGIES 16
 Step 2:
Mounts

FOR VH10, VC80, VC80x, VC8300 DO YOU REPLACE A LEGACY ZEBRA OR HONEYWELL/LXE VC?

ADAPTER FOR VC50 U-MOUNT | ID: MNT-VC80-ADPA1-1

The adapter brackets for the VC50 U-Mount can be used to replace a VC50 by a VH10, VC80, VC80x or a VC8300 and reuse the existing U-Mount.

U-MOUNT, WITH VC70 U-MOUNT HOLE PATTERN | ID: KT-U-MOUNT-VC80-R

The VC80 Series U-Mount is smaller than the one for the VC50 and has several mounting holes which allow drop-in replacements of VC70, and DLoG U-Mounts.
12
It provides step less tilting of the VC and comes with the VC50 adapters.

ADAPTER FOR HONEYWELL U-MOUNT | ID: MNT-VC80-ADPB1-1

The adapter brackets for the Honeywell U-Mount can be used to replace a Honeywell/LXE VC by a VH10, VC80, VC80x or a VC8300 and reuse the existing U-
Mount (Honeywell part number VM1010BRKTKIT).

ZEBRA TECHNOLOGIES 17
 Step 2:
Mounts
Adapter Brackets

FOR THE VC70 DO YOU NEED A RAM MOUNT, AN U MOUNT, OR ADAPTER BRACKETS TO THE VC50 U MOUNT?

RAM MOUNT | ID: RAM-D-2461U-MOTO7

RAM bridge with RAM-D-2461U RAM MOUNT, D (2.25"") size ball with screws. Including screws to mount the PWRS-9-60VDC-01R External DC Power
Supply. Used when replacing equipment already mounted with RAM mounts

RAM MOUNT | ID: RAM-D-2461U-MOTO7B

RAM-D-2461U RAM MOUNT, D (2.25") size ball with screws. Used when the PWRS-9-60VDC-01R External DC Power Supply has to be mounted away or
when AC power supply is used. Used when replacing equipment already mounted with RAM mounts

U MOUNT | ID: KT-U-MOUNT-VC70-R

U mount, VC70, with mounting hardware

ADAPTER BRACKET | ID: KT-VC50ARM3-VC70-R

2 mount adapter arms for VC50 bracket, 3.5", with bolts

ADAPTER BRACKET | ID: KT-VC50ARM7-VC70-R

2 mount adapter arms for VC50 bracket, 7", with bolts

ZEBRA TECHNOLOGIES 18
 Step 2:
Mounts
VH10, VC70, VC80, VC80x, VC8300 DEPENDING ON THE VEHICLE, BELOW ARE THE RAM FIXED MOUNTING
OPTIONS TO THE COMPUTER AND/OR THE VEHICLE.
ARM | ID: MT4301
RAM mount, 4" arm

ARM | ID: MT4302

RAM mount, 12" arm

PLATE | ID: MT3501

VESA plate (for 4" or 12" RAM arm), Can also be attached to Quick Release Mount Plate (MT4205)

PLATE | ID: MT3502

Round plate (for 4" or 12" RAM arm), Uses smaller footprint than MT3501 VESA Plate

BASE | ID: MT3505

Clamp base (for 4" or 12" RAM arm), 2" max. width

BASE | ID: MT3507

Clamp base (for 4" or 12" RAM arm), 3" max. width

BASE | ID: MT3509

Rail base (for 4" or 12" RAM arm), 1-1/4" to 1-7/8"

BASE | ID: MT3510

Rail base (for 4" or 12" RAM arm), 2" to 2 1/2"

BASE | ID: MT4510

RAM 2"x3" rectangular base with 2.25" rubber ball

ZEBRA TECHNOLOGIES 19
 Step 3:
Scanners

• When shopping for scanner cables, choose between

coiled or straight for your scanner and between an
RS232 or USB plug.
• Scanner Cables for LI/DS36XX (slide 21)
• Scanner cables for LS/DS 34XX/35XX (slide 21) SCANNER
HOLDER

• Scanner holders (slide 22)

SCANNER
CABLE

ZEBRA TECHNOLOGIES 20
 Step 3: VC80
VH10 VC8300 VC70
Scanners VC80x

LI/DS36XXXX SCANNER CABLES

RS232 | ID: CBA-RF3-C09ZAR

Photo Not
Available Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, Power Pin 9, TxD on 2, True Converter, -30C
SHIELDED USB | ID: CBA-UF2-C12ZAR
Cable - Shielded USB: Series A Locking Connector for VC70, 12', Coiled, -30C 
RS232 | ID: CBA-R71-C09ZAR
Cable - RS232: DB9 Female Connector, 9ft (2.8m) Coiled, Power Pin 9  
RS232 | ID: CBA-RF2-C09ZAR
 
