VISVESVARAYA TECHNOLOGICAL UNIVERSITY

Jnana Sangama, Belagavi - 590018

Internship Report

on
“TITLE OF THE INTERNSHIP IN BLOCK ETTERS”
Submitted in partial fulfillment for the award of the degree of

BACHELOR OF ENGINEERING
in
MECHATRONICS ENGINEERING
by

Student Name
USN

Internship Carried out

at
Company Name
Internal Guide External Guide
(Name &Designation) (Name &Designation)

DEPARTMENT OF MECHATRONICS ENGINEERING

(Accredited by NBA)
MANGALORE INSTITUTE OF TECHNOLOGY & ENGINEERING
(Accredited by NAAC with A+ Grade, an ISO 9001: 2015 Certified Institution)
Affiliated to V.T.U., Belagavi, Approved by AICTE, New Delhi.
Badaga, Mijar, Moodabidri -574225, Karnataka.

2022-23
 Department of Mechatronics Engineering

CERTIFICATE
This is to certify that the internship work entitled “Title of the Internship report” submitted
by SRIRAM S. (4MT16MT044) is done by him in partial fulfilment for the award of
Bachelor of Engineering in Mechatronics Engineering of the Visvesvaraya Technological
University, Belagavi during the year 2022-23. The work is carried out under the supervision
of Guide Name during 8-7-2019 to7-8-2019.
It is certified that all corrections/suggestions indicated for Internal Assessment have been
incorporated in the report and deposited in the departmental library.
The Internship report has been approved as it satisfies the academic requirements in respect
of project work prescribed for the said degree.

Mr. Chennakeshava Dr. B Mohan Kumar Naik

Supervisor, Asst Professor Head of the Department
Dept. of Mechatronics Engineering Dept. of Mechatronics Engineering

Dr. Prashanth C M
Principal, MITE
External Viva Name of the Examiners Signature with Date

1.

2.
 ACKNOWLEDGEMENTS
I am thankful to our beloved Chairman, Mr. Rajesh Chowta, respected Principal, Dr.
Prashanth C M and the management of Mangalore Institute of Technology and Engineering,
Mangalore for having provided all the facilities that helped us in timely completion of this
project report.
I would like to thank our Head of the Department, Dr. Mohan Kumar Naik, Mechatronics
Engineering for his support.
I heartly convey my deepest thanks to my internal guide Mrs Ashwini T P, Senior Assistant
Professor, Department of Mechatronics Engineering, MITE for her constant monitoring and
guidance provided during the course of this internship work.
The external guide Mr. Jagadesh Puvvala, designation, company name provided the support
to gain knowledge. I would also like to thank him
The Internship opportunity I had with Bharath Electronics Limited was a great chance for
learning and professional development. It was a great learning experience.
I would like to thank all the teaching and non-teaching staff of Department of Mechatronics
Engineering for their valuable help and support.
Finally, I thank my parents for giving encouragement, enthusiasm and invaluable assistance
to me.

SRIRAM S

Department of Mechatronics Engineering, MITE

i
 ABSTRACT
Content: Times New Roman, Font Size 12, Line Spacing 1.5

TABLE OF CONTENTS
Content: Times New Roman, Font Size 12, Line Spacing 1.5

LIST OF FIGURES
Content: Times New Roman, Font Size 12, Line Spacing 1.5

LIST OF TABLES
Content: Times New Roman, Font Size 12, Line Spacing 1.5

LIST OF SYMBOLS
Content: Times New Roman, Font Size 12, Line Spacing 1.5

NOMENCLATURE
Content: Times New Roman, Font Size 12, Line Spacing 1.5

Department of Mechatronics Engineering, MITE

ii
 WEEKLY OVERVIEW OF INTERNSHIP ACTIVITIES
DATE DAY NAME OF THE TOPIC/MODULE COMPLETED

8/7/2019 Monday Reporting to guide and Collecting Id card.

