0% found this document useful (0 votes)
524 views

VLC-550 Data Sheet

The Alerton® VisualLogic® VLC-550-E is a versatile, BACnetcompliant, fully programmable field controller designed for fan coils, a/c-units, heat pumps, and other terminal unit applications. As a native BACnet controller, it integrates seamlessly with your BACnet system, communicating at up to 115 Kbps on a BACnet MS/TP LAN

Uploaded by

ngmuthu1981
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
524 views

VLC-550 Data Sheet

The Alerton® VisualLogic® VLC-550-E is a versatile, BACnetcompliant, fully programmable field controller designed for fan coils, a/c-units, heat pumps, and other terminal unit applications. As a native BACnet controller, it integrates seamlessly with your BACnet system, communicating at up to 115 Kbps on a BACnet MS/TP LAN

Uploaded by

ngmuthu1981
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VLC-550-E

The Alerton® VisualLogic® VLC-550-E is a versatile, BACnet-


compliant, fully programmable field controller designed for fan
coils, a/c-units, heat pumps, and other terminal unit applications.
As a native BACnet controller, it integrates seamlessly with your
BACnet system, communicating at up to 115 Kbps on a BACnet
MS/TP LAN.
The VLC-550-E supports the Alerton Microtouch™, as
well as the BACtalk® Microset, Microset II, and Microset 4
intelligent wall sensors, which offer convenient data display,
setpoint adjustment, and technician access to equipment setup
parameters.
All VLC-550-E control logic is programmed using Alerton's
easy-to-learn graphical programming language, VisualLogic™.
Programming and setup data are stored in non-volatile flash
memory, ensuring stable and reliable operation.
High-resolution 16-bit universal inputs are auto-selectable for
thermistor, dry contact, pulse, 0-5 V, 0-10 V, or 4-20 mA.
VISUALLOGIC® UNITARY
FIELD CONTROLLER
FEATURES AND HIGHLIGHTS
• Fully BACnet-compliant on MS/TP LAN at up to 115.2 Kbps.
• Programmable control logic can be field-modified.
• Downloadable operating code to allow for future
software improvements
• 32-bit processor architecture with all program data backed up
in nonvolatile flash memory.
• High-speed processing of DDC program, with an internal
logical loop time of 100 msec.
• Backwards compatible with older VLC-550 and VLC-550C3
models.

APPLICATIONS
Recommended for unit ventilator and fan-coil applications, or any
application that requires multi-speed fan or motor control.

VLC-550-E

UI HBO GBO RO AO AF F
UNIVERSAL HOT SWITCHED TRIAC GROUND SWITCHED
INPUTS BINARY OUTPUTS BINARY OUTPUTS RELAY OUTPUT ANALOG OUTPUTS AIR-FLOW SENSOR FILTER

5 5 0 0 0 - -
© 2019 Honeywell International Inc. All Rights Reserved. LTDATA-VLC-550-E 1219 1
VLC-550-E

TECHNICAL DATA ORDERING INFORMATION


POWER – 24 VAC @ 50-60 Hz. 9 VA minimum (maximum 90 ITEM NUMBER
VA with loads). Half-wave rectified. VLC-550-E ALERTON VISUALLOGIC
INPUTS – 16-bit universal inputs accept 3k (Ibex) or 10k CONTROLLER BACNET
thermistor (type II), dry contact, 0-20 mA, 0-10 V, 0-5V, or
dry-contact pulse. External 250-ohm resistor required for 0-20 CERTIFICATION AND CONFORMANCE
mA inputs. Pulse input maximum frequency of 100 Hz. Pulse BACNET CONFORMANCE – An application specific
input minimum duty cycle 5mS ON / 5mS OFF (pulse input not controller (ASC) level device; tested and approved by BTL. See
supported on IN-0). Protocol Implementation Conformance Statement (PICS).

POWER OUTPUT FOR EXTERNAL SENSORS – 20 UL – Listed Underwriters Laboratory for Open Energy
VDC ±10% @ 100 mA maximum Management Equipment (PAZX) under the UL Standard for
Safety 916; listing includes both U.S. and Canadian certification.
BINARY OUTPUTS – Triacs rated 24 VAC @ 50/60 Hz, 500
mA continuous and 800 mA (AC rms) for 60 milliseconds. EMC – EMC Directive 89/336/EEC (European CE Mark).

MICROSET – Supports BACtalk® Microset, Microset II, or FCC – This device complies with part 15 of the FCC Rules.
Microset 4 on input 0 (IN-0). Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
INPUT/OUTPUT TERMINATIONS – Removable header- must accept any interference received, including interference that
type screw terminals accept 14-24 AWG wire. may cause undesired operation.
MAX DIMENSIONS – 4.9" (125mm) H x 5" (127mm) W x
1.4" (36mm) D
MOUNTING – Screw mounting
ENVIRONMENTAL – 0 to 158°F (-17 to 70°C) / 5 to
95%RH, non-condensing
COMMUNICATIONS – EIA-485 (RS-485) over twisted
shielded-pair (TSP); auto-baud switching (9.6kbps, 19.2kbps,
38.4kbps, 76.8kbps, or 115.2kbps); communication status LED.
PROTOCOLS – BACnet MS/TP (master)
PROGRAMMING – Supports Alerton’s BD4 DDC file format
using Alerton’s VisualLogic® toolset.
MICROPROCESSOR – 32-bit ARM Cortex-M4F, 80 MHz
MEMORY – 512 MB non-volatile flash.
SECURITY – Integrated secure boot prevents loading of
tampered firmware.

16201 25th Avenue W., Lynnwood, WA 98087


Telephone: (425) 921-4900 / Fax: (425) 921-4872
alerton.com / [email protected]

© 2019 Honeywell International Inc. All Rights Reserved. LTDATA-VLC-550-E 1219 2

You might also like