Photo Not
Available Cable - RS232: DB9 Female Connector, 9ft (2.8m) Coiled, Power Pin 9, -30C
SHIELDED USB | ID: CBA-U46-S07ZAR
Cable - Shielded USB: Series A Connector, 7ft. (2m), Straight, BC 1.2  
SHIELDED USB | ID: CBA-U47-S15ZAR
Photo Not
Available Cable - Shielded USB: Series A Connector, 15ft. (4.6m), Straight, BC 1.2  
SHIELDED USB | ID: CBA-UF1-S07ZAR
Photo Not
Available Cable - Shielded USB: Series A Connector, 7ft. (2m), Straight, BC 1.2, -30C  
LS/DS 34XX/35XX SCANNER CABLES

SHIELDED USB | ID: 25-159548-01 Cable - Shielded USB: Series A Locking Connector for VC70, 12', Coiled, -30C 
RS232 | ID: CBA-R46-C09ZBR
Photo Not
Available Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, Power Pin 9, TxD on 2, True Converter •
RS232 | ID: CBA-R49-C09ZAR
Photo Not
Available Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, Power Pin 9, TxD on 2, True Converter, Low Temp -30C •
RS232 | ID: CBA-R37-C09ZAR
Cable - RS232: DB9 Female Connector, 9ft (2.8m) Coiled, Power Pin 9 • •
USB | ID: CBA-U09-C15ZAR
Photo Not
Available Cable - USB: Series A Connector, 15ft. (4.6m) Coiled • •
SHIELDED USB | ID: CBA-U01-S07ZAR
Photo Not
Available Cable - Shielded USB: Series A Connector, 7ft. (2m), Straight, BC 1.2 • •
SHIELDED USB | ID: CBA-U10-S15ZAR
Photo Not
ZEBRA TECHNOLOGIES
Available
21
Cable - Shielded USB: Series A Connector, 15ft. (4.6m), Straight, BC 1.2 • •
 Step 3:
Scanner Holders
Scanner Holder

Scanner Holder

VC80
VH10 VC8300 VC70
VC80x

SCANNER HOLDER | ID: KT-SCANMNT-VC70-R •

Mounting holder for the scanner. For LS34x8ER, LS35x8ER. Requires KT-ACCMNT-VC70-R Accessory side mount bracket

ACCESSORY MOUNT | ID: KT-ACCMNT-VC70-R 

Accessory side mount bracket

SCANNER HOLDER | ID: KT-SCANMNT-VC80-R  

Side mounted holder for scanner

ZEBRA TECHNOLOGIES 22
 Step 4:
Keyboards

• While the VH10 and the VC8300 have built-in

keyboards, the VC70, VC80 and VC80x give you
multiple options
KEYBOARD
– VC80 and VC80x Keyboards (slide 24)
– VC70 Keyboards (slide 25)

ZEBRA TECHNOLOGIES 23
 Step 4:
VC80 & VC80x Keyboards, Cables and Mounting Options

KEYBOARD | ID: KYBD-AZ-VC-01

VC USB Keyboard AZERTY

KEYBOARD | ID: KYBD-QW-VC80-S-1

USB Keyboard QWERTY with 22 cm cable for VC80/VC80x

KEYBOARD | ID: KYBD-QW-VC80-L-1

USB Keyboard QWERTY with 300 cm cable for VC80/VC80x

KEYBOARD CABLE | ID: CBL-VC80-KBUS1-01

22 cm VC80 Series USB cable for heated Keyboard

KEYBOARD CABLE | ID: CBL-VC80-KBUS2-01

300 cm VC80 Series USB cable for heated Keyboard

KEYBOARD | ID: KYBD-NU-VC70-03R

USB Keyboard QWERTY with 300 cm y-cable for VC70 Freezer

KEYBOARD TRAY | ID: KT-KYBDTRAY-VC80-R

QWERTY/AZERTY Keyboard mounting tray. Includes tilting arms, knobs and screws.