9/7/2019 Tuesday Visit to production line

WEEK 1

10/7/2019 Wednesday Visit to quality assessment and research department

11/7/2019 Thursday Visit to Naval systems lab

12/7/2019 Friday Visit to robotics research lab

13/7/2019 Saturday Meeting on corrosion of metals

DATE DAY NAME OF THE TOPIC/MODULE COMPLETED

15/7/2019 Monday Learnt basics of pan and tilt unit (PTU)

16/7/2019 Tuesday Control unit of PTU working

WEEK 2

17/7/2019 Wednesday Encoders in PTU

18/7/2019 Thursday Applications of PTU

19/7/2019 Friday Learned the steps involved to complete a project

20/7/2019 Saturday Basics of designing a part in a design software

DATE DAY NAME OF THE TOPIC/MODULE COMPLETED

22/7/2019 Monday Usage of SOLIDWORKS and AutoCAD in designing

23/7/2019 Tuesday Various designing methods used in SOLIDWORKS

WEEK 3

24/7/2019 Wednesday Design of fluid flow models

25/7/2019 Thursday Heat transfer analysis in SOLIDWORKS

26/7/2019 Friday Part creation in SOLIDWORKS

DATE DAY NAME OF THE TOPIC/MODULE COMPLETED

28/7/2019 Monday Assembly of parts in SOLIDWORKS

29/7/2019 Tuesday Conversion of parts into drawing

WEEK 4

30/7/2019 Wednesday Editing the drawing in AutoCAD

31/7/2019 Thursday Finalising drawings in AutoCAD

1/8/2019 Friday AutoCAD controls

DATE DAY NAME OF THE TOPIC/MODULE COMPLETED

WE

Department of Mechatronics Engineering, MITE

iii
 2/8/2019 Monday Motion analysis of a simple mechanisms

3/8/2019 Tuesday Motion analysis of cam

EK 5

4/8/2019 Wednesday Motion analysis of internal combustion engine

5/8/2019 Thursday Heat transfer analysis using SOLIDWORKS

6/8/2019 Friday Different views available and animation using SOLIDWORKS

Department of Mechatronics Engineering, MITE

iv
 Title of the Report

CHAPTER 1
INTRODUCTION
Content: Times New Roman, Font Size 12, Line Spacing 1.5
Note: Include the following points in this chapter

 Introduction to the company

 Introduction to the department of the company
 Introduction to the work carried out

OBJECTIVES
Content: Times New Roman, Font Size 12, Line Spacing 1.5

Department of Mechatronics Engineering, MITE

1
 Title of the Report

CHAPTER 2
LITERATURE REVIEW
Content: Times New Roman, Font Size 12, Line Spacing 1.5
Note: Include the following points in this chapter

 Survey if any project work is carried out in the company.

 History/literature related to any case study carried out

Department of Mechatronics Engineering, MITE

2
 Title of the Report

CHAPTER 3
GIVE CHAPTER NUMBERS AND CHAPTER TITLES AS PER YOUR INTERNSHIP
WORK CONSULTING WITH YOUR RESPECTIVE GUIDE

Department of Mechatronics Engineering, MITE

3
 Title of the Report

CHAPTER 4
RESULTS AND DISCUSSION
Content: Times New Roman, Font Size 12, Line Spacing 1.5
Note: Include the following points in this chapter

 Present the results of any project work carried out

 Observations from any case study carried out

Department of Mechatronics Engineering, MITE

4
 Title of the Report

CHAPTER 5
CONCLUSION
Content: Times New Roman, Font Size 12, Line Spacing 1.5
Note: Chapter should include along with the description about the internship work carried out.
Following subtopic should be added in the chapter.

 Learning experience in the company

 Learning experience in the department of the company

Department of Mechatronics Engineering, MITE

5
 Title of the Report

CHAPTER 6
SCOPE FOR FUTURE LEARNING
Content: Times New Roman, Font Size 12, Line Spacing 1.5

 Mention scope of improvements in the project if you have carried out any project work.
 Mention scope for future learning if you have carried out any case study or leaning at the
company.

Department of Mechatronics Engineering, MITE

6
 Title of the Report

REFERENCES
Write the references in IEEE format of referencing
Content: Times New Roman, Font Size 12, Line Spacing 1.5

Department of Mechatronics Engineering, MITE

7