KEYBOARD SIDE MOUNT BRACKET | ID: KYBD-NU-VC80-03R

Function/Numeric keypad side mount bracket

ZEBRA TECHNOLOGIES 24
 Step 4:
VC70 Keyboards, Cables and Mounting Options
KEYBOARD | ID: KYBD-AZ-VC-01
VC USB Keyboard AZERTY

KEYBOARD | ID: KYBD-QW-VC70-S-1

USB Keyboard QWERTY with 18 cm cable for VC70

KEYBOARD | ID: KYBD-QW-VC70-L-1

USB Keyboard QWERTY with 300 cm cable for VC70
KEYBOARD | ID: KYBD-QW-VC70F-S-1
USB Keyboard QWERTY with 37 cm y-cable for VC70 Freezer
KEYBOARD | ID: KYBD-QW-VC70F-L-1
USB Keyboard QWERTY with 300 cm y-cable for VC70 Freezer
KEYBOARD CABLE | ID: CBL-VC70-KBUS1-01
18 cm VC70 USB cable for heated Keyboard
KEYBOARD CABLE | ID: CBL-VC70-KBUS2-01
300 cm VC70 USB cable for heated Keyboard

KEYBOARD CABLE | ID: CBL-VC70-KBUS4-01

37 cm VC70 USB & RS232 Y-cable for heated Keyboard

KEYBOARD CABLE | ID: CBL-VC70-KBUS4-01

300 cm VC70 USB & RS232 Y-cable for heated Keyboard

KEYBOARD | ID: KYBD-NU-VC70-03R

USB Keyboard QWERTY with 300 cm y-cable for VC70 Freezer

KEYBOARD TRAY | ID: KT-KYBDTRAY-VC70-3

QWERTY/AZERTY Keyboard mounting tray. Includes tilting arms, knobs and screws.

KEYBOARD SIDE MOUNT BRACKET | ID: KT-KYBDMNT-VC70-R

Function/Numeric keypad side mount bracket
ZEBRA TECHNOLOGIES 25
 Step 5:
Antennas

• Your options of antennas are wide (slides 27/28):

– Wi-Fi: VH10, VC70, VC80, VC80x, VC8300
– Narrowband: VH10 Only
– GPS: VC80 Only
– Right-angle adapter for installations with little overhead space
• VH10, VC70, VC80, VC80x, VC8300

ZEBRA TECHNOLOGIES 26
 Step 5:
Antennas & Connectivity to choose from

ALL VCS ANTENNAS & CONNECTIVITY FOR WIFI

ANTENNA | ID: 20667-002

Whip antenna (stubby), 802.11 b/g - dipole 2 dBi reverse polarity SMA connector

ANTENNA | ID: AN2010

Antenna, dual band, 802.11 a/b/g/n, 2 dBi, RPSMA connector, magnetic mount, 2.9m

ANTENNA | ID: AN2020

Antenna, 2.4 GHz, 802.11 b/g, 5 dBi, RPSMA connector, magnetic mount, 2.9m
ANTENNA | ID: AN2030
Whip antenna (stubby), dual band, 802.11 a/b/g/n, 2.4GHz 2dBi, 5GHz 3.7 dBi, RPSMA connector, WiFi

VC70 ADAPTERS FOR VC70 TO ATTACH EXTERNAL WIFI ANTENNAS WITH RPSMA CONNECTOR

ADAPTER | ID: RPSMA-RTRPSMA-05R

ANTENNA ADAPTER RPSMA - RTRPSMA, 5-PACK, Required for the VC70 WiFi Antennas

ADAPTER | ID: RPSMA-RTRPSMA-10R

ANTENNA ADAPTER RPSMA - RTRPSMA, 10-PACK, Required for the VC70 WiFi Antennas

ZEBRA TECHNOLOGIES 27
 Step 5:
Antennas & Connectivity to choose from
Antenna

VH10 ANTENNAS & CONNECTIVITY FOR NARROWBAND

ANTENNA | ID: 9009801
Antenna, Narrow Band 1/4 wave, 406-512 MHz 6" NB
MOUNT | ID: 9009792
Mount, Magnetic, for Narrowband, antenna, SMA, 12' cable

VC80 ANTENNA FOR GPS

ANTENNA | ID: AN000090A01

GNSS antenna, magnetic mount, 2.9 m cable

ALL VCS RIGHT ANGLE ADAPTER FOR INSTALLATIONS WITH LITTLE SPACE OVERHEAD, ALL VCS

RIGHT ANGLE ADAPTER | ID: AR1000

Right Angle SMA reverse polarity plug-jack Adapter

ZEBRA TECHNOLOGIES 28
 Step 6:
Voice

• Select from turnkey kits or voice accessories A LA Carte.

• Your Voice options (slide 30)
– Voice

SPEAKER/MIC

SPEAKER

ZEBRA TECHNOLOGIES 29
 Step 6:
Voice
VC80
VH10 VC8300 VC70 VC80x

Photo Not MICROPHONE KIT | ID: KT-MIC-01R

Available This bundle includes the VC70 External PTT mic, the Motorola HMN1089B Water-resistant Palm Microphone or 
equivalent and the KT-ACCMNT-VC70-R Accessory Side mount bracket.

MICROPHONE | ID: HMN1089B 

Push-To-Talk Hand Microphone, GCAI connector, Water Resistant

SIDE MOUNT | ID: KT-ACCMNT-VC70-R •

Accessory Side mount bracket

Photo Not SPEAKER KIT | ID: KT-SPKR-01R

Available This bundle includes the External speaker, the Motorola HSN4039A 13 Watt water-resistant loudspeaker and the •
25-159552-01 VC70 external speaker adapter cable.

SPEAKER | ID: HSN4040A •

External speaker, Motorola HSN4040A 13 Watt water-resistant loudspeaker. Requires 25-159552-01

INTERFACE CABLE | ID: 25-159552-01 •

Speaker cable adapter, for HSN4040A, VC70. Required to connect the HSN4040A external speaker.

SPEAKER/MIC | ID: M1000  

Speaker/Mic with push-to-talk function

ZEBRA TECHNOLOGIES 30
 Step 7:
Miscellaneous

• Don’t forget to consider the following accessories (slide 32)

– Stylus
– Screen protector
– CAN BUS cable
– USB to Ethernet adapter

STYLUS

STYLUS HOLDER

ZEBRA TECHNOLOGIES 31
 Step 7:
Miscellaneous VH10 VC8300 VC70 VC80 VC80x

ID: SL0001    
Stylus and Stylus Holder

ID: VA6200 
Screen Protector Pack of 3

ID: KT-SPRTCT-VC70-05R   
Screen Protector Pack of 5

ID: CA1300    
Screen blanking cable (DB9 to open wires)

ID: CB-000433-01 
CAN Bus Cable (RJ45 to Deutsch)

ID: WA4070    
USB to Ethernet Adapter

ID: 25-159547-01 
Cable DB15M to DB9M, for COM2

ID: SG-VC70-VISR1-01 
VC70 Sun Visor mountable with cut out wing.

Photo Not ID: KT-AREFL-VC83-8-1 

Available Anti Reflection Foil

32ZEBRA TECHNOLOGIES 32
 Step 8:
Service Parts

• Stock up on these essential spare parts (slides 34/35)

– Tool kit
– Keypads
– Touch screens
– Spare battery

ZEBRA TECHNOLOGIES 33
 Step 8:
Service Parts VC80
VH10 VC8300 VC70 VC80x

SERVICE PARTS
Photo Not ID: AL1001 
Available QWERTY Keypad
Photo Not ID: AL1002 
Available AZERTY Keypad
Photo Not ID: AL2002 
Available Front with standard touch screen and function keys
Photo Not ID: AL2002 
Available Front with heated touch screen and function keys

ID: ST2000   •
Modular Services Kit
Photo Not ID: KT-VC80-BTRY1-01  
Available Spare Battery
Photo Not ID: KT-VC80-SCRH1-01 
Available Front with Touch Screen (heated)
ID: KT-VC80-SCRN1-01 
Front with Touch Screen (non-heated)
Photo Not ID: BTRY-VC70IAB00
Available Spare Battery

Photo Not ID: KYBD-QW-VC-01  
Available QWERTY Spare Elastomer for VC USB Keyboard
Photo Not ID: KYBD-AZ-VC-01  
Available AZERTY Spare Elastomer for VC USB Keyboard

ZEBRA TECHNOLOGIES 34
 Step 8:
Service Parts VC80
VH10 VC8300 VC70 VC80x

SERVICE PARTS
ID: SPR-SMA-DC-10   
SMA antenna connector dust caps, pack of 10

ID: TBD 
QWERTY Keypad

ID: TBD 
AZERTY Keypad

ID: TBD 
Front with standard touch screen and function keys

ID: TBD 
Front with heated touch screen and function keys

ZEBRA TECHNOLOGIES